20 2007 C Shop Supplies and Hand Tools - dozerparts

2007Cat® ShopSupplies andHand Tools

PECJ0003 www.cat.com Printed in USA © 2006 Caterpillar All Rights Reserved(Replaces GECJ0001-01)

2007Cat

®ShopSuppliesandHandToolsPECJ0003

1.800.542.8665 option 4 (USA)

1.800.541.8665 option 4 (Illinois)

1.800.523.8665 option 4 (Canada)

Shop Supplies and Hand ToolsSSSSHHTT@@ccaatt..ccoomm (Internet e-mail)

++41 (22) 849 40 48 / 4428 (Geneva Phone)

++41 (22) 849 49 29 (Geneva Fax)

For additional information on our products, use the appropriate link below for you Market:

NACD Dealers:https://nacd.cat.com/infocast/frames/prodsupp/supplies/

APD Dealers:https://apdnet.cat.com/cda/layout?m=54340&x=7

LACD Dealers:https://lacd.cat.com/cda/layout?m=61903&x=7

EAME Dealers:https://eame.cat.com/cda/layout?m=48900&x=7

Caterpillar® Dealers and Customers expect

hard working tools and supplies. Cat Shop

Supplies and Tools Deliver!

Shop Supplies and Tools Catalog 2007

Introduction Section

Hand Tool SectionHand Tools (Inch)Hand Tools (Metric)Miscellaneous Hand ToolsTorque WrenchesPneumatic ToolsElectrical ToolsCasting SalvageTool BoxesSlings

Shop Supplies SectionAbrasiveMetal CuttingCaps and PlugsVisesBattery Service EquipmentVehicular Caterpillar® Batteries and WorklightsLighting/Electrical ProductsPersonal/SafetyDisposal and Storage Products for Hazardous MaterialMaterial Handling, Storage, Packaging, and ShippingHardware and Seal Kits

Chemicals, Lubricants, Adhesives, and Paints SectionAdhesives and SealantsCleanersCoolantsLubricantsGreasesLeak DetectionSolvents and LubricantsSpecialty ProductsPaints

s00.qxp 9/15/06 1:35 PM Page 1

Warranty Introduction


SELF5389-01

Effective with sales to the first user on or after January 1, 2005

CATERPILLAR LIMITED WARRANTYShop Supplies, Tools, Contractor Products, and Caterpillar Service Tools

WorldwideCaterpillar Inc. or any of its subsidiaries (“Caterpillar”) warrants selected Shop Supplies,Tools, Contractor Products and Caterpillar Service Tools to be free from defects in materialand workmanship for the following periods beginning with the date of purchase by the firstuser. Selected products covered by this warranty are identified in the Caterpillar DealerService Tool Catalog (NENG2500) and the Caterpillar Shop Supplies, Tools, and ContractorProducts Warranty Information CD (PERJ0051).

For Diagnostic Tools, Other Designated Tools, Specialty Tools, and Shop Equipment, the warranty periods may be Lifetime, 12 months, 6 months, or as otherwise identified in theCaterpillar Dealer Service Tool Catalog (NENG2500).

For Designated Hand Tools, Contractor Products, Shop Supplies, and Power Tools, thewarranty periods may be Lifetime, 12 months, or 6 months or as otherwise identified in theCaterpillar Shop Supplies, Tools, and Contractor Products Warranty Information CD(PERJ0051).

For Caterpillar Branded Paints, Chemicals, and Shop Fluids, warranty coverage is fordefects at time of purchase or as otherwise identified in the Caterpillar Shop Supplies, Tools,and Contractor Products Warranty Information CD (PERJ0051).

The Caterpillar Dealer Service Tool Catalog (NENG2500) and the Caterpillar Shop Supplies,Tools, and Contractor Products Warranty Information CD (PERJ0051) are available forinspection at Caterpillar dealers and other establishments authorized by Caterpillar.

Caterpillar Responsibilities• If a defect in material or workmanship is found during the warranty period stated above,

Caterpillar will, during normal working hours and at a place of business of a Caterpillardealer or other source approved by Caterpillar, provide (at Caterpillar’s choice) new orrepaired parts or assembled components needed to correct the defect.

Note: Items replaced under this warranty become the property of Caterpillar.

User ResponsibilitiesThe user is responsible for:

• Providing proof of sale date to the first user.

• Taxes, labor or transportation costs, which may result from replacement.

Limitations• Caterpillar is not responsible for failures resulting from alterations, abuse, neglect, normal

wear or any use in which Caterpillar judges improper.

(continued on reverse side…)

SELF5389-01

For products operating outside of Australia, Fiji, Nauru, New Caledonia, New Zealand,Papua New Guinea, the Solomon Islands and Tahiti, the following is applicable:

NEITHER THE FOREGOING EXPRESS WARRANTY NOR ANY OTHER WARRANTYBY CATERPILLAR, EXPRESS OR IMPLIED, IS APPLICABLE TO ANY ITEMCATERPILLAR SELLS WHICH IS WARRANTED DIRECTLY TO THE USER BY ITSMANUFACTURER.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSOR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE. REMEDIES UNDER THIS WARRANTY ARE LIMITEDTO THE PROVISION OF MATERIAL AND SERVICES, AS SPECIFIED HEREIN.CATERPILLAR IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIALDAMAGES.

CATERPILLAR EXLUDES ALL LIABILITY FOR OR ARISING FROM ANY NEGLIGENCEON ITS PART OR THE PART OF ANY OF ITS EMPLOYEES, AGENTS ORREPRESENTATIVES IN RESPECT OF THE MANUFACTURE OR SUPPLY OF GOODSOR THE PROVISION OF SERVICES RELATING TO THE GOODS.

IF OTHERWISE APPLICABLE, THE VIENNA CONVENTION (CONTRACTS FOR THEINTERNATIONAL SALE OF GOODS) IS EXCLUDED IN ITS ENTIRETY.

For products operating in Australia, Fiji, Nauru, New Caledonia, New Zealand, Papua New Guinea, the Solomon Islands and Tahiti, the following is applicable:

THIS WARRANTY IS IN ADDITION TO WARRANTIES AND CONDITIONS IMPLIED BYSTATUTE AND OTHER STATUTORY RIGHTS AND OBLIGATIONS THAT BY ANYAPPLICABLE LAW CANNOT BE EXCLUDED, RESTRICTED OR MODIFIED(“MANDATORY RIGHTS”). ALL OTHER WARRANTIES OR CONDITIOINS,EXPRRESS OR IMPLIED (BY STATUTE OR OTHERWISE), ARE EXCLUDED.

NEITHER THIS WARRANTY NOT ANY OTHER CONDITION OR WARRANTY BYCATERPILLAR, EXPRESS OR IMPLIED (SUBJECT ONLY TO THE MANDATORYRIGHTS), IS APPLICABLE TO ANY ITEM CATERPILLAR SELLS WHICH ISWARRANTED DIRECTLY TO THE USER BY ITS MANUFACTURER.

TO THE EXTENT PERMITTED UNDER THE MANDATORY RIGHTS, IF CATERPILLARIS THE SUPPLIER TO THE USER, CATERPILLAR’S LIABILITY SHALL BE LIMITED ATITS OPTION TO (a) IN THE CASE OF SERVICES, THE SUPPLY OF THE SERVICESAGAIN OR THE PAYMENT OF THE COST OF HAVING THE SERVICES SUPPLIEDAGAIN, AND (b) IN THE CASE OF GOODS, THE REPAIR OR REPLACEMENT OF THEGOODS, THE SUPPLY OF EQUIVALENT GOODS, THE PAYMENT OF THE COST OFSUCH REPAIR OR REPLACEMENT OR THE ACQUISITION OF EQUIVALENT GOODS.

CATERPILLAR EXCLUDES ALL LIABILITY FOR OR ARISING FROM ANYNEGLIGENCE ON ITS PART OR ON THE PART OF ANY OF ITS EMPLOYEES,AGENTS OR REPRESENTATIVES IN RESPECT OF THE MANUFACTURE OR SUPPLYOF GOODS OR THE PROVISION OF SERVICES RELATING TO THE GOODS.

CATERPILLAR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGESUNLESS IMPOSED UNDER MANDATORY RIGHTS.

IF OTHERWISE APPLICABLE, THE VIENNA CONVENTION (CONTRACTS FOR THEINTERNATIONAL SALE OF GOODS) IS EXCLUDED IN ITS ENTIRETY.

This warranty covers every major component of the products. Claims under this warrantyshould be submitted to a place of business of a Caterpillar dealer or other sourceapproved by Caterpillar. For further information concerning either the location to submit claims or Caterpillar as the issuer of this warranty, write Caterpillar Inc., 100 N. E. Adams St., Peoria, IL USA 61629.

s00.qxp 9/15/06 1:35 PM Page 2

Shop Supplies and Tools CatalogPECJ0003

The Shop Supplies and Tools Catalog is a publication that incorporates all of the shop supplies, generalpurpose hand tools, tool boxes, personal safety items and chemicals, lubricants and adhesives for dealerand customer service shops.

All orders placed from the Caterpillar Miscellaneous Material Order System for this publication willautomatically place you on a subscription list.

If you do not wish to receive the supplements and do not wish to be added to the subscription list whenyou order, you must place a verbal order with your order analyst and tell the order analyst at that time notto add your name to the subscription mailing list. However, doing this will prevent you from automaticallyreceiving updates to this catalog in the future.

Ordering ProcedureThe majority of the products listed in PECJ0003 are stocked at Caterpillar parts facilities. Select paint and chemical products listed in PECJ0003 are not stocked but are distributed through Caterpillar's Direct Ship program. All products in PECJ0003 can be ordered through the Caterpillar Parts DistributionSystem using existing stock or emergency ordering procedures.

Prices and Returned GoodsPrices are subject to change without notice. Standard dealer payment terms apply for any product orderedfrom this catalog (whether it is stocked or not).

Returned Goods – All product listed in this catalog is returnable except:• Direct ship and Made as Ordered (MAO) items• Chemicals and Hazardous Materials• Electrical test/diagnostic tools and associated accessories

Dealers should refer to the Cat Dealer Numerical Parts Record (NPR) to determine if a questionable item is returnable or not.

Contact Information1.800.542.8665, option 4 (USA)1.800.541.8665, option 4 (Ilinois)1.800.523.8665, option 4 (Canada)[email protected] (Internet e-mail)++41 (22) 849 40 48/ 4428 (Geneva Phone)++41 (22) 849 49 29 (Geneva Fax)


Introduction Dealer Introduction

s00.qxp 9/15/06 1:35 PM Page 3

s00.qxp 9/15/06 1:35 PM Page 4


Hand ToolsHand Tools (Inch)

Tool Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Socket Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9Individual Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17Ratchets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23

Hand Tools (Metric)Socket Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26Individual Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-32Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34Individual Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-35

Miscellaneous Hand ToolsRatchet Wrenches / Wrenches . . . . . . . . . . . . . . . . . . . . 1-37Sockets / Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . 1-44Hacksaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-45Pry Bars / Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-46Slide Sledge® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-47Shovels and Spades / Level / Tapes . . . . . . . . . . . . . . . 1-49Gauges / Magnets / Pipe Wrenches . . . . . . . . . . . . . . . 1-50Cutters / Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-51Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-52Chisels / Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-53Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-54Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-55Grease Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-56

Torque WrenchesClick Type and Dial Type Torque Wrenches . . . . . . . . . . 1-58Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-59Torque Multipliers / Degree Wheel . . . . . . . . . . . . . . . . 1-60Testers / Air Regulated Torque Wrench Set . . . . . . . . . 1-61Pneumatic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-62Hydraulic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63Hydraulic Pumps / Impact Wrench . . . . . . . . . . . . . . . . 1-65

Pneumatic ToolsImpact Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-66Sanders and Polishers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-69Air Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-70Air Drills / Air Hammers . . . . . . . . . . . . . . . . . . . . . . . . . 1-71Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-72

Electrical ToolsGrinders / Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-75Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-76

Casting SalvageThread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-77Crack Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-78

Tool BoxesCabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-79Metal Storage Chests / Lock . . . . . . . . . . . . . . . . . . . . . 1-82Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-83Plastic Tool Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-84Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-85

SlingsSlings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-88

01a.qxp 10/5/06 1:23 PM Page i

01a.qxp 10/5/06 1:23 PM Page ii

Hand Tools (Inch)

8T-0460 Serviceman’s Tool Set, 117 Piece SetWarranty: See individual part number

• Ideal for servicemen apprentices and shop mechanics• Large assortment of 3⁄8 inch, 1⁄2 inch and 3⁄4 inch drive tools, 1⁄4 inch to 15⁄8 inch

wrenches, pliers, punches, hammers and screwdrivers• Designed for use on heavy equipment• See 8T-0461 Serviceman’s Tool Set, 95 Piece, for a similar but smaller set of tools;

8T-0461 contains complete groups of 1⁄4 inch, 3⁄8 inch and 1⁄2 inch drive tools• Individual hand tools within the group have a Lifetime Warranty• Tool box must be ordered separately

ID: C33421T1

Consist of 8T-0460 Serviceman’s Tool Set, 117 Piece Set

Part No. Description Size3⁄8 inch Drive Tools

8H-8567 Double Hex Socket 7⁄16 in





8H-8576 Adapter 3⁄8 in Female to 1⁄2 in Male

8H-8562 Universal Socket 7⁄16 in





239-6824 Reversible Ratchet 3⁄8 in

8H-8574 Socket Extension 76.2 mm (3.00 in) long


8H-8573 Speeder Handle 3⁄8 in

8S-2274 Double Hex Socket 3⁄8 in

8S-2284 Universal Socket 3⁄8 in1⁄2 inch Drive Tools

1S-0259 Double Hex Socket 1⁄2 in








8H-8556 Double Hex Socket 1 in

8H-8560 Universal Joint 1⁄2 in



8H-8559 Socket Extension 1⁄2 in, 279.0 mm (11.00 in) long

168-0383 Breaker Bar 1⁄2 in3⁄4 inch Drive Tools

8H-8529 Socket 3⁄4 in


8H-8531 Socket 15⁄16 in

8H-8532 Socket 1 in

8H-8533 Socket 11⁄16 in


Consist of 8T-0460 Serviceman’s Tool Set, 117 Piece Set (cont’d)

Part No. Description Size

3⁄4 inch Drive Tools (cont’d)


8H-8536 Socket 15⁄16 in



8H-8538 Socket 111⁄16 in



8H-8542 Socket 2 in


8H-8544 Socket 23⁄16 in


160-6389 Reversible Ratchet Head 3⁄4 in

8H-8546 Breaker Bar 3⁄4 in

162-8716 Ratchet Head Handle


Combination Wrenches

4C-9604 Combination Wrench 1⁄4 in






1S-0254 Combination Wrench 9⁄16 in (short)







4C-9602 Combination Wrench (2) 15⁄16 in

4C-9603 Combination Wrench 1 in

8H-8516 Combination Wrench 11⁄6 in

8H-8517 Combination Wrench (2) 11⁄8 in



8H-8520 Combination Wrench 13⁄8 in (short)



8H-8501 Open End Tappet Wrench (2) 1⁄2 in x 9⁄16 in

Shop Supplies and Tools Catalog 2007 1-1

Hand Tools (Inch) Tool SetsH

and Tools

01a.qxp 10/5/06 1:23 PM Page 1

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight

pulfejl

Highlight



Sockets Designed for Twelve Point Shoulder Bolts

8S-1602 Tool Box

261-0444 Adapter 1⁄2 in Female to 3⁄8 in Male

8S-1589 Socket 1⁄4 in







8S-1596 Socket 11⁄16 in


8S-1598 Socket 13⁄16 in


8S-1600 Socket 15⁄16 in

8S-1601 Socket 1 in

Pliers, Punches, Screwdrivers and Hammers

8H-8577 Ball Peen Hammer1 2 lb

1S-0257 Ball Peen Hammer1 12 oz

1S-0258 Soft Face Hammer1 32 oz

8H-8581 Feeler Gauge1 25 blade, .0015 in - .025 in

1F-1159 Center Punch1 3⁄16 in, 152.4 mm (6.00 in) long



Pliers, Punches, Screwdrivers and Hammers (cont’d)

8H-8579 Punch1 .38 in Point, 203.2 mm (8.00 in) long

8H-8578 Punch1 .56 in Point, 241.3 mm (9.50 in) long

1F-1160 Chisel1 3⁄8 in Edge, 139.7 mm (5.50 in) long


6V-6193 Heavy-Duty Diagonal Cutter 190.5 mm (7.50 in)

6V-6192 Slip Joint Pliers 190.5 mm (7.50 in) long

6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)

6V-6194 Needle Nose Pliers 182.1 mm (7.19 in)

8H-8582 Vise Grip Wrench 254.0 mm (10.00 in)

8H-8580 Straight Blade Scraper1 38.1 mm (1.50 in) wide

6V-7937 Screwdriver Cabinet 239.78 mm (9.44 in) Blade

6V-7933 Plastic Handle Screwdriver 5⁄16 in tip, 277.11 mm (10.91 in) long

277-8790 Plastic Handle Screwdriver 452.0 mm (17.79 in) Blade

6V-7934 Screwdriver No. 2 Phillips tip, 213.6 mm (8.41 in) long

6V-7935 Screwdriver 1⁄4 in tip, 212.85 mm (8.38 in) long




5F-4764 Crowfoot Bar1 406.4 mm (16.00 in) long1 Warranty: Six Months

8T-0461 Serviceman’s Tool Set, 95 Piece SetWarranty: See individual part number

• Similar to 8T-0460 Serviceman’s Tool Set, except in drive tools• 8T-0461 set contains complete groups of 1⁄4 inch, 3⁄8 inch and 1⁄2 inch drive tools;

whereas the 8T-0460 set contains 3⁄8 inch, 1⁄2 inch and 3⁄4 inch drive tools• Individual hand tools within the group have a Lifetime Warranty; hand tools within

a group will be warranted when necessary• Tool box must be ordered separately

ID: C33528T1Consist of 8T-0461 Serviceman’s Tool Set, 95 Piece Set







9S-1716 Socket 11⁄32 in




9S-1720 Socket Extension 50.8 mm (2.00 in)


9S-1722 Socket Driver 1⁄4 in


9S-1724 Universal Joint

9S-1725 Socket Case

9S-2573 Deep Well Socket 3⁄8 in



8S-2284 Universal Socket 3⁄8 in





9S-1727 Universal Socket 11⁄16 in







9S-1728 Socket 11⁄16 in



8H-8573 Speeder Handle

8H-8574 Socket Extension 3 in

8H-8575 Socket Extension 6 in


261-0444 Adapter 1⁄2 in Female to 3⁄8 in Male

8S-1589 Socket 1⁄4 in (12 Point)

8S-1590 Socket 5⁄16 in (12 Point)

1-2 Shop Supplies and Tools Catalog 2007

Tool Sets Hand Tools (Inch)H

and

Tool

s

01a.qxp 10/5/06 1:23 PM Page 2






8H-8551 Socket 11⁄16 in


8H-8553 Socket 13⁄16 in


8H-8555 Socket 15⁄16 in

8H-8556 Socket 1 in

9S-1729 Socket 1 1⁄16 in




168-0383 Breaker Bar 1⁄2 in

8H-8559 Socket Extension 279.0 mm (11.00 in)


Combination Wrenches

8H-8501 Open End Wrench (2) 1⁄2 in x 9⁄16 in













4C-9603 Combination Wrench 1 in


1S-0254 Combination Wrench 9⁄16 in ( short)



Pliers, Punches, Screwdrivers and Hammers

1F-1159 Center Punch1 3⁄16 in, 152.4 mm (6.00 in) long

8H-8578 Punch1 3⁄8 in Point, 241.3 mm (9.50 in) long

8H-8579 Punch1 5⁄32 in Point, 203.2 mm (8.00 in) long



5F-4764 Crowfoot Bar1 406.4 mm (16.00 in) long


6V-7937 Screwdriver 239.78 mm (9.44 in)





6V-6193 Diagonal Cutter 109.5 mm (7.50 in)

8H-8582 Vise Grip 254 mm (10.00 in)


6V-6192 Slip Joint Pliers 191.8 mm (7.50 in)

6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)

1S-0257 Ball Peen Hammer1 340.2 g (12 oz)

1S-0258 Soft Face Hammer1 907.2 g (32 oz) (Serviceable parts of the hammer — 1 Medium Tip 3S-0460, 1 Hard Tip 3S-0459)

8H-8580 Scraper1 38.1 mm (1.50 in) wide

8H-8581 Feeler Gauge1 25 blade, .0015 in - .025 in

208-6183 Hacksaw 419.0 mm (16.50 in) long

9S-1743 Ferrule Nut Wrench 3⁄4 in-1 in

9S-1742 Hex Key Wrench Assembly 9 bits1 Warranty: Six Months

222-7876 Student Tool SetWarranty: See individual part number

• A specially selected set of basic hand tools for students in the Caterpillar® Model Dealer Service Technician Program• Premier quality tools for the work done in th classroom and on the job• Over 200 tools

Part No. Description

1U-5545 Metric Wrench Group

1U-7321 Standard Flashlight

2P-5490 Well Socket Group

5P-1720 Seal Pick

5P-3277 Measuring Tape

5P-3920 Steel Rule

8T-0461 Serviceman‘s Tool Group

139-2645 Safety Glasses

146-2728 Flex Pickup Tool

194-3574 Metric Socket Set



194-3584 Torx Socket Set

194-3585 Hex Bit Socket Set



200-1928 Fractional Hex Key Set

200-1929 Metric Hex Key Set

200-1931 Metric Hex Key Set




and Tools

ID: D00497T1

01a.qxp 10/5/06 1:23 PM Page 3

211-0616 Hand Tool SetWarranty: See individual part numbers

• For performing routine adjustment and maintenance of all Track-Type Tractors, Track-Type Loaders and Engines

ID: D00905T1


1S-0259 Socket, 1⁄2 in, 1⁄2 in drive, 12 Pt.

4C-9592 Combination Wrench, 3⁄8 in






4C-9603 Combination Wrench, 1 in


5F-4764 Pry Bar, 406.4 mm (16.00 in) long

6V-7934 Screwdriver, PHILLIPS™ No. 2,213.6 mm (8.41 in) long

6V-7935 Screwdriver, Standard 1⁄4 in tip,212.85 mm (8.38 in) long

8F-9866 Grease Gun

8H-8549 Socket, 9⁄16 in, 1⁄2 in drive, 12 Pt.




8H-8556 Socket, 1 in, 1⁄2 in drive, 12 Pt.

8H-8559 Socket Extension, 1⁄2 in drive,254.0 mm (10.00 in) long

8H-8581 Feeler Gauge, 25 blade, .0015 in to .025 in


9S-1732 Socket Extension, 1⁄2 in drive,127.0 mm (5.00 in) long

239-6826 Reversible Ratchet, 1⁄2 in drive

185-3630 Filter Strap Wrench

211-0136 Tool Bag (not shown)

212-8144 Petcock Socket, 1⁄2 in drive

212-8145 Drain Plug Socket, 1⁄2 in Female, 3⁄4 in Male

213-1983 Combination Pliers, 167.0 mm (6.60 in) long

211-0617 Hand Tool SetWarranty: See individual part numbers

• For routine maintenance and adjustment of all rubber-tired machines (Wheel Loaders, Motor Graders, Skidders, Solid Frame Off Highway Trucks, Wheel Tractors, Backhoe Loaders and Integrated Toolcarriers)

ID: C66976T1


1P-0545 Tire Pressure Gauge










6V-7932 Screwdriver, Standard 3⁄8 in tip, 323.9 mm (12.75 in) long

6V-7934 Screwdriver, PHILLIPS™ No.2, 213.6 mm (8.41 in) long

8F-9866 Grease Gun












8H-8559 Socket Extension, 1⁄2 in drive, 254.0 mm (10.00 in) long





212-8144 Petcock Socket, 1⁄2 in drive


213-1985 Sliding T-Handle, 1⁄2 in drive, 304.8 mm (12.00 in) long



and

Tool

s

01a.qxp 10/5/06 1:23 PM Page 4

ID: C78539T1

214-6153 Hand Tool GroupWarranty: See individual part number

• Use for routine maintenance adjustments on rear engine Track-Type Loaders such as the 943, 953, 963 and 973

ID: D00473T1


8H-8549 Socket, 9⁄16 in

8H-8552 Socket, 3⁄4 in

8H-8554 Socket, 7⁄8 in

8H-8556 Socket, 1 in

8H-8559 Socket Extension, 1⁄2 in, 254.0 mm (10.00 in) long

239-6826 Reversible Ratchet

9U-7419 Hex Bit

6V-7935 Screwdriver, 1⁄4 in Tip

261-0444 Plug Socket, 1⁄2 in Female, 3⁄8 in Male






8F-9866 Grease Gun


212-8144 Petcock Socket

213-1983 Pliers

211-0136 Tool Bag, 610.0 mm x 203.0 mm x 159.0 mm(24.00 in x 8.00 in x 6.25 in) (Not shown)


Wrench sizes (English), 7⁄16, 1⁄2, 13⁄16, 7⁄8 and 15⁄16

Wrench sizes (Metric), 14 and 17

Socket size (English and Metric, 1⁄2 in drive), 15⁄16 and 17.0 mm

Socket size (Metric, 3⁄4 in drive), 28.0 mm

“T” handles, 1⁄2 and 3⁄4 in drive

Extension, 3⁄4 in drive

Screwdrivers, #2 Phillips and 1⁄4 in flat

Pliers, (1) slip joint and (1) retaining ring

8F-9866 Grease gun w/ Flex Hose

Socket, 3⁄8 in drive, T30 Torx Bit

185-3630 Strap Wrench

Tool Bag

209-9239 Hand Tool SetModel: 910E Wheel Loader, 12B and 14B Integrated Tool CarriersWarranty: See individual part number

• For routine maintenance and adjustments

ID: D00941T1


1P-0545 Tire Pressure Gauge 1

1S-0255 Combination Pliers, 163.5 mm (6.44 in) long




5F-4764 Pry Bar, 406.4 mm (16.00 in) long 1

6V-7932 Standard Screwdriver, 3⁄8 in tip, 323.9 mm (12.75 in) long


6V-7933 Standard Screwdriver, 5⁄16 in tip, 277.11 mm (10.91 in)

6V-9093 Combination Wrench, 13.0 mm



8F-9866 Grease Gun 1




8H-8556 Socket, 1 in, 1⁄2 in drive, 12 Pt.

8H-8559 Socket Extension, 1⁄2 in drive, 254.0 mm (10.00 in) long

8H-8561 Socket Drive Adapter, 1⁄2 in Female, 3⁄4 in Male




185-3630 Filter Strap Wrench 1

211-0136 Tool Bag (not shown)


213-1985 Sliding T-Handle, 1⁄2 in drive, 304.8 mm (12.00 in) long

213-3088 Socket, 9⁄16 in, 1⁄2 in drive, 6 Pt.

213-6926 Impact Socket, 10.0 mm, 1⁄2 in drive, 6 Pt.




213-6936 Impact Socket, 19.0 mm, 1⁄2 in drive, 6 Pt.1 Warranty: Six Months



and Tools

133-8877 Field Tool GroupModel: 416C, 426C, 436C, 428C, and 438C Backhoe LoadersWarranty: See individual part numbers

• Used to perform routine maintenance and adjustment operations on C-series Backhoe Loaders

• Group includes 20 required hand tools• Features both English and Metric wrenches and sockets• Includes “T” handle wrench and extension for wheel

lug removal and installation• Canvas bag provides adequate storage even in limited space

01a.qxp 10/5/06 1:23 PM Page 5

214-7318 Hand Tool GroupModel: All 300 Series ExcavatorsWarranty: See individual part number

• Used for routine maintenance and adjustment• Flat top tool box provides adequate storage for all tools in this group• Using proper tools reduces downtime

ID: C44388T1

ID: C78558T1

144-4674 Field Tool GroupModel: 914G, 924F and 928G Wheel LoadersWarranty: See individual part numbers

• Used to perform routine maintenance and adjustment operations• Group contains 25 individual hand tools• Features both English and Metric wrenches and sockets• Includes Cat grease gun, filter wrench and tire pressure gauge• Canvas bag provides adequate storage even in limited space


Hand wrench sizes SAE, 3⁄4, 13⁄16, 11⁄8, 13⁄8 and 15⁄8 in

Hand wrench sizes, (Metric) 10.0, 13.0, 16.0, 18.0 and 19.0 mm

Socket sizes, (Metric) 10.0, 13.0, 16.0 and 19.0 mm x 3⁄8 in drive

Screwdrivers, #2 Phillips and 1⁄4 in flat

Pliers, 1 slip joint

Ratchet, 3⁄8 in drive

Adapter, 3⁄8 in female to 1⁄2 in male

Extension, 152.4 mm (6.00 in) x 3⁄8 in drive

Torx Socket drivers, T30 and T50 x 3⁄8 in drive

8F-9866 Grease gun w/Flex Hose

1P-0545 Tire Pressure Gauge

185-3630 Strap wrench

Tool Bag



261-0444 Socket Adapter 1⁄2 in Female to 3⁄8 in Male

9S-1732 Socket Extension, 1⁄2 in drive, 127.0 mm (5.00 in) long

194-3535 Socket, Assembly, T30

194-3538 Socket, Assembly, T50

194-3565 Socket, 30 mm, 1⁄2 in drive, 12 Pt.




213-6929 Impact Socket, 13.0 mm, 1⁄2 in drive. 6 Pt.

6V-9111 Socket, 16.0 mm, 1⁄2 in drive, 12 Pt.




1U-7563 Hex Wrench, 4.0 mm






1U-7585 Hex Wrench, 5⁄8 in









214-7222 Combination Wrench, 32.0 mm


8H-8424 Combination Wrench, 11⁄2 in

214-7330 Combination Wrench, 15⁄16 jaw range

214-7329 Open End Wrench, 41.0 mm


8F-9866 Grease Gun


9U-7968 Pry Bar


1S-0255 Combination Pliers, 163.5 mm (6.44 in) long

8H-8577 Ball Peen Hammer, 2 lb


9U-6219 Tool Box



and

Tool

s

01a.qxp 10/5/06 1:23 PM Page 6

214-7219 Hand Tool GroupWarranty: See individual part number

• For routine maintenance and adjustments

ID: A92065T1


8H-8549 Socket, 9⁄16 in

8H-8556 Socket, 1 in

8H-8559 Socket Extension, 1⁄2 in, 254.0 mm (10.00 in) long

8H-8581 Feeler Gauge

6V-7932 Standard Screwdriver, 3⁄8 in tip





8F-9866 Grease Gun


213-1985 Sliding T-Handle

152-4942 Field Tool GroupModel: 902, 906, and 908 Compact Wheel LoaderWarranty: See individual part number

• Used to perform routine maintenance and adjustments• Includes 12 required hand tools• Includes both English and metric wrenches and screwdrivers• Roll-up tool pouch provides good storage in limited space

ID: C79736T1

Open end wrenches 10.0, 11.0, 12.0, 13.0, 16.0, 17.0, 18.0, and 19.0 mm

Hex wrench 4.0 mm

Screwdrivers #2 Phillips and 1⁄4 in flat tip

Ball peen hammer 16 oz.

Adjustable wrench 8.00 in

Filter band wrench 33⁄4 in diameter

T-bar and sliding head 12.00 in long x 1⁄2 in square drive

Deep socket 11⁄8 in, 6 point, 1⁄2 in square drive

157-0674 Hand Tool GroupModel: 972G Wheel LoaderWarranty: See individual part number

• Used to perform routine maintenance and adjustment• Twenty six (26) individual hand tools• Metric wrenches and sockets accommodate fasteners and fittings on wheel loader• Reduce downtime by using proper tools

ID: C79718T1


1P-0545 Tire Gauge Group

8H-8546 Breakover Bar Head

162-8716 Handle

8H-8548 Extension

8H-8559 Extension

213-1985 Sliding T-Handle

8H-8581 Feeler Gauge

6V-7932 Screwdriver

6V-7934 Screwdriver

5F-4764 Pry Bar

8F-9866 Grease Gun Assembly

1U-5548 Wrench, 8.0 mm

6V-9090 Wrench, 10.0 mm

6V-9093 Wrench, 13.0 mm


6V-9097 Wrench, 17.0 mm

6V-9099 Wrench, 19.0 mm


199-6150 Socket, 13.0 mm

6V-9112 Socket, 17.0 mm

6V-9114 Socket, 19.0 mm

6V-9116 Socket, 22.0 mm

199-6154 Socket, 24 mm

6V-9118 Socket, 30 mm



212-8145 Plug Socket

212-8144 Petcock Socket



and Tools

01a.qxp 10/5/06 1:23 PM Page 7

Service Groups for Harvester Head, Tree Harvester, and ForwarderModel: HH55 and HH65 Harvester Head (Skogsjan); 550, 560, 570, and 580 Tree Harvester (Skogsjan); 554 and 574 Forwarder (Skogsjan)Essential ToolWarranty: See individual part numbers

• Used to perform routine maintenance and adjustment operations• 197-1880 Service Group contains hand tools needed in addition to 197-5088 Service Group for harvester• All tools are serviced separately

197-1880 Service Group (Tree Harvester)


1B-7810 Ball Peen Hammer


1P-2853 Spanner Wrench

1U-5545 Metric Wrench Group

4C-5742 Pry Bar, 46.00 in long

4C-9600 Wrench Tool Group

5F-4764 Pry Bar, 16.00 in long

6V-3989 Unvalved Nipple, qty. 3

6V-6195 Pliers

6V-7933 Screwdriver, 5⁄16 in tip

6V-7934 Screwdriver, No. 2 Phillips tip




6V-9102 Wrench, 22.00 mm

6V-9104 Wrench, 30.00 mm



8H-8423 Wrench, 15⁄8 in

8H-8516 Wrench, 11⁄16 in

8H-8520 Wrench, 13⁄8 in

8H-8559 Socket Extension, 1⁄2 in Drive

8T-0855 Pressure Gauge



8T-5183 Drive Extension

9U-6219 Tool Box

9U-6533 Impact Socket, 30 mm

9U-6536 Impact Socket, 33 mm

239-6824 Reversible Ratchet, 3⁄8 in Drive

160-6389 Ratchet Head, 3⁄4 in Drive

161-8953 Hex Wrench, 6.00 mm

161-8954 File

161-8955 File Handle

161-8958 Pump Wrench Assembly

162-8716 Ratchet Handle, 3⁄4 in Drive

163-4468 Hose Assembly, qty. 2

164-3171 Spanner Wrench

175-7546 Cutter Group

185-3630 Wrench Assembly



200-1929 Hex Key Set, Metric

214-7218 Wrench, 27 mm

214-7223 Wrench, 36 mm

214-7324 Torx® Bit Set

214-7330 Adjustable Wrench, 12.0 in


214-7333 Flex Head Ratchet, 1⁄2 in Drive

214-7342 Screwdriver, No. 3 Phillips tip

197-5088 Service Group (Harvester Head)


161-5346 Shackle, qty. 4

161-5347 Link, qty. 4

161-8953 Hex Wrench, 6.0 mm

161-8956 Cleaning Hook

164-3171 Spanner Wrench

164-5047 Chain Tool

224-0851 Chain

224-0853 Chain

197-3672 Saw Adjustment Wrench

197-1877 Service Group (Forwarder)


1B-7810 Ball Peen Hammer


1U-5545 Metrcic Wrench Group

4C-5742 Pry Bar, 46.00 in long

4C-9600 Wrench Tool Group

5P-0946 Tool Box

6V-3989 Unvalved Nipple, qty. 3

6V-4143 Coupler Assembly, qty. 2






6V-9102 Wrench, 22.0 mm

6V-9104 Wrench, 30.0 mm



8H-8516 Wrench, 11⁄16 in

8H-8520 Wrench, 13⁄8 in




8T-5183 Drive Extension

9U-6533 Impact Socket, 30.0 mm



127-2279 Open End Wrench, 15⁄8 in

160-6389 Ratchet Head, 3⁄4 in Drive

161-8958 Pump Wrench Assembly

162-8716 Ratchet Handle, 3⁄4 in Drive

175-7546 Cutter Group

177-7860 Hose Assembly



200-1929 Hex Key Set, Metric

214-7218 Wrench, 27 mm

214-7223 Wrench, 36 mm

214-7324 Torx® Bit Set



214-7342 Screwdriver, No. 3 Phillips tip



and

Tool

s

01a.qxp 10/5/06 1:23 PM Page 8

207-1515 Hand Tool SetSMCS Code: 0600Model: AllWarranty: See below

• Basic maintenance tool group• Contains 21 individual hand tools• Includes canvas bag for storing or transporting tools• Warranty: Canvas bag, grease gun, and strap wrench

assembly have a 6 month warranty; all other hand tools have a lifetime warranty

ID: C80516T1Part No. Description

8F-9866 Grease Gun

8H-8581 Feeler Gauge, 25 Blade

6V-7933 Plastic Handle Screwdriver [277.11 mm (10.91 in) blade]

239-6826 Reversible Ratchet, 1⁄2 inch square drive

9S-1732 Socket Extension [127.0 mm (5.00 in) long]

185-3630 Spin-On Filter Strap Wrench Assembly

5F-4764 Rolling Head Pry Bar [406.0 mm (16.00 in) long]

6V-7934 Phillips Screwdriver No. 2














1U-7585 Hex Wrench, 5⁄8 inch

256-4816 Hand Tool GroupModel: AllWarranty: See individual part number

• Used for routine maintenance and adjustment• Flat top tool box provides adequate storage for

all tools in this group• Using proper tools reduces downtime



9S-1732 Socket Extension, 1⁄2 in drive, 127.0 mm (5.00 in) long





213-6929 Impact Socket, 13.0 mm, 1⁄2 in drive. 6 Pt.




1U-7585 Hex Wrench, 5⁄8 in










214-7329 Open End Wrench, 41.0 mm

214-7322 Adjustable Wrench, 8 in

200-1929 Hex Key Socket, Metric

214-7324 Torx Bit Set

256-4879 Torx Wrench, T50


8F-9866 Grease Gun

9U-7968 Pry Bar


8H-8577 Ball Peen Hammer, 2 lb

9U-6219 Tool Box

213-4443 Socket Set, 17 Piece, 1⁄4 inch DriveWarranty: See individual part number

• 12 point• 1⁄4 inch square drive• Standard length sockets• Chrome finish

ID: C07884T1

Size Part No. Length3⁄16 in 9S-1711 22.2 mm (.88 in)7⁄32 in 9S-1712 22.2 mm (.88 in)1⁄4 in 9S-1713 22.2 mm (.88 in)9⁄32 in 9S-1714 22.2 mm (.88 in)5⁄16 in 9S-1715 22.2 mm (.88 in)11⁄32 in 9S-1716 22.2 mm (.88 in)3⁄8 in 9S-1717 22.2 mm (.88 in)7⁄16 in 9S-1718 22.2 mm (.88 in)1⁄2 in 9S-1719 22.2 mm (.88 in)


Hand Tools (Inch) Tool Sets / Socket SetsH

and Tools

Accessories included




9S-1722 Socket Driver 1⁄4 in


9S-1724 Universal Joint

213-4437 Adapter (not shown) 1⁄4 in female to 3⁄8 in male

261-0443 Adapter (not shown) 3⁄8 in female to 1⁄4 in male

9S-1725 Case1

1 Warranty: Six Months

01a.qxp 10/5/06 1:23 PM Page 9

ID: C79490T1


• 6 point• 1⁄4 inch square drive• Deep length sockets• Chrome finish• Includes socket bar and clips

ID: C33405T1

Size Part No. Length3⁄16 in 213-9967 50.8 mm (2.00 in)7⁄32 in 213-9968 50.8 mm (2.00 in)1⁄4 in 213-9969 50.8 mm (2.00 in)9⁄32 in 213-9970 50.8 mm (2.00 in)5⁄16 in 213-9971 50.8 mm (2.00 in)11⁄32 in 213-9972 50.8 mm (2.00 in)3⁄8 in 213-9974 50.8 mm (2.00 in)7⁄16 in 213-9978 50.8 mm (2.00 in)1⁄2 in 213-9980 50.8 mm (2.00 in)9⁄16 in 213-9981 50.8 mm (2.00 in)

9S-1746 Socket Set, 11 Piece, 3⁄8 inch DriveWarranty: See individual part number

• 12 point• 3⁄8 inch square drive• Chrome finish

Size Part No. Length3⁄8 in 8S-2274 23.0 mm (.91 in)7⁄16 in 8H-8567 23.0 mm (.91 in)1⁄2 in 8H-8568 23.8 mm (.94 in)9⁄16 in 8H-8569 24.6 mm (.97 in)5⁄8 in 8H-8570 26.2 mm (1.03 in)11⁄16 in 9S-1728 27.0 mm (1.06 in)3⁄4 in 8H-8571 27.8 mm (1.09 in)

Accessories included



8H-8573 Speeder Handle




• 6 point• 3⁄8 inch square drive• Standard length sockets• Chrome finish• Includes socket bar and clips ID: D00437T1

Size Part No. Length3⁄8 in 214-1144 23.1 mm (0.91 in)7⁄16 in 214-1145 23.1 mm (0.91 in)1⁄2 in 214-1146 23.9 mm (0.94 in)9⁄16 in 214-1147 26.2 mm (1.03 in)5⁄8 in 214-1148 27.7 mm (1.09 in)11⁄16 in 214-1149 28.7 mm (1.13 in)3⁄4 in 214-1150 30.2 mm (1.19 in)

241-0873 Twist Socket Set, 13 Piece, 3⁄8 inch DriveWarranty: Lifetime

• SAE / Metric impact sockets quickly and easily remove damaged or rounded nuts and bolts• 6 fluted sockets grip onto fastener and tighten as more torque is applied (no hammering required to install socket over fastener)• Applications include oil pan drain plugs, exhaust manifold nuts, studs, pipe nipples, and corroded marine fasteners• Shallow depth• Fits sizes from 10 to 19 mm (3⁄8 to 3⁄4 inch) • 3⁄8 inch square drive• Standard length• Industrial black finish• Includes plastic tray, socket bar, and clips• Can be ordered by set or individual

ID: D00971T1


Socket Sets Hand Tools (Inch)H

and

Tool

s

Size Part No. Length

10 mm 241-0860 31.8 mm (11⁄4 in)

12 mm 241-0861 31.8 mm (11⁄4 in)

13 mm 241-0862 31.8 mm (11⁄4 in)

14 mm 241-0863 31.8 mm (11⁄4 in)

15 mm 241-0864 31.8 mm (11⁄4 in)

17 mm 241-0865 31.8 mm (11⁄4 in)3⁄8 in 241-0866 31.8 mm (11⁄4 in)

11 mm 241-0867 31.8 mm (11⁄4 in)1⁄2 in 241-0868 31.8 mm (11⁄4 in)9⁄16 in 241-0869 31.8 mm (11⁄4 in)

16 mm 241-0870 31.8 mm (11⁄4 in)11⁄16 in 241-0871 34.9 mm (13⁄8 in)

19 mm 241-0872 34.9 mm (13⁄8 in)

01a.qxp 10/5/06 1:23 PM Page 10

ID: D01744T1


• 6 point• 3⁄8 inch square drive• Deep length sockets• Polished chrome finish• Includes socket bar and clips

ID: C33206T1

Size Part No. Length3⁄8 in 214-1152 54.0 mm (2.13 in)7⁄16 in 214-1153 54.0 mm (2.13 in)1⁄2 in 214-1154 60.3 mm (2.38 in)9⁄16 in 214-1155 60.3 mm (2.38 in)5⁄8 in 214-1156 60.3 mm (2.38 in)11⁄16 in 214-1157 66.7 mm (2.63 in)3⁄4 in 214-1158 66.7 mm (2.63 in)13⁄16 in 214-1159 69.9 mm (2.75 in)7⁄8 in 214-1160 69.9 mm (2.75 in)


• 12 point• 3⁄8 inch square drive• Deep length sockets• Chrome finish• Includes socket bar and clips

ID: D00443T1

Size Part No. Length3⁄8 in 214-6491 54.1 mm (2.13 in)7⁄16 in 214-6492 54.1 mm (2.13 in)1⁄2 in 214-6493 60.5 mm (2.38 in)9⁄16 in 8S-2357 60.5 mm (2.38 in)5⁄8 in 9S-5031 60.5 mm (2.38 in)11⁄16 in 214-6494 66.8 mm (2.63 in)3⁄4 in 214-6495 66.8 mm (2.63 in)13⁄16 in 214-6496 69.9 mm (2.75 in)7⁄8 in 6V-0199 69.9 mm (2.75 in)

271-4600 Impact Socket Set, 12 Piece, 3⁄8 inch DriveWarranty: See individual part number

• 6 point• 3⁄8 inch drive• Standard length sockets• Includes socket bar and clips

ID: D01750T1

Size Part No. Length5⁄16 in 271-4601 22.2 mm (.87 in)3⁄8 in 271-4602 23.8 mm (.94 in)7⁄16 in 271-4603 23.8 mm (.94 in)1⁄2 in 271-4604 23.8 mm (.94 in)9⁄16 in 271-4605 23.8 mm (.94 in)5⁄8 in 271-4606 23.8 mm (.94 in)11⁄16 in 271-4607 26.2 mm (1.03 in)3⁄4 in 271-4608 26.2 mm (1.03 in)13⁄16 in 271-4609 30.2 mm (1.19 in)7⁄8 in 271-4610 32.5 mm (1.28 in)15⁄16 in 271-4611 33.3 mm (1.31 in)

1 in 271-4612 25.4 mm (1.00 in)


• 12 point• 3⁄8 inch drive• Deep length sockets• Includes socket bar and clips

Size Part No. Length3⁄8 in 271-4615 22.2 mm (.87 in)7⁄16 in 271-4616 23.8 mm (.94 in)1⁄2 in 271-4617 23.8 mm (.94 in)9⁄16 in 271-4618 23.8 mm (.94 in)5⁄8 in 271-4619 23.8 mm (.94 in)11⁄16 in 271-4620 26.2 mm (1.03 in)3⁄4 in 271-4621 26.2 mm (1.03 in)


Hand Tools (Inch) Socket SetsH

and Tools

ID: D01738T1



Size Part No. Length5⁄16 in 271-4670 54.0 mm (2.13 in)3⁄8 in 271-4671 54.0mm (2.13 in)7⁄16 in 271-4672 54.0mm (2.13 in)1⁄2 in 271-4673 54.0mm (2.13 in)9⁄16 in 271-4674 60.3mm (2.37 in)5⁄8 in 271-4675 60.3mm (2.37 in)11⁄16 in 271-4676 74.6mm (2.94 in)3⁄4 in 271-4677 69.9mm (2.75 in)13⁄16 in 271-4678 69.9mm (2.75 in)7⁄8 in 271-4679 69.9mm (2.75 in)15⁄16 in 271-4680 69.9mm (2.75 in)

1 in 271-4681 69.9mm (2.75 in)

01a.qxp 10/5/06 1:23 PM Page 11

Accessories Included



168-0383 Breaker Bar



2P-5520 Open-End Crowfoot Wrench Group, 9 piece, 3⁄8 inch DriveWarranty: See individual part number

• Can be used with 3⁄8 inch drive ratchet or torque wrenches

ID: 77271-1T1

Size Part No. Drive3⁄8 in 2P-5487 3⁄8 in7⁄16 in 2P-5488 3⁄8 in1⁄2 in 2P-5489 3⁄8 in9⁄16 in 2P-5491 3⁄8 in5⁄8 in 2P-5492 3⁄8 in11⁄16 in 2P-5493 3⁄8 in3⁄4 in 2P-5494 3⁄8 in13⁄16 in 2P-5495 3⁄8 in7⁄8 in 2P-5496 3⁄8 in

Optional Wrench (not included in 2P-5520)

1 3⁄16 in 4C-9306 3⁄8 in

5P-0336 Crowfoot Wrench Group, 11 PieceWarranty: See individual part number

• 12 point• May be used with 3⁄8 inch or 1⁄2 inch drive ratchet or torque wrenches

ID: C58235T1

Size Part No. Drive5⁄8 in 5P-0324 3⁄8 in11⁄16 in 5P-0325 3⁄8 in3⁄4 in 5P-0326 3⁄8 in13⁄16 in 5P-0327 3⁄8 in7⁄8 in 5P-0328 3⁄8 in15⁄16 in 5P-0329 3⁄8 in

1 in 5P-0331 3⁄8 in

11⁄16 in 5P-0332 3⁄8 in

11⁄8 in 5P-0333 1⁄2 in

11⁄4 in 5P-0334 1⁄2 in

13⁄8 in 5P-0335 1⁄2 in

Optional Wrenches (not included in 5P-0336)

15⁄16 in 1U-5536 1⁄2 in

111⁄16 in 5P-0294 1⁄2 in


• 12 point• 1⁄2 inch square drive• Chrome finish

ID: C79417T1


• 6 point• 1⁄2 inch square drive• Standard length socketss• Chrome finish• Includes socket bar and clips ID: C33207T1


1 in 214-6512 39.7 mm (1.56 in)

11⁄16 in 214-6513 42.9 mm (1.69 in)

11⁄8 in 214-6514 44.5 mm (1.75 in)



and

Tool

s

Size Part No. Length1⁄2 in 1S-0259 38.1 mm (1.50 in)9⁄16 in 8H-8549 38.1 mm (1.50 in)5⁄8 in 8H-8550 38.1 mm (1.50 in)11⁄16 in 8H-8551 38.1 mm (1.50 in)3⁄4 in 8H-8552 38.1 mm (1.50 in)13⁄16 in 8H-8553 38.1 mm (1.50 in)7⁄8 in 8H-8554 38.1 mm (1.50 in)15⁄16 in 8H-8555 38.1 mm (1.50 in)

1 in 8H-8556 38.1 mm (1.50 in)

11⁄16 in 9S-1729 41.3 mm (1.63 in)

11⁄8 in 9S-1730 44.5 mm (1.75 in)

11⁄4 in 9S-1731 47.6 mm (1.88 in)

01a.qxp 10/5/06 1:23 PM Page 12

ID: D00455T1

2P-5490 Deep Well Socket Set, 9 Piece, 1⁄2 inch DriveWarranty: See individual part number

• 6 point• 1⁄2 inch square drive• Chrome finish• Includes socket bar and clips

ID: C07892T1

Size Part No. Length1⁄2 in 2P-5475 82.6 mm (3.25 in)9⁄16 in 2P-5476 82.6 mm (3.25 in)5⁄8 in 2P-5477 82.6 mm (3.25 in)11⁄16 in 2P-5478 82.6 mm (3.25 in)3⁄4 in 2P-5479 82.6 mm (3.25 in)13⁄16 in 2P-5481 82.6 mm (3.25 in)7⁄8 in 2P-5482 82.6 mm (3.25 in)15⁄16 in 2P-5483 82.6 mm (3.25 in)

1 in 2P-5484 82.6 mm (3.25 in)


• 6 point• 1⁄2 inch square drive• Standard length sockets• Black oxide finish• Includes socket bar and clips

ID: D00449T1

Size Part No. Length1⁄2 in 213-3087 38.1 mm (1.50 in)9⁄16 in 213-3088 38.1 mm (1.50 in)5⁄8 in 213-3089 38.1 mm (1.50 in)11⁄16 in 213-3091 38.1 mm (1.50 in)3⁄4 in 213-3094 38.1 mm (1.50 in)13⁄16 in 213-3099 38.1 mm (1.50 in)7⁄8 in 213-3102 38.1 mm (1.50 in)15⁄16 in 213-3104 44.5 mm (1.75 in)

1 in 213-3107 44.5 mm (1.75 in)

11⁄16 in 213-3109 50.8 mm (2.00 in)

11⁄8 in 213-3110 50.8 mm (2.00 in)



and Tools


1 in 213-3526 88.9 mm (3.50 in)

11⁄16 in 213-3528 88.9 mm (3.50 in)

11⁄8 in 213-3530 88.9 mm (3.50 in)


• 6 point• 1⁄2 inch square drive• Deep length sockets• Black oxide finish• Includes socket bar and clips


• 12 point• 1⁄2 inch square drive• Deep length sockets• Polished chrome finish• Includes socket bar and clips ID: C80487T1

Size Part No. Length1⁄2 in 214-1162 82.6 mm (3.25 in)9⁄16 in 214-1163 82.6 mm (3.25 in)5⁄8 in 214-1164 82.6 mm (3.25 in)11⁄16 in 214-1165 82.6 mm (3.25 in)3⁄4 in 214-1166 82.6 mm (3.25 in)13⁄16 in 214-1167 82.6 mm (3.25 in)7⁄8 in 214-1168 82.6 mm (3.25 in)15⁄16 in 214-1169 82.6 mm (3.25 in)

1 in 214-1170 82.6 mm (3.25 in)

11⁄16 in 214-1171 82.6 mm (3.25 in)

11⁄8 in 214-1172 82.6 mm (3.25 in)

9S-1747 Universal Socket Set, 7 Piece, 3⁄8 inch DriveWarranty: See individual part number

• 12 point• 3⁄8 inch universal drive• Polished chrome finish

ID: B46815T1

Size Part No. Length3⁄8 in 8S-2284 40.1 mm (1.58 in)7⁄16 in 8H-8562 40.1 mm (1.58 in)1⁄2 in 8H-8563 42.1 mm (1.66 in)9⁄16 in 8H-8564 42.8 mm (1.69 in)5⁄8 in 8H-8565 44.5 mm (1.75 in)11⁄16 in 9S-1727 49.6 mm (1.95 in)3⁄4 in 8H-8566 50.4 mm (1.98 in)

01a.qxp 10/5/06 1:23 PM Page 13



160-6389 Ratchet Head1

8H-8546 Breaker Bar Head

162-8716 Wrench Handle

8H-8548 Socket Extension 203.2 mm (8.00 in)1 160-6390 Repair Kit (4S-7327 Repair Kit is available for former 8H-8545 Ratchet Head.)

ID: D00708T1

261-8581 Universal Impact Socket Set, 7 Piece, 3⁄8 inch DriveWarranty: See individual part number

• 6 point• 3⁄8 inch square drive• Includes socket bar and clips


214-6518 Universal Impact Socket Set, 5 Piece, 1⁄2 inch Drive

• 6 point• 1⁄2 inch square drive• Black oxide finish• Includes socket bar and clips

ID: C33411T1

Size Part No. Length1⁄2 in 214-6521 73.8 mm (2.91 in)9⁄16 in 214-6522 73.8 mm (2.91 in)5⁄8 in 214-6523 73.8 mm (2.91 in)11⁄16 in 214-6524 77.8 mm (3.06 in)3⁄4 in 214-6526 77.8 mm (3.06 in)

246-8184 Universal Impact Socket Set, 14 Piece, 1⁄2 inch Drive

• 6 point• 1⁄2 inch square drive• Black oxide finish• Standard length impact sockets• Includes socket bar and clips

ID: D01125T1


Size Part No. Length15⁄16 in 246-8176 77.8 mm (3.06 in)

1 in 246-8177 77.8 mm (3.06 in)

11⁄16 in 246-8178 80.17 mm (3.16 in)

11⁄8 in 246-8179 84.93 mm (3.34 in)

1 3⁄16 in 246-8180 84.93 mm (3.34 in)

11⁄4 in 246-8181 86.52 mm (3.41 in)

15⁄16 in 246-8182 86.52 mm (3.41 in)


• 12 point• 3⁄4 inch drive• Chrome finish



and

Tool

s

ID: C07905T1

Size Part No. Length3⁄4 in 8H-8529 50.8 mm (2.00 in)7⁄8 in 8H-8530 50.8 mm (2.00 in)15⁄16 in 8H-8531 50.8 mm (2.00 in)

1 in 8H-8532 52.4 mm (2.06 in)

11⁄16 in 8H-8533 54.0 mm (2.13 in)

11⁄8 in 8H-8534 55.5 mm (2.19 in)

11⁄4 in 8H-8535 57.2 mm (2.25 in)

15⁄16 in 8H-8536 58.7 mm (2.31 in)

11⁄2 in 8H-8537 63.5 mm (2.50 in)

15⁄8 in 8H-8539 66.7 mm (2.63 in)

111⁄16 in 8H-8538 69.9 mm (2.75 in)

13⁄4 in 8H-8540 69.9 mm (2.75 in)

17⁄8 in 8H-8541 79.4 mm (3.13 in)

2 in 8H-8542 79.4 mm (3.13 in)

21⁄8 in 8H-8543 82.6 mm (3.25 in)

23⁄16 in 8H-8544 82.6 mm (3.25 in)

21⁄4 in 8H-8504 82.6 mm (3.25 in)

01a.qxp 10/5/06 1:23 PM Page 14

5S-6093 Heavy-Duty Socket Set, 17 Piece, 1 inch DriveWarranty: See individual part number

• 6 point• 1 inch square drive• Black oxide finish

ID: C07895T1


23⁄8 in 5S-6077 98.4 mm (3.88 in)

21⁄2 in 5S-6078 104.8 mm (4.13 in)

25⁄8 in 5S-6079 57.2 mm (2.25 in)

23⁄4 in 5S-6080 114.3 mm (4.50 in)

3 in 5S-6081 123.8 mm (4.88 in)

31⁄8 in 5S-6082 127.0 mm (5.00 in)

31⁄4 in 5S-6083 127.0 mm (5.00 in)

31⁄2 in 5S-6084 133.4 mm (5.25 in)

35⁄8 in 5S-6085 133.4 mm (5.25 in)

33⁄4 in 5S-6086 136.5 mm (5.38 in)

4 in 5S-6087 127.0 mm (5.00 in)



5S-6092 Tool Box2

5S-6088 Sledge Socket Wrench 2

161-3983 Ratchet Head1

5S-6089 Wrench Handle


5S-6090 Sliding T Wrench Head1 161-3985 Repair Kit (5S-6094 Repair Kit is available forformer 5S-6091 Ratchet Head.)

2 Warranty: Six Months

8S-1603 Socket Set, 15 Piece, 12 Point Shoulder BoltWarranty: See individual part number

ID: B14952T1

Size Drive Part No. Length1⁄4 in 3⁄8 in 8S-1589 31.8 mm (1.25 in)5⁄16 in 3⁄8 in 8S-1590 31.8 mm (1.25 in)3⁄8 in 3⁄8 in 8S-1591 38.1 mm (1.50 in)7⁄16 in 3⁄8 in 8S-1592 38.1 mm (1.50 in)1⁄2 in 1⁄2 in 8S-1593 44.5 mm (1.75 in)9⁄16 in 1⁄2 in 8S-1594 44.5 mm (1.75 in)5⁄8 in 1⁄2 in 8S-1595 44.5 mm (1.75 in)11⁄16 in 1⁄2 in 8S-1596 44.5 mm (1.75 in)3⁄4 in 3⁄4 in 8S-1597 82.6 mm (3.25 in)13⁄16 in 3⁄4 in 8S-1598 82.6 mm (3.25 in)7⁄8 in 3⁄4 in 8S-1599 82.6 mm (3.25 in)15⁄16 in 3⁄4 in 8S-1600 82.6 mm (3.25 in)

1 in 3⁄4 in 8S-1601 57.2 mm (2.25 in)



8S-1602 Tool Box

261-0444 Adapter, 1⁄2 in Female to 3⁄8 in Male

214-6142 Hex Driver Set, 10 PieceWarranty: See individual part number

• Seven 3⁄8 inch drive hex sockets and three 1⁄2 inch drive hex sockets• Includes socket bar and clips

ID: C33212T1

Hex Sq. DriveSize Size Part No. Overall Length1⁄8 in 3⁄8 in 2P-8263 52.39 (2.06 in)5⁄32 in 3⁄8 in 2P-8264 52.39 (2.06 in)3⁄16 in 3⁄8 in 2P-8265 52.39 (2.06 in)7⁄32 in 3⁄8 in 8T-3042 52.39 (2.06 in)1⁄4 in 3⁄8 in 2P-8266 52.39 (2.06 in)5⁄16 in 3⁄8 in 2P-8267 52.39 (2.06 in)3⁄8 in 3⁄8 in 2P-8268 53.18 (2.09 in)1⁄2 in 1⁄2 in 214-7320 53.18 (2.09 in)9⁄16 in 1⁄2 in 214-7327 53.18 (2.09 in)5⁄8 in 1⁄2 in 214-7328 53.18 (2.09 in)

Individual Hex Sockets and Replacement Hex Bits

Socket Replacement Hex Size Drive Assembly Hex Bit1⁄8 in 3⁄8 in 2P-8263 2P-82695⁄32 in 3⁄8 in 2P-8264 2P-82713⁄16 in 3⁄8 in 2P-8265 2P-82727⁄32 in 3⁄8 in 8T-3042 8T-30431⁄4 in 3⁄8 in 2P-8266 2P-72741⁄4 in — — 2P-8273 1

5⁄16 in 3⁄8 in 2P-8267 2P-72743⁄8 in 3⁄8 in 2P-8268 2P-82759⁄16 in 3⁄8 in 5P-7253 5P-72521⁄2 in 1⁄2 in 214-7320 214-73219⁄16 in 1⁄2 in 214-7327 1P-35665⁄8 in 1⁄2 in 214-7328 214-7331

1 Standard hex bit without socket



and Tools

01a.qxp 10/5/06 1:23 PM Page 15

ID: C80070T1

227-4383 Inverted TORX® Socket Set, 10 Piece Warranty: See individual part number

• TORX® sockets for fuel system maintenance and repair• Ten piece set, 1⁄4 inch and 3⁄8 inch square drive• Socket teeth provide maximum engagement

and increased gripping ability• Each socket can be ordered separately• Sockets should not be used with power drivers

(air wrenches, etc.)• Chrome plating prevents corrosion and cleans easily• Includes socket rail and clips to keep sockets neatly

organized

ID: D00533T1

Torx Sq. Drive Overall Size Size Part No. Length

E4 1⁄4 inch 227-4384 22 mm (.88 in)

E5 1⁄4 inch 227-4385 22 mm (.88 in)

E6 1⁄4 inch 227-4386 22 mm (.88 in)

E7 1⁄4 inch 227-4387 22 mm (.88 in)

E8 1⁄4 inch 227-4388 22 mm (.88 in)

E10 3⁄8 inch 227-4389 30 mm (1.12 in)

E12 3⁄8 inch 227-4390 30 mm (1.12 in)

E14 3⁄8 inch 227-4391 30 mm (1.12 in)

E16 3⁄8 inch 227-4392 32 mm (1.25 in)

E18 3⁄8 inch 227-4393 33 mm (1.31 in)

ID: D01131T1

Hex Size Sq. Drive Size Part No. Overall Length1⁄8 in 1⁄4 in 243-5178 47.63 mm (17⁄8 in)9⁄64 in 1⁄4 in 243-5179 47.63 mm (17⁄8 in)5⁄32 in 1⁄4 in 243-5180 47.63 mm (17⁄8 in)3⁄16 in 1⁄4 in 243-5181 49.21 mm (115⁄16 in)7⁄32 in 3⁄8 in 243-5175 52.39 mm (21⁄16 in)1⁄4 in 3⁄8 in 243-5177 52.39 mm (21⁄16 in)5⁄16 in 3⁄8 in 243-5173 53.18 mm (2 3⁄32 in)3⁄8 in 3⁄8 in 243-5174 53.18 mm (2 3⁄32 in)

Drivers for TORX® ScrewsWarranty: Lifetime Part No. Description Size Use

6V-2123 Socket Assembly 3⁄8 in square drive Removal of TORX T-55 screws which retain brakecylinders to support plates on “V” Series Lift Trucks

5P-3038 Socket Assembly 3⁄8 in square drive Removal of shaft seal and bearing retainer fastenersTORX T-30 on 16G Motor Grader circle drive motor

5P-8689 Socket Assembly 3⁄8 in square drive Assembly and disassembly of TORX T-50 fastenerson cab door strikers

194-3584 TORX® Driver Set, 10 PieceWarranty: See individual part number

• Ten pieces, 1⁄4 inch and 3⁄8 inch square drive• TORXALIGN® design grips TORX® fasteners for easier fastener starting

(TORX® and TORXALIGN® are registered trademarks of Camcar, Inc.)• Includes socket bar and clips

ID: C33412T1

TORXALIGN® Bits


T10 1⁄4 in 194-3531 39.6 mm (1.56 in)

T15 1⁄4 in 194-3532 39.6 mm (1.56 in)

T20 1⁄4 in 194-3533 39.6 mm (1.56 in)

T25 1⁄4 in 194-3534 39.6 mm (1.56 in)

T30 3⁄8 in 194-3535 44.5 mm (1.75 in)

T40 3⁄8 in 194-3536 44.5 mm (1.75 in)

T45 3⁄8 in 194-3537 52.3 mm (2.06 in)

T50 3⁄8 in 194-3538 52.3 mm (2.06 in)

T55 3⁄8 in 194-3539 51.6 mm (2.03 in)

One Piece, 1⁄4 inch Square Drive Torx® Socket included

E8 1⁄4 in 194-3540 22.2 mm (.88 in)

Individual TORX® SocketAssemblyWarranty: Lifetime


T27 3⁄8 in 199-9199 44.5 mm (1.75 in)



and

Tool

s

246-8499 Hex Ball Driver Socket Set, 8 PieceWarranty: See individual part number

• Four 1⁄4 inch drive hex ball sockets and four 3⁄8 inch drive hex ball sockets• Material: steel• Includes socket bar and clips

01a.qxp 10/5/06 1:23 PM Page 16

Individual Sockets, 1⁄4 through 11⁄2 inch DriveWarranty: Lifetime

• All sockets are chrome finish unless otherwise stated

ID: C33413T1

Individual Sockets, 1⁄4 inch Drive1⁄4 inch Drive, Standard Length Sockets, 12 Point

Size Part No. Length3⁄16 in 9S-1711 22.2 mm (.88 in)7⁄32 in 9S-1712 22.2 mm (.88 in)1⁄4 in 9S-1713 22.2 mm (.88 in)9⁄32 in 9S-1714 22.2 mm (.88 in)5⁄16 in 9S-1715 22.2 mm (.88 in)5⁄16 in2 5P-0127 31.8 mm (1.25 in)11⁄32 in 9S-1716 22.2 mm (.88 in)3⁄8 in 9S-1717 22.2 mm (.88 in)7⁄16 in 9S-1718 22.2 mm (.88 in)1⁄2 in 9S-1719 22.2 mm (.88 in)3⁄8 in1 9S-2573 50.8 mm (2.00 in)

1 Deep length socket2 Deep length socket, 6 point

1⁄4 inch Drive, Universal Sockets, 12 Point

Size Part No. Length5⁄16 in 5P-4200 31.8 mm (1.25 in)

1⁄4 inch Drive, Deep Length Sockets, 6 Point, Chrome

Size Part No. Length3⁄16 in 213-9967 50.8 mm (2.00 in)7⁄32 in 213-9968 50.8 mm (2.00 in)1⁄4 in 213-9969 50.8 mm (2.00 in)9⁄32 in 213-9970 50.8 mm (2.00 in)5⁄16 in 213-9971 50.8 mm (2.00 in)11⁄32 in 213-9972 50.8 mm (2.00 in)3⁄8 in 213-9974 50.8 mm (2.00 in)7⁄16 in 213-9978 50.8 mm (2.00 in)1⁄2 in 213-9980 50.8 mm (2.00 in)9⁄16 in 213-9981 50.8 mm (2.00 in)

Individual Sockets, 3⁄8 inch Drive3⁄8 inch Drive, Universal Sockets, 12 Point

Size Part No. Length3⁄8 in 8S-2284 40.1 mm (1.58 in)7⁄16 in 8H-8562 40.1 mm (1.58 in)1⁄2 in 8H-8563 42.1 mm (1.66 in)9⁄16 in 8H-8564 42.8 mm (1.69 in)5⁄8 in 8H-8565 44.5 mm (1.75 in)11⁄16 in 9S-1727 49.6 mm (1.95 in)3⁄4 in 8H-8566 50.4 mm (1.98 in)

3⁄8 inch Drive, Standard Length Sockets, 12 Point

Size Part No. Length3⁄8 in 8S-2274 23.0 mm (.91 in)7⁄16 in 8H-8567 23.0 mm (.91 in)1⁄2 in 8H-8568 23.8 mm (.94 in)9⁄16 in 8H-8569 24.6 mm (.97 in)5⁄8 in 8H-8570 26.2 mm (1.03 in)11⁄16 in 9S-1728 27.0 mm (1.06 in)3⁄4 in 8H-8571 27.8 mm (1.09 in)1⁄4 in1 8S-1589 31.8 mm (1.25 in)5⁄16 in1 8S-1590 31.8 mm (1.25 in)3⁄8 in1 8S-1591 38.1 mm (1.50 in)7⁄16 in1 8S-1592 38.1 mm (1.50 in)

1 Shoulder bolt socket 12 point


Size Part No. Length3⁄8 in 214-6491 54.1 mm (2.13 in)7⁄16 in 214-6492 54.1 mm (2.13 in)1⁄2 in 214-6493 60.5 mm (2.38 in)9⁄16 in 8S-2357 60.5 mm (2.38 in)5⁄8 in 9S-5031 1 60.5 mm (2.38 in)11⁄16 in 214-6494 66.8 mm (2.63 in)3⁄4 in 214-6495 66.8 mm (2.63 in)13⁄16 in 214-6496 69.9 mm (2.75 in)7⁄8 in 6V-0199 69.9 mm (2.75 in)

1 Comes with insert for removing spark plugs

3⁄8 inch Drive, Standard Length Sockets, 6 Point,Chrome

Size Part No. Length3⁄8 in 214-1144 23.1 mm (0.91 in)7⁄16 in 214-1145 23.1 mm (0.91 in)1⁄2 in 214-1146 23.9 mm (0.94 in)9⁄16 in 214-1147 26.2 mm (1.03 in)5⁄8 in 214-1148 27.7 mm (1.09 in)11⁄16 in 214-1149 28.7 mm (1.13 in)3⁄4 214-1150 30.2 mm (1.19 in)



3⁄8 inch Drive, Standard Length Impact Sockets, 6 Point

Size Part No. Length5⁄16 in 271-4601 22.2 mm (.87 in)3⁄8 in 271-4602 23.8 mm (.94 in)7⁄16 in 271-4603 23.8 mm (.94 in)1⁄2 in 271-4604 23.8 mm (.94 in)9⁄16 in 271-4605 23.8 mm (.94 in)5⁄8 in 271-4606 23.8 mm (.94 in)11⁄16 in 271-4607 26.2 mm (1.03 in)3⁄4 in 271-4608 26.2 mm (1.03 in)13⁄16 in 271-4609 30.2 mm (1.19 in)7⁄8 in 271-4610 32.5 mm (1.28 in)15⁄16 in 271-4611 33.3 mm (1.31 in)

1 in 271-4612 25.4 mm (1.00 in)

3⁄8 inch Drive, Deep Length Impact Sockets, 12 Point

Size Part No. Length3⁄8 in 271-4615 22.2 mm (.87 in)7⁄16 in 271-4616 23.8 mm (.94 in)1⁄2 in 271-4617 23.8 mm (.94 in)9⁄16 in 271-4618 23.8 mm (.94 in)5⁄8 in 271-4619 23.8 mm (.94 in)11⁄16 in 271-4620 26.2 mm (1.03 in)3⁄4 in 271-4621 26.2 mm (1.03 in)


Size Part No. Length5⁄16 in 271-4670 54.0 mm (2.13 in)3⁄8 in 271-4671 54.0mm (2.13 in)7⁄16 in 271-4672 54.0mm (2.13 in)1⁄2 in 271-4673 54.0mm (2.13 in)9⁄16 in 271-4674 60.3mm (2.37 in)5⁄8 in 271-4675 60.3mm (2.37 in)11⁄16 in 271-4676 74.6mm (2.94 in)3⁄4 in 271-4677 69.9mm (2.75 in)13⁄16 in 271-4678 69.9mm (2.75 in)7⁄8 in 271-4679 69.9mm (2.75 in)15⁄16 in 271-4680 69.9mm (2.75 in)

1 in 271-4681 69.9mm (2.75 in)


Hand Tools (Inch) Individual SocketsH

and Tools

01a.qxp 10/5/06 1:23 PM Page 17


Size Part No. Length7⁄16 in 214-6497 38.1 mm (1.50 in)1⁄2 in 1S-0259 38.1 mm (1.50 in)9⁄16 in 8H-8549 38.1 mm (1.50 in)5⁄8 in 8H-8550 38.1 mm (1.50 in)11⁄16 in 8H-8551 38.1 mm (1.50 in)3⁄4 8H-8552 38.1 mm (1.50 in)13⁄16 in 8H-8553 38.1 mm (1.50 in)7⁄8 in 8H-8554 38.1 mm (1.50 in)15⁄16 in 8H-8555 38.1 mm (1.50 in)1 in 8H-8556 38.1 mm (1.50 in)11⁄16 in 9S-1729 41.3 mm (1.63 in)11⁄8 in 9S-1730 44.5 mm (1.75 in)11⁄4 in 9S-1731 47.6 mm (1.88 in)1⁄2 in1 8S-1593 44.5 mm (1.75 in)9⁄16 in1 8S-1594 44.5 mm (1.75 in)5⁄8 in1 8S-1595 44.5 mm (1.75 in)11⁄16 in1 8S-1596 44.5 mm (1.75 in)

1 Shoulder bolt socket 12 point

1⁄2 inch Drive, Standard Length Sockets, 6 Point, Chrome

Size Part No. Length7⁄16 in 214-6500 38.1 mm (1.50 in)1⁄2 in 214-6501 38.1 mm (1.50 in)9⁄16 in 214-6503 38.1 mm (1.50 in)5⁄8 in 214-6504 38.1 mm (1.50 in)11⁄16 in 214-6506 38.1 mm (1.50 in)3⁄4 in 214-6507 38.1 mm (1.50 in)13⁄16 in 214-6509 38.1 mm (1.50 in)7⁄8 in 214-6510 38.1 mm (1.50 in)15⁄16 in 214-6511 38.9 mm (1.53 in)1 in 214-6512 39.7 mm (1.56 in)11⁄16 in 214-6513 42.9 mm (1.69 in)11⁄8 in 214-6514 44.5 mm (1.75 in)

1⁄2 inch Drive, Deep Length Sockets, 12 Point

Size Part No. Length1⁄2 in 214-1162 82.6 mm (3.25 in)9⁄16 in 214-1163 82.6 mm (3.25 in)5⁄8 in 214-1164 82.6 mm (3.25 in)7⁄16 in 3P-2210 1 54 mm (2.13 in)11⁄16 in 214-1165 82.6 mm (3.25 in)3⁄4 in 214-1166 82.6 mm (3.25 in)13⁄16 in 214-1167 82.6 mm (3.25 in)7⁄8 in 214-1168 82.6 mm (3.25 in)15⁄16 in 214-1169 82.6 mm (3.25 in)1 in 214-1170 82.6 mm (3.25 in)111⁄16 in 214-1171 82.6 mm (3.25 in)11⁄8 in 214-1172 82.6 mm (3.25 in)

1 Special socket


Size Part No. Length1⁄2 in 2P-5475 82.6 mm (3.25 in)9⁄16 in 2P-5476 82.6 mm (3.25 in)5⁄8 in 2P-5477 82.6 mm (3.25 in)11⁄16 in 2P-5478 82.6 mm (3.25 in)3⁄4 in 2P-5479 82.6 mm (3.25 in)13⁄16 in 2P-5481 82.6 mm (3.25 in)7⁄8 in 2P-5482 82.6 mm (3.25 in)15⁄16 in 2P-5483 82.6 mm (3.25 in)1 in 2P-5484 82.6 mm (3.25 in)11⁄8 in 5P-7260 82.6 mm (3.25 in)

1⁄2 inch Drive, Standard Length Impact Sockets, 6 Point, Black

Size Part No. Length1⁄2 in 213-3087 38.1 mm (1.50 in)9⁄16 in 213-3088 38.1 mm (1.50 in)5⁄8 in 213-3089 38.1 mm (1.50 in)11⁄16 in 213-3091 38.1 mm (1.50 in)3⁄4 in 213-3094 38.1 mm (1.50 in)13⁄16 in 213-3099 38.1 mm (1.50 in)7⁄8 in 213-3102 38.1 mm (1.50 in)15⁄16 in 213-3104 44.5 mm (1.75 in)1 in 213-3107 44.5 mm (1.75 in)11⁄16 213-3109 50.8 mm (2.00 in)11⁄8 in 213-3110 50.8 mm (2.00 in)

1⁄2 inch Drive, Universal Impact Sockets, 6 Point,Black

Size Part No. Length1⁄2 in 214-6521 73.8 mm (2.91 in)9⁄16 in 214-6522 73.8 mm (2.91 in)5⁄8 in 214-6523 73.8 mm (2.91 in)11⁄16 in 214-6524 77.8 mm (3.06 in)3⁄4 in 214-6526 77.8 mm (3.06 in)

1⁄2 inch Drive, Deep Length Impact Sockets, 6 Point, Black

Size Part No. Length7⁄16 in 213-3516 82.6 mm (3.25 in)1⁄2 in 213-3517 82.6 mm (3.25 in)9⁄16 in 213-3518 82.6 mm (3.25 in)5⁄8 in 213-3520 82.6 mm (3.25 in)11⁄16 in 213-3521 82.6 mm (3.25 in)3⁄4 in 213-3522 82.6 mm (3.25 in)13⁄16 in 213-3523 82.6 mm (3.25 in)7⁄8 in 213-3524 88.9 mm (3.50 in)15⁄16 in 213-3525 88.9 mm (3.50 in)1 in 213-3526 88.9 mm (3.50 in)11⁄16 in 213-3528 88.9 mm (3.50 in)11⁄8 in 213-3530 88.9 mm (3.50 in)11⁄4 in 1U-8701 88.9 mm (3.50 in)


Size Part No. Length3⁄4 in 8H-8529 50.8 mm (2.00 in)7⁄8 in 8H-8530 50.8 mm (2.00 in)15⁄16 in 8H-8531 50.8 mm (2.00 in)1 in 8H-8532 52.4 mm (2.06 in)11⁄16 in 8H-8533 54.0 mm (2.13 in)11⁄8 in 8H-8534 55.5 mm (2.19 in)11⁄4 in 8H-8535 57.2 mm (2.25 in)15⁄16 in 8H-8536 58.7 mm (2.31 in)11⁄2 in 8H-8537 63.5 mm (2.50 in)15⁄8 in 8H-8539 66.7 mm (2.63 in)111⁄16 in 8H-8538 69.9 mm (2.75 in)13⁄4 in 8H-8540 69.9 mm (2.75 in)17⁄8 in 8H-8541 79.4 mm (3.13 in)2 in 8H-8542 79.4 mm (3.13 in)21⁄8 in 8H-8543 82.6 mm (3.25 in)23⁄16 in 8H-8544 82.6 mm (3.25 in)21⁄4 in 8H-8504 82.6 mm (3.25 in)5⁄8 in1 2P-8276 82.6 mm (3.25 in)3⁄4 in1 8S-1597 82.6 mm (3.25 in)13⁄16 in1 8S-1598 82.6 mm (3.25 in)7⁄8 in1 8S-1599 82.6 mm (3.25 in)15⁄16 in1 8S-1600 82.6 mm (3.25 in)1 in1 8S-1601 57.2 mm (2.25 in)21⁄2 in2 3P-2230 152.4 mm (6.00 in)

1 Shoulder bolt socket 12 point2 Special socket for fast fill fuel adapter


Size Part No. Length3⁄4 in 214-6553 44.5 mm (1.75 in)13⁄16 in 214-6554 47.8 mm (1.88 in)7⁄8 in 214-6556 47.8 mm (1.88 in)15⁄16 in 214-6557 47.8 mm (1.88 in)1 in 214-6558 50.8 mm (2.00 in)111⁄16 in 214-6559 50.8 mm (2.00 in)11⁄8 in 214-6560 54.1 mm (2.13 in)13⁄16 in 214-6561 54.1 mm (2.13 in)11⁄4 in 214-6562 54.1 mm (2.13 in)15⁄16 in 214-6564 57.2 mm (2.25 in)13⁄8 in 214-6565 57.2 mm (2.25 in)17⁄16 214-6566 57.2 mm (2.25 in)11⁄2 in 8T-5182 57.2 mm (2.25 in)19⁄16 in 214-6567 60.5 mm (2.38 in)15⁄8 in 214-6568 60.5 mm (2.38 in)111⁄16 in 214-6607 65.0 mm (2.56 in)13⁄4 in 214-6569 65.0 mm (2.56 in)113⁄16 in 214-6570 66.8 mm (2.63 in)17⁄8 in 214-6571 69.9 mm (2.75 in)2 in 214-6572 73.2 mm (2.88 in)


Individual Sockets Hand Tools (Inch)H

and

Tool

s

01a.qxp 10/5/06 1:23 PM Page 18

3⁄4 inch Drive, Deep Length Impact Sockets, 6 Point, Black


1 in 214-6599 76.2 mm (3.00 in)11⁄16 in 214-6600 76.2 mm (3.00 in)11⁄8 in 227-4397 1 88.9 mm (3.50 in)11⁄8 in 214-6601 76.2 mm (3.00 in)13⁄16 in 5P-3053 2 101.6 mm (4.00 in)13⁄16 in 214-6602 82.6 mm (3.25 in)11⁄4 in 214-6603 82.6 mm (3.25 in)15⁄16 in 214-6604 82.6 mm (3.25 in)13⁄8 in 214-6605 82.6 mm (3.25 in)17⁄16 in 214-6606 88.9 mm (3.50 in)

3⁄4 inch Drive, Deep Length Impact Sockets, 6 Point, Black (cont’d)


11⁄2 in 1U-5715 88.9 mm (3.50 in)11⁄2 in 5P-3054 127 mm (6.00 in)19⁄16 in 214-6608 88.9 mm (3.50 in)15⁄8 in 214-6609 88.9 mm (3.50 in)111⁄16 in 6V-7874 88.9 mm (3.50 in)13⁄4 in 214-6611 88.9 mm (3.50 in)113⁄16 in 214-6612 95.3 mm (3.75 in)17⁄8 in 214-6613 95.3 mm (3.75 in)2 in 214-6614 95.3 mm (3.75 in)

1 Special use for 3406 Engine head service2 Budd wheel socket

3⁄4 inch Drive, Tapered Impact Sockets, 12 Point, Black

Size Part No. Length3⁄4 in 124-0662 127 mm (5 in)


Hand Tools (Inch) Individual SocketsH

and Tools

Individual Sockets, 1 inch Drive1 inch Drive, Standard Length Sockets, 12 Point


11⁄2 in 6V-0024 69.9 mm (2.75 in)

1 inch Drive, Standard Length Sockets, 6 Point, Black

Size Part No. Length27⁄32 in 6V-4175 88.9 mm (3.50 in)7⁄8 in4 9S-6375 88.9 mm (3.50 in)7⁄8 in1 5P-1745 88.9 mm (3.50 in)29⁄32 in3 6V-2002 57.2 mm (2.25 in)15⁄16 in4 9S-6374 63.5 mm (2.50 in)15⁄16 in3 9S-6370 76.2 mm (3.00 in)13⁄32 in3 5P-3579 57.2 mm (2.25 in)11⁄8 in3 9S-6373 57.2 mm (2.25 in)11⁄8 in4 9S-6369 66.8 mm (2.63 in)19⁄32 in3 5P-3580 63.5 mm (2.50 in)15⁄16 in3 9S-6372 63.5 mm (2.50 in)115⁄32 in3 5P-3581 63.5 mm (2.50 in)17⁄16 in 4C-6723 63.5 mm (2.5 in)11⁄2 in3 9S-6371 63.5 mm (2.50 in)111⁄16 in 2P-2334 76.2 mm (3.00 in)13⁄4 in 2P-2335 76.2 mm (3.00 in)17⁄8 in 2P-2336 82.6 mm (3.25 in)23⁄16 in 2P-2338 91.9 mm (3.62 in)21⁄4 in2 5P-1748 87.1 mm (3.43 in)23⁄8 in1 5S-6077 98.4 mm (3.88 in)21⁄2 in1 5S-6078 104.8 mm (4.13 in)25⁄8 in1 5S-6079 57.2 mm (2.25 in)23⁄4 in1 5S-6080 114.3 mm (4.50 in)27⁄8 in 2P-8262 98.6 mm (3.88 in)3 in1 5S-6081 123.8 mm (4.88 in)31⁄8 in1 5S-6082 127.0 mm (5.00 in)31⁄4 in1 5S-6083 127.0 mm (5.00 in)31⁄2 in1 5S-6084 133.4 mm (5.25 in)35⁄8 in1 5S-6085 133.4 mm (5.25 in)33⁄4 in1 5S-6086 136.5 mm (5.38 in)4 in1 5S-6087 127.0 mm (5.00 in)41⁄4 in 5P-1662 90.4 mm (3.56 in)

1 Chrome finish2 Impact socket, 6 point, Warranty: Six Months3 Track bolt socket, 6 point, Warranty: Six Months4 Thin wall track bolt socket, 6 point, Warranty: Six Months

1 inch Square Drive Standard Length Impact Sockets, 12 Point, Industrial Finish


11⁄2 in 168-7955 66.5 mm (2.62 in)

1 inch Square Drive Standard Length Impact Sockets, 12 Point, Black Finish


11⁄2 in 4C-6994 57.2 mm (2.25 in)

1 inch Square Drive Standard Length Impact Sockets, 6 Point, Industrial Finish

Size Part No. Length3⁄4 in 9U-6548 54.0 mm (2.13 in)13⁄16 in 9U-6549 54.0 mm (2.13 in)7⁄8 in 9U-6550 54.0 mm (2.13 in)15⁄16 in 9U-6551 54.0 mm (2.13 in)1 in 9U-6552 57.2 mm (2.25 in)11⁄16 in 9U-6553 57.2 mm (2.25 in)11⁄8 in 9U-6554 57.2 mm (2.25 in)13⁄16 in 9U-6555 57.2 mm (2.25 in)11⁄4 in 9U-6556 60.3 mm (2.38 in)15⁄16 in 9U-6557 63.5 mm (2.50 in)13⁄8 in 9U-6558 63.5 mm (2.50 in)17⁄16 in 9U-6559 63.5 mm (2.50 in)11⁄2 in 9U-6560 66.7 mm (2.63 in)11⁄2 in 258-5686 69.9 mm (2.75 in)19⁄16 in 9U-6561 1 66.7 mm (2.63 in)15⁄8 in 9U-6562 69.9 mm (2.75 in)111⁄16 in 9U-6563 73.0 mm (2.88 in)13⁄4 in 9U-6564 73.0 mm (2.88 in)113⁄16 in 9U-6565 74.6 mm (2.94 in)17⁄8 in 9U-6566 74.6 mm (2.94 in)115⁄16 in 9U-6567 74.6 mm (2.94 in)2 in 9U-6568 82.6 mm (3.25 in)21⁄16 in 9U-6569 82.6 mm (3.25 in)21⁄8 in 9U-6570 82.6 mm (3.25 in)23⁄16 in 9U-6571 84.9 mm (3.34 in)21⁄4 in 9U-6572 84.9 mm (3.34 in)25⁄16 in 9U-6573 88.9 mm (3.50 in)23⁄8 in 9U-6574 92.1 mm (3.63 in)27⁄16 in 9U-6575 92.1 mm (3.63 in)21⁄2 in 9U-6576 92.1 mm (3.63 in)29⁄16 in 9U-6577 95.3 mm (3.75 in)25⁄8 in 9U-6578 95.3 mm (3.75 in)211⁄16 in 9U-6579 98.4 mm (3.88 in)23⁄4 in 9U-6580 98.4 mm (3.88 in)213⁄16 in 9U-6581 101.6 mm (4.00 in)27⁄8 in 9U-6582 101.6 mm (4.00 in)215⁄16 in 9U-6583 122.2 mm (4.81 in)3 in 9U-6584 111.1 mm (4.38 in)

1 Used on 789 Off-Highway Truck cab supportassemblies bolts

Individual Sockets, 3⁄4 inch Drive (cont’d)

1 inch Square Drive Deep Length Impact Socket, 6 Point, Industrial Finish


13⁄16 in 4C-9787 111 mm (4.37 in)23⁄16 in 4C-9748 111 mm (4.37 in)

Individual Sockets, 11⁄2 inch Drive11⁄2 inch Drive, Track Sockets, Impact Sockets


11⁄2 in 9U-6734 1 78.0 mm (3.07 in)

15⁄8 in 1U-8798 114.3 mm (4.50 in)

111⁄16 in 1U-8586 114.3 mm (4.50 in)

113⁄16 in 261-8571 84.6 mm (3.33 in)

2 in 8T-9175 114.3 mm (4.50 in)

21⁄16 in 8T-9174 114.3 mm (4.50 in)

29⁄16 in 132-8743 102.4 mm (4.03 in)

23⁄4 in 136-5190 107.1 mm (4.22 in)

31⁄4 in 231-4550 2 118.3 mm (4.66 in)

41⁄4 in 234-6041 3 152.4 mm (6.00 in)1 Special for 994 Lift Cylinder2 Special for 797 Off-Highway Truck Ball Studs3 Special for 797B Off-Highway Truck Steering

Linkages

01a.qxp 10/5/06 1:23 PM Page 19

ID: D00994T1

5P-5249 Pin Socket

• Used with 3⁄8 inch drive speeder handle to remove and install buttons that hold ROPS Cab headliner in position for air conditioning repairs• Use 3F-4479 Spring Pins as replacements if spring pins (1) become worn or damaged

ID: A24406T1

233-1637 Ratchet Set, 3 PieceWarranty: Lifetime

• Sealed heads protect internal components from outside environment which leads to longer product life and reduced maintenance, and prevents gear slippage• Heads forged to exact tolerances for longer tool life and greater head strength• High strength internal mechanism provides longer tool life • Ergonomic handle reduces user fatigue and has a more comfortable grip• Reverse lever can be shifted with one hand which saves time when the gear mechanism needs to be reversed in tight places• Square drive is close to the end of the head, giving maximum accessibility to fasteners in restricted areas• Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish

ID: il2, D00707T1

Drive Smallest Size Part No. Length Working Arc Repair Kit1⁄4 239-6823 112.3 mm (4.42 in) 12 ° 230-08123⁄8 239-6824 187.0 mm (7.38 in) 12 ° 230-08131⁄2 239-6825 261.9 mm (10.31 in) 10 ° 214-7339

RatchetsWarranty: Lifetime

• Sealed heads protect internal components from outside environment which leads to longer product life and reduced maintenance, and prevents gear slippage

• Heads forged to exact tolerances for longer tool life and greater head strength• High strength internal mechanism provides longer tool life • Ergonomic handle reduces user fatigue and has a more comfortable grip• Reverse lever can be shifted with one hand which saves time when the gear mechanism needs to be reversed in tight places• Square drive is close to the end of the head, giving maximum accessibility to fasteners in restricted areas• Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish

Smallest Working Repair

Size Part No. Length Arc Kit1⁄4 in 239-6823 112.3 mm (4.42 in) 12° 230-08123⁄8 in 239-6824 187.0 mm (7.38 in) 12° 230-08133⁄8 in 194-4944 3 260.4 mm (10.25 in) 5° —1⁄2 in 239-6825 261.9 mm (10.31 in) 10° 214-73391⁄2 in 214-7340 1 287.3 mm (11.31 in) 4.5° 214-73411⁄2 in 239-6826 381.0 mm (15.00 in) 10° 214-73391⁄2 in 263-3341 2 448.6 mm (17.66 in) 10° 214-7339

1 Round head2 Long flex handle2 Offset round swivel head

Repair Kits for Discontinued Ratchets

Part No. Repair Kit

5P-7443 5P-7444 (20 tooth gear)5P-7445 (30 tooth gear)

8H-8572 4S-7325

8H-8557 4S-7326

9U-6635 9U-6636 (30 tooth gear)

9U-6637 9U-6638 (30 tooth gear)

9U-6639 9U-6640 (30 tooth gear)

214-7333 214-7339

Breaker BarsWarranty: Lifetime

ID: C79473T1

DriveSize Part No. Length Repair Kit1

1/4 in 214-7316 152.4 mm (6.00 in) —3⁄8 in 214-7326 242.9 mm (9.56 in) 6V-01121⁄2 in 168-0383 457.2 mm (18.00 in) 293-0712

1 Includes head, pin, washer


Individual Sockets / Ratchets Hand Tools (Inch)H

and

Tool

s

01a.qxp 10/5/06 1:23 PM Page 20

8T-2854 Nozzle Retainer Handle

• Can be used as handle (10 inch long) for any 3⁄8 inch drive socket• When used with 5P-0328 Crowfoot Wrench, provides means to hold fuel

nozzle in place while installing fuel lines

ID: B96379T1

Ratchet HeadsWarranty: Lifetime

ID: C80285T1

SmallestHead Head Head Working Repair

Size Part No Width Length Depth Arc Kit3⁄4 in 160-6389 63.0 mm 150.9 mm 31.2 mm 11.25° 160-6390

(2.48 in) (5.94 in) (1.23 in)

1 in 161-3983 79.4 mm 200.0 mm 38.1 mm 12° 161-3985(3.12 in) (7.86 in) (1.51 in)

NOTE: A 4S-7327 Ratchet Repair Kit is available for discontinued 8H-8545Ratchet Head; a 5S-6094 Ratchet Repair Kit is available for discontinued5S-6091 Ratchet Head.

HandlesWarranty: Lifetime

ID: C09453T1

DriveSize Part No. Length3⁄4 in 162-8716 489.0 mm (19.25 in)

1 in 5S-6089 736.6 mm (29.00 in)

8H-8546 Head Breaker Bar, 3⁄4 inch DriveWarranty: Lifetime

ID: C80293T1

Drive Part Size No. Length Width3⁄4 in 8H-8546 93.6 mm (3.67 in) 42.1 mm (1.66 in)


Hand Tools (Inch) Ratchets / MiscellaneousH

and Tools

Socket ExtensionsWarranty: Lifetime

ID: C80281T1

DriveSize Part No. Length1⁄4 in 9S-1720 50.8 mm (2.00 in)1⁄4 in 9S-1721 101.6 mm (4.00 in)3⁄8 in 8H-8574 76.2 mm (3.00 in)3⁄8 in 3P-2240 304.8 mm (12.00 in)3⁄8 in 8H-8575 152.4 mm (6.00 in)1⁄2 in 5P-8676 76.2 mm (3.00 in)1⁄2 in 9S-1732 127.0 mm (5.00 in)1⁄2 in 8H-8559 279.0 mm (11.00 in)1⁄2 in 271-4722 2 76.2 mm (3.00 in)

DriveSize Part No. Length1⁄2 in 271-4723 2 127.0 mm (5.00 in)1⁄2 in 271-4724 2 279.0 mm (11.00 in)3⁄4 in 8H-8548 203.2 mm (8.00 in)3⁄4 in 8T-9265 1 254.0 mm (10.00 in)3⁄4 in 8T-5183 1 406.4 mm (16.00 in)

1 in 5S-6076 203.2 mm (8.00 in)

1 in 158-8723 3 476 mm (18.74 in)

1 Requires locking pin2 Impact3 Double hole extension

01a.qxp 10/5/06 1:23 PM Page 21

Universal Joint Extension Socket

• 1⁄2 inch drive• 12 point

ID: C58293T1

Size Part No. Length5⁄8 in 6V-4058 182.6 mm (7.19 in)

Sliding T-HandleWarranty: Lifetime

ID: C80277T1

DriveSize Part No. Length1⁄4 in 214-7319 114.3 mm (4.50 in)1⁄2 in 213-1985 304.8 mm (12.00 in)

Sliding ”T“ Wrench HeadWarranty: Lifetime

ID: C54475T1

DriveSize Part No. Description Use

1 in 5S-6090 Head 5S-6089 Handle

8H-8573 Speeder Handle, 3⁄8 inch DriveWarranty: Lifetime

ID: C80278T1 DriveSize Part No. Length3⁄8 in 8H-8573 447.5 mm (17.62 in)

Socket Drive Adapters

ID: C07906T1

ReplacementPart No. Description Bit

213-4437 Adapter, 1⁄4 in Female to 3⁄8 in Male

261-0443 Adapter, 3⁄8 in Female to 1⁄4 in Male 261-0446

8H-8576 Adapter, 3⁄8 in Female to 1⁄2 in Male


8H-8561 Adapter, 1⁄2 in Female to 3⁄4 in Male


2P-8261 Adapter, 3⁄4 in Female to 1 in Male

5P-3588 Adapter, 1 in Female to 3⁄4 in Male

261-8569 Adapter, 1 in Female to 11⁄2 in Male

261-8570 Adapter, 11⁄2 in Female to 1 in Male

Impact Wrench Socket Adapters

• Heavy-duty adapter and extensions can be used with 11⁄2 inch drive impactwrenches

• Allows the use of 1 inch drive sockets instead of the higher priced 11⁄2 inchdrive sockets

ID: C07894T1

Item Part No. Description

1 9S-4028 Extension, 1 in drive both ends, 133.4 mm (5.25 in) long

2 9S-4026 Adapter, 11⁄2 in to 1 in drive

3 9S-4027 Extension, 1 in drive both ends, 60.3 mm (2.38 in) long

Not shown 207-8160 Extension, 1 in drive, 76.2 mm (3 in) long

Drive Size Part No.1⁄4 in 9S-17243⁄8 in 6V-00941⁄2 in 8H-8560


Miscellaneous Hand Tools (Inch)H

and

Tool

s

Universal JointWarranty: Lifetime

ID: A82269T1

01a.qxp 10/5/06 1:23 PM Page 22

ID: C07911T2

Universal DrivesWarranty: Lifetime

• Used with Caterpillar torque multipliers as well as other applications

5P-1749• Use with the 5S-6076 Extension, 5P-1748 Socket, and a suitable torque multiplier to loosen and

tighten the nuts which retain 8D and 9D Ripper mounting brackets

5P-3534• Use with a Torque Multiplier in applications such as tightening the nuts which secure the final

drive housings to the rear frame and case of Caterpillar articulated Motor Graders

ID: A07680T1

Torque AngularDrive Size Part No. Capacity Rotation

1 in 5P-1749 1,500 ft lb 30°3⁄4 in 5P-3534 1,000 ft lb 30°

1P-0853 Ratchet Adapter

• 3⁄4 inch female to 3⁄4 inch male• Used primarily with the 1P-0850 Torque Multiplier• Convenient for other applications such as with the 3⁄4

inch drive 9S-7351 Torque Wrench

ID: 76005T1

Capacity 450 lb

4C-9818 Hex Shank4C-9819 Universal JointWarranty: Manufacturer’s

ID: C79422T1 ID: C79436T1

Outside Part No. Diameter O.A.L. SIze

4C-9818 — 23⁄4 in 7⁄16 in hex x 11⁄4 in on one end with 1⁄2 in square drive (male) with lock button on other end

4C-9819 13⁄16 in 21⁄2 in 1⁄2 in square drive (female) with lock button hole

4C-9600 Combination Wrench Set, Standard Length, 11 PieceWarranty: See individual part number

• Polished chrome finish• 271-4700 Wrench Gripper Rack available


Hand Tools (Inch) Miscellaneous / Wrench SetsH

and Tools

Size Part No. Length3⁄8 in 4C-9592 165.1 mm (6.50 in)7⁄16 in 4C-9593 184.15 mm (7.25 in)1⁄2 in 4C-9594 204.0 mm (8.03 in)9⁄16 in 4C-9595 222.3 mm (8.75 in)5⁄8 in 4C-9596 241.3 mm (9.50 in)11⁄16 in 4C-9597 260.4 mm (10.25 in)3⁄4 in 4C-9598 280.2 mm (11.03 in)13⁄16 in 4C-9599 299.2 mm (11.78 in)7⁄8 in 4C-9601 318.3 mm (12.53 in)15⁄16 in 4C-9602 338.1 mm (13.31 in)

1 in 4C-9603 357.1 mm (14.06 in)

4C-9610 Short Length Combination Wrench Set, 9 PieceWarranty: See individual part number

• Polished chrome finish• Includes vinyl bag

ID: C07911T3

Size Part No. Length1⁄4 in 4C-9604 114.3 mm (4.50 in)5⁄16 in 4C-9605 124.0 mm (4.88 in)3⁄8 in 4C-9606 132.6 mm (5.22 in)7⁄16 in 4C-9607 138.2 mm (5.44 in)1⁄2 in 4C-9608 146.1 mm (5.75 in)9⁄16 in 1S-0254 165.1 mm (6.50 in)5⁄8 in 4C-9609 157.2 mm (6.19 in)11⁄16 in 4C-9611 167.4 mm (6.59 in)3⁄4 in 1S-0253 174.8 mm (6.89 in)

01a.qxp 10/5/06 1:23 PM Page 23

Combination WrenchesWarranty: Lifetime

• 15° angle on open end and 15° offset on box end• Box end is 12 point except 8H-8502 which is 6 point• All are polished chrome finish except 9U-5130

ID: C07949T2

LENGTH

Size Part No. Length1⁄4 in 4C-9604 114.3 mm (4.50 in)1⁄4 in 8H-8502 1 78.7 mm (3.10 in)5⁄16 in 4C-9605 124.0 mm (4.88 in)3⁄8 in 4C-9606 132.6 mm (5.22 in)3⁄8 in 4C-9592 165.1 mm (6.50 in)7⁄16 in 4C-9607 138.2 mm (5.44 in)7⁄16 in 4C-9593 184.2 mm (7.25 in)1⁄2 in 4C-9608 146.1 mm (5.75 in)1⁄2 in 4C-9594 204.0 mm (8.03 in)9⁄16 in 1S-0254 165.1 mm (6.50 in)9⁄16 in 4C-9595 222.3 mm (8.75 in)5⁄8 in 4C-9609 157.2 mm (6.19 in)5⁄8 in 4C-9596 241.3 mm (9.50 in)11⁄16 in 4C-9611 167.4 mm (6.59 in)11⁄16 in 4C-9597 260.4 mm (10.25 in)

Size Part No. Length3⁄4 in 1S-0253 174.8 mm (6.89 in)3⁄4 in 4C-9598 280.2 mm (11.03 in)13⁄16 in 4C-9599 299.2 mm (11.78 in)7⁄8 in 4C-9601 318.3 mm (12.53 in)15⁄16 in 4C-9602 338.1 mm (13.31 in)

1 in 4C-9603 357.1 mm (14.06 in)

11⁄16 in 8H-8516 382.8 mm (15.25 in)

11⁄8 in 8H-8517 404.6 mm (15.94 in)

11⁄4 in 8H-8518 433.1 mm (17.06 in)

15⁄16 in 8H-8519 458.5 mm (18.06 in)

13⁄8 in 8H-8520 482.6 mm (19.00 in)

11⁄2 in 8H-8424 534.5 mm (21.04 in)

15⁄8 in 8H-8423 562.4 mm (22.14 in)

46 mm (113⁄16 in) 9U-5130 2 596.1 mm (23.47 in)

1 Box end is 6 point2 Black oxide finish

248-8810 Fractional Ratcheting Wrench Set, 8 pieceWarranty: Lifetime

• Dual pawl ratcheting box end• 15 degrees offset box head• Box ends are reversible• Durable nickel chrome finish

ID: D01359T1

Size Part No. Length5⁄16 in 248-8811 135 mm (5 5⁄16 in)3⁄8 in 248-8812 160 mm (6 5⁄16 in)7⁄16 in 248-8813 170 mm (6 11⁄16 in)1⁄2 in 248-8814 180 mm (7 1⁄16 in)9⁄16 in 248-8815 190 mm (7 1⁄2 in)5⁄8 in 248-8816 210 mm (8 1⁄4 in)11⁄16 in 248-8817 230 mm (9 1⁄16 in)3⁄4 in 248-8818 250 mm (9 13⁄16 in)

Open End WrenchesWarranty: Lifetime

• Tappet wrench• For low torque applications

ID: C79498T1


Wrench Sets Hand Tools (Inch)H

and

Tool

s

Size Part No. Length1⁄2 in x 9⁄16 in 8H-8501 9.50 in

01a.qxp 10/5/06 1:23 PM Page 24

1P-3515 Open End Wrench Set, 30° and 60° Offset, 14 PieceWarranty: Lifetime

ID: C07902T1

Size Part No. Length3⁄8 in 1P-3501 122.9 mm (4.84 in)7⁄16 in 1P-3502 137.4 mm (5.41 in)1⁄2 in 1P-3503 151.6 mm (5.97 in)9⁄16 in 1P-3504 166.6 mm (6.56 in)5⁄8 in 1P-3505 180.8 mm (7.12 in)11⁄16 in 1P-3506 197.6 mm (7.78 in)3⁄4 in 1P-3507 210.3 mm (8.28 in)13⁄16 in 1P-3508 225.6 mm (8.88 in)7⁄8 in 1P-3509 239.8 mm (9.44 in)15⁄16 in 1P-3510 254.0 mm (10.00 in)

1 in 1P-3511 269.0 mm (10.59 in)

11⁄16 in 1P-3512 283.5 mm (11.16 in)

11⁄8 in 1P-3513 298.5 mm (11.75 in)

11⁄4 in 1P-3514 327.2 mm (12.88 in)

1P-3516 Tool Kit Bag (not serviced)

Optional Wrenches (not included in 1P-3515)

13⁄8 in 127-2277 356.6 mm (14.04 in)

11⁄2 in 127-2278 385.8 mm (15.19 in)

15⁄8 in 127-2279 415.0 mm (16.34 in)

17⁄8 in 127-2280 473.2 mm (18.63 in)

233-1635 Angle Wrench Set, 7 PieceWarranty: Lifetime

• Increased torque — wrench box end contacts the fasteneron the flats rather than on the corners, preventing roundingof the fastener and allowing for more torque to be applied

• Concentric or uniform wall thickness on the box endeliminates weak spots while allowing for a thin wall designfor greater accessibility

• Continuous arc open end design evenly distributes appliedstress over the entire radius of the open end, enhancing thewrench strength and life of the tool

• Long handles for better reach and greater applied torque• Highly polished nickel/chrome plating — tough nickel for

corrosion resistance and chrome plating for wear resistanceand a mirror-like finish

ID: il2, D00737T1

Drive Size Part No. Length3⁄8 in 1P-3501 122.9 mm (4.84 in)7⁄16 in 1P-3502 137.4 mm (5.41 in)1⁄2 in 1P-3503 151.6 mm (5.97 in)9⁄16 in 1P-3504 166.6 mm (6.56 in)5⁄8 in 1P-3505 180.8 mm (7.12 in)11⁄16 in 1P-3506 197.6 mm (7.78 in)3⁄4 in 1P-3507 210.3 mm (8.28 in)

233-1636 Angle Wrench Set, Large, 7 PieceWarranty: Lifetime

• Increased torque — wrench box end contacts the fastener on the flats ratherthan on the corners, preventing rounding of the fastener and allowing formore torque to be applied

• Concentric or uniform wall thickness on the box end eliminates weak spotswhile allowing for a thin wall design for greater accessibility

• Continuous arc open end design evenly distributes applied stress over theentire radius of the open end, enhancing the wrench strength and life of thetool

• Long handles for better reach and greater applied torque• Highly polished nickel/chrome plating — tough nickel for corrosion

resistance and chrome plating for wear resistance and a mirror-like finishID: il2, D00719T1


Hand Tools (Inch) Wrench SetsH

and Tools

Drive Size Part No. Length13⁄16 in 1P-3508 225.6 mm (8.88 in)7⁄8 in 1P-3509 239.8 mm (9.44 in)15⁄16 in 1P-3510 254.0 mm (10.00 in)

1 in 1P-3511 269.0 mm (10.59 in)

11⁄16 in 1P-3512 283.5 mm (11.16 in)

11⁄8 in 1P-3513 298.5 mm (11.75 in)

11⁄4 in 1P-3514 327.2 mm (12.88 in)

01a.qxp 10/5/06 1:23 PM Page 25

Hand Tools (Metric)


• 6 point• 1⁄4 inch drive• Standard length sockets• Polished chrome finish• Includes socket bar and clips

ID: C80419T1


4.0 mm 200-8415 22.2 mm (0.87 in)

5.0 mm 200-8417 22.2 mm (0.87 in)

5.5 mm 200-8418 22.2 mm (0.87 in)

6.0 mm 200-8419 22.2 mm (0.87 in)

7.0 mm 200-8420 22.2 mm (0.87 in)

8.0 mm 200-8421 22.2 mm (0.87 in)

9.0 mm 200-8422 22.2 mm (0.87 in)

10.0 mm 200-8423 22.2 mm (0.87 in)

11.0 mm 200-8424 22.2 mm (0.87 in)

12.0 mm 200-8426 22.2 mm (0.87 in)

13.0 mm 200-8427 22.2 mm (0.87 in)

14.0 mm 200-8428 22.2 mm (0.87 in)

15.0 mm 200-8429 23.0 mm (0.91 in)


• 6 point• 1⁄4 inch drive• Deep length sockets• Polished chrome finish• Includes socket bar and clips

ID: C33220T1


6.0 mm 194-3518 50.8 mm (2.00 in)

7.0 mm 194-3519 50.8 mm (2.00 in)

8.0 mm 194-3521 50.8 mm (2.00 in)

9.0 mm 194-3522 50.8 mm (2.00 in)

10.0 mm 194-3523 50.8 mm (2.00 in)

11.0 mm 194-3527 50.8 mm (2.00 in)

12.0 mm 194-3528 50.8 mm (2.00 in)

13.0 mm 194-3529 50.8 mm (2.00 in)

14.0 mm 194-3530 50.8 mm (2.00 in)


• 12 point• 3⁄8 inch drive• Standard length sockets• Polished chrome finish• Includes socket bar and clips

ID: D00467T1


8.0 mm 194-3480 23.0 mm (0.91 in)

9.0 mm 194-3483 23.0 mm (0.91 in)

10.0 mm 194-3488 23.0 mm (0.91 in)

11.0 mm 194-3490 23.0 mm (0.91 in)

12.0 mm 194-3492 23.8 mm (0.94 in)

13.0 mm 194-3494 24.6 mm (0.97 in)

14.0 mm 194-3495 26.2 mm (1.03 in)

15.0 mm 194-3496 27.0 mm (1.06 in)

16.0 mm 194-3497 27.8 mm (1.09 in)

17.0 mm 194-3498 28.6 mm (1.13 in)

18.0 mm 194-3499 28.6 mm (1.13 in)

19.0 mm 194-3500 30.2 mm (1.19 in)



ID: C80417T1


Socket Sets Hand Tools (Metric)H

and

Tool

s


8.0 mm 199-9023 54.0 mm (2.13 in)

9.0 mm 199-9025 54.0 mm (2.13 in)

10.0 mm 199-9026 54.0 mm (2.13 in)

11.0 mm 199-9027 54.0 mm (2.13 in)

12.0 mm 199-9028 54.0 mm (2.13 in)

13.0 mm 199-9029 54.0 mm (2.13 in)

14.0 mm 199-9030 60.3 mm (2.37 in)

15.0 mm 199-9031 60.3 mm (2.37 in)

16.0 mm 199-9032 60.3 mm (2.37 in)

17.0 mm 199-9033 66.7 mm (2.63 in)

18.0 mm 199-9034 66.7 mm (2.63 in)

19.0 mm 199-9035 66.7 mm (2.63 in)

01b.qxp 10/5/06 1:24 PM Page 26

ID: D01732T1





10.0 mm 214-6635 54.0 mm (2.13 in)

11.0 mm 214-6636 54.0 mm (2.13 in)

12.0 mm 214-6637 54.0 mm (2.13 in)

13.0 mm 214-6638 54.0 mm (2.13 in)

14.0 mm 214-6639 60.3 mm (2.37 in)

15.0 mm 214-6640 60.3 mm (2.37 in)

17.0 mm 214-6641 66.7 mm (2.63 in)

19.0 mm 214-6642 66.7 mm (2.63 in) ID: C33224T1



ID: D00971T1

241-0873 Twist Socket Set, 13 Piece, 3⁄8 inch DriveWarranty: Lifetime

• SAE / Metric impact sockets quickly and easily remove damaged or rounded nuts and bolts

• 6 fluted sockets grip onto fastener and tighten as more torque is applied (no hammering required to install socket over fastener)

• Applications include oil pan drain plugs, exhaust manifold nuts, studs, pipe nipples, and corroded marine fasteners

• Shallow depth• Fits sizes from 10 to 19 mm (3⁄8 to 3⁄4 inch) • 3⁄8 inch square drive• Standard length• Industrial black finish• Includes plastic tray, socket bar, and clips• Can be ordered by set or individual


8.0 mm 214-6621 23.0 mm (0.91 in)

9.0 mm 214-6623 23.0 mm (0.91 in)

10.0 mm 214-6624 23.0 mm (0.91 in)

11.0 mm 214-6625 23.0 mm (0.91 in)

12.0 mm 214-6626 23.8 mm (0.94 in)

13.0 mm 214-6627 24.6 mm (0.97 in)

14.0 mm 214-6628 26.2 mm (1.03 in)

15.0 mm 214-6629 27.0 mm (1.06 in)

16.0 mm 214-6630 27.8 mm (1.09 in)

17.0 mm 214-6631 28.6 mm (1.13 in)

18.0 mm 214-6632 28.6 mm (1.13 in)

19.0 mm 214-6633 30.2 mm (1.19 in)

ID: C33223T1


• 6 point• 3⁄8 inch drive• Standard length sockets• Chrome finish• Includes socket bar and clips


10 mm 241-0860 31.8 mm (11⁄4 in)

12 mm 241-0861 31.8 mm (11⁄4 in)

13 mm 241-0862 31.8 mm (11⁄4 in)

14 mm 241-0863 31.8 mm (11⁄4 in)

15 mm 241-0864 31.8 mm (11⁄4 in)

17 mm 241-0865 31.8 mm (11⁄4 in)3⁄8 in 241-0866 31.8 mm (11⁄4 in)

11 mm 241-0867 31.8 mm (11⁄4 in)1⁄2 in 241-0868 31.8 mm (11⁄4 in)9⁄16 in 241-0869 31.8 mm (11⁄4 in)

16 mm 241-0870 31.8 mm (11⁄4 in)11⁄16 in 241-0871 34.9 mm (13⁄8 in)

19 mm 241-0872 34.9 mm (13⁄8 in)

Hand Tools


8.0 mm 271-4623 23.0 mm (0.91 in)

9.0 mm 271-4624 23.0 mm (0.91 in)

10.0 mm 271-4625 23.0 mm (0.91 in)

11.0 mm 271-4626 23.8 mm (0.94 in)

12.0 mm 271-4627 23.8 mm (0.94 in)

13.0 mm 271-4628 24.6 mm (0.97 in)

14.0 mm 271-4630 27.0 mm (1.06 in)

15.0 mm 271-4631 27.0 mm (1.06 in)

16.0 mm 271-4632 27.8 mm (1.09 in)

17.0 mm 271-4633 28.2 mm (1.11 in)

18.0 mm 271-4634 29.0 mm (1.14 in)

19.0 mm 271-4635 30.6 mm (1.20 in)

21.0 mm 271-4636 29.5 mm (1.16 in)

24.0 mm 271-4637 33.0 mm (1.30 in)

Hand Tools (Metric) Socket Sets

01b.qxp 10/5/06 1:24 PM Page 27


10.0 mm 9U-6125 43.5 mm (1.71 in)

12.0 mm 9U-6126 45.5 mm (1.79 in)

13.0 mm 9U-6127 45.5 mm (1.79 in)

14.0 mm 9U-6128 47.9 mm (1.89 in)

15.0 mm 9U-6129 47.9 mm (1.89 in)

16.0 mm 9U-6130 47.9 mm (1.89 in)

17.0 mm 9U-6131 50.7 mm (2.00 in)

18.0 mm 9U-6132 50.7 mm (2.00 in)

19.0 mm 9U-6133 52.5 mm (2.07 in)



ID: D01726T1


8.0 mm 271-4655 23.0 mm (0.91 in)

10.0 mm 271-4656 23.0 mm (0.91 in)

11.0 mm 271-4657 23.8 mm (0.94 in)

12.0 mm 271-4658 23.8 mm (0.94 in)

13.0 mm 271-4659 23.8 mm (0.94 in)

14.0 mm 271-4660 27.0 mm (1.06 in)

15.0 mm 271-4661 27.0 mm (1.06 in)

16.0 mm 271-4662 27.8 mm (1.09 in)

17.0 mm 271-4663 28.2 mm (1.11 in)

18.0 mm 271-4664 29.0 mm (1.14 in)

19.0 mm 271-4665 30.6 mm (1.20 in)

20.0 mm 271-4666 30.9 mm (1.22 in)

21.0 mm 271-4667 32.1 mm (1.26 in)

22.0 mm 271-4668 32.9 mm (1.30 in)



ID: D01720T1


8.0 mm 271-4639 54.0 mm (2.13 in)

9.0 mm 271-4640 54.0 mm (2.13 in)

10.0 mm 271-4641 54.0 mm (2.13 in)

11.0 mm 271-4642 54.0 mm (2.13 in)

12.0 mm 271-4643 54.0 mm (2.13 in)

13.0 mm 271-4644 54.0 mm (2.13 in)

14.0 mm 271-4645 60.3 mm (2.37 in)

15.0 mm 271-4646 60.3 mm (2.37 in)

16.0 mm 271-4647 60.3 mm (2.37 in)

17.0 mm 271-4648 66.7 mm (2.63 in)

18.0 mm 271-4650 66.7 mm (2.63 in)

19.0 mm 271-4651 66.7 mm (2.63 in)

21.0 mm 271-4652 66.7 mm (2.63 in)

24.0 mm 271-4653 73.0 mm (2.87 in)



ID: D01714T1


8 mm 271-4684 54.0 mm (2.13 in)

9 mm 271-4685 54.0 mm (2.13 in)

10 mm 271-4686 54.0 mm (2.13 in)

11 mm 271-4687 54.0 mm (2.13 in)

12 mm 271-4688 54.0 mm (2.13 in)

13 mm 271-4689 54.0 mm (2.13 in)

14 mm 271-4690 60.3 mm (2.37 in)

15 mm 271-4691 60.3 mm (2.37 in)

16 mm 271-4692 60.3 mm (2.37 in)

17 mm 271-4693 66.7 mm (2.63 in)

18 mm 271-4694 66.7 mm (2.63 in)

19 mm 271-4695 66.7 mm (2.63 in)

21 mm 271-4696 66.7 mm (2.63 in)

24 mm 271-4697 73.0 mm (2.87 in)

9U-6124 Universal Metric Socket Set, 9 Piece, 3⁄8 inch DriveSMCS Code: 1251-010, 0601Model: 3066 EngineWarranty: Lifetime

• 9U-6128 used to remove and install fuel injection pump• Standard length, 12 point universal socket set• Specially forged and heat treated for toughness and

long life—meets rigid industry standards• Includes socket bar and clips



and

Tool

s

ID: C54508T1

01b.qxp 10/5/06 1:24 PM Page 28

227-8209 Crowfoot WrenchSMCS Code: 1453-010Model: TH210 and TH215 TelehandlerWarranty: Lifetime

• Used to remove and install starter motor bolts• Proper installation is very difficult without this tool• Chrome-plated

ReferenceRENR5153 Service Manual

ID: D00357T1

Size 15 mm

Square drive 3⁄8 inch

Maximum torque 42 N·m (375 in lbs)

Center of square drive to center of wrench 18.8 mm (.74 in)


• 12 point• 1⁄2 inch drive• Standard length sockets• Polished chrome finish• Includes socket bar and clips ID: C80288T1


12.0 mm 199-6149 38.1 mm (1.50 in)

13.0 mm 199-6150 38.1 mm (1.50 in)

14.0 mm 8T-3041 38.1 mm (1.50 in)

15.0 mm 6V-9110 38.1 mm (1.50 in)

16.0 mm 6V-9111 38.1 mm (1.50 in)

17.0 mm 6V-9112 38.1 mm (1.50 in)

18.0 mm 6V-9113 38.1 mm (1.50 in)

19.0 mm 6V-9114 38.1 mm (1.50 in)

20.0 mm 199-6152 38.1 mm (1.50 in)

21.0 mm 6V-9115 38.1 mm (1.50 in)

22.0 mm 6V-9116 38.1 mm (1.50 in)

23.0 mm 199-6153 38.1 mm (1.50 in)

24.0 mm 199-6154 38.8 mm (1.53 in)



ID: C80289T1


16.0 mm 194-3505 82.6 mm (3.25 in)

17.0 mm 194-3506 82.6 mm (3.25 in)

18.0 mm 194-3510 82.6 mm (3.25 in)

19.0 mm 194-3511 82.6 mm (3.25 in)

20.0 mm 194-3512 82.6 mm (3.25 in)

21.0 mm 194-3513 82.6 mm (3.25 in)

22.0 mm 194-3514 82.6 mm (3.25 in)

24.0 mm 194-3515 82.6 mm (3.25 in)

25.0 mm 194-3516 82.6 mm (3.25 in)

26.0 mm 194-3517 82.6 mm (3.25 in)

213-6923 Impact Socket Set, 12 Piece, 1⁄2 Inch DriveWarranty: See individual part number

• 6 point• 1⁄2 inch drive• Black oxide finish• Standard length impact sockets• Includes socket bar and clips


Hand Tools (Metric) Socket SetsH

and Tools

ID: C33225T1


10.0 mm 213-6926 38.1 mm (1.50 in)

11.0 mm 213-6927 38.1 mm (1.50 in)

12.0 mm 213-6928 38.1 mm (1.50 in)

13.0 mm 213-6929 38.1 mm (1.50 in)

14.0 mm 213-6930 38.1 mm (1.50 in)

15.0 mm 213-6932 38.1 mm (1.50 in)

16.0 mm 213-6933 38.1 mm (1.50 in)

17.0 mm 213-6934 38.1 mm (1.50 in)

18.0 mm 213-6935 38.1 mm (1.50 in)

19.0 mm 213-6936 38.1 mm (1.50 in)

20.0 mm 213-6924 38.1 mm (1.50 in)

21.0 mm 213-6937 38.1 mm (1.50 in)

01b.qxp 10/5/06 1:24 PM Page 29

ID: C79418T1


• 6 point• 1⁄2 inch drive• Black oxide finish• Deep length impact sockets• Includes socket bar and clips

ID: C80483T1


10.0 mm 214-6644 82.6 mm (3.25 in)

11.0 mm 214-6645 82.6 mm (3.25 in)

12.0 mm 214-6646 82.6 mm (3.25 in)

13.0 mm 214-6647 82.6 mm (3.25 in)

14.0 mm 214-6648 82.6 mm (3.25 in)

15.0 mm 214-6649 82.6 mm (3.25 in)

16.0 mm 214-6650 82.6 mm (3.25 in)

17.0 mm 214-6651 82.6 mm (3.25 in)

18.0 mm 214-6652 82.6 mm (3.25 in)

19.0 mm 214-6653 82.6 mm (3.25 in)

20.0 mm 214-7346 82.6 mm (3.25 in)

261-8572 Metric Swivel Impact Socket Set, 7 Piece, 3⁄8 inch DriveWarranty: Lifetime

ID: D00708T1


10.0 mm 261-8573 50.8 mm (2.0 in)

12.0 mm 261-8574 53.1 mm (2.09 in)

13.0 mm 261-8575 54.1 mm (2.13 in)

14.0 mm 261-8576 55.4 mm (2.18 in)

15.0 mm 261-8577 56.4 mm (2.22 in)

17.0 mm 261-8578 62.2 mm (2.49 in)

18.0 mm 261-8579 64.0 mm (2.52 in)

246-8199 Metric Universal Impact Socket Set, 10 Piece, 1⁄2 inch DriveWarranty: See individual part number

• 6 point• 1⁄2 inch square drive• Black oxide finish• Standard length impact sockets• Includes socket bar and clips

ID: D01119T1


10.0 mm 246-8185 73.7 mm (2.90 in)

11.0 mm 246-8186 73.7 mm (2.90 in)

12.0 mm 246-8187 73.7 mm (2.90 in)

13.0 mm 246-8188 73.7 mm (2.90 in)

14.0 mm 246-8189 73.7 mm (2.90 in)

15.0 mm 246-8190 73.7 mm (2.90 in)

16.0 mm 246-8191 73.7 mm (2.90 in)

17.0 mm 246-8192 77.8 mm (3.06 in)

18.0 mm 246-8194 77.7 mm (3.06 in)

19.0 mm 246-8197 77.7 mm (3.06 in)

9U-6547 Impact Socket Set, 24 Piece, 3⁄4 inch DriveWarranty: See individual part number

• 6 point• 3⁄4 inch drive• Black oxide finish• Standard length impact sockets


27.0 mm 9U-6531 50.8 mm (2.00 in)

28.0 mm 9U-6532 53.8 mm (2.12 in)

30.0 mm 9U-6533 53.8 mm (2.12 in)

31.0 mm 9U-6534 54.0 mm (2.13 in)

32.0 mm 9U-6535 53.8 mm (2.12 in)

33.0 mm 9U-6536 53.8 mm (2.12 in)

34.0 mm 9U-6537 54.0 mm (2.13 in)

35.0 mm 9U-6538 57.2 mm (2.25 in)

36.0 mm 9U-6539 57.2 mm (2.25 in)

38.0 mm 9U-6540 57.2 mm (2.25 in)

40.0 mm 9U-6541 66.7 mm (2.63 in)

41.0 mm 9U-6542 66.5 mm (2.62 in)

42.0 mm 9U-6543 66.5 mm (2.62 in)

43.0 mm 9U-6544 66.5 mm (2.62 in)

46.0 mm 9U-6545 66.7 mm (2.63 in)

50.0 mm 9U-6546 73.2 mm (2.88 in)



and

Tool

s


17.0 mm 9U-6523 44.5 mm (1.75 in)

19.0 mm 9U-6524 44.5 mm (1.75 in)

20.0 mm 9U-6525 44.5 mm (1.75 in)

21.0 mm 9U-6526 47.8 mm (1.88 in)

22.0 mm 9U-6527 47.6 mm (1.87 in)

23.0 mm 9U-6528 47.8 mm (1.88 in)

24.0 mm 9U-6529 47.6 mm (1.87 in)

26.0 mm 9U-6530 50.8 mm (2.00 in)

01b.qxp 10/5/06 1:24 PM Page 30

ID: C33228T1

194-3585 Metric Hex Driver Set, 9 PieceWarranty: See individual part number

• Includes socket bar and clips Hex Drive Bit OverallSize Size Part No. Length Length

4.0 mm 3⁄8 in 194-3541 25.4 mm 52.3 mm (2.06 in)

5.0 mm 3⁄8 in 194-3542 25.7 mm 52.6 mm (2.07 in)

6.0 mm 3⁄8 in 194-3543 25.7 mm 52.6 mm (2.07 in)

7.0 mm 3⁄8 in 194-3544 25.7 mm 52.6 mm (2.07 in)

8.0 mm 3⁄8 in 194-3545 25.1 mm 52.1 mm (2.05 in)

10.0 mm 3⁄8 in 194-3546 25.5 mm 52.5 mm (2.07 in)

12.0 mm 1⁄2 in 194-3547 — 81.0 mm (3.19 in)

14.0 mm 1⁄2 in 194-3548 — 81.0 mm (3.19 in)

17.0 mm 1⁄2 in 194-3549 — 93.7 mm (3.69 in)

Individual Metric Hex DriversWarranty: Lifetime

Hex Drive Bit Ext. Overall ReplacementSize Size Part No. Length Length Bit

6.0 mm 3⁄8 in 194-3543 25.7 mm 52.6 mm (2.07 in) —

10.0 mm 1⁄2 in 6V-9085 23.9 mm 62.0 mm (2.44 in) —

14.0 mm 1⁄2 in 6V-9086 35.0 mm 81.0 mm (3.19 in) —

17.0 mm 3⁄4 in 1U-6151 47.0 mm 92.0 mm (3.62 in) 1U-6152

17.0 mm 3⁄4 in 168-8395 50.8 mm 61.7 mm (2.43 in) 169-0782

19.0 mm 3⁄4 in 9U-7418 47.7 mm 111.3 mm (4.39 in) 1U-7419

22.0 mm 1 in 1U-9474 32.0 mm 84.0 mm (3.31 in) 1U-9476

24.0 mm 140-8780 1 50.8 mm 50.8 mm (2.00 in) —

27.0 mm 1 in 129-4552 72.0 mm 129.0 mm (5.08 in) 129-45531 Hex bit only

243-5182 Metric Hex Ball Driver Socket Set, 8 PieceWarranty: See individual part number

• Four 1⁄4 inch drive hex ball sockets and four 3⁄8 inch drive hex ball sockets• Material: steel• Includes socket bar and clips

ID: D01137T1

Hex Drive Bit OverallSize Size Part No. Length Length

3 mm 1⁄4 in 243-5190 — 47.7 mm (1.88 in)

4 mm 1⁄4 in 243-5184 — 47.6 mm (1.87 in)

5 mm 1⁄4 in 243-5185 — 47.9 mm (1.89 in)

6 mm 1⁄4 in 243-5186 — 47.9 mm (1.89 in)

7 mm 3⁄8 in 243-5187 25.6 mm 52.5 mm (2.07 in)

8 mm 3⁄8 in 243-5188 25.6 mm 52.5 mm (2.07 in)

9 mm 3⁄8 in 243-5189 25.6 mm 52.5 mm (2.07 in)

10 mm 3⁄8 in 243-5183 25.6 mm 52.5 mm (2.07 in)

Individual Metric Hex Ball DriversWarranty: Lifetime

Hex Drive Bit Ext. OverallSize Size Part No. Length Length

4.0 mm 3⁄8 in 4C-8996 101.3 mm 128.3 mm (5.05 in)

10.0 mm 3⁄8 in 155-3046 101.3 mm 128.3 mm (5.05 in)


Hand Tools (Metric) Socket SetsH

and Tools

01b.qxp 10/5/06 1:24 PM Page 31

Individual Sockets, 1⁄4 through 11⁄2 inch DriveWarranty: Lifetime except impact sockets

which are Six Months

• All sockets are polished chrome finish unless otherwise noted

ID: C33413T1



4.0 mm 200-8415 22.2 mm (.87 in)

5.0 mm 200-8417 22.2 mm (.87 in)

5.5 mm 200-8418 22.2 mm (.87 in)

6.0 mm 200-8419 22.2 mm (.87 in)

7.0 mm 200-8420 22.2 mm (.87 in)

8.0 mm 200-8421 22.2 mm (.87 in)

9.0 mm 200-8422 22.2 mm (.87 in)

10.0 mm 200-8423 22.2 mm (.87 in)

11.0 mm 200-8424 22.2 mm (.87 in)

12.0 mm 200-8426 22.2 mm (.87 in)

13.0 mm 200-8427 22.2 mm (.87 in)

14.0 mm 200-8428 22.2 mm (.87 in)

15.0 mm 200-8429 23.0 mm (.91 in)



6.0 mm 194-3518 50.8 mm (2.0 in)

7.0 mm 194-3519 50.8 mm (2.0 in)

8.0 mm 194-3521 50.8 mm (2.0 in)

9.0 mm 194-3522 50.8 mm (2.0 in)

10.0 mm 194-3523 50.8 mm (2.0 in)

11.0 mm 194-3527 50.8 mm (2.0 in)

12.0 mm 194-3528 50.8 mm (2.0 in)

13.0 mm 194-3529 50.8 mm (2.0 in)

14.0 mm 194-3530 50.8 mm (2.0 in)



8.0 mm 194-3480 23.0 mm (.91 in)9.0 mm 194-3483 23.0 mm (.91 in)10.0 mm 194-3488 23.0 mm (.91 in)11.0 mm 194-3490 23.0 mm (.91 in)12.0 mm 194-3492 23.8 mm (.94 in)13.0 mm 194-3494 24.6 mm (.97 in)14.0 mm 194-3495 26.2 mm (1.03 in)15.0 mm 194-3496 27.0 mm (1.06 in)16.0 mm 194-3497 27.8 mm (1.09 in)17.0 mm 194-3498 28.6 mm (1.13 in)18.0 mm 194-3499 28.6 mm (1.13 in)19.0 mm 194-3500 30.2 mm (1.19 in)



8.0 mm 199-9023 54.0 mm (2.13 in)9.0 mm 199-9025 54.0 mm (2.13 in)10.0 mm 199-9026 54.0 mm (2.13 in)11.0 mm 199-9027 54.0 mm (2.13 in)12.0 mm 199-9028 54.0 mm (2.13 in)13.0 mm 199-9029 54.0 mm (2.13 in)14.0 mm 199-9030 60.3 mm (2.37 in)15.0 mm 199-9031 60.3 mm (2.37 in)16.0 mm 199-9032 60.3 mm (2.37 in)17.0 mm 199-9033 66.7 mm (2.63 in)18.0 mm 199-9034 66.7 mm (2.63 in)19.0 mm 199-9035 66.7 mm (2.63 in)



8.0 mm 214-6621 23.0 mm (.91 in)9.0 mm 214-6623 23.0 mm (.91 in)10.0 mm 214-6624 23.0 mm (.91 in)11.0 mm 214-6625 23.0 mm (.91 in)12.0 mm 214-6626 23.8 mm (.94 in)13.0 mm 214-6627 24.6 mm (.97 in)14.0 mm 214-6628 26.2 mm (1.03 in)15.0 mm 214-6629 27.0 mm (1.06 in)16.0 mm 214-6630 27.8 mm (1.09 in)17.0 mm 214-6631 28.6 mm (1.13 in)18.0 mm 214-6632 28.6 mm (1.13 in)19.0 mm 214-6633 30.2 mm (1.19 in)



10.0 mm 214-6635 54.0 mm (2.13 in)11.0 mm 214-6636 54.0 mm (2.13 in)12.0 mm 214-6637 54.0 mm (2.13 in)13.0 mm 214-6638 54.0 mm (2.13 in)14.0 mm 214-6639 60.3 mm (2.37 in)15.0 mm 214-6640 60.3 mm (2.37 in)17.0 mm 214-6641 66.7 mm (2.63 in)19.0 mm 214-6642 66.7 mm (2.63 in)

3⁄8 inch Drive, Universal Standard Length Sockets, 12 Point


10.0 mm 9U-6125 43.5 mm (1.71 in)12.0 mm 9U-6126 45.5 mm (1.79 in)13.0 mm 9U-6127 45.5 mm (1.79 in)14.0 mm 9U-6128 47.9 mm (1.89 in)15.0 mm 9U-6129 47.9 mm (1.89 in)16.0 mm 9U-6130 47.9 mm (1.89 in)17.0 mm 9U-6131 50.7 mm (2.00 in)18.0 mm 9U-6132 50.7 mm (2.00 in)19.0 mm 9U-6133 52.5 mm (2.07 in)

3⁄8 inch Drive, Impact Standard Length Sockets, 12 Point


8.0 mm 271-4623 23.0 mm (0.91 in)8.0 mm 271-4655 23.0 mm (0.91 in)9.0 mm 271-4624 23.0 mm (0.91 in)10.0 mm 271-4625 23.0 mm (0.91 in)10.0 mm 271-4656 23.0 mm (0.91 in)11.0 mm 271-4626 23.8 mm (0.94 in)11.0 mm 271-4657 23.8 mm (0.94 in)12.0 mm 271-4627 23.8 mm (0.94 in)12.0 mm 271-4658 23.8 mm (0.94 in)13.0 mm 271-4628 24.6 mm (0.97 in)13.0 mm 271-4659 23.8 mm (0.94 in)14.0 mm 271-4630 27.0 mm (1.06 in)14.0 mm 271-4660 27.0 mm (1.06 in)15.0 mm 271-4631 27.0 mm (1.06 in)15.0 mm 271-4661 27.0 mm (1.06 in)16.0 mm 271-4632 27.8 mm (1.09 in)16.0 mm 271-4662 27.8 mm (1.09 in)17.0 mm 271-4633 28.2 mm (1.11 in)17.0 mm 271-4663 28.2 mm (1.11 in)18.0 mm 271-4634 29.0 mm (1.14 in)18.0 mm 271-4664 29.0 mm (1.14 in)19.0 mm 271-4635 30.6 mm (1.20 in)19.0 mm 271-4665 30.6 mm (1.20 in)20.0 mm 271-4666 30.9 mm (1.22 in)21.0 mm 271-4636 29.5 mm (1.16 in)21.0 mm 271-4667 32.1 mm (1.26 in)22.0 mm 271-4668 32.9 mm (1.30 in)24.0 mm 271-4637 33.0 mm (1.30 in)

3⁄8 inch Drive, Impact Deep Length Sockets, 12 Point


8 mm 271-4684 54.0 mm (2.13 in)9 mm 271-4685 54.0 mm (2.13 in)10 mm 271-4686 54.0 mm (2.13 in)11 mm 271-4687 54.0 mm (2.13 in)12 mm 271-4688 54.0 mm (2.13 in)13 mm 271-4689 54.0 mm (2.13 in)14 mm 271-4690 60.3 mm (2.37 in)15 mm 271-4691 60.3 mm (2.37 in)16 mm 271-4692 60.3 mm (2.37 in)17 mm 271-4693 66.7 mm (2.63 in)18 mm 271-4694 66.7 mm (2.63 in)19 mm 271-4695 66.7 mm (2.63 in)21 mm 271-4696 66.7 mm (2.63 in)24 mm 271-4697 73.0 mm (2.87 in)


Individual Sockets Hand Tools (Metric)H

and

Tool

s

01b.qxp 10/5/06 1:24 PM Page 32

Individual Sockets, 3⁄8 inch Drive (cont’d)3⁄8 inch Drive, Impact Deep Length Sockets, 6 Point,

Individual Sockets, 1⁄2 inch Drive1⁄2 inch Drive, Deep Length Sockets, 6 Point


36.0 mm 242-0779 88.9 mm (3.50 in)



12.0 mm 199-6149 38.1 mm (1.50 in)

13.0 mm 199-6150 38.1 mm (1.50 in)

14.0 mm 8T-3041 38.1 mm (1.50 in)

15.0 mm 6V-9110 38.1 mm (1.50 in)

16.0 mm 6V-9111 38.1 mm (1.50 in)

17.0 mm 6V-9112 38.1 mm (1.50 in)

18.0 mm 6V-9113 38.1 mm (1.50 in)

19.0 mm 6V-9114 38.1 mm (1.50 in)

20.0 mm 199-6152 38.1 mm (1.50 in)

21.0 mm 6V-9115 38.1 mm (1.50 in)

22.0 mm 6V-9116 38.1 mm (1.50 in)

23.0 mm 199-6153 38.1 mm (1.50 in)

24.0 mm 199-6154 38.8 mm (1.53 in)

25.0 mm 194-3558 38.8 mm (1.53 in)

26.0 mm 194-3559 41.2 mm (1.62 in)

27.0 mm 194-3562 42.8 mm (1.69 in)

28.0 mm 194-3563 44.4 mm (1.75 in)

29.0 mm 194-3564 44.4 mm (1.75 in)

30.0 mm 194-3565 44.4 mm (1.75 in)

31.0 mm 194-3566 47.6 mm (1.87 in)

32.0 mm 194-3567 47.6 mm (1.87 in)



16.0 mm 194-3505 82.6 mm (3.25 in)

17.0 mm 194-3506 82.6 mm (3.25 in)

18.0 mm 194-3510 82.6 mm (3.25 in)

19.0 mm 194-3511 82.6 mm (3.25 in)

20.0 mm 194-3512 82.6 mm (3.25 in)

21.0 mm 194-3513 82.6 mm (3.25 in)

22.0 mm 194-3514 82.6 mm (3.25 in)

24.0 mm 194-3515 82.6 mm (3.25 in)

25.0 mm 194-3516 82.6 mm (3.25 in)

26.0 mm 194-3517 82.6 mm (3.25 in)



10.0 mm 213-6926 38.1 mm (1.50 in)

11.0 mm 213-6927 38.1 mm (1.50 in)

12.0 mm 213-6928 38.1 mm (1.50 in)

13.0 mm 213-6929 38.1 mm (1.50 in)

14.0 mm 213-6930 38.1 mm (1.50 in)

15.0 mm 213-6932 38.1 mm (1.50 in)

16.0 mm 213-6933 38.1 mm (1.50 in)

17.0 mm 213-6934 38.1 mm (1.50 in)

18.0 mm 213-6935 38.1 mm (1.50 in)

19.0 mm 213-6936 38.1 mm (1.50 in)

20.0 mm 213-6924 38.1 mm (1.50 in)

21.0 mm 213-6937 38.1 mm (1.50 in)

1⁄2 inch Drive, Deep Length Impact Sockets, 6 Point, Satin


10.0 mm 214-6644 82.6 mm (3.25 in)

11.0 mm 214-6645 82.6 mm (3.25 in)

12.0 mm 214-6646 82.6 mm (3.25 in)

13.0 mm 214-6647 82.6 mm (3.25 in)

14.0 mm 214-6648 82.6 mm (3.25 in)

15.0 mm 214-6649 82.6 mm (3.25 in)

16.0 mm 214-6650 82.6 mm (3.25 in)

17.0 mm 214-6651 82.6 mm (3.25 in)

18.0 mm 214-6652 82.6 mm (3.25 in)

19.0 mm 214-6653 82.6 mm (3.25 in)

20.0 mm 214-7346 82.6 mm (3.25 in)

1⁄2 inch Drive, Deep Length Impact Sockets, 6 Point, Satin


8.0 mm 1U-7936 82.5 mm (3.25 in)

9.0 mm 1U-7937 82.5 mm (3.25 in)

10.0 mm 1U-7938 82.5 mm (3.25 in)

11.0 mm 1U-7939 82.5 mm (3.25 in)

12.0 mm 1U-7941 82.5 mm (3.25 in)

13.0 mm 1U-7942 82.5 mm (3.25 in)

14.0 mm 1U-7943 82.5 mm (3.25 in)

15.0 mm 1U-7944 82.5 mm (3.25 in)

16.0 mm 214-6650 82.5 mm (3.25 in)

17.0 mm 1U-7946 82.5 mm (3.25 in)

18.0 mm 214-6652 82.5 mm (3.25 in)

19.0 mm 1U-7948 82.5 mm (3.25 in)


Hand Tools (Metric) Individual SocketsH

and Tools


8.0 mm 271-4639 54.0 mm (2.13 in)

9.0 mm 271-4640 54.0 mm (2.13 in)

10.0 mm 271-4641 54.0 mm (2.13 in)

11.0 mm 271-4642 54.0 mm (2.13 in)

12.0 mm 271-4643 54.0 mm (2.13 in)

13.0 mm 271-4644 54.0 mm (2.13 in)

14.0 mm 271-4645 60.3 mm (2.37 in)


15.0 mm 271-4646 60.3 mm (2.37 in)

16.0 mm 271-4647 60.3 mm (2.37 in)

17.0 mm 271-4648 66.7 mm (2.63 in)

18.0 mm 271-4650 66.7 mm (2.63 in)

19.0 mm 271-4651 66.7 mm (2.63 in)

21.0 mm 271-4652 66.7 mm (2.63 in)

24.0 mm 271-4653 73.0 mm (2.87 in)



24.0 mm 6V-9117 50.8 mm (2.00 in)

30.0 mm 6V-9118 57.2 mm (2.25 in)

36.0 mm 6V-9119 58.7 mm (2.31 in)

46.0 mm 6V-9120 73.0 mm (2.87 in)

3⁄4 inch Drive, Standard Length Impact Sockets, 12 Point


20.0 mm 152-1058 55.5 mm (2.19 in)



36.0 mm 175-6797 89.0 mm (3.50 in)

43.0 mm 6V-7874 88.9 mm (3.50 in)



17.0 mm 9U-6523 44.5 mm (1.75 in)

19.0 mm 9U-6524 44.5 mm (1.75 in)

20.0 mm 9U-6525 44.5 mm (1.75 in)

21.0 mm 9U-6526 47.8 mm (1.88 in)

22.0 mm 9U-6527 47.6 mm (1.87 in)

23.0 mm 9U-6528 47.8 mm (1.88 in)

24.0 mm 9U-6529 47.6 mm (1.87 in)

26.0 mm 9U-6530 50.8 mm (2.00 in)

27.0 mm 9U-6531 50.8 mm (2.00 in)

28.0 mm 9U-6532 53.8 mm (2.12 in)

30.0 mm 9U-6533 53.8 mm (2.12 in)

31.0 mm 9U-6534 54.0 mm (2.13 in)


32.0 mm 9U-6535 54.0 mm (2.13 in)

33.0 mm 9U-6536 53.8 mm (2.12 in)

34.0 mm 9U-6537 54.0 mm (2.13 in)

35.0 mm 9U-6538 57.2 mm (2.25 in)

36.0 mm 9U-6539 57.2 mm (2.25 in)

38.0 mm 9U-6540 57.2 mm (2.25 in)

40.0 mm 9U-6541 66.7 mm (2.63 in)

41.0 mm 9U-6542 66.5 mm (2.62 in)

42.0 mm 9U-6543 66.5 mm (2.62 in)

43.0 mm 9U-6544 66.5 mm (2.62 in)

46.0 mm 9U-6545 66.7 mm (2.63 in)

50.0 mm 9U-6546 73.2 mm (12.88 in)

01b.qxp 10/5/06 1:24 PM Page 33

ID: C80178T1

Typical Stacking

Socket


203-5431 Stacking Socket female 15⁄16, male 36 mm

203-5432 Stacking Socket female 11⁄2, male 36 mm

203-5433 Stacking Socket female 36 mm, male 36 mm



Individual Sockets, 1 inch Drive1 inch Drive, Standard Length Impact Sockets, 6 Point


36.0 mm 9U-5089 63.5 mm (2.5 in)

46.0 mm 207-8155 66.5 mm (2.62 in)

46.0 mm 4C-6724 73.5 mm (2.89 in)

1 inch Drive, Deep Length Impact Sockets, 6 Point


55.0 mm 4C-8217 111 mm (4.38 in)

Individual Sockets, 11⁄2 inch Drive11⁄2 inch Drive, Standard Length Impact Sockets, 6 Point


46 mm 207-8155 86 mm (3.51 in)

55.0 mm 136-5189 90.4 mm (3.56 in)

65.0 mm 132-8743 102.4 mm (4.03 in)

70.0 mm 136-5190 107.1 mm (4.22 in)

Spline Drive SocketNo. 5 Spline, Standard Length Impact Socket, 6 Point


55 mm 159-2833 94.5 mm (3.72 in)

159-2833 Hex Socket, 55 mm (Spline Drive)Model: 797 Off-Highway Trucks

• Used to remove and install tires and rims using M36 bolts with 55 mm hex head• Used with 4C-9813 Extension, 6V-6080 Torque Multiplier, 8T-5230 Air Regulated Wrench, and 4C-9814 Reaction Bar• Black industrial finish• High-strength, impact socket

ID: C79280T1

Hex size 55 mm (23⁄16 in), six point

Drive size #5 spline

Overall length 94.5 mm (3.72 in)

Diameter 78.6 mm (3.09 in)

Stacking SocketsModel: 777, 785, 789, 793, 797 Off-Highway Trucks

• Used to tighten brake anchor nuts• Used with hydraulic wrench systems• Allows access to limited clearance areas• Ensures accurately tightened anchor nuts

233-1642 Metric Ratchet Set, 17 PieceWarranty: Lifetime

• Socket contacts the fastener on the flats rather than on the corners, preventing rounding of the fastener and allowing for more torque to be applied

• Concentric or uniform wall thickness eliminates weak spots while allowing for a thin wall design for greater accessibility

• Creates positive engagement with the drive tool for a tight/slop-free driving system. Detents are located on all four inner walls ensuring positive engagement with the drive tool in any orientation.

• Hex and drive ends of the socket are countersunk or funnel-shaped, making engagement with the fastener or drive tool quicker and easier

• Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish

Drive Size Part No. Length Description

4.0 mm 200-8415 22.2 mm (0.87 in) Socket (1⁄4 in Drive)












15.0 mm 200-8429 23.0 mm (0.91 in) Socket (1⁄4 in Drive)1⁄4 in 9U-6635 112.3 mm (4.42 in) Ratchet1⁄4 in 9S-1720 50.8 mm (2.00 in) Socket Extension1⁄4 in 9S-1721 101.6 mm (4.00 in) Socket Extension1⁄4 in 9S-1724 Universal Joint


Individual Sockets / Wrench Sets Hand Tools (Metric)H

and

Tool

s

1 inch Drive, Tapered1 Impact Sockets, 6 Point


19.0 mm 1U-7626 89.0 mm (3.50 in)

22.0 mm 1U-7627 89.0 mm (3.50 in)

24.0 mm 1U-7628 89.0 mm (3.50 in)

27.0 mm 1U-7629 89.0 mm (3.50 in)

30.0 mm 1U-7630 89.0 mm (3.50 in)

32.0 mm 1U-7631 89.0 mm (3.50 in)1 Special design for excavator track bolts; not

intended for general use

ID: il2, D00731T1

01b.qxp 10/5/06 1:24 PM Page 34

Drive Size Part No. Length

10.0 mm 6V-9090 171.0 mm (6.73 in)

11.0 mm 6V-9091 184.0 mm (7.24 in)

12.0 mm 6V-9092 195.0 mm (7.68 in)

13.0 mm 6V-9093 207.0 mm (8.15 in)

14.0 mm 6V-9094 219.0 mm (8.62 in)

15.0 mm 6V-9095 233.0 mm (9.17 in)

16.0 mm 6V-9096 242.0 mm (9.53 in)

17.0 mm 6V-9097 256.0 mm (10.08 in)

18.0 mm 6V-9098 267.0 mm (10.51 in)

19.0 mm 6V-9099 280.0 mm (11.02 in)

1U-5545 Combination Wrench Set, 14 PieceWarranty: Lifetime

• Metric, 6.0 mm through 19.0 mm• Polished chrome finish• Includes storage pouch

ID: C79499T1


6.0 mm 1U-5546 113.0 mm (4.45 in)

7.0 mm 1U-5547 118.0 mm (4.65 in)

8.0 mm 1U-5548 123.0 mm (4.84 in)

9.0 mm 1U-5549 159.0 mm (6.26 in)

10.0 mm 6V-9090 171.0 mm (6.73 in)

11.0 mm 6V-9091 184.0 mm (7.24 in)

12.0 mm 6V-9092 195.0 mm (7.68 in)

13.0 mm 6V-9093 207.0 mm (8.15 in)

14.0 mm 6V-9094 219.0 mm (8.62 in)

15.0 mm 6V-9095 233.0 mm (9.17 in)

16.0 mm 6V-9096 242.0 mm (9.53 in)

17.0 mm 6V-9097 256.0 mm (10.08 in)

18.0 mm 6V-9098 267.0 mm (10.51 in)

19.0 mm 6V-9099 280.0 mm (11.02 in)

Individual Combination WrenchesWarranty: Lifetime

• 15° angle on open end and 15° offset on box end


Hand Tools (Metric) Wrench Sets / Individual Wrenches


6.0 mm 1U-5546 113.0 mm (4.45 in)

7.0 mm 1U-5547 118.0 mm (4.65 in)

8.0 mm 1U-5548 123.0 mm (4.84 in)

9.0 mm 1U-5549 159.0 mm (6.26 in)

10.0 mm 6V-9090 171.0 mm (6.73in)

11.0 mm 6V-9091 184.0 mm (7.24 in)

12.0 mm 6V-9092 195.0 mm (7.68 in)

13.0 mm 6V-9093 207.0 mm (8.15 in)

14.0 mm 6V-9094 219.0 mm (8.62 in)

15.0 mm 6V-9095 233.0 mm (9.17 in)

16.0 mm 6V-9096 242.0 mm (9.53 in)

17.0 mm 6V-9097 256.0 mm (10.08 in)

18.0 mm 6V-9098 267.0 mm (10.51 in)

19.0 mm 6V-9099 280.0 mm (11.02 in)


20.0 mm 6V-9100 292.0 mm (11.50 in)

21.0 mm 6V-9101 304.0 mm (11.97 in)

22.0 mm 6V-9102 318.0 mm (12.52 in)

23.0 mm 214-7214 328.0 mm (12.91 in)

24.0 mm 6V-9103 338.0 mm (13.31 in)

25.0 mm 214-7215 356.0 mm (14.02 in)

26.0 mm 214-7217 364.0 mm (14.33 in)

27.0 mm 214-7218 376.0 mm (14.80 in)

29.0 mm 214-7220 395.0 mm (15.55 in)

30.0 mm 6V-9104 414.0 mm (16.30 in)

32.0 mm 214-7222 433.0 mm (17.00 in)

36.0 mm 214-7223 490.0 mm (19.29 in)

46.0 mm 9U-5130 596.0 mm (23.46 in)

ID: il2, D00713T1

233-1632 Metric Wrench Set, 10 PieceWarranty: Lifetime

• Increased torque — wrench box end contacts the fastener on the flats rather than on the corners, preventing rounding of the fastener and allowing for more torque to be applied

• Concentric or uniform wall thickness on the box end eliminates weak spots while allowing for a thin wall design for greater accessibility

• Continuous arc open end design evenly distributes applied stress over the entire radius of the open end, enhancing the wrench strength and life of the tool

• Long handles for better reach and greater applied torque• Highly polished nickel/chrome plating — tough nickel for

corrosion resistance and chrome plating for wear resistance and a mirror-like finish

Hand Tools

01b.qxp 10/5/06 1:24 PM Page 35

248-8819 Metric Ratcheting Wrench Set, 12 pieceWarranty: Lifetime

• Dual pawl ratcheting box end• 15 degrees offset box head• Box ends are reversible• Durable nickel chrome finish

ID: D01353T1


8.0 mm 248-8820 135 mm (5.47 in)

9.0 mm 248-8822 150 mm (5.91 in)

10.0 mm 248-8823 160 mm (6.3 in)

11.0 mm 248-8824 170 mm (6.7 in)

12.0 mm 248-8825 175 mm (6.9 in)

13.0 mm 248-8826 180 mm (7.1 in)

14.0 mm 248-8827 190 mm (7.5 in)

15.0 mm 248-8828 200 mm (7.9 in)

16.0 mm 248-8829 210 mm (8.27 in)

17.0 mm 248-8830 230 mm (9.1 in)

18.0 mm 248-8831 240 mm (9.4 in)

19.0 mm 248-8832 250 mm (9.8 in)

214-7329 Wrench, 41.0 mm4C-4065 Wrench, 55.0 mmSMCS Code: 4303-010Model: See below

• As special application tools, used to remove and install front steering cylinder linkage knuckle on Cat vehicles listed below

• Forged steel, straight-handled, open end, with black oxide finish

ID: D00515T1

214-7329 Wrench Telescoping Material Handlers RT50, RT60 and RTC60; 214B Hydraulic Excavator

4C-4065 Wrench Telescoping Material Handlers RT50, RT60 and RTC60

Special Application Wrenches

ID: D01123T1

Part No. Description Size Application

9S-9149 Box, offset, chrome 7⁄16 inch Brake shoe bolt adjustment

128-8824 Deep, offset 16 mm/18 mm Fuel system

128-8825 Deep, offset 17 mm/19 mm Fuel system

8T-0833 Box, end, chrome, for use with 1⁄2 inch ratchet 9⁄16 inch Fuel pump

5P-5195 — — Fuel line

5P-0167 — — Brake spring

5P-0144 Socket, 1⁄2 inch drive — Fuel line


Individual Wrenches Hand Tools (Metric)H

and

Tool

s

01b.qxp 10/5/06 1:24 PM Page 36


Ratchet Wrenches / WrenchesH

and Tools

Miscellaneous Hand Tools

197-3672 Saw Adjustment WrenchModel: Harvester Head

• Used to adjust saw tension on newer model saw heads• Designed for easy access of adjustment nut• Wrench opening: 33⁄4 inch

ID: C79999T1

Ratchet WrenchesWarranty: Lifetime

• Available in hex sizes from 3⁄8 inch to 21⁄4 inch• Comes with either straight, integral handles or handles adapted for 1⁄2 inch or 3⁄4 inch

square drive• Wrenches equipped with 1⁄2 inch and 3⁄4 inch square drive handle. Can be used either

with torque wrenches, combined with 1⁄2 inch and 3⁄4 inch drive extensions, or used with a breaker bar.

• Ratchets in 45° increments (1⁄8 of a turn)• Forged steel jaws, heat treated high carbon steel handles, and stainless steel rivets

with a black corrosion-resistant finish

ID: C07366T1

ID: C07367T1

9U-6517 Ratchet WrenchSMCS Code: 7063-010, 7063-017, 0602Model: 5000 Series Mining ExcavatorsWarranty: Lifetime

• Used to quickly remove and install bolts (Use standard wrench for initial loosening; bolts cannot be tightened to final torque with ratchet wrench.)

• For 30 mm hex bolts• Fits 46 mm (113⁄16 in) bolt heads• Ratcheting style wrench greatly decreases time for removing or installing the many bolts

required to attach swing bearing/gear (Starting and running bolts down until seated, orremoving bolts, can take a large amount of time if done with conventional hand tools.)

ReferenceSENR6058, 5130 Service Manual Module, Disassembly and Assembly; SENR6108, 5230 Service Manual Module, Disassembly and Assembly; SEHS9721 Special Instruction, Assembly Procedure for Hydraulic Excavator (5130 only)

Type of wrench Ratcheting box end

Bolt head size 46.0 mm (1.81 in)

Torque specification up to 490 N·m (366 lb ft)

Thickness 16.0 mm (.63 in)

Head diameter 80.8 mm (3.18 in)

Overall length 354.0 mm (14.00 in)

ID: C66804T1

ID: C66828T1

Miscellaneous Hand Tools


Wrenches Miscellaneous Hand ToolsH

and

Tool

s

Individual Wrenches, 3⁄4 inch Square DriveWarranty: Lifetime

• Not sold as part of any sets — must be ordered individually Part No. Description Hex Size

1U-5732 Wrench Assembly 13⁄4 in


1U-5734 Wrench Assembly 2 in


8T-3120 Straight Handle Wrench Set, 11 PieceWarranty: Lifetime

ID: C07368T1

HexPart No. Size Torque Capacity

8T-3122 3⁄8 in 26 N·m (19 lb ft)

8T-3123 7⁄16 in 29 N·m (21 lb ft)

8T-3124 1⁄2 in 34 N·m (25 lb ft)

8T-3125 9⁄16 in 45 N·m (33 lb ft)

8T-3126 5⁄8 in 68 N·m (50 lb ft)

8T-3127 11⁄16 in 86 N·m (64 lb ft)

8T-3128 3⁄4 in 97 N·m (72 lb ft)

8T-3129 13⁄16 in 114 N·m (84 lb ft)

8T-3130 7⁄8 in 141 N·m (104 lb ft)

8T-3131 15⁄16 in 159 N·m (118 lb ft)

8T-3132 1 in 170 N·m (125 lb ft)

8T-3227 Straight Handle Wrench Set, 6 PieceWarranty: Lifetime

ID: C41282T1


8T-3133 11⁄16 in 190 N·m (140 lb ft)

8T-3134 11⁄8 in 200 N·m (150 lb ft)

8T-3135 11⁄4 in 270 N·m (200 lb ft)

8T-3136 13⁄8 in 340 N·m (250 lb ft)

8T-3137 11⁄2 in 410 N·m (300 lb ft)

8T-3138 15⁄8 in 475 N·m (350 lb ft)

8T-3228 Wrench Set, 11 Piece, 3⁄8 inch Square Drive HandleWarranty: Lifetime

ID: C07370T1


8T-3172 3⁄8 in 26 N·m (19 lb ft)

8T-3173 7⁄16 in 29 N·m (21 lb ft)

8T-3174 1⁄2 in 34 N·m (25 lb ft)

8T-3175 9⁄16 in 45 N·m (33 lb ft)

8T-3176 5⁄8 in 68 N·m (50 lb ft)

8T-3177 11⁄16 in 86 N·m (64 lb ft)

8T-3178 3⁄4 in 97 N·m (72 lb ft)

8T-3179 13⁄16 in 114 N·m (84 lb ft)

8T-3180 7⁄8 in 141 N·m (104 lb ft)

8T-3181 15⁄16 in 159 N·m (118 lb ft)

8T-3182 1 in 170 N·m (125 lb ft)

01b.qxp 10/5/06 1:24 PM Page 38


Miscellaneous Hand Tools WrenchesH

and Tools

Heavy-Duty Adjustable End Wrenches

• Designed for heavy-duty work• Accommodate many of the larger nuts on Caterpillar and other equipment• Cadmium coated to prevent rusting• Jaw adjusts in 1⁄8 inch increments

Jaw JawPart No. Range Thickness Length Weight

8F-2243 69.9-120.7 mm 28.6 mm 914.4 mm 10 kg(23⁄4 in-43⁄4 in) (11⁄8 in) (36 in) (22 lb)

8F-2239 34.9-73.0 mm 22.2 mm 609.6 mm 5 kg(13⁄8 in-27⁄8 in) (7⁄8 in) (24 in) (11 lb)

ID: B44848T1

ServiceParts

Component 8F-2243 8F-2239

Movable Jaw 8F-2245 8F-2241

Bolt 8F-2246 8F-2242

Nut 5B-3254 5B-3254

Handle 8F-2240

Heavy-Duty Box Wrenches

• Used to tighten large fasteners such as hitch pins

ID: C79481T1

Item Part No. Description Size

1 5P-7320 Box Wrench 38.1 mm (1.50 in)

2 9U-7376 Sledge Wrench 46.0 mm (1.81 in)

3 8T-3196 Wrench 47.6 mm (1.88 in)

4 5P-1661 Sledge Wrench 108.0 mm (4.25 in)

Adjustable Wrenches

ID: C07910T1

Part No. Jaw Range Length Finish

214-7322 24.0 mm (.94 in) 203.2 mm (8.00 in) Black Oxide

214-7323 29.0 mm (1.13 in) 254.0 mm (10.00 in) Black Oxide



1U-8760 Wrench for Special Applications

• Used for holding cylinders and other irregularly shaped objects—works for parts of most any size and shape• Special head design for turning wrench in either direction• Ratcheting action makes it possible to regrip without removal• Chain wrench capacity: 1⁄2 inch to 43⁄4 inch O.D

ID: C33394T1

1U-7608 Chain WrenchSMCS Code: 5102-017Model: D6H, D7H and motor graders prior to April 1987 G-Series production

• Used to remove and install threaded crowns on hydraulic cylinders• Grips cylindrical objects for assembly or disassembly• Black oxide finish, high carbon steel• Has 19 mm (3⁄4 in) square drive• Can be used with breaker bars, ratchets and torque wrenches• Can be used on threaded crowns up to 203 mm (8 in) in diameter• Tool is capable of withstanding in excess of 1000 ft-lb of torque

ID: C58234T1

Head length 114.3 mm (4 1⁄2 in)

Head length 53.97 mm (2 1⁄8 in)

Head thickness 34.92 mm (1 3⁄8 in)

Chain length 711.2 mm (28 in)

Weight .86 kg (1.90 lbs)

Rated capacity 1360 N·m (1000 ft-lb)

01b.qxp 10/5/06 1:24 PM Page 39



and

Tool

s

ID: C80005T1

ID: C80098T1

ID: 61239-1T1

ID: C05388T1


1 6H-7378 Retaining Ring

2 1P-0551 Spring Pin

3 2P-8253 Strap

175-7546 Oil Filter Cutter Group

• Used to cut open spin-on filters to inspect filter media for contaminants, a common practice when diagnosing potential machine problems and internal contaminants.

• Aluminum frame construction• Designed to cut all types of filters, including aircraft-style filters, without repositioning cutting wheels• Heavy-duty double roller and cutting wheel design eliminates binding of filters• All wear parts are heat-treated steel for added durability• Cutting wheels are ground with a double-taper edge for easier cutting Item Part No. Description Required

1 177-0364 Roller 2

2 177-0365 Cutting Wheel 2

3 177-0367 Pin 4

Not shown 177-0366 Spacer 2

174-9696 Final Drive Spanner WrenchSMCS Code: 4050-006, 0700-525Model: 555, 570, 580 Tree Harvesters

• Used to remove double bearing nut on final drive

Drive Square

Number of teeth 3

Tooth width 10.7 mm (.42 in)

Inside tooth diameter 87.0 mm (3.40 in)

Outside tooth diameter 96.3 mm (3.79 in)

3P-1535 Chain Wrench GroupSMCS Code: 4303-017, 5105-017, 5309-017, 5102-017Model: 16G, 518, 613C, 615, 910

• Used to remove and install threaded crown, which is used to retain head on later hydraulic cylinders• General purpose tool that can be used in many applications


1 3P-1536 Handle

2 1U-8792 Chain Wrench Assembly, Handle Length 482.6 mm (19.00 in)

3 1U-8791 Chain — part of 1U-8792, 76.2 mm (3.00 in) O.D. Minimum and 171.5 mm (6.75 in) O.D. Maximum

4 3P-1537 Pin — part of 1U-8792

187-2718 Filter WrenchSMCS Code: 5050-011Model: Various Models — including Skid Steer Loaders, Compact Wheel

Loaders, and Mini-Hex Excavators

• Used to remove spin-on oil and fuel filters• Makes filter removal quick and easy• Fits filter diameters between

88.9 to 98.6 mm (3.50 to 3.88 in)

185-3630 Filter Strap WrenchSMCS Code: 0602Model: Caterpillar Engines

• Provides quick, efficient service when removing or installing all spin-on type fuel and oil filters

• Capable of applying higher torques required on larger filters without denting filter can

01b.qxp 10/5/06 1:24 PM Page 40



and Tools

Nut Spanner Wrenches

ID: C07901T1

Item Part No. Description Diameter Range

1 1P-2856 Spanner Wrench 155.6-222.3 mm (6.13-8.75 in)

2 1P-2854 Spanner Wrench1 114.3-158.8 mm (4.50-6.25 in)



5 1P-2851 Spanner Wrench1 19.1-50.8 mm (.75-2.00 in)1 Part of 1P-2855 Spanner Wrench Group

Special Open End Wrenches

• Fit various nuts, bolt heads, etc. that are too large for ordinary hand tools

ID: C58294T1Size Part No.

15⁄8 in 9B-1496

17⁄8 in 0V-0455

29⁄32 in 8F-2239

23⁄4 in 9F-3869

31⁄2 in 1B-7412

214-7335 Wrench Set, Double End Flare Nut,3 PieceWarranty: Lifetime

ID: C80494T1

Size Part No. Length3⁄8 in x 7⁄16 in 214-7314 147.6 mm (5.81 in)1⁄2 in x 9⁄16 in 214-7315 173.0 mm (6.81 in)5⁄8 in x 11⁄16 in 214-7317 200.8 mm (7.91 in)

Individual Offset Wrenches, Double End Flare NutWarranty: Lifetime

ID: C79426T1

Size Part No. Length13⁄32 in and 15⁄32 in 5P-7254 127.0 mm (5.00 in)14⁄32 in and 19⁄32 in 5P-7255 165.1 mm (6.50 in)25⁄32 in and 29⁄32 in 5P-7256 190.5 mm (7.50 in)3⁄4 in and 1 in 9S-1743 203.2 mm (8.00 in)

Hex WrenchesSMCS Code: 3200-000, 0721, 3203Model: All skid steer loadersEssential Tool

• Used to remove hydrostatic pump assembly mounting bolts

159-3327• 21.0 mm hex end• 1⁄2 inch square drive

242-6163• 24.0 mm hex end• 1⁄2 inch square drive• Used on 287 Multi-Terrain Loader

ID: C80530T1

01b.qxp 10/5/06 1:24 PM Page 41



and

Tool

s

ID: D01603T1

200-1929 “L” Shaped Hex Allen KeyWrench Group, Metric, 9 Piece

• Sizes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm

• CAT® branded plastic holder included

ID: C80407T1

293-3026 Metric Hex Allen Key WrenchGroup with Ball End, Metric, 9 Piece

• Sizes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm


ID: D01609T1

200-1931 Hex Bit Set, 7 Piece

• Black oxide finish bits• Chrome plated case• 76.2 mm (3.00 in) long bits• Bit sizes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm

ID: C79427T1

9S-1742 Hex Bit Set, 9 Piece

• Black oxide finish• 3 inch bits• 31⁄2 inch cadmium case• Sizes: .05 inch, 1⁄16 inch, 5⁄64 inch, 3⁄32 inch, 7⁄64 inch, 1⁄8 inch,

9⁄64 inch, 5⁄32 inch, 3⁄16 inch

ID: C33507T1

ID: C80415T1

293-3025 Fractional Hex Allen KeyWrench Group with Ball End, Inch, 13 Piece

• Sizes: .05 inch, 1⁄16 inch, 5⁄64 inch, 3⁄32 inch, 7⁄64 inch, 1⁄8 inch, 9⁄64 inch, 5⁄32 inch, 3⁄16 inch, 7⁄32 inch, 1⁄4 inch, 5⁄16 inch and 3⁄8 inch


200-1928 “L” Shaped Hex Allen KeyWrench Group, Inch, 13 Piece

• Sizes: .05 inch, 1⁄16 inch, 5⁄64 inch, 3⁄32 inch, 7⁄64 inch, 1⁄8 inch, 9⁄64 inch, 5⁄32 inch, 3⁄16 inch, 7⁄32 inch, 1⁄4 inch, 5⁄16 inch and 3⁄8 inch


01b.qxp 10/5/06 1:24 PM Page 42



and Tools

256-4879 “L” Shaped Torx Wrench T50

• Length: 95.25 mm (3.75 in)• Flute length: 8.84 mm (0.348 in)• Material: steel

Hex Key Wrenches, Standard and Metric

• Extra length hex keys• Inch and metric sizes

ID: D01143T1

Part No. Size

1U-7559 1.5 mm

1U-7560 2 mm

1U-7561 2.5 mm

1U-7562 3 mm

1U-7563 4 mm

1U-7564 5 mm

1U-7565 6 mm

1U-7566 8 mm

1U-7567 10 mm

1U-7568 12 mm

1U-7569 14 mm

1U-7570 17 mm

1U-7571 19 mm

4C-4067 22 mm

1U-7572 1⁄16 in

Part No. Size

1U-7573 5⁄64 in

1U-7574 3⁄32 in

1U-7575 1⁄8 in

1U-7576 5⁄32 in

1U-7577 3⁄16 in

1U-7578 7⁄32 in

1U-7579 1⁄4 in

1U-7580 5⁄16 in

1U-7581 3⁄8 in

1U-7582 7⁄16 in

1U-7583 1⁄2 in

1U-7584 9⁄16 in

1U-7585 5⁄8 in

1U-7632 3⁄4 in

1U-7586 1 in

Hollow Head Screw Hex Wrenches

• Used to remove and install hollow head screws

ID: C33395T1


1 1P-3566 Bit 9⁄16 in9U-7419 Bit 3⁄4 in

2 6V-0115 Wrench 1⁄8 in6V-2104 Wrench 3⁄32 in5P-4205 Wrench 5⁄32 in5P-4206 Wrench 9⁄64 in

Special Large Socket Wrenches

ID: 75995-1T1

Part No. Hex Size Usable Depth1⁄2 inch Drive

4C-6172 1 1.13 in 3.00 in

3B-7012 2.00 in 4.50 in3⁄4 inch Drive

3B-6352 2.63 in 4.50 in

1B-4657 2.75 in 4.50 in

7M-7809 2.88 in 7.25 in

5P-0954 3.00 in 4.50 in

2B-1730 3.39 in 4.50 in

5P-3540 3.50 in 4.50 in

1U-6689 3.50 in 6.30 in

Part No. Hex Size Usable Depth3⁄4 inch Drive (cont’d)

2B-1731 3.63 in 4.50 in

1U-6690 4.00 in 6.30 in

5P-7367 2 4.29 in 1.50 in

125-5723 4.50 in 5.75 in

1U-6691 5.50 in 7.90 in

1U-6692 5.75 in 7.90 in

Bar Turn

9F-9963 1.459 in 8.38 in1 Special for removal of solenoid valves

on countershaft transmissions

2 Octagon

01b.qxp 10/5/06 1:24 PM Page 43


Wrenches / Sockets / Screwdrivers Miscellaneous Hand ToolsH

and

Tool

s

ID: il2, D00701T1

Size Part No. Description3⁄16 6V-7937 Standard5⁄16 6V-7933 Standard3⁄8 6V-7932 Standard

No. 1 6V-7936 Phillips


9U-7290 Screwdriver SetWarranty: Lifetime

• Exclusive high-tech handle design for a more comfortable grip and more powerful performance• Includes a flat 1⁄4 inch tip and #1 Phillips

ID: C79642T1

ID: C79435T1

Lock Removal Socket

• 1⁄2 inch drive

ID: C38083T1

Part No. Size

5P-6587 1⁄2 in Hex

5P-6588 9⁄16 in Hex

5P-6589 3⁄4 in Hex

ID: C09346T1

216-1685 Spark Plug SocketSMCS Code: 1555-010Model: G3516B (50 Hz), G3516B (60 Hz), G3520B (50 Hz), and G3500C

• Thin wall design eliminates possible socket interference• 1⁄2 inch drive, 103 mm overall length, 13⁄16 inch, 6 point hex

ID: C80594T1

4C-4601 Spark Plug Socket

• 7⁄8 inch hex, 1⁄2 inch square drive, 6 point• 103.1 mm (4.06 in) long• Special thin wall for use on G3500 and G3600 Engines

233-1640 Screwdriver Set, 5 PieceWarranty: Lifetime

• Exclusive high-tech handle for a more comfortable grip and more powerful performance

1P-5559 Spark Plug Adapter Wrench2P-5481 Spark Plug WrenchSMCS Code: 1555-011Model: 5.4 inch Bore Natural Gas EnginesWarranty:

• Used to remove spark plugs and adapters on 5.4 inch Bore Natural GasEngines (G342, G353, G379, G398)

• Especially useful because plugs and adapters are deeply recessed in top ofengine

• 1P-5559 Wrench:Large end: 1.25 inSmall end: .75 in

01b.qxp 10/5/06 1:24 PM Page 44


Miscellaneous Hand Tools Screwdrivers / HacksawsH

and Tools

ID: C79643T1

ID: C79461T1

Tip Size Part No. Description1⁄4 6V-7935 Standard3⁄16 6V-7937 Standard5⁄16 6V-7933 Standard3⁄8 6V-7932 Standard



Black Plastic Handled ScrewdriversWarranty: Lifetime

• Nickel/chrome-plated blades with vapor-blasted tips for best possible grip on screws• Heavy duty, high impact handle• Shape of black plastic handle provides the optimum fit to the human hand

ID: C79428T1

ID: C79471T1Phillips Tip, Round Shank Screwdrivers

Tip Size Part No. Length

No. 1 6V-7936 169.2 mm (6.66 in)

No. 2 6V-7934 213.6 mm (8.41 in)

No. 3 214-7342 276.4 mm (10.88 in)

9U-7291 Ratcheting Screwdriver, 5 BitsWarranty: Lifetime

• 222.25 mm (83⁄4 in) long overall; 96.04 mm (325⁄32 in) stainless steel shanklength

• 3⁄16 inch and 9⁄32 inch flat tips, #1 and #2 Phillips, and #2 Pozidriv store inhollow handle

ID: C79424T1

9U-7328 Tool Bit Set, 6 Piece

• Includes #1, #2, and #3 Phillips and 6.5 mm x 1.2 mm, 6.0 mm x 1.0 mm, and 5.5 mm x 0.8 mm flat tips

• High impact, pocket-sized ABS plastic case• Convenient magnetic bit holder (to fit power

drills or for use with the case as a hand-held screwdriver) is included

Hacksaws

ID: C66962T1

Part No. Description Length Use

194-3552 Hacksaw 350.0 mm (13.78 in) for use with 12 inch blade;blade tensioning device inhandle

208-6183 Hacksaw 419.1 mm (16.50 in) for use with 12 inch blade

Replacement Hacksaw Blade SetsPart No. Teeth Material Quantity

1U-9234 12 in-18 Bi-Metal 5

1U-9236 12 in-24 Bi-Metal 10

1U-9238 12 in-32 Bi-Metal 5

1U-9240 12 in-18 High Carbon Steel 5



Standard Tip, Round Shank Screwdrivers

Tip Size Part No. Length1⁄8 in 6V-9124 120.7 mm (4.75 in)1⁄4 in 6V-7938 100.1 mm (3.94 in)1⁄4 in 6V-7935 212.85 mm (8.38 in)3⁄16 in 6V-7937 239.78 mm (9.44 in)5⁄16 in 6V-7933 277.11 mm (10.91 in)3⁄8 in 6V-7932 342.1 mm (13.5 in)1⁄2 in 277-8790 469.0 mm (18.47 in)

162-7804 Black Plastic Handle Screwdriver Set, 6 PieceWarranty: Lifetime

• Black plastic handles• 6-piece set• Includes vinyl pouch

01b.qxp 10/5/06 1:24 PM Page 45


Pry Bars / Hammers Miscellaneous Hand ToolsH

and

Tool

s

ID: C58237T1

Pry Bars

• Flat taper at one end and pointed taper on the other end


1U-7587 Rolling Head Pry Bar 152.4 mm (6.00 in)

194-3553 Rolling Head Pry Bar 304.8 mm (12.00 in)

5F-4764 Rolling Head Pry Bar 406.4 mm (16.00 in)

194-3556 Rolling Head Pry Bar 533.4 mm (21.00 in)

1U-7591 Pry Bar .625 mm x 457.2 mm (.63 in x 18.00 in)

1U-7592 Pry Bar .75 mm x 609.6 mm (.75 in x 24.00 in)

1U-7593 Pry Bar .875 mm x 762 .0 mm (.88 in x 30.00 in)

4F-5166 Pry Bar 762.0 mm (30.00 in)

4C-5742 Long Pry Bar 1168.4 mm (46.00 in)

4C-5647 Long Pry Bar 1371.6 mm (54.00 in)

ID: C54844T1

Handled Pry BarsWarranty: Manufacturer’s

• Black chrome striking cap—hit bar without damage to handle• Available in bar shank lengths of 30, 46, 61, and 91 cm (12, 18, 24, and 36 in)• Ergonomic handle made from a dual durometer composite for user comfort; reduces hand fatigue• Polished tip with black oxide finish• Long-life finish resists rust and wear during use

ID: D00608T1

239-4141

239-4142

239-4143

239-4255

239-4140

239-4141 12 inch Handled Pry Bar, 30 cm (12 in)




239-4140 Handled Pry Bar Kit includes: 239-4141, 239-4142, and 239-4143

Hammers

.ID: C07907T1

Item Part No. Size Height Length Weight

Ball Peen Hammers

1 1S-0257 11⁄8 in 298.5 mm 340 g(11.75 in) (12 oz)

2 1B-7810 15⁄32 in 113.5 mm 406.4 mm 680 g(4.47 in) (16.00 in) (11⁄2 lb)

3 8H-8577 11⁄4 in 128.6 mm 406.4 mm 900 g(5.06 in) (16.00 in) (2 lb)

Soft Face Hammers

4 1S-0258 111⁄16 in 117.5 mm 330.2 mm 900 g(4.63 in) (13.00 in) (2 lb)

5 Replacement Tips for 1S-0258:3S-0460 Medium Tip3S-0459 Hard Tip

Hammer Handles

Part No. Size Material

263-3817 305 mm (12 in) Hickory

263-3819 407 mm (16 in) Hickory

263-3820 458 mm (18 in) Hickory

244-0910 Pry Bar Display

• Eye-catching addition to the sales floor area• Sturdy display measures only 406.4 mm x 457.2 mm

(16 in x 18 in) at the base but it’s 1625.6 mm (64 in) high for extra visual impact

• Holds 1U-7593 (2), 4C-5742 (2), and 4C-5647 (1) Pry Bars

• Pry bars purchased separately

Multiple Use Hammers

ID: D00222T1

Item Part No. Description Face Diameter Overall Length Weight

1 223-1697 Double Face Sledge 47.75 mm (1.88 in) 889.0 mm (35.00 in) 4.36 kg (9.62 lb)

2 223-1694 Dead Blow Sledge 69.85 mm (2.75 in) 508.0 mm (20.00 in) 2.50 kg (5.50 lb)

3 223-1693 Hand Drilling (Short Handle) 38.10 mm (1.50 in) 273.05 mm (10.75 in) 1.82 kg (4.00 lb)

Not shown

223-1698 Double Face Sledge 53.98 mm (2.13 in) 905.0 mm (35.63 in) 4.95 kg (10.92 lb)

245-9823 Double Face Sledge 73.00 mm (2.88 in) 914.0 mm (36.00 in) 7.25 kg (16.00 lb)

223-1695 Dead Blow Sledge 82.55 mm (3.25 in) 914.40 mm (36.00 in) 5.45 kg (12.00 lb)

Hammer Handles

Part No. Size Material

263-3821 762 mm (30 in) Hickory

263-3822 915 mm (36 in) Hickory

01b.qxp 10/5/06 1:24 PM Page 46


Miscellaneous Hand Tools Slide Sledge®H

and Tools

Slide Sledge® Heavy Equipment Repair ToolOne operator can safely and easily maneuver the Slide Sledge Heavy Equipment Repair Tool into hard-to-reach places, simplifying repairs while reducing operator effort.

Slide Sledge is powered by sliding the steel drive bar back and forth, allowing the operator to deliver a precise impact—when and where it’s needed. This eliminates inaccurate sledgehammer swings that can damage machinery.• Eliminates need for special equipment or additional operators• Reduces preventive and unscheduled maintenance hours• Used to remove and install pins on almost any equipment• Cuts through stripped or rusted bolts in seconds• Reaches between ripper teeth for easy removal and installation• Drives seals into place, quickly and easily• Adapts to separator forks for fast, easy changeouts• Promotes a safer work environment—eliminates flying debris associated with hammer

and chisel use• Minimizes operator effort and reduces muscle strain through finger-pressure control• Accommodates interchangeable, application-specific tips that allow one tool to do

the job of many• Adapts to quick-change tips engineered to get the job done faster and easier• Delivers powerful, precise impact; use a 5 lb handle weight for additional impact• Made of induction-hardened steel for long life

ID: D01743T1

ID: D01731T1

Item Part No. Weight Length Description Use

1 272-1208 9 lb 30 in Slide Sledge Heavy Equipment For fitting into tight areasRepair Tool with 272-1237 Pin Driver

2 272-1212 13 lb 46 in Slide Sledge Heavy Equipment Ideal for most standard applicationsRepair Tool with 272-1237 Pin Driver

3 272-1215 14 lb 30 in Slide Sledge Heavy Equipment Larger-diameter allows tool to fit into tight Repair Tool with 272-1237 Pin Driver areas while delivering Biggest Maximum Force

4 272-1218 21 lb 46 in Slide Sledge Heavy Equipment Longer length and greater weight deliver Repair Tool with 272-1237 Pin Driver Biggest Maximum Force for your toughest

applications

01b.qxp 10/5/06 1:24 PM Page 47


Slide Sledge® Miscellaneous Hand ToolsH

and

Tool

s

Accessories

Item Part No. Description Use

1 272-1222 Tie Rod/Ball Joint Separator 3 Tip Set Slide Sledge separator adapter and 11⁄16 in, 15⁄16 in, and 11⁄8 forks

2 272-1223 Tie Rod/Ball Joint Splitter Adapter Attach all Slide Sledge separator forks and most common forks available

3 272-1224 Tie Rod/Ball Joint Separator Fork, 11⁄16 in272-1225 Tie Rod/Ball Joint Separator Fork, 15⁄16 in272-1226 Tie Rod/Ball Joint Separator Fork, 11⁄8 in272-1227 Tie Rod/Ball Joint Separator Fork, 17⁄16 in

4 272-1228 Pin Driver, 1⁄2 in diameter Recommended for pins and bolts greater than 1⁄2 inch up to 7⁄8 inch diameter

5 272-1230 Pin Driver, 7⁄8 in diameter Recommended for pins greater than 7⁄8 inch up to 11⁄4 inch diameter

6 272-1233 Pin Driver, 11⁄4 in diameter Recommended for pins greater than 11⁄4 inch up to 2 inch diameter

7 272-1237 Pin Driver, 2 in diameter Recommended for pins greater than 2 inch up to 21⁄2 inch diameter

8 272-1239 Pin Driver, 21⁄2 in diameter Recommended for pins greater than 21⁄2 inch up to 3 inch diameter

9 272-1240 Pin Driver, 3 in diameter Recommended for pins greater than 3 inch up to 4 inch diameter

10 272-1241 Curved Chisel Tip, 13⁄8 Ideal for chopping away hardened debris and shearing metal bolts, pins, and rivets up to 3⁄8 in, grade 8

11 272-1242 Ripper Tooth Pin Inserter, 3⁄4 in diameter Use on pins as small as 3⁄4 inch up to 1 inch with minimum tooth spacing of 41⁄2 in272-1244 Ripper Tooth Pin Inserter, 1⁄2 in diameter Use on pins as small as 1⁄2 inch up to 3⁄4 inch with minimum tooth spacing of 31⁄2 in272-1247 Ripper Tooth Pin Inserter, 3⁄8 in diameter Use on pins as small as 3⁄8 inch up to 1⁄2 inch with minimum tooth spacing of 23⁄4 in

12 272-1243 Ripper Tooth Pin Remover, 3⁄4 in diameter Use on pins as small as 3⁄4 inch up to 1 inch with minimum tooth spacing of 41⁄2 in272-1245 Ripper Tooth Pin Remover, 1⁄2 in diameter Use on pins as small as 1⁄2 inch up to 3⁄4 inch with minimum tooth spacing of 31⁄2 in272-1246 Ripper Tooth Pin Remover, 3⁄8 in diameter Use on pins as small as 3⁄8 inch up to 1⁄2 inch with minimum tooth spacing of 23⁄4 in

13 272-1249 Race/Bearing/Seal Adapter Adapter driver tip to install races, bearings and seals. Add drive plates to the end of the adapter in variouscombinations. Fits plates with a common 9⁄16 center hole, up to 3⁄4 inch high (plates not included).

14 272-1250 Bushing Driver Adapter Adapter driver tip to properly install bushings easily and quickly. Fits drivers with a common 3⁄4 center hole, up to 7⁄8 inch high (drivers not included).

15 272-1251 Scarifier Tooth Tip Removes scarifier teeth on most motor graders. The fork design allows the technician to split the trenching armwhere the scarifier tooth is forced to fit.

16 272-1252 Utility Wedge Tip All-purpose impact tool designed to separate parts and straighten steel with maximum force

17 272-1253 5 Pound Handle Weight Increases the Slide Sledge striking force by 5 lbs; works with any of the four tools by threading onto tool handle

Not shown

272-1248 Bushing/Bearing/Seal Plate Driver Use with Caterpillar plates (not included)

287-2075 Small Tire Bead Breaker, 21⁄4 in head width Most standard applications

287-2076 Large Tire Bead Breaker, 27⁄8 in head width Ideal for tractor trailers, backhoes, motor graders, and other large equipment

Tool Bags and Case


273-3527 Heavy Nylon Tool Bag with Interior Pockets 38 in long

273-3528 Heavy Nylon Tool Bag with Interior Pockets 52 in long

Not shown

273-3529 Hard Shell Tool Case with Custom Foam and Wheels 53 x 14 in

ID: D01725T1

ID: D01737T1

01b.qxp 10/5/06 1:24 PM Page 48


Miscellaneous Hand Tools Shovels and Spades / Levels / TapesH

and Tools

Shovels and SpadesWarranty: Manufacturer’s

• Ergonomically engineered for balance and safety• Latest technology fiberglass handles• Super-duty, pultruded core with reinforcement sections adds strength• Molded-exterior, polymer clad jacket for handling comfort

ID: C79833T1


1 157-2264 Shovel, Round Point with 122 cm (48 in) long handle

2 157-2276 Spade, Drain with 122 cm (48 in) long handle

3 157-2268 Shovel, Square with 122 cm (48 in) long handle

4 157-2273 Scoop, #12 Aluminum

5 157-2278 Spade, Drain with 69 cm (27 in) “D” handle

6 157-2269 Shovel, Square Point with 69 cm (27 in) “D” handle

7 157-2266 Shovel, Round Point with 69 cm (27 in) “D” handle

ID: C79644T1

ID: C33497T1

ID: D00695T1

Blade Length Blade Length Graduations Graduations LockingPart No. Blade Width in Feet in Meters in English in Metric Feature

5P-3277 12.7 mm (1⁄2 in) 10 3 1 in, 1⁄10 in 1.0 cm, 1.0 mm Yes

1U-9366 19.05 mm (3⁄4 in) 16 5 1 in, 1⁄16 in 1.0 cm, 1.0 mm Yes

1U-9367 25.4 mm (1 in) 26 8 1 in, 1⁄16 in 1.0 cm, 1.0 mm Yes

1U-9368 25.4 mm (1 in) 30 9 1 ft, 1 in, 1⁄16 in — Yes

232-5041 25.4 mm (1 in) 26 8 1 ft, 1 in, 1⁄16 in 1.0 cm, 1.0 mm Yes

Tape MeasuresWarranty: Manufacturer’s

9U-7327 Tape Measure, 1⁄2 inch x 10 ft• Can read dimensions directly on the tape by looking in a see-through window• Great for inside measurements such as window dimensions• Readings in mm and inches

9U-7326 Tape Measure, 1⁄4 inch x 6 ft• Black ABS-encased steel tape• Slim and contemporary—fits easily in your pocket• Has auto stop and return• Readings in mm and inches

9U-7329 Universal LevelWarranty: Manufacturer’s

• Made of high-impact ABS• Has two easy-to-read Plexiglas vials, one a vertical angle dial adjustable

from 0° to 180°• Includes a clear plastic gift box

ID: C70205T1

Automatic Power Tapes

5P-3277, 1U-9366, 1U-9367, and 1U-9368• 2-color• Handsome, chrome-finished case• Removable belt clip

232-5041• Ergonomically designed• Magnetic tip holds tape in place and makes long distance measuring much easier• Yellow and black plastic

01b.qxp 10/5/06 1:24 PM Page 49


Tapes / Gauges / Magnets / Pipe Wrenches Miscellaneous Hand ToolsH

and

Tool

s

Steel Tape

• Heavy-duty vinyl covered welded steel case• Yellow coated 3⁄8 inch wide blade, 2-color markings, folded steel hook, folding handle• Graduation — inches in black; feet and 16 inch centers in red, meters in black, centimeters and millimeters in red• English on one side, metric on the other side

ID: C79429T1

Blade BladeBlade Length Length Graduations Graduations

Part No. Width Feet Meters English Metric

1U-9369 3⁄8 in 50 15 1 ft 1 in, 1⁄16 in 1.0 m, 1.0 cm, 1.0 mm

4C-8733 Taper Gauge

• Used to quickly and conveniently measure openings for shim packs orspacers

• Used in place of thickness gauges• Made of quality tool steel• One side graduated in inches, other side in millimeters• Size: 6.20 in x .40 in (160.0 mm x 11.0 mm)

ID: C66613T1

.150 IN..140.130 No.270.120.110.100.090.080.070.060.050.040.030.020.010

4 6 8 1 2 4 6 8 2 2 4 6 8 3 2 4 6 8 4MM

9U-7289 Stainless Steel Pocket ScaleWarranty: Lifetime

• Shows millimeters and inches on one side• Only 61⁄4 inch long and 1⁄2 inch wide• Has a convenient pocket clip

ID: C79602T1

4C-9798 Block Magnet

• Measures or checks for straight line dimensions on any large, steel structure using magnet restrained string lines

• Fast, economical means of simplifying inspection of large steel structures for alignment, position, parallelism, dimensional accuracy

• Strong enough to hold a tight string over a steel structure• Magnets can be stacked to obtain string clearance with structure features• String not included• Dimensions: 25.0 mm x 25.0 mm x 50.0 mm (1.00 in x 1.00 in x 2.00 in)• Weight: 0.166 kg (0.366 lbs)

ID: C68824T1

Aluminum Pipe Wrenches

• 10 inch through 24 inch• 35% lighter than cast iron wrenches• Heat treated titanium — aluminum alloy handle• Forged hook jaw• Heat-treated alloy steel parts interchangeable with iron wrenches

ID: C41211T1Item Part No. Description Pipe Capacity Length

1 4C-6974 Aluminum Wrench 14.0 mm - 63.0 mm (.25 in - 2.00 in) 356.0 mm (14.00 in)

2 4C-6975 Aluminum Wrench 14.0 mm - 75.0 mm (.25 in - 2.50 in) 457.0 mm (18.00 in)

3 4C-6976 Aluminum Wrench 14.0 mm - 90.0 mm (1.25 in - 3.00 in) 610.0 mm (24.00 in)

Not shown 4C-6973 Aluminum Wrench 10.0 mm - 48.0 mm (.13 in - 1.50 in) 254.0 mm (10.00 in)

01b.qxp 10/5/06 1:24 PM Page 50


Miscellaneous Hand Tools Pipe Wrenches / Cutters / PliersH

and Tools

Heavy-Duty Pipe Wrenches

• High-tensile ductile iron handle and hardened tool-steel parts• Designed to withstand heavy demands

ID: C41210T1

Part No. Pipe Capacity Length Weight

4C-6962 10.0 mm - 48 .0mm (.13 in - 1.50 in) 254.0 mm (10.00 in) 5.4 kg (12 lb)

4C-6963 10.0 mm - 60.0 mm (.13 in - 2.00 in) 305.0 mm (12.00 in) 8.1 kg (18 lb)




Quick Release Tubing Cutters

• Offer the best tracking and easiest cutting available anywhere• Cut copper, aluminum and steel tubing (not steel pipe)• With a quick wheel change, they also cut a wide variety of plastic pipe and tubing

ID: C41209T1

Wheel for Copper, Wheel for Item Part No. O.D. Capacity Length Weight Aluminum, Brass, Steel Stainless Steel

1 4C-6977 3.0 mm - 33.0 mm (.13 in - 1.31 in) 152.0 mm (6.00 in) 0.2 kg (.5 lb) 4C-6980 4C-6981

2 4C-6978 6.0 mm - 60.0 mm (.25 in - 2.63 in) 203.0 mm (8.00 in) 0.5 kg (1.25 lb) 4C-6980 4C-6981

3 4C-6979 10.0 mm - 90.0 mm (.38 in - 3.50 in) 279.0 mm (11.00 in) 1.1 kg (2.5 lb) 4C-6982 —

233-1639 Yellow Grip Pliers Set, 3 PieceWarranty: Lifetime

• Hardened cutting edges stay sharper longer and cut with less effort• Machined cutter heads for matched blades• Black oxide finish• Vinyl grip

Part No. Description Length

6V-6192 Combination Pliers 190.5 mm (7.50 in)

6V-6193 Diagonal Cutter Pliers 185.7 mm (7.30 in)


Combination and Multiple Position PliersWarranty: Lifetime

ID: D00505T1

Type Part No. Description Length Finish Vinyl Grip

A 6V-6192 Combination Pliers 190.5 mm (7.50 in) Black Oxide Yes

A 213-1983 Combination Pliers 159.3 mm (6.30 in) Chrome Yes

A 1S-0255 Combination Pliers 163.5 mm (6.40in) Chrome No

B 214-7347 Multiple Position Pliers 304.8 mm (12.00 in) Chrome Yes

B 6V-6195 Multiple Position Pliers 235.0 mm (9.30 in) Black Oxide Yes

B 236-1169 Multiple Position Pliers 400.0 mm (16.0 in) Chrome Yes

C 6V-6194 Needle Nose Pliers 181.1 mm (7.13 in) Black Oxide Yes

D 6V-6193 Diagonal Cutter Pliers 185.7 mm (7.30 in) Black Oxide Yes

Not shown

212-3607 End Cutter Pliers 187.3 mm (7.40 in) Black Oxide Yes

8H-8582 Vise Grip, Straight Jaw 250.0 mm (9.80 in) Chrome No

214-7348 Vise Grip, Curved Jaw 250.0 mm (9.80 in) Chrome No

246-5128 Locking Pliers, Straight Jaw 127.0 mm (5.00 in) Black/Yellow No

246-5129 Locking Pliers, Curved Jaw 177.8 mm (7.00 in) Black/Yellow No

246-5131 Locking Pliers, Long Rounded Jaw 254.0 mm (10.00 in) Black/Yellow No

246-5132 Locking Pliers, Curved Jaw w/cotter 254.0 mm (10.00 in) Black Yellow No

246-5133 Locking Pliers, Straight Jaw 254.0 mm (10.00 in) Black Yellow No

246-5134 Locking Pliers Set, 5 piece

236-1169 Multiple Position Pliers 400.0 mm (16.00 in) Chrome Yes

01b.qxp 10/5/06 1:24 PM Page 51


Pliers / Punches Miscellaneous Hand ToolsH

and

Tool

s

ID: D00416T1

ID: B83786T1

ID: C33478T1

227-3129 Drift Punch Set, 5 PieceWarranty: See individual part number

• Replaces discontinued 1U-7260 Drift Punch Set, 5 Piece

• Material: high carbon steel• Individually heat treated

for uniform hardness• Includes pouch

Part No. Point Size Length

227-3130 1⁄8 in 229 mm (9.0 in)

227-3131 3⁄16 in 279 mm (11.0 in)

227-3132 7⁄32 in 305 mm (12.0 in)

227-3133 1⁄4 in 305 mm (12.0 in)

227-3134 5⁄16 in 305 mm (12.0 in)

ID: A54965-1T1

Retaining Ring Pliers

ID: C05333T1

Item Part No. Tip Size Type

1 1P-1863 (No. 26) 0.12 in External

2 1P-1861 (No. 25) 0.09 in Internal

3 1P-1857 (No. 23) 0.07 in Internal

4 1P-1855 (No. 22) 0.04 in External

5 1P-1859 (No. 24) 0.07 in External

6 1P-1853 (No. 21) 0.04 in Internal

ID: C07899T1

Item Part No. Tip Size Type

1 1P-1864 (No. 26-90) 0.12 in External

2 1P-1862 (No. 25-90) 0.09 in Internal

3 1P-1858 (No. 23-90) 0.07 in Internal

4 1P-1856 (No. 22-90) 0.04 in External

5 1P-1860 (No. 24-90) 0.07 in External

6 1P-1854 (No. 21-90) 0.04 in Internal

5P-5197 External Pliers

• Use to compress or expand large retaining rings• A double ratchet locks to hold the handles at any given point

without hand pressure• Gap between the plier tips ranges from 12.7 mm (.50 in) fully closed to 76.0 mm (3.00 in) fully open


1 5P-5197 External Pliers

2 136-1452 Internal Pliers

3 1U-6728 Tip Set

4 1U-6728 Tip Set

Not shown 6V-2062 Tip Set, 90°(Used for 5P-5197)

1U-8758 Internal Retaining Ring Pliers

• Used to remove and install the large internal retaining rings in power shifttransmissions

• Overall length: 29.00 in (737.0 mm)• Double ratchet lock• Pliers include 0.15 in (3.8 mm) diameter tips• Service Part: 1U-8759 Replacement

Tips (2 per package)

2P-8312 External Retaining Ring Pliers

• Used to remove and install tempered steel retaining rings used in many applications

• Right angle tips to provide the necessary clearance where the lock ring is accessible only from a perpendicular position

226-1900 Pin Punch Set, 7 Piece Warranty: See individual part number

• Replaces discontinued 1U-7250 Pin Punch Set, 7 Piece

• Individually heat treated for uniform hardness

• Includes pouch

ID: D00417 T1

Part No. Point Size Length

226-1901 1⁄16 in 102 mm (4.0 in)

226-1902 3⁄32 in 114 mm (4.5 in)

226-1903 1⁄8 in 127 mm (5.0 in)

226-1904 5⁄32 in 140 mm (5.5 in)

226-1905 3⁄16 in 140 mm (5.5 in)

226-1906 7⁄32 in 178 mm (7.0 in)

226-1907 1⁄4 in 178 mm (7.0 in)

01b.qxp 10/5/06 1:24 PM Page 52


Miscellaneous Hand Tools Punches / Chisels / GaugesH

and Tools

ID: C33543T1


1 1U-7234 Feeler Gauge, 25 Blade, .0015 in-.040 in

2 8H-8581 Feeler Gauge, 25 Blade, .0015 in-.025 in

Not shown 1B-9660 Valve Clearance Gauge, 6 Blade, .005 in-.010 in

ID: C07888T1

ID: D00527T1

227-3795 Chisel Group, 5 PieceWarranty: See individual part number

• Individually heat-treated for uniform hardness• Resharpened and polished after blasting

for a sharper cutting edge• Includes pouch

ID: D00369T1

Service Parts

Part No. Punch Size Length

227-3796 5⁄16 inch 114.3 mm (4.50 in)

227-3797 3⁄8 inch 127.0 mm (5.00 in)

227-3798 7⁄16 inch 139.7 mm (5.50 in)

227-3799 1⁄2 inch 146.1 mm (5.75 in)

227-3800 5⁄8 inch 152.4 mm (6.00 in)

Individual Chisels and Punch Pieces

• Hot-formed from fine alloy steel and heat treated for maximum hardness — they hold their edges and points

PunchItem Part No. Size Length Type

1 8H-8578 3⁄8 in 241.3 mm (9.50 in) Punch

2 1F-1161 3⁄4 in 177.8 mm (7.00 in) Cold Chisel

3 1F-1159 3⁄16 in 152.4 mm (6.00 in) Center Punch

Not shown

8H-8579 5⁄32 in 203.2 mm (8 .00in) Punch

1F-1160 13⁄32 in 139.7 mm (5.50 in) Cold Chisel

1U-7296 3⁄16 in 158.8 mm (6.25 in) Center Punch

8T-0832 1⁄4 in 142.7 mm (5.63 in) Cape Chisel

165-3977 4.95 mm 154 mm (6.06 in) Radius Punch

Rivet Sets• Available for either “Star” set rivets or “Roll” set rivets• “Star” set rivets, identified by a star stamped in the head,

should be used only where the clinching is done against a non-metallic surface. To form a good clinch, there should be approximately 3⁄16 inch of rivet extension before the rivet is set.

• “Roll” set rivets, marked with a circle on the head, should be used when clinching is done against metal. To form a good clinch, there should be approximately 1⁄8 inch of rivet extension before the rivet is set.


1 1P-2874 Roll Set (for 1⁄4 in rivets)

2 6F-6947 Star Set

3 6F-6946 Roll Set (for 3⁄16 in rivets)6V-7013 Roll Set (for 5⁄32 in rivets)

129-1063 Riveter KitSMCS Code: 4054Model: M312 Wheeled Excavators

• Used for miscellaneous repairs requiring rivets• Comes with three different nose pieces• Overall length: 53.0 cm (21.0 in)

ID: C78585T1

Feeler Gauges

ID: C80131T1

CLEARANCE RANGE .001 TO .003 INCH .001 TO .003 INCH CLE USE HPR-1 (RED) FOR .002 TO .006 INCHUSE HPB-1 (BLUE) FOR .004 TO .009 INCH

USE HPR-1 (RED) FOR .002 TO .006 INUSE HPB-1 (BLUE) FOR .004 TO .009 I

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

in.001

.0015

.002.003

ID: C80135T1

O .0

03 IN

CH

U

SE

HP

R-1

(R

ED

) U

SE

HP

B-1

(B

LUE

) F

in

.001

.0015

.002

.003

in

.001

.0015

.002

.003

Crushed material indicates a (.001 in) clearance

Plastic Gauges for Checking Clearance SMCS Code: 1000-082, 0700, 0701, 0714Model: All Engines or Clearance Between Any Mating Parts

• Used to quickly and easily check clearance between mating parts (main rod and bearing clearance, component side clearance, oil pump cover to gear clearance, etc.)

• Plastigage clearance indicator is an extruded plastic thread that crushes when clamped between two mating parts

• Available in four color-coded sizes for easy identification• Clearance thickness is determined by holding

crushed indicator material against paper packaging (refer to illustration)• Any plastic residue on parts can be quickly removed with component cleaner• One indicator per package• Overall length: 30.0 cm (12.00 in)

Part No. Color Clearance Range

198-9142 Green 0.025 to 0.076 mm (.001 to .003 in)

198-9143 Red 0.051 to 0.152 mm (.002 to .006 in)

198-9144 Blue 0.102 to 0.229 mm (.004 to .009 in)

198-9145 Yellow 0.230 to 0.510 mm (.009 to .020 in)

01b.qxp 10/5/06 1:24 PM Page 53


Miscellaneous Miscellaneous Hand ToolsH

and

Tool

s

ID: C27161T1

ID: C79485T1

Cab Glass Installation Tools

• For installing the filler strips around the glass in cabs

ID: C79433T1


4C-9946 Filler Strip Tool Assembly

5H-4845 Seal Installation Tool Assembly

5H-4846 Handle

5H-4847 End

5H-4848 Bit

5P-1720 Seal Pick5P-7414 Seal Pick Kit

5P-1720• Used to remove and install all types of oil seals• One end of pick is pointed for prying out flexible seals• Blunt, hook end is used to align seals for installation and to eliminate the twist

that occurs when installing O-ring or quad-ring seals• Both ends of the pick are hardened and provide much greater strength than would

normally be expected from a tool this size

ID: C80219T1

5P-7414

5P-1720

Utility Knife and Blades

• “Slick lock” push-button knife that includes 2 blades stored in the handle

Retrieval Tools

ID: C79431T1


1 1U-7262 Telescoping Magnet

2 146-2728 Flexible Pickup Tool

Putty Knife/Scraper

ID: C80225T1


8H-8580 Scraper 38.1 mm (1.50 in) wide

Filter and Plug Removal and Installation Tools

• Used to remove and install drain and fill plugs

• Most hexagonal plugs can also be removed and installed using the 213-1985 Sliding T-Handle and 8H-8561 Socket


1 1S-2475 Wrench, 3⁄4 in square

2 8H-8559 Extension, 1⁄2 in drive, 279.0 mm (11.00 in) long

3 213-1985 Sliding T-Handle, 1⁄2 in drive

4 212-8145 Plug Socket, 1⁄2 in Female, 3⁄4 in Male

5 212-8146 Drain Plug Socket, 1⁄2 in Female, 1 in and 11⁄2 in Hex

6 261-0444 Plug Socket, 1⁄2 in Female, 3⁄8 in square. Male

7 185-3630 Strap Wrench Assembly

ID: C79918T1

195-4609 Seal PickModel: All Hydraulic Cylinders

• Used to remove cylinder rod seals• Large size allows faster and easier removal

of seals from large hydraulic cylinders• Heavy-duty design• Overall length:

248.0 mm (9.80 in)

4C-4870 Utility Knife

Length 152.4 mm (6 in)

4C-4871 Utility Knife Blades

Thickness 0.635 mm (0.025 in)

Quantity 100 blades per box

01b.qxp 10/5/06 1:24 PM Page 54


Miscellaneous Hand Tools BrushesH

and Tools

ID: C33464T1

Scratch Brushes

• Hand scratch brushes are excellent for removing rust, scale, old paint, chips and dirt, and for cleaning castings and metal parts

• Provide long, effective service at extremely low cost


1U-9915 Curved Handle Brush .014 in (3 x 19 Row)

1U-9916 Curved Handle Brush .012 in (4 x 19 Row)

1U-9917 Shoe Handle Brush .014 in (4 x 16 Row)

1U-9918 Inspection Stainless Brush .006 in (3 x 7 Row)

ID: C79258T1

160-0774 Corner Cleaner Wire Brush

• Quickly removes flaking paint, rust, and scale• Handy small size with pointed end works well in hard to reach areas• Full size handle with finger grips and thumb rest provides added control and

comfort• Made of tough polypropylene• Overall length: 254.0 mm (10.00 in)

160-0772 Longneck Wire Brush

• Excellent for removing rust, scale, old paint, chips, or dirt• Unique wrap-around handle protects your fingers• Full size handle and molded finger grips add control and reduce fatigue• Over 80 yards of wire for maximum performance• Made of tough polypropylene• Heavy-duty steel scraper has a baked-on, rust resistant finish• Scraper is permanently secured to brush• Scraper width: 76.2 mm (3.00 in)• Overall length: 330.2 mm (13.00 in)

ID: C79255T1

160-0775 Industrial Wire Scrubber

• Quickly removes flaking paint, rust, and scale• Dual grip design reduces fatigue — grasp either the handle or specially molded block• Made of tough polypropylene• Overall length: 177.8 mm (7.00 in)

ID: C79259T1

01b.qxp 10/5/06 1:24 PM Page 55

ID: C80382T1


1 190-1668 Coupler

2 190-1669 Hose Assembly, 12 in long

Not shown 190-5623 Hose Assembly, 18 in long (optional)

Maximum operating pressure of assembly 68,948 kPa (10,000 PSI)

ID: C80385T1


Brushes / Grease Guns Miscellaneous Hand ToolsH

and

Tool

s

Parts Cleaning Brushes

ID: C44013T1

Wire WireItem Part No. Description Size Row

1 1U-9920 11 in O.A.L. Size #10 Black Polypropylene

2 1U-9919 11 in O.A.L. Size #10 Tampico

3 1U-9922 11 in O.A.L. Size #10 Unitized

4 2B-4317 103⁄4 in O.A.L. Paint Style Black Nylon11⁄2 in

Paint Brushes

• Use with interior or exterior paints, stains, varnishes, and urethanes• Quantity: one box of 12 brushes

ID: D01215T1Part No. Size (w x l) Material

262-9749 25 mm x 178 mm (1 in x 7 in) nylon brush, metal ferrule, plastic handle

262-9750 51 mm x 203 mm (2 in x 8 in) nylon brush, metal ferrule, plastic handle

262-9752 76 mm x 203 mm (3 in x 8 in) hog bristle brush, metal ferrule, wood handle

Acid Brushes

• Genuine horsehair bristles, crimped with flat tin handle• Chemical resistant handle

ID: C33487T1


1U-9977 Acid Brush 3⁄8 in



1U-9921 Battery Post Brush

• Stiff wire bristles thoroughly clean posts

ID: C79612T1

8F-9866 Lever Grease Gun, Model Pro “L”190-5622 Pistol Grip Grease Gun

• Heavy-duty construction• Cast iron head equipped with a check

valve and an air-bleed valve• Spring primed• Two way loading• Uses standard Cat Grease

cartridges (14.5 oz)• Lever gun will operate with

partial lever strokes for use in close quarters• Zinc plated• Cat branded

ReferenceNEHS0793 Tool Operating Manual


1 190-1668 Coupler

2 190-5623 Hose Assembly, 18 in long

Not shown 190-1669 Hose Assembly, 12 in long (optional)

Maximum operating pressure of assembly 31,026 kPa (4,500 PSI)

Service Parts for Noncurrent 8F-9866(This model is not marked Pro “L” and uses the 2M-2689

or 190-1670 Coupler with a check valve.)


190-1670 Coupler (valve with steel insert)

2M-2689 Coupler (valve with rubber insert)

9F-2689 Nozzle Assembly

9F-2638 Hose Assembly (part of 9F-2636)

9F-2637 Nipple (part of 9F-2636)

01b.qxp 10/5/06 1:24 PM Page 56


Miscellaneous Hand Tools Grease GunsH

and Tools

241-0706 Grease Gun Group with 2 batteries194-3560 Grease Gun Group with 1 battery194-3561 Battery, RechargeableWarranty: Manufacturer’s

• 12 Volt cordless, rechargeable grease gun• Custom carrying case holds grease gun with battery, battery charger, and two grease

cartridges (grease not included)• 12 Volt motor delivers consistent grease flow up to 41368 kPa (6000 PSI)• Works great in construction and agricultural field conditions• Provides faster, more effective lubrication (reduces mechanic’s fatigue when lubricating

large numbers of grease fittings)• Three-way loading to fit your needs and equipment (suction, filler pump, and cartridge)• Uses standard 14 ounce cartridges• Comes with a 76 cm (30.0 in) flex hose with spring guards• One hour “fast charge” charges batteries quickly; trickle charge keeps batteries fully charged

when placed in charger• Replacement or additional 194-3561 Batteries can be ordered separately

Motor 12 Volt

Battery high-capacity, 12 Volt NiCad

Pressure capacity 41368 kPa (6000 PSI)

Charge time 1 hour (110 V, 60 Hz)

Front outlet fitting 7⁄16 inch UNEF

Filler nipple thread 1⁄8 inch NPT

Lubricating capacity 3 cartridges minimum (under normal conditions)

Battery capacity 1300 m-A hour

Battery charger 110 Volt

ID: C79964T1


1 Grease Gun

2 Battery charger

3 Carrying case

4 194-3561 Rechargeable Battery

5 207-2736 Hose Assembly, 762 mm (30 in)

01b.qxp 10/5/06 1:24 PM Page 57

Han

d To

ols


Torque Range Drive Part Increments Follow-Up LightMetric U.S. SIze No. Accuracy Metric U.S. Length Needle Indicator Case

800 N·m 600 ft-lb 3⁄4 in 9U-5014 ±4% 20 N·m 10 ft-lb 118.11 cm — Yes Yes(46.5 in)

480 N·m 350 ft-lb 3⁄4 in 9U-5015 ±4% 10 N·m 10 ft-lb 70.61 cm — Yes Yes(27.8 in)

240 N·m 175 ft-lb 1⁄2 in 9U-5016 ±4% 5 N·m 5 ft-lb 54.61 cm Yes — Yes(21.5 in)

35 N·m 300 in-lb 3⁄8 in 9U-5017 ±4% 1 N·m 5 in-lb 25.4 cm Yes — Yes(10.0 in)

800 N·m 600 ft-lb 3⁄4 in 9S-7351 ±2% 20 N·m 10 ft-lb 103.9 cm — Yes(40.9 in)

480 N·m 350 ft-lb 3⁄4 in 9S-7352 ±2% 10 N·m 5 ft-lb 75.9 cm Yes —(29.9 in)

230 N·m 175 ft-lb 1⁄2 in 9S-7353 ±2% 10 N·m 2.5 ft-lb 47.62 cm Yes —(18.75 in)

34 N·m 300 in-lb 3⁄8 in 9S-7354 ±2% 1N·m 5 in-lb 25.2 cm Yes —(9.9 in)

ID: C80440T1

ID: C80471T1

Style B• Work in both right and left-hand (clockwise and counter-clockwise) directions• Micrometer handle style adjustment• These wrenches are labeled in both ft-lbs and N·m

Click Type Torque Wrenches

Torque Wrenches

ID: C44283T1

Dial Type Torque Wrenches

• Accuracy within 2% of the reading within the upper 80% of the scale

• Wrenches with follow-up needle use two pointers on the dial which move as one as long as pressure is applied and one remains at the maximum torque reading until reset

• Wrenches with light indicator features a light which comes on when the torque setting is reached• Work in both right and left-hand (clockwise and counter-clockwise) directions

ID: A38085-1T1

Click Type and Dial Type Torque Wrenches Torque Wrenches

Torque Range Drive Part Accu- Incre- Head Head ServiceStyle Min. Max. Size No. racy Headstyle ments Length Width Depth Case Kit

A 40 ft-lb 252 ft-lb 1⁄2 in 8T-9293 ±6% Flex-Ratchet 5 ft-lb 561.97 mm 41.27 mm 19.05 mm Yes 5P-7429 1(221⁄8 in) (15⁄8 in) (3⁄4 in) 260-3765 2

A 200 ft-lb 600 ft-lb 3⁄4 in 162-8718 ±6% Detach-Ratchet 10 ft-lb 1219.2 mm 60.32 mm 31.75 mm — 160-6390 1(48 in) (23⁄8 in) (11⁄4 in) 260-3766 2

A 20 ft-lb 100 ft-lb 3⁄8 in 4C-5492 ±6% Flex-Ratchet 2 ft-lb 447.67 mm 28.57 mm 14.28 mm Yes 4C-5819 1(175⁄8 in) (11⁄8 in) (9⁄16 in) 260-3764 2

B 6.8 N·m 101.8 N·m 3⁄8 in 9U-5019 ±6% Fixed Ratchet .7 N·m 393.7 mm Yes(5 ft-lb) (75 ft-lb) (0.5 ft-lb) (15.5 in)

B 13.6 N·m 135.7 N·m 3⁄8 in 9U-5020 ±6% Fixed Ratchet .7 N·m 393.7 mm Yes(10 ft-lb) (100 ft-lb) (0.5 ft-lb) (15.5 in)

B 27.1 N·m 203.6 N·m 1⁄2 in 214-7349 ±6% Fixed Ratchet 1.4 N·m 469.9 mm Yes 214-7350(20 ft-lb) (150 ft-lb) (1 ft-lb) (18.5 in)

B 40.7 N·m 339.3 N·m 1⁄2 in 9U-5006 ±6% Fixed Ratchet 1.4 N·m 539.6 mm Yes(30 ft-lb) (250 ft-lb) (1 ft-lb) (21.25 in)

B 135.7 N·m 814.2 N·m 3⁄4 in 9U-5007 ±6% Fixed Ratchet 7 N·m 1092.2 mm Yes(100 ft-lb) (600 ft-lb) (5 ft-lb) (45 in)

1 Service Kit for ratchets that have brand on the head2 Service Kit for ratchets that do not have brand on the head

Style A• Work only in the right-hand or clockwise direction, and are guaranteed

to be accurate within 4% of setting of the top 80% of the scale• Easily adjusted by a small calibrated dial along the wrench arm• Eliminates the need to reduce the

torque setting to the low end of the scale for storage in order to retain accuracy

• The 162-8718 Torque Wrench can be disassembled into three components for storage in a tool box

01c.qxp 10/5/06 1:25 PM Page 58

ID: B64023-1T1

ID: B99650T1

Heavy-Duty Box Wrenches

Straight/Part No. Hex Size Config. Offset Torque

6V-4165 19 mm 12 pt straight 650 ft/lbs

262-2758 20 mm 12 pt straight 650 ft/lbs

4C-9563 24 mm 12 pt straight 650 ft/lbs

262-2759 30 mm 12 pt straight 650 ft/lbs

4C-9565 36 mm 12 pt straight 650 ft/lbs

9U-7375 46 mm 12 pt offset 1000 ft/lbs

9U-5612 55 mm 12 pt offset 1000 ft/lbs

6V-4166 7⁄8 in 12 pt straight 650 ft/lbs


6V-4171 15⁄16 in 12 pt 15° offset —





6V-3146 Tubular Extension

6V-4170 Adapter, 3⁄4 inch, Sq. Drive

Adapters and Extensions for Torque Wrenches

• The 8S-5131, 1P-2382, 5P-4773, and 9S-6330 Adapters are used with the 9S-7353 or 9U-5014 Torque Wrench

• The 8F-4677 Extension and 8F-4678 Adapter are used with the 9S-7352 or 9U-5015 Wrench to increase the capacity of the wrench

ID: A48088-2T1Part No. Description Use

9S-6330 Adapter (1⁄2 inch Drive, 9⁄16 inch 12 Point Box End) for 9⁄16 inch head universal joint bolts in earlier 992 Wheel Loaders.

8S-5131 Adapter (1⁄2 inch Drive, 7⁄8 inch 12 Point Box End) for front left main bearing cap bolt on 1100 and 3100 Series Engines.

1P-2382 Adapter (1⁄2 inch Drive, 3⁄4 inch 12 Point Box End) for universal joint bolts on all tractor-scrapers (except 613) and No. 16 Motor Graders.

5P-0166 Crowfoot Wrench (3⁄8 inch Drive, 3⁄4 inch Hex) for torquing fuel line nuts on D3 Tractors, 910 Wheel Loaders and 931 Track Loaders.

8F-4678 Adapter Driver (3⁄4 inch Drive) for use with 8F-4677 Extension.

8F-4677 Extension, 3⁄4 inch Drive, 267⁄8 inch center to center use to double capacity of 8F-4675 and 9S-7352 Torque Wrenchs for torque applications up to 700 ft.lb.

5P-4773 Adapter (1⁄2 inch Drive, 5⁄8 inch 12 Point Box End) for 5⁄8 inch head universal joint bolts in later 992

Not Shown

9U-5932 Camshaft Torque Extension 3600 Engines

8T-3196 Offset Box Wrench (3⁄4 inch Drive, 17⁄8 inch Hex, 12 pt)

9U-6282 Crankshaft Main Bearing on 3054 and 3056 Engines. 1⁄2 inch Sq. Drive, 15⁄16 inch Hex, 12 pt

156-2568 Adapter, 3⁄8 inch drive, 10 mm, 12 point box end

Special Torque Wrench Extensions

• Extensions listed below are used with the 6V-9452 Adapter, 6V-9451 Tubular Arm, and the 9S-7352 Torque Wrench primarily for applications up to 1000 ft-lb (1360 N·m)

• The Torque Computer, Form SEHS7150, can be used to compute the correct torque wrench reading for proper torque application at the fastener

Part No. Description Use

6V-9452 Adapter, 3⁄4 inch Drive

6V-9451 Tubular Arm

6V-9453 Wrench, 23⁄16 inch Tighten retaining nut for lower vertical hitch pin on 613 Tractor-Scrapers.

6V-9454 Wrench, 17⁄8 inch Tighten mounting stud nuts on 55, 56, 57, 58 and 59 Towing Winches.

6V-9456 Wrench, 111⁄16 inch Tighten steering cylinder tie rod bolt nut on No. 16G Motor Graders.

6V-9455 Wrench, 17⁄8 inch Tighten mounting stud nuts on 55 and 56 Towing Winches

9U-7375 (not shown) Wrench 46 mm (113⁄16 in) Offset — 40 mm (1.56 in) Remove and install rear axle housing, pivot joint cap bolts on 789 and 793


Torque Wrenches ExtensionsH

and Tools

Torque Wrench Extensions

• Used for fasteners in inaccessible places, such as track roller guard bolts, where a torque wrench and standard socket cannot be used

• Has an effective length of 610 mm (24 in) and a capacity up to 884 N·m (650 ft-lb)• A slide rule type torque computer, Form SEHS7150, is available to determine the torque wrench

dial reading for different extensions

01c.qxp 10/5/06 1:25 PM Page 59

ID: B51998T1

8T-3052 Degree Wheel

• Used for measuring torque turn angles• The nut or bolt does not have to be marked in order to obtain the correct torque• 1⁄2 inch drive and can be used with any standard 1⁄2 inch drive socket

ID: C07589T1

ID: B19963T1

ID: D00374T1

206-8796 Torque Multiplier• Used to apply torque greater than capability of torque wrench with an accuracy of ±5%• Specifically used to install and remove counterweight bolts on 5230B Front Shovels or other similar applications• Designed for use with 1 inch square drive torque wrench• Provides 360° continuous rotation in both directions• Built-in, angle-of-turn protractor measures angle of rotation in 5° increments for torque turn specifications• Overload protection is provided by square output drive which shears at a torque slightly above maximum

output rating• Decals located on multiplier provide torque input and output values

ReferencesRENR3379 Service Manual, Disassembly and Assembly

Square drive (input) 1 inch

Square drive (output) 11⁄2 inch

Power ratio 4.33 to 1

Rated input capacity 1,470 N·m (1,081 ft-lb)

Maximum output capacity 5,440 N·m (4,000 ft-lb)

Overall length 76 mm (30.0 in)

Torque MultipliersWarranty: Manufacturer’s

• Used to apply torques above the capability of torque wrenches with an accuracy of ±5%

• The 6V-6080 Multiplier has a maximum torque capacity of 4335 N·m (3200 ft-lb)

• The 6V-7820 Multiplier has a maximum capacity of 1620 N·m (1200 ft-lb)• Both multipliers are designed for use with a 1⁄2 inch square drive torque wrench• The 6V-6080 Multiplier features a directional clutch which holds the windup and provides

ratcheting action so that the multiplier is usable in close quarters where movement of the input wrench is limited

• Both multipliers are designed to provide 360° continuous rotation in both directions• They also have an angle of turn protractor which measures the angle of rotation in 5° increments

for torque turn specifications• Overload protection is provided by the square output drive which shears

at a torque slightly above the maximum output rating• Decals providing torque input and output values are located on the multiplier

Square Square Power Rated Input Maximum RatedPart No. Input Output Ratio Capacity Output Weight

6V-7820 1⁄2 in 3⁄4 in 6 to 1 271 N·m 1620 N·m 4 kg(200 ft-lb) (1200 ft-lb) (9 lb)

6V-6080 1⁄2 in 1.0 in 18.5 to 1 240 N·m 4335 N·m 8.2 kg(177 ft-lb) (3200 ft-lb) (18 lb)

6V-7820


2N-2213 Bearing

6V-4079 Drive Assembly

8H-0707 Bolt

6V-4081 Pinion

3B-3911 Bearing

6V-4083 Gear

6V-6134 Protractor

6V-6080


6L-4082 Race

6V-6135 Gear

6V-6136 Pinion

6V-9137 Pinion

6V-9136 Gear

6V-6134 Protractor

176-2934 Drive Assembly

5P-4115 Washer

6V-6137 Dowl

6V-9135 Pin

6V-6139 Pin

6V-6762 Race

2M-1672 Bearing

2H-2213 Bearing

8T-0893 Screw

8T-5181 Input End Assembly

8T-0894 Hardware Kit


Torque Multipliers / Degree Wheel Torque WrenchesH

and

Tool

s

01c.qxp 10/5/06 1:25 PM Page 60

1P-7460 Mechanical Torque Tester

• Torque wrenches can be checked quickly and easily• Has a range from 680 N·m (0-500 ft-lb)• Furnished with 3⁄8 inch, 1⁄2 inch and 3⁄4 inch adapters to accommodate Caterpillar torque wrenches• Certified accuracy is ±1% or one scale division, whichever is greater

ID: C05337T1

Electronic Torque Testers

European Union Compliant, CE marked• Accuracy better than 1% of the indicated value in ranges between

10% to 100% of maximum rating• Maximum overtorque of 120% of full rating• Reliable “first-peak” mode for tests of click type torque wrenches without

the need for manual sensitivity adjustment—A red light and buzzer indicate capture of first torque peak. Other modes include “peak hold” which records the highest reading during a test and “track” which displays continuously during use.

• Equally accurate in clockwise and counter-clockwise directions• Automatic or manual display reset• Unique adjustable head moves for easy reading• Rechargeable battery with 110 V AC adapter included (not available separately)

NOTE: Use 9U-5101 mounting bracket to mount the testers to a bench top. No bracket is required to mount testers to a vertical surfaces.

ID: C44099T1

Torque RangePart No. Metric Drive U.S. Size

9U-5009 12 to 57 N·m 10 to 50 in-lb 1⁄49U-5010 57 to 282 N·m 50 to 250 in-lb 3⁄89U-5011 226 to 1130 N·m 200 to 1000 in-lb 3⁄89U-5012 68 to 339 N·m 50 to 250 ft-lb 1⁄29U-5013 163 to 813 N·m 120 to 600 ft-lb 3⁄4

ID: C07365T1


1 8T-5190 Wrench Group1

2 8T-5191 Bar

3 8T-5192 Bar

4 8T-5193 Regulator

5 8T-5194 Block (Spacer)

6 8T-5224 Gauge

7 8T-5225 Hose

8 8T-5226 Nipple (two)

9 8T-5227 Coupler (two)

10 8T-5228 Block (base)

11 6V-6105 Block (lid)

12 0T-0065 Bolt, 64 mm (21⁄2 in) long

13 1A-5964 Bolt, 89 mm (31⁄4 in) long

14 5M-2894 Washer (two)

Not shown

1U-5809 Grommet

1U-5748 Output spindle

8T-5321 Seal Kit1 When the 8T-5190 Wrench Set is ordered

separately, the 8T-5192 Bar is assembled onthe wrench. The 8T-5191 Bar is then suppliedas a loose part.


Torque Wrenches Testers / Air Regulated Torque Wrench SetH

and Tools

8T-5230 Air Regulated Torque Wrench Set

• Allows controlled output torque in a range of 34 to 300 N·m (25 to 220 ft-lb)• Readily adapts to 6V-7820 or 6V-6080 Torque Multipliers which provide controlled

torque values between 300 to 4350 N·m (220 to 3200 ft-lb)• Output torque of the wrench can be set by adjusting the air supply at the regulator• Regulator air gauge is calibrated in kPa and PSI• Air pressure of 620 kPa (90 PSI) is required for the maximum torque

setting• 1⁄2 inch drive and rotation is reversible• Most effective where there are several hardware items that require

the same torque; for example, when tightening the wheel nuts or front strut mounting bolts on off-highway trucks

01c.qxp 10/5/06 1:25 PM Page 61

Special Sockets and Extensions

• For use with the 8T-5230 Air Wrench Group to remove and install rear dual rims on 785 and 789 Trucks, 994 Wheel Loader, or other similarly-sized rim

Tool ToolModel Requirement Description Part No.

785 and Remove and Socket 8T-5182789 Install Rim Nuts (1.50 Hex)

785 and Standard Rim Extension 8T-5183789 (16 inch long)

785 and Rim Pilot Deep Socket 1U-5715789 Stud Nuts (1.50 Hex)

789 Large Optional Extension 8T-9265Rims (10 inch long)

994 Standard Rims Extension 4C-9813(17.7 inch long) (spline drive)

994 Standard Rims Socket 4C-9812(46 mm)

Pneumatic Wrench Groups

• Allows controlled output torque from 286 N·m (200 ft lbs) to 4125 N·m (3000ft lbs)

• Output torque is set by adjusting air pressure regulator (part of 194-7591Regulator Group)

• All wrench groups have standard 1 inch square drive• Requires 689 kPa (100 PSI) air pressure to achieve maximum torque

• Wrench group works well in applications requiring different torquespecifications (readjust torque setting by simply adjusting air pressure)

• Regulator group includes cage, hose, pressure gauge, and filter assembly —filter assembly is equipped with air filter, pressure regulator, and automaticoiling system

• Requires 4C-8856 Fitting and 8T-9568 Oil (not included)

ID: C79949T1

194-7586 Pneumatic Wrench Group (RAD 2000) 1

Torque range 571 to 2857 N·m (400 to 2000 ft lbs)

Square drive 1 inch

Air pressure for maximum torque 689 kPa (100 PSI)

Air consumption at 689 kPa (100 PSI) 20 cfm

Minimum pressure 103 kPa (15 PSI)Service Parts


194-7589 Pneumatic Wrench Group

195-7592 Reaction Arm

194-7607 Snap Ring Kit


194-7591 Regulator Group


194-7610 Cage Assembly

194-7611 Filter Assembly

194-7612 Gauge Pressure1 262-6728 Reaction Blank is available

194-7582 Pneumatic Wrench Group (RAD 25) 1

Torque range 1143 to 4285 N·m (800 to 3000 ft lbs)

Square drive 1 inch

Air pressure for maximum torque 689 kPa (100 PSI)

Air consumption at 689 kPa (100 PSI) 32 cfm

Minimum pressure 103 kPa (15 PSI)Service Parts


194-7590 Pneumatic Wrench Group

194-7605 Reaction Arm

194-7608 Snap Ring Kit


194-7591 Regulator Group


194-7610 Cage Assembly

194-7611 Filter Assembly

194-7612 Gauge Pressure1 262-6726 Reaction Blank is available

Repair Information195-3500 and 195-3501 Wrench Assemblies must be sent to the addressbelow for repair. The wrench must be accompanied with a ReturnMaterial Authorization Number before shipping to the OEM.

Maxpro Corporation208 Fairhill St.Willow Grove PA 19090

Phone: (888) 315-0175


Pneumatic Wrenches Torque WrenchesH

and

Tool

s

01c.qxp 10/5/06 1:25 PM Page 62

ID: D01273T1

Low Clearance Hydraulic WrenchesWarranty: Manufacturer’s

• Well suited for high torque and/or low clearance applications• Easy and safe to use• Can decrease bolting time by up to 75%• Accurate to ± 3%• Best torque-to-weight ratio available

1U-6221, 132-8159, and 132-8183• Twin Jet provides fast operation• 360 x 360 degree hose swivel• Tool-free cassette quick connect• Quick tool release means no tool lock-up under severe conditions• Twin pawl equal load ratchet mechanism gives improved durability• Anti-backlash mechanism avoids pre-stall or turning speed slow sown

ID: XLCT_1.jpgPart No. 1U-6221 132-8159 132-8183

Maximum torque (ft lbs) 1844.2 N·m 4136 N·m 8475.4 N·m (1360 ft lbs) (3050 ft lbs) (6250 ft lbs)

Minimum torque (ft lbs) 203.4 N·m 474.6 N·m 881.4 N·m (150 ft lbs) (350 ft lbs) (650 ft lbs)

Accuracy ±3 ±3 ±3Standard link hex sizes 36 mm 46 mm 55 mm 36 mm 46 mm 55 mm 55 mm 65 mm 70 mmPart no. 132-8143 1U-6222 132-8144 132-8176 132-8177 132-8178 132-8190 132-8191 132-8192Hex drive size range1 19 - 65 mm 25 - 80 mm 46 - 95 mm

(3⁄4 - 29⁄16 in) (1 - 31⁄8 in) (11⁄2 - 37⁄8 in)Swivel Seal Kit 132-8142 132-8166 132-8189Square Drive 132-8154 (3⁄4 in) 132-8167 (1 in) 132-8201 (11⁄2 in)Reaction Arm2 n/a 132-8160 132-8184

1 Additional link sizes are available. Call the Hotline to check the availability of additional links. Hotline USA: 1-800-542-8665, Illinois: 1-800-541-8665, Canada: 1-800-523-8665, Geneva phone: ++41 (22) 849 40 48/4428

2 Reaction arm is sold separately.

242-1413, 242-1414, and 242-1415• Low clearance for inaccessible bolting area• Pins give quick tool-free connect/ disconnect of links


Torque Wrenches Hydraulic WrenchesH

and Tools

Part No. 242-1413 242-1414 242-1415

Maximum torque 2237.5 N·m (1650 ft lbs) 5288.6 N·m (3900 ft lbs) 11797.7 N·m (8700 ft lbs)Minimum torque 217 N·m (160 ft lbs) 528.9 N·m (390 ft lbs) 1179.8 N·m (870 ft lbs)Accuracy ±3 ±3 ±3Standard link hex sizes1 36 mm 46 mm 36 mm 46 mm 36 mm 46 mmPart no. 242-1419 242-1420 242-1422 242-1423 242-1424 242-1425Hex drive size range2 19 - 55.6 mm 46 - 80 mm 60.3 - 95 mm

(3⁄4 - 23⁄16 in) (113⁄16 - 31⁄8 in) (23⁄8 - 37⁄8 in)Repair Kit 246-0441 246-0442 246-0443Weight 2.36 kg (5.2 lbs) 5.0 kg (11.05 lbs) 9.3 kg (20.5 lbs)

Note: When ordering a power head low clearance tool, a link must also be purchased to use the power head.

1 Hex links must be purchased with the tool.2 Additional link sizes are available. Call the Hotline to check the availability of additional links. Hotline USA: 1-800-542-8665, Illinois: 1-800-541-8665, Canada: 1-800-523-8665 , Geneva phone: ++41 (22) 849 40 48/4428

01c.qxp 10/5/06 1:25 PM Page 63

ID: C80038T1

Part No. 175-7940 175-7941

Maximum torque 7593.9 N·m (5600 ft lbs) 11119.7 N·m (8200 ft lbs)

Minimum torque 1118.7 N·m (825 ft lbs) 1640.8 N·m (1210 ft lbs)

Drive size 11⁄2 in 11⁄2 in

Accuracy ±3 ±3

Weight 13.2 kg (29 lbs) 14.5 kg (32 lbs)

ID: D01249T1

Square Drive Hydraulic WrenchesWarranty: Manufacturer’s

• Well suited for high torque and/or low clearance applications• Easy and safe to use• Can decrease bolting time by up to 75%• Accurate to ± 3%• Best torque-to-weight ratio available

132-8112, 132-8119, 132-8126, and 132-8133• Dual pawl mechanism prevents repeated bolt wind up• 360 x 180 degree swivel gives hose-free like operation• Quick release levers for accurate pawl release• Uni-body housing provides rigid durability• Anti-lock switch allows instant tool on/off• Anti-rust finish provides corrosion resistance• Click on reaction arm allows instant

on/off reaction arm• Anti-backlash mechanism

Part No. 132-8112 132-8119 132-8126 132-8133

Maximum torque 1884.9 N·m 4447.9 N·m 7580.4 N·m 15621.8 N·m(1390 ft lbs) (3280 ft lbs) (5590 ft lbs) (11520 ft lbs)

Minimum torque 271.2 N·m 650.9 N·m 1132.3 N·m 2379.9 N·m(200 ft lbs) (480 ft lbs) (835 ft lbs) (1755 ft lbs)

Drive size 3⁄4 in 1 in 11⁄2 in 11⁄2 in

Accuracy ±3 ±3 ±3 ±3

Reaction Arm Standard Standard Standard Standard

Weight 2.02 kg 4.51 kg 7.60 kg 13.38 kg(4.45 lbs) (9.95 lbs) (16.75 lbs) (29.50 lbs)

Seal Kit 1U-6225 132-8125 132-8132 132-8139

ID: SQV.jpg

Part No. 242-1410 242-1411 242-1412

Maximum torque 813.6 N·m 1559.45 N·m 4088.5 N·m(600 ft lbs) (1150 ft lbs) (3015 ft lbs)

Minimum torque 94.9 N·m 237.3 N·m 617 N·m(70 ft lbs) (175 ft lbs) (455 ft lbs)

Drive size 3⁄4 in 3⁄4 in 1 in

Accuracy ±3 ±3 ±3

Long Reaction Arm1 242-1416 242-1417 242-1418

Weight 1.4 kg 2 kg 4.5 kg(3.15 lbs) (4.45 lbs) (9.90 lbs)

Repair Kit 246-0438 246-0439 246-04401 Tool comes with standard reaction arm.

242-1408 and 242-1409• Simple to use• Reaction arm pivots into 9 different positions• Uni-body housing

Part No. 242-1408 242-1409

Maximum torque 135.6 N·m (1200 ft lbs) 4013.9 N·m (2960 ft lbs)

Minimum torque 230.5 N·m (170 ft lbs) 585.8 N·m (432 ft lbs)

Drive size 3⁄4 in 1 in

Accuracy ±3 ±3

Weight 2.6 kg (5.8 lbs) 6 kg (13.15 lbs)

Repair Kit 246-0436 246-0437

175-7940 and 175-7941• Simple to use• Unibody housing


Hydraulic Wrenches Torque WrenchesH

and

Tool

s

242-1410, 242-1411, and 242-1412• 360 degree swivel for hose attachment• Click on reaction arm• Standard square drive• Ergonomic design• Lightweight tool

01c.qxp 10/5/06 1:25 PM Page 64

Hydraulic PumpsWarranty: Manufacturer’s

• Includes hydraulic gauge• Includes high-quality hose, 69,950 kPa (10,000 PSI)

ID: D01261T1

Part No. Maximum Oil Flow Voltage Single / Weight Dual Port

Electrical

175-7944 8.2 cu liter (500 cu in) 115 VAC Single 28.1 kg (62 lbs)50/60 HzSingle phase

175-9412 8.2 cu liter (500 cu in) 230 VAC Single 28.1 kg (62 lbs)50/60 HzSingle phase

132-8223 11.8 cu liter (720 cu in) 115 VAC Dual 23.6 kg (52 lbs)50/60 HzSingle phase




Air

132-8232 4.6 cu liter (280 cu in) 230 VAC Dual 20.9 kg (46 lbs)(not shown) 50/60 Hz

Single phase

Manual

175-7945 2.5 cu liter (152 cu in) n/a Single 11.8 kg (26 lbs)

ID: 87997T1


Torque Wrenches Hydraulic Pumps / Impact WrenchH

and Tools


5P-2700 Side Plate Assembly

1H-8134 Ring

5P-2688 Spring

5P-2693 Gasket

5P-2692 Head

5P-2694 Spring

5P-2697 Handle Assembly

1A-2209 Bolt

5P-2701 Side Plate Assembly

5P-2690 Ratchet

5P-2410 Hand Impact Wrench• Loosen nuts bound by corrosion and tighten nuts

to an estimated torque value readily with this impact wrench

• Particularly suited to field use because an air or electric power source is not required

• With a 1 inch square drive and capacity up to 2000 ft-lb torque, the wrench will handle 3⁄4 inch to 13⁄4 inch bolts

• Wrench action provides impact torque in one direction and free ratcheting in the other• When turned about 30°, energy stored in a heavy spring in the handle is suddenly released, delivering a torsional impact

to the square output drive through a link and rotary hammer arrangement. To reverse the direction of this action, the wrench is merely turned over. The amount of impact is adjustable.

01c.qxp 10/5/06 1:25 PM Page 65

Pneumatic Tools

Impact Wrenches, 3⁄8 inchWarranty: Manufacturer’s

European Union Compliant, CE marked• Reverse bias air motor provides greater power in reverse for extra break away torque• Molded ergonomic handle grip reduces vibration and operator fatigue• Built in power regulator allows power output to be adjusted to operating conditions


Impact Wrenches Pneumatic ToolsH

and

Tool

s

ID: D00461T1

Part No. 222-3048

Drive size 3⁄8 in

Recommended air pressure 620 kPa (90 PSIG)

Air consumption, free speed 14 SCFM (1.9 CFM) [53.8 I/min.]

Air consumption, working 25 SCFM (3.5 CFM) [99.11 I/min.]

Free speed, forward 8000 RPM

Free speed, reverse 9000 RPM

Sound level, free speed 84.6 dBa

Sound level, working 95.6 dBa

Blows per minute 1170

Torque range 68-251 N·m (50-185 ft-lb)

Maximum torque 251 N·m (185 ft-lb) Forward285 N·m (210 ft-lb) Reverse

Air inlet thread size 1⁄4 in - 18 NPT

Recommended hose size, ID min. 10 mm (3⁄8 in)


Height 179 mm (7 in)

Width 57 mm (2.24 in)

Weight 1.70 kg (3.75 lbs)

Impact Wrench Repair Kits• Used to repair current Caterpillar branded air-powered impact wrenches• Reduce air tool repair cost by performing in-house repairs• Reduced downtime (no need to ship air tool to a repair center)

Repair Kits

Impact Wrench AnvilPart No. Description Part No. Part No.

231-6041 3⁄8 inch Motor and Throttle Repair Kit 222-3048 —

231-6043 3⁄8 inch Anvil Repair Kit 222-3048 280-2681


231-6061 3⁄8 inch Anvil Repair Kit 222-3049 —

231-6063 1⁄2 inch Motor and Throttle Repair Kit 222-3050 / 222-3051 —

231-6064 1⁄2 inch Anvil Repair Kit 222-3050 / 222-3051 280-2682



231-6073 1 inch Motor and Throttle Repair Kit 222-3054 —

231-6071 1 inch Anvil Repair Kit 222-3054 280-2684







01c.qxp 10/5/06 1:25 PM Page 66

Impact Wrenches, 1⁄2 and 3⁄4 inchWarranty: Manufacturer’s

European Union Compliant, CE marked• Aluminum housing reduces weight and provides durable long life• Steel nose front for extra protection, easy service access• Power speed regulator allows power output to be adjusted to operating conditions• Variable speed trigger allows operator versatility over wide range of fasteners

ID: D00335T1

Part No. 222-3050 222-3053

Drive size 1⁄2 in 3⁄4 in

Recommended air pressure 620 kPa (90 PSIG) 620 kPa (90 PSIG)

Air consumption, free speed 30 SCFM (4.2 CFM) [118.9 I/min.] 41 SCFM (5.8 CFM) [164.2 I/min.]

Free speed, forward 8000 RPM 4500 RPM

Free speed, reverse 8000 RPM 5000 RPM

Sound level, free speed 108 dBa 92 dBa

Torque range 35-408 N·m (25-300 ft-lb) 407-1085 N·m (300-800 ft-lb)

Maximum torque 578 N·m (425 ft-lb) Forward 1626 N·m (1200 ft-lb)578 N·m (425 ft-lb) Reverse

Air inlet thread size 1⁄4 in - 18 NPT 3⁄8 in - 18 NPT

Recommended hose size, ID min. 8 mm (5⁄16 in) 10 mm (3⁄8 in)

Overall length 185 mm (7.3 in) 259 mm (10.2 in)

Weight 2.63 kg (5.8 lbs) 6.59 kg (14.5 lbs)


Repair Kits



















Pneumatic Tools Impact WrenchesH

and Tools

01c.qxp 10/5/06 1:25 PM Page 67

ID: D00851T1

ID: D00857T1

Part No. 222-3054 222-3055

Drive size 1 in 1 in


Air consumption, free speed 26 SCFM (3.6 CFM) 41 SCFM (8.3 CFM) [164.2 I/min.]

Air consumption, working 38 SCFM (5.3 CFM) [150.1 I/min.] 38 SCFM (5.3 CFM) [150.1 I/min.]

Free speed, forward 4000 RPM 4000 RPM

Free speed, reverse 4000 RPM 4000 RPM


Sound level, working 103 dBa 103 dBa

Blows per minute 500 505

Torque range 813-1898 N·m (600-1400 ft-lb) 813-1898 N·m (600-1400 ft-lb)

Maximum torque 3796 N·m (2800 ft-lb) 4067 N·m (3000 ft-lb)



Overall length 302 mm (11.8 in) 535 mm (21 in)

Height 270 mm (10.6 in) 172 mm (6.8 in)

Width 111 mm (4.37 in) 110 mm (4.33 in)

Weight 12.05 kg (26.5 lbs) 12.27 kg (27 lbs)


Repair Kits



















Impact Wrenches Pneumatic ToolsH

and

Tool

s

Impact Wrenches, 1 inchWarranty: Manufacturer’s

European Union Compliant, CE marked• Power speed regulator allows power output to be adjusted to operating conditions• Variable speed trigger allows operator versatility over wide range of fasteners

01c.qxp 10/5/06 1:25 PM Page 68

Sanders and PolishersWarranty: Manufacturer’s

European Union Compliant, CE marked• Aluminum housing reduces weight and provides durable long life• Compact design for easy maneuvering in restricted areas• Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs motor life• Full choice of RPM ranges• 5 inch and 7 inch HD angle, 2-handed vertical and in-line sanders• 7 inch polisher• Option: 224-5758 Sanding Disc, 127 mm (5 in), 80 grit, 25 per package

ID: D00341T1

ID: D00365T1

Part No. 222-3063 222-3064 222-3065 222-3067 222-3068 222-3084 222-3069

Description Palm Sander, 6 in 7 in Angle Sander 7 in Vertical Sander In-line Sander 6 in OASander 5 in Compact Sander 7 in Angle Polisher

Recommended air pressure 620kPa (90 PSIG) 620kPa (90 PSIG) 620kPa (90 PSIG) 620kPa (90 PSIG) 410kPa (60 PSIG) 620kPa (90 PSIG) 620kPa (90 PSIG)

Air consumption, free speed 36 SCFM (5 CFM) 34 SCFM (4.8 CFM) 31 SCFM (4.3 CFM) 16 SCFM (2.3 CFM) 11 SCFM (2.1 CFM) 32 SCFM (4.2 CFM) 34 SCFM (4.8 CFM)[141.6 I/min.] [135.9 I/min.] [121.8 I/min.] [65.13 I/min.] [59.47 I/min.] [118.9 I/min.] [135.9 I/min.]

Air consumption, working — — — — — — 31 SCFM (4.3 CFM)[121.8 I/min.]

Horsepower — 1 — — 0.25 0.3 1

Free speed 10000 RPM 5100 RPM 4500 RPM 1800 osc/min 10000 RPM 1400 RPM 2600 RPM

Sound level, free speed 83 dBa 84 dBa 83 dBa 87 dBa 93 dBa 88 dBa 84 dBa

Spindle thread 5⁄16 in - 18 UNC 5⁄8 in - 11 UNC 5⁄16 in - 11 UNC — 5⁄16 in - 18 UNC 7⁄16 in - 20 UNC 5⁄8 in - 11 UNC

Pad/disc size, diameter 152 mm (6 in) 178 mm (7 in) 178 mm (7 in) 23⁄4 x 171⁄2 150 mm (6 in) 127 mm (5 in) 178 mm (7 in)

Backing Pad 231-9464 231-9465 231-9465 231-9467 231-9468, 246-7509 231-9469 231-9465

Buffing Pad — — — — — — 231-9471

Air inlet thread size 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT

Recommended hose size, ID min. 8 mm (5⁄16 in) 8 mm (5⁄16 in) 10 mm (3⁄8 in) 8 mm (5⁄16 in) 8 mm (5⁄16 in) 8 mm (5⁄16 in) 8 mm (5⁄16 in)

Overall length 122 mm (4.8 in) 410 mm (15.75 in) — 406 mm (16 in) 260 mm (10.2 in) 118 mm (4.6 in) 410 mm (15.75 in)

Height — 102 mm (4 in) 190 mm (7.5 in) 121 mm (4.75 in) — 121 mm (4.75 in) —

Weight 1.36 kg (3 lbs) 3.09 kg (6.8 lbs) 2.72 kg (6 lbs) — 2.2 kg (4.9 lbs) — —

Compounding/buffing pad (included) — — — — — — BFS80


Pneumatic Tools Sanders and PolishersH

and Tools

01c.qxp 10/5/06 1:25 PM Page 69

Air GrindersWarranty: Manufacturer’s

European Union Compliant, CE marked• Aluminum housing reduces weight and provides durable long life• Compact design for easy maneuvering in restricted areas• Paddle-style, variable speed throttle safety trigger prevents accidental startup; easy to use, versatile• Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs motor life• Powerful .2 horsepower motor• Angle head zirk grease fitting (right angle only) allows lubrication of gear train, prolongs life of tool

ID: D00317T1

ID: D00311T1

Part No. 222-3074 222-3076 222-3077

Tool description Medium Mini Right Angle ExtendedDie Grinder Die Grinder Die Grinder

Recommended air pressure 620 kPa (90 PSIG) 620 kPa (90 PSIG) 620 kPa (90 PSIG)

Air consumption, free speed 25 SCFM (3.5 CFM) [99.11 I/min] 15 SCFM (2.1 CFM) [59.47 I/min] 25 SCFM (3.5 CFM) [99.11 I/min]

Air consumption, working — — —

Horsepower 0.2 0.2 0.2

Free speed 22000 RPM 20000 RPM 22000 RPM

Sound level, free speed 91 dBa 93 dBa 91 dBa

Air inlet thread size 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT 1⁄4 in - 18 NPT

Recommended hose size, ID min. 8 mm (5⁄16 in) 8 mm (5⁄16 in) 8 mm (5⁄16 in)

Collet size 1⁄4 in 1⁄4 in 1⁄4 in

Overall length 165 mm (6.5 in) 140 mm (5.5 in) 293 mm (11.5 in)

Disc size, diameter — — —

Grinding disc set (incl.) — — —

Weight 1.09 kg (2.4 lbs) .64 kg (1.4 lbs) 1.05 kg(2.5 lbs)

Part No. 222-3071 222-3072

Tool description 7 in Angle Grinder 7 in Vertical Grinder

Free speed 6000 RPM 6000 RPM

Wheel capacity 175 mm (7 in) 175 mm (7 in)

Weight 2.7 kg (5.9 lbs) 4.1 kg (9.1 lbs)

Length 315 mm (12.4 in) —

Height — 180 mm (7.1 in)

Sound level 85 dBa 82 dBa

Air consumption under load 17 I/s (35 cfm) 28 I/s (60 cfm)

Air consumption free speed 8 I/s (18 cfm) 28 I/s (60 cfm)

Spindle thread 5⁄8 in - 11 5⁄8 in - 11


Air Grinders Pneumatic ToolsH

and

Tool

s

01c.qxp 10/5/06 1:25 PM Page 70

Air DrillsWarranty: Manufacturer’s

European Union Compliant, CE marked• Aluminum housing reduces weight and provides durable long life• Compact design for easy maneuvering in restricted areas• Contoured button style variable speed trigger is easy to use; versatile• Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs motor life• Powerful, reversible .3 horsepower motor

ID: D00863T1

Part No. 222-3061 222-3062

Description 3⁄8 in Reversible 1⁄2 in Reversible

Chuck range, diameter 1⁄16 in - 3⁄8 in —

Air consumption, free speed 71 SCFM (10 CFM) [283.2 I/min.] 71 SCFM (10 CFM) [283.2 I/min.]

Air consumption, working 43 SCFM (6 CFM) [169.9 I/min.] 43 SCFM (6 CFM) [169.9 I/min.]

Horsepower 0.3 0.3

Free speed 2200 RPM 900 RPM


Sound level, working 104 dBa 109 dBa

Spindle thread 3⁄8 in - 24 UNF 3⁄8 in - 24 UNF

Torque range 0-4 N·m (0-35 in-lb) 0-6.8 N·m (0-60 in-lb)




Overall length 199 mm (7.85 in) 224.8 mm (8.85 in)

Weight .45 kg (2.85 lbs) 1.61 kg (3.55 lbs)

Drill Chuck (key) 243-6496 243-6495

Drill Chuck (keyless) 234-0544 234-0545

222-3080 Air HammerWarranty: Manufacturer’s

European Union Compliant, CE marked• Aluminum housing reduces weight and provides durable long life• Variable speed trigger is easy to use, versatile• Air directed exhaust• Air line filter• Nylon friction plugs• Long barrel for easier access to hard to reach areas• QC chuck ID: D00353T1

Tool description Long Air Hammer w/QC Chuck


Air consumption 28.5 SCFM (4 CFM)

Sound level, free speed 100 dBa

Blows per minute 2200





Spring Retainer available 232-0756


Pneumatic Tools Air Drills / Air HammerH

and Tools

01c.qxp 10/5/06 1:25 PM Page 71

ID: D00305T1

223-1154 Air EngraverWarranty: Manufacturer’s

European Union Compliant, CE marked


Average air consumption 7 SCFM (1.0 CFM)

Free speed 14000 RPM

Sound level 90.0 dBa



Hose length 1511 mm (59.5 in)

Overall length without hose 140 mm (5.5 in)

Weight .22 kg (.48 lbs)

Air Engraver Needles• Punch 3⁄16 inch diameter starting hole• Material: tungston carbide steel


223-4357 Needle, Coarse

223-4358 Needle, Medium

223-4359 Needle, Fine

Air Hammer Accessories

• Used with 222-3080 Air Hammer• Material: tungsten carbide steel

ID: D00551T1

223-4352

223-4353

223-4354

223-4355

223-4356

Part No. Description Size Use

223-4352 Sheet Metal Ripper 5⁄8 in wide —5 in long

223-4353 Flat Chisel 3⁄4 in wide —7 in long

223-4354 Panel Cutter 3⁄4 in wide Slices bushings, 6 in long cylinder sleeves, etc.

223-4355 Slitting Chisel 1 in wide Cuts exhaust and tail pipes6 7⁄8 in long

223-4356 Weld Breaker 5⁄8 in wide (tip) —63⁄4 in long

226-0102 Punch, 15 Degree 228.6 mm (9 in) long —10.18 mm (0.4 in) shank diameter

226-0124 Straight Punch 228.6 mm (9 in) long —10.18 mm (0.4 in) shank diameter

222-3059 Air RatchetWarranty: Manufacturer’s

European Union Compliant, CE marked• Aluminum housing reduces weight and provides durable long life• Versatile, easy-to-use paddle-style trigger; variable speed trigger• Ball bearing mounted air motor reduces vibration

and operator fatigue; prolongs motor life• 200 RPM free speed, 250 in-lbs torque

output — fast and powerful

Drive size 3⁄8 in


Free speed air consumption 22 SCFM (3.0 CFM)

Free speed 200 RPM


Torque range 7-81 N·m (5-60 ft-lb)


Recommended hose size 10 mm (3⁄8 in)



ID: D00413T1


Average air consumption 4 CFM [113.3 I/min.]

Horesepower 0.6


Sound level, working 99.6 dBa

Cutting capacity 1.2 mm (3⁄64 in)

Width of cut 5.6 mm (7⁄32 in)

Cutting speed 4.572 m (15 ft) per minute

Strokes 2500 per minute



Overall length 254 mm (10 in)



Miscellaneous Pneumatic ToolsH

and

Tool

s

222-3083 ShearsWarranty: Manufacturer’s


01c.qxp 10/5/06 1:25 PM Page 72

ID: D01189T1

ID: D00581T1

Air HoseWarranty: Manufacturer’s


231-0039 Air Hose Assembly• Constructed with a yellow, oil and abrasion resistant outer cover, extra strong polyester

braiding, inner tube, rugged bend restrictor, and solid brass fittings• Maximum working pressure: 2400 kPa (350 PSI)• Made of virgin resin PVC giving it excellent flexibility and low temperature resistance• Easy-to-handle, lightweight hose reduces operator fatigue• Each package contains 15 meters (50 ft) of 9.6 mm (3⁄8 in) ID hose• 1⁄4 inch male NPT threaded brass fitting on each end

ID: D00605T1

231-0040 Hose Display Kit• 10-pack display ideal for any retail location — increases visibility and

allows hose to be placed individually for light traffic areas or groupedin a modular configuration for high traffic areas

4C-5746 Pneumatic Syphon Spray GunWarranty: Manufacturer’s

• Ergonomic, rugged, die cast aluminum pistol grip designed for heavy-duty use• High vacuum syphon delivers up to 60.6 l (16 gal) per hour• 304.8 mm (12 in) extension for accessing difficult, hard-to-reach areas• Adjustable trigger and nozzle tip control volume and spray pattern• 1⁄4 inch NPT inlet• Meets OSHA standards

ID: D01195T1

Long John® Safety Air GunsWarranty: Manufacturer’s

High Power Extension Air Gun• Versatile tool ideal for cleaning hard-to-reach locations• Good for cleaning benchtops, workstations, machinery, and equipment• Venturi tip increases the power and limits static pressure to less than

207 kPa (30 PSI) when tip is blocked• Includes durable cast aluminum, pistol-style body, aluminum extension,

and aluminum nozzle• 1⁄4 inch NPT inlet• Meets OSHA standards


156-0930 Long John Safety Air Gun, 61 cm (24.0 in)




Pneumatic Tools MiscellaneousH

and Tools

01c.qxp 10/5/06 1:25 PM Page 73

ID: D01213T1

ID: C41204T1Part No. Description

4C-6778 Spray Gun Canister

Pneumatic Oil GunWarranty: Manufacturer’s

• Ergonomic, rugged, die cast aluminum construction pistol grip designed forheavy-duty use

• High vacuum syphon delivers up to 49.2 l (13 gal) per hour• 304.8 mm (12 in) extension for accessing hard-to-reach areas• Adjustable trigger and nozzle tip control volume and spray pattern• 0.95 l (1 qt) steel, reusable dispenser eliminates feed tubes and buckets• Good for lubricating trucks, automobiles, construction equipment, and

machinery• 1⁄4 inch NPT inlet• Meets OSHA standards

ID: C41555T1

Jet Guard Safety Air GunWarranty: Manufacturer’s

• Patented protective air cone protects operator from chip fly-back• Delivers high thrust with pinpoint accuracy• Knurled adjusting nut controls air volume• Ergonomic pistol grip and trigger reduce hand fatigue• Good for cleaning machine tools and other production equipment• Built in hanger for easy storage• Durable cast aluminum body• 1⁄4 inch NPT inlet• Meets OSHA standards

ID: D01183T1


156-0927 Jet Guard Safety Air Gun

Safety Blow GunsWarranty: Manufacturer’s

• Supplies non-aspirating, high velocity, sharply defined, collimated air stream particularly suited for cleaning small blind holes and cavities

• Complies with OSHA standards for dead-ended nozzle pressure and noise limitation• Uses 90 to 100 PSI line pressure without reduction• Minimizes compressed air usage Test Lab

Part No. Description Listing

4C-3302 Air Blow Gun w/Nozzle Assembly UL/FM

4C-3304 Nozzle w/152 mm (6 in) Extension —

Gun Vac®

Warranty: Manufacturer’s

• Rugged aluminum construction• Uses standard shop compressed air• No motor, wires, or electrical fields• Creates twice the vacuum suction of conventional electric shop vacuums• Reusable collection bag• Includes brush and crevice tool• 1⁄4 inch NPT inlet


4C-6774 Gun Vac, 551 x 1034 kPa (80-150 PSI)

4C-6775 Reusable Bag, 241.3 x 285.75 mm (9.5 x 11.25 in)

4C-6776 Extension, 457.2 mm (18 in)

Spray Gun CanisterWarranty: Manufacturer’s

• 0.94 l (1 qt) canister attaches to spray gun eliminating feed tubes andbuckets

• Increased mobility reduces the risks of spills


Miscellaneous Pneumatic ToolsH

and

Tool

s

ID: D01135T1


4C-6779 Pneumatic Oil Gun

01c.qxp 10/5/06 1:25 PM Page 74

ID: C41367T1


Electrical Tools Grinders / DrillsH

and Tools

Electrical Tools

288-2512 Heavy-Duty Angle Grinder, 11,000 RPM, 4.5 inchWarranty: Manufacturer’s

• Turns at 11,000 RPM for maximum grinding performance and efficiency• Vibration-control side handle reduces vibration up to 60%, providing uncompromising comfort for extended

periods of work• AC/DC capability extends the versatility of the tool by working from DC outlets such as welders and generators• Sealed switch keeps debris out of the switch mechanism and extends switch life• Service Minder brushes eliminate guesswork, stop the tool when preventative maintenance is required• Epoxy-coated field windings provide ultimate protection against abrasive dust and metal debris• 5⁄8 inch - 11 spindle for mounting most popular accessories• Tool-free adjustable guard for quick guard installation and adjustments• Spindle lock for quick wheel changes• 2-position auxiliary handle specifically designed and angled

to a “natural” position for maximum comfort and control• Double insulated, UL listed, OSHA compliant

Power 120V AC/DC

Motor Amps 7.5

No load speed (RPM) 11,000

Spindle thread size 5⁄8 inch - 11

Wheel size 114.3 mm (41⁄2 in)

Length 285.75 mm (111⁄4 in)

Net weight 1.95 kg (4.3 lbs)

ID: C78566T1

5

10

20

30

151-0968

Extra Battery

Case

BatteryCharger

151-0968 Cordless Heavy-Duty Variable Speed Drill, 3⁄8 inch, 12 VoltSMCS Code: 0600Model: AllWarranty: Manufacturer’s

• Replaces discontinued 4C-9928 Heavy-Duty Variable Speed Drill

Drill• Advanced Magnaquench™ Rare-Earth motor combines neodymium iron-boron high

density magnets for high torque, high efficiency, and long run times• Motor is fan cooled to withstand heavy use• Uses long life brushes that never need replacing, for tough professional applications• Two speed ranges of 0 to 400 rpm for high torque and 0 to 1200 rpm for high speed• Twenty-position adjustable clutch offers complete control of torque from 15 to 330 in-lbs• Electric brake stops tool instantly when variable speed trigger is released• Keyless Jacobs™ chuck provides maximum gripping power• Variable speed trigger and reversing button positioned for one-handed operation• Warranted by manufacturer for 1 year from date of purchase

Batteries• Group comes with two 12 Volt removable battery packs• High Amp/hour batteries run 30% longer between recharge cycles than standard batteries• Batteries do not develop memories (do not have to be run down completely before charging)

Battery Charger• Charges battery using a soft-pulse method for long battery cycle life• Maintains charge by trickle charging• Will detect a weak or defective pack that needs to be replaced• Built-in sensor waits for battery to cool or warm, before it begins to charge

Power 120 VAC, 60 Hz, single phase

Battery voltage 12 VDC

Clutch 20 positions

Speed ranges 0 to 350 rpm and 0 to 1250 rpm

Weight with battery pack 1.9 kg (4.25 lbs)

Shipping weight 6.6 kg (14.5 lbs)

19.2 Volt Cordless Drill and Impact Wrench Battery ChargersWarranty: Manufacturer’s

• Replacement chargers for cordless drills and impact wrenches (233-9733, 233-9734, 233-9735, 233-9736, and 233-9737 Drill Kits and 233-9689, 233-9690, 233-9712, 233-9731, and 233-9732 Impact Wrench Kits)

• Used with 233-9746 Battery• Cordless impact wrench and drill battery chargers deliver

a more complete charge that contributes to longer battery pack life

• Built-in microprocessor monitors battery pack status every 10 seconds to ensure a fully charged battery

• Automatically stops charging when battery is fully charged (provides maximum battery life)

Part No. Description Voltage

233-9738 Battery Charger (U.S.A.) 120V, 60 Hz

233-9740 Battery Charger (Japan) 100V, 60 Hz

233-9741 Battery Charger (Australia) 220 to 240V, 50/60 Hz

233-9743 Battery Charger (UK) 220 to 240V, 50/60 Hz

233-9745 Battery Charger (Europe) 220 to 240V, 50/60 Hz

Battery voltage 19.2 VDC

Battery type Nickel-cadmium

Charging time 60 minutes


Charger output 2.4 Amps

01c.qxp 10/5/06 1:25 PM Page 75

ID: C34472T1

Bi-Metal All-Purpose Tiger™ Saw Blades

Part No. Length Teeth/inch Qty/pkg Recommended Use

4C-9942 152 mm (6 in), flexible 18 5 Heavy gauge (non-ferrous metals) — bar and angle stock-stainless-galvanized pipe-tubing (over 18 ga.)

4C-9943 152 mm (6 in), flexible 14 5 Heavy gauge (non-ferrous metals) — bar and angle stock-cast aluminum-copper-brass-galvanized pipe-tubing (over 18 ga.)

4C-9944 229 mm (9 in) 5⁄7 5 General roughing-in wood

4C-9945 305 mm (12 in) 6 5 General roughing-in wood

BIM and HCS Saw Blades (not shown)

Part No. Length Teeth Qty/pkg Teeth Specs

1U-9234 305 mm (12 in) 457 mm (18 in) 5 Raker BIM1

1U-9236 305 mm (12 in) 610 mm (24 in) 10 Wavy BIM

1U-9238 305 mm (12 in) 813 mm (32 in) 5 Wavy BIM

1U-9240 305 mm (12 in) 457 mm (18 in) 5 Raker HCS2

1U-9242 305 mm (12 in) 610 mm (24 in) 5 Wavy HCS

1U-9244 305 mm (12 in) 813 mm (32 in) 5 Wavy HCS

1 BIM — All purpose blade, highly flexible, for the most difficult materials.2 HCS — High carbon steel blade, for non-hard materials.

233-9747 Mobile ChargerWarranty: Manufacturer’s

European Union Compliant, CE marked• 12 volt, mobile charger for cordless drills and impact wrenches (233-9733, 233-9734, 233-9735, 233-9736,

and 233-9737 Drill Kits and 233-9689, 233-9690, 233-9712, 233-9731, and 233-9732 Impact Wrench Kits)• Used with 233-9746 Battery• Charges drill or impact wrench battery from any 12 Volt vehicle/machine/marine battery• Fully charges battery in one hour• UL, GS, and PSE certified

9U-5590 Double Insulated Extra Heavy-Duty Angle Electric Drill, 3⁄8 inchWarranty: Manufacturer’s

• Lightweight — 1.36 kg (3 lbs)• Genuine SIOUX-wound motor for long life• Variable speed, reversible, double insulated

ID: C44291T1

RPM Side Full Maximum CapacityChuck No To Load Overall Net Wt. Max. In In

Part No. Size Load Center Volts Amps Length Tool Only HP Steel Hdwood.

9U-5590 3⁄8 in 0-1300 1 in 115 3.5 10 in 3.5 lb .375 3⁄8 in 1 in(9.52 mm) (25.4 mm) (254 mm) (1.6 kg) (.280 kW) (9.52 mm) (25.4 mm)

Saw Blades — designed for use on most saws

ID: C68871T1

4C-9942 4C-9943

4C-9944

4C-9945

1U-9187 Ground Fault Circuit InterrupterWarranty: Manufacturer’s

• Assures you of reliable ground fault protection in wet or damp areas• Can be used with power tools, in marine and other wet locations• High strength rain-tight nylon case molded for easy gripping when inserting

or removing unit from a receptacle• Slim design permits use in a standard duplex receptacle without blocking

the other outlet• Neon lamp indicates if the Ground Fault Circuit Interrupter has tripped,

giving a clear indication of the plug’s status from a distance or in the dark• Unique design features an internal safety relay which prevents potentially

faulty equipment from being energized when the supply circuit has an open or disconnected neutral

• Protection assured even if the supply circuit polarity is unintentionally reversed• Four grommets are included to provide a secure, raintight seal; they accommodate

cord diameters from 9 mm (.35 in) to 16.5 mm (.65 in); screw-on relief cord grip will not damage or interfere with conductor terminators

• Class A Portable — listed by Underwriters’ Laboratories, Inc

NOTE: Not to be used with double insulated equipment


Drills / Saw Blades Electrical ToolsH

and

Tool

s

Supply voltage 120 (+10, -15) VAC, 60 Hz, single phase

Ratings 15A., 125VAC

Configuration NEMA 5-15P, 2-Pole, 3-Wiring Grndg.

Operating temperature -35°C (-30°F) to 66°C (150°F)

Trip threshold 5 ± 1 mA.

Trip time 0.025 sec. nominal as per U.L. Standard

Case material Gray nylon

Dimensions Length — 140 mm (5.50 in)Height — 70 mm (2.75 in)Width — 44 mm (1.75 in)

Cord type AWG 14/3 or 12/3, SJ, SJO, SJT, SJTO, S, SO, STO

Cord grip range 9.1 mm - 16.5 mm (.36 in - .65 in)

01c.qxp 10/5/06 1:25 PM Page 76

Casting Salvage


Casting Salvage Thread Repair KitsH

and Tools

Full-Torque® Thread Repair Kits

• Unique threaded insert design repairs damaged threaded holes in cast and ductile iron, steel, and aluminum• Spiralhook™ threads engage tapped hole and draw surrounding metal into threads, as bolt or stud is torqued, resulting in a stronger repair• Thread Repair Solid Plug inserts allow off-center and custom-size thread repairs• Viable alternative to welding cast and ductile iron, steel, and aluminum• In many cases parts can be repaired without disassembly• Six kits with individual written installation instructions for a wide range of repair solutions

D00436T1

263-71401-8 Thread Insert Kit for ductile iron in Off-HighwayTruck and Wheel Loader wheels; can also be usedon steel fabricated and cast wheels

Part No. Description Quantity

263-7160 Drill Bit, 19⁄64 inch 1

263-7161 Rough Tap 1

263-7162 Finish Tap 1

263-7170 Installation Tool 1

263-7173 Thread Insert, 1-8 5

263-7145M20 Thread Insert Kit for repair of 3116 blockhead bolt holes


263-7180 Drill Bit, 57⁄64 inch 1




263-7174 Thread Insert, M20 5

263-7141M24 Thread Insert Kit for ductile iron in Off-Highway Truck and Wheel Loader wheels; can alsobe used on steel fabricated and cast wheels


263-7160 Drill Bit, 19⁄64 inch 1





263-7142M30 Thread Insert Kit for ductile iron housing on 797 Off-Highway Truck wheels


263-7178 Drill Bit, 125⁄64 inch 1

263-7179 Drill Fixture 1





263-7144M36 Thread Insert Kit for ductile iron housing on 797 Off-Highway Truck wheels; also used forrepairing 797 front axle steering bracket mounting holes


263-7172 Drill Bit, 141⁄64 inch 1

263-7179 Drill Fixture 1





ID: D00448T1

263-7146Thread Repair Solid Plug Insert Kit for drilling andtapping off-center and custom-size threadedholes1; used for repairing 797 differential retainingbolt holes in thrust washer halves


263-7260 Drill Bit, 21⁄32 inch 1

263-7177 Spotfacer 1



263-7258 Tapping Fluid 1

263-7259 Thread Sealant 1

263-7175 Solid Plug Insert 51 Maximum I.D. thread size of original threaded hole

is 1⁄2 inch

01c.qxp 10/5/06 1:25 PM Page 77

D00442T1Tools


263-7184 Magcheck™ Kit 1

263-7190 Pneumatic Tapping Tool 1

263-7253 Large Collet for 263-7190 1

263-7254 Quick Change Tap Adapter 1

263-7249 Trim-Kut® 3 inch Discs (includes 1⁄4 inch mandrel) 10

D00781T1


“L” Series Stitching Pins, 6.3 mm (.248 in) Thread Diameter

263-7193 Stitch Pin, 6.3 mm (.250 in) length 100



263-7196 Stitch Pin, 25.4 mm (1.00 in) length 100

263-7197 Drill Bit, wire size 7 2

263-7198 Starting Tap 1

263-7199 Bottom Tap 1

263-7200 Piloted Tap 1

263-7201 Drilling Jig 1

“L” Series Stitching Pins, 8.3 mm (.326 in) Thread Diameter




263-7208 Drill Bit, letter size L 2

263-7205 Starting Tap 1


263-7207 Piloted Tap 1


“C” Series Stitching Pins, 6.0 mm (.233 in) Thread Diameter




263-7212 Stitch Pin, 19 mm (.750 in) length 100

263-7213 Stitch Pin, 28.6mm (1.125 in) length 100



263-7215 Finishing Tap, fine 1

263-7216 Bottom Tap, fine 1


263-7218 Drill Stop 1

“C” Series Stitching Pins, 9.5 mm (.375 in) Thread Diameter





263-7226 Drill Bit, letter size O 2







Lock, 20 mm (.793 in) Long

263-7230 Lock, 3.2 mm (.125 in) thick 10




Lock, 36 mm (1.409 in) Long

263-7235 Bottom Lock, 2 mm (.080 in) thick 10

263-7236 Surface Lock, 4 mm (.160 in) thick 10

263-7238 Drill Bit Set, 1⁄8 and 3⁄16 inch 3 each

263-7240 Drill Stop, 1⁄8 inch 1



Lock, 48 mm (1.877 in) Long

263-7242 Bottom Lock, 5 mm (.190 in) thick 10

263-7243 Surface Lock, 9.5 mm (.375 in) thick 5

263-7244 Drill Bit Set, 1⁄8 and 1⁄4 inch 3 each





Crack Repair Kit Casting SalvageH

and

Tool

s

263-7147 Lock-N-Stitch® Crack Repair Kit

• Unique threaded stitching pins and locks repair cracks in cast and ductile iron, steel, or aluminum castings

• L-Series Stitching Pins use an interference fit to seal pressure tight and can be installed at steep angles

• C-Series Stitching Pins feature SpiralhookTM threads to produce drawing pressure that pulls sides of the crack together for strength

• Locks installed across a crack; drill jigs create precise hole patterns across cracks in castings; locks driven into hole patterns creating additional strength

• Cold process — viable alternative to welding• In many cases parts can be repaired without disassembly• Extensive kit features specialized tools, complete instructions including

six DVDs covering all aspects of crack repair, and storage case• Provides a wide range of repair solutions

01c.qxp 10/5/06 1:25 PM Page 78

Tool Boxes

Tool Storage UnitsWarranty: Manufacturer’s

• Uniweld modular design increases the durability of cabinets• Full suspension ball bearing drawers• 400-pound capacity drawers• Drawer interior customization (partitions and dividers provided)• Drawer inserts provided• 30- and 45-inch roller cabinets have 6 inch, heavy duty,

900-pound-capacity casters• 60-inch roller cabinet has spring loaded 6 inch, heavy duty, 1200-pound-capacity casters• Mobile handle with black end caps (handle matches cabinet color)• For the 45- and 60-inch cabinets, drawer bank widths are 20 and 27 inches• Available in 3 colors--black is the standard color, also available in blue and red• Sturdy locking mechanism included with roller cabinets• Accessories: hardwood tops, stainless steel tops, side cabinets

ID: D01243T1

Part No. Description Color

292-2359 30 inch Roller Cabinet Black

292-2363 30 inch Roller Cabinet Red

292-2364 30 inch Roller Cabinet Blue







Accessories

292-2371 Side Cabinet Black

292-2372 Side Cabinet Red

292-2373 Side Cabinet Blue

292-2380 Hardwood Top for 45 inch Roller Cabinet n/a

292-2381 Stainless Steel Top for 45 inch Roller Cabinet n/a

292-2422 Hardwood Top for 60 inch Roller Cabinet n/a

292-2423 Stainless Steel Top for 60 inch Roller Cabinet n/a


Tool Boxes CabinetsH

and Tools

292-2359 Roller Cabinet, 30 inch, Black292-2363 Roller Cabinet, 30 inch, Red292-2364 Roller Cabinet, 30 inch, Blue

Drawers Width Depth Height Cubic cm (in) Weight Load CapacityOverall 7 76.2 cm 70.49 cm 83.82 cm 410,594 cm 161 kg 1632.93 kg

(30 in) (27.75 in) (33 in) (25,056 in) (355 lbs) (3600 lbs)Drawer, (2.25 in) full width 5 66.04 cm 70.49 cm 5.72 cm

(26 in) (27.75 in) (2.25 in)Drawer, (3 in) full width 1 66.04 cm 70.49 cm 7.62 cm

(26 in) (27.75 in) (3 in)Drawer, (7 in) full width 1 66.04 cm 70.49 cm 17.78 cm

(26 in) (27.75 in) (7 in)292-2365 Roller Cabinet, 45 inch, Black292-2366 Roller Cabinet, 45 inch, Red292-2367 Roller Cabinet, 45 inch, BlueOverall 14 114.3 cm 70.49 cm 109.22 cm 716,131 cm 327 kg 1632.93 kg

(45 in) (27.75 in) (43 in) (43,701 in) (720 lbs) (3600 lbs)Drawer, (3 in) full width 1 114.3 cm 63.5 cm 7.62 cm

(40.5 in) (25 in) (3 in)Drawer, (2.25 in) 8 45.72 cm 63.5 cm 5.08 cm

(18 in) (25 in) (2 in)Drawer, (3 in) 4 45.72 cm 63.5 cm 7.62 cm

(18 in) (25 in) (3 in)Drawer 1 45.72 cm 63.5 cm 15.24 cm

(18 in) (25 in) (6 in)292-2368 Roller Cabinet, 60 inch, Black292-2369 Roller Cabinet, 60 inch, Red292-2370 Roller Cabinet, 60 inch, BlueOverall 13 152.4 cm 70.49 cm 109.22 cm 954,284 cm 372 kg 2177.24 kg

(60 in) (27.75 in) (43 in) (58,234 in) (820 lbs) (4800 lbs)Drawer, (3 in) full width 1 140.97 cm 63.5 cm 7.62 cm

(55.5 in) (25 in) (3 in)Drawer, () 7 63.5 cm 63.5 cm 5.72 cm

(25 in) (25 in) (2.25 in)Drawer, () 3 63.5 cm 63.5 cm 7.62 cm

(25 in) (25 in) (3 in)Drawer, () 1 63.5 cm 63.5 cm 8.89 cm

(25 in) (25 in) (3.5 in)Drawer, () 1 63.5 cm 63.5 cm 15.88 cm

(25 in) (25 in) (6.25 in)292-2365 Side Cabinet, Black292-2366 Side Cabinet, Red292-2367 Side Cabinet, BlueOverall 1 70.49 cm 30.48 cm 71.22 cm 153,448 cm 13.61 kg 45.36 kg

(27.75 in) (12 in) (28 in) (9,364 in) (30 lbs) (100 lbs)

Part No. Description Width Depth Height

292-2380 Hardwood Top for the 45 in Heavy Duty Cabinet 114.3 cm 71.22 cm 3.3 cm(45 in) (28 in) (1.3 in)

292-2381 Stainless Steel Top for the 45 in Heavy Duty Cabinet 114.3 cm 71.22 cm 3.81 cm(45 in) (28 in) (1.5 in)

292-2422 Hardwood Top for the 60 in Heavy Duty Cabinet 152.4 cm 71.22 cm 3.3 cm(60 in) (28 in) (1.3 in)

292-2423 Stainless Steel Top for the 60 in Heavy Duty Cabinet 152.4 cm 71.22 cm 3.81 cm(60 in) (28 in) (1.5 in)

01c.qxp 10/5/06 1:25 PM Page 79

Tool Storage UnitsWarranty: One Year

• 40 inch and 30 inch top chests have a top compartment—gas spring in 40 inch top chest and slide lock on 30 inch top chest allow top compartment to open easily

• Double-wall steel construction provides strength and durability to support loaded drawers so they stay level• Full length stiffener under the cover is welded to sides of the cover to provide the strongest top cover

available and to minimize racking• Extra deep drawer pulls give more finger room (almost 1 inch) to comfortably pull the drawer• Rolled edges on drawers add strength, rigidity, and safety• Ball-bearing slides provide extra weight support with smooth, one-hand operation• Ergonomic handle design provides comfortable gripping and ease of maneuvering• Gussets on corners improve cabinet strength so the cabinet stays square• Drawer liners included• Caster plates and weldnuts keep casters tight for smooth rolling—caster screws pass

through double thick steel plates and pre-threaded weldnuts

ID: D00503T1


214-6144 30 inch Roller Cabinet

214-6145 30 inch Top Chest

214-6146 30 inch Combo (Roller Cabinet and Top Chest) 1

214-6147 40 inch Roller Cabinet

214-6148 40 inch Top Chest

214-6149 40 inch Combo (Roller Cabinet and Top Chest) 1

214-7344 Side Cabinet (bulk)

214-7345 Side Cabinet (6 drawer)1 Combo part numbers available for sale only in North

and South America

Tool Box Accessories

Part No. Description Width Depth Height

Work Surfaces

223-3835 Laminated Press Board Top for the 76.2 cm (30 in) roller cabinet 76.2 cm (30 in) 50.80 cm (20.00 in) .97 cm (0.38 in)

223-3836 Laminated Press Board Top for the 101.6 cm (40 in) roller cabinet 101.6 cm (40 in) 50.80 cm (20.00 in) .97 cm (0.38 in)

223-3837 Butcher Block Top for the 134.62 cm (53 in) roller cabinet 134.77 cm (53.06 in) 49.38 cm (19.44 in) 4.45 cm (1.75 in)

Covers - black with CAT logo printed in yellow and white on the front of the cover

223-3832 Cover for the 76.2 cm (30 in) combo top chest and roller cabinet



Organizing Foam

246-7948 Organizing Foam for 214-6146 30 inch Combo for 222-7876 Student Tool Set

246-7950 Organizing Foam for 214-6149 40 inch Combo for 222-7876 Student Tool Set

Drawers Width Depth Height Cubic cm (in) Weight Load Capacity

214-6144 Roller Cabinet, 30 inch

Overall 7 74.93 cm 50.29 cm 102.36 cm 188911.6 cm 86.71 kg 508.48 kg(29.5 in) (19.8 in) (40.3 in) (11519 in) (191 lb) (1120 lb)

Drawer, 5.08 cm (2 inch) full width 2 61.47 cm 44.45 cm 4.06 cm 22222 cm(24.2 in) (17.5 in) (1.6 in) (1355 in)

Drawer, 10.16 cm (4 inch) full width 3 61.47 cm 44.45 cm 9.14 cm 75013.6 cm(24.2 in) (17.5 in) (3.6 in) (4574 in)




Cabinets Tool BoxesH

and

Tool

s

01c.qxp 10/5/06 1:25 PM Page 80

214-6145 Top Chest, 30 inch

Overall 4 74.93 cm 50.29 cm 49.28 cm 114603.2 cm 56.75 kg —(29.5 in) (19.8 in) (19.4 in) (6988 in) (125 lb)



Top Compartment 74.68 cm 47.50 cm 11.94 cm) 42377.6 cm(29.4 in) (18.7 in) (4.7 in (2584 in)

214-6147 Roller Cabinet, 40 inch

Overall 7 101.6 cm 50.29 cm 102.62 cm 270878.8 cm 127.12 kg 508.48 kg(40 in) (19.8 in) (40.4 in) (16517 in) (280 lb) (1120 lb)





214-6148 Top Chest, 40 inch

Overall 4 101.6 cm 50.29 cm 49.28 cm 161080.8 cm 83.54 kg —(40 in) (19.8 in) (19.4 in) (9822 in) (184 lb)



Top Compart. 101.35 cm 47.50 cm 11.94 cm 57514.8 cm(39.9 in) (18.7 in) (4.7 in) (3507 in)

214-7345 Six Drawer Side Cabinet

Overall 6 41.91 cm 50.04 cm 86.36 87428.4 cm 51.76 kg —(16.5 in) (19.7 in) (34 in) (5331 in) (114 lb)

Drawer, 5.08 cm (2 inch) 1 28.45 cm 44.45 cm 3.81 cm 4821.6 cm(11.2 in) (17.5 in) (1.5 in) (294 in)



214-7344 Bulk Side Cabinet

2 shelves 41.91 cm 50.04 cm 86.36 cm 181252.8 cm 34.05 kg —(16.5) (19.7 in) (34 in) (11052 in) (75 lb)


Tool Boxes CabinetsH

and Tools

01c.qxp 10/5/06 1:25 PM Page 81

4C-5912 Storage Chest

ID: C58301T1

Total capacity 4536 in3

Shipping weight 37.2 kg (82 lbs)

Drawers Width Depth Height

Chest 10 66.35 cm 33.02 cm 51.43 cm(261⁄8 in) (13 in) (201⁄4 in)

Drawer 6 17.78 cm 31.43 cm 4.76 cm(7 in) (123⁄8 in) (17⁄8 in)

1 17.78 cm 31.43 cm 15.55 cm(7 in) (123⁄8 in) (61⁄8 in)

2 59.69 cm 31.43 cm 4.76 cm(231⁄2 in) (123⁄8 in) (17⁄8 in)

1 59.69 cm 31.43 cm 9.84 cm(231⁄2 in) (123⁄8 in) (37⁄8 in)

Top 50.8 cm 32.06 cm 6.35 cmCompartment (251⁄2 in) (125⁄8 in) (21⁄2 in)

9S-1750 Chest

• 3 drawer, drop front tool chest• Weight: 17.69 kg (39 lbs),• Color: Red

ID: C79496T1

Drawers Width Depth Height

Chest 3 60.96 cm 26.67 cm 29.84 cm(24 in) (101⁄2 in) (113⁄4 in)

Drawer 1 55.88 cm 22.86 cm 3.81 cm(22 in) (9 in) (11⁄2 in)

1 55.88 cm 22.86 cm 5.08 cm(22 in) (9 in) (2 in)

1 55.88 cm 22.86 cm 8.73 cm(22 in) (9 in) (37⁄16 in)

Top 60.80 cm 24.92 cm 8.25 cm1

Compartment (2315⁄16 in) (913⁄16 in) (31⁄4 in)1

1 Includes height of lid

174-9802 Six-Drawer Tool Chest, Black188-2095 Six-Drawer Tool Chest, Orange

• Tough construction — rigid three-piece cap end, eight added stiffeners to ensure strength, gasketed cover and watershed hinge, internally riveted to protect rivets from rust, and a three point locking system

• Slides are 17% wider than average tool chests for added strength and durability• Slides are formed from one piece of steel to eliminate fasteners, and no special tool is needed to move slides• Superior black electrostatic finish on 174-9802; orange finish on 188-2095• Drop-front cover lifts to 180 degrees (helps eliminate pinched fingers when closing)• Top drawer size is more compatible with standard size hand tools and includes drawer liners and dividers

ID: C79620T1

Overall size 66.0 x 35.1 x 41.9 cm (26.0 x 13.8 x 16.5 in)

Compartment size 64.8 x 32.0 x 10.2 cm (25.5 x 12.6 x 4.0 in)

Three-drawer size 16.0 x 30.2 x 4.6 cm (6.3 x 11.9 x 1.8 in)

Two-drawer size 54.1 x 30.2 x 4.6 cm (21.3 x 11.9 x 1.8 in)

One-drawer size 54.1 x 30.2 x 7.1 cm (21.3 x 11.9 x 2.8 in)

Weight 36 kg (79 lbs)

Storage capacity 53,389 cubic centimeters (3,528 cubic inches)

174-9803 Lock

• Fits 174-9802 and 188-2095 Tool Chests• Lock with two keys


Metal Storage Chests / Lock Tool BoxesH

and

Tool

s

ID: D00119T1

01c.qxp 10/5/06 1:25 PM Page 82

ID: C79420T1

ID: D00678T1

248-2283 Tool Bag with Carrying StrapWarranty: One Year

• Nine pockets and ten tool-holding loops on the outside• Twelve pockets on the inside for holding additional tools• Material: cloth• Length: 0.61 m (24 in)

9U-6219 Tool Box

• Black, steel construction• Dimensions: 508 mm (20 in) long by 219.08 mm (8.63 in) wide

by 219.08 mm (8.63 in) high• Tote tray included

239-2297 Tool Box

• Dimensions: 647.7 mm (25.5 in) long by 152.4 mm (6 in) wide by 139.7 mm (5.5 in) high

• Fold-down handle• Material: steel

Drawer Liner Kits

• Protects drawers, tools, and deadens sound• 1.6 mm (1⁄16 in) thick oil resistant black foam


4C-3015 7 sheets, 72.4 cm W x 45.7 cm D (271⁄2 in x 18 in)

4C-3016 8 sheets, 91.8 cm W x 58.4 cm D (361⁄8 in x 23 in)

5P-4724 Lock Kit

• Fits 9S-1750 Tool Chest and discontinued 5F-4763 Tool Chest

ID: C27098T1

Metal Storage Boxes with Hinged Lids and Socket Trays

StorageName Part No. Length Width Height Capacity (in3) Color

Box 8S-1602 213.36 mm (8.4 in) 101.6 mm (4.0 in) 38.1 mm (1.5 in) 50.6 Orange

Box 2P-8306 381 mm (15.0 in) 287.02 mm (11.3 in) 76.2 mm (3.0 in) 506.3 Orange

Box 5P-0946 457.2 mm (18.0 in) 254 mm (10.0 in) 127 mm (5.0 in) 900.0 Orange

Box 9S-6332 508 mm (20.0 in) 381 mm (15.0 in) 101.6 mm (4.0 in) 1200.0 Orange

Box 9S-1725 159.5 mm (6.28 in) 103.12 mm (4.06 in) 25.4 mm (1.0 in) N/A Red

Box 5S-6092 788.67 mm (31.06 in) 317.5 mm (22.50 in) 146.05 mm (5.75 in) N/A Red


Tool Boxes MiscellaneousH

and Tools

01c.qxp 10/5/06 1:25 PM Page 83

ID: D00307T1

ID: D00313T1

ID: C80378T1

236-5137• Three levels of storage• Tub is sized to hold most drills and many small power tools• Tote tray allows for easy access to hand tools like hammers and

screwdrivers • Compartments in top tray for

organizing small parts and supplies

• Tote and top tray have molded handles to carry separately

• V-groove in lid holds pipes and dowels for sawing

• Dimensions:406 x 229 x 318 mm (16.3 x 9.0 x 12.5 in)

• Weight: 2 kg (4.4 lbs)

202-8643• Plastic, water-tight container (will not rust or scratch like metal boxes)• Dimensions (width x height x depth):

514.4 x 212.7 x 225.4 mm (20.25 x 8.37 x 8.87 in) • Color: gray• Tool box capacity:

9 kg (20 lbs)• Tool box decal:

NEEG2916

Plastic Tool Boxes236-5133• 3 Tiers including a jumbo tub sized to hold circular saws and other large

items • Large tote tray will store drills, extension cords and other bulky supplies • Top tray has eight compartments for organizing hand tools, fasteners and

supplies • V-groove in lid holds pipes and dowels in place for sawing • Includes durable caddy with retractable telescoping handle • Two large wheels for rolling over various indoor and outdoor surfaces• Dimensions: 670 x 395 x 429 mm (26.4 x 15.6 x 16.9 in)• Weight: 8 kg (17.6 lbs)

ID: D00295T1

236-5134• 3 Tiers including a jumbo tub sized to hold circular saws and other large

items • Large tote tray will store drills, extension cords and other bulky supplies • Top tray has eight compartments for organizing hand tools, fasteners and

supplies• V-groove in lid holds pipes and dowels in place for sawing• Dimensions: 526 x 344 x 426 mm (20.7 x13.5 16.8 in) • Weight: 5 kg (11 lbs)

ID: D00301T1

236-5135• Two steel latches mean extra strength while carrying box• Removable plastic tote tray for organizing small tools and supplies• Durable design and lightweight• Comfort-grip handle for ease in carrying• Dimensions: 504 x 216 x 225 mm (19.9 x 8.5 x 8.9 in) • Weight: 2 kg (4.4 lbs)

ID: D00319T1

236-5136• Large tray for holding most tools • Clear top parts storage compartments for organizing small parts • Tub Is sized to hold most drills and most power tools • Tote tray allows for easy access to hand tools like hammers and

screwdrivers • High performance latches for locking • Lockable to secure valuables (padlock not included)• Dimensions: 406 x 229 x 331 mm

(17.3 x 9.0 x 13.0 in)• Weight: 3 kg (6.6 lbs)


Plastic Tool Boxes Tool BoxesH

and

Tool

s

01c.qxp 10/5/06 1:25 PM Page 84

178-2212 Case178-2213 Dividers

• Uses include organizing fastener groups and other small reusable items such as nuts, bolts, washers• Convenient to transport to a field site due to compact size• Overall case dimensions: 457 x 305 x 76 mm (18.0 x 12.0 x 3.0 in)• Dividers can partition case to a maximum of 48 bins• Dividers in packages of 12 each

ID: C80066T1

Plastic Storage Cases with Hinged Lids

• Impact-resistant• Textured surface to prevent scratches

ID: C80491T1

A

C

D

E

B

Part No. Length A Exterior Length B Exterior Overall Length C Lid Depth D Base Depth E Handle No. Of Color& Interior & Interior Exterior & Interior Exterior & Interior Exterior & Interior Latches

4C-4730 660mm (26.00 in), 421mm (16.56 in), 114 mm (4.50 in), 23 mm (0.90 in), 84 mm (3.31 in), Yes Two Gray622 mm (24.50 in) 330 mm (13.00 in) 102 mm (4.00 in) 20 mm (0.78 in) 79 mm (3.12 in)

6V-9449 470 mm (18.50 in), 395 mm (15.56 in), 203 mm (8.00 in), 102 mm (4.00 in), 101 mm (3.96 in), Yes Two Black432 mm (17.00 in) 330 mm (13.00 in) 187 mm (7.38 in) 89 mm (3.50 in) 82.5 mm (3.25 in)

6V-7145 470 mm (18.50 in), 395 mm (15.56 in), 127 mm (5.00 in), 43 mm (1.70 in), 84 mm (3.31 in), Yes Two Black432 mm (17.00 in) 330 mm (13.00 in) 114 mm (4.50 in) 35 mm (1.38 in) 79 mm (3.12 in)

8T-0841 394 mm (15.50 in), 311 mm (12.25 in), 191 mm (7.50 in), 95 mm (3.75 in), 95 mm (3.75 in), Yes Two Black356 mm (14.00 in) 273 mm (10.75 in) 175 mm (6.88 in) 83 mm (3.27 in) 92 mm (3.63 in)

4C-3975 394 mm (15.50 in), 311 mm (12.25 in), 140 mm (5.50 in), 44 mm (1.75 in), 95 mm (3.75 in), Yes Two Black356 mm (14.00 in) 273 mm (10.75 in) 127 mm (5.00 in) 35 mm (1.38 in) 92 mm (3.63 in)



148-5675 216 mm (8.50 in), 198 mm (7.81 in), 90 mm (3.56 in), 20 mm (0.78 in), 70 mm (2.75 in), No One Black192 mm (7.56 in) 149 mm (5.88 in) 83 mm (3.25 in) 17 mm (0.67 in) 66 mm (2.60 in)

6V-6045 191 mm (7.50 in), 102 mm (4.00 in), 41 mm (1.63 in), 10 mm(0.38 in), 31 mm (1.25 in), No One Black173 mm (6.81 in) 81 mm (3.19 in) 33 mm (1.31 in) 3 mm (0.13 in) 30 mm (1.19 in)

6V-3112 254 mm (10.00 in), 191 mm (7.50 in), 30mm (1.18 in), — — No None Black238 mm (9.38 in) 170 mm (6.69 in) 24 mm (0.94 in)


Tool Boxes CasesH

and Tools

Foam Block for Plastic Storage CasesPart No. Length Width Thickness Material Color Convoluted

6V-6105 350.52 mm (13.8 in) 254 mm (10.0 in) 12.7 mm (0.5 in) Etherfoam1 Charcoal No

8S-5128 520.7 mm (20.5 in) 223.52 mm (8.8 in) 50.8 mm (2.0 in) Esterfoam2 Charcoal Yes

2P-8289 457.2 mm (18.0 in) 254 mm (10.0 in) 50.8 mm (2.0 in) Esterfoam2 Charcoal Yes

6V-4094 279.4 mm (11.0 in) 170.18 mm (6.7 in) 38.1 mm (1.5 in) Esterfoam2 Charcoal Yes

9S-8105 482.6 mm (19.0 in) 431.8 mm (14.0 in) 38.1 mm (1.5 in) Ethafoam3 Charcoal Yes

3P-1549 386.08 mm (15.2 in) 279.4 mm (11.0 in) 12.7 mm (0.5 in) Ethafoam3 Black No

6V-6126 365.76 mm (14.4 in) 276.86 mm (10.9 in) 73.66 mm (2.9 in) Ethafoam3 Black No



8T-3153 322.58 mm (12.7 in) 238.76 mm (9.4 in) 10.16 mm (0.4 in) Ethafoam3 Black No



148-5677 165 mm (6.5 in) 200 mm (7.9 in) 38 mm (1.5 in) Etherfoam1 Charcoal No1 Lightweight 2 General purpose 3 Dense

01c.qxp 10/5/06 1:25 PM Page 85

Plastic Divided Utility Boxes with Hinged Lids

• Heavy-duty plastic boxes for organizing, storing, and protecting small parts• Yellow polypropylene material—resistant to oils, solvents and common chemicals• Rustproof, dentproof, spark proof, and non-conductive

ID: C41276T1

Number ofPart No. Length Width Thickness Color Compartments Size

4C-3722 332.74 mm 228.60 mm 58.42 mm Yellow 12 50.80 x 104.14 mm(13.10 in) (9.00 in) (2.30 in) (2.00 x 4.10 in)


12 50.80 x 50.80 mm(2.00 x 2.00 in)



6 50.80 x 104.14 mm(2.00 x 4.10 in)


1 104.14 x 104.14 mm(4.10 x 4.10 in)

1 104.14 x 317.50 mm(4.10 x 12.50 in)

4C-4783 381 mm 298.5 mm 63.50 mm Gray/See-through 9-24 15 Removable (15.00 in) (11.75 in) (2.50 in) Smoke Gray Dividers

4C-4787 177.80 mm 95.3 mm 31.75 mm Opaque 8 35.05 x 41.15 mm(7.00 in) (3.75 in) (1.25 in) (1.38 x 1.62 in)

1 28.45 x 82.55 mm(1.12 x 3.25 in)

4C-4789 209.55 mm 114.3 mm 35.05 mm Opaque 12 31.75 x 50.80 mm(8.25 in) (4.50 in) (1.38 in) (1.25 x 2.00 in)

6V-3007 332.74 mm 220 mm 58.42 mm Opaque 13 50.80 x 50.80 mm(13.10 in) (8.66 in) (2.30 in) (2.00 x 2.00 in)

1 50.80 x 158.75 mm(2.00 x 6.25 in)

1 50.80 x 212.85 mm(2.00 x 8.38 in)

1 104.65 x 104.65 mm(4.12 x 4.12 in)

152-7997 470 mm 332 mm 77 mm Yellow 21 —(18.5 in) (13.07 in) (3.03 in)

ID: C80500T1

4C-47836V-30074C-4463

4C-37254C-37244C-37234C-3722

4C-4787

Sample Configurations


Cases Tool BoxesH

and

Tool

s

01c.qxp 10/5/06 1:25 PM Page 86

ID: D01177T1


Tool Boxes CasesH

and Tools

Outside Inside Shipping Replacement ReplacementPart No. Description Dimensions Dimension Weight Weight Foam Set O-Ring

4C-9650 1 Pelican Mini “S” Case™ 273 mm L x 247.7 mm W x 127 mm D 241 mm L x 191 mm W x 114 mm D .91 kg 1.36 kg 4C-9651, 4C-9739(Fold-down handle) (103⁄4 in L x 93⁄4 in W x 5 in D) (91⁄2 in L x 71⁄2 in W x 41⁄2 in D) (2 lbs) (3 lbs) 3 Pc.

4C-9652 Pelican Mini “D” Case™ 273 mm L x 247 mm W x 177.8 mm D 241 mm L x 191 mm W x 165 mm D 1.13 kg 1.59 kg 4C-9653, —(103⁄4 in L x 93⁄4 in W x 7 in D) (91⁄2 in L x 71⁄2 in W x 61⁄2 in D) (21⁄2 lbs) (31⁄2 lbs) 3 Pc.

4C-9654 Pelicase™ 343 mm L x 327 mm W x 152 mm D 311 mm L x 235 mm W x 133 mm D 1.8 kg 2.5 kg 4C-9655, 4C-9741(131⁄2 in L x 127⁄8 in W x 6 in D) (121⁄4 in L x 91⁄4 in W x 51⁄4 in D) (4 lbs) (51⁄2 lbs) 3 Pc.

4C-9656 Pelican Case™ 470 mm L x 387 mm W x 175 mm D 432 mm L x 299 mm W x 152 mm D 3.2 kg 3.9 kg 4C-9657, 4C-9742(181⁄2 in L x 151⁄4 in W x 67⁄8 in D) (17 in L x 113⁄4 in W x 6 in D) (7 lbs) (81⁄2 lbs) 3 Pc.

4C-9658 1 Pelican Pro Case™ 521 mm L x 425 mm W x 216 mm D 483 mm L x 356 mm W x 197 mm D 4.5 kg 6.2 kg 4C-9659 4C-9743(Fold-down handle) (201⁄2 in L x 163⁄4 in W x 81⁄2 in D) (19 in L x 14 in W x 73⁄4 in D) (10 lbs) (14 lbs) 4 Pc.

4C-9660 King Pelican Case™ 591 mm L x 527 mm W x 229 mm D 559 mm L x 432 mm W x 203 mm D 6 kg 11.5 kg 4C-9661 4C-9744(231⁄4 in L x 203⁄4 in W x 9 in D) (22 in L x 17 in W x 8 in D) (13 lbs) (17 lbs) 4 Pc.

4C-9662 Pelican Travel Vault II™ 940 mm L x 445 mm W x 152 mm D 914 mm L x 343 mm W x 127 mm D 6.8 kg 7.7 kg 4C-9663, 4C-9745(37 in L x 171⁄2 in W x 6 in D) (36 in L x 131⁄2 in W x 5 in D) (15 lbs) (17 lbs) 3 Pc.

4C-9664 2 Pelican Travel Vault™ 1321 mm L x 445 mm W x 152 mm D 1289 mm L x 323 mm W x 127 mm D 11.8 kg 13 kg 4C-9665 4C-9746(52 in L x 171⁄2 in W x 6 in D) (503⁄4 in L x 131⁄2 in W x 5 in D) (26 lbs) (29 lbs) 3 Pc.

1 Fold-down handle.2 Supplied with regular foam; Pick-N’Pluck is not available

Protector Cases—Pelican LineWarranty: Manufacturer’s

• Make an excellent lockable storage vault when equipment is not in use—just apply a lock• Strong, double-throw latches—easier to open with a light pull• Watertight, airtight, dustproof — Pelican cases feature an exclusive 6.5 mm (1⁄4 in) neoprene “O” ring, to guarantee a perfect seal.

Neither dust nor water can penetrate this barrier to harm your equipment. These cases are so airtight and watertight they float even when loaded. The “O” ring is easily replaced if damaged.

• Purge valve — The exclusive built-in “O” ring purge valve is sealed for pressure allowing for quick equalization after changes in altitude or temperature.

• Dentproof — The tough, cushioned, protective shell eliminates damage from bumping, jarring, and even airline shipments• Protect contents inside — Multiple layers of industrial grade photographic foam secure and cushion equipment• Custom fit for tooling — The “Pick-N’Pluck” center foam section is prescored for quick and clean custom fitting.

The case lid is lined with the same convoluted foam for maximum shock protection• Lightweight — easy to carry by using the comfortable, molded handle (4C-9650 and 4C-9658 have fold-down handles.)• All cases are gray

01c.qxp 10/5/06 1:25 PM Page 87

ID: C66834T1

ID: C80064T1

Slings

137-4370 Leveling AssemblyModel: 994 and 994D with 3512 Engines and other similar applicationsWarranty: Manufacturer’s Two Year Limited

European Union compliant, CE marked• Saves time by eliminating constant readjustment (raising and lowering) of lifting device to obtain a stable, level load• Designed for engine use — can also be used on transmissions or other similar applications• Used to adjust and keep load level during lifting procedures by retracting or extending hydraulic cylinder on leveling beam• Adjusts center of gravity while load is suspended from overhead crane or other suitable device• Allows small adjustments to keep a load level at all times• Connects to overhead lifting hoist system for lifting heavy loads• Uses a heavy-duty air over hydraulic system• Includes a remote operation air hydraulic switch with a 7.62 m (25.0 ft) cable• ASME B30.9, ANSI 120.74; Australian Standards AS1353.1 and AS1353.2 compliant

Repair InformationSPX Service Solutions655 Eisenhower Dr.Owatonna, MN 55060

Phone: (800) 628-6496

Capacity 13,608 kg (30,000 lbs)

Length 2997 mm (118.0 in)

Width 289 mm (11.4 in)

Height 1125.5 mm (44.31 in)

Load Positioners and Warning TagWarranty: Warning Tag: Six Months; Load Positioners: Manufacturer’s


Load Positioners• Used with a crane or hoist• Useful for tilting heavy or bulky assemblies

in confined areas• Not for use in overhead lifting• 138-7575 Link Bracket (two) is part

of 9S-9101 and 9S-9100

ReferenceNEHS0823 Tool Operating Manual

ID: A92061T1

Load Positioners

9S-9101 9S-9100

Load capacity 4000 lb 2000 lb

Chain size 5⁄16 in 1⁄4 in

Chain length 62 in 54 in

Chain grade (ASTM) 43 43

Gear ratio 82-1 34-1

Drive size 5⁄8 in Hex 5⁄8 in Hex


Slings SlingsH

and

Tool

s

ReferenceRENR2018-00, 3516B Engine Supplementfor 994D Wheel Loader

ID: C80390T1

GRADE 43 CHAIN�

NOT FOR USE IN�

OVERHEAD LIFTING

205-5688 Warning Tag• Used to warn technician against using load positioner for overhead lifting• Attach tag to all 9S-9100 and 9S-9101 Sling Assemblies (load positioners)

currently in use; required because the chain is grade 43• Can be ordered free-of-charge

Working MinimumPart No. Bolt Size Load Limit Bolt Torque

163-6455 36 mm 5448 kg (12,000 lbs) 2700 N·m (2000 lb ft)

138-7576 30 mm (11⁄4 in) 4000 kg (9000 lbs) 1300 N·m (1300 lb ft)

138-7574 (3⁄4 in) 4000 kg (9000 lbs) 360 N·m (265 lb ft)

138-7575 (1⁄2 in) 1800 kg (4000 lbs) 95 N·m (70 lb ft)

138-7573 (3⁄8 in) 1000 kg (2250 lbs) 43 N·m (32 lb ft)

Link BracketsSMCS Code: 7063-017, 7063-010, 0632Model: 5000 Series Mining Excavators and General Usage

• Used to remove or install large components such as excavator swing gears (provides acceptable method of attaching hoist to component)

• 138-7575 Link Bracket is used specifically to remove and install swing gear and bearing assembly on 5130 and 5230 Mining Excavators

• All link brackets meet ANSI Standards for lifting devices.• Bolts directly onto swing bearing/gear or other component (always use Grade 8 bolts

to attach link bracket to component)• Requires less clearance than standard eye bolt and makes placement/alignment

of swing gear/bearing much faster and simpler• Used for any general purpose lifting where bracket can be attached to component• These link brackets are 100% proof tested at two times the working load limit.

They comply with the requirements of ANSI/ASME B30.9-1984 as noted on the Certificate of Proof Test contained with each piece.

ReferenceSEHS9721 Special Instruction, Assembly Procedure for Hydraulic Excavator (5130 only)

01c.qxp 10/5/06 1:25 PM Page 88

Lifting CapacityPart No. Description Length Width Vertical Basket Choker

140-7738 1 Fabric Sling 2.4 m (8.0 ft) 100 mm (4.0 in) 9,000 kg (20,000 lb) 18,000 kg (40,000 lb) 7,200 kg (16,000 lb)




140-7742 3 Protective Sleeve 600 mm (24.0 in) 250 mm (10.0 in) — — —1 For use in all markets except Europe and Australia2 Required for use in Europe and Australia3 Recommended for use with all Fiber Slings


Slings SlingsH

and Tools

143-8695 Shackle (Synthetic Sling Saver)

Working load limit 18,600 kg (41,000 lb)

Throat width 54 mm (2.1 in)

Outside length 248 mm (9.8 in)

Maximum sling width 114 mm (4.5 in)

Inside depth 146 mm (5.8 in)

Outside width 191 mm (7.5 in)

Pin diameter 38 mm (1.5 in)

Weight 8.5 kg (18.7 lb)

Material Alloy steel with threaded screw pin

143-8698 Shackle Spool (Synthetic Sling Saver)

Outside diameter 63.5 mm (2.5 in)

Width 47.8 mm (1.88 in)

Inside diameter 41.4 mm (1.63 in)


Material alloy steel

143-8699 Shackle Link Plate (Synthetic Sling Saver)

Working load limit 18,600 kg (41,000 lb)

Thickness 44.5 mm (1.75 in)

Width 76.2 mm (3.0 in)

Length 177.8 mm (7.0 in)

Hole diameter 41.2 mm (1.62 in)

Distance between holes 95.2 mm (3.75 in)


Material alloy steel

ID: C78495T1

140-7742

Fiber Optic ”Tell Tail“ Cord

”Tell Tail“ Cords (shock/overload)

Typical Fabric Sling

ID: C78496T1

143-8695

143-8699

143-8698

Fabric Slings, Protective Sleeve, and ShacklesSMCS Code: 7500-010, 0632 7258-010, 7960Model: 769, 773, 777, 785, 789, and 793 Off-Highway Trucks and General UsageWarranty: Fabric Slings: M; Shackle, Spool, and Plate: G

European Union Compliant, CE marked (140-7738, 140-7741)• Used to lift truck bodies or other loads with a hoist or other lifting devices (provides strength of steel

without drawbacks of weight, corrosion, or electrical conductivity)• Reduces number of people required to perform a lift — fiber slings are up to 90% lighter than other

rigging materials, can be easily handled by a single person, stored easily, do not require lubrication or reannealing like wire rope or chains, and will not scratch or mar surfaces that they contact

• Helps reduce injuries to mechanics such as hand punctures, pinching, back strain, etc., caused by heavy metal chains and hooks

• Slings provide a high-performance but low-cost method of lifting loads using vertical, basket, and choker-type hitches.• Slings provide the most inspectable lifting device by using double layered, contrasting colors and two types

of visible “Tell Tail” cords to indicate damage.• Added protection can be gained by using a 140-7742 Protective Sleeve when slings are used in severe applications

(made of the same bulked nylon material as the outer tubes).• Sleeves feature velcro closures for easy installation and removal from slings.

Construction• Made from two complete and separate slings (cords), combined into one (provides unique back-up system in case

of failure of either cord)• Inner load carrying cords are constructed of interwoven high performance fibers which provide excellent chemical

resistance and have less than 1 percent elongation at working load.• Separate inner cords are encased in a double-walled fabric tube — inner tube is made of polyester while outer tube

is made of a bulked, abrasion-resistant nylon.• All slings are labeled with model number, serial number, length, load capacities, and warnings.

Safety• 140-7738 and 140-7741 Slings meet all applicable national, international, and industry standards, including,

but not limited to: ASME B30.9, ANSI 120.74, and Japanese standards.• 141-0288 and 141-0289 Slings meet all applicable national, international, and industry standards, including,

but not limited to: CE Certification and Australian Standards AS4497.1 and AS4497.2.• Contrasting color coded slings provide extra protection and early warning (if red inner tube or cords are visible,

the sling should be immediately removed from service and repaired by manufacturer).• Two “Tell Tail” cords are used as an indicator of shock or overloading of sling (cords should protrude 13 mm (.5 in)

beyond label tag and if shorter, sling should be returned to manufacturer for evaluation).• A “Fiber Optic Tell Tail” cord is used to determine if inner core fibers are damaged or broken — if light from one end of cord

will not shine through to opposite end, the sling is probably damaged and should be returned to manufacturer for evaluation.• All slings are proof-tested to twice their rated capacity.

Hardware• A shackle is used to attach hooks, links, chains, or other lifting systems to fabric slings.• Shackle’s extra wide contact area gives increased load distribution to sling fabric and allows sling to achieve

up to 100 percent of its rated load lifting capacity.• A spool keeps the loaded hook centered on the shackle pin and spreads lifting load evenly across pin.• A link plate allows attachment of two shackles to lifting hook.

ReferenceSpecial Instruction: REHS0033, 777D Off-Highway Truck; SEHS9980, 793C Off-Highway Truck; SEHS9992, 769D/771D Off-Highway Truck; SEHS9993 773D/775D Off-Highway Truck

01c.qxp 10/5/06 1:25 PM Page 89

Nylon Lifting Slings

WARNINGInspect sling for damage before each use and remove from service ifdamaged. Do not overload, cut, or expose to temperatures above 82°C (180°F).Use of damaged sling may result in personal injury.

Rated Sling Eye No. of Capacity

Part No. Length Width Length Body Plys Choker Vertical Basket

Endless Slings (Type V)

1U-8221 3 ft 1 in — 1 2,480 lb 3,100 lb 6,200 lb

1U-8222 4 ft 1 in — 1 2,480 lb 3,100 lb 6,200 lb

1U-8223 6 ft 1 in — 1 2,480 lb 3,100 lb 6,200 lb

1U-8224 8 ft 1 in — 1 2,480 lb 3,100 lb 6,200 lb

1U-8225 6 ft 2 in — 1 4,960 lb 6,200 lb 12,400 lb

1U-8226 8 ft 2 in — 1 4,960 lb 6,200 lb 12,400 lb

1U-8227 10 ft 2 in — 1 4,960 lb 6,200 lb 12,400 lb

1U-8228 6 ft 3 in — 1 7,440 lb 9,300 lb 18,600 lb

1U-8229 8 ft 3 in — 1 7,440 lb 9,300 lb 18,600 lb

1U-8230 10 ft 3 in — 1 7,440 lb 9,300 lb 18,600 lb

1U-8231 8 ft 4 in — 1 9,920 lb 12,400 lb 24,800 lb

1U-8232 10 ft 4 in — 1 9,920 lb 12,400 lb 24,800 lb

1U-8233 12 ft 4 in — 1 9,920 lb 12,400 lb 24,800 lb

Eye and Eye Slings (Type III)

1U-8234 3 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb

1U-8235 4 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb

1U-8236 6 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb

1U-8237 8 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb

1U-8238 10 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb

1U-8239 12 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb

1U-8240 4 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb

1U-8241 6 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb

1U-8242 8 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb

1U-8243 10 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb

1U-8244 12 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb

1U-8245 14 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb

1U-8256 6 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb

1U-8257 8 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb

1U-8258 10 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb

1U-8259 12 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb

Eye and Eye Slings (Tapered Eyes) (Type III)1

1U-8246 8 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb

1U-8247 10 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb

1U-8248 12 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb

1U-8249 14 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb

1U-8250 16 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb

1U-8251 10 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb

1U-8252 12 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb

1U-8253 14 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb

1U-8254 16 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb

1U-8255 18 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb

1U-8260 10 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb

1U-8261 12 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb

1U-8262 14 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb

1U-8263 16 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb

1 On wider slings, tapered eyes provide a configuration designed for easier use with chain hooks.

5P-4153 SlingSMCS Code: 4200-010Model: Most Caterpillar Models

• Used to properly lift and handle Caterpillar beadless carcass or conventional tires

• Single-ply, webbed nylon sling with many general purpose usages

ID: A10264T1

Lifting Capacity

Choker hitch 2300 kg (5,200 lbs.)

Basket hitch 4500 kg (10,000 lbs.)


Slings SlingsH

and

Tool

s

01c.qxp 10/5/06 1:25 PM Page 90


Shop SuppliesAbrasive

Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

Metal CuttingDrills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28Taps and Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37Cutting Torch Equipment . . . . . . . . . . . . . . . . . . . . . . . . 2-48Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48

Caps and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49

Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-56

Battery Service Equipment . . . . . . . . . . . . . . . . . . . . . 2-59

Vehicular Caterpillar® Batteries and Worklights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-64

Lighting/Electrical ProductsFlashlights and Batteries . . . . . . . . . . . . . . . . . . . . . . . . 2-67Work Lights and Extension Cords . . . . . . . . . . . . . . . . . 2-70Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-76

Personal/SafetyFirst Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-78Personal Protection Items . . . . . . . . . . . . . . . . . . . . . . . . 2-80Hand Protection — Gloves . . . . . . . . . . . . . . . . . . . . . . . 2-92Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-97Chemical Spill Protection . . . . . . . . . . . . . . . . . . . . . . . . 2-98Towels and Wiper Products . . . . . . . . . . . . . . . . . . . . . . 2-104Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-108

Disposal and Storage Products for Hazardous Material . . . . . . . . . . . . . . . . . . . . . . . . 2-115

Material Handling, Storage, Packaging, and ShippingTape and Tape Dispensers . . . . . . . . . . . . . . . . . . . . . . . 2-116Packaging Material and Accessories . . . . . . . . . . . . . . . 2-120Janitorial Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-126Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-127

Hardware and Seal Kits . . . . . . . . . . . . . . . . . . . . . . . . 2-128

02a.qxp 10/5/06 1:25 PM Page i

02a.qxp 10/5/06 1:25 PM Page ii

Brushes

Abrasives — Safety and StorageSafetyTo avoid injury always wear impact-resistant protective glasses, full face shield,safety shoes, arm guards, leather gloves and apron for all grinding operations.

For Abrasive Disc Grinding:• Never grind without a proper backup pad.• Never use another grinding disc as backup pad.• Never use a larger diameter disc than specified by manufacturer.• Check all backup pads for signs of irregularities. Check for concentricity.

Do not exceed maximum RPM.• Always use the grinder’s safety pad. Check spindle for wobble.• Check disc retainer nut for thread wear. Check for snug fit and full

three-thread contact (except with quick change or non-wrench systems).For Abrasive Belt Grinding and Polishing:• Never run an abrasive belt on unfamiliar machinery.• Inspect for safe operating conditions: the abrasive belt, idler assembly

and contact wheel should be enclosed within sheet metal hood; adjustabledeflector should be installed within 1⁄4 inch of abrasive belt working surface;use adequate exhaust system; employ special precautions with inflammable or other hazardous materials.

• Use workpiece fixture whenever possible.• Always check: grinder spindle for run-out (wobble); contact wheel for balance,

face trueness and run-out; idler pulley spindle for run-out and balance.

Proper Storage of Coated AbrasivesFollow these guidelines to prolong life and maintain the efficiency of coatedabrasives.

• Keep stockroom at constant levels of humidity (35-50%) and temperature[12.8-21.1°C (55-70°F)].

• Keep cartons away from damp or cold walls and floor where they may absorb moisture.

• Store coated abrasives away from any heat source.• Keep products in original packages for easy handling and stacking.• Store bulk rolls flat on shelves or pallets — not on edge.• Belts removed from packing case should be rolled up and stood on edge on a

clean shelf. They may be draped over a large cylinder but NEVER hang a beltfrom a nail or peg (the backing will crease and the abrasive may crack).

• Precondition coated abrasive product in a chamber of controlled temperatureand humidity before use for maximum efficiency.

Brushes — Safety RequirementsAll operators must read this information thoroughly and completely before usingthe brush.

Operators and Work AreaOsborn Power Brushes are built to rigid manufacturing specifications that combinethe finest in design, materials and workmanship. The product you receive will giveyou maximum work performance, and safe operation if used properly.

All power brushes, like other rotating cutting tools, demand that certainoperating precautions be observed to assure operator and work area safety.InspectionBrushes should be carefully checked when removed from original carton. Do notuse if rusted or damaged.

Storage and HandlingStore brushes in original boxes. Wire brushes should not be exposed to heat, highhumidity, acids, fumes or liquids that can result in deterioration of wire filaments,and subsequently, premature failure of the wires. Also, check for distortion of brushfill that can cause imbalance and excessive vibration when brush is run. Do notallow foreign material to accumulate in brush face.

Machine ConditionProper maintenance of machines is essential to keep them in safe operating condition.Special operating instructions furnished with a machine should be closely followed.Hoods and safety guards must be kept in place at all times. Use adequate spindlediameter for the brush — do not use brush larger than the machine was designed for.Brushing machines should have sufficient power to maintain rated spindle speeds.

Provide proper ventilation and/or exhaust systems on all brushing operations.

Mounting BrushesBrushes should be inspected for rust, oxidation and other damage. Do not use thebrush if it is not in good condition. Check spindle speed RPM. Do not mount andoperate brush if spindle RPM exceeds MAXIMUM SAFE FREE SPEED (MSFS) forwhich brush is rated.

Brush arbor hole and spindle diameter should be the same for free fit. Spindlelength should be sufficient to permit a full nut mounting. Direction of spindle nutthread should be in such relation to the direction of rotation that the nut will tendto tighten as spindle revolves. When flanges are used, they should be identical insize and radial bearing surface to avoid cross-bending pressure on the brush.

Work RestOn single or double end pedestal machines, work rests of rigid and adjustabledesign should be used to support the work piece while brushing Adjust the workrest for a maximum opening of 1⁄8 inch to the brush face. This will prevent the workfrom being forced between the brush and rest. The work rest should be adjustedonly when the brush is not in motion.

SpeedMAXIMUM SAFE FREE SPEED (MSFS) is the maximum RPM at which the brushshould be operated with no work applied (spinning free). It is not the recommendedoperating speed. The application determines the recommended operating speed,which should never exceed the MSFS brush ratings marked on the brush and/orshown in this catalog. Periodic speed checks of the spindle are the responsibilityof the operator and user.

In all cases where MSFS is not indicated, and on special brushes, contact ShopSupplies and Tools Group for specific operating speed details.

Protective EquipmentThe potential of serious injury exists for both the brush operator and others in the work area (possibly 50 or more feet from the brush). To protect against thishazard, before rotating the brush, during rotation, and until rotation stops operatorsand others in the area must wear SAFETY GOGGLES or FULL FACE SHIELDS WORNOVER SAFETY GLASSES WITH SIDE SHIELDS. Comply with the requirements ofANSI Z87.1-1979 “Occupational Eye and Face Protection.”

Appropriate protective clothing and equipment (such as gloves, respirators, etc.)shall be used where there is probability of injury that can be prevented by suchclothing or equipment.

Certain brushing operations, because of their nature and location, may require an enclosure to isolate the operation from other personnel.

Machine GuardsRotating power brushes should be used only on machines that are equipped withsafety guards, and these guards must be kept in place at all times.

Starting the BrushJog the machine before starting to determine if it is ready to use, and that thebrush is fastened securely. Run the brush at operating speed with safety guards inplace for at least one minute before applying work. Do not stand in front of or inline with the brush during this time.

Brush PressureAvoid excessive pressure against the work. This reduces the efficiency of the brushand could cause premature failure during operation.

Comply with the Safety Standards of the Industrial Division of the American BrushManufacturers Association and the American National Standards Institute B165.1-1985 “Safety Requirements for the Design, Care and Use of Power DrivenBrushing Tools,” and B 165.2-1982 “Safety Requirements for the Design, Care andUse of Power Driven Brushing Tools constructed with wood, plastic, or compositionhubs and cores.”


Abrasive BrushesShop Supplies

02a.qxp 10/5/06 1:25 PM Page 1

Brushes — Terminology

Outside DiameterA larger brush diameter results in a more efficient finishing tool. Productioneconomies are obtained through lower end-of-service costs. Wire brushes 304.8 mm (12 in) O.D. are a practical size whereas 304.8 to 406.4 mm (12 in to 16 in) O.D. is usually best for non-metallic types. Sizes for portable tools (6,000 RPM maximum) should not exceed 152.4 mm (6 in) O.D. in any material.

Inside DiameterDiameter of brush back. Increasing the inside diameter of a brush whilemaintaining the outside diameter results in a stiffer, less flexible brush face.

Trim LengthLength of fill material extending beyond brush back or face plates. A short trimmakes a stiff fast cutting brush, while a long trim gives a brush the flexibility tocontact irregular surfaces.

Fill DensityBrushes with high density are used to produce finer surface finishes, and alsowhere fast cutting action is required; for example, burr removing operations.

Brushes with low density offer greater brush flexibility. The relatively high degreeof freedom of the brush wires makes for quick and efficient removal of rust, scaleand other incrustations from surfaces by the impact resulting from the whip-likeimpingement of the wires on the surface.

FlexibilityThat quality of a brush which determines resiliency and ability to reach intoconfined areas and conform to uneven or contoured surfaces.

Brushing Speed and PressureRPM speed specified for Osborn power brushes are Maximum Safe Free Speeds. In most operations, a lower speed than that specified will prove more efficient foryou. Lower speeds and lighter pressures give longer brush life, generate less heatin the work, and require less power. It is important to remember that the TIPS ofthe wire filaments do the actual work. Where high brush pressures and speeds arerequired, it is recommended that a more aggressive brush be used. This may bedone by increasing wire size, decreasing trim length or in some instances changingto another brush type.

Brush and Operating Adjustments to Obtain the Desired Results

Observed Result:Brush works too slowly.

Corrections Suggested:1. Increase surface speed by increasing O.D. or RPM.

2. Decrease trim length and increase fill density.

3. Increase filament diameter.

Observed Result:Brush works too fast

Corrections Suggested:1. Reduce surface speed by reducing RPM of O.D.

2. Reduce filament diameter.

3. Reduce fill density.

4. Increase trim length.

Observed Result:Action of brush peens burr to adjacent surfaces

Corrections Suggested:1. Decrease trim length and increase fill density.

2. If wire brush tests indicate metal too ductile (burr is peened rather than removed), change tonon-metallic brush such as treated Tampico usedwith burring compound.

Observed Result:Finer or smoother finish required

Corrections Suggested:1. Decrease trim length and increase fill density.

2. Decrease wire diameter.

3. Try treated Tampico or cord brushes with suitable compounds recommended speeds.

4. Use auxiliary buffing compound with brush.

Observed Result:Finish too smooth and lustrous

Corrections Suggested:1. Increase trim length.

2. Reduce brush fill density.

3. Reduce surface speed.

4. Increase filament diameter.

Observed Result:Brushing action not sufficiently uniform

Corrections Suggested:1. Increase trim length and decrease fill density.

2. Devise hand-held or mechanical fixture, ormachine to avoid irregular offhandmanipulation.

Radial Knot Brushes — Stringer Bead-Type Wheels

• Designed for heavy duty cleaning, scale, spatter and rust removal• High quality oil tempered wire gives long life on pipe and plate weld cleaning

ID: C80425T1Arbor Hole Max Safe

Pkg. (A.H) Wire Free SpeedPart No. Qty. Dia. Threaded Size Size RPM

1U-9957 1 76.2 mm (3 in) 9.5 mm (3⁄8 in) A.H. .36 mm (.014 in) 25,000


Brushes AbrasiveSh

op S

uppl

ies

02a.qxp 10/5/06 1:25 PM Page 2

Bench Grinder Wire Brushes

• General purpose wire brushes that provide fine to medium brushing action• Excellent for brushing uneven surfaces or areas not easily reached by wider brushes• Will remove light scale, dirt, rust, corrosion or light burrs

ID: C33524T1

Max. SafePkg. Wheel Arbor Wire Free Speed

Part No. Qty. Dia. Hole Size Face Width RPM

1U-9971 1 152.4 mm (6 in) 12.7-15.9 mm (1⁄2 -5⁄8 in) .36 mm (.014 in) 15.88 mm (5⁄8 in) 6,000

1U-9972 1 152.4 mm (6 in) 12.7-15.9 mm (1⁄2 -5⁄8 in) .36 mm (.014 in) 25.4 mm (1 in) 6,000

1U-9973 1 177.8 mm (7 in) 15.9 mm (5⁄8 in) .36 mm (.014 in) 25.4 mm (1 in) 6,000

1U-9974 1 203.2 mm (8 in) 15.9 mm (5⁄8 in) .36 mm (.014 in) 25.4 mm (1 in) 4,500

End Wire Brushes, 6.4 mm (1⁄4 in) Shank

• Suited for use on portable air and electric tools for jobs where space limitation is a factor• For a majority of operations, higher speeds are required for effective brushing action

NOTE: As a safety precaution, end brush shanks must be fully inserted into the chuck or collet, and tightened securely.

ID: D01191T1

Max. SafePkg. Wire Free Speed

Part No. Qty. Description Size Dia. RPM

1U-9939 1 Knot Style .51 mm (.020 in) 25.4 mm (1 in) 20,000

1U-9942 1 Circular End .51 mm (.020 in) 38.1 mm (11⁄2 in) 15,000

1U-9943 1 Knot Style .51 mm (.020 in) 19 mm (3⁄4 in) 20,000

1U-9946 1 Galvanized .36 mm (.014 in) 76.2 mm (3 in) 5,000

4C-6157 1 Crimped Encapsulated Flair-Flex .264 mm (.0104 in) 38.1 mm (11⁄2 in) 25,000

4C-6158 1 Knot Style .36 mm (.014 in) 25.4 mm (1 in) 20,000

ID: D01221T1 ID: D01275T1

Wire Part No. Quantity Description Size Gauge RPM Arbor Length x Width Shank Material

262-9720 — Brush, Cup Knot Double Row 152.4 mm (6 in) .023 6,000 5⁄8-11 76.2 mm x 152.4 mm (3 in x 6 in) — Steel

262-9721 1 box of 10 brushes Brush End, Straight Wire 12.7 mm (1⁄2 in) .006 22,000 — — 1⁄4 in Steel

262-9722 1 box of 10 brushes Brush End, Straight Wire 19 mm (3⁄4 in) .006 20,000 — 76.2 mm x 63.5 mm (3 in x 21⁄2 in) 1⁄4 in Steel

262-9723 1 box of 10 brushes Brush End, Straight Wire 25.4 mm (1 in) .006 20,000 — 76.2 mm x 63.5 mm (3 in x 21⁄2 in) 1⁄4 in Steel

262-9724 1 box of 10 brushes Brush Cup, Straight Wire 152.4 mm (6 in) .014 6,000 5⁄8-11 76.2 mm x 152.4 mm (3 in x 6 in) — Steel

262-9725 — Brush Cup, Knot Single Row 152.4 mm (6 in) .014 6,000 5⁄8-11 76.2 mm x 152.4 mm (3 in x 6 in) — Steel

262-9726 1 box of 10 brushes Brush End, Straight Wire 12.7 mm (1⁄2 in) .020 22,000 — 76.2 mm x 63.5 mm (3 in x 21⁄2 in) 1⁄4 in Steel

262-9727 1 box of 10 brushes Brush End, Straight Wire 19 mm (3⁄4 in) .020 20,000 — 76.2 mm x 63.5 mm (3 in x 21⁄2 in) 1⁄4 in Steel

262-9728 1 box of 10 brushes Brush End, Straight Wire 25.4 mm (1 in) .020 — — 76.2 mm x 63.5 mm (3 in x 21⁄2 in) 1⁄4 in Steel

262-9729 1 box of 10 brushes Brush End, Knot 19 mm (3⁄4 in) .014 — — 76.2 mm x 63.5 mm (3 in x 21⁄2 in) 1⁄4 in Steel



Wire Brushes

• Used to clean large metal surfaces• Remove burrs, weld scale, and rust• Good for edge blending

and surface preparation

02a.qxp 10/5/06 1:25 PM Page 3

ID: D00637T1

Crimped End Wire Brushes, 6.4 mm (1⁄4 in) Shank

• For cleaning, deburring, or removing hard deposits• Used with portable air and electric tools for jobs

where space limitation is a factor• For a majority of operations, higher speeds result

in more effective brushing action• Material: crimped wire, except for 1U-9945 which

is galvanized coated crimped wire

NOTE: As a safety precaution, end brush shanks must be fully inserted into the chuck or collet, and tightened securely.

Part No. Diameter Wire Size Max RPM

1U-9941 19 mm (3/4 in) 0.51 mm (.020 in) 20,000

4C-6153 25 mm (1 in) 0.15 mm (.006 in) 20,000

4C-6154 25 mm (1 in) 0.264 mm (.0104 in) 20,000

1U-9940 25 mm (1 in) 0.51 mm (.020 in) 20,000

249-5284 38 mm (1.5 in) 0.264 mm (.0104 in) 25,000

249-5285 51 mm (2 in) 0.299 mm (.0118 in) 25,000

249-5286 64 mm (2.5 in) 0.299 mm (.0118 in) 25,000

1U-9945 76 mm (3 in) 0.36 mm (.014 in) 5,000

ID: C27131T1

Part No. Brush Diameter

4C-6342 88.9 mm (31⁄2 in)

4C-6343 101.6 mm (4 in)

1U-7429 114.3 mm (41⁄2 in)

1U-9788 127 mm (5 in)

4C-6344 139.7 mm (51⁄2 in)

4C-6345 152.4 mm (6 in)

4C-6346 165.1 mm (61⁄2 in)

4C-6347 177.8 mm (7 in)

4C-6348 190.5 mm (71⁄2 in)

4C-6349 203.2 mm (8 in)

4C-6350 241.3 mm (91⁄2 in)

Nylon Cleaning Brushes

• Used in a variety of cleaning applications, such as spray paint equipment and parts washers for cleaning tubes, valves cylinders, etc

• Nylon bristles clean dirt without damaging surface• Available in a several brush diameters to meet cleaning task requirements• Nylon bristles with a 25 cm (10 in) metal handle• Long handle for cleaning hard to reach dirt and debris

ID: D00643T1

Part No. Brush Diameter Brush Length Qty.

266-2281 6.4 mm (1/4 in) 51 mm (2 in) 48

264-4355 13 mm (1/2 in) 51 mm (2 in) 48

266-2282 16 mm (5/8 in) 51 mm (2 in) 48

264-4357 19 mm (3/4 in) 51 mm (2 in) 48

264-4358 22 mm (7/8 in) 102 mm (4 in) 48

266-2283 32 mm (1.25 in) 102 mm (4 in) 48

264-4372 38 mm (1.5 in) 102 mm (4 in) 48

264-4352 51 mm (2 in) 102 mm (4 in) 48

Tube Brushes

Part No. Pkg. Qty. Description O.D. Wire

4C-6160 1 76.2 mm (3 in) Brush Face, 609.6 mm (24 in) O.A.L. 15.88 mm (5⁄8 in) .15 mm (.006 in), Carbon Steel

4C-6161 1 76.2 mm (3 in) Brush Face,609.6 mm (24 in) O.A.L. 9.53 mm (3⁄8 in) .13 mm (.005 in), Carbon Steel


Brushes AbrasiveSh

op S

uppl

ies

Cylinder Washing Brushes

• Brush Research Mfg. Co. Inc.

02a.qxp 10/5/06 1:25 PM Page 4

Brass Bristle Cleaning Brush

• Use to clean tire beads prior to mounting• Also good for other applications where steel or nylon bristles will not work• Foam plastic handle will not crack when left in cleaning solution• Dense brass bristles clean well and will not rust

ID: D00655T1

Part No. Overall Size (L x W) Bristle Length Pkg. Qty.

262-4868 216 x 9 cm (8.5 x 3.5 in) 16 mm (.62 in) 12

ID: D00649T1

Part No. Diameter Overall Length Bristle Length Pkg. Qty.

264-4359 25 mm (1 in) 25 cm (10 in) 64 mm (2.5 in) 12

Spindle Mounted Flap Brush

• Used to clean curved and irregular shaped parts with hard to reach areas• Use in place of wire wheels, hand scrapers, and wire brushes• Typical applications include cleaning up both hydraulic cylinders and engine lower bores• Can also be used to clean rust, carbon deposits, adhesives, and tough coatings

ID: C34432T1Pkg. Maximum Optimum

Part No. Qty. Description Diameter Operating Speed Operating Speed Use with:

4C-8630 1 CPFB-S A Medium 76.2 mm x 44.5 mm x 6.35 mm 8,500 8,500 Grinder/Hand Drill(3 in x 13⁄4 in x 1⁄4 in)



Parts Cleaning Brush

• For general cleaning — works great in parts washers• Will not rust or damage the surface of the part being cleaned• All poly handle and ferrule with natural fiber bristles• Tapered handle for better grip• Long bristles reach hard to clean areas

Flap Brush with Non-Woven Surface Conditioning Material

• Non-woven surface conditioning material and aluminum-oxide abrasive flaps with cloth backing• Epoxy filled center with 6.4 mm (.25 in) shank• Used to clean curved and irregular shaped parts with hard to reach areas• Use in place of wire wheels, hand scrapers, and wire brushes• Typical applications include cleaning up both hydraulic cylinders and engine lower bores• Can also be used to clean rust, carbon deposits, adhesives, and tough coatings

ID: D00631T1

Part No. Size Grade Grit

254-5310 38 x 25 mm (1.5 x 1 in) Coarse 60

254-5311 38 x 25 mm (1.5 x 1 in) Medium 120

254-5312 38 x 25 mm (1.5 x 1 in) Very Fine 240

254-5313 76 x 51 mm (3 x 2 in) Coarse 60

254-5314 76 x 51 mm (3 x 2 in) Medium 120

254-5315 76 x 51 mm (3 x 2 in) Very Fine 240

02a.qxp 10/5/06 1:25 PM Page 5

ID: D00607T1

ID: D00595T1

Type 29 Zirconia Flap Disc with 5⁄8-11 Hub

• Long lasting Zirconia cloth backed flaps• Fiberglass reinforced backer• Three popular grades• Grind and finish in one operation• Permanently attached metal hub

ID: D00601T1

Part No. Outside Diameter Hub Thread Grade Pkg. Qty.

254-5339 114 mm (4.5 in) 5⁄8-11 36G 10

254-5340 114 mm (4.5 in) 5⁄8-11 60G 10

254-5341 114 mm (4.5 in) 5⁄8-11 80G 10

254-5342 178 mm (7 in) 5⁄8-11 36G 10

254-5343 178 mm (7 in) 5⁄8-11 60G 10

254-5344 178 mm (7 in) 5⁄8-11 80G 10

Hi-Density Zirconia Flap Disc with 5⁄8-11 Hub

• Hi-density flap disc with 5⁄8-11 permanently attached metal hub• Good for stock removal as well as finishing• Fiberglass reinforced backer• Available in four popular grades• Made with long-life Zirconia grain

Part No. Outside Diameter Hub Thread Grade Pkg. Qty.

254-5345 114 mm (4.5 in) 5⁄8-11 36 grit 10

254-5346 114 mm (4.5 in) 5⁄8-11 60 grit 10

254-5347 114 mm (4.5 in) 5⁄8-11 80 grit 10

254-5348 114 mm (4.5 in) 5⁄8-11 120 grit 10

254-5349 178 mm (7 in) 5⁄8-11 36 grit 10

254-5350 178 mm (7 in) 5⁄8-11 60 grit 10

254-5351 178 mm (7 in) 5⁄8-11 80 grit 10

Discs

Type 29 Zirconium Flap Discs

• Grind and finish in one operation—good for heavy stock removal as well as finishing — reduces downtime

• Three popular grits ideal for iron, aluminum, stainless steel, sheet metal, copper, brass, fiberglass, masonry, and even wood

• Unique design allows for consistent sharp edge as wheel wears away• Has a built-in angle for less operator fatigue• Fiberglass reinforced backer• Long lasting Zirconia grain cloth-backed flaps

Part No Size Grade Pkg. Qty.

236-8105 114.3 x 22.23 mm (41⁄2 x 7⁄8 in) ZIR 24 10

236-8106 114.3 x 22.23 mm (41⁄2 x 7⁄8 in) ZIR 36 10

236-8107 114.3 x 22.23 mm (41⁄2 x 7⁄8 in) ZIR 60 10

236-8109 114.3 x 22.23 mm (41⁄2 x 7⁄8 in) ZIR 80 10

236-8111 114.3 x 22.23 mm (41⁄2 x 7⁄8 in) ZIR 120 10

236-8112 152.4 x 22.23 mm (6 x 7⁄8 in) ZIR 24 10

236-8113 152.4 x 22.23 mm (6 x 7⁄8 in) ZIR 36 10

236-8114 152.4 x 22.23 mm (6 x 7⁄8 in) ZIR 60 10

236-8115 152.4 x 22.23 mm (6 x 7⁄8 in) ZIR 80 10

236-8116 152.4 x 22.23 mm (6 x 7⁄8 in) ZIR 120 10

254-5336 178 x 22.23 mm (7 x 7⁄8 in) ZIR 36 10

254-5337 178 x 22.23 mm (7 x 7⁄8 in) ZIR 60 10

254-5338 178 x 22.23 mm (7 x 7⁄8 in) ZIR 80 10


Discs AbrasiveSh

op S

uppl

ies

02a.qxp 10/5/06 1:25 PM Page 6

ID: C33433T1Pkg. Maximum Optimum

Part No. Qty. Description Diameter Operating Speed Operating Speed Use With:

5P-9709 25 Surface Conditioning Disc, A-Coarse 177.8 mm (7 in) 6,000 4,500 Grinder

6V-0185 25 Surface Conditioning Disc, A-Coarse 127.0 mm (5 in) 10,000 10,000 Grinder

1U-7622 25 Surface Conditioning Disc, A-Coarse 101.6 mm (4 in) 13,000/18,0001 10,000 Grinder/Hand Drill

4C-4384 25 Surface Conditioning Disc, A-Coarse 76.2 mm (3 in) 13,000 15,000 Grinder/Hand Drill

4C-4383 50 Surface Conditioning Disc, A-Coarse 50.8 mm (2 in) 13,000 18,000 Grinder/Hand Drill

1 Maximum speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter; maximum speed is 18,000 if used with 1U-7623.


Abrasive DiscsShop Supplies

Surface Reconditioning Discs

Conditioning surfaces with conventional abrasive discs often results in dimensioning, gouging, or undercutting. Wire brushes don’t thoroughly remove contaminants which can lead to rework. Their wires can become loose,fly off, and injure an operator.

Surface reconditioning discs can help reduce or eliminate these problems. They deliver superior, consistent finishes when you need to clean, deburr, blend or finish.

• Use disc coming off the edge — better finish results• Aluminum Oxide• Use for gasket removal• Use for deburring, cleaning and rust removal• Use instead of wire brushes or sand paper when you don’t want to remove any stock

Surface Reconditioning Discs — Superior Edge Wear

• Surface reconditioning disc used on right angle tools• The edges of an abrasive on a right angle grinder tend to wear faster than the center and thus the disc

is never fully used up. Superior edge wear discs have longer overall life than standard discs.• Ideal for gasket removal, rust removal and general cleaning on steel parts• Retained by hook and loop type fasteners or 7⁄8 inch bolt thru application• Brown disc with gray backing

ID: C33433T1

Package Maximum OptimumPart No. Quantity Description Diameter Operating Speed Operating Speed Use with:

9U-6921 10 SE Disc — A Coarse 177.8 mm (7 in) 6,000 4,500 Grinder

9U-6922 10 SE Disc — A Coarse 127.0 mm (5 in) 10,000 10,000 Grinder

9U-6923 10 SE Disc — A Coarse 127.0 x 22.23 mm center hole(5 x 7⁄8 in) 10,000 10,000 Grinder

9U-6924 10 SE Disc — A Coarse 101.6 mm (4 in) 13,000/18,0001 10,000/15,000 Grinder/Hand Drill

9U-6925 10 SE Disc — A Coarse 101.6 x 22.23 mm center hole 13,000 10,000 Grinder/(4 x 7⁄8 in) Hand Drill

9U-6926 10 Roloc — A Coarse 76.2 mm (3 in) 18,000 15,000 Die Grinder/Hand Drill

9U-6927 10 Roloc — A Coarse 50.8 mm (2 in) 25,000 21,000 Die Grinder/Hand Drill

1 Maximum speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter; maximum speed is 18,000 if used with 1U-7623.

02a.qxp 10/5/06 1:26 PM Page 7

ID: C44338T1

Disc Pad Holders

Safety TipPlace holder on table before turning tool on — prevents pad from flying off.

ID: C44337T1Pkg. MaximumPart No. Qty. Use With: Description Diameter Hub/Shank Operating Speed

5P-9718 1 5P-9709 Holder 177.8 mm (7 in) 5⁄8 in-11 6,000

6V-0186 1 1 6V-0185 Holder 127.0 mm (5 in) 5⁄8 in-11 4,800

4C-4763 1 1U-7622 Pad Holder 101.6 mm (4 in) M14 x 2 13,000

4C-4764 1 1U-7622 Pad Holder 101.6 mm (4 in) 5⁄8 in-11 13,000

1U-7623 1 1U-7622 Pad Holder 101.6 mm (4 in) 6.35 mm shaft (1⁄4 in) 18,000

4C-4382 1 4C-4384 Pad Holder 76.2 mm (3 in) 6.35 mm shaft (1⁄4 in) 20,000

4C-4381 1 4C-4383 Pad Holder 50.8 mm (2 in) 6.35 mm shaft (1⁄4 in) 20,000

1U-5520 1 9U-6926 R-style Disc Holder 76.2 mm (3 in) 18,000

1U-5519 1 9U-6927 R-style Disc Holder 50.8 mm (2 in) 25,000

1U-5518 1 1U-5519/1U-5520 R-style Threaded Shaft

1 Female, 5⁄8 in-11; use 1U-9381 to adapt it.

R-style Surface Conditioning Discs

• Use a more positive retention method than the “hook and loop” fasteners system• R-style discs have a quarter turn male fastener embedded into the disc. The disc holder

has the corresponding female fastener.• Typically used at smaller sizes where the higher maximum operating speed requires

a more positive retention system• The disadvantage of this system is that the surface conditioning operation must always

be conducted in one direction only. Reversing the tool will “unspin” the disc from the holder.• Aluminum oxide• Use for gasket removal, deburring, cleaning, and rust removal• Use instead of wire brushes or sand paper when you don’t want to remove any stock

Roloc Surface Conditioning Discs

Pkg. Maximum OptimumPart No. Qty. Description Diameter Operating Speed Operating Speed Use With

1U-5516 25 R-style Surface Conditioning Disc— 50.8 mm (2 in) 25,000 18,000 Die Grinder,use with 1U-5519 and 1U-5518 Hand Drill

1U-5517 25 R-style Surface Conditioning Disc— 76.2 mm (3 in) 15,000 15,000 Die Grinder,use with 1U-5520 and 1U-5518 Hand Drill

Disc Holders

Pkg. MaximumPart No. Qty. Description Diameter Operating Speed Use With

1U-5520 1 R-style Disc Holder, use with 1U-5518 76.2 mm (3 in) 15,000 Die Grinder/Hand Drill

1U-5519 1 R-style Disc Holder, use with 1U-5518 50.8 mm (2 in) 25,000 Die Grinder/Hand Drill

1U-5518 1 R-style Threaded Shaft, use with 1U-5519 or 1U-5520 6.35 mm (1⁄4 in) — Die Grinder/Hand Drill


Discs AbrasiveSh

op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 8

ID: C33435T1

Discs and Holders

• Flexible discs can be used to remove corrosion and surface deposits• Clean/strip designation indicates a coarse version of cutting/ polishing disc• Typical applications are clean up of hydraulic cylinders and engine lower bores• Can be used in stacks of two or three, for whatever width is required to clean the surface in the most efficient manner• Aluminum oxide• Use for gasket removal, deburring, cleaning, and rust removal• Use instead of wire brushes or sand paper when you don’t want to remove any stock• 279-2267 material is more aggresive so has a better cleaning and polishing effect than 6V-4086

Pkg. Maximum OptimumPart No. Qty. Description Diameter Operating Speed Operating Speed Use With:

6V-4086 1 Cutting and Polishing Disc, 152.4 x 6.35 mm 4,000 3,200 Straight GrinderA-Medium (6 x 1⁄4 in) and Hand Drill

8T-3054 1 Clean ‘N Strip Disc, 152.4 x 12.7 mm 4,000 3,200 Straight GrinderExtra Coarse (6 x 1⁄2 in) and Hand Drill

4C-3868 1 Clean ‘N Strip Disc, 101.6 x 6.35 mm 6,000 4,500 Straight GrinderExtra Coarse (4 x 1⁄4 in) and Hand Drill

279-2267 1 Cutting and Polishing Disc 152.4 x 6.35 mm 4,000 3,200 Straight Grinder(6 x 1⁄4 in) and Hand Drill



ID: C44339T1

ID: C44340T1

Holders

Pkg. MaximumPart No. Qty. Use With: Description Diameter Hub/Shank Operating Speed

8T-3055 1 8T-3054 Mandrel #934 12.7 mm (1⁄2 in) 6.35 x 70.5 mm Dia. 4,000(1⁄4 x 21⁄2 in)

6V-4087 1 6V-4086/4C-3868 Mandrel #933 6.35 mm (1⁄4 in) 6.35 shank x 25.4 mm Dia. 6,000(1⁄4 x 1 in)

02a.qxp 10/5/06 1:26 PM Page 9

ID: C33433T1

ID: C44337T1

Holders

Maximum OptimumActual Maximum Operating Operating

Part No. Qty. Use with: Description Diameter Diameter Hub/Shank Speed Speed

5P-9718 1 150-1197 Holder 177.8 mm (7 in) 174.63 mm (67⁄8 in) 5⁄8 in-11 6,000 4,500

6V-0186 1 150-1244 Holder 127.0 mm (5 in) 120.65 mm (43⁄4 in) 5⁄8 in-11 10,000 10,000

4C-4763 1 150-1246 Holder 914 101.6 mm (4 in) 95.25 mm (33⁄4 in) M14 x 2 13,000 10,000

4C-4764 1 150-1246 Holder 914 101.6 mm (4 in) 95.25 mm (33⁄4 in) 5⁄8 in-11 13,000 10,000

4C-4765 1 150-1246 Holder 925 101.6 mm (4 in) 95.25 mm (33⁄4 in) 3⁄8 in-24 13,000 10,000

1U-7623 1 150-1246 Holder 925 101.6 mm (4 in) 98.43 mm (37⁄8 in) 1⁄4 in Shaft 18,000 10,000

1U-5520 1 150-1248 Roloc Disc Holder 76.2 mm (3 in) 69.85 mm (23⁄4 in) 20,000 15,000

1U-5519 1 150-1250 Roloc Disc Holder 50.8 mm (2 in) 44.45 mm (13⁄4 in) 25,000 20,000

1U-5518 1 1U-5519/1U-5520 Roloc Threaded Shaft

4C-4382 1 150-1252 Velcro Holder 923 76.2 mm (3 in) 78.03 mm (2 7.8 in) 20,000 15,000

4C-4381 1 150-1251 Velcro Holder 922 50.8 mm (2 in) 44.45 mm (13⁄4 in) 23,000 20,000

Surface Reconditioning Discs for Aluminum Surfaces

• The ideal disc for aluminum• Uses the same holders and grinders as other surface reconditioning discs

Fine Grade• Very fine grade minimizes the chance of changing the surface profile• Identified by blue/green color both front and back of disc

Medium Grade• Medium grade material used much like coarse but is less aggressive in performance—

used when very fine surface condition material is not quite aggressive enough• Ideal for work requiring less pressure such as grind marks, surface rust, and mild coatings• Brown disc with gray backing

Package Maximum OptimumPart No. Quantity Description Diameter Operating Speed Operating Speed Use with:

150-1197 10 Scuffing Disc — A Fine, N.H. 177.8 mm (7 in) 6,000 4,500 Grinder

150-1244 10 Scuffing Disc — A Fine, N.H. 127.0 mm (5 in) 10,000 10,000 Grinder

150-1246 10 Scuffing Disc — A Fine 101.6 mm (4 in) 13,000/18,0001 10,000/15,000 Grinder/Hand Drill

150-1248 10 Roloc Scuffing Disc — 76.2 mm (3 in) 18,000 15,000 Die Grinder/A Fine Hand Drill

150-1250 10 Roloc Scuffing Disc 50.8 mm (2 in) 25,000 21,000 Die Grinder/Hand Drill

236-8092 25 Scuffing Disc 76.2 mm (3 in) 23,000 rpm 23,000 rpm GrinderMedium

1 Maximum speed is 13,000 if used with 4C-4763, (4C-4764, 155-3595); maximum speed is 18,000 if used with 1U-7623.


Discs AbrasiveSh

op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 10

Surface Reconditioning Discs — Bolt-On Style

• Holders for these discs have a velcro type fastening system; not all the grinders in the shop will accept this kind of holder• For Blue Point AT425A Right Angle Grinder or similar model, a 7⁄8 inch center hole is needed

ID: C62936T1

Package Maximum OptimumPart No. Quantity Description Dia. x Center Hole Operating Speed Operating Speed Use with:

9U-6928 10 Disc — A Coarse 127.0 x 22.23 mm 10,000 10,000 Grinder(5x 7⁄8 in)

9U-6929 10 Disc — A Coarse 101.6 x 22.23 mm 13,000 10,000 Grinder(4 x 7⁄8 in)



ID: C66972T1

Roloc Holders and Threaded Shaft Bristle Discs

• Bristle design and 3-dimensional abrasives enable Bristle Disc to remove carbon buildup, coatings, sealants, gaskets and weld discoloration quickly, leaving a cleansurface ready for subsequent operations or inspection

• Used with rotary tool such as drill or small angle grinder• Designed to compete with crimped wire and bristle cup brushes• Extends range of surface reconditioning operations where conformability and flexibility are most critical• Provides exceptional finish, outstanding performance and a safer workplace by eliminating flying metal wires• Come in 3 sizes and 3 grades• All R-style holders use 1U-5518 Threaded Shaft

Shaft size 6.4 mm (.25 in)

Disc package quantity 10

50 grit discs carbon removal, welddiscoloration clean up or where coatingremoval discs are used

80 grit discs corrosion removal,sealant removal and generalmaintenance repairoperations

120 grit discs aluminum parts

Roloc Bristle Discs

Maximum OptimumPkg. Operating Operating

Item Part No Description Diameter Size Qty. Grit Color Speed Speed

1 138-4523 Bristle Disc 25 mm (1.0 in) 1 10 50 Green 30,000 25,000

1 138-4524 Bristle Disc 25 mm (1.0 in) 1 10 80 Yellow 30,000 25,000

1 151-8101 Bristle Disc 25 mm (1.0 in) 1 10 120 White 30,000 25,000







2 151-8102 Holder for Bristle Discs 25 mm (1.0 in)

2 1U-5519 Holder for Bristle Discs 51 mm (2.0 in)

2 1U-5520 Holder for Bristle Discs 76 mm (3.0 in)

3 1U-5518 Threaded Shaft

Not shown 150-5431 Holder for Bristle Discs 51 mm (2.0 in)

02a.qxp 10/5/06 1:26 PM Page 11

Maximum OptimumOperating Operating

Part No Size Grit Color Speed Speed Application

165-3945 41⁄2 50 Green 12,000 10,000 Carbon removal, weld discoloration cleaning, coating removal

165-3946 41⁄2 80 Yellow 12,000 10,000 Corrosion removal, sealant removal, general maintenance repair operations

165-3947 41⁄2 120 White 12,000 10,000 Aluminum parts

Fiber Discs

• Used for medium and heavy stock removal on right-angle sanding equipment for:- Cutting down and blending weld lines- Cutting down filler metal, rust and scale removal, as well as deburring

• Zirconium premium grain (except where noted) outlasts aluminum oxide and runs cooler• Performs well on stainless steel and high-tensile alloys• 22 mm (7/8 in) center hole for use with 5⁄8-11 arbor (except 236-8069 which has

16 mm (5⁄8 in) center hole)• Resin bond with fiber backing for strength• Used with rib-flow backup pads 254-5307, 254-5308, and 254-5309 (except for 236-8069)

ID: C33515T1

Zirconium Fiber Discs with 7/8 inch Arbor Hole

Part No. Grit Pad Diameter Pkg. Qty. Back-up Pad

268-8709 1 16 114 mm (41⁄2 in) 25 254-5307

1U-6827 24 114 mm (41⁄2 in) 25 254-5307

1U-6828 36 114 mm (41⁄2 in) 25 254-5307

1U-6829 50 114 mm (41⁄2 in) 25 254-5307

1U-6830 60 114 mm (41⁄2 in) 25 254-5307

1U-6831 80 114 mm (41⁄2 in) 25 254-5307

1U-6832 100 114 mm (41⁄2 in) 25 254-5307

1U-6833 120 114 mm (41⁄2 in) 25 254-5307

1U-6834 24 127 mm (5 in) 25 254-5308

1U-6835 36 127 mm (5 in) 25 254-5308

1U-6836 50 127 mm (5 in) 25 254-5308

1U-6837 60 127 mm (5 in) 25 254-5308

1U-6838 80 127 mm (5 in) 25 254-5308

1U-6839 100 127 mm (5 in) 25 254-5308

1U-6840 120 127 mm (5 in) 25 254-5308

1U-6841 24 178 mm (7 in) 25 254-5309

1U-6842 36 178 mm (7 in) 25 254-5309

1U-6843 50 178 mm (7 in) 25 254-5309

1U-6844 60 178 mm (7 in) 25 254-5309

1U-6845 80 178 mm (7 in) 25 254-5309

1U-6846 100 178 mm (7 in) 25 254-5309

1U-6847 120 178 mm (7 in) 25 254-53091 268-8709 Disc is aluminum oxide grain

Zirconium Alumina Vulcanized Fiber Disc with 5⁄8 inch Arbor Hole

Part No. Grit Pad Diameter Pkg. Qty.

236-8069 36 178 mm (7 in) 25

Bristle Discs

• Bristle design and 3-dimensional abrasive filled fingers enable bristle disc to remove carbon buildup, coatings, sealants, gaskets, and weld discoloration quickly, leaving a clean surface ready for subsequent operations or inspection

• Used with rotary tool such as drill or right angle grinder — can be used with 141-6993 Heavy-Duty Angle Grinder• Used for coating removal, weld preparation, and general cleaning• Increased safety during use — bristles are mounted securely to backing, virtually eliminate flying wires common

with wire brushes• Flexible, abrasive-filled bristles conform to part's surface and clean without removing base material, helping

reduce damage and rework• Unique bristle shape resists excessive edge wear and loading with coatings, dirt, and debris to extend disc

life and performance• Resists heat build-up to reduce potential tempering or work surface damage• Threaded 5⁄8-11 inch core quickly threads onto shaft of an electric or pneumatic right angle grinder• Color coding makes abrasive grade selection quick and easy

ID: C80352T1

Maximum operating speed 12,000 rpm

Internal thread 5⁄8-11


Discs AbrasiveSh

op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 12

Rib-flow Backing Pads for Fiber Disc

• Rib-flow backing pads allow air flow through the ribs extending disc life from 20 to 50%• Polymide construction with steel insert and arbor nut• Shipped in poly bag with 5⁄8-11 arbor flange nut• Available in three popular diameters• For use with angle grinders with a 5⁄8-11 spindle thread• 254-5307 and 254-5308 will fit

141-6993 Electric Angle Grinder and 254-5309 will fit 222-3064 or 222-3065 Pneumatic Angle Grinders

ID: D00577T1

Part No. Outside Diameter Max RPM Pkg. Qty. Used With1

254-5307 114.3 mm (4.5 in) 13,000 1 1U-6827 Fiber Disc

254-5308 127 mm (5 in) 11,900 1 1U-6834 Fiber Disc

254-5309 177.8 mm (7 in) 8,600 1 1U-6841 Fiber Disc1 24 grit fiber disc listed. Other grits are available.

R-Type Mini Grinding Discs

• Aluminum oxide with resin fiber back• Manufactured with non-carcinogenic bonding agents—

safer for the environment and dissipate heat while providing cooler cut for longer product life

• More coarse grits (24/36) best for weld removal, grinding, and deburring

• 50 grit best for blending; finer grits best for smooth sanding• Resists stretching, shedding, and grain loss• Maintain flexibility to work in contours• Use with 1U-5519, 150-5431,

and 1U-5520 R-Type Disc Holders

ID: D00803T1



Part No Diameter Grit Pkg. Qty.

236-8072 50.8 mm (2 in) 24 50

236-8073 50.8 mm (2 in) 36 50

236-8074 50.8 mm (2 in) 50 50

236-8075 50.8 mm (2 in) 80 50

236-8076 50.8 mm (2 in) 120 50

236-8078 76.2 mm (3 in) 24 25

236-8079 76.2 mm (3 in) 36 25

236-8081 76.2 mm (3 in) 50 25

236-8082 76.2 mm (3 in) 80 25

236-8083 76.2 mm (3 in) 120 25

ID: C34433T1

Discs

• Excellent for cleaning welds, removing tough coatings, carbon deposits, adhesives and rust• Conformable so there is less chance of under-cutting or gouging• Open web resists loading even from soft coatings and is non-metallic so it will not

contaminate the surface with metallic residues• Will work at low RPM’s, such as on a 6.35 mm (1⁄4 in) drill @ 1750 RPM• Works well on other substrates such as wood, aluminum and even plastic

Pkg. Maximum OptimumPart No. Qty. Description Diameter Operating Speed Operating Speed Use with:

4C-8637 1 Clean ‘N Strip 6.35 mm (1⁄4 in) 101.6 x 12.7 x 6.35 mm 8,000 8,000 Straight GrinderSpindle Mounted Disc (4 x 1⁄2 x 1⁄4 in) and Hand Drill(CSD1-S)

4C-8638 1 Clean ‘N Strip 6.35 mm (1⁄4 in) 101.6 x 25.4 x 6.35 mm 8,000 8,000 Straight GrinderSpindle Mounted Disc (4 x 1 x 1⁄4 in) and Hand Drill(CSD2-S)

02a.qxp 10/5/06 1:26 PM Page 13

ID: D00809T1

PSA Sanding Discs

• Ideally used on dual action (DA) air and electrical random orbit sanders

• Used on metal, plastic, fiberglass, wood, and painted surfaces• Anti-clog release agents are an additive process for long life• Quality full resin-over-resin bond• Each disc has protective backing to protect the adhesive

in dusty environments before use• Priced per roll

Part No Diameter Grit Pkg. Qty.

236-8039 127 mm (5 in) A/O 60 100

236-8040 127 mm (5 in) A/O 80 100

236-8041 127 mm (5 in) A/O 100 100

236-8042 127 mm (5 in) A/O 120 100

236-8043 127 mm (5 in) A/O 150 100

236-8044 127 mm (5 in) A/O 180 100

236-8045 127 mm (5 in) A/O 220 100

236-8046 127 mm (5 in) A/O 320 100

236-8047 127 mm (5 in) A/O 400 100

236-8048 152.4 mm (6 in) A/O 60 100

236-8049 152.4 mm (6 in) A/O 80 100

236-8050 152.4 mm (6 in) A/O 100 100

236-8051 152.4 mm (6 in) A/O 120 100

236-8052 152.4 mm (6 in) A/O 150 100

236-8053 152.4 mm (6 in) A/O 180 100

236-8054 152.4 mm (6 in) A/O 220 100

236-8055 152.4 mm (6 in) A/O 320 100

236-8056 152.4 mm (6 in) A/O 400 100

262-9736 PSA Stick-It Discs

• Aluminum oxide, resin bond adhesive backed paper discs• Special coating resists loading• Excellent for sanding paint, primer, metal, wood, fiberglass, and plastic• Paper weight: E• Color: gold• Material: aluminum oxide

ID: D01167T1

Part No. Size Grit Qty.

262-9736 (5 in) 40 100 per box

PSA Discs, Glue Backed, PSA/No Hole

• These discs have glue on the back and are used with backup pads to deburr, blend, etc.• Pressure sensitive adhesive on disc back makes changes fast and easy• Efficient on flat and contoured metal surfaces and hard to reach areas

ID: C44147T1

Size Pkg.Part No. Grit Description Dia x Hole Qty.

4C-3809 36 Cloth Backed Disc 50.8 mm (2 in) 50








4C-3824 80 PSA — Paper Disc Rolls 127 mm (5 in) 100

4C-3834 80 Cloth Backed Disk 304.8 mm (12 in) 25


Discs AbrasiveSh

op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 14

Backup Pads for PSA Discs

• Use stick and sand disc backup pads with all PSA discs• Made of flexible rubber that tapers at the edge• Come with 6.4 mm (1⁄4 in) steel shank for fast mounting into portable tool chunks

ID: C44147T1

Size Pkg.Part No. Dia. Shank Qty.

4C-3837 50.8 mm (2 in) 6.4 mm (1⁄4 in) 1

4C-3838 76.2 mm (3 in) 6.4 mm (1⁄4 in) 1

4C-3840 127 mm (5 in) 5⁄16 in-24 Thread Shank 1

Hook and Loop Sanding Discs

• Extremely tear resistant• Resists loading on metal, paint and wood surfaces• Strong backing• Use with hook and loop sanding pads• Material: aluminum oxide,

film back resin bond• Color: blue

ID: D00988T1

Part No. Diameter Grit Pkg. Qty

281-8271 127 mm (5 in) 100 50

281-8272 127 mm (5 in) 180 50

281-8273 152.4 mm (6 in) 100 50

281-8274 152.4 mm (6 in) 180 50

281-8275 152.4 mm (6 in) 220 50

281-8282 203.2 mm (8 in) 80 50

Hook and Loop Sanding Pads

• Molded hook and loop sanding pad with plastic hub• Use with hook and loop sanding discs



ID: D01597T1

Thread MaximumPart No. Diameter Size RPM

275-5264 127 mm (5 in) 5⁄16-24 10,000

275-5265 152.4 mm (6 in) 5⁄16-24 10,000

275-5266 203.2 mm (8 in) 5⁄8-11 4800

02a.qxp 10/5/06 1:26 PM Page 15

6V-2032 Adapter

Maximum operating speed 4,000

Number required 2

Wheels

Clean ’N Strip Unitized Wheels

• Constructed of the most advanced material, Clean ‘N Strip Unitized Wheels meet the demand for aggressive and durable cleaning products

• Designed to compete with power tool wire brushing, this product provides a cleaner, burr-free surface quicker than any wire fiber product

• Constructed of a non-woven nylon web, there is no opportunity for metal contamination or rusting in this product. It can be used on a variety of ferrous and non-ferrous metal surfaces

• Used extensively in weld cleaning and conditioning applications to provide the proper surfaces for high integrity welding and cleaned polish surfaces for non-destructive testing

• Use this product for heavy-duty cleaning of rust, corrosion and coatings of all types• Aluminum oxide• Use for gasket removal, deburring, cleaning, and rust removal• Clean up to 4 times faster than wire brushes, runs smoothly and resists loading• Use instead of wire brushes or sand paper when you don’t want to remove any stock

Density 7

Mineral type S

Color Black

Grade XCS

ID: C33436T1

Clean ’N Strip Unitized Wheels

Pkg. Wheel Hole Maximum OptimumPart No. Qty. Size Size Operating Speed Operating Speed Use With:

8T-7769 40 38.1 x 25.4 mm 4.8 mm 18,000 16,000 Die Grinder with 8T-7768(11⁄2 in x 1 in) (3⁄16 in)

ID: C33437T1

8T-7768 Mandrell #936


Package quantity 5

Use with 8T-7769

Light Deburring Wheel

• Widely used for fine deburring and polishing applications• Designed to allow for removal of burrs without changing the dimension of the workpiece• An excellent blending and radiusing tool• Used in a variety of hand and automatic deburring and finishing applications including centerless polishing

Density 6

Mineral type S

Color Gray

Grade Fine

ID: C33443T1

Pkg. Wheel Hole Maximum OptimumPart No. Qty. Description Size Size Operating Speed Operating Speed Use With:

8T-7748 3 Light Deburring Wheel 203.2 x 25.4 mm 76.2 mm 4,500 4,500 Bench and(8 in x 1 in) (3 in) Stand Grinder


Wheels AbrasiveSh

op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 16

ID: C33443T1

SST Deburring Wheels

• Designed to be a clean, safe, economical tool• Advanced construction results in long unit life• Use for deburring, radiusing and polishing

stainless steel and titanium as well as other ferrous and non-ferrous metals

Density 8

Mineral type S

Color Gray

Grade Fine


8T-7749 1 203.2 x 25.4 mm 76.2 mm 4,500 4,500 Bench and(8 in x 1 in) (3 in) Stand Grinder

6V-2032 Adapter


Number required 2

Type 27 Zirconium 4 inch Grinding Wheels

• Ideal for the toughest applications• Provides extremely long life• High performance Zirconium offers very fast stock removal and longer life• Cool running• Smoother, more consistent performance for operator• Best choice for stainless, castings, welding seams, and hard metal grinding

ID: D01461T1

Part No Size Grade Pkg. Qty.

236-8070 100 mm x 6 mm x 9.53 mm (4 in x 1⁄4 in x 3⁄8 in) 4997, ZG 50



Type 27 Aluminum Oxide 4 inch Grinding Wheel

• Designed for grinding applications on ferrous metal such as grinding/smoothing weld seams and cleaning/shaping metal surfaces

• Material: aluminum oxide and resin

ID: D01461T1

Part No. Size Type Grade Max RPM

262-9738 101.6 x 6.35 x 9.53 mm 27 A24 15,000(4 x 1⁄4 x 3⁄8 in) hole


Abrasive WheelsShop Supplies

Level Cut Unitized Wheel

• Made from an advanced material• An excellent blending and polishing tool• Used frequently in weld cleaning where high quality surface appearance is desirable

Density 5

Mineral type A

Color Tan

Letter color Red

Grade Fine

ID: C33520T1

ID: C33576T1


8T-7767 50 25.4 x 25.4 mm 4.8 mm 35,100 22,000 Die Grinder(1 in x 1 in) (3⁄16 in)

8T-7768 Mandres #936


Package quantity 5

02a.qxp 10/5/06 1:26 PM Page 17

ID: C80545T1

NOTE: Wheel should be operated in direction ofarrow. Never exceed maximum operating speed(RPM).

Finishing Flap Brush Wheel

• Fine grade flap brush replaces fine wire power brushes for removing carbon buildup, light rust and corrosion

Density 5

Mineral type A

Color Maroon

Grade Fine

ID: C33444T1

Pkg. Wheel Hole Maximum OptimumPart No. Qty. Size Size Operating Speed Operating Speed Typical Application

6V-2033 2 203.2 x 50.8 mm 76.2 mm 3,200 3,200 Bench Grinder, Stand (8 in x 2 in) (3 in) Grinders, Straight Grinders

6V-2032 Adapter


Number required 2

Flap Wheels

• Flap wheels consist of a series of coated abrasive pieces (forming the spokes of the wheel) which are mounted around a steel hub

• Supplied with a 1⁄4 in-20 thread mandrel designed for fast mounting• Can be used on higher speed machines popular in today’s market• Delivers smooth, chatter-free grinding• Use with portable and benchstand grinders

Part No. Pkg. Qty. Size Grit Max. RPM

4C-8511 10 1 in x 1 in 60 25,000

4C-8512 10 1 in x 1 in 120 25,000

4C-8513 10 1 in x 1 in 180 25,000

4C-8514 10 2 in x 1 in 60 20,000

4C-8515 10 2 in x 1 in 120 20,000

4C-8516 10 2 in x 1 in 180 20,000

4C-8517 10 3 in x 1 in 60 20,000

4C-8518 10 3 in x 1 in 120 20,000

4C-8519 10 3 in x 1 in 180 20,000

Optimum SurfaceFeet per MinuteSpeed Type Material

5,500 Aluminum

4,000 Hardwood

5,000 Non-ferrous metals

5,000 Steel (alloy)

5,000 Steel (mild)

6,500 Steel (stainless)

NOTE: Best speed ranges from 6,000 to9,000 SFPM (Surface feet per minute).Wheels should be operated in direction ofarrow. Never exceed maximum operatingspeed.

Adapters


4C-8520 Adapter 1⁄4 inch x 1 inch

4C-8521 Adapter 1⁄4 inch x 4 inch

262-9739 Large Flap Wheel Sander

• Flap wheel sander consists of a series of coated abrasive pieces(forming the spokes of the wheel) which are mounted around a steel hub

• Delivers smooth, chatter-free grinding• Used on bench grinder, stand grinder, or straight grinder

with 25.4 mm (1 in) spindle• Material: aluminum oxide

ID: D00787T1

Size Grit Max RPM Pkg. Qty.

6 in x 1 in 120 6,000 1


Wheels AbrasiveSh

op S

uppl

ies

Surface Condition Brush

• Non-woven surface condition material with epoxy-filled center

• Available in three grades — very fine, medium, and coarse

• Shank size: 6.35 mm (.25 in)

ID: D00583T1

Part No. Size Grade Pkg. Qty.

254-5316 38.1 x 25.4 mm (1.5 x 1 in) Coarse 1

254-5317 38.1 x 25.4 mm (1.5 x 1 in) Medium 1

254-5318 38.1 x 25.4 mm (1.5 x 1 in) Very Fine 1

254-5319 76.2 x 50.8 mm (3 x 2 in) Coarse 1

254-5320 76.2 x 50.8 mm (3 x 2 in) Very Fine 1

02a.qxp 10/5/06 1:26 PM Page 18

ID: C33509T1

ID: D00589T1

Part No. Size (diameter x thickness) Grit Pkg. Qty.

254-5321 25.4 x 25.4 mm (1 x 1 in) 60 10

254-5322 25.4 x 25.4 mm (1 x 1 in) 80 10

254-5323 25.4 x 25.4 mm (1 x 1 in) 120 10

254-5324 25.4 x 25.4 mm (1 x 1 in) 180 10

254-5325 25.4 x 25.4 mm (1 x 1 in) 240 10

254-5326 50.8 x 25.4 mm (2 x 1 in) 60 10

254-5327 50.8 x 25.4 mm (2 x 1 in) 80 10

254-5328 50.8 x 25.4 mm (2 x 1 in) 120 10

254-5329 50.8 x 25.4 mm (2 x 1 in) 180 10

254-5330 50.8 x 25.4 mm (2 x 1 in) 240 10

254-5331 76.2 x 25.4 mm (3 x 1 in) 60 10

254-5332 76.2 x 25.4 mm (3 x 1 in) 80 10

254-5333 76.2 x 25.4 mm (3 x 1 in) 120 10

254-5334 76.2 x 25.4 mm (3 x 1 in) 180 10

254-5335 76.2 x 25.4 mm (3 x 1 in) 240 10

Raised Hub Wheels

• Designed for use on electrical or air powered right angle or vertical shaft grinders• Designed for rough grinding applications, including:

- grinding/smoothing weld seams- cleaning metal surfaces

• Wheels fit 114.3 mm, 177.8 mm and 228.6 mm (41⁄2 in, 7 in and 9 in) grinders• Type 28 wheels have built-in 15° angle for out of position work• Wheels comply with ANSI safety code B-7.1

ID: C33508T1



Type 27

Max Wheel Size Pkg.Part No. Type Grit Spec. RPM OD x Thick x ID/Thread Qty.

1U-6788 Std. A24 15,300 101.6 x 3.18 x 15.88 mm (4 x 1⁄8 x 5⁄8 in) 10

1U-6789 Std. A24 15,300 101.6 x 6.35 x 15.88 mm (4 x 1⁄4 x 5⁄8 in) 10

1U-6790 Std. A24 13,300 114.3 x 3.18 x 22.23 mm (41⁄2 x 1⁄8 x 7⁄8 in) 10

1U-6791 Std. A24 13,300 114.3 x 6.35 x 22.23 mm (41⁄2 x 1⁄4 x 7⁄8 in) 10

9U-6382 Std. A24 12,220 127 x 6.35 mm x 5⁄8-11 (5 x 1⁄4 in x 5⁄8-11) 1

1U-6792 Std. A24 8,500 177.8 x 3.18 x 22.23 mm (7 x 1⁄8 x 7⁄8 in) 10

1U-6793 Std. A24 8,500 177.8 x 6.35 x 22.23 mm (7 x 1⁄4 x 7⁄8 in) 10

1U-6794 Std. A24 8,500 177.8 x 6.35 mm x 5⁄8-11 (7 x 1⁄4 in x 5⁄8-11) 10

1U-6795 Std. A24 6,600 228.6 x 6.35 x 22.23 mm (9 x 1⁄4 x 7⁄8 in) 10

1U-6796 Std. A24 6,600 228.6 x 6.35 mm x 5⁄8-11 (9 x 1⁄4 in x 5⁄8-11) 10

9U-6383 Hi Perf. Z/A241 12,220 127 x 6.35 mm x 5⁄8-11 (5 x 1⁄4 in x 5⁄8-11) 1

4C-3769 Hi Perf. Z/A241 8,500 177.8 x 6.35 x 22.23 mm (7 x 1⁄4 x 7⁄8 in) 5

4C-3770 Hi Perf. Z/A241 8,500 177.8 x 6.35 mm x 5⁄8-11 (7 x 1⁄4 in x 5⁄8-11) 5

4C-3772 Hi Perf. Z/A241 6,600 228.6 x 6.35 mm x 5⁄8-11 (9 x 1⁄4 in x 5⁄8-11) 5

Type 28 (built-in 15° angle)

Max Wheel Size Pkg.Part No. Type Grit Spec. RPM OD x Thick x ID/Thread Qty.

4C-3863 Std. A24 6,600 228.6 mm x 6.35 mm x 5⁄8 in-11 (9 in x 1⁄4 in x 5⁄8 in-11) 10

4C-3773 Hi Perf. Z/A241 8,500 177.8 mm x 6.35 mm x 22.23 mm (7 in x 1⁄4 in x 7⁄8 in) 5

4C-3774 Hi Perf. Z/A241 8,500 177.8 mm x 6.35 mm x 5⁄8 in-11 (7 in x 1⁄4 in x 5⁄8 in-11) 5

4C-3776 Hi Perf. Z/A241 6,600 228.6 mm x 6.35 mm x 5⁄8 in-11 (9 in x 1⁄4 in x 5⁄8 in-11) 51 Zirconia-Alumina

Abrasive Flap Wheels

• Aluminum-oxide coated abrasive flaps with cloth backing• Delivers smooth, chatter-free grinding• Use with handheld grinders• Mounted on 6.35 mm (.25 in) shank• Available in five popular grits and three sizes

ID: C33510T1

ID: D01461T1

Type 27, 6 inch Grinding Wheels

• Designed for rough grinding applications on ferrous metal such as grinding/smoothing weld seams and cleaning/shaping metal surfaces

Part No Size Grade Max RPM Pkg. Qty.

236-8061 152.4 mm x 6 mm x 22.23 mm (6 in x 1⁄4 in x 7⁄8 in) A/O 24 10,000 Bulk

Cut-Off Wheels

• Fully reinforced cut-off wheels for heavy-duty cut off jobs on ferrous metals

• Wheels comply with ANSI Safety Code B-7.1• Use A60 for burr-free, cool cutting of metal• Use A36 for rough cutting applications• Offer quality at a competitive price

Max Wheel Size Pkg.Part No. Grit Spec. RPM OD x Thick x ID Qty.

174-8900 A60 25,000 76.2 mm x .89 mm x 6.35 mm (3 in x .035 in x 1⁄4 in) 25


174-8902 A36 25,000 76.2 mm x 1.59 mm x 6.35 mm (3 in x 1⁄16 in x 1⁄4 in) 25



174-8905 A36 25,000 76.2 x 3.2 x 9.53 mm (3 in x 1⁄8 in x 3⁄8 in) 25







1U-6809 A36 5,100 304.8 mm x 2.8 mm x 25.4 mm (12 in x 7⁄64 in x 1 in) 25



Thin Cut Abrasive Cutting Wheels

• High quality treated grain for long life• Ideal for sheet metal, steel tubing,

and solid stock• Great for cutting off bolts and rusted

fasteners• Used on portable angle grinders• Available in 1⁄32 and 1⁄16 inch thickness

ID: D00797T1

Max Pkg. Part No Size Grade RPM Qty.

236-8066 114.3 mm x .889 mm x 22.23 mm A60 17,902 Bulk(41⁄2 in x .035 in x 7⁄8 in)

236-8067 127 mm x .889 mm x 22.23 mm A60 12,223 Bulk(5 in x .035 in x 7⁄8 in)

236-8068 152.4 mm x .889 mm x 22.23 mm A60 10,186 Bulk(6 in x .035 in x 7⁄8 in)


Wheels AbrasiveSh

op S

uppl

ies

Mandrel for Small Abrasive Wheels

• Simple, quick change design• Used with small cut-off wheels with either a 1⁄4 inch or 3⁄8 inch hole• Not recommended for wheels thicker than 1⁄8 inch• Safe to use in die grinders up to 30,000 RPM• Flush head for confined work• Stress relieved, high tensile steel• Includes two screws, one for 1⁄4 inch and one for 3⁄8 inch holes

ID: D00797T1

Part No. Description Dimension Pkg. Qty.

236-8038 Mandrel 2 inch OAL x 1⁄4 inch shank Bulk

02a.qxp 10/5/06 1:26 PM Page 20

Drill Sharpening Wheels (Type 1)

• Used on drill sharpening machines to form or resharpen drills• Use aluminum oxide for all types of steel• Use silicone carbide for tungsten carbide, non-ferrous metals such as brass, bronze and aluminum

ID: C80474T1

Wheel Size Pkg.Part No. Grit Spec. OD x Thick x ID Qty.

4C-3766 A80-H Aluminum Oxide 152.4 mm x 19 mm x 15.88 mm (6 in x 3⁄4 in x 5⁄8 in) 1

4C-3768 1 C80-I Silicon Carbide 152.4 mm x 19 mm x 15.88 mm (6 in x 3⁄4 in x 5⁄8 in) 11 Used to sharpen cobalt or carbide drill bits and tools

Portable Wheels — Reinforced (Type 1)

• Manufactured by Norton for Caterpillar• These reinforced wheels are to be used on grinders to clean up and blend• Straight wheels are to be used on portable horizontal shaft or straight shaft machines

ID: C41295T1


4C-3777 A36 27,120 50.8 mm x 12.7 mm x 9.53 mm (2 in x 1⁄2 in x 3⁄8 in) 10



Bench and Pedestal Wheels (Type 1)

• Cover a broad range of general bench grinding jobs• Offer custom quality• Choose aluminum oxide wheels for all types of steel• 152.4 mm, 177.8 mm, 203.2 mm, and 254 mm

(6 in, 7 in, 8 in and 10 in) wheels are supplied with additional arbor bushings so one specification can meet the needs of several machines with different arbor sizes

ID: C34435T1




1U-6782 A36 4,140 152.4 mm x 25.4 mm x 25.4 mm (6 in x 1 in x 1 in) 1





1U-8285 A36 2,485 254 mm x 25.4 mm x 31.75 mm (10 in x 1 in x 11⁄4 in) 1

1U-8286 A60 2,485 254 mm x 25.4 mm x 31.75 mm (10 in x 1 in x 11⁄4 in) 1

1U-8289 A36 2,070 304.8 mm x 50.8 mm x 31.75 mm (12 in x 2 in x 11⁄4 in) 1

1U-8290 A60 2,070 304.8 mm x 50.8 mm x 31.75 mm (12 in x 2 in x 11⁄4 in) 1

Arbor Adapter Bushings included (Stock one size — use it on two different grinding machines.)

12.7 mm 15.88 mm 19 mm 22.23 mm 25.4 mmDiameter Center Hole (1⁄2 in) (5⁄8 in) (3⁄4 in) (7⁄8 in) (1 in)

152.4 mm 25.4 mm • • •(6 in) (1 in)

177.8 mm 25.4 mm • • •(7 in) (1 in)

304.8 mm 25.4 mm • • •(8 in) (1 in)

254 mm 31.75 mm • •(10 in) (11⁄4 in)



02a.qxp 10/5/06 1:26 PM Page 21

ID: D00613T1

Flaring Cup Snagging Wheels (Type 11)

• Use on right angle or vertical machines• Use for grinding welds, cleaning castings, or grinding fins and parting lines from rough castings• Use for smoothing of weld seams and metal preparations prior to plating/painting

ID: C33511T1

Max Large OD/Small OD Pkg.Part No. Grit Spec. RPM x Thick x ID Qty.

1U-6817 A16 9,075 101.6/76.2 mm x 50.8 mm x 5⁄8 in-11 (4/3 in x 2 in x 5⁄8 in-11) 10

1U-6818 A16 7,260 127/95.3 mm x 50.8 mm x 5⁄8 in-11 (5/33⁄4 in x 2 in x 5⁄8 in-11) 10

1U-6819 A16 6,000 152.4/120.7 mm x 50.8 mm x 5⁄8 in-11 (6/43⁄4 in x 2 in x 5⁄8 in-11) 5

Miscellaneous

Abrasive Hand Pads

• Every workplace has uses for non-woven nylon abrasive hand pads—whenever surfaces must be conditioned or cleaned by hand• Used to clean surfaces or remove rust, oxides, paint discoloration, and other surface contaminants• Impart and blend cosmetic finishes on metal or highlight wood finishes• Hand deburr metals and plastics quickly and economically• Used with optional 4C-4175 Hand Pad Holder• Size: 152 x 229 mm (6 x 9 in)

Part No. Description Grade Color Pkg.Qty.

241-9512 Cleaning and Finishing Fine Gray 20

8T-7751 Heavy-Duty Cleaning Medium Green 20

8T-7765 General Purpose Medium Maroon 20

8T-7752 Long Life Production Coarse Black 20

262-9980 Heavy-Duty Aggresive Extra Coarse Tan 20

Cutting and Polishing Rolls

• A unique and aggressive material for cleaning, finishing deburring• Ideal as a utility bench roll• Used in similar application as Emery Rolls, but does not load up with material


Wheels / Miscellaneous AbrasiveSh

op S

uppl

ies

ID: C33446T1

Part No. Pkg. Qty. Size Grade Use With

1U-5514 1 51 mm x 9 m (2 in x 30 ft) Very Fine Hand application or hand drill with 8T-7766 mandrel

1U-5515 1 51 mm x 9 m (2 in x 30 ft) Medium Hand application or hand drill with 8T-7766 mandrel

1U-5512 1 25.4 mm x 9 m (1 in x 30 ft) Very Fine Hand application or hand drill with 8T-7766 mandrel

1U-5513 1 25.4 mm x 9 m (1 in x 30 ft) Medium Hand application or hand drill with 8T-7766 mandrel

Mineral type Aluminum oxide

Color Tan

Grade Very fine, medium

Adapter — 8T-7766 Mandrel #935

• Tear off strip and insert in the mandrel to use in corners and other hard to reach areas• Use on air drills

Maximum operating speed 6,000 RPM with 25.4 x 38.1 mm (1 in x 11⁄2 in) flat stock (roll or hand pad)

Package quantity 5

ID: C44336T1

02a.qxp 10/5/06 1:26 PM Page 22

ID: C33516T1

ID: A92453T1ID: D01467T1

Sheet size 22.86 x 34.93 cm (9 x 13.75 in)

Grit 4/0

Quantity 100 sheets/package

6V-2010 Polishing Stone

• Use this fine grade polishing stone to remove the sharp, raised edges of nicks and burrs on machine components

• More useful than the emery paper where a burr or raised edge is large.

• Should always be used with a lightweight oil

Dimensions 100 mm x 25 mm x 6 mm (4 in x 1 in x .25 in)

Package quantity 1

Cloth Shop Rolls

• These cloth shop rolls are cut in various widths and can be torn to the desired length for hand deburring• For contour sanding, stripping, deburring, rust removal, cutdown prior to polishing, and all general maintenance work


Abrasive MiscellaneousShop Supplies

Size Pkg.Part No. Grit Width x Length Qty.

262-9732 180J 25 mm x 45.7 m 1(1 in x 50 yd)

262-9737 320J 25 mm x 45.7 m 1(1 in x 50 yd)

262-9740 400J 25 mm x 45.7 m 1(1 in x 50 yd)

269-7255 80J 25 mm x 45.7 m 1(1 in x 50 yd)

269-7256 100J 25 mm x 45.7 m 1(1 in x 50 yd)

269-7257 120J 25 mm x 45.7 m 1(1 in x 50 yd)

269-7258 220J 25 mm x 45.7 m 1(1 in x 50 yd)

269-7259 280J 25 mm x 45.7 m 1(1 in x 50 yd)

269-7260 500J 25 mm x 45.7 m 1(1 in x 50 yd)

1U-6848 60J 38.1 mm x 45.7 m 1(11⁄2 in x 50 yd)

4C-8522 80J 38.1 mm x 22.7 m 1(11⁄2 in x 25 yd)


4C-8523 120J 38.1 mm x 22.7 m 1(11⁄2 in x 25 yd)

4C-8524 180J 38.1 mm x 22.7 m 1(11⁄2 in x 25 yd)

1U-6849 80J 38.1 mm x 45.7 m 1(11⁄2 in x 50 yd)

1U-6850 120J 38.1 mm x 45.7 m 1(11⁄2 in x 50 yd)

1U-6851 180J 38.1 mm x 45.7 m 1(11⁄2 in x 50 yd)

1U-6852 240J 38.1 mm x 45.7 m 1(11⁄2 in x 50 yd)

1U-6853 320J 38.1 mm x 45.7 m 1(11⁄2 in x 50 yd)

1U-8274 60J 50.8 mm x 45.7 m 1(2 in x 50 yd)

1U-8275 80J 50.8 mm x 45.7 m 1(2 in x 50 yd)

1U-8276 100J 50.8 mm x 45.7 m 1(2 in x 50 yd)

1U-8277 120J 50.8 mm x 45.7 m 1(2 in x 50 yd)


1U-8278 180J 50.8 mm x 45.7 m 1(2 in x 50 yd)

1U-8279 240J 50.8 mm x 45.7 m 1(2 in x 50 yd)

1U-8280 320J 50.8 mm x 45.7 m 1(2 in x 50 yd)

262-9741 400J 50.8 mm x 45.7 m 1(2 in x 50 yd)

Sheets

• These sheets are used for sanding and metal surface preparation• Engineered for maximum economy, fast cutting and smoothing action• Excellent for scouring, deburring, scale and rust removal

ID: C33517T1

Pkg.Part No. Grit Abrasive Size Qty.

1U-6854 60J Aluminum Oxide 228.6 x 279.4 mm 25(9 in x 11 in)






1U-8281 400A Silicon Carbide 228.6 x 279.4 mm 50(9 in x 11 in)



4C-8510 Crocus Ferrous Oxide 228.6 x 279.4 mm 50(9 in x 11 in)

266-3452 Emery Paper

• High quality, emery paper required for salvage or cleaning of numerous Caterpillar parts

• Light duty, fine polishing

02a.qxp 10/5/06 1:26 PM Page 23

ID: C54853T1

Pkg. Maximum OptimumPart No. Qty. Diameter Operating Speed Operating Speed Use With:

4C-8624 25 38.1 mm 24,000 18,000 Straight-shaft Tools(11⁄2 in)

4C-8625 25 50.8 mm 24,000 18,000 Straight-shaft Tools(2 in)



4C-8628 10 114.3 mm 18,000 15,000 Straight-shaft Tools(41⁄2 in)

Surface Conditioning Belts

• Excellent tool to polish crankshafts• Ideal for high tension applications• Unique, reinforced construction delivers a uniform, consistent finish that can be applied with abrasive belt machinery• Surface conditioning belts are reinforced which allows the material to be spliced into a continuous belt• Their open construction resists loading and heat buildup that normally affects belt life and performance• As it wears, the surface conditioning material exposes fresh abrasive mineral to the work surface, providing

consistent results throughout the belt’s life

Density 5

Color Tan

Grade Super fine

ID: C33445T1

Pkg. Wheel Maximum OptimumPart No. Qty. Size Operating Speed Operating Speed Use With

6V-3044 12 25.4 mm x 165.1 cm 6,500 SFPM 5,500 SFPM Abrasive(1 in x 65 in) belt machinery

Sanding Belts

• Used with any 7.62 x 53.34 cm (3 x 21 in) belt sander• Material: aluminum oxide with cloth back

ID: D01455T1

Part No. Grade

262-9742 36 grit - coarse

262-9743 80 grit - medium

262-9744 120 grit - fine

262-9745 220 grit - super fine


Miscellaneous AbrasiveSh

op S

uppl

ies

Cleaning and Polishing Stars

• Perfect choice for cleaning and polishing the inside diameters of pipe, tubing, cylinders and other interior spaces• Star shape allows the star tips to provide constant outward pressure on the walls to produce uniform and consistent results• Can be mounted singly or in multiples for efficient inside diameter cleaning and polishing operations• Adapter: 4C-8629 Mandrel

02a.qxp 10/5/06 1:26 PM Page 24

ID: C27132T1

Surface Reconditioning Flex Hone Tools

• The FLEX-HONE® process (Superfinishing) produces a controlled surface condition that will result in:- Lowered oil consumption- Less blow-by- Less friction- Plateaued finish over 50%- Finish free from cut, and folded metal

• All abrasive is silicone carbide• Resilient, flexible, honing tool with soft cutting action• Abrasive (points) globules each have independent suspension that assures the hone

to be self-centering, self-aligning to the bore, and self-compensating for wear• A low temperature abrading process that exposes the undisturbed base metal structure

to produce a long wearing surface• Method of developing a surface on a metal part which is optically smooth and metallurgically

free of any fragmented, amorphous or smeared metal from previous operations• Accomplished at a low pressure where the “stones” float• Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or valleys

for oil retention as opposed to the uni-directional or uneven valleys common to the conventional type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced by the hone.

Pkg. EnginePart No. Qty. Bore Size Grit

4C-6322 1 101.6 mm (4 in) 180

4C-6323 1 107.95 mm (41⁄4 in) 180

4C-6324 1 117.3 mm (41⁄2 in) 180

1U-9787 1 120.65-127 mm (43⁄4 in-5 in) 180

4C-6325 1 133.5-137.16 mm (51⁄4 in-5.4 in) 180

4C-6326 1 146.05-152.4 mm (53⁄4 in-6 in) 180

4C-6327 1 158.75 mm (61⁄4 in) 180

4C-6328 1 169.92-177.8 mm (6.69 in-7 in) 180

4C-6329 1 190.5 mm (71⁄2 in) 180

4C-6330 1 203.2 mm (8 in) 180

4C-6331 1 241.3 mm (91⁄2 in) 180

4C-6332 1 60.33 mm (23⁄8 in) 240

4C-6333 1 79.38 mm (31⁄8 in) 240

4C-6334 1 92.08 mm (35⁄8 in) 240

1U-7428 1 101.6 mm (4 in) 240

4C-6335 1 104.78 mm (41⁄8 in) 240

4C-6336 1 114.3 mm (41⁄2 in) 240

4C-6337 1 12.7 mm (1⁄2 in) 320

4C-6338 1 15.88 mm (5⁄8 in) 320

4C-6339 1 19 mm (3⁄4 in) 320

4C-6340 1 25.4 mm (1 in) 320

4C-6341 1 38.1 mm (11⁄2 in) 320



ID: C44148T1

Mounted Points

• Mounted wheels are used with horizontal or straight shaft, die and pencil grinders on jobs where larger wheels will not fit

• Offer maximum performance for grinding ferrous metals• Accurate spindles ensure precision grinding and minimize run-out• A-shaped wheels are for medium to heavy-duty blending and contouring• W-shaped wheels are for off-hand and precision grinding of medium to heavy stock

Size Mandrel Pkg.Part No. Shape Grit Spec. Dia. x Length Dia. Qty.

1U-6820 A1 A36 19 mm x 63.5 mm (3⁄4 in x 21⁄2 in) 6.35 mm (1⁄4 in) 25

1U-6821 A1 A60 19 mm x 63.5 mm (3⁄4 in x 21⁄2 in) 6.35 mm (1⁄4 in) 25

1U-6822 A3 A36 25.4 mm x 69.85 mm (1 in x 23⁄4 in) 6.35 mm (1⁄4 in) 25

1U-6823 A3 A60 25.4 mm x 69.85 mm (1 in x 23⁄4 in) 6.35 mm (1⁄4 in) 25

4C-3845 A4 A60 31.75 mm x 31.75 mm (11⁄4 in x 11⁄4 in) 6.35 mm (1⁄4 in) 25

4C-3846 A5 A36 19 mm x 28.58 mm (3⁄4 in x 11⁄8 in) 6.35 mm (1⁄4 in) 25

1U-6824 A11 A36 22.23 mm x 50.8 mm (7⁄8 in x 2 in) 6.35 mm (1⁄4 in) 25

1U-6825 A11 A60 22.23 mm x 50.8 mm (7⁄8 in x 2 in) 6.35 mm (1⁄4 in) 25



6V-4802 A37 A60 31.75 mm x 31.75 mm (11⁄4 in x 11⁄4 in) (with hub) 6.35 mm (1⁄4 in) 25

1U-6826 A38 A60 25.4 mm x 25.4 mm (1 in x 1 in) 6.35 mm (1⁄4 in) 25

4C-3852 A39 A60 19 mm x 19 mm (3⁄4 in x 3⁄4 in) 6.35 mm (1⁄4 in) 25

4C-3853 W220 A60 25.4 mm x 25.4 mm (1 in x 1 in) 6.35 mm (1⁄4 in) 25

4C-3854 W235 A60 38.1 mm x 6.35 mm (11⁄2 in x 1⁄4 in) (with hub) 6.35 mm (1⁄4 in) 25

4C-3855 W236 A60 38.1 mm x 12.7 mm (11⁄2 in x 1⁄2 in) (with hub) 6.35 mm (1⁄4 in) 25

4C-3856 W237 A60 38.1 mm x 25.4 mm (11⁄2 in x 1 in) 6.35 mm (1⁄4 in) 25

02a.qxp 10/5/06 1:26 PM Page 25

Cones and Plugs

• Use on horizontal shaft and vertical shaft grinders• Choose these for welding shop jobs such as:

- Grinding and smoothing fillets and corners- Internal grinding- Blending contours- Work in confined areas

• Center holes have molded-in bushings, available in 5⁄8 inch-11 threads to fit most popular grinder spindles

Available in four shapes:

• Type 16 with rounded tip for grinding mild contours or flat surfaces• Type 17 with square tip for beveling workpiece edges prior to welding• Type 18 square plugs for use on straight shaft grinders for work on flat surfaces• Type 18R also called pot balls, for work requiring straight sides and rounded tips

ID: C80473T1

Size Pkg.Item Part No. Grit Spec. OD x Length x Thread Qty.

Type 18 1U-6814 A24 38.1 mm x 63.5 mm x 5⁄8 in-11 (11⁄2 in x 21⁄2 in x 5⁄8 in-11) 10

Type 18R 1U-6815 A24 38.1 mm x 63.5 mm x 5⁄8 in-11 (11⁄2 in x 21⁄2 in x 5⁄8 in-11) 10

Type 16 1U-6812 A24 38.1 mm x 76.2 mm x 5⁄8 in-11 (11⁄2 in x 3 in x 5⁄8 in-11) 10

Type 18R 1U-6816 A24 50.8 mm x 76.2 mm x 5⁄8 in-11 (2 in x 3 in x 5⁄8 in-11) 10

Type 17 1U-6813 A24 63.5 mm x 76.2 mm x 5⁄8 in-11 (21⁄2 in x 3 in x 5⁄8 in-11) 10

Carbide and Aluminum Carbide Burs

Carbide Burs• Ideally used on high speed die grinders• ”Double cut” designed burs provide rapid stock removal in tough applications• Procduces small chips• A variety of shapes for most applications• Excellent for grinding and shaping most metallic and non-metallic materials

Pkg. Part No Size Shape Shank Qty.

236-8093 9.53 mm x 15.88 mm (3⁄8 in x 5⁄8 in) Egg 6.35 mm (1⁄4 in) 1

236-8094 9.53 mm (3⁄8 in) Ball 6.35 mm (1⁄4 in) 1

236-8095 9.53 mm x 19 mm (3⁄8 in x 3⁄4 in) Pointed Tree 6.35 mm (1⁄4 in) 1

236-8096 9.53 mm x 19 mm (3⁄8 in x 3⁄4 in) Cylindrical 6.35 mm (1⁄4 in) 1

236-8097 9.53 mm x 19 mm (3⁄8 in x 3⁄4 in) Round Nose 6.35 mm (1⁄4 in) 1

236-8098 9.53 mm x 26.99 mm (3⁄8 in x 11⁄16 in) Cone Radius End 6.35 mm (1⁄4 in) 1

236-8100 3.18 mm x 14.29 mm (1⁄8 in x 9⁄16 in) Flat End Cut 3.18 mm (1⁄8 in) 1

236-8101 3.18 mm x 14.29 mm (1⁄8 in x 9⁄16 in) Round End 3.18 mm (1⁄8 in) 1

262-9746 6.35 mm x 19 mm (1⁄4 in x 3⁄4 in) Cylindrical 6.35 mm (1⁄4 in) 1

262-9747 12.7 mm x 25.4 mm (1⁄2 in x 1 in) Cylindrical 6.35 mm (1⁄4 in) 1

262-9748 6.35 mm x 19 mm (1⁄4 in x 3⁄4 in) Cylindrical 6.35 mm (1⁄4 in) 1Aluminum Carbide Burs• For use with non-ferrous metals and non-metallic materials• Wide clearance and end mill type geometry of the flutes promotes

fast stock removal with minimum loading• Material: tungsten carbide

Pkg. Part No Size Shape Qty.

236-8103 9.53 mm x 19 mm (3⁄8 in x 3⁄4 in) Round Nose 1

236-8104 9.53 mm x 19 mm (3⁄8 in x 3⁄4 in) Cylindrical 1


Miscellaneous AbrasiveSh

op S

uppl

ies

Spira Bands and Mandrels

• Ideal for grinding, blending, deburring, finishing and polishing flat and contoured surfaces• Design eliminates lap bumping marks, provides chatter free operation• Good alternative tools for flap wheels

ID: C33518T1

Pkg.Part No. Grit Size Qty.

4C-3778 60 19 mm x 25.4 mm 1(3⁄4 in x 1 in)

4C-3779 60 25.4 mm x 25.4 mm 1(1 in x 1 in)

4C-3780 60 38.1 mm x 38.1 mm 1(11⁄2 in x 11⁄2 in)

4C-3781 60 50.8 mm x 25.4 mm 1(2 in x 1 in)

4C-3782 Mandrel 1⁄4 in 19 mm x 25.4 mm 1(3⁄4 in x 1 in)

4C-3783 Mandrel 1⁄4 in 25.4 mm x 25.4 mm 1(1 in x 1 in)

4C-3784 Mandrel 1⁄4 in 38.1 mm x 38.1 mm 1(11⁄2 in x 11⁄2 in)

4C-3785 Mandrel 1⁄4 in 50.8 mm x 25.4 mm 1(2 in x 1 in)

02a.qxp 10/5/06 1:26 PM Page 26

ID: D00684T1

Screen-Bak Durite Rolls

• Use for superfast makeready of copper pipe joints• Removes scale, corrosion and oxidations without clogging — sanding residue falls through the backing• Long abrasive life and clean, tight connections are ensured• Silicon carbide abrasive grain is coated on both sides of an open weave, cloth backing

4C-8522 11⁄2 in x 25 ft (Grit 80)

4C-8523 11⁄2 in x 25 ft (Grit 120)

4C-8524 11⁄2 in x 25 ft (Grit 180)

Decal Remover

• Fast and easy method to remove vinyl decals, graphics, tapes, films and adhesives without damaging paint — no fire danger because the discs are non combustible

• Unique construction of the disc assures long life and allows easy conformability to contours

• Discs are flexible and have no sharp edges — will not damage acrylic, enamel or urethane paint. (not recommended for use on acrylic lacquer paints or plexiglass)

• Faster and cleaner to use than solvent or chemical adhesive removers• RPM is critical for product performance — maximum RPM is 4500;

recommended RPM is 3,000 to 4,000



ID: C62937T1

PackagePart No. Description Quantity Diameter Use with:

226-0125 Decal Removal Disc 1 101.6 mm x 9.53 mm Electric or Air Drill(4 in x 3⁄8 in)

226-0126 Retainer Roloc 1 25.4 mm x 6.35 mmand Holder (1 in x 1⁄4 in)

264-4353 Single Edge Razor Blades

• Industrial quality• Ideal for scraping paint and glass, cutting, and trimming• Fits all standard razor blade tools• Gauge: 0.009• Quantity: 5 per package/100 per carton

ID: D01323T1

264-0414 File Set, 8 piece

• Files meet Federal Specification #GGG-F-325B• Manufactured under ISO 9002 Certification• Files and wood file handles can be ordered separately• Material: high carbon steel


263-9067 Aluminum File, 254 mm (10 in)

263-9069 Half Round Bastard File, 254 mm (10 in)

263-9070 Mill Bastard File, 203.2 mm (8 in)

263-9071 Round File, 4.8 mm (3⁄16) diameter x 203.2 mm (8 in) long

263-9072 Slim Taper File, 152.4 mm (6 in)

263-9074 Mill Bastard File, 152.4 mm (6 in)

263-9075 Wood File Handle for file lengths between 152.4 mm (6 in) to 203.2 mm (8 in)

263-9076 Wood File Handle for file lengths between 203.2 mm (8 in) to 254 mm (10 in)

02a.qxp 10/5/06 1:26 PM Page 27

Part No. Size

1U-5606 21⁄64 in

1U-5607 11⁄32 in

1U-5608 23⁄64 in

1U-5609 3⁄8 in

1U-5610 25⁄64 in

1U-5611 13⁄32 in

1U-5612 27⁄64 in

1U-5613 7⁄16 in

1U-5614 29⁄64 in

1U-5615 15⁄32 in

1U-5616 31⁄64 in

1U-5617 1⁄2 in

Reduced Shank Drills

• 118° point• High quality M-7 steel• 1⁄2 inch diameter shank• Black finish

Applications• Large hole drilling• Mild steel• Cast iron

DrillsThe Shop Supplies and Tools Group has a comprehensive line of high quality drill bits. The product offering includes drills ranging from standard jobberlength, general purpose drills, to high quality, long lasting cobalt drills, 118° and 135° split point configurations.

Standard Drills

• 118° point• High quality M-7 steel• Straight shank jobber length

Applications• Mild steel• Cast iron

ID: C33398T1

1U-5889 Drill Set (Plus Index), 13 Piece

Part No. Size

1U-5589 1⁄16 in

1U-5590 5⁄64 in

1U-5591 3⁄32 in

1U-5592 7⁄64 in

1U-5593 1⁄8 in

1U-5594 9⁄64 in

1U-5595 5⁄32 in

1U-5596 11⁄64 in

1U-5597 3⁄16 in

1U-5598 13⁄64 in

1U-5599 7⁄32 in

1U-5600 15⁄64 in

1U-5601 1⁄4 in


Part No. Size

1U-5589 1⁄16 in

1U-5590 5⁄64 in

1U-5591 3⁄32 in

1U-5592 7⁄64 in

1U-5593 1⁄8 in

1U-5594 9⁄64 in

1U-5595 5⁄32 in

1U-5596 11⁄64 in

1U-5597 3⁄16 in

Part No. Size

1U-5598 13⁄64 in

1U-5599 7⁄32 in

1U-5600 15⁄64 in

1U-5601 1⁄4 in

1U-5602 17⁄64 in

1U-5603 9⁄32 in

1U-5604 19⁄64 in

1U-5605 5⁄16 in

1U-5606 21⁄64 in

Part No. Size

1U-5607 11⁄32 in

1U-5608 23⁄64 in

1U-5609 3⁄8 in

1U-5610 25⁄64 in

1U-5611 13⁄32 in

1U-5612 27⁄64 in

1U-5613 7⁄16 in

1U-5614 29⁄64 in

1U-5615 15⁄32 in

1U-5616 31⁄64 in

1U-5617 1⁄2 in

Individual Drills

Part No. Size

1U-5586 1⁄64 in

1U-5587 1⁄32 in

1U-5588 3⁄64 in

1U-5589 1⁄16 in

1U-5590 5⁄64 in

1U-5591 3⁄32 in

1U-5592 7⁄64 in

1U-5593 1⁄8 in

1U-5594 9⁄64 in

1U-5595 5⁄32 in

1U-5596 11⁄64 in

Part No. Size

1U-5597 3⁄16 in

1U-6699 .021 in

1U-5598 13⁄64 in

1U-5599 7⁄32 in

1U-5600 15⁄64 in

1U-5601 1⁄4 in

1U-5602 17⁄64 in

1U-5603 9⁄32 in

1U-6700 .290 in

1U-5604 19⁄64 in

1U-5605 5⁄16 in


Drills Metal CuttingSh

op S

uppl

ies

Part No. Size

1U-7433 33⁄64 in

1U-5682 17⁄32 in

1U-5683 9⁄16 in

1U-7434 37⁄64 in

1U-5684 19⁄32 in

1U-5685 5⁄8 in

1U-5686 21⁄32 in

1U-5687 11⁄16 in

1U-7435 45⁄64 in

1U-5688 23⁄32 in

1U-5689 3⁄4 in

1U-5690 25⁄32 in

Part No. Size

1U-5691 13⁄16 in

1U-7436 53⁄64 in

1U-5692 27⁄32 in

1U-5693 7⁄8 in

1U-5694 29⁄32 in

1U-5695 15⁄16 in

1U-5696 31⁄32 in

1U-5697 1 in

1U-5698 11⁄32 in

1U-5699 11⁄16 in

1U-5700 13⁄32 in

1U-5701 11⁄8 in

Part No. Size

1U-5702 15⁄32 in

1U-5703 13⁄16 in

1U-5705 11⁄4 in

1U-5707 15⁄16 in

1U-5709 13⁄8 in

1U-5711 17⁄16 in

1U-5713 11⁄2 in

1U-7437 19⁄16 in (3⁄4 inch Shank)

1U-7438 113⁄26 in (3⁄4 inch Shank)

Individual Drills

02a.qxp 10/5/06 1:26 PM Page 28

Heavy-Duty Drills, 135° Split Point

• Self-centering point• More aggressive drill point — can cut drill time by 50%• High quality M-7 steel• Straight shank jobber length

Applications• Drilling in alloy steels such as bolts• Mild steel• Cast iron

ID: C33399T1

1U-5892 Drill Set (PlusIndex), 13 Piece

Part No. Size

1U-5621 1⁄16 in

1U-5622 5⁄64 in

1U-5623 3⁄32 in

1U-5624 7⁄64 in

1U-5625 1⁄8 in

1U-5626 9⁄64 in

1U-5627 5⁄32 in

1U-5628 11⁄64 in

1U-5629 3⁄16 in

1U-5630 13⁄64 in

1U-5631 7⁄32 in

1U-5632 15⁄64 in

1U-5633 1⁄4 in


Part No. Size

1U-5621 1⁄16 in

1U-5622 5⁄64 in

1U-5623 3⁄32 in

1U-5624 7⁄64 in

1U-5625 1⁄8 in

1U-5626 9⁄64 in

1U-5627 5⁄32 in

1U-5628 11⁄64 in

1U-5629 3⁄16 in

1U-5630 13⁄64 in

Part No. Size

1U-5631 7⁄32 in

1U-5632 15⁄64 in

1U-5633 1⁄4 in

1U-5634 17⁄64 in

1U-5635 9⁄32 in

1U-5636 19⁄64 in

1U-5637 5⁄16 in

1U-5638 21⁄64 in

1U-5639 11⁄32 in

1U-5640 23⁄64 in

Part No. Size

1U-5641 3⁄8 in

1U-5642 25⁄64 in

1U-5643 13⁄32 in

1U-5644 27⁄64 in

1U-5645 7⁄16 in

1U-5646 29⁄64 in

1U-5647 15⁄32 in

1U-5648 31⁄64 in

1U-5649 1⁄2 in

Individual Drills

Part No. Size

1U-5620 3⁄64 in

1U-5621 1⁄16 in

1U-5622 5⁄64 in

1U-5623 3⁄32 in

1U-5624 7⁄64 in

1U-5625 1⁄8 in

1U-5626 9⁄64 in

1U-5627 5⁄32 in

1U-5628 11⁄64 in

1U-5629 3⁄16 in

Part No. Size

1U-5630 13⁄64 in

1U-5631 7⁄32 in

1U-5632 15⁄64 in

1U-5633 1⁄4 in

1U-5634 17⁄64 in

1U-5635 9⁄32 in

1U-5636 19⁄64 in

1U-5637 5⁄16 in

1U-5638 21⁄64 in

1U-5639 11⁄32 in

Part No. Size

1U-5640 23⁄64 in

1U-5641 3⁄8 in

1U-5642 25⁄64 in

1U-5643 13⁄32 in

1U-5646 29⁄64 in

1U-5644 27⁄64 in

1U-5645 7⁄16 in

1U-5647 15⁄32 in

1U-5648 31⁄64 in

1U-5649 1⁄2 in

Extra Heavy-Duty Cobalt Drills, 135° Split Point

• Excellent abrasion resistance coupled with high hardness characteristics

• Self-centering point• Can cut drill time by 50%• Straight shank jobber length

Applications• Most high alloy steels• Stainless steel• Easily drills grade 8 bolts


Metal Cutting DrillsShop Supplies

ID: C33400T1


Part No. Size

1U-5386 1⁄16 in

1U-5387 5⁄64 in

1U-5388 3⁄32 in

1U-5389 7⁄64 in

1U-5390 1⁄8 in

1U-5391 9⁄64 in

1U-5392 5⁄32 in

1U-5393 11⁄64 in

1U-5394 3⁄16 in

1U-5395 13⁄64 in

1U-5396 7⁄32 in

1U-5397 15⁄64 in

1U-5398 1⁄4 in


Part No. Size

1U-5386 1⁄16 in

1U-5387 5⁄64 in

1U-5388 3⁄32 in

1U-5389 7⁄64 in

1U-5390 1⁄8 in

1U-5391 9⁄64 in

1U-5392 5⁄32 in

1U-5393 11⁄64 in

1U-5394 3⁄16 in

1U-5395 13⁄64 in

Part No. Size

1U-5396 7⁄32 in

1U-5397 15⁄64 in

1U-5398 1⁄4 in

1U-5399 17⁄64 in

1U-5400 9⁄32 in

1U-5401 19⁄64 in

1U-5402 5⁄16 in

1U-5403 21⁄64 in

1U-5404 11⁄32 in

1U-5405 23⁄64 in

Part No. Size

1U-5406 3⁄8 in

1U-5407 25⁄64 in

1U-5408 13⁄32 in

1U-5409 27⁄64 in

1U-5410 7⁄16 in

1U-5411 29⁄64 in

1U-5412 15⁄32 in

1U-5413 31⁄64 in

1U-5414 1⁄2 in

Individual Drills

Part No. Size

1U-5386 1⁄16 in

1U-5387 5⁄64 in

1U-5388 3⁄32 in

1U-5389 7⁄64 in

1U-5390 1⁄8 in

1U-5391 9⁄64 in

1U-5392 5⁄32 in

1U-5393 11⁄64 in

1U-5394 3⁄16 in

1U-5395 13⁄64 in

1U-5396 7⁄32 in

Part No. Size

1U-5397 15⁄64 in

1U-5398 1⁄4 in

1U-5399 17⁄64 in

1U-5400 9⁄32 in

1U-5401 19⁄64 in

1U-5402 5⁄16 in

1U-5403 21⁄64 in

1U-5404 11⁄32 in

1U-5405 23⁄64 in

1U-5406 3⁄8 in

1U-5407 25⁄64 in

Part No. Size

1U-5408 13⁄32 in

1U-5409 27⁄64 in

1U-5410 7⁄16 in

1U-5411 29⁄64 in

1U-5412 15⁄32 in

1U-5413 31⁄64 in

1U-5414 1⁄2 in

1U-8764 5⁄8 in (1⁄2 inch Shank)

1U-8765 3⁄4 in (1⁄2 inch Shank)

02a.qxp 10/5/06 1:26 PM Page 29

ID: C41288T1

4C-3385 Drill Index

• Empty drill index for storing 29 different sizes of jobber length drill bits from1⁄16 inch to 1⁄2 inch in 1⁄64 inch increments

• Typical use: left hand drills

4C-4426 Drill Extension

• Extends drill reach 304.8 mm (12 in)• Accepts up to 1⁄4 inch diameter shank

Recommended Drill Sizes for Metric ThreadThread Drill Dia. Part No.Size Needed Used

M1.6 1.35 mm 1U-8123

M2 1.70 mm 1U-8125

M2.5 2.20 mm 1U-8130

M3 2.60 mm 1U-8134

M4 3.40 mm 1U-8140

Thread Drill Dia. Part No.Size Needed Used

M5 4.30 mm 1U-8146

M6 5.20 mm 1U-8152

M8 7.00 mm 1U-8159

M10 8.70 mm 1U-8165

M12 10.50 mm 1U-8169

Aircraft Drills

• 135° split point, self-centering capability• High quality M-7 steel• 12 inch length

Applications• Drilling in alloy steels such as bolts• Mild steel• Cast iron

Individual Drills (set not available)

Part No. Size

4C-4411 1⁄16 in

4C-4412 3⁄32 in

4C-4413 1⁄8 in

4C-4414 5⁄32 in

4C-4415 3⁄16 in

4C-4416 7⁄32 in

4C-4417 1⁄4 in

4C-4418 9⁄32 in

Part No. Size

4C-4419 5⁄16 in

4C-4420 11⁄32 in

4C-4421 3⁄8 in

4C-4422 13⁄32 in

4C-4423 7⁄16 in

4C-4424 15⁄32 in

4C-4425 Drill, 1⁄2 in

Left Hand Drills

• Index set not available• 135° split point• Self-centering capability• M-7 steel• Excellent for removing broken

studs and fasteners

Part No. Size

4C-3335 1⁄16 in

4C-3336 5⁄64 in

4C-3337 3⁄32 in

4C-3338 7⁄64 in

4C-3339 1⁄8 in

4C-3340 9⁄64 in

4C-3341 5⁄32 in

4C-3342 11⁄64 in

4C-3343 3⁄16 in

4C-3344 13⁄64 in

4C-3345 7⁄32 in

Part No. Size

4C-3346 13⁄64 in

4C-3347 1⁄4 in

4C-3348 17⁄64 in

4C-3349 9⁄32 in

4C-3350 19⁄64 in

4C-3351 5⁄16 in

4C-3352 21⁄64 in

4C-3353 11⁄32 in

4C-3354 23⁄64 in

4C-3355 3⁄8 in

4C-3356 25⁄64 in

Metric Standard Drills

• 118° point• High quality M-7 steel• Black fnish• Wide range of diameters —

1 mm to 12.5 mm• Straight shank

Part No. Size

1U-8121 1.00 mm

1U-8122 1.20 mm

1U-8123 1.35 mm

1U-8124 1.50 mm

1U-8125 1.70 mm

1U-8126 1.80 mm

1U-8127 1.90 mm

1U-8128 2.00 mm

1U-8129 2.10 mm

1U-8130 2.20 mm

1U-8131 2.30 mm

1U-8132 2.40 mm

1U-8133 2.50 mm

1U-8134 2.60 mm

1U-8135 2.70 mm

Part No. Size

1U-8136 2.80 mm

1U-8137 2.90 mm

1U-8138 3.00 mm

1U-8139 3.20 mm

1U-8140 3.40 mm

1U-8141 3.50 mm

1U-8142 3.60 mm

1U-8143 3.90 mm

1U-8144 4.00 mm

1U-8145 4.10 mm

1U-8146 4.30 mm

1U-8147 4.50 mm

1U-8148 4.60 mm

1U-8149 4.70 mm

1U-8150 4.80 mm

Part No. Size

1U-8151 5.00 mm

1U-8152 5.20 mm

1U-8153 5.50 mm

1U-8154 5.60 mm

1U-8155 5.80 mm

1U-8156 6.00 mm

1U-8157 6.50 mm

1U-8158 6.80 mm

1U-8159 7.00 mm

1U-8160 7.50 mm

1U-8161 8.00 mm

1U-8162 8.20 mm

1U-8163 8.50 mm

1U-8164 8.60 mm

1U-8165 8.70 mm


Drills Metal CuttingSh

op S

uppl

ies

Part No. Size

1U-8166 9.00 mm

1U-8167 9.50 mm

1U-8168 10.00 mm

1U-6865 10.00 mm (Premium Grade Steel)

1U-8169 10.50 mm

1U-8170 11.00 mm

1U-8171 11.50 mm

1U-8172 12.00 mm

1U-6866 12.00 mm (Premium Grade Steel)

1U-8173 12.20 mm

1U-8174 12.50 mm

Thread Drill Dia. Part No.Size Needed Used

M14 12.20 mm 1U-8173

M20 18.00 mm 1U-8184

M24 21.50 mm 1U-8190

M27 23 mm 214-3634

M30 27.00 mm 1U-8194

M36 32.50 mm 1U-8201

Part No. Size

4C-3357 13⁄32 in

4C-3358 27⁄64 in

4C-3359 7⁄16 in

4C-3360 28⁄64 in

4C-3361 15⁄32 in

4C-3362 31⁄64 in

4C-3363 1⁄2 in

02a.qxp 10/5/06 1:26 PM Page 30

Taps and Dies

Abbreviations Used for Taps and DiesNF American National Fine Thread Series

NC American National Coarse Thread Series

NS American National Thread — Special

H1 Tolerance Limit of Ground Thread Tap



PD Pitch Diameters

D5 Tolerance Limit of Ground Thread Metric Tap



NPT National Standard Pipe Form

NPTT American Standard Dryseal Pipe Form

Hand Taps

• Caterpillar offers five types of hand taps, available by individual part numbers and in sets (indexes).- Machine screw- Fractional- Taper pipe- Special thread taps- Metric

• Made of high speed M-7 steel for longer life• These are ground thread taps providing tolerance

designed for Class 2 Thread, exceeds quality of carbon steel taps

• Offered in tapered, plug and bottoming versions


Metal Cutting Taps and DiesShop Supplies

Machine ScrewsMachine Screw Sizes — Individual

Part NumbersNominal Threads Pitch Dia. No. of Thread OverallSize Per Inch Limits Flutes Taper Plug Bottoming Length Length

0 80 NF H1 2 — 1P-3001 — 5⁄16 in 15⁄8 in

1 64 NC H1 2 — 1P-3002 — 3⁄8 in 111⁄16 in

1 72 NF H1 2 — 1P-3003 — 3⁄8 in 111⁄16 in

2 56 NC H2 3 — 1P-3004 — 7⁄16 in 13⁄4 in

2 64 NF H2 3 — 1P-3005 — 7⁄16 in 13⁄4 in

3 48 NC H2 3 — 1P-3006 — 1⁄2 in 113⁄16 in

3 56 NF H2 3 — 1P-3007 — 1⁄2 in 113⁄16 in

4 40 NC H2 3 4C-5008 1P-3008 4C-5015 9⁄16 in 17⁄8 in

4 48 NF H2 3 — 1P-3009 — 9⁄16 in 17⁄8 in

5 40 NC H2 3 — 1P-3010 — 5⁄8 in 115⁄16 in

5 44 NF H2 3 — 1P-3011 — 5⁄8 in 115⁄16 in

6 32 NC H3 3 4C-5009 1P-3012 4C-5016 11⁄16 in 2 in

6 40 NF H2 3 — 1P-3013 — 11⁄16 in 2 in

8 32 NC H3 4 4C-5010 1P-3014 4C-5017 3⁄4 in 21⁄8 in

8 36 NF H2 4 — 1P-3015 — 3⁄4 in 21⁄8 in

10 24 NC H3 4 4C-5011 1P-3016 4C-5018 7⁄8 in 23⁄8 in

10 32 NF H3 4 4C-5012 1P-3017 4C-5019 7⁄8 in 23⁄8 in

12 24 NC H3 4 4C-5013 1P-3018 4C-5020 15⁄16 in 23⁄8 in

12 28 NC H3 4 4C-5014 1P-3019 4C-5021 15⁄16 in 23⁄8 in

1P-3020 Machine Screw Set• Contains plug taps from 0-80 through 12-28 in National Fine and 1-64 through

12-24 in National Coarse Threads• Includes plastic index

ID: C07893T1

02a.qxp 10/5/06 1:26 PM Page 31

Fractional Size TapsFractional Size Taps — Individual

Part NumbersNominal Threads Pitch Dia. No. of Thread OverallSize (inch) Per Inch Limits Flutes Taper Plug Bottoming Length Length1⁄4 20 NC H3 4 4C-4989 1P-3021 4C-4971 1 in 21⁄2 in1⁄4 28 NF H3 4 4C-4990 1P-3022 4C-4972 1 in 21⁄2 in5⁄16 18 NC H3 4 4C-4991 1P-3023 4C-4973 11⁄8 in 223⁄32 in5⁄16 24 NF H3 4 4C-4992 1P-3024 4C-4974 11⁄8 in 223⁄32 in3⁄8 16 NC H3 4 4C-4993 1P-3025 4C-4975 11⁄4 in 215⁄16 in3⁄8 24 NF H3 4 4C-4994 1P-3026 4C-4976 11⁄4 in 215⁄16 in7⁄16 14 NC H3 4 4C-4995 1P-3027 4C-4977 17⁄16 in 35⁄32 in7⁄16 20 NF H3 4 4C-4996 1P-3028 4C-4978 17⁄16 in 35⁄32 in1⁄2 13 NC H3 4 4C-4997 1P-3029 4C-4979 121⁄32 in 33⁄8 in1⁄2 20 NF H3 4 4C-4998 1P-3030 4C-4980 121⁄32 in 33⁄8 in9⁄16 12 NC H3 4 — 1P-3031 — 121⁄32 in 319⁄32 in9⁄16 14NF 2B-92569⁄16 18 NF H3 4 — 1P-3032 — 121⁄32 in 319⁄32 in5⁄8 11 NC H3 4 4C-4999 1P-3033 4C-4981 113⁄16 in 313⁄16 in5⁄8 18 NF H3 4 4C-5000 1P-3034 4C-4982 113⁄16 in 313⁄16 in3⁄4 10 NC H3 4 4C-5001 1P-3035 4C-4983 2 in 41⁄4 in3⁄4 12 NF 2B-25263⁄4 16 NF H3 4 4C-5002 1P-3036 4C-4984 2 in 41⁄4 in7⁄8 9 NC H4 4 4C-5003 1P-3037 4C-4985 27⁄32 in 411⁄16 in7⁄8 14 NF H4 4 4C-5004 1P-3038 4C-4986 27⁄32 in 411⁄16 in

1 8 NC H4 4 4C-5005 1P-3039 4C-4987 21⁄2 in 51⁄8 in1 12 NF H4 4 4C-5006 1P-3040 4C-4988 21⁄2 in 51⁄8 in1 14 NF H4 4 4C-5007 1P-7421 5P-3011 21⁄2 in 51⁄8 in

11⁄16 12 NF H4 4 — 1U-6539 — 21⁄2 in 51⁄8 in

11⁄8 7 NC — 4 — 1U-9707 — 21⁄2 in 5.4 in11⁄8 12 NF H4 4 — 1P-3041 5P-3012 29⁄16 in 57⁄16 in

11⁄4 7 NC 4C-505111⁄4 12 NF H4 6 — 1P-3042 — 29⁄16 in 53⁄4 in

15⁄16 12 NF H4 6 — 1U-6540 — 29⁄16 in 53⁄4 in13⁄8 6 NC 1U-9709

13⁄8 12 NF H4 6 — 1P-3043 5P-3013 3 in 61⁄16 in11⁄2 12 NF H4 6 — 1P-3044 — 3 in 63⁄8 in

21⁄2 12 NC H6 6 199-3947 1 — — 3 in 7 in1 For reconditioning bevel pinion shaft bolt holes in 797 Off-Highway Trucks

1P-3070 Fractional Size Tap Set• Contains 10 plug taps• Includes plastic index

ID: B00047T1

1P-3050 Fractional Size Tap Set• Contains 20 plug taps• Includes 1P-3047 and 1P-3048 Tap Wrenches

ID: C07900T1


Taps and Dies Metal CuttingSh

op S

uppl

ies

Nominal ThreadsSize (inch) Per Inch1⁄4 20 NC1⁄4 28 NF5⁄16 18 NC5⁄16 24 NF3⁄8 16 NC3⁄8 24 NF7⁄16 14 NC7⁄16 20 NF1⁄2 13 NC1⁄2 20 NF

Nominal ThreadsSize (inch) Per Inch1⁄4 20 NC1⁄4 28 NF5⁄16 18 NC5⁄16 24 NF3⁄8 16 NC3⁄8 24 NF7⁄16 14 NC7⁄16 20 NF1⁄2 13 NC1⁄2 20 NF

Nominal ThreadsSize (inch) Per Inch9⁄16 12 NC9⁄16 18 NF5⁄8 11 NC5⁄8 18 NF3⁄4 10 NC3⁄4 16 NF7⁄8 9 NC7⁄8 14 NF

1 8 NC1 14 NC

02a.qxp 10/5/06 1:26 PM Page 32

ID: 75999-1T1

Rethreading Dies

• Caterpillar offers three types of rethreading dies, available by individual part number and in sets (indexes).- Hexagon and square rethreading fractional dies- Hexagon rethreading metric dies- Hexagon rethreading pipe dies

• Used to clean-up existing thread — not recommended to cut new threads• Made of conventional carbon steel (unless otherwise specified)• Conform to industry standards

1P-3000 Hexagon Rethreading Fractional Die Set• Contains 10 fractional, coarse thread dies• Contains 10 fractional, fine thread dies• Includes plastic index

Nominal Threads Part DimensionsSize (inch) Per Inch No. Across Flat Thickness1⁄4 20 NC 1P-2979 19⁄32 in 1⁄4 in

28 NF 1P-29805⁄16 18 NC 1P-2981 11⁄16 in 5⁄16 in

24 NF 1P-29823⁄8 16 NC 1P-2983 25⁄32 in 3⁄8 in

24 NF 1P-29847⁄16 14 NC 1P-2985 7⁄8 in 7⁄16 in

20 NF 1P-29861⁄2 13 NC 1P-2987 11⁄16 in 1⁄2 in

20 NF 1P-29889⁄16 12 NC 1P-2989 11⁄16 in 1⁄2 in

18 NF 1P-29905⁄8 11 NC 1P-2991 11⁄4 in 5⁄8 in

18 NF 1P-29923⁄4 10 NC 1P-2993 17⁄16 in 3⁄4 in

16 NF 1P-29947⁄8 9 NC 1P-2995 15⁄8 in 7⁄8 in

14 NF 1P-2996

1 8 NC 1P-2997 113⁄16 in 1 in14 NS 3P-2213

1P-2999 Case

4C-4963 Hexagon Rethreading Metric Die Set• Includes plastic index

DimensionsNominal Part AcrossSize (inch) No. Flat Thickness

M6 x 1.00 8T-3064 19⁄32 in 1⁄4 in

M8 x 1.25 8T-3066 11⁄16 in 5⁄16 in

M10 x 1.50 8T-3070 7⁄8 in 7⁄16 in

M12 x 1.75 8T-3074 11⁄16 in 1⁄2 in

M14 x 2.00 4C-4961 11⁄16 in 1⁄2 in

M16 x 2.00 8T-3078 11⁄4 in 5⁄8 in

M20 x 2.50 4C-4962 15⁄8 in 7⁄8 in

M16 x 1.00 4C-4182 11⁄4 in 7⁄16

Hexagon Rethreading Fractional Dies — Individual

Nominal Threads Part DimensionsSize (inch) Per Inch No. Across Flat Thickness1⁄4 20 NC 1P-2979 19⁄32 in 1⁄4 in

28 NF 1P-29805⁄16 18 NC 1P-2981 11⁄16 in 5⁄16 in

24 NF 1P-29823⁄8 16 NC 1P-2983 25⁄32 in 3⁄8 in

24 NF 1P-29847⁄16 14 NC 1P-2985 7⁄8 in 7⁄16 in

20 NF 1P-29861⁄2 13 NC 1P-2987 11⁄16 in 1⁄2 in

20 NF 1P-29889⁄16 12 NC 1P-2989 11⁄16 in 1⁄2 in

18 NF 1P-29905⁄8 11 NC 1P-2991 11⁄4 in 5⁄8 in

18 NF 1P-29923⁄4 10 NC 1P-2993 17⁄16 in 3⁄4 in

16 NF 1P-29947⁄8 9 NC 1P-2995 15⁄8 in 7⁄8 in

14 NF 1P-29961 8 NC 1P-2997 113⁄16 in 1 in

12 NF 1P-299814 NS 3P-2213

11⁄8 12 NF 4C-5494 2 in 1 in

Nominal Threads Part DimensionsSize (inch) Per Inch No. Across Flat Thickness

11⁄4 12 NF 4C-5495 23⁄16 in 1 in13⁄8 12 NF 4C-5496 23⁄8 in 1 in11⁄2 12 NF 4C-5497 29⁄16 in 1 in13⁄4 5 NF 5P-4238 3 in 11⁄4 inM4 x 0.70 8T-3062 19⁄32 in 1⁄4 inM5 x 0.80 8T-3063 19⁄32 in 1⁄4 inM7 x 1.00 8T-3065 11⁄16 in 5⁄16 inM9 x 1.00 8T-3067 25⁄32 in 3⁄8 inM9 x 1.25 8T-3068 25⁄32 in 3⁄8 inM10 x 1.25 8T-3069 7⁄8 in 7⁄16 inM11 x 1.50 8T-3071 7⁄8 in 7⁄16 inM12 x 1.25 8T-3072 11⁄16 in 1⁄2 inM12 x 1.50 8T-3073 11⁄16 in 1⁄2 inM13 x 1.50 8T-3075 11⁄16 in 1⁄2 inM14 x 1.50 9F-9398 — —M15 x 1.50 8T-3076 11⁄4 in 5⁄8 inM16 x 1.00 4C-4182 11⁄4 in 7⁄16 inM16 x 1.50 8T-3077 11⁄4 in 5⁄8 in



Hexagon Rethreading Metric Dies — Individual

Nominal DimensionsSize and Part AcrossPitch No. Flat Thickness

M6 x 1.00 8T-3064 19⁄32 in 1⁄4 in

M8 x 1.25 8T-3066 11⁄16 in 5⁄16 in

M10 x 1.50 8T-3070 7⁄8 in 7⁄16 in

M12 x 1.75 8T-3074 11⁄16 in 1⁄2 in

M14 x 2.00 4C-4961 11⁄16 in 1⁄2 in

M16 x 1.00 4C-4181 11⁄4 in 5⁄8 in

M16 x 2.00 8T-3078 11⁄4 in 5⁄8 in

M20 x 2.50 4C-4962 15⁄8 in 7⁄8 in

M30 x 3.50 4C-6722 23⁄16 in 1 in

Hexagon Rethreading Pipe Dies — Individual

ID: C41329T1Nominal Pipe Per Threads Dimensions AcrossSize (inch) Inch No. Part Flat Thickness1⁄8 27 4C-4957 11⁄16 in 3⁄8 in1⁄4 18 4C-4958 11⁄4 in 5⁄8 in3⁄8 18 4C-4959 17⁄16 in 5⁄8 in1⁄2 14 4C-4960 15⁄8 in 3⁄4 in

02a.qxp 10/5/06 1:26 PM Page 33

Universal Outside Thread Chasers

• Precision dies restore threads to their original condition to make reassembly of matching parts easier• Eliminates the need for expensive thread-cutting equipment• Tighten the tool slightly on the good threads, then back off over the damaged thread area to restore the threads

ID: C54852T1

OTC PerPart No. No. Capacity Description Weight

1U-7521 7402 4, 5, 6, 7, 71⁄2, 8, 9, 10, Standard Thread Chaser (complete with 6 dies) 1.36 kg (3 lbs)11, 111⁄2, 12, 14, 16, 18, 20, 24

1U-7610 202817 1 mm-1.25 mm-1.5 mm-1.75 mm; Dies only (3 dies) .45 kg (1 lb)2 mm-2.5 mm-3.0 mm-3.5 mm; 4 mm

154-9315 Thread File GroupSMCS Code: 4050-006, 0671Model: 311, 312, 312B, 315B, and 318B Excavators (Grenoble Version)

• Used to renew damaged external threads on any diameter shaft (right or left handed)• Cross-cut and thread proportional to thread pitch (helps eliminate file skipping

or jumping out of fine pitches)• Each file has eight separate pitches• Makes thread repairs without using a thread die• Red plastic handle protects hands• Each file is individually packaged in a plastic tube• Carrying pouch keeps files together• Files can also be ordered separately

ReferenceRENR1113 Service Manual, 312B Excavators Machine Systems Disassembly and AssemblySENR6139 Service Manual, 311 and 312 Excavators Machine Systems Disassembly and Assembly

ID: C79298T1

1

2

3

Item Part No. Description Pitch

1 154-9316 Metric Thread File 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, and 3.00154-9317 Inch Thread File 11, 12, 13, 14, 16, 18, 20, and 24 tpi154-9318 Inch Thread File 9, 10, 12, 16, 20, 27, 28, and 32 tpi154-9319 Pipe Thread File 8, 10, 111⁄2, 14, 16, 18, 24, and 27 tpi

2 Plastic handle

3 160-1749 Roll-up Pouch

Special Rethreading Dies

• Used for cleaning up damaged external threads• Not readily obtainable on the market because the threads are not common standards

ID: C07916T1

Part No. Size

9F-9397 24 mm x 1.5 mm Pitch

9F-9398 14 mm x 1.5 mm Pitch

1P-2998 1 in-12 UNF

5P-4238 13⁄4 in-5 NC

6V-7052 15⁄16 in-12 NF



op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 34

Taper Pipe Taps

Taper Pipe Taps — Individual

Nominal Pipe Threads No. of Thread OverallSize (inch) Per Inch Flutes Part No. Length Length1⁄16 27 4 4C-9747 — 54.10 mm (2.13 in)1⁄8 27 4 2P-5531 3⁄4 in 54.10 mm (2.13 in)1⁄4 18 4 2P-5532 11⁄16 in 61.98 mm (2.44 in)3⁄8 18 4 2P-5533 11⁄16 in 65.02 mm (2.56 in)1⁄2 14 4 2P-5534 13⁄8 in 79.50 mm (3.13 in)3⁄4 14 5 214-3635 13⁄8 in 82.55 mm (3.25 in)

NOTE: These are ground thread taps meeting requirements of right hand AmericanStandard Pipe Form (NPT) and American Standard Dryseal Pipe Form (NPTF). Dryseal tapsare used to tap fittings which will give a pressure tight joint without use of a “sealer”.

2P-5530 Taper Pipe Tap Set• Contains 4 taper pipe taps 1⁄8 inch, 1⁄4 inch, 3⁄8 inch

and 1⁄2 inch NPTF, shown above• Includes plastic index

ID: C07889T1

Metric Size Taps — Individual

Part NumbersNominal Pitch Dia. No. of OverallSize Limits Flutes Plug Bottoming Length inch

M4 x 0.7 — 4 8T-3079 — —

M5 x 0.8 D4 4 8T-3080 — 2.375 in

M6 x 1 D5 4 8T-3081 — 2.50 in

M7 x 1.0 — 4 8T-3082 — —

M8 x 1.25 D5 4 8T-3083 — 2.72 in

M9 x 1.0 — 4 8T-3084 — —

M9 x 1.25 — 4 8T-3085 — —

M10 x 1 D6 4 — 4C-5894 3.16 in

M10 x 1.25 — 4 8T-3086 — —

M10 x 1.50 D6 4 8T-3087 — 3.16 in

M11 x 1.50 — 4 8T-3088 — —

M12 x 1.25 — 4 8T-3089 — —

M12 x 1.50 — 4 8T-3090 — —

M12 x 1.75 D6 4 8T-3091 — 3.38 in

M13 x 1.50 — 4 8T-3092 — —

M14 x 1 D7 4 — 4C-6924 3.59 in

M14 x 1.50 — 4 8T-3093 — —

M14 x 2 D7 4 4C-4965 — 3.59 in

Part NumbersNominal Pitch Dia. No. of OverallSize Limits Flutes Plug Bottoming Length inch

M15 x 1.50 — 4 8T-3094 — —

M16 x 1.50 — 4 8T-3095 — —

M16 x 2 D6 4 — 4C-9645 2 8.00 in

M16 x 2 D7 4 8T-3096 — 3.81 in

M18 x 1.5 D6 4 9U-7283 — 4.03 in

M18 x 2.5 D7 4 4C-4966 — 4.03 in

M20 x 1.5 D7 4 9U-5794 1 — 4.47 in

M20 x 2.5 D7 4 4C-4967 — 4.47 in

M22 x 1.5 D6 4 156-8166 — 4.69 in

M24 x 3.0 D8 4 4C-4968 — 4.91 in

M30 x 3.5 D9 4 4C-4969 — 5.44 in

M36 x 4 D9 4 4C-4970 — 6.06 in

M42 x 4.5 D5 4 or 6 9U-6901 — 5.91 in

M48 x 5 D5 6 9U-6503 — 7.62 in

M64 x 6.0 D5 4 or 6 9U-6902 — 8.74 in

1 Used for 3406 Engines2 Used for aluminum heads



Special Thread Taps

• Used for cleaning up damaged threads• Not readily obtainable on the market because the threads are not common standards

Part No. Size

6V-2091 3⁄8 inch-16 Spiralock

9F-9396 24 mm-1.5 mm

7S-7093 7⁄8 inch-12 UN

5P-3012 11⁄8 inch-12 NF Bottom

1P-7422 2 inch-12 UN

1U-6600 11⁄8 inch-7 Spiralock

1U-9708 11⁄4 inch-7 Spiralock

1U-6725 13⁄8 inch-12 Buttress Bottoming Tap

1U-6726 13⁄4 inch-12 Buttress Bottoming Tap

02a.qxp 10/5/06 1:26 PM Page 35

ID: C54429T1

Tap Wrenches

• Caterpillar offers two types of tap wrenches:- T-Handle- Straight

• Designed for use in hand tapping but can also be used with reamers, drills, screw extractor or other hand cutting tools

• Jaws are made of carefully hardened and tempered steel• Ruggedly built yet nicely furnished

ID: C54430T1

T-Handle Tap Wrenches

Use With:Fractional Machine Metric

Description/Usage Part No. Length Taps Screw Taps Taps

Slip Handle 4C-5026 69.85 mm (2.75 in) 1⁄16 in - 1⁄4 in 0-14 1 - 6 mmThe T-Handle may be “slipped” from side to side to permit a complete turn in close quarters.

Plain Handle 4C-5027 69.85 mm (2.75 in) 1⁄16 in - 1⁄4 in 0-14 1 - 6 mmAn all purpose wrench with fixed handle. Ideal for ordinary out in the open tapping jobs.

Long Shank 4C-5028 222.25 mm (8.75 in) 1⁄16 in - 1⁄4 in 0-14 1 - 6 mmThe long shank permits tapping in hard to get at places encountered in machine and automobile repair work.

Ratchet 4C-5029 95.25 mm (3.75 in) 1⁄16 in - 1⁄4 in 0-14 1 - 6 mmThe combination of ratchet and slip handle make this an all around wrench capable of handling most hand tapping jobs.

Straight Tap Wrenches

Use With:Fractional Machine Pipe Metric

Description/Usage Part No. Length Taps Screw Taps Taps Taps

Solid Handle 1P-3047 279.40 mm (11 in) 5⁄32 in - 1⁄2 in 7-14 1⁄8 4 - 13 mm1P-3048 482.60 mm (19 in) 1⁄4 in - 11⁄8 in — 1⁄8 - 3⁄4 6 - 24 mm

These wrenches have solid handles, one of which is forged integral with the center. Adjustment is made by turning the movable handle.



op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 36

ID: C44052T1

Thread Inserts

Screw Thread InsertsThe Shop Supplies and Tools Group offers two different types of screw thread inserts. Both are used to repair damaged threads and can save money and speed up repairs.

Heli-Coil Inserts are:• Effective and universally accepted• Stainless steel• Provide leak tight joints (ex. spark plugs)

Keenserts® are:• Installed with standard drills and taps• No prewinder tool required• Easy to remove

Heli-Coil Inserts• Effective and universally accepted method of thread repair• Quickly and permanently restore stripped, worn or damaged threads to their original size and condition• Inserts work in any material: aluminum, magnesium, cast iron, bronze, etc• Increasing use of lightweight (and soft) materials means more thread damage — there is a Heli-Coil repair for virtually every application

Stainless Steel Heli-Coil inserts eliminate:

• Thread wear• Corrosion• Galling• Rustand provide...

• Stronger assemblies• High quality and reliability• Fastening integrity superior to the original

ReferenceFor detailed information on Heli-Coil Inserts order NEHP5567, “Screw Thread Inserts for Maintenance, Repair and Overhaul.” ID: C79650T1ID: C44051T1

Master Thread Repair Sets

• Both sets contain repairs for the most commonly used thread sizes• Two Master Sets for inch sizes are available: one for Inch Coarse (4C-8364) and one for Inch Fine (4C-8365)• The coarse set contains six sizes: 1⁄4 inch, 5⁄16 inch, 3⁄8 inch, 7⁄16 inch, 1⁄2 inch and 5⁄8 inch• The fine set has six sizes: #10, 1⁄4 inch 5⁄16 inch,3⁄8 inch, 7⁄16 inch and 1⁄2 inch• Each set has a drill, tap, installation tool, a quantity of inserts for each size, and complete instructions

NOTE: Installation tools, prewinder and mandrel included in Fine Series only.

4C-8364 — Inch Coarse Master Thread Repair Set

InsertThread Pkg. Insert Tap Drill InstallationSize and Length Part No. Qty. Part No. Size Tool Part No.1⁄4 in-20 x .375 in 4C-8419 12 4C-9681 17⁄64 in 8T-26925⁄16 in-18 x .469 in 4C-8420 12 4C-9682 21⁄64 in 8T-26953⁄8 in-16 x .562 in 4C-8421 12 4C-9683 25⁄64 in 8T-26987⁄16 in-14 x .656 in 4C-8422 6 4C-9684 29⁄64 in 8T-27031⁄2 in-13 x .750 in 4C-8423 6 4C-9685 17⁄32 in 8T-27065⁄8 in-11 x.938 in 4C-8425 6 4C-9686 21⁄32 in 6V-9083

4C-8365 — Inch Fine Master Thread Repair Set

InsertThread Pkg. Insert Tap Drill InstallationSize and Length Part No. Qty. Part No. Size Tool Part No.

10-32 x .285 in 4C-8433 12 4C-9687 13⁄64 in 8T-27271⁄4 in-28 x .375 in 4C-8434 12 4C-9688 17⁄64 in 8T-27305⁄16 in-24 x .469 in 4C-8435 12 4C-9689 21⁄64 in 8T-27333⁄8 in-24 x .562 in 4C-8436 12 4C-9690 25⁄64 in 8T-27367⁄16 in-20 x .656 in 4C-8437 6 4C-9691 29⁄64 in 8T-27391⁄2 in-20 x .750 in 4C-8438 6 4C-9692 33⁄64 in 8T-2742


Metal Cutting Thread InsertsShop Supplies

02a.qxp 10/5/06 1:26 PM Page 37

Inch Coarse Thread Repair Kits• Kits include insert, tap, installation tool, tang break-off tool, and drill• Tang break-off tool included in 1⁄4-20 through 1/2-13 only• Insert package contains inserts only

Kit Contents and Replacement Part Numbers

InstallationThread Kit Inserts Tap Tool Insert Pkg. Insert Drill DrillSize and Length Part No. per Kit Part No. Part No. Part No. Qty. Size Part No.1⁄4-20 x .3751 4C-8368 24 4C-9681 8T-2692 4C-8419 12 17⁄64 1U-56345⁄16-18 x .4691 4C-8369 24 4C-9682 8T-2695 4C-8420 12 21⁄64 1U-56383⁄8-16 x .5621 4C-8370 12 4C-9683 8T-2698 4C-8421 12 25⁄64 1U-56427⁄16-14 x .6561 4C-8371 12 4C-9684 8T-2703 4C-8422 6 29⁄64 1U-56461⁄2-13 x .7501 4C-8372 12 4C-9685 8T-2706 4C-8423 6 17⁄32 1U-56829⁄16-12 x .844 4C-8373 6 4C-9700 8T-2709 4C-8424 6 19⁄32 1U-56845⁄8-11 x .9381 4C-8374 6 4C-9686 6V-9083 4C-8425 6 21⁄32 1U-56863⁄4-10 x 1.125 4C-8375 4 4C-9725 6V-9081 4C-8426 4 25⁄32 1U-56907⁄8-9 x 1.312 4C-8376 6 4C-9724 8T-2712 4C-8427 1 29⁄32 1U-5694

1-8 x 1.500 4C-8377 6 4C-9723 8T-2715 4C-8428 1 11⁄32 1U-5698

11⁄8-7 x 1.688 4C-8378 5 4C-9722 8T-2718 4C-8429 1 15⁄32 1U-5702

11⁄4-7 x 1.875 4C-8379 4 4C-9721 8T-2721 4C-8430 1 19⁄32 1U-5706

13⁄8-6 x 2.062 4C-8380 4 4C-8468 4C-8485 4C-8431 1 113⁄32 1U-5710

11⁄2-6 x 2.250 4C-8381 4 4C-9720 8T-2724 4C-8432 1 117⁄32 1U-57041 Also included in Master Thread Repair Set — 4C-8364

Inch Fine Thread Repair Kits• Kits include insert, tap, installation tool, tang break-off tool, and drill• Tang break-off tool included in 10-32 through 1/2-20 only• Insert package contains inserts only


InstallationThread Kit Inserts Tap Tool Insert Pkg. Insert Drill DrillSize and Length Part No. per Kit Part No. Part No. Part No. Qty. Size Part No.

10-32 x .2851 4C-8382 24 4C-9687 8T-2727 4C-8433 12 13⁄64 1U-56301⁄4-28 x .3751 4C-8383 24 4C-9688 8T-2730 4C-8434 12 17⁄64 1U-56345⁄16-24 x .4691 4C-8384 24 4C-9689 8T-2733 4C-8435 12 21⁄64 1U-56383⁄8-24 x .5621 4C-8385 12 4C-9690 8T-2736 4C-8436 12 25⁄64 1U-56427⁄16-20 x .6561 4C-8386 12 4C-9691 8T-2739 4C-8437 6 29⁄64 1U-56461⁄2-20 x .7501 4C-8387 12 4C-9692 8T-2742 4C-8438 6 33⁄64 1U-74339⁄16-18 x .844 4C-8388 6 4C-8469 4C-8486 4C-8497 6 37⁄64 1U-74345⁄8-18 x .938 4C-8389 6 4C-9701 8T-2745 4C-8439 6 41⁄64 4C-84803⁄4-16 x 1.125 4C-8390 4 4C-9702 6V-9082 4C-8440 4 49⁄64 4C-84817⁄8-14 x 1.312 4C-8391 6 4C-9703 8T-2748 4C-8441 1 57⁄64 4C-8482

1-14 x 1.500 4C-8392 6 4C-9704 8T-2751 4C-8442 1 11⁄64 4C-8483

1-12 x 1.500 4C-8393 6 4C-8470 4C-8487 4C-8443 1 11⁄64 4C-8483

11⁄8-12 x 1.688 4C-8394 5 4C-9706 8T-2754 4C-8444 1 15⁄32 1U-5702

11⁄4-12 x 1.875 4C-8395 4 4C-9707 8T-2757 4C-8445 1 19⁄32 1U-5706

13⁄8-12 x 2.062 4C-8396 4 4C-8471 4C-8488 4C-8446 1 113⁄32 1U-5710

11⁄2-12 x 2.250 4C-8397 4 4C-9709 8T-2760 4C-8447 1 117⁄32 1U-5704

1 Also included in Master Thread Repair Set — 4C-8365

4C-8366 Metric Master Thread Repair Set

• Contains repairs for the most commonly used thread sizes: M5, M6, M8 and M10 x 1.50

• Set has a drill bit, tap, installation tool, a quantity of inserts for each size, and complete instructions


M5 x 0.8 7.5 4C-8448 12 4C-9727 13⁄64 8T-3121

M6 x 1 9.0 4C-8449 12 4C-9728 1⁄4 8T-2784

M8 x 1.25 12.0 4C-8451 12 4C-8475 21⁄64 8T-2790

M10 x 1.5 15.0 4C-8452 12 4C-9730 13⁄32 8T-2793


Thread Inserts Metal CuttingSh

op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 38

4C-8367 Metric Master Thread Repair Set

• Contains repairs for the most commonly used thread sizes: M5, M6, M8 and M10 x 1.25• Set has a drill bit, tap, installation tool, a quantity of inserts for each size,

and complete instructions


M5 x 0.8 7.5 4C-8448 12 4C-9727 13⁄64 8T-3121

M6 x 1 9.0 4C-8449 12 4C-9728 1⁄4 8T-2784

M8 x 1.25 12.0 4C-8451 12 4C-8475 21⁄64 8T-2790

M10 x 1.25 15.0 4C-8410 12 4C-9715 13⁄32 8T-2763Metric Coarse Thread Repair Kits• Kits include insert, tap, installation tool, tang break-off tool, and drill• Tang break-off tool included in M5 through M12 only



M5 x 0.81 2 7.5 4C-8398 12 4C-9727 8T-3121 4C-8448 12 13⁄64 1U-5630

M6 x 11 2 9.0 4C-8399 12 4C-9728 8T-2784 4C-8449 12 1⁄4 1U-5633

M7 x 1 10.5 4C-8400 12 4C-9705 8T-2787 4C-8450 12 9⁄32 1U-5635

M8 x 1.251 2 12.0 4C-8401 12 4C-8475 8T-2790 4C-8451 12 21⁄64 1U-5638

M10 x 1.51 15.0 4C-8402 12 4C-9730 8T-2793 4C-8452 12 13⁄32 1U-5643

M12 x 1.75 18.0 4C-8403 12 4C-9731 8T-2796 4C-8453 6 15⁄32 1U-5647

M14 x 2 21.0 4C-8404 12 4C-8472 4C-8489 4C-8454 6 37⁄64 1U-7434

M16 x 2 24.0 4C-8405 6 4C-9732 8T-2799 4C-8455 6 21⁄32 1U-5686

M18 x 2.5 27.0 4C-8406 6 4C-8473 4C-8490 4C-8456 6 47⁄64 —

M20 x 2.5 30.0 4C-8407 4 4C-8474 4C-8491 4C-8457 3 13⁄16 1U-5691

1 Also included in 4C-8366 Master Thread Repair Set2 Also included in 4C-8367 Master Thread Repair Set

Metric Fine Thread Repair Kits• Kits include insert, tap, installation tool, tang break-off tool, and drill• Tang break-off tool included in M5 through M12 only



M8 x 1 12.0 4C-8408 12 4C-9729 4C-8492 4C-8458 12 21⁄64 1U-5638

M10 x 1 15.0 4C-8409 12 4C-8476 4C-8493 4C-8459 12 13⁄32 1U-5643

M10 x 1.251 15.0 4C-8410 12 4C-9715 8T-2763 4C-8460 12 13⁄32 1U-5643

M12 x 1.25 18.0 4C-8411 12 4C-9716 8T-2766 4C-8461 6 15⁄32 1U-5647

M12 x 1.5 18.0 4C-8412 12 4C-9717 8T-2769 4C-8462 6 15⁄32 1U-5647

M14 x 1.5 21.0 4C-8413 12 4C-9718 8T-2772 4C-8463 6 9⁄16 1U-5683

M16 x 1.5 24.0 4C-8414 6 4C-9719 8T-2775 4C-8464 6 21⁄32 1U-5686

M18 x 1.5 27.0 4C-8415 6 4C-8477 4C-8494 4C-8465 6 23⁄32 1U-5688

1 Also included in 4C-8367 Master Thread Repair Set

Spark Plug Thread Repair

Preferred method of repair specified by virtually all U.S. and foreign vehicle manufacturers.

• Kits are available in sizes M14, M18, and 7⁄8 inch• Each kit contains a piloted tap (no drilling necessary), an installation tool, and a quantity of inserts• The M14 Kit contains several insert lengths to accommodate all spark plug reaches

ID: C44050T1



InstallationThread Kit Inserts Tap Tool Insert Pkg. InsertSize Reach Part No. per Kit Part No. Part No. Reach Part No. Qty.

14-1.25 mm 3⁄8 in 4C-8416 6 3⁄8 in 9U-5121 67⁄16 in 4C-8416 6 7⁄16 in 9U-5122 61⁄2 in 4C-8416 6 8T-2801 8T-2802 1⁄2 in 9U-5123 63⁄4 in 4C-8416 6 3⁄4 in 9U-5124 6.472 in 4C-8416 6 .472 in 9U-5125 6

18-1.50 mm 1⁄2 in 4C-8417 24 4C-8478 4C-8495 1⁄2 in 4C-8466 67⁄8 in-18 1⁄2 in-5⁄8 in 4C-8418 10 4C-8479 4C-8496 1⁄2 in-5⁄8 in 4C-8467 5

02a.qxp 10/5/06 1:26 PM Page 39

ID: C44245T1

Carded Inserts

• Inserts are carded according to thread size for easy handling and display• Contained in a vial marked with part number, thread size, and length• The length of insert in Inch and Metric packages is 11⁄2 times the diameter of the bolt —

providing sufficient strength in most applications• Spark Plug Inserts are packaged in lengths corresponding to the various spark plug reaches

Inch Coarse

Thread Thread Pkg. InsertSize Length Part No. Qty.1⁄4-20 .375 4C-8419 125⁄16-18 .469 4C-8420 123⁄8-16 .562 4C-8421 127⁄16-14 .656 4C-8422 61⁄2-13 .750 4C-8423 69⁄16-12 .844 4C-8424 65⁄8-11 .938 4C-8425 63⁄4-10 1.125 4C-8426 47⁄8-9 1.312 4C-8427 1

1-8 1.500 4C-8428 1

11⁄8-7 1.688 4C-8429 1

11⁄4-7 1.875 4C-8430 1

13⁄8-6 2.062 4C-8431 1

11⁄2-6 2.250 4C-8432 1

Inch Fine

Thread Thread Pkg. InsertSize Length Part No. Qty.

10-32 .285 4C-8433 121⁄4-28 .375 4C-8434 125⁄16-24 .469 4C-8435 123⁄8-24 .562 4C-8436 127⁄16-20 .656 4C-8437 61⁄2-20 .750 4C-8438 69⁄16-18 .844 4C-8497 65⁄8-18 .938 4C-8439 63⁄4-16 1.125 4C-8440 47⁄8-14 1.312 4C-8441 1

1-14 1.500 4C-8442 1

1-12 1.500 4C-8443 1

11⁄8-12 1.688 4C-8444 1

11⁄4-12 1.875 4C-8445 1

13⁄8-12 2.062 4C-8446 1

11⁄2-12 2.250 4C-8447 1

Metric Coarse


M5 x 0.8 7.5 4C-8448 12

M6 x 1 9.0 4C-8449 12

M7 x 1 10.5 4C-8450 12

M8 x 1.25 12.0 4C-8451 12

M10 x 1.5 15.0 4C-8452 12

M12 x 1.75 18.0 4C-8453 6

M14 x 2 21.0 4C-8454 6

M16 x 2 24.0 4C-8455 6

M18 x 5.25 27.0 4C-8456 6

M20 x 5.25 30.0 4C-8457 3

Metric Fine


M8 x 1 12.0 4C-8458 12

M10 x 1 15.0 4C-8459 12

M10 x 1.25 15.0 4C-8460 12

M12 x 1.25 18.0 4C-8461 6

M12 x 1.5 18.0 4C-8462 6

M14 x 1.5 21.0 4C-8463 6

M16 x 1.5 24.0 4C-8464 6

M18 x 1.5 27.0 4C-8465 6

Spark Plug

18-1.25 mm 1⁄2 in 4C-8466 67⁄8-181⁄2 in 5⁄8 in 4C-8467 5

14-1.25 mm 3⁄8 in 9U-5121 6

14-1.25 mm 7⁄16 in 9U-5122 6

14-1.25 mm 1⁄2 in 9U-5123 6

14-1.25 mm 3⁄4 in 9U-5124 6

14-1.25 mm .472 in 9U-5125 6



op S

uppl

ies

Inserts for Specific Engine Applications

Engine (1) (2) (3) (4) (5) (6) (7) (8)Bore Size Drill Thread Tap Drill Pre- Sleevemm (inch) Size Size Tap Pilot Guide Guide Winder Assembly Insert Nib

95.29 (3.75) 1.0 in 8F-5576 4H-0119 1 8F-5574 8F-5567 9F-7146 9F-7143 8F-5573 9F-7145

101.60 (4.00) 1.0 in 8F-5576 4H-0119 1 8F-5564 8F-5567 9F-7146 9F-7143 8F-5573 9F-7145

107.95 (4.25) 11⁄8 in 8F-5577 4H-0119 1 8F-5575 8F-5568 9F-7148 9F-7143 8F-5574 9F-7147

114.30 (4.50) 11⁄8 in 8F-5577 4H-0119 1 8F-5565 8F-5568 9F-7148 9F-7143 8F-5574 9F-7147

101.60 (4.00) 51⁄64 in 3⁄4 -12 8M-8290 9M-1513 9M-1512 8M-8289 9F-7143 8M-8292 8M-8291

114.30 (4.50) 51⁄74 in 3⁄4 -12 8M-8290 9M-1512 8M-8289 9F-7143 8M-8292 8M-8291 8M-8291

114.30 (4.50) 29⁄32 in 7⁄8 -12 9M-6595 8S-6027 8S-6026 9M-6594 9F-7143 9M-6593 9M-6596

114.30 (4.50) 29⁄32 in 9M-6595 8S-6029 8S-6028 8S-6033 8S-6034 8S-6400 8S-6032

120.65 (4.75) 29⁄83 in 9M-6595 8S-6029 8S-6028 8S-6033 8S-6034 8S-6400 8S-6032V8

120.65 (4.75 29⁄32 in 9M-6595 8S-6029 8S-6028 8S-6033 8S-6034 8S-6400 8S-60322-Valve

130.75 (5.12) 11⁄8 in 8F-5577 5H-8148 8F-5565 8F-5568 9F-7148 9F-7143 5H-8146 5H-8147

130.75 (5.12) 1.0 in 8F-5576 4H-0119 1 8F-5564 8F-5567 9F-7146 9F-7143 8F-5573 9F-7145Series F

137.31 (5.40) 29⁄32 in 7⁄8 -12 9M-6595 9M-6591 9M-6592 9M-6594 9F-7143 9M-6593 9M-6595D343, 169390deltaV8

137.31 (5.40) 29⁄32 in 7⁄8 -12 9M-6595 5P-2417 5P-2418 9M-6594 9F-7143 8S-6400 9M-65963400 Series

137.31 (5.40) 29⁄32 in 7⁄8 -12 9M-6595 7S-8739 7S-8740 9M-6594 9F-7143 9M-6593 9M-659660deltaV8, V12, V16

146.05 (5.75) 11⁄4 in 11⁄4 -12 8F-5578 8F-5566 8F-5569 9F-7150 9F-7143 8F-5575 9F-7149

146.05 (5.75) 11⁄8 in 11⁄8 -12 8F-5577 1P-3571 8F-5565 8F-5568 9F-7148 9F-7143 5H-8146 5H-8147

158.75 (6.25) 1.0 1 -12 8F-5576 8S-6031 8S-6030 9F-7146 9F-7143 8S-6402 9F-7145

1 4H-0119 Pilot is required to locate drill guide and tap guide in later cylinder heads using the larger retainers.

Special Length Inserts

Thread Insert Tap InstallationSize and Length Part No. Part No. Tool Part No.5⁄8-11 x 1.250 6V-9076 4C-9686 6V-90833⁄4-16 x 1.500 6V-9074 4C-9702 6V-9082

M8-1.25 x 16 mm 9U-5177 4C-8475 8T-2790

M16-2 x 32 mm 9U-5604 4C-9732 8T-2799

02a.qxp 10/5/06 1:26 PM Page 40

ID: C44143T1

Easy Installation/Four Simple Steps1. Drill out old threads using specified drill size.

2. Tap new threads using specified tap size.

3. Screw in insert until slightly below surface. Lock-tabs act as depth stop.

4. Drive lock-tabs into the surrounding base material with several light tapson installation tool to securely lock the insert against rotation.

English Thread Insert Removal Data

Internal Drill Drill Drill Thread Size Size Depth Part No.

10-24 9⁄32 in 3.2 mm (.12 in) 1U-560310-321⁄4-20 11⁄32 in 4.8 mm (.19 in) 1U-56071⁄4-285⁄16-18 13⁄32 in 4.8 mm (.19 in) 1U-56115⁄16-243⁄8-16 15⁄32 in 4.8 mm (.19 in) 1U-56153⁄8-247⁄16-14 17⁄32 in 4.8 mm (.19 in) 1U-56827⁄16-201⁄2-13 21⁄32 in 4.8 mm (.19 in) 1U-56861⁄2-209⁄16-12 21⁄32 in 4.8 mm (.19 in) 1U-56869⁄16-185⁄8-11 25⁄32 in 4.8 mm (.19 in) 1U-56905⁄8-183⁄4-10 31⁄32 in 7.9 mm (.31 in) 1U-56963⁄4-167⁄8-9 1 3⁄32 in 7.9 mm (.31 in) 1U-57007⁄8-14

1-8 1 7⁄32 in 7.9 mm (.31 in) —1-14

1 1⁄8-7 1 11⁄32 in 7.9 mm (.31 in) —1 1⁄8-12

1 1⁄4-7 1 15⁄32 in 7.9 mm (.31 in) —1 1⁄4-12

1 1⁄2-6 1 23⁄32 in 7.9 mm (.31 in) —1 1⁄2-12

Metric Thread Insert Removal Data

Internal Drill Drill Drill Thread Size Size Depth Part No.

M6 7.50 mm 4.3 mm (.17 in) 1U-8160

M8 9.50 mm 4.3 mm (.17 in) 1U-8167

M10 11.50 mm 4.3 mm (.17 in) 1U-8171

M12 13.50 mm 4.3 mm (.17 in) 1U-8171

M16 17.75 mm 6.3 mm (.25 in) —

M20 25.75 mm 6.3 mm (.25 in) —

M24 28.75 mm 6.3 mm (.25 in) —



Keenserts Thread Inserts

Strong, permanent, metal threads — coarse or fineMaster kits contain a selection of various size inserts, drivers, and complete instructions in one package. These master kits provide convenient storage and easy access to inserts and driver tools.

Insert kits contain a particular size of thread insert, the correct driver, and instructions.

Refill kits contain only one size of thread insert and instructions (no driver tool).

• Installed with standard drills and taps• No pre-winder tool required• Impossible to cross thread while installing• No tang to break-off• Positive mechanical lock against rotation• May be used in virtually any material including aluminum, magnesium, cast iron,

cold rolled steel, or plastic• Provides high strength, reliability, and maximum pullout strength• Easy to remove• No special skills required—installation procedures can be learned in minutes

Typical Applications• Buses• Trucks• Heavy equipment• Marine equipment• Machinery• Tooling• Power tools• Recreational vehicles• Small engines

English and Metric Thread Insert Master Kits (Keensert)

• Solid key-locking inserts are used for repairing damaged threads• Not affected by vibration or torsion providing added strength and reliabilty• All kits are contained in rugged metal boxes with individual compartments for each size of insert and driver• Each kit contains different-sized inserts and drivers ranging from M6 to M24 or 1⁄4 inch to 11⁄2 inch threaded size

ReferenceSpecial Instruction SEHS8792, Using Caterpillar Replacement Threads

ID: A69887-1T1

Part No. Size Range

9S-3500 (UNF) #10 through 11⁄2 inch, fine thread

9S-3700 (UNC) #10 through 1 1⁄2 inch, coarse thread

247-9662 (Metric) M6 through M12

247-9663 (Metric) M8 through M24

02a.qxp 10/5/06 1:26 PM Page 41

ID: A71409T1

ID: A71410T1

Insert Kits and Replacement Kits

Insert Kits• Used to repair threads of one specific size• These insert kits include inserts of one size, a driver,

and installation instructions• Insert kits come in both English and metric threads

ReferenceSpecial Instruction SEHS8792; Using Caterpillar Replacement Thread Inserts

Replacement Kits• Replacement kits provide inserts for restocking master kits

such as 9S-3500, 9S-3700, 247-9662, and 247-9663• Kits include one size insert and installation instructions• Replacements kits come in both English and metric threads

Internal Insert Kit No. of Replacement No. of Insert Data Installation DataThread Part Inserts Kit Inserts External Tap Drill Drill C’sink Tap TapNo. No. Per Kit Part No. Per Kit Thread Length Dia. Part No. Dia. 1 Size Part No.

10-24 9S-3510 15 9S-3674 45 3/8-16 7.8 mm (.31 in) Q 1U-5606 9.6 mm (.38 in) 3/8 -16 1P-3025

10-32 9S-3509 15 9S-3673 45 3/8-16 7.8 mm (.31 in) Q 1U-5606 9.6 mm (.38 in) 3/8 -16 1P-30251/4-20 9U-5053 13 9U-5054 40 7/16-14 9.4 mm (.37 in) X 1U-5610 11 mm (.44 in) 7/16-14 1P-30271/4-28 9U-5055 13 9U-5056 40 7/16-14 9.4 mm (.37 in) X 1U-5610 11 mm (.44 in) 7/16-14 1P-30275/16-18 9U-5057 8 9U-5058 25 1/2-13 11 mm (.43 in) 27/64 1U-5614 13 mm (.51 in) 1/2-13 1P-30295/16-24 9U-5059 8 9U-5060 25 1/2-13 11 mm (.43 in) 27/64 1U-5614 13 mm (.51 in) 1/2-13 1P-30293/8-16 9S-3618 6 9S-3651 20 9/16-12 13 mm (.50 in) 33/64 1U-7433 14 mm (.57 in) 9/16-12 1P-30313/8-24 9S-3515 6 9S-3641 20 9/16-12 13 mm (.50 in) 33/64 1U-7433 14 mm (.57 in) 9/16-12 1P-30317/16-14 9S-3620 6 9S-3652 18 5/8-11 16 mm (.62 in) 37/64 1U-7434 16 mm (.63 in) 5/8-11 1P-30337/16-20 9S-3619 6 9S-3642 18 5/8-11 16 mm (.62 in) 37/64 1U-7434 16 mm (.63 in) 5/8-11 1P-30331/2-13 9S-3622 5 9S-3653 15 3/4-16 16 mm (.62 in) 45/64 1U-7435 19 mm (.76 in) 3/4-16 1P-30361/2-20 9S-3621 5 9S-3643 15 3/4-16 16 mm (.62 in) 45/64 1U-7435 19 mm (.76 in) 3/4-16 1P-30369/16-12 9S-3624 3 9S-3654 10 3/4-16 20 mm (.81 in) 45/64 1U-7435 19 mm (.76 in) 3/4-16 1P-30369/16-18 9S-3623 3 9S-3644 10 3/4-16 20 mm (.81 in) 45/64 1U-7435 19 mm (.76 in) 3/4-16 1P-30365/8-11 9S-3626 2 9S-3655 9 7/8-14 22 mm (.87 in) 53/64 1U-7436 22 mm (.88 in) 7/8-14 1P-30385/8-18 9S-3625 2 9S-3645 9 7/8-14 22 mm (.87 in) 53/64 1U-7436 22 mm (.88 in) 7/8-14 1P-30383/4-10 9S-3628 2 9S-3656 6 11/8-12 28 mm (1.12 in) 11/16 1U-5699 29 mm (1.14 in) 11/8-12 1P-30413/4-16 9S-3627 2 9S-3646 6 11/8-12 28 mm (1.12 in) 11/16 1U-5699 29 mm (1.14 in) 11/8-12 1P-30417/8-9 9S-3630 2 9S-3657 5 11/4-12 32 mm (1.25 in) 13/16 1U-5703 32 mm (1.27 in) 11/4-12 1P-30427/8-14 9S-3629 2 9S-3647 5 11/4-12 32 mm (1.25 in) 13/16 1U-5703 32 mm (1.27 in) 11/4-12 1P-3042

1-8 9S-3632 2 9S-3658 4 13/8-12 35 mm (1.37 in) 15/16 1U-5707 35 mm (1.39 in) 13/8-12 1P-3043

1-14 9S-3631 2 9S-3648 4 13/8-12 35 mm (1.37 in) 15/16 1U-5707 35 mm (1.39 in) 13/8-12 1P-3043

11/8-7 9S-3633 2 9S-3675 3 11/2-12 41 mm (1.62 in) 17/16 1U-5711 39 mm (1.52 in) 11/2-12 1P-3044

11/8-12 9S-3634 2 9S-3676 3 11/2-12 41 mm (1.62 in) 17/16 1U-5711 39 mm (1.52 in) 11/2-12 1P-3044

11/4-7 9S-3635 2 9S-3677 2 15/8-12 46 mm (1.81 in) 19/16 1U-7437 41 mm (1.62 in) 15/8-12 —

11/4-12 9S-3636 2 9S-3678 2 15/8-12 46 mm (1.81 in) 19/16 1U-7437 41 mm (1.62 in) 15/8-12 —

11/2-6 9S-3637 2 9S-3679 2 17/8-12 51 mm (2.00 in) 113/16 1U-7438 48 mm (1.89 in) 17/8-12 —

11/2-12 9S-3638 2 9S-3680 2 17/8-12 51 mm (2.00 in) 113/16 1U-7438 48 mm (1.89 in) 17/8-12 —

M6-1 246-7511 10 246-7520 25 M10-1.25 10 mm (.39 in) 8.8 mm 1U-8165 10.25 mm (.40 in) M10-1.25 8T-3086

M8-1.25 246-7513 10 246-7521 25 M12-1.25 12 mm (.47 in) 10.8 mm 1U-8169 12.25 mm (.48 in) M12-1.25 8T-3089




M16-2 246-7517 3 246-7525 5 M22-1.5 22 mm (.87 in) 20.5 mm — 22.25 mm (.87 in) M22-1.5 156-8166

M20-2.5 246-7518 3 246-7526 5 M30-2 30 mm (1.18 in) 28 mm 1U-8194 30.25 mm (1.19 in) M30-2 —

M24-3 246-7519 2 246-7528 5 M33-2 33 mm (1.30 in) 31 mm — 33.25 mm (1.31 in) M33-2 —1 Use a standard coutersink tool with an angle from 82 to 100 degrees. The diameter listed in the chart is the measuremt at the top of the counterbore. The tolerance for

this diameter is –0 mm (.0 in) + 0.25 mm (.010 in).



op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 42

Installation Tools and Thread InsertsModel: 141-7250—416C, 426C, 428C, 436C, and 438C Backhoe Loader; 178-7635—E529, E523, E530, E524, E531, E525, and various other models; 179-3571—various

141-7250 Installation Tool• Used to install M6 x 1 threaded insert• Used with standard hand tools to make repair• Allows convenient field repair of stripped or damaged threads• Compact design allows installation of insert in confined areas• Used in applications such as repair of threaded M6 x 1.0 mounting holes inside

cab of C-Series Backhoe Loaders

140-9921 Threaded Insert• Used to repair stripped threads• Used in material thickness of 0.7 to 3.0 mm (.028 to .118 in)

178-7635 Installation Tool• Used to install 8-32 threaded insert• Used with standard hand tools to make repair• Allows convenient field repair of stripped or damaged threads• Compact design allows installation of insert in confined areas

176-1691 Fastener• Used to repair stripped threads• Used in material thickness of .76 mm to 4.75 mm (.030 to .187 in)

179-3571 Installation Tool• Used to install all 1/4-20 threaded insert• Used with standard hand tools to make repair• Allows convenient field repair of stripped or damaged threads• Compact design allows installation of inserts in confined area

178-1628 Fastener• Used to repair stripped threads• Used in material thickness of .76 mm to 4.75 mm (.030 to .187 in )

ReferenceNEHS0677 Tool Operating Manual containing installation instructions

Installation Tools

Part No. Hex Length Bolt Thread

141-7250 9⁄16 inch 12.7 mm (.50 in) M6 x 1.0

178-7635 9⁄16 inch 10.2 mm (.400 in) 8-32

179-3571 9⁄16 inch 13.3 mm (.525 in) 1⁄4-20

Threaded Inserts

Part No. Body Diameter Flange Diameter Length Thread

140-9921 9.5 mm (.374 in) 10 mm (.393 in) 14 mm (.551 in) M6 x 1.0

176-1691 6.34 mm (.250 in) 6.83 mm (.269 in) 9.4 mm (.370 in) 8-32

178-1628 9.51 mm (.375 in) 10.2 mm (.400 in) 13.1 mm (.515 in) 1⁄4-20 ID: C78509T1

Installation Tool

Fastener



Installation Tools and Thread InsertsSMCS Code: 7564Model: Backhoe Loaders

• Used to install M4 and M6 threaded inserts• Used with standard hand tools• Allows convenient field repair of stripped or damaged threads• Compact design allows installation of insert in confined areas

ID: C80348T1

206-4499206-4496

205-7048205-7047

Part No. Description Hex Length Bolt Thread

206-4496 Installation Tool (M4) 9⁄16 inch 12.7 mm (.50 in) M4 x 0.7

206-4499 Installation Tool (M6) 9⁄16 inch 12.7 mm (.50 in) M6 x 1.0

Part No. Description Body Diameter Flange Diameter Length Thread Pilot Hole Diameter Grip Range

206-7047 Threaded Insert (M4) 6.73 mm (.265 in) 7.87 mm (.310 in) 10.67 mm (.420 in) M4 x 0.7 6.75 mm (.266 in) 0.50 to 2.00 mm (.020 to .079 in)

206-7048 Threaded Insert (M6) 9.91 mm (.390 in) 11.56 mm (.455 in) 14.73 mm (.580 in) M6 x 1.0 10.00 mm (.294 in) 0.70 to 4.20 mm (.028 to .165 in)

02a.qxp 10/5/06 1:26 PM Page 43

Individual Extractors

• Useful in maintenance departments, machine shops, garages, workshops, etc., to remove broken screws, bolts or other threaded parts

• First, drill a hole into the broken part. Insert the extractor. By twisting to the left, the extractor will grip into the wall of the hole and the broken part can be backed out without damaging threads.

ID: C79489T1 ID: C79434T1

Extractor Cat Drill size Used to remove Used to removeSize Part No. to use Screws and Bolts Pipe

Left Hand Spiral Tapered Flutes

1 4C-3364 5⁄64 in 2.5 mm - 6.0 mm (3⁄16 in - 1⁄4 in) —

2 4C-3365 7⁄64 in 6.0 mm - 8.0 mm (1⁄4 in - 5⁄16 in) —

3 4C-3366 5⁄32 in 8.0 mm - 12.0 mm (5⁄16 in - 7⁄16 in) —

4 4C-3367 1⁄4 in 12.0 mm - 14.0 mm (7⁄16 in - 9⁄16 in) —

5 4C-3368 17⁄64 in 14.0 mm - 20.0 mm (9⁄16 in - 3⁄4 in) 1⁄8 in

6 4C-3369 13⁄32 in 20.0 mm - 24.0 mm (3⁄4 in - 1 in) —

7 4C-3370 17⁄32 in 24.0 mm - 35.0 mm (1 in - 13⁄8 in) —

8 4C-3371 13⁄16 in 35.0 mm - 44.0 mm (13⁄8 in - 13⁄4 in) 3⁄4 in

9 4C-3372 11⁄16 in 44.0 mm - 54.0 mm (13⁄4 in - 21⁄8 in) 1 in

10 4C-3373 15⁄16 in 54.0 mm - 63.0 mm (21⁄8 in - 21⁄2 in) 11⁄4 in

Straight Tapered Flutes

1 4C-3374 9⁄64 in 2.5 mm - 8.0 mm (1⁄4 in - 5⁄16 in) —

2 4C-3375 3⁄16 in 9.0 mm - 10.0 mm (3⁄8 in) —

3 4C-3376 15⁄64 in 12.0 mm (7⁄16 in) 1⁄8 in

4 4C-3377 5⁄16 in 13.0 mm - 14.0 mm (1⁄2 in - 9⁄16 in) 1⁄4 in

5 4C-3378 3⁄8 in 15.0 mm - 16 mm (5⁄8 in) 3⁄8 in

6 4C-3379 15⁄32 in 17.0 mm - 19.0 mm (3⁄4 in) 1⁄2 in

7 4C-3380 9⁄16 in 22.0 mm (7⁄8 in) —



op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 44

Extractor Sets

• For removing broken screws and bolts (eliminates redrilling and retapping for a larger screw)

4C-3383 Extractor Set, Straight Tapered

To remove bolts,Part No. screws and pipes:

4C-3374 3⁄16 in to 5⁄16 in

4C-3375 3⁄8 in

4C-3376 7⁄16 in and 1⁄8 in Pipe

4C-3377 1⁄2 in to 9⁄16 in and 1⁄4 in Pipe

4C-3378 5⁄8 in and 3⁄8 in Pipe


ID: C44009T1

4C-3382 Extractor Set, Left Hand Spiral


4C-3364 3⁄32 in to 5⁄32 in

4C-3365 5⁄32 in to 7⁄32 in

4C-3366 7⁄32 in to 9⁄32 in






4C-3372 13⁄8 in to 2 in and 1 in Pipe

4C-3381 Extractor Set, Left Hand Spiral


4C-3364 3⁄32 in to 5⁄32 in

4C-3365 5⁄32 in to 7⁄32 in

4C-3366 7⁄32 in to 9⁄32 in




4C-5530 Extractor Set, Straight Tapered


4C-3374 3⁄16 in to 5⁄16 in

4C-3375 3⁄8 in

4C-3376 7⁄16 in and 1⁄8 in Pipe



ID: C44010T1

4C-3384 Extractor Set, Left Hand Spiral, in vinyl pouch


4C-3364 3⁄32 in to 5⁄32 in

4C-3365 5⁄32 in to 7⁄32 in

4C-3366 7⁄32 in to 9⁄32 in



1B-9925 Left Hand Spiral Screw Extractor

• Originally used for the removal of burner tubes in the D70, D65 Tractors and D9900 Power Units• Used to remove broken screws and bolts• Eliminates redrilling and retapping for larger screw

ID: C54443T1

Turn 1⁄2 in

Spiral length 13⁄4 in

Taper per foot 13⁄8 in

Square drive 5⁄8 in

Overall length 101⁄2 in



02a.qxp 10/5/06 1:26 PM Page 45

ID: C41288T1

282-2108 Extractor Set, 10 pieceSMCS Code: 0671Model: All

• Standard extractors for righthand pipe and studs• Four-point grip assures strong bite• Works with shallow grip which lessens expansion

and jamming• Pulls rather than reams• Releases from bite instantly after job completed• Designed for strength, durability, and easy handling• Rust resistant, black oxide finish• Complete set of only 10 extractors fits every size

and class of pipe from 1⁄8 to 2 inch• Also fits every stud and screw from 3⁄8 to 31⁄2 inch• Comes in sturdy plastic case• Can also be ordered individually

ID: D01810T1

For For Broken StudExtractor Broken Pipe or Screw

Part No. Number (inch) (inch)

282-2109 1 1⁄8 3⁄8282-2110 2 1⁄4 1⁄2282-2111 3 3⁄8 5⁄8 or 3⁄4282-2112 4 1⁄2 —

282-2113 10 — 7⁄8 or 1

282-2115 5 3⁄4 11⁄8 or 11⁄4282-2116 6 1 11⁄2 or 13⁄4282-2117 7 11⁄4 2282-2118 8 11⁄2 21⁄4 or 21⁄2282-2119 9 2 3 or 31⁄2

Left Hand Drills

• Index set not available• 135° split point• Self-centering capability• M-7 steel• Excellent for removing broken

studs and fasteners

Part No. Size

4C-3335 1⁄16 in

4C-3336 5⁄64 in

4C-3337 3⁄32 in

4C-3338 7⁄64 in

4C-3339 1⁄8 in

4C-3340 9⁄64 in

4C-3341 5⁄32 in

4C-3342 11⁄64 in

4C-3343 3⁄16 in

4C-3344 13⁄64 in

Part No. Size

4C-3345 7⁄32 in

4C-3346 13⁄64 in

4C-3347 1⁄4 in

4C-3348 17⁄64 in

4C-3349 9⁄32 in

4C-3350 19⁄64 in

4C-3351 5⁄16 in

4C-3352 21⁄64 in

4C-3353 11⁄32 in

4C-3354 23⁄64 in

Part No. Size

4C-3355 3⁄8 in

4C-3356 25⁄64 in

4C-3357 13⁄32 in

4C-3358 27⁄64 in

4C-3359 7⁄16 in

4C-3360 28⁄64 in

4C-3361 15⁄32 in

4C-3362 31⁄64 in

4C-3363 1⁄2 in

2P-5535 Stud Remover Set

• Extractors are not threaded and thus will accommodate studs with either coarse or fine threads• Saves time when removing a number of studs and eliminates thread damage

ReferenceGMG02078 Special Instruction

ID: B80755T1


1 2P-5527 Extractor, 3⁄4 in

2 2P-5528 Extractor, 7⁄8 in

3 2P-5529 Extractor, 1 in

4 2P-5497 Body

5 2P-5538 Bolt

6 2P-5537 Washer



op S

uppl

ies

02a.qxp 10/5/06 1:26 PM Page 46

Stud Removers

• Replaces 5P-0250 Group• Handles larger studs

ID: C34440T1ID: C44278T1


1U-8582 Main Housing

1U-8583 Collet 11⁄2-6-2B

1U-8584 Collet 11⁄2-12-2B

1U-9994 Collet 13⁄8-6-2B

1U-9995 Collet 13⁄8-12-2B

1U-9996 Collet 11⁄4-7-2B

1U-9998 Collet 11⁄8-7-2B

8S-1378 Stud Remover and Resetter Tool Set, 1⁄4 through 5⁄8 in

ID: C07882T1


8S-1365 Collet 1⁄4 in - 20

8S-1366 Collet 1⁄4 in - 28

8S-1367 Collet 5⁄16 in - 18

8S-1368 Collet 5⁄16 in - 24

8S-1369 Collet 3⁄8 in - 16

8S-1370 Collet 3⁄8 in - 24

8S-1371 Collet 7⁄16 in - 14

8S-1372 Collet 7⁄16 in - 20

8S-1373 Collet 1⁄2 in - 13

8S-1375 Collet 9⁄16 in - 12

8S-1376 Collet 9⁄16 in - 18

8S-1346 Collet 5⁄8 in - 11

8S-1377 Collet 5⁄8 in - 18

8S-1364 Box

Not Shown

8S-1374 Collet 1⁄2 in - 20

8S-1347 Housing

Metric Stud InstallersEssential Tool

• Used to quickly and easily install metric studs (not for stud removal)• Can be used with standard wrench or impact wrench• Reduces possible damage to threads• Designed to easily release from stud after installation• Ensures reliable bolted joint (reduces chance of stud backout)

ID: C80194T1

Part No. Size

204-7932 M16 x 2.0

204-7933 M20 x 2.5

204-7934 M24 x 3.0

204-7935 M30 x 3.5

204-7936 M36 x 3.0



02a.qxp 10/5/06 1:26 PM Page 47

Cutting Torch Equipment

8T-7792 Mini Cutting Torch

• Will cut cast iron, stainless steel, high alumina refractory, and slag• Can be used indoors, because the noise and smoke levels are very low• Faster and less expensive than carbon arc and requires oxygen only• Durable, comfortable, and less fatiguing to use• Large squeeze trigger-type handle control delivers oxygen precisely.• Excellent tool for gouging hard facing. Unlike carbon arc,

the rods contain no carbon, thus reducing the grinding requirement.

Rod Sizes Used by Mini Cutting Torch

General purpose rods for removing small bolts and pins by piercing4.76 mm x 55.24 cm (3⁄16 in x 213⁄4 in)6.35 mm x 55.24 cm (1⁄4 in x 213⁄4 in)

Rods for piercing track pins, washing away welds, and gouging hard facing9.52 mm x 46.67 cm (3⁄8 in x 183⁄8 in)

Cut off and gouging rod for piercing longer pins and rough cutting9.52 mm x 91.44 cm (3⁄8 in x 36 in)

ID: C10294T1Item Part No. Description

Included with Mini Cutting Torch

1 8T-7792 Mini Cutting Torch

2 8T-9110 Washer

3 8T-7795 Collet, 4.76 mm (3⁄8 in)

4 8T-7794 Collet, 6.35 mm (1⁄4 in)

Not shown 8T-9202 Collet, 4.76 mm (3⁄16 in)

Not shown 8T-7793 Striker Plate

Not shown 8T-9287 Washer

Purchase separately

5 8T-7697 Rod, 9.52 mm x 914.4 mm (3⁄8 in x 36 in)

6 8T-7696 Rod, 6.35 mm x 55.24 cm (1⁄4 in x 213⁄4 in)

7 8T-7698 Rod, 4.76 mm x 45.72 cm (3⁄8 in x 18 in)

Not shown 8T-9201 Rod, 4.76 mm x 55.24 cm (3⁄16 in x 213⁄4 in)

Not shown 8T-7699 Igniter

Not shown 9U-5614 Shield

Not shown 9U-5615 Collet Nut-Brass

Not shown Form SEHS8923


Cutting Torch Equipment / Miscellaneous Metal CuttingSh

op S

uppl

ies

ID: D00290T1

Miscellaneous

9A-1593 Surface Texture Replica (Comparison)

• Used as a reference tool for metal surface reconditioning during reuse and salvage of major components

• Provides user with a physical representation of surface finish specifications that are called out in Reuse and Salvage Guidelines

• Provides 12 examples of F, H, K, and N surface textures for cast iron and steel

ReferencesSEBF8271, Guideline for Reusable Parts

02a.qxp 10/5/06 1:26 PM Page 48

Caps and Plugs

Caps and Plugs

• Used to help protect against damage, dirt and moisture contamination, and corrosion during shipping and storage

ID: C79465T1

ORFS Plugs

A A LThread ThreadDash Size Length

Part No. Size (in - TPI) (in) (mm)

6V-9507 -4 9⁄16 - 18 0.67 17

6V-9508 -6 11⁄16 - 16 0.75 19

6V-9509 -8 13⁄16 - 16 0.87 22

6V-9510 -10 1 - 14 1.02 26

6V-9511 -12 13⁄16 - 12 1.06 27

6V-9512 -16 17⁄16 - 12 1.10 28

6V-9513 -20 111⁄16 - 12 1.10 28

231-3942 -24 2-12 1.10 28

ID: C79732T1

JIC 37° Plugs

A A LThread ThreadDash Size Length

Part No. Size (in - TPI) (in) (mm)

9S-5518 -4 7⁄16 - 20 0.79 20

5P-4996 -5 1⁄2 - 20 0.79 20

9S-8927 -6 9⁄16 - 18 0.83 21

5P-2909 -8 3⁄4 - 16 0.94 24

2P-9697 -10 7⁄8 - 14 1.10 28

9S-8895 -12 11⁄16 - 12 1.26 32

5P-4299 -14 13⁄16 - 12 1.30 33

5P-2299 -16 15⁄16 - 12 1.34 34

ID: C79777T1

Straight Thread O-Ring — Hex Head Plugs

ThreadSize O-ring

Part No. (in - TPI) Seal

9S-4180 5⁄16 - 24 4J-7533

1N-5999 3⁄8 - 24 7J-0204

9S-4182 7⁄16 - 20 3J-7354

3K-8460 1⁄2 - 20 1J-9671

9S-4191 9⁄16 - 18 3J-1907

9S-4185 3⁄4 - 16 3K-0360

9S-4190 7⁄8 - 14 2M-9780

9S-4183 11⁄16 - 12 3D-2824

9S-4188 13⁄16 - 12 4K-1388

9S-4181 15⁄16 - 12 7M-8485

9S-6130 15⁄8 - 12 2S-4078

1N-5998 17⁄8 - 12 6K-6307

9S-7583 21⁄2 - 12 030-4606

ID: C79800T1

Straight Thread O-Ring — Allen Drive Plugs

ThreadSize O-ring

Part No. (in - TPI) Seal

9S-8001 5⁄16 - 24 4J-7533

9S-8007 3⁄8 - 24 7J-0204

9S-8002 7⁄16 - 20 3J-7354

9S-8003 1⁄2 - 20 1J-9671

9S-8004 9⁄16 - 18 3J-1907

9S-8005 3⁄4 - 16 3K-0360

9S-8006 7⁄8 - 14 2M-9780

9S-8008 11⁄16 - 12 3D-2824

9S-8009 13⁄16 - 12 4K-1388

9S-9334 15⁄16 - 12 7M-8485

9S-8010 15⁄8 - 12 2S-4078

5P-7684 17⁄8 - 12 6K-6307

ID: C79487T1

Pipe — Hex Head Plugs

ThreadSize

Part No. (in - TPI)

2S-7905 1⁄16 - 27

5M-6214 1⁄8 - 27

5M-6213 1⁄4 - 18

3J-5390 3⁄8 - 18

4J-4382 1⁄2 - 14

3M-7045 3⁄4 - 14

090-9019 1 - 111⁄2


Caps and PlugsShop Supplies

ID: C79607T1

Pipe — Square Head Plugs

ThreadSize

Part No. (in - TPI)

2B-7408 1⁄8 - 27

2B-7409 1⁄4 - 18

2B-7457 3⁄8 - 18

5B-9169 1⁄2 - 14

5P-3320 3⁄4 - 14

7L-2505 1 - 111⁄2068-0710 11⁄4 - 111⁄24B-8586 2 - 111⁄2

02b.qxp 10/5/06 1:26 PM Page 49

ID: C79770T1

Pipe — Square Drive Plugs

ThreadSize

Part No. (in - TPI)

7F-9504 1⁄4 - 18

4B-4845 3⁄8 - 18

2B-0858 1⁄2 - 14

1B-5174 3⁄4 - 14

3B-0551 1 - 111⁄21B-5170 11⁄4 - 111⁄27B-9665 11⁄2 - 111⁄26V-1897 2 - 111⁄26V-3280 21⁄2 - 8

6V-3257 31⁄2 - 8

ID: C79466T1

Pipe — Allen Drive Plugs

ThreadSize

Part No. (in - TPI)

4D-0514 1⁄16 - 27

9F-2247 1⁄8 - 27

7H-3171 1⁄4 - 18

7M-7410 3⁄8 - 18

3L-1850 1⁄2 - 14

6L-8355 3⁄4 - 14

2R-5657 1 - 111⁄2

ID: C79799T1

JIS-BSPP Shipping Plugs

JIS-BSPPThreadSize

Part No. (in - TPI)

093-1321 1⁄4 - 19

096-6073 3⁄8 - 19

093-1322 1⁄2 - 14

093-1323 3⁄4 - 14

096-3829 1 - 11

ID: C79608T1

Metric Plugs

A Light Heavy LMetric Duty DutyThread Tube TubeSize O.D. O.D. Length

Part No. (dia x pitch) (mm) (mm) (in) (mm)

105-5211 M12 x 1.5 6 1 0.65 17

2Y-6462 M14 x 1.5 8 6 0.63 16

9T-6322 M14 x 1.5 8 6 0.87 22

2Y-5841 M16 x 1.5 10 8 0.63 16

2Y-6461 M16 x 1.5 10 8 0.71 18

8C-4424 M22 x 1.5 14 14 1.06 271 Size not available.

ID: C79767T1

SAE Code 61 Flange Port Cover

A AHead FlangeSize Dash

Part No. (in) (mm) Size

5H-4017 1.19 30.2 -8

5H-4018 1.50 38.1 -12

5H-4019 1.75 44.5 -16

5H-4020 2.00 50.8 -20

2J-2668 2.38 60.3 -24

2J-5608 2.81 71.4 -32

ID: C79767T1

Caterpillar Flange Port Cover

A AHead FlangeSize Dash

Part No. (in) (mm) Size

5P-0045 1.25 31.8 -8

5P-0046 1.63 41.3 -12

5P-0047 1.88 47.6 -16

5P-0048 2.12 54.0 -20

5P-0049 2.50 63.5 -24

5P-0050 3.13 79.4 -32


Caps and PlugsSh

op S

uppl

ies

02b.qxp 10/5/06 1:26 PM Page 50

ID: D01665T1

Tapered Dual-Function Caps and Plugs• The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters• Protects against damage, dirt, moisture and corrosion during storage and shipping• Material: Low-Density Polyethylene• Color: Blue• Applicable Spec: NAS 834 (supercedes MIL-C-5501/7, MIL-C-52078)

To assure a proper fit, dimension “E” should be approximately .020 in smaller than the opening diameter of the part to beprotected, or dimension “A” should be approximately .020 in larger than the opening diameter of the part to be protected.

Tapered Dual-Function Caps and Plugs

Use as a plug Use as a capPkg. A B C D E F Supplier

Part No. Qty. (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) Part No.

276-0731 250 0.18 5 0.11 3 0.31 8 0.40 10 0.05 1 0.11 3 1 T-0-X276-0740 250 0.24 6 0.17 4 0.37 10 0.37 10 0.10 3 0.17 4 2 T-1276-0741 250 0.27 7 0.20 5 0.43 11 0.37 10 0.15 4 0.20 5 4 T-1-X276-0742 250 0.30 8 0.24 6 0.46 12 0.37 10 0.17 4 0.24 6 5 T-2276-0743 250 0.33 9 0.26 7 0.46 12 0.37 10 0.20 5 0.27 7 6 T-2-X276-0744 250 0.36 9 0.30 8 0.53 13 0.37 10 0.23 6 0.30 8 7 T-39U-7067 250 0.40 10 0.33 8 0.56 14 0.38 10 0.27 7 0.33 8 8 T-3-X9U-7068 250 0.43 11 0.36 9 0.59 15 0.38 10 0.30 8 0.37 9 9 T-4276-0745 250 0.46 12 0.39 10 0.62 16 0.37 10 0.32 8 0.39 10 10 T-4-X9U-7069 250 0.49 12 0.42 11 0.59 15 0.38 10 0.36 9 0.42 11 11 T-5276-0746 250 0.51 13 0.44 11 0.62 16 0.40 10 0.38 10 0.44 11 12 T-5-X9U-7070 250 0.55 14 0.49 12 0.72 18 0.50 13 0.41 10 0.49 12 13 T-6-5276-0747 250 0.56 14 0.50 13 0.75 19 0.43 11 0.43 11 0.50 13 14 T-6-X9U-7071 250 0.62 16 0.53 13 0.75 19 0.50 13 0.47 12 0.55 14 16 T-7-X9U-7072 250 0.63 16 0.55 14 0.78 20 0.50 13 0.49 12 0.57 14 17 T-8276-0748 250 0.67 17 0.58 15 0.87 22 0.53 13 0.52 13 0.60 15 18 T-8-X276-0749 250 0.69 18 0.61 15 0.84 21 0.50 13 0.54 14 0.63 16 20 T-99U-7073 250 0.73 18 0.64 16 0.88 22 0.50 13 0.58 15 0.67 17 21 T-9-X9U-7074 250 0.75 19 0.67 17 0.88 22 0.63 16 0.62 16 0.69 18 22 T-109U-7075 250 0.79 20 0.69 18 0.94 24 0.63 16 0.63 16 0.72 18 23 T-119U-7076 250 0.85 22 0.75 19 1.03 26 0.63 16 0.69 17 0.79 20 27 T-129U-7077 250 0.91 23 0.80 20 1.09 28 0.75 19 0.74 19 0.85 21 28 T-12-X276-0750 250 0.93 24 0.82 21 1.12 29 0.62 15 0.75 19 0.86 22 29 T-13-A9U-7078 250 0.98 25 0.87 22 1.11 28 0.63 16 0.81 21 0.92 23 31 T-13-X9U-7079 250 1.04 26 0.90 23 1.16 29 0.75 19 0.83 21 0.98 25 35 T-149U-7080 250 1.09 28 0.97 25 1.25 32 0.75 19 0.90 23 1.03 26 40 T-149U-7081 250 1.15 29 1.00 25 1.31 33 0.75 19 0.94 24 1.08 27 41 T-14-X9U-7082 250 1.23 31 1.11 28 1.52 39 0.75 19 1.04 26 1.18 30 42 T-15-X7E-8716 250 1.29 33 1.18 30 1.44 37 0.75 19 1.11 28 1.22 31 44 T-15-S276-0751 250 1.35 34 1.22 31 1.50 38 0.75 19 1.16 29 1.29 33 45 T-169U-7084 250 1.35 34 1.24 31 1.50 38 0.75 19 1.17 30 1.30 33 46 T-16276-0752 250 1.45 40 1.29 33 1.62 41 1.00 25 1.22 31 1.39 35 48 T-17276-0753 250 1.46 37 1.31 33 1.62 41 0.75 19 1.24 32 1.40 36 49 T-179U-7085 250 1.60 41 1.45 37 1.75 44 0.75 19 1.39 35 1.54 39 53 T-189U-7086 100 1.60 41 1.52 39 1.75 44 0.75 19 1.46 37 1.54 39 54 T-18-X9U-7087 100 1.68 43 1.56 40 1.88 48 0.75 19 1.50 38 1.62 41 55 T-19276-0754 100 1.75 44 1.60 41 1.93 49 0.75 19 1.56 40 1.68 43 56 T-199U-7088 100 1.88 48 1.75 44 2.03 52 0.75 19 1.69 43 1.82 46 57 T-2109U-7089 100 1.94 49 1.81 46 2.13 54 1.00 25 1.75 44 1.88 48 58 T-21276-0755 100 2.02 51 1.84 47 2.12 54 1.00 25 1.78 45 1.93 49 60 T-22-S276-0756 100 2.16 55 1.98 50 2.25 57 1.00 25 1.91 49 2.11 54 63 T-25-A276-0757 100 2.25 57 2.06 52 2.43 62 1.03 26 2.00 51 2.17 55 66 T-2409U-7090 50 2.26 57 2.23 57 2.50 64 0.50 13 2.17 55 2.20 56 68 T-240



02b.qxp 10/5/06 1:26 PM Page 51

Tapered Dual-Function Caps and Plugs (cont’d)

Use as a plug Use as a capPkg. A B C D E F Supplier

Part No. Qty. (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) Part No.

9U-7091 50 2.47 63 2.30 58 2.63 67 1.00 25 2.24 57 2.40 61 71 T-43-A276-0758 50 2.60 66 2.39 61 2.62 67 1.00 25 2.33 59 2.54 65 73 T-44276-0759 50 2.69 68 2.56 65 2.87 73 0.75 19 2.50 64 2.62 67 77 T-449U-7092 50 2.79 71 2.65 67 3.00 76 0.50 13 2.58 66 2.73 69 78 T-45-A6V-7494 50 3.00 76 2.74 70 3.13 79 1.00 25 2.68 68 2.94 75 81 T-57-A276-0760 50 3.24 82 2.98 76 3.37 86 1.00 25 2.90 74 3.16 80 85 T-5019U-7094 50 3.45 88 3.32 84 3.63 92 0.50 13 3.24 82 3.37 86 87 T-10509U-7095 50 3.58 91 3.24 82 3.94 100 1.00 25 3.16 80 3.49 89 88 T-1051276-0761 50 3.75 95 3.55 90 4.00 102 1.00 25 3.47 88 3.67 93 K-851 T-502276-0762 50 3.92 100 3.80 97 4.12 105 0.68 17 3.71 94 3.84 98 91 T-10639U-7096 50 4.46 113 4.22 107 5.00 127 1.00 25 4.14 105 4.38 111 94 T-10766V-7496 50 4.62 117 4.37 111 5.00 127 1.00 25 4.29 109 4.50 114 95 T-1076

Straight Cap

ID: D01671T1

Straight Cap

Pkg. A B C D EPart No. Qty. Material (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm)

217-1591 50 1 1.25 31.65 0.67 17 1 25.22 1.06 26.82 0.05 1.4

Non-threaded Caps

ID: D01677T1Non-threaded Cap Protectors

Pkg. Diam. A Length BPart No. Qty. Material1 (in) (mm) (in) (mm)

9U-7166 250 1 0.13 3 0.63 169U-7167 250 1 0.25 6 0.88 229U-7168 250 1 0.30 7 0.88 229U-7169 250 1 0.38 10 0.88 229U-7170 250 1 0.44 11 0.88 229U-7171 250 1 0.50 13 0.88 229U-7172 250 1 0.56 14 0.88 229U-7173 250 1 0.63 16 0.88 229U-7174 100 1 0.69 17 0.88 229U-7175 100 1 0.75 19 0.88 229U-7176 100 1 0.81 21 0.88 229U-7177 100 1 0.88 22 0.88 229U-7178 100 1 1.00 25 0.75 199U-7179 100 1 1.06 27 0.88 229U-7180 100 1 1.19 30 1.00 259U-7181 100 1 1.25 32 0.88 22


Caps and PlugsSh

op S

uppl

ies

Non-threaded Cap Protectors

Pkg. Diam. A Length BPart No. Qty. Material1 (in) (mm) (in) (mm)

9U-7182 100 1 1.31 33 0.88 229U-7183 100 1 1.38 35 0.88 229U-7184 100 1 1.44 37 0.88 229U-7185 100 1 1.50 38 0.88 229U-7186 100 1 1.63 41 1.00 259U-7187 100 1 1.69 43 0.88 229U-7188 100 1 1.75 44 0.88 229U-7189 100 1 1.88 48 0.88 229U-7190 100 1 2.00 51 0.88 229U-7191 100 1 2.13 54 0.88 229U-7192 100 1 2.38 60 0.88 229U-7193 100 1 2.50 64 0.88 229U-7194 50 1 3.13 79 1.38 35

1 1 - Grade 1 Virgin Polyethylene2 - Low Density Polyethylene3 - High Density Polyethylene

02b.qxp 10/5/06 1:26 PM Page 52

ID: D01695T1

Threaded Caps

ID: D01227T1

ID: D01689T1

Metric Threaded Plug Protectors

MetricThread

Pkg. Size A B CPart No. Qty. Material1 (dia x pitch) (in) (mm) (in) (mm) (in) (mm)

9U-7136 100 2 M10 x 1.0 0.57 15 0.60 15 0.41 10

9U-7137 100 2 M12 x 1.0 0.66 17 0.73 19 0.42 11

9U-7138 50 2 M14 x 1.5 0.68 17 0.73 19 0.37 10

9U-7139 50 2 M16 x 1.5 0.68 17 0.87 22 0.50 13

9U-7140 50 2 M18 x 1.5 0.72 18 0.96 24 0.54 14

9U-7141 50 2 M20 x 1.5 0.72 18 1.04 26 0.55 14

9U-7142 50 2 M22 x 1.5 0.72 18 1.11 28 0.54 14

9U-7143 50 2 M24 x 1.5 0.73 19 1.23 31 0.54 14

9U-7144 50 2 M26 x 1.5 0.73 19 1.46 37 0.54 141 1 - Grade 1 Virgin Polyethylene 2 - Low Density Polyethylene 3 - High Density Polyethylene



Metric Threaded Cap Protectors

MetricThread

Pkg. Size A B CPart No. Qty. Material1 (dia x pitch) (in) (mm) (in) (mm) (in) (mm)

9U-7145 100 2 M10 x 1.0 0.39 10 0.54 14 0.29 8

9U-7146 100 2 M12 x 1.5 0.47 12 0.62 16 0.37 10

9U-7147 100 2 M14 x 1.5 0.47 12 0.70 18 0.37 10

9U-7148 100 2 M16 x 1.5 0.47 12 0.78 20 0.37 10

9U-7149 100 2 M18 x 1.5 0.55 14 0.85 22 0.45 12

9U-7150 100 2 M20 x 1.5 0.55 14 0.92 24 0.37 10

9U-7151 50 2 M22 x 1.5 0.54 14 1.02 26 0.45 12

9U-7152 50 2 M24 x 1.5 0.55 14 1.14 29 0.45 12

9U-7153 50 2 M26 x 1.5 0.55 14 1.18 30 0.45 121 1 - Grade 1 Virgin Polyethylene 2 - Low Density Polyethylene 3 - High Density Polyethylene

Threaded and Slotted Plug Protectors

Thread TubePkg. Size Diameter A B C D

Part No. Qty. Material1 (in - TPI) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm)

9U-7104 250 3 7⁄16 - 20 0.43 11 0.62 16 0.18 5 0.30 8

9U-7105 100 3 1⁄2 - 20 0.50 13 0.68 12 0.18 5 0.36 9

9U-7106 100 3 9⁄16 - 18 0.50 13 0.75 19 0.18 5 0.33 8

9U-7107 100 3 3⁄4 - 16 0.68 17 0.94 24 0.19 5 0.44 11

9U-7108 100 3 7⁄8 - 14 0.75 19 1.06 27 0.24 6 0.50 13

9U-7109 100 3 11⁄16 - 14 0.87 22 1.31 33 0.25 6 0.62 16

9U-7110 50 3 13⁄16 - 12 1.00 25 1.50 38 0.30 8 0.70 18

9U-7111 50 3 15⁄16 - 12 1.00 25.4 1.07 27 1.62 41 0.30 8 0.70 18

9U-7112 50 3 15⁄8 - 12 1.13 29 1.88 43 0.30 8 0.75 19

9U-7113 50 3 17⁄8 - 12 1.50 38 2.13 54 0.30 8 0.75 191 1 - Grade 1 Virgin Polyethylene 2 - Low Density Polyethylene 3 - High Density Polyethylene

02b.qxp 10/5/06 1:26 PM Page 53

ID: D01701T1 Threaded Plug Protectors for Flared Fittings

Thread TubePkg. Size Diameter

Part No. Qty. Material1 (in - TPI) (in) (mm)

9U-7114 250 1 7⁄16 - 20 0.25 6.4

9U-7115 250 1 9⁄16 - 18 0.38 9.5

9U-7116 250 1 3⁄4 - 16 0.50 12.7

9U-7117 100 1 7⁄8 - 14 0.63 15.9

9U-7118 100 1 11⁄16 - 12 0.75 19.1

9U-7119 100 1 15⁄16 - 12 1.00 25.41 1 - Grade 1 Virgin Polyethylene

2 - Low Density Polyethylene3 - High Density Polyethylene

ID: D01239T1Plug Protectors for NPT Thread — Square Head

ThreadPkg. Size A B

Part No. Qty. Material1 (in - TPI) (in) (mm) (in) (mm)

9U-7098 250 3 1⁄8 - 27 0.28 7 0.38 10

9U-7099 250 3 1⁄4 - 18 0.38 10 0.44 11

9U-7100 250 3 3⁄8 - 18 0.44 11 0.50 13

9U-7101 250 3 1⁄2 - 14 0.56 14 0.56 14

9U-7102 100 3 3⁄4 - 14 0.69 17 0.63 161 1 - Grade 1 Virgin Polyethylene


ID: D01713T1

Plug Protectors for NPT Thread — Knurled Head

ThreadPkg. Size A B C D

Part No. Qty. Material1 (in - TPI) (in) (mm) (in) (mm) (in) (mm) (in) (mm)

9U-7103 100 3 1 - 111⁄2 0.50 13 1.57 40 0.25 6 1.18 301 1 - Grade 1 Virgin Polyethylene 2 - Low Density Polyethylene 3 - High Density Polyethylene


Caps and PlugsSh

op S

uppl

ies

02b.qxp 10/5/06 1:26 PM Page 54

ID: C79725T1

British Thread — BSP/GAS Plug Protectors

ThreadPkg. Size A B C

Part No. Qty. Material1 (in - TPI) (in) (mm) (in) (mm) (in) (mm)

9U-7195 100 2 1⁄8 - 28 0.41 11 0.65 16 0.16 4

9U-7196 100 2 1⁄4 - 19 0.50 13 0.74 19 0.26 7

9U-7197 100 2 3⁄8 - 19 0.47 12 0.90 23 0.27 6

9U-7198 100 2 1⁄2 - 14 0.68 17 1.10 28 0.41 10

9U-7199 50 2 5⁄8 - 14 0.72 18 1.23 31 0.51 13

9U-7200 50 2 3⁄4 - 14 0.67 17 1.27 32 0.43 11

9U-7201 50 2 7⁄8 - 14 0.71 18 1.50 38 0.53 14

9U-7202 50 2 1 - 11 0.66 17 1.57 40 0.42 111 1 - Grade 1 Virgin Polyethylene 2 - Low Density Polyethylene 3 - High Density Polyethylene

ID: C79746T1

SAE Code Flange 61 Bolted Protectors

ThreadPkg. Size

Part No. Qty. Material1 (in - TPI)

9U-7154 25 1 1⁄2 NPT

9U-7155 25 1 3⁄4 NPT

9U-7156 25 1 1 NPT

9U-7157 25 1 11⁄4 NPT

9U-7158 25 1 11⁄2 NPT

9U-7159 25 1 2 NPT

9U-7160 25 1 21⁄2 NPT

1 - Grade 1 Virgin Polyethylene2 - Low Density Polyethylene3 - High Density Polyethylene

ID: C79775T1

SAE Code 62 and Caterpillar Flange Bolted Protectors

ThreadPkg. Size

Part No. Qty. Material1 (in - TPI)

9U-7161 25 1 3⁄4 NPT

9U-7162 25 1 1 NPT

9U-7163 25 1 11⁄4 NPT

9U-7164 25 1 11⁄2 NPT

9U-7165 25 1 2 NPT

1 - Grade 1 Virgin Polyethylene2 - Low Density Polyethylene3 - High Density Polyethylene

ID: D01719T1



Tear Cap Protectors for Standard Thread

ThreadPkg. Size JIC/SAE A B

Part No. Qty. Material1 (in - TPI) Fitting (in) (mm) (in) (mm)

9U-7120 250 1 7⁄16 - 20 4-TS 0.46 12 0.43 11

9U-7121 250 1 1⁄2 - 20 5-TS 0.46 12 0.49 12

9U-7122 250 1 9⁄16 - 18 6-TS 0.48 12 0.55 14

9U-7123 250 1 11⁄16 - 16 7-TS 0.48 12 0.67 17

9U-7124 250 1 3⁄4 - 16 8-TS 0.56 14 0.74 19

9U-7125 250 1 13⁄16 - 16 9-TS 0.56 14 0.80 20

9U-7126 250 1 7⁄8 - 14 10-TS 0.65 17 0.87 22

9U-7127 250 1 1 - 14 11-TS 0.65 17 0.99 25

9U-7128 250 1 11⁄16 - 12 12-TS 0.75 19 1.05 27

9U-7129 250 1 13⁄16 - 12 13-TS 0.75 19 1.17 30

9U-7130 100 1 15⁄16 - 12 16-TS 0.75 19 1.30 33

9U-7131 100 1 17⁄16 - 12 17-TS 0.75 19 1.43 36

9U-7132 100 1 15⁄8 - 12 20-TS 0.83 21 1.62 41

9U-7133 100 1 111⁄16 - 12 21-TS 0.83 21 1.67 42

9U-7134 100 1 17⁄8 - 12 24-TS 0.95 24 1.87 48

9U-7135 50 1 21⁄2 - 12 32-TS 1.20 30 2.49 631 1 - Grade 1 Virgin Polyethylene


02b.qxp 10/5/06 1:26 PM Page 55

ID: C33303T1

WiltonCat Part Jaw Throat Max. Shipping ReplacementPart No. No. Width Depth Opening Weight Jaw Inserts

4C-3751 350S 31⁄2 in 23⁄4 in 51⁄4 in 46 lb 4C-4397

4C-3752 400S 4 in 31⁄2 in 61⁄2 in 66 lb 4C-4398

4C-3753 450S 41⁄2 in 43⁄16 in 71⁄2 in 73 lb 4C-4394

4C-3754 500S 5 in 41⁄4 in 8 in 97 lb 4C-4399

Combination Pipe and Bench VisesWarranty: Manufacturer’s

• Stressed parts made of 60,000 PSI tensile strength ductile iron• Replaceable hardened steel jaw inserts• Hardened, replaceable steel pipe jaws• Alloy steel slide bar

ID: C33304T1


VisesSh

op S

uppl

ies

Vises

Tradesman VisesWarranty: Manufacturer’s

• Replaceable, hardened steel serrated jaw inserts and replaceable pipe jaws• Precision, machined keyed slide bar• Built for maximum quality and performance• Straight line design means no wear on spindle or nut• 360° swivel base, double lockdowns• Side play eliminated by precision machined slide bar — keyed for precision• Fully enclosed design keeps dirt and contaminants out

ID: C33302T1

ReplacementCat Jaw Pipe Throat Max. Shipping Replacement Pipe JawPart No. Width Capacity Depth Opening Weight Jaw Insert Kits Inserts

233-8145 4 in 1⁄4 in-2 in 37⁄16 in 41⁄2 in 37 lb 236-2646 236-2654

233-8146 5 in 1⁄4 in-21⁄2 in 33⁄4 in 51⁄4 in 50 lb 236-2647 236-2655

233-8147 6 in 1⁄4 in-31⁄2 in 41⁄8 in 53⁄4 in 64 lb 236-2648 236-2656

188-2163 8 in 1⁄8 in-31⁄2 in 43⁄4 in 7 in 109 lb 188-2171 188-2752

Replacement Parts for Non Current Vises

ReplacementCat Jaw Replacement Pipe JawPart No. Width Jaw Insert Inserts

188-2143 41⁄2 in 188-2165 4C-4400

188-2145 51⁄2 in 188-2167 4C-4400

188-2147 61⁄2 in 188-2170 4C-4400

4C-3741 4 in 4C-4391 4C-4400

4C-3742 5 in 4C-4392 4C-4400

4C-3743 6 in 4C-4393 4C-4400

ReplacementCat Wilton Jaw Pipe Throat Max. Shipping Replacement Pipe JawPart No. Part No. Width Capacity Depth Opening Weight Jaw Inserts Inserts

4C-3744 C-1 41⁄2 in 1⁄8 in-31⁄2 in 43⁄4 in 6 in 80 lb 4C-4394 4C-4401

4C-3745 C-2 5 in 1⁄8 in-41⁄2 in 55⁄16 in 7 in 113 lb 4C-4395 4C-4402

4C-3746 C-3 6 in 3⁄8 in-6 in 65⁄8 in 9 in 209 lb 4C-4396 4C-4403

Machinist VisesWarranty: Manufacturer’s

• Stressed parts made of 60,000 PSI tensile strength ductile iron• Straight line design guarantees a lifetime spindle and nut• Precision slide bar is moveable, maintained with hardened steel key, insuring a .002 mm fit• 360° slip proof swivel base—serrated teeth and double lockdowns• Largest anvil of any machinists’ vise

02b.qxp 10/5/06 1:26 PM Page 56

ID: C41331T1

ID: C41332T1

Model P — Prism Magnefix Jaw Caps

• Jaw construction includes a 120° horizontal Vee-Groove, 3 vertical Vee-Grooves and a 90° groove for marking out and center punching• Ideal for light tapping and thread cutting applications• Capable of clamping a block of material in a vise to be utilized as a surface plate for light duty work• Jaw caps sold separately

ID: C41333T1

Cat Jaw Use with these Vises or anyPart No. Width other with same jaw width:

4C-6834 4 in 4C-3741, 4C-3752

4C-6835 41⁄2 in 4C-3753, 4C-3744

4C-6836 5 in 4C-3742, 4C-3754, 4C-3745

4C-6837 6 in 4C-3743, 4C-3746

Jaw Caps

• Designed to avoid marring the surface of softer metals and to protect jaw faces• Made to fit any size vise• Polished faces and pliable copper extensions for a sure-grip fit on any make vise

ID: C33305T1

Part No. Description Width

4C-3750 Jaw Cap 4 inch

4C-3749 Jaw Cap 41⁄2 inch




VisesShop Supplies

Model R — Rubber Face Magnefix Jaw Caps

• Aluminum alloy with synthetic rubber cover• Jaw cap conforms to workpiece and grips firmly without slipping• Designed to prevent cushioning during use• Use in combination with Prism Jaw Caps to clamp taper pins or tapered work-pieces• Mar-free• Jaw caps sold separately

ID: C41330T1

Cat Jaw Use with these Vises or anyPart No. Width other with same jaw width:

4C-6830 4 in 4C-3741, 4C-3752

4C-6831 41⁄2 in 4C-3753, 4C-3744

4C-6832 5 in 4C-3742, 4C-3754, 4C-3745

4C-6833 6 in 4C-3743, 4C-3746

02b.qxp 10/5/06 1:26 PM Page 57

Regular Duty, Standard Throat C-Clamps

• Recommended for regular-duty work not requiring unusual throat depth• Drop forged from specially selected steels• Light enough for production line use• Equipped with Wilton Permapads® and lifetime lubricated spindles of through-hardened steel• Finished in grey enamel

ID: C33306T1

Throat Spindle MinimumPart No. Capacity Depth Dia. Proof Test Weight

4C-3755 0 - 2 in 113⁄16 in 9⁄16 in 2,700 lb 13⁄8 lb

4C-3756 0 - 3 in 115⁄16 in 9⁄16 in 3,000 lb 12⁄3 lb

4C-3757 0 - 4 in 25⁄16 in 5⁄8 in 3,700 lb 23⁄4 lb

4C-3758 0 - 6 in 215⁄16 in 5⁄8 in 4,500 lb 33⁄4 lb

4C-3759 2 in - 8 in 37⁄16 in 3⁄4 in 5,200 lb 7 lb

4C-3760 11⁄2 in - 10 in 33⁄4 in 3⁄4 in 6,000 lb 83⁄8 lb

4C-3761 11⁄8 in - 12 in 37⁄8 in 3⁄4 in 8,000 lb 12 lb


VisesSh

op S

uppl

ies

2P-8338 Holding Fixture

• Mounts on workbench• Use to secure components during assembly and disassembly• Capable of holding small transmissions, differentials, hydraulic pumps,

water pumps and electrical components

ID: 57495T1

Capacity 250 lb

127-1909 Yoke Pipe Vise

• Used to brace pipe for cutting and machining• Use for pipe from 10 through 102 mm (1⁄8 through 31⁄2 in)• Weight: 7.39 kg (16.3 lbs)

02b.qxp 10/5/06 1:26 PM Page 58

Battery Service Equipment

Multi-Battery Parallel ChargersWarranty: Manufacturer’s

• Each battery accepts the charge it requires, depending on its size, state of charge, and temperature; the initial high charge rates taper down to a safe finishing level

• No moving parts — little maintenance• Isolated transformer for safety• Heavy-duty diode rectifier with deep reserve capacity• Circuit breaker protection• Mounts on wall or bench• UL listed

ID: C33374T1

ID: C33375T1

Part No. 4C-4913 4C-4914 4C-9799

DC output rating 30 Amps, 14.9 Volts 110 Amps, 15.5 Volts 30 Amps, 14.9 Volts

AC input rating 108-132 Volts, 7.5 Amps 190-262 Volts, 13.8 Amps 210-250 Volts, 4 Amps60 Hz, single phase 50/60 Hz, single/3 phase 50/60 Hz, 3 phase

Charging capacity 1-10, 12 Volt batteries 1-36, 12 Volt batteries 1-10, 12 Volt batteries

No. of charge rates 16 16 16

Voltmeter/ammeter 11-17/0-50 11-17/0-110 11-17/0-50

DC charging cables 1.83 m (6 ft) 1.524 m (5 ft) 1.83 m (6 ft)

AC connection 2.286 m (61⁄2 ft) AC cord Permanent installation only 2.286 m (61⁄2 ft) AC cord

Weight 18.14 kg (40 lbs) 37.64 kg (83 lbs) 18.14 kg (40 lbs)

Dimensions (HWD) 38.1 x 30.5 x 28 cm 55.9 x 38.1 x 28 cm 40.6 x 33.7 x 62.2 cm(15 in x 12 in x 11 in) (22 in x 15 in x 11 in) (16 in x 13.25 in x 24.5 in)

4C-4917 Bus Bar Set 1 Up to 4 1

9U-5784 Battery Charging RackWarranty: Manufacturer’s

• DC charging leads — 10 pair, 10 gauge, 914.4 mm (36 in) long with 300 Amp insulated safety clamps• Insulated storage bars and connections ensure there are no live electrical connections• 3-shelf rack stores up to 12 batteries• Durable 3 mm (1⁄8 in) polypropylene sheet protects shelves from damage• Acid resistant — resists scratching and chipping• Convenient snap together heavy-gauge steel construction

ID: C44065T1

4C-4917 Bus Bar SetWarranty: Manufacturer’s

• Parallel charging — 10 battery capacity — use one bus bar or combine several for added capacity• Insulated fiberglass backboard• DC charging leads — 10 pair, 10 gauge, 914.4 mm (36 in) long with 300 Amp insulated safety clamps• .9 m (3 ft) 4 AWG cables included to connect to charger or additional bus bars


Battery Service EquipmentShop Supplies

ID: C33378T1

02b.qxp 10/5/06 1:26 PM Page 59

Growler Armature TesterWarranty: Manufacturer’s

• Detects and locates defects in generator and starter armatures• Also tests armatures in heaters, fans, electric tools, etc.• Checks continuity and insulation• Accepts armatures 22.2 mm (7⁄8 in) to 203.2 mm (8 in) diameter• 609.6 mm (24 in) test leads with accompanying test light• Chrome-plated handles help protect instrument panel• UL listed

ID: C33373T1


4C-4912 120 V, 50/60 Hz

4C-9800 220 V, 50/60 Hz

Heavy-Duty Commercial Fast ChargersWarranty: Manufacturer’s

• Highest performance fast chargers on the market• Designed for the demands of the professional mechanic and fleet operator• Model 4C-4920 has 16 rates of charge and the highest boost rating of any fast charger• Model 4C-4921 and 4C-4910 charge all 6, 12, 18, and 24 Volt batteries• Heavy-duty transformers, patented multi-diode rectifiers, long AC cords and DC leads• Patented stop/go light and automatic timer• Automatic reset AC and DC circuit breakers• Heavy-duty chrome plated handle• Rugged, 177.8 mm (7 in) wheels• 500 Amp, fully insulated, flexi-spring clamps• UL and CSA listed for indoor and outdoor use

ID: C79699T1UL ULContinuous Cranking UL Boost

Input Ratings Assist Rate Rate AC DC Clamp Wt.Part. No. Volt (Amps) (Amps) (Amps) Cord Leads Rating Volt kg lbs

4C-4920 110 100/70 300 550 10 ft 14-3 8 ft 4AWG 500A 6/12 26.3 58

4C-4921 110 100/75/50/40 300 600 10 ft 14-3 8 ft 4AWG 500A 6/12/18/24 31.7 70

4C-4910 220 100/75/50/40 300 600 10 ft 14-3 8 ft 4AWG 500A 6/12/18/24 31.7 70

4C-4924 and 4C-4925 Portable ChargersWarranty: Manufacturer’s

• Charges all standard and maintenance-free batteries with four charging positions• Heavy-duty chrome plated handles• Fan cooled• UL and CSA listed for indoor/outdoor use

4C-4924 also features• Automatic timer — 90 minute

and “hold” position• AC and DC circuit overload protection• Patented stop/go light

ID: D01605T1


Battery Service EquipmentSh

op S

uppl

ies

UL Continuous UL Cranking UL BoostRatings Assist Rate Rate AC DC Clamp Weight

Part. No. (Amps) (Amps) (Amps) Cord Leads Rating Volt kg lbs

4C-4924 70/60 230 420 61⁄2 ft 16-3 7 ft 4AWG 500A 6/12 17.2 38

4C-4925 40/10/2 132 250 61⁄2 ft 16-3 6 ft 8AWG 200A 6/12 11.8 26

ID: C79679T1

02b.qxp 10/5/06 1:26 PM Page 60

200-6319 Portable Charger, 110 V, 60 HzWarranty: Manufacturer’s

• Charges 12 Volt systems, lead acid, AGM, and GEL batteries• Automatically shuts off when battery is charged• 3 LED indicators for power, charging, and proper polarity/charge complete• Lightweight• UL listed

ID: C80276T1

Charging Output AC/DC Cables Weight

10 amps 16 ft, 16 gauge 11 lbs 4oz

CablesWarranty: Manufacturer’s

• Polarized plug on both ends• Mates with either 4C-9917 or 4C-4943 Power Socket

ID: C44332T1

Part No. Description Mates with

4C-9802 3.66 m (12 ft) 1 AWG 4C-9917 Power Socket

4C-9801 3.66 m (12 ft) 4 AWG 4C-4943 Power Socket

Booster CablesWarranty: Manufacturer’s

• Professional quality• Ensure quick and efficient connections• Designed for convenience and safety

ID: C33385T1

Side Approx.Cir. Mil. Amp Terminal Individual

Part No. Length Gauge Copper Jacket Clamp Adapters Weight

4C-4933 3.66 m (12 ft) 4 AWG 37,360 PVC 500E yes 2.7 kg (6 lbs)

4C-4934 1 3.66 m (12 ft) 4 AWG 32,900 T-94 500E yes 3.6 kg (8 lbs)

4C-4935 4.8768 m (16 ft) 4 AWG 37,360 PVC 500E yes 3.6 kg (8 lbs)

4C-4936 6 m (20 ft) 4 AWG 37,360 PVC 500E yes 4.1 kg (9 lbs)

300-5899 6 m (20 ft) 2 AWG 62,450 PVC 600P yes 6.4 kg (14 lbs)

4C-4938 4.572 m (15 ft) 1/0 AWG 106,400 T-94 800 no 7.3 kg (16 lbs)1 Equipped with stop/go light — red L.E.D.s warn operator if polarity is reversed



02b.qxp 10/5/06 1:26 PM Page 61

Replacement ClampsWarranty: Manufacturer’s

• Professional quality clamps for all booster cables, chargers and testers• Package: 1 pair per see-through display carton

For Use “Flexi- Wt. PerPart No. Amps Jaws Insulation With Cable Spring” Master

4C-4940 500 Copper Bonded Vinyl 3, 4, 6 ga. Yes 4.0 kg (9 lbs)

4C-4942 800 Heavy Gauge Copper Bonded Vinyl 1, 2 ga. Yes 4.5 kg (10 lbs)

4C-5638 and 4C-5637 Post SetWarranty: Manufacturer’s

ID: C33388T1ID: C33389T1

Part. No Description

4C-5637 10 mm (3⁄8 in) female for stud type batteries

4C-5638 10 mm (3⁄8 in) male for side terminal batteries

4C-4931 Flush Mount Power SocketWarranty: Manufacturer’s

• Alternative to cabinet style socket — stainless steel plate mounts flush on service vehicle• Same features as power socket included in 4C-4929• For a complete starting system, order 4C-4931 and 4C-4944 Plug-In Cables

ID: C33383T1

4C-4929 Heavy-Duty Plug-In Starting SystemWarranty: Manufacturer’s

Power Socket• New stainless steel cabinet resists corrosion• Polarized socket with solid copper contacts• 1.5 m (5 ft) connecting cables for service battery hook-up (4 AWG)

Plug-In Cables• Army/Navy Lexan® plug — won’t break in coldest weather• Heavy-duty cables, 7.62 m (25 ft) 4 AWG. Jacket resists oil

and abrasion — stays flexible to 4.4°C (-40°F)• 500 Amp insulated clamps with Flexi-Spring cable guards

Patented Safety Light• Warns operator before a reversed connection is made• Side terminal adapters — grip hard-to-reach side terminals• Weight: 7.7 kg (17 lbs)

ID: C80220T1

Service Parts


4C-4943 Power Socket with battery cable

4C-4946 Polarized Lexan® Plug, .45 kg (1 lb)

4C-4945 Power Socket only

4C-4944 Plug-in Cable (includes clamps)


Battery Service EquipmentSh

op S

uppl

ies

02b.qxp 10/5/06 1:26 PM Page 62

4C-4930 Extra Heavy-Duty Plug-In Starting SystemWarranty: Manufacturer’s

Power Socket• New stainless steel cabinet resists corrosion• Polarized socket with solid copper contacts• 1.5 m (5 ft) connecting cables for service battery hook-up (1 AWG)

Plug-In Cables• Army/Navy Lexan® plug — won’t break in coldest weather• Heavy-duty cables, 7.62 m (25 ft) 1 AWG. Jacket resists oil and abrasion — stays flexible to 4.4°C (-40°F)• 800 Amp insulated clamps with Flexi-Spring cable guards

Patented Safety Light• Warns operator before a reversed connection is made• Weight: 11.8 kg (26 lbs)

ID: C33384T1

Service Parts


4C-9917 Power Socket with battery cable



02b.qxp 10/5/06 1:26 PM Page 63

Vehicular Caterpillar® Batteries and Worklights

ID: D01579T1 ID: D00288T1

Cat 4D and 8D Batteries - Premium High Output

• Exclusive flat top design—Maintenance Free• Designed by Caterpillar to meet demanding off-road performance tests—100-hour vibration tested• Industry’s highest cold cranking Amps (CCA’s) for 4D and 8D batteries—sure starts• Built in flame arrester vents• Calcium lead alloy on both positive and negative plates for minimal water loss

BCI Group Cold Cranking Reserve CapacityApplication Size Part No. Amps (CCA) (RC) (minutes)

Bus/RV/Concrete Mixers 4D 153-5700 1125 305

Bus/RV/Concrete Mixers 4D 153-5710 1400 425

Bus/RV/Concrete Mixers 8D 153-5720 1500 465ID: D00136T1


Vehicular Caterpillar®

Batteries and WorklightsSh

op S

uppl

ies

Premium High Output (PHO) batteries are manufactured to Caterpillar designspecifications for vibration resistance, deep discharge, long life in all climates,and heavy-duty life cycle capability. PHO batteries are used as original equipmentin all Caterpillar machines. They are available worldwide in Maintenance Free or Dry configurations.

Premium High Output Batteries• Cold Starting: Thicker internal Terminal Posts provide lower electrical

resistance resulting in higher output under starting conditions. Extra-heavyGrids…with denser lead within Plates…Provides more life and power inextreme cold or heat. True all-weather performance.

• Starting/Deep Cycle Capability: Starting batteries have Polyethylene Envelope Separators to protect against shorts. Cycling batteries have Glass Mat Separators that are double insulated for longer deep cycle life.

• Discharge Cycles: Positive and Negative Plates have a higher paste densityallowing them to better resist material shedding during discharge cycles. An enveloped Negative Plate protects against shorts.

• Water Loss: Calcium lead alloy is used on both the positive and negativeplates to reduce gassing. Calcium technology allows for minimal water lossover the life of the battery.

• Corrosion Resistance: Forged terminal post bushings provide maximumstrength and resistance to acid seepage that causes corrosion and black posts.Thicker internal terminal posts are used for lower electrical resistance andhigher output under starting conditions. Less maintenance is needed becauseextra corrosion resistance and overcharge protection are built in.

• Flame Arrestor Safety Vents: Built into the manifold cover, they reduce thepossibility of explosion from external sparks. They direct corrosive gases awayfrom the battery and hold-downs. Allows for remote venting out of the batterycompartment.

• Robust Design: Thicker, more robust container resists the demanding, ruggedtreatment typical of heavy-duty commercial use—especially in temperatureextremes. The outside of the robust case identifies this as a CaterpillarBattery. Maintenance Free Flat Top Design allows – easy mounting and power washing – no vent caps falling off. Side brickwork and waffle design on bottom of the case resist punctures. Raised Caterpillar Part Number anddescriptors won’t wear off and provide for easy and accurate replacement by technicians.

02b.qxp 10/5/06 1:27 PM Page 64

Cat Racing Batteries for On-Highway Vehicles - Premium High Output

• Maintenance Free—stud terminals with accessible cover capability• Designed by Caterpillar to meet demanding performance tests—100-hour vibration tested

(5 times the industry standard)• Calcium lead alloy on both positive and negative plates for minimal water loss• 36 month prorated warranty (see dealer for details)• Highest CCA’s in the industry for deep cycle applications

ID: D01579T1



Batteries and WorklightsShop Supplies


Ideal cycling/starting battery for sleeper cab, reefers, buses, RV’s, school buses. Also for applications with extensive idle or use of in-cab accessories. 3+1 and 4+0 systems GP31 175-4360 710 185

Ideal general purpose starting/cycling battery for applications that include long hauls, local runs, and light-duty cycling/key-off accessory usage GP31 175-4370 825 190

Ideal starting battery. Industry’s highest CCA rating. Over-the-road applications where starts are infrequent and battery cycling is limited GP31 175-4390 1000 180

ID: D01591T1

Cat Batteries for Recreational and Automotive Use - Premium High Output

• Maintenance-free design• Designed by Caterpillar to meet demanding performance tests – 100-hour vibration tested (5 times the industry standard)• Calcium lead alloy on both positive and negative plates for minimal water loss• 72- and 36-month prorated warranties (see dealer for details)• Highest CCA’s in the industry for deep cycle applications


Deep cycle applications – dual-terminal marine 31pleasure craft/trolling motors, RVs (stud and post terminals) 250-0480 710 185

Automotive applications – ideal for vehicles withhigh under-hood heat and numerous electronicaccessories 24 153-5656 650 110

Automotive applications – ideal for vehicles withhigh under-hood heat and numerous electronic 74accessories (side terminals) 153-5660 650 110

Automotive applications – ideal for vehicles with high under-hood head and numerous electronicaccessories 58 175-4280 500 70

Automotive, commercial and gen-set applications.Compact design with high cold cranking amps 65 230-6368 880 140

ID: D01585T1

02b.qxp 10/5/06 1:27 PM Page 65

Floodlights

• Economically priced 3 inch x 3 inch halogen floodlights for use in a wide range of on-highway truck and recreational vehicle applications—back-of-cab floodlight next to the trailer hookup, floodlights inside cargo trailers, floodlights to illuminate the work site for construction, mixer, and farm trucks

• Available in wide- and long-range floodlight patterns• Advanced optical reflector provides light output approaching 5 inch x 5 inch lights• Vertical and suspended mounts with swivel capability (mounting bracket included)• 24-Volt (65-watt) or 12-Volt (55-watt)• Halogen bulb serviced with only a screwdriver• Easy to install using sturdy, integral (mounted-in-housing) DT (Deutsch) connectors• Excellent vibration, temperature and moisture resistance for longer life (environmentally

sealed—lights must pass Caterpillar design specifications for resistance to water spray, water dunk, and vibration)

ID: D00106T1

Part # Volts Type of Mounting Description

234-4323 24 Vertical Wide-range Floodlight, 10x25 mm, weld stud

234-4324 24 Vertical Long-range Floodlight, 10x25 mm, weld stud

234-4325 24 Suspended Wide-range Floodlight, 10x25 mm, weld stud

234-4326 24 Suspended Long-range Floodlight, 10x25 mm, weld stud

234-4327 12 Vertical Wide-range Floodlight, 10x25 mm, weld stud

234-4328 12 Suspended Wide-range Floodlight, 10x25 mm, weld stud

234-4329 12 Suspended Long-range Floodlight, 10x25 mm, weld stud



Batteries and WorklightsSh

op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 66

Flashlights and Batteries

9U-7231 Mini-Maglite FlashlightWarranty: Manufacturer’s

• For people on-the-go, can be carried on the hip in its own nylon belt holster• 53⁄4 inches long• Includes two AA batteries

ID: D00101T1

Heavy-Duty Professional FlashlightsWarranty: Manufacturer’s

• High quality• Designed and manufactured in the U.S.A.• Precision machined, high strength aluminum exterior components• Anodized internally and externally for optimum corrosion resistance• Water resistant O-ring seals throughout protecting an internal self-actuating switch• Hi-impact, scratch resistant Lexan® lens• Fast action Linear-Focusing™ flood-to-spot beam with a twist of the wrist• Extra long lamp life, equivalent of 3 or 4 sets of batteries• Approximately 5 to 6 hours operating time per set of batteries• Ambient candle mode for hands free operation• Spare lamp in tail cap• Includes two AA size alkaline batteries (4C-9463), available worldwide• All flashlights have Cat logo

ID: C41348T1

Item Part No. Description Length Batteries

1 1U-7321 Flashlight 254 mm (10 in) long 2 D cell batteries (replacement lamp 4C-9464)

2 1U-7322 Flashlight 310 mm (123⁄16 in) long 3 D cell batteries (replacement lamp 4C-9465)

3 4C-9442 Flashlight 375 mm (143⁄4 in) long 4 D cell batteries (replacement lamp 4C-9466)

Accessories (Warranty: Six Months)

4 4C-9446 Black, nylon, full flap holster for discontinued 1U-7323

5 4C-9447 Black, leather holster for discontinued 1U-7323

6 4C-9448 Mounting Clamp kit for all D cell flashlights, 2 clamps and screws

Heavy-Duty Professional Rechargeable Flashlight AccessoriesWarranty: Manufacturer’s


4C-9470 Halogen Replacement Bulb, Qty. 1 (Maglight)

209-9589 Halogen Replacement Bulb (Brinkman)

4C-9449 Battery Pack, 140 mm (51⁄2 in) D cell, 6 Volt Nicad


Lighting/Electrical Products Flashlights and BatteriesShop Supplies

Heavy-Duty FlashlightsWarranty: Manufacturer’s

• Water-resistant, made of high impact plastic, with corrosion resistant contact parts and a belt ring to prevent loss

• Battery barrier protects bulb and head contacts from impact force• Comes with spare bulb• 4C-9620 meets military standards• Batteries not included

ID: C41346T1ID: C44073T1Part No. Size Batteries Switch Comes with

1U-7319 210 mm (81⁄4 in) long 2 D cell batteries — —

1U-7320 279 mm (11 in) long 3 D cell batteries — —

4C-9620 203 mm (8 in) high 2 D cell batteries 3 position switch Belt clip

02b.qxp 10/5/06 1:27 PM Page 67

1U-7318 Continuity Tester/Flashlight

• Made of high impact plastic• Can be used as a flashlight or continuity tester• Yellow with black cap• 210 mm (81⁄4 in) long• Uses 2 D cell batteries (not included)• 1.82 m (72 in) length continuity wires shipped inside flashlight• Magnet allows your hands to be free for testing• Service Part: 1U-9532 D-Cell Battery

ID: C44286T1

141-1655 Inspection LightWarranty: Manufacturer’s

• Molded in Lexan®, designed to stand up to almost any punishment• Lightweight, super compact light source• Water-tight to 609.6 m (2000 ft)• Shock proof, corrosion proof• Economical, 30-hour long life lamp module• Handy shirt clip• Includes two AA batteries• Includes 90° light bender• Service Part: 4C-6741 Replacement Lamp Module (Qty. 12)

ID: C37610T1

238-8244 Pen Light, White LED269-3123 Pen Light, Blue LEDWarranty: Manufacturer’s

European Union Compliant, CE marked• Made from tempered aircraft aluminum• 100,00 hour lifetime, hi-intensity light emitting diode (LED) bulb• Batteries last up to 60 hours• Includes 3 AAAA batteries• Handy shirt clip• Push end of pen light to momentarily illuminate or twist end clockwise for constant “on”• Waterproof

ID: D00929T1

Flashlight BulbsWarranty: Manufacturer’s

• Ultra high intensity Krypton• Use for increased brightness and visiblility• Built with integral lens providing an even distribution of light with excellent focusing characteristics• Use with alkaline batteries for best economy

Part No. Description Application

4C-9464 Bulb 2 cell C and D flashlights



Special Flashlight Bulbs

4C-9463 Mini MagLite (Qty. 2)

4C-9470 Mag Charg Rechargeable Flashlight

4C-6741 Lamp Module (Qty. 12)


Flashlights and Batteries Lighting/Electrical ProductsSh

op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 68

ID: D00690T1

Pkg. Pkg.Size Alkaline Qty. Heavy-Duty Qty.

C, 1.5 Volt 1U-9531 72 1U-9536 72

D, 1.5 Volt 1U-9532 72 1U-9537 72

AA, 1.5 Volt 1U-9533 96 1U-9538 96

9 Volt 1U-9534 72 1U-9539 72

AAA, 1.5 Volt 1U-9535 96 — —

AAAA, 1.5 Volt 245-3224 6 — —

261-0022 Hi-Energy Battery ChargerWarranty: Manufacturer‘s

• Charges one to four AA or AAA NiMH batteries in 30 minutes (up to 1850 mAh)• ”Smart Charger” — individually monitors cell condition and terminates charging current when charged• Includes ”Trickle Charge” — low rate charge to retain charge level that would otherwise be lost due

to self-discharge and storage• Illuminated LED monitoring lights• Ideal for high-drain applications• DC input 11-16V, 3A (AC adapter included)• Should not be used to charge any other battery type other than NiMH• Only charges one size of battery at a time (do not mix AA and AAA in same charge)

ID: D01245T1

Charge capacityone to four ”AA“ NiMH batteries up to 2100 mAhone to four ”AAA“ NiMH batteries up to 750 mAh

Charging currentAA (1-4 cells) 4 ampsAAA (1-4 cells) 1.5 amps

Trickle chargeAA 50 mAAAA 50 mA

Charging time 30 minutes (up to 1850 mAh)

AC input 110 Volts

261-0024 AA Rechargeable BatteriesWarranty: Manufacturer‘s

• Nickel-metal hydride (NiMH) batteries• Ideal for the most advanced high-drain devices — digital cameras, personal digital assistants (PDA’s),

voltmeters, flashlights, borescopes, analyzers, and many other diagnostic service tools• High-capacity cells provide exceptional power per charge and up to 1000 recharges• Recharge to full power at any time• New batteries should be charged for 24 hours before first use• Good economic and environmental choice

ID: D01377T1

Size AA, 1.2 Volt

Designation ANSI-1.2H2

Voltage 1.2 Volts

Average capacity 2300 mAh

Quantity 4 per package


Lighting/Electrical Products Flashlights and BatteriesShop Supplies

Industrial BatteriesWarranty: Manufacturer’s

Alkaline• Top-of-the-line for maximum

service life• Best for use in high-drain,

continuous use situations

Heavy-Duty• Ideally suited for normal

industrial use

02b.qxp 10/5/06 1:27 PM Page 69

261-8322 Surge Suppression Plug Strip

• Six outlets with a 1.83 m (6 ft) cord• “Correct Wiring” LED indicator light• “Surge Status” LED indicator light• Color: office white• Material: plastic

ID: D01383T1

Peak current rating 27KA

Maximum continuous operating voltage 130V

Maximum surge current 27KA

UL 1449 clamping voltage 400V

Dimensions (L x H x W) 295 x 43 x 61 mm (11.6 x 1.7 x 2.4 in)

Lantern BatteryWarranty: Manufacturer’s

• Offers dependable high performance for portable lighting uses• Recommended for all industrial lanterns

ID: D00696T1

Pkg. Part No. Description Qty.

1U-9547 Lantern Battery, Spring Terminal, 6 Volt 12

Work Lights and Extension Cords

189-3628 Magnetic Base Flood/Spot LightWarranty: Manufacturer’s

• Dual beam light, 7.36 amps• Spotlight: 200,000 candlepower

Floodlight: 100,000 candlepower• Magnetic base bracket mount has full swivel-tilt capability• 15-foot straight cord with lighter plug• 10 foot pigtail adapter with battery clips• Standard cords allow a range of 25 feet from the vehicle battery

for lighting field service repair areas• Operates on 12 volts• Sealed switch with spot, flood, and off positions• Portable — weighs 4 lbs.• Service Part: 189-3658 Replacement Halogen Flood Sealed Beam

ID: C41230T1


Flashlights and Batteries / Work Lights and Extension Cords

Lighting/Electrical ProductsSh

op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 70

ID: C34487T1

ID: C34486T1

Part No. Length Cord Type Voltage/Watt Std. Color

4C-6477 7.62 m (25 ft) Cord SJTO 18/2 110V/13 Watt Yellow

4C-6478 15.24 m (50 ft) Cord SJTO 18/2 110V/13 Watt YellowVapor Clamps and Mag Mount

4C-6479 12.19 m (40 ft) Reel SJT 18/2 110V/13 Watt YellowVapor Clamps and Mag Mount

9U-7203 9.5 m (30 ft) Cord SJTOW-A 18/2 12V/13 Watt YellowLighter Plug

Service Parts for 9U-7203


9U-6712 Replacement Lamp, 12V, 13 Watt

9U-6708 Clear Outer Tube

9U-6709 Switch Assembly

Accessories for Light Assemblies

9U-6010 Magnetic Mount• Nickel plated magnet has 26.3 kg (58 lb) pull

9U-6011 Vapor Clamp Kit• Consists of 2 large vinyl clamps and 1 small clamp• Kit improves water resistance

9U-6009 Fluorescent Lamp• 110 Volt, 13 Watt fluorescent rough service lamp• Twin tube, cool white light emission

ID: C44285T1

ID: C44293T1

ID: C41469T1


Lighting/Electrical Products Work Lights and Extension CordsShop Supplies

Portable Fluorescent Work LightsWarranty: Manufacturer’s

• 13 Watt fluorescent lamp is equivalent in light output to a 60 Watt incandescent, but four times more efficient and will last up to 10 times longer (10,000 hours)

• Built with the Saf-T-Lite design concept which places light and all electrical components inside a closed chamber for user safety

• Protected on-off switch can be operated by depressing domed end of the light• Entire light double insulated for user safety• Oil resistant power cord , UL listed and meets OSHA standards• Durable and shatter resistant butyrate outer tube gives long life• 4C-6478 and 4C-6479 include magnetic mounts and vapor clips

ID: C34488T1

02b.qxp 10/5/06 1:27 PM Page 71

ID: C79855T1

ID: C79854T1

ID: C79853T1

ID: C54473T1

9U-6710 Fluorescent Light KitWarranty: Manufacturer’s

• 110V kit which inludes 13 Watt lamp, outer tube, switch assembly and installation instructions• Install onto any Saf-T-Lite reel or cordset which was originally equipped with a 110V/13 Watt

“Stubby” light head, such as 4C-6477, 4C-6478 or 4C-6479

Replacement Parts


9U-6009 Fluorescent Lamp, 110V/13 Watt

9U-6708 Clear Outer Tube

9U-6709 Switch Assembly

9U-6711 Ballast

9U-6714 Ballast Box Kit

179-7043 Ratchet LightWarranty: Manufacturer’s

• 120 Volt/60 Hz light made from yellow, unbreakable aerospace plastic with a 10 amp tool-tap-plug

• 10,000 hour life, 13 Watt rough-service fluorescent bulb delivers output of a 60 Watt incandescent bulb

• Cord is 7.62 m (25 ft) long, made from 16/3 wire• STOW type cord — used for heavy duty service and with oil-resistant, thermoplastic jacket,

is weather resistant for outdoor use• Two year warranty on workmanship and material defects (not including bulb)• 179-7044 Bulb and 179-7045 Lens also sold separately• Handy magnetic base so you can position the light where you need it• UL Approved

179-7046 Angle Light ReelWarranty: Manufacturer’s

• 120 Volt/60 Hz light (yellow) includes shatter/scratch resistant lens, 10 amp tool-tap-plug, and velcro magnet• 10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb• Black reel made from shatter resistant ABS plastic• Cord is 15.2 m (50 ft) long, made from 16/3 wire• STOW type cord — used for heavy duty service and with oil-resistant, thermoplastic jacket,

is weather resistant for outdoor use• Two year warranty on workmanship and material defects (not including bulb)• 179-7048 Lens, 179-7049 Bulb, and 179-7050 Velcro Magnet also sold separately• UL Approved

179-7047 Angle LightWarranty: Manufacturer’s

• 120 Volt/60 Hz light includes shatter/scratch resistant lens, 10 amp tool-tap-plug, and velcro magnet• 10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb• Yellow case is made from unbreakable aerospace plastic• Cord is 7.62 m (25 ft) long, made from 16/3 wire• STOW type cord — Used for heavy duty service and with oil-resistant, thermoplastic jacket,

is weather resistant for outdoor use• Two year warranty on workmanship and material defects (not including bulb)• 179-7048 Lens, 179-7049 Bulb, and 179-7050 Velcro Magnet also sold separately• UL Approved


Work Lights and Extension Cords Lighting/Electrical ProductsSh

op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 72

ID: C79858T1

ID: C79857T1

ID: C79856T1

179-7053 Triple-Tap Extension CordWarranty: Manufacturer’s

• 120 Volt/60 Hz reel extension cord is 15.2 m (50 ft) long, made from 16/3 wire with a built-in 10 amp circuit breaker

• Case is made from shatter resistant ABS plastic• Two year warranty on workmanship and material defects• UL Approved

179-7054 Light RoverWarranty: Manufacturer’s

• 120 Volt/60 Hz light has large, shock-absorbent, easy-grip end caps and a scratch/shatter resistant lens• 10,000 hour life, 13 Watt rough service fluorescent bulb delivers output of a 60 Watt incandescent bulb• Unique plug base converts any extension cord into a light• Two year warranty on workmanship and material defects (not including bulb)• 179-7049 Bulb and 179-7055 Tube Assembly also sold separately• UL Approved

179-7056 Work LightWarranty: Manufacturer’s

• 120 Volt/60 Hz light includes large, shock-absorbent, easy-grip end caps, and a scratch/shatter resistant lens• 15 Watt rough service fluorescent bulb delivers output of an 80 Watt incandescent bulb• Cord is 7.62 m (25 ft) long, made from 18/2 wire• STOW type cord — Used for heavy duty service and with oil-resistant, thermoplastic jacket,

is weather resistant for outdoor use• Two year warranty on workmanship and material defects (not including bulb)• 179-7057 Lens and 179-7058 Bulb also sold separately• UL Approved


Lighting/Electrical Products Work Lights and Extension CordsShop Supplies

02b.qxp 10/5/06 1:27 PM Page 73

ID: C79360T1

1

2

Electrical Cord Definitions

Abbreviations

U.L. Underwriters LaboratoriesC.U.L. Canadian Underwriters LaboratoriesO.S.H.A. Office of Safety and Health AdministrationNEMA National Electrical Manufacturers Association

Cord Designation by Letter

“S” Hard surface, flexible cord, general use“J” 300 Volt cord or smaller“E” Elastic synthetic rubber, good low temp cord

“W” Watertight cord“O” Oil resistant

“A” Low-temperature rated“T” Thermo-grade plastic

Heavy-duty Contractor and Industrial Application Extension Cords

• Designed for heavy-duty use by contractors and industrial applications• Outer jacket protects against rough handling and extreme weather conditions• Provides superior resistance to sunlight, ozone, cracking, oils chemicals, and moisture• All cords have CAT logo printed on cord• All extension cords are UL (Underwriters Laboratory) listed and meet OSHA

(Office of Safety and Health Administration) requirements• All plugs and outlets are NEMA (National Electrical Manufacturers Association)

designated — 5-15P plug and 5-15R outlet

Wire Voltage Operating Item Part No. Length Material Outlet size Rating rating temperature

1 241-8522 25 ft all-weather vinyl single 12 gauge, SJTOW 300 volts -35 to 60°C241-8529 50 ft 3 conductor (-31 to 140°F)241-8530 100 ft

2 243-1874 25 ft all-weather vinyl triple 12 gauge, SJTOW 300 volts -35 to 60°C243-1875 50 ft 3 conductor (-31 to 140°F)243-1876 100 ft

2 243-1877 25 ft all-weather vinyl triple 10 gauge, SJTOW 300 volts -35 to 60°C243-1878 50 ft 3 conductor (-31 to 140°F)243-1879 100 ft

1 (S) Hard Surface, Flexible Cord, General Use; (J) 300 Volt cord or smaller; (E) Elastic Synthetic Rubber, Good Low Temperature Cord; (W) Watertight Cord; (O) Oil Resistant; (A) Low Temperature Rated; (T) Thermo Grade Plastic


Work Lights and Extension Cords Lighting/Electrical ProductsSh

op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 74

ID: C66956T1

9U-6370 9U-6371 9U-6372 9U-6373

Turnlock Plugs and Connectors (15-20 Amp)

Turnlock Plugs and Connectors (15-20 Amp)

Part No. Type Description

9U-6370 15 Amp, 125V AC Heavy-Duty Connector 2 Pole, 3 Wire, Grounded NEMA L5-15

9U-6371 15 Amp, 125V AC Heavy-Duty Plug 2 Pole, 3 Wire, Grounded NEMA L5-15

9U-6372 20 Amp, 250V AC Heavy-Duty Connector 2 Pole, 3 Wire, Grounded NEMA L5-20

9U-6373 20 Amp, 250V AC Heavy-Duty Plug 2 Pole, 3 Wire, Grounded NEMA L5-20

ID: C55023T1

Heavy-Duty Connectors and Plugs (20-30 Amps) with Insulating Cord Grip

Part No. Type Description Cord Diameter

9U-6374 20 Amp, 125/250V Connector Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)

9U-6375 20 Amp, 125/250V Plug Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)

9U-6376 20 Amp, 250V Connector Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)

9U-6377 20 Amp, 250V Plug Yellow High Impact, with Insulating Cord Grip 14.27 - 26.97 mm (.562 in - 1.062 in)






Lighting/Electrical Products Work Lights and Extension Cords Shop Supplies

Plugs and ConnectorsWarranty: Manufacturer’s

• For use in construction sites, industrial, dusty, and damp environments• For use with tools, motors, grinding machines, high pressure washers, outdoor lighting• UL and CSA listed

ID: C66955T1

9U-6362 9U-6363 9U-6364 9U-6365

9U-6366 9U-6367 9U-6368 9U-6369

Straight Blade Plugs and Connectors (15-20 Amp)

Straight Blade Plugs and Connectors (15-20 Amp)

Part No. Type Description

9U-6362 15 Amp, 125V AC Connector 2 Pole, 3 Wire, NEMA 5-15P

9U-6363 15 Amp, 125V AC Plug 2 Pole, 3 Wire, NEMA 5-15P







02b.qxp 10/5/06 1:27 PM Page 75

ID: C34420T1

Crimping Tools

• For insulated and uninsulated ferrules

ID: D01573T1

Part No. Wire Gauge

139-2788 24-12 AWG

139-2789 10-6 AWG

Heat Shrinking Tubing

• Made from polyolefin• Effectively resists abrasion, scoring, cut-through, and the effects of long term aging• Easy to install• Use on inline electrical splices to provide mechanical protection as well as corrosion and moisture seal

Part No. Expanded I.D. Recovered I.D. Recovered Length Pkg Qty.

4C-6387 10 mm (.400 in) 3.8 mm (.150 in) 152 mm (6 in) 25

4C-6388 20 mm (.800 in) 5.0 mm (.200 in) 152 mm (6 in) 5

4C-6389 28 mm (1.10) 9.4 mm (.370 in) 229 mm (9 in) 5

4C-6390 388 mm (1.50 in) 12.7 mm (.470 in) 229 mm (9 in) 5

4C-6391 51 mm (2.00 in) 16.5 mm (.650 in) 229 mm (9 in) 1


Miscellaneous Lighting/Electrical ProductsSh

op S

uppl

ies

Miscellaneous

4C-6393 Rubber Splicing Compound

• Linerless rubber tape, 19 mm (3⁄4 in) wide X .8 mm (.030 in) thick X 4.6 m (15 ft) long rolls• Use for insulating and sealing on electrical cable installation and repair• 1 roll per package

ID: C34419T1

6V-7939 Wire Marker Tape Dispenser

• Provides a fast, convenient system for marking wire or cable• Helps eliminate errors in the disassembly and assembly

of hydraulic lines, wiring harness, generator sets and panels• Ten refillable compartments with numbers from 0 to 9 let

you choose the exact number/letter combinations needed• Easy to use, easy to carry; convenient rolls —

easy cutoff, no waste• Tapes are an epoxy film with an acrylic adhesive• Highly resistant to oils and solvents

ID: C34414T1

Marker Tape Replacement Rolls (10 rolls per box)


8T-5209 Tape No. 0

8T-5211 Tape No. 1

8T-5212 Tape No. 2

8T-5213 Tape No. 3

8T-5214 Tape No. 4

8T-5215 Tape No. 5

8T-5216 Tape No. 6

8T-5217 Tape No. 7

8T-5218 Tape No. 8

8T-5219 Tape No. 9

02b.qxp 10/5/06 1:27 PM Page 76

Cold Shrink Insulators

• Rubber insulators can be used on cable to insulate as well as to protect from moisture and corrosion while remaining flexible

• Resists fungus, acids and alkalies, ozone and ultra-violet light• Easy to install (no flame/torch needed) — unwind the expander core by pulling

the insulator and tubing will shrink to cable diameter• When shrunk, connection is water resistant• Very portable since no heat source is required

Application Procedure1. Slip correct size cold shrink insulator over cable to be spliced.

2. Splice the cable.

3. Unwind the expander core by pulling the insulator over the splice and center.

4. Pull expander core from the cold shrink tubing. Insulator will seal splice.

ID: C44101T1

147-6456 Wedge Removal Tool

• Use to remove wedges from DT series Deutsch connectors


Lighting/Electrical Products MiscellaneousShop Supplies

Heat Shrinking Butt Connector

• One piece, pre-insulated• Use on inline electrical splice where moisture and corrosion are a concern• Easy application

Application Procedure1. Strip wires to appropriate length.

2. Insert wire into terminal and crimp using 9S-9150 Terminal Crimp Tool.

3. Apply heat with recommended heat source — 9U-6070, 9U-6072 Heat Guns.

ID: D01341T1

Barrel PkgPart No. Wire L I.D. Color Qty.

4C-6394 #22 to 18 AWG .28 .062 Red 100

4C-6395 #16 to 14 AWG .30 .095 Blue 100

4C-6396 #12 to 10 AWG .38 .142 Yellow 100

ID: C41518T1

SeamlessButt Connector

L

Relaxed Pkg.Part No. Diameter Min. Tube Max. Length Qty.

4C-6382 2.54 mm (.10 in) 21.65 mm (.82 in) 203 mm (8 in) 1

4C-6383 10.56 mm (.40 in) 21.65 mm (.82 in) 203 mm (8 in) 1

4C-6384 12.95 mm (.51 in) 25.4 mm (1.00 in) 229.0 mm (9 in) 1

4C-6385 17.53 mm (.69 in) 33.0 mm (1.30 in) 304.8 mm (12 in) 1

4C-6386 24.13 mm (.95 in) 48.26 mm (1.90 in) 304.8 mm (12 in) 1

02b.qxp 10/5/06 1:27 PM Page 77

First Aid

First Aid KitsSMCS Code: 0000Model: All

• Small, portable kits for service trucks, tool boxes, or for personal use in family home, car, camper, or boat• Soft shell case made of water resistant nylon• Uses “Book Style” construction with zippered internal compartments (makes it easy to access items)

ID: C78540T1

150-1578 First Aid Kit

Description Size Quantity

Water resistant nylon container 190.5 x 38.1 x 107.95 mm (7.5 x 1 .5 x 4.25 in) 1

Scissors 102 mm (4.0 in) 1

Tweezers 76.2 mm (3 in) 1

First aid booklet — 1

Bandaids 19.05 x 76.2 mm (.75 x 3 in) 20

Alcohol swabs — 4

Wet wipes — 4

Sting stop swabs — 2

Antiseptic swabs — 12

Adhesive tape 2.3 m x 12.7 mm (2.50 yd x .5 in) 1

Sterile gauze pads 50.8 x 50.8 mm (2 x 2 in) 4


Sterile abdominal pad 127 x 228.6 mm (5 x 9 in) 1

Sterile pressure bandage 50.8 mm (2 in) 1

Conform gauze roll 4.57 m x 50.8 mm (5 yd x 2 in) 1

Triangular bandage — 1

Safety pins — 6

Vinyl gloves — 1 pair

Acetaminophen — 1 (2 per pack)

ID: C78544T1 150-1579 Contents

Description Size Quantity

Water resistant nylon container 228.6 x 76.2 x 127 mm (9 x 3 x 5 in) 1

Scissors 152.4 mm (6 in) 1

Stainless steel splinter forceps 114 mm (4.5 in) 1

First aid booklet — 1

Cloth bandaids 22.2 x 76.2 mm (.87 x 3 in) 10

Finger tip bandaids — 5

Knuckle bandaids — 5

Alcohol swabs — 18

Wet wipes — 6

Sting stop swabs — 6

Antiseptic swabs — 16

Adhesive tape 4.6 m x 12.7 mm (5 yd x 1 in) 1



Sterile abdominal pad 127 x 228.6 mm (5 x 9 in) 2

Sterile pressure bandage 101.6 mm (4 in) 1

Conform gauze roll 4.57 m x 50.8 mm (5 yd x 2 in) 2

Triangular bandage — 1

Safety pins — 6

Vinyl gloves — 1 pair

Multi-purpose pad 431.8 x 609.6 mm (17 x 24 in) 1

Tensor bandage 50.8 mm (2 in) 1

Instant cold pack (in box) 101.6 x 152.4 mm (4 x 6 in) 1

Emergency mylar blanket — 1


First Aid Personal/SafetySh

op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 78

First Aid Kits, 25 and 50-person

• Kits for your safety and first aid requirements• Comply with OSHA 1910.151 for industry, and OSHA 1926.50 for construction• 163-0798 contains supplies for 25 people; 163-0799 contains supplies for 50 people

163-0798 163-0799Contents 25-person 50-person

Adhesive Strips, 3⁄4 in x 3 in 50 100

Adhesive Tape Roll, 1⁄2 in x 5 yd 1 1

Alcohol Wipes 10 20

Ammonia Inhalants 3 3

Instant Cold Pack 1 1

Combine Pad, 5 in x 9 in 1 1

Sterile Cotton, 1⁄2 oz roll 1 1

Disposable Gloves 1 pr 2 pr

Eye Irrigate Solution, 1 oz bottle 1 1

Eye Pads, oval, 1.75 in x 2.5 in 2 4

Gauze Pads, 4 in 2 4

Gauze Pads, 3 in 4 8

First Aid Cream, 7⁄8 oz 1 2

Sting Relief Pads 3 3

Triangular Bandage 1 1

Gauze Bandage, 2 in x 5 yd 2 2

Gauze Bandage, 4 in x 5 yd — 1

Elastic Bandage, 2 in — 1

Scissors 1 1

Tweezers 1 1

4C-9619 First Aid BlanketWarranty: Manufacturer’s

• Flame retardant, durable 90% wool, 10% nylon, gray blanket• Dimensions: 157 cm x 203 cm (62 in x 80 in)• Fluorescent, Rocket Red pouch with built-in carrying handle• Made of nylon, vinyl-coated on both sides• A must in case of emergency

ID: C44240T1


Personal/Safety First AidShop Supplies

02b.qxp 10/5/06 1:27 PM Page 79

ID: D00262T1ID: D00250T1

Disposable Plugs

European Union Compliant, CE marked• Bell-shaped polyurethane foam for maximum comfort• Smooth soil-resistant skin• Noise reduction rating: 33dB• Color: neon

ID: D01161T1


260-4783 Uncorded Disposable Plugs 200 per box/10 boxes per case

260-4785 Corded Disposable Plugs 100 per box/10 boxes per case

237-8092 Corded Disposable Foam Plugs

European Union Compliant, CE marked• Tapered disposable plug for excellent fit• Light comfortable foam• Smooth surface to repel dirt• Corded for long wear

and cost savings• Excellent protection at NRR29• Package quantity: 1

Rad Band and Replacement Plugs

European Union Compliant, CE marked• High-density construction, lightweight and durable• Non-toxic FDA approved material earplugs• Comfortable and cool on hot days• Noise reduction rating: 23 dB• Engineered angled earplug for

maximum sound protection and comfort• Package quantity: 1


233-8585 Rad Band

233-8586 Replacement Plugs


Personal Protection Items Personal/SafetySh

op S

uppl

ies

Personal Protection Items

239-1090 Disposable Foam Plugs

European Union Compliant, CE marked• Tapered disposable plug for excellent fit• Light comfortable foam• Smooth surface to repel dirt• Excellent protection at NRR29• Package quantity: 1

ID: D00238T1

239-1089 Reusable Uncorded Plugs

European Union Compliant, CE marked• Super-soft washable reusable plugs• Flip-top case included• Non-toxic FDA-approved material• Excellent protection at NRR28• Package quantity: 1

ID: D00244T1

02b.qxp 10/5/06 1:27 PM Page 80

ID: C80266T1

ID: C80272T1

ID: D00184T1ID: C80270T1

4C-6581 Ear Muffs

European Union Compliant, CE marked• Hard hat-mounted ear muffs feature large, lightweight ear cups that attach

to a variety of hard hats for convenience• Recommended for moderately high noise situations (up to 95 dBA TWA)• Noise reduction rating: 23 dB• Package quantity: 2 pair muffs

239-1088 Multipositional Ear Muff

European Union Compliant, CE marked• Adjustable steel headband• Foam filled ear cushions with a soft breathable surface• NRR at various postions:

NRR26 over-the-headNRR26 behind-the-headNRR23 under-the-chin

• Package quantity: 1

193-0766 Particulate Respirator193-0071 Particulate Respirator

• Replaces 4C-8761 Dust/Mist Respirator• 193-0766 and 193-0071 meet NOISH 42 CFR 84 N95 requirements. TC-84A2668 and TC-84A2669• Three-panel respirator with innovative design allows better visibility and conforms

to a wide range of face sizes• Soft cover web on inner panel is comfortable against face and helps provide

a custom fit and secure seal• Individually packaged to help prevent contamination• 193-0071 features the Cool Flow™ exhalation valve

for easy exhalation and cool dry comfort• Suggested applications: grinding, sanding, sweeping,

bagging, general maintenance, dusty operations and operations involving liquid or non-oil based particle from sprays that do not emit harmful vapors

• Quantity: 193-0766 (20 respirators per box); 193-0071 (10 respirators per box)


Personal/Safety Personal Protection ItemsShop Supplies

233-8588 Performance Kit


ID: D00268T1

Consists of

Package Part No. Description Quantity

233-8580 Glasses 1

233-8587 Ear Muffs 1

233-8587 Silencer Ear Muffs

European Union Compliant, CE marked• Comfortable adjustable padded headband• Soft foam padded earcups—comfortable when wearing with glasses• Rugged and lightweight• Dielectric• Excellent protection at NRR26

ID: D00256T1

02b.qxp 10/5/06 1:27 PM Page 81

235-6479 Half Facepiece Respirator

• Swept-back design of the filters/cartridges improves balance and visibility• Reusable — just dispose of the cartridge/filters when used to capacity• Comfortable, lightweight facepiece and easy-to-adjust head straps• Size: medium• Package quantity: 6 respirators• Filter not included

Replacement Filters236-6598 Organic Vapor Cartridge• Provides respiratory protection from certain organic vapors at concentrations

up to 10 times the Permissible Exposure Limit (PEL) with half facepieces• Package quantity: ten 2-packs of filters

295-2853 Polypropylene Respirator Cartridge, 41⁄2 inch diameter• NIOSH approved P100 filter, 99.97% efficient• Protects against solid and liquid particulates that may contain oil• Easy-breathing, low-resistance, no other holders required• Off-center adapters for optimal peripheral vision• Package quantity: ten filters

236-6597 P100 High Efficiency Filter• For applications including welding, brazing, torch cutting, pouring and soldering,

as well as protection against OSHA substance-specific particle exposures such as lead, asbestos, cadmium, arsenic and MDA

• Package quantity: ten 2-packs of filters

ID: D00282T1

ID: D01567T1

237-5181 Welding Respirator

• Meets NOISH 42 CFR 84 N95 requirements. TC-84A0454• Cool flow exhalation valve promotes worker comfort by offering easy exhalation for cooler, dry comfort• Contours easily to provide a comfortable, good seal• Economical all-filter design with no spare parts to clean• Suggested applications: welding, brazing, soldering, torch cutting, metal pouring, grinding,

sanding, sweeping, bagging, general maintenance and operations involving liquid or non-oil based particle from sprays that do not emit harmful vapors

• Quantity: 10 respirators per box ID: C80261T1



op S

uppl

ies

ID: D01209T1

262-4866 High Filtration Dust Mask

• Adjustable metal nose bridge, single strap, and contour-fit design to ensure best coverage

• Lightweight and disposable• Non-irritating to the skin• Not NIOSH approved• Material: polyester• Quantity: 50 per box

1U-8097 Welding Helmet

• 51 mm x 108 mm (2 in x 41⁄4 in), “shade 10” lens• Ratcheting headgear adjusts to fit any head size• Nylon material is lightweight and durable

ID: C34434T1

02b.qxp 10/5/06 1:27 PM Page 82

ID: C41322T1

1U-8100 Welding Helmet

• Features a shade 10 lens but in a larger size — 114 mm x 133 mm (41⁄2 in x 51⁄4 in)• Has ratcheting head gear• Made of sturdy nylon material

ID: C44003T1

Replacement Lens for 1U-8097 and 1U-8100 Welding Helmets

LensPart No. Type Use For:

1U-8098 Shade 5 Tinted Glass1 1U-8097



1U-8099 Plastic Cover Plates3 1U-8097

1U-8102 Plastic Cover Plates3 1U-81001 Shade 5 lens used for medium to heavy gas torch cutting [25 mm (1 in)

and up] and light to medium gas torch welding [up to 13 mm (1⁄2 in)]2 Shade 10 lens used for welding with manual weld electrodes3 Two needed, one inside and one outside of your tinted glass lens

1U-8103 Welding Goggles

• Feature a shade 5 lens, good ventilation, and a light-tight fit

ID: C44001T1

1U-8104 Welding Goggles with Lift Front Lens

• Feature the shade 5 lens with a hinged front-lift door

1U-8105 Eye Cup Welding Goggles

• Shade 5 lens eye goggles that conform to eye area assuring tight and safe seal• Feature anti-fog ventilation

ID: C41321T1

Replacement Lens for 1U-8105 Eye Cup Welding Goggles


1U-8106 Shade 5 tinted replacement lens1

1U-8107 Clear replacement lens1 Shade 5 lens used for medium to heavy gas torch

cutting [25 mm (1 in) and up] and light to medium gas torch welding [up to 13 mm (1⁄2 in)]

Welding Jacket

• Made of flame resistant, sturdy 269 g (9 oz) sateen fabric treated for permanent fire retardant• Finished in a dark green color• Lightweight and provides excellent protection from flash, flame, and sparks• Black no-glare snaps• Adjustable snaps at the cuff• Roll collar can be turned up• Flame retardant good up to 50 washes in mild soap



ID: C41311T1


1U-6586 Welding Jacket Large

1U-6587 Welding Jacket Extra Large

02b.qxp 10/5/06 1:27 PM Page 83

185-0153 Leather Welding Gloves

European Union Compliant, CE marked• Chrome tanned, split leather glove with Cat logo• Premium glove for an economical price• Gunn pattern with a straight thumb• Comfortable full semi-sock, flame retardant lining• One-piece back• Welted thumb and forefinger for extra life• One size: large

ID: C41312T1

185-0151 Welding Coat (Large)185-0152 Welding Coat (Extra Large)

European Union Compliant, CE marked• 30 inch leather jacket with raglan shoulder design for utmost mobility• Double stitched seams with 5 ply Kevlar thread provide superior strength• Multiple position snap adjustment provides maximum protection and comfort• Roll-up collar with three-snap adjustment• Locker handling loop, soap stone shoulder pocket, and inner leather pocket

Part No. Description Chest Size

185-0151 Welding Coat (Large) 44 inch to 46 inch

185-0152 Welding Coat (Extra Large) 48 inch to 50 inch ID: C41308T1

185-0143 Cape (Large)185-0144 Cape (Extra Large)185-0150 Bib

European Union Compliant, CE marked• Leather cape with raglan shoulder sleeves for mobility• Double stiched seams with 5 ply Kevlar thread• Roll-up collar with three snap adjustment• Includes locker hanging loop and soap stone shoulder pocket• Bib is cut extra wide — 22 inches wide x 20 inches long

ID: C41307T1

Welding BlanketWarranty: Manufacturer’s

• Made of a fiberglass textile material• Light gold neoprene coating on one side to reduce fraying• Hemmed and seamed with Kevlar thread• Retains heat• Protects welding area



op S

uppl

ies

ID: C44239T1

Part No. Description Dimensions

4C-9616 Blanket 183 cm x 183 cm (6 ft x 6 ft)



02b.qxp 10/5/06 1:27 PM Page 84

ID: D00190T1

ID: C41217T1

239-1085 Wraparound Safety Glasses

European Union Compliant, CE marked• Visitor disposable safety glasses• Can be worn over prescription glasses• 99.9% UVA and UVB protection• Meets or exceeds all ANSI, CSA, and CE specifications• Package quantity: 1

ID: D00274T1

Safety Glasses

European Union Compliant, CE marked• Polycarbonate lens• Universal bridge, plastic frame• Meet ANSI Z87.1-1979

Pkg. Lens Frame Lens Part No. Qty. Type Color Size Features

4C-8093 10 Clear Mocha 54 Eyebrow and sideshield

4C-4120 10 Clear Mocha 58 Eyebrow and sideshield

4C-8351 10 Gray Mocha 58 Eyebrow and sideshield

Safety Glasses

European Union Compliant, CE marked• Sporty wraparound look• Soft non-slip rubber nosepiece• Adjustable temple length• Full UVA and UVB protection• Meets or exceeds all ANSI, CSA, and CE specifications• Package quantity: 1

LensPart No. Type

233-8576 Clear (packaged for retail)

233-8577 Clear

233-8578 Gray (packaged for retail)

233-8579 Gray

Safety Glasses

European Union Compliant, CE marked• 5-position ratchet and 4-position telescoping temples• Soft non-slip rubber nosepiece• Anti-scratch hard-coated lenses• 99.9% UVA and UVB protection• Ventilation between lens and frame• Meets or exceeds all ANSI, CSA, and CE specifications• Package quantity: 1

ID: D00280T1



Part No. Lens Type

233-8580 Gray (packaged for retail)

249-7265 Clear (packaged for industrial; 12 per package)

02b.qxp 10/5/06 1:27 PM Page 85

Safety Glasses

European Union Compliant, CE marked• 5-position ratchet and 4-position telescoping temples• Stylish one-piece lens with shields• Hard-coated lenses• 99.9% UVA and UVB protection• Meets or exceeds all ANSI, CSA,

and CE specifications• Package quantity: 1

ID: D00286T1

LensPart No. Type Frame

239-1079 Clear Black

239-1082 Clear Yellow/black

239-1083 Gray Black

239-1084 Gray Yellow/black

233-8581 Blue Mirror-black

233-8582 Blue Mirror-yellow/black

Aviator-Style Safety Glasses

• Popular aviator-style frames with clear or gray tinted polycarbonate lenses and side shields• Fold-flat frame design has 58 mm (2.3 in) lens size and 150 mm (6 in) temple length• Nose pad is adjustable and constructed of soft, pliable PVC• Side shields are permanently attached• Temples are made of brass alloy for easy adjustment• Impact resistant lenses meet ANSI Z87.1-1989• Package quantity: 1 pair

ID: D00673T1

Part No. Frame Color Lens Tint

262-4864 Black Gray

263-0858 Gold Clear

263-0868 Black Clear

263-0866 Zircon-Style Safety Glasses

• Zircon-style safety glasses feature a contoured impact resistant polycarbonate lens• Dark green tinted lens absorbs 99% of harmful UV rays• Meets ANSI Z87.1-2003 impact standards• Package quantity: 1 pair

ID: D01611T1



op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 86

ID: C79647T1

Uvex Astrospec 3000™ Safety Glasses

European Union Compliant, CE marked• Contemporary styling; frames have CAT® logo on temple• Fully adjustable — patented lens inclination and adjustable

temple length provide ultimate comfort• Comes with impact resistant polycarbonate lenses

- anti-fog (improves visibility in humid work areas)- anti-static (minimizes attraction of small dustand dirt particles)- anti-scratch (increases scratch resistanceand extends lens life)- anti-UV coating (absorbs 99.9% of harmful UV light)

• Replacement lenses available• Meet industry standards:

ANSI Z87.1 - 1989CSA Z94.3 - 1992Model 3000 with clear or gray lens also CE Certified

• Made in USA• Clear tint for indoor applications; gray and mirror gray tint

for outdoor applications where sunlight and glare cause eye strain• Universal nose bridge

Part No. Frame Color Lens Tint

139-2645 Black Clear

139-2648 Black Gray

139-2650 Yellow/Black Mirror Gray

139-2651 Black Mirror GrayReplacement Lens

Part No. Lens Tint

139-2670 Clear

139-2671 Gray

139-2672 Mirror Gray

NOTE: Mirror gray lens coated for scratch resistance only.

262-4865 Flip-Up Protective Eyewear

• Classic flip-up style offers versatility for workers in unique environments• Welding shade: 5.0 (for gas welding and brazing)• Clear impact resistant polycarbonate lenses in safety glasses meets ANSI Z87.1-1989• Opaque black frame with molded in-brow guard• Sideshields for extra protection against flying particles• Lens have a scratch resistant hard coat for longer life• Package quantity: 1 pair

ID: D00619T1

ID: D00667T1



262-4861 Universal Clip-0n Safety Shields

• Provide optimal lateral coverage on medium to large frames with lens measuring 42 to 51 mm (1.65 to 2 in) in height• Semicircle configuration provides enhanced coverage that shields eye from impact and airborne foreign bodies• Patented design allows simple attachment or removal without tools in less than one minute• Easily replaces most original equipment side shields• Each universal side shield dispensing unit contains 20 pair of side shields and 20 care

and mounting instructions to assist and inform first time users• Dispensing units can be placed at strategic locations for convenience of employees or visitors• Made from molded high-impact polycarbonate• OSHA compliant and meets ANSI Z87.1-2003• UV shield barrier protects against harmful UV radiation• Package quantity: 20 pair

02b.qxp 10/5/06 1:27 PM Page 87

ID: D01257T1ID: D01407T1

233-8584 Safety Goggles

European Union Compliant, CE marked• Provides excellent ventilation and indirect protection• Fits over most prescription eyeware• Clear optical-grade polycarbonate lens• Adjustable headband• Meets or exceeds all ANSI, CSA, and CE specifications• Package quantity: 1

ID: D00196T1

233-8583 Safety Goggles

European Union Compliant, CE marked• Perforated goggle with excellent ventilation and protection• Fits over most prescription eyeware• Clear optical-grade polycarbonate lens• Adjustable headband• Meets or exceeds all ANSI, CSA, and CE specifications• Package quantity: 1

ID: D00292T1

263-0867 All-purpose Wipers

• Cleaning tissues for safety glasses• Pop-up style box • Size: 127 mm x 203 mm (5 in x 8 in) wipers• Quantity: 300 tissues per box,

60 boxes per case

239-1086 Lens Cleaning Towelettes

European Union Compliant, CE marked• Excellent disposable moisterized towels

for lens cleaning• Can be used on plastic, glass and polycarbonate

lenses, face shields, and goggles• Towelettes are pre-moistened with anti-fog,

anti-static formula• Individually foil wrapped towelettes are

great for service trucks and tool boxes• Dispenser features pull out bottom for easy

dispensing and built in tab for hanging• Each dispenser contains (100)

127 mm x 203 mm (5 in x 8 in) towelettes

239-1087 Lens Cleaning Station

European Union Compliant, CE marked• May be used on safety glasses, face shields, goggles, and full face respirators• Economical lens cleaning station provide lens cleaning needs in shop or office• Promotes proper lens cleaning, extending life of safety glasses• Specially formulated solution cleans greasy and oily glasses while providing an anti-fog/anti-static coating• Low lint non-abrasive tissues leave lenses clear and streak free• Easily mounted on wall or table top• Each station contains 8 oz. anti-fog/anti-static solution and 600 low lint, non-abrasive tissues



op S

uppl

ies

ID: D01263T1

02b.qxp 10/5/06 1:27 PM Page 88

ID: C41219T1

Hard HatsWarranty: Manufacturer’s

European Union Compliant, CE marked• Replaces canceled 173-1941 Protective Hard Hat, White and 173-1942 Protective Hard Hat, Yellow• High density, polyethylene protective hard hats with Cat logo• Self-sizing, four-point suspension with brow pad• Rain trough brim provides extra protection against snow, rain, dust, and dirt• Accessory slots provide attachment points for earmuffs, face shields, flashlights, etc• 239-4964 and 239-4966 meets or exceeds ANSI Z89.1-1997 Standard for Industrial Head Protection,

Type 1, Class E, helmet requirements• 239-4965 and 239-4967 meets or exceeds EN 397:1995 Amendment (A1 2000 Standard)

for Industrial Safety Helmets, Optional Classes -20 degrees C, 440 VAC requirements ID: D00385T1


239-4964 Hard Hat, White U.S. Version (ANSI standard)

239-4965 Hard Hat, White European Version (EN standard)

239-4966 Hard Hat, Yellow U.S. Version (ANSI standard)

239-4967 Hard Hat, Yellow European Version (EN standard)

1U-8091 Hard Hat Winter Liner

European Union Compliant, CE marked• Wear with 239-4964, 239-4965, 239-4966, and 239-4967 Hard Hats• Dark blue cotton twill with fleece lining• Comes with a Velcro chin strap fastener• Will work with other similar hard hats

ID: C44021T1

4C-8095 Heavy-Duty Headgear

European Union Compliant, CE marked• Headgear has precision ratchet head size adjustment for a comfortable snug fit• Floating window suspension distributes weight and reduces shock of impact• Five position pinlock crown band provides additional adjustment for proper support and a firm fit• Crown protector made of a new high-performance thermoplastic offers excellent impact resistance

over a wide range of temperatures• Soft vinyl headband to cushion the forehead• Packaged individually

Accessories for 4C-80954C-8096 Window — Clear Polycarbonate

4C-8097 Window — Dark Green for Glare Reduction

Note: Headgear and windows must be ordered separately.

4C-8096 and 4C-8097 Features• 229 mm x 210 mm x 2.0 mm (9 in x 141⁄2 in x 0.080 in) thickness• Polycarbonate for heavy-duty impact protection against flying particles• Good heat resistance• Provide excellent general face and eye protection• Windows can be replaced in seconds• Windows mount inside crown protector for greater splash protection• Spring loaded pivot assemblies maintain proper friction and prevent annoying window drop• Blue color and matte finish resist smudges and show less daily grime• Packaged in quantities of 10 ID: C41220T1



02b.qxp 10/5/06 1:27 PM Page 89

212-7530 Hard Hat Attachment BracketWarranty: Manufacturer’s

• Turns an ordinary hard hat into a face shield• Fits most makes and models of hard hat• Bracket attaches directly to hard hat (hard hat not included)• Uses a 249-0661 Clear Acetate Visor or 258-2357 Green Acetate Visor (not included)

ID: C80586T1

1U-8095 Face Shield

• Clear 203 mm x 305 mm x 1 mm (8 in x 12 in x .040 in) window• Comfortable and durable• Provide excellent general face and eye protection

ID: C41220T1

Replacement Windows for 1U-8095 Face Shield (Also fit Glendale 5000, Huntsman K, K3, K4 and K10,

Norton 6300 and Jackson J-10 face shields)


1U-8096 Clear replacement window

4C-4404 Green replacement window

Safety Vests

262-9301 Lime Green Mesh Safety Vest• Non-reflective, lime green color• Single front hook and loop closure with black cloth binding• One size fits all• Material: 100% polyester mesh• Conforms to OSHA standards

262-9176 Orange Mesh Safety Vest• Non-reflective, dayglow orange color• Single front hook and loop closure• Elastic side straps —19 mm (.75 in) x 20 cm (8 in)• One size fits all• Material: 100% polyester mesh• Conforms to OSHA standards

ID: D00571T1



op S

uppl

ies

02b.qxp 10/5/06 1:27 PM Page 90

ID: D00790T1

Tyvek Coveralls

• White coveralls with zipper front• For general maintenance work, fiberglass handling, spray painting, and sand blasting• Offers splash protection against many liquids• Lightweight and soft• Strong, whether wet or dry• Resistant to abrasion, tears, and punctures• 100% Polyethylene construction• Unaffected by most chemicals• Blocks out 99.9% of all dry particulate down to 0.5 microns

ID: D00697T1

Part No. Size Qty.

267-8541 Small 1

267-8540 Medium 1

267-8539 Large 1

267-8542 X Large 1

267-8543 XX Large 1

267-8544 XXX Large 1

267-8545 XXXX Large 1

Rain Jackets and Pants

• Made with a 0.35 mm (.014 in) PVC exterior laminated to a polyester interior [PVC is a synthetic thermoplastic elastomer (TPE) which provides excellent ozone and weather resistance]

• Double-lapped heat-welded construction• Non-conductive hardware• Meets California Proposition 65

Rain Jacket• Yellow rain jacket with a detachable hood and two patch pockets• Full snap front• Inner storm fly prevents rain and debris from penetrating front opening• Corduroy collar• Raglan sleeves for maximum mobility (a raglan sleeve is attached to a garment body

at a 45 degree angle helping it to stretch from neckline to underarm)• Take-up snaps at cuff• Back yoke ventilation

Rain Pants• Yellow rain pants with fly front overall and pockets with flaps• Fabric/elastic suspender and elastic waist band• Take-up snaps at ankle

Rain Jacket

Part No. Chest Size

263-0876 Medium, 101.6-106.68 cm (40-42 in)

263-0888 Large, 111.76-116.84 cm (44-46 in)

263-0967 XLarge, 121.92-127 cm (48-50 in)Rain Pants

Part No. Waist Size

263-0875 Medium, 91.44-96.52 cm (36-38 in)

263-0882 Large, 101.6-106.68 cm (40-42 in)

263-0895 XLarge, 111.76-116.84 cm (44-46 in)



02b.qxp 10/5/06 1:27 PM Page 91

Hand Protection — Gloves

Utility GlovesWarranty: Manufacturer’s

• Help protect from heat, cold, nicks, cuts, and bruises• Split-palm design ensures long life in high-wear areas• Hidden seam design eliminates snagging• Tough spandex top material resists snags• Snug, comfort fit assures greater dexterity• NOT flame-proof or fire retardant• Machine washable, air dry (Do NOT machine dry)• 6 pair per package

ID: D01237T1

Part No. Size

276-0491 Medium

276-0492 Large

276-0493 Extra Large

276-0494 XX Large

Impact GlovesWarranty: Manufacturer’s

• Design features improved dexterity and glove life• Compression-molded Airprene knuckle and index finger protection• Seamless index finger for great fingertip control• Streamlined thermal plastic rubber (TPR) hook and loop fastening on cuff• Split palm design puts 1 mm material in all high wear areas• 3 mm gel palm padding reduces vibrations• NOT flame-proof or fire retardant• Machine washable, air dry (do NOT machine dry)• 6 pair per package

ID: D01231T1

Part No. Size

276-0499 Medium

276-0500 Large


276-0502 XX Large

Insulated GlovesWarranty: Manufacturer’s

• Improved thermal protection• Waterproof glove insert to keep hands dry• Unique combination of Velboa and micro fleece layer closest to skin for warmth• Neoprene cuff design with streamlined thermal plastic rubber (TPR) hook and loop fastening• Compression-molded neoprene knuckle and index finger protection• Durable synthetic leather palm• NOT flame-proof or fire retardant• Machine washable, air dry (do NOT machine dry)• 6 pair per package

ID: D01225T1

Part No. Size

276-0495 Medium

276-0496 Large


276-0498 XX Large

Fingerless GlovesWarranty: Manufacturer’s

• Protect hands while having full fingertip access• Palm padding of 3 mm shock-absorbing gel• Hidden seam design eliminates snagging• Tough spandex top material resists snags• Snug, comfort fit assures greater dexterity• NOT flame-proof or fire retardant• Machine washable, air dry (do NOT machine dry)• 6 pair per package


Hand Protection — Gloves Personal/SafetySh

op S

uppl

ies

ID: D01219T1

Part No. Size

276-0487 Medium

276-0488 Large


276-0490 XX Large

02b.qxp 10/5/06 1:27 PM Page 92

ID: D00850T1

ID: D00844T1

ID: D00838T1

ID: D00832T1

Unlined Grain Leather Driver’s Gloves

• For drivers, utility and warehouse workers• Gunn cut pattern• Keystone thumb• Pull-strap closure

Part No. Size Quantity

246-5141 Medium Single pair

246-5143 Large Single pair

246-5145 Extra Large Single pair

246-5142 Medium Bulk - 12 pair

246-5144 Large Bulk - 12 pair

246-5146 Extra Large Bulk - 12 pair

Lined Leather Driver’s Gloves

• For drivers, utility and warehouse workers

• Extra warmth• Elastic shirred back holds

glove securely to hand• Gunn cut pattern


246-5151 Medium Single Pair

246-5149 Large Single Pair

246-5147 Extra Large Single Pair

246-5152 Medium Bulk - 12 Pair

246-5150 Large Bulk - 12 Pair

246-5148 Extra Large Bulk - 12 Pair

Split Leather Driver’s Gloves

• For drivers, utility and warehouse workers; light welding

• Elastic shirred back holds glove securely to hand

• Gunn cut pattern



246-5154 Large Bulk - 12 pair

Split Leather Palm Gloves

• For tough rugged jobs• Full leather index finger• Lined palm and leather tips• Gauntlet cuff style• Elastic on back with knuckle strap


Personal/Safety Hand Protection — GlovesShop Supplies




268-8795 Split Leather Palm Gloves

• Grain leather palm with palm patch• Gunn cut• Water-proof safety cuff• Wing thumb• Full leather index finger and tips with elastic• Size: Men’s large

ID: D01155T1

02c.qxp 10/5/06 1:27 PM Page 93

ID: D00856T1

Leather Welding Gloves

• One piece back fully welted• Color: gold





ID: D00868T1

Split Cowhide Palm Gloves

• For medium- to heavy-duty work• Gunn cut pattern• Full leather index finger• Wing thumb


246-5159 Medium Single Pair


246-5161 Extra Large Single Pair



246-5162 Extra Large Bulk - 12 Pair

246-5163 Traditional All-purpose Gloves

• For general work• Cotton blend• Knit wrist cuff• Plastic dots on inner side and back

of index finger• Size: large• 12 pair per package

Jersey Gloves

• For general purpose use• Soft knit fabric• Stretch to provide excellent fit

ID: D00874T1




Fleeced Gloves

• For outside work• Knit wrist cuff• Double layer of fabric• Added warmth

ID: D00880T1



op S

uppl

ies




246-5169 Reversible Gloves

• For work where grip is important• String knit glove• Black dots on both sides• Knit wrist• Size: large• 12 pair per package

ID: D00862T1

02c.qxp 10/5/06 1:27 PM Page 94

ID: D00892T1

Chemical-resistant Nitrile Gloves

• Protect against cuts, abrasions, punctures, and snags• Embossed texture improves grip• Will not swell or weaken like rubber or neoprene in solvents and fats

NOTE: When using gloves as Personal Protection Equipment (PPE), always consult the Material Safety Data Sheet (MSDS) for the chemical that is being handled for the most appropriate glove.

ID: D00886T1

Part No. Size Quantity Application Chemical Resistance

4C-5522 9 Bulk - 6 Pair Chemical Handling Sodium Hydroxide, Freon, Acids, Solvents, Caustics Xylene, Hydro-chloric Acid, Oils, Grease, Degreasing Stoddard Solvent, PotassiumMachine operations using Hydroxide, Perchloroethylene,cutting oil, metal fabrication Phosphoric Acid

4C-5523 10 Bulk - 6 Pair Chemical Handling Sodium Hydroxide, Freon, Acids, Solvents, Caustics Xylene, Hydro-chloric Acid, Oils, Grease, Degreasing Stoddard Solvent, PotassiumBetter protection than Hydroxide, Perchloroethylene,4C-5522 due to thickness. Phosphoric Acid

246-5164 Neoprene-coated Gloves

• For working with acids, solvents, oils, caustics and greases• High cut resistance compared to rubber and vinyl• Good from 46°C to 149°C (-50°F to 300°F)• Size: large• Single pair

ID: D00904T1

4C-5526 Nitrile-coated Knit-lined Gloves

• For dry and light oil applications• Superior resistance to cuts and abrasions• Porous coating is soft and flexible• Excellent grip



Personal/Safety Hand Protection — GlovesShop Supplies

Chemical Part No. Size Quantity Application Resistance

4C-5526 Large 12 pair Light to Med. duty, general Oil, Greaseper package purpose, fabrication, assembly,

maintenance, shipping andreceiving. Superior abrasion.Excellent grip in light oil appl.

4C-5527 Neox Gloves with Neoprene Coating

• Resistance to cuts, abrasions, and chemicals• Interlock knit lining enhances puncture and snag resistance• Two-piece lining eliminates irritating seams


ID: D00910T1


4C-5527 One size fits most 12 pair per package Resists Heat, Cutting, Acids, Solvents, Use in Plating, Galvanizing (Ex.: Glycol Ether), Oils,Degreasing, Petrochemicals Caustics, Soaps, Alcohols

02c.qxp 10/5/06 1:27 PM Page 95

Nylon Gloves with Nitrile Coating

• For maintenance/assembly and shipping/receiving• Excellent cut and abrasion resistances• Good alternative to heavy cotton-coated gloves

ID: D00928T1



247-6413 Extra-Large Single Pair


247-4450 Extra-Large Bulk - 12 Pair

4C-5529 Neoprene-coated Knit-lined Gloves

• For full-arm protection when using chemicals• Broad protection against cuts and abrasions• Resist oils, caustics, acids, alcohol, and solvents• Fabric lining enhances puncture and snag resistance


ID: D00898T1


4C-5529 One size fits most Single Pair Resists Heat, Cutting, Acids, Solvents, Use in Plating, Galvanizing, (Ex: Glycol Ether), OilsSandblasting Cabinet Caustics, Soaps, Alcohols

Disposable Nitrile Gloves

• Perfect for people allergic to rubber latex• Resistant to punctures and chemicals• Fits either hand• 100 per box, 6 mil thick, 241.3 mm (9 1⁄2 in) long

ID: D00916T1


260-1776 Powdered Small

259-7005 Powdered Medium

246-5179 Powdered Large

259-7006 Powdered Extra Large

260-1802 Powder-Free Small

259-7007 Powder-Free Medium

246-5180 Powder-Free Large

259-7008 Powder-Free Extra Large

Disposable Latex Gloves

• For working with chemicals• Extra stretch for best fit• Excellent sensitivity touch• Seamless construction• Rubber latex• 100 per box, 5 mil thick, 10 in long



op S

uppl

ies

ID: D00922T1

Part No. Size

260-1777 Small

260-1778 Medium

246-5181 Large


02c.qxp 10/5/06 1:27 PM Page 96


Personal/Safety PadlocksShop Supplies

Padlocks

285-1145 Combination Padlock

• Cat part number engraved on side of padlock

ID: D01906T1

Combination-type resettable

Lock mechanism 4-digit dialing

Body width 50.8 mm (2 in)

Shackle diameter 7.94 mm (5⁄16 in)

Horizontal shackle 25.4 mm (1 in)

Vertical shackle 25.4 mm (1 in)

285-1146 Combination Padlock

• Cat part number engraved on back of padlock

ID: D01912T1

Combination-type fixed

Lock mechanism 3-digit dialing

Body width 47.63 mm (17⁄8 in)


Horizontal shackle 20.64 mm (13⁄16 in)

Vertical shackle 19 mm (3⁄4 in)

285-1147 High Security Brass Padlock

• Lock body and shackle black with Cat logo on both sides of bumper, Cat part number on side of bumper

ID: D01918T1

Pin tumbers 5




Vertical shackle 22.26 mm (7⁄8 in)



ID: D01924T1

Package quantity 2

Pin tumbers 5







ID: D01930T1

Pin tumbers 5







ID: D01936T1Package quantity 4

Pin tumbers 5





02c.qxp 10/5/06 1:27 PM Page 97

ID: D01413T1

Absorbent SocksWarranty: Manufacturer’s

• Tubular absorbent socks absorb and contain leaks and spills around machinery (hydraulic oil, coolants, non-aggressive fluids, water, and even hazardous fluids, such as PCB oils and solvents)

• Superior diking and damming capability (hugs the floor, creating an effective barrier or dike that holds back fluids, in emergency situations, even after total absorption)

• Used primarily for everyday housekeeping around machines that leak, seep, or spill fluids• Fits snugly against machine bases and wrap-around corners, keeping work area safe and dry• Fine-grade vermiculite filler (non-biodegradable) quickly soaks up leaks and drips• Durable, stitch-bonded polypropylene skin improves strength• Self-contained, no messy cleanup (no loose absorbents to spread,

sweep, scatter, shovel, or track around)• Reusable for water spills only• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean

workplace floors• Material Safety Data Sheets (MSDS) available• Supplier-branded product

ReferenceNELG5036

ID: D00476T1

Quantity Absorption Absorption Shipping Part No. Per Box Per Box Per Sock Size Weight

235-0844 40 113 l (30 gal) 2.8 l (.7 gal) 75 mm (3 in) diameter x 121 cm (48 in) long 23 kg (50 lbs)

254-3969 8 57 l (15 gal) 6.8 l (1.8 gal) 75 mm (3 in) diameter x 3 m (10 ft) long 11 kg (25 lbs)

Absorbent PillowsWarranty: Manufacturer’s

• Absorbent pillow soaks up small to medium-size spills of oil and other non-aggressive fluids (works best once a spill has been contained)• Fast, effective way to control leaks• Use only as many as required (pillow's large surface area and superior wicking ability speeds cleanup time)• High absorption/fast-wicking cellulose fibers begin to work when pillow contacts liquid and continue until fully saturated• Strong, polypropylene cover will not tear when handling• Easy cleanup (simply pick up and place into proper disposal container)• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors• Material Safety Data Sheets (MSDS) available• Supplier-branded product

ReferenceNELG5036

Quantity Absorption AbsorptionPart No. Per Box Per Box Per Sock Size Shipping Weight

235-0845 40 76 l (20 gal) 1.9 l (64 oz) 25 x 25 x 5 cm (10 x 10 x 2 in) 10 kg (23 lbs)

193-0768 14 53 l (14 gal) 3.7 l (1 gal) 51 x 20 x 3.8 cm (20 x 8 1.5 in) 6.8 l (15 lbs)

Chemical Spill Protection

245-5836 Oil Absorbent Pads

• Exclusive “micro-webs” absorbs up to 100% more oil than other leading melt-blown oil absorbents• Improved absorbency means more liquid pickup, with less product, which can result in lower costs for the user• Very little lint to minimize contamination• One bale picks up an average of 25 gallons of oil• Comes as one bale of 50, 43.2 x 48.3 cm (17 x 19 in) pads• Supplier-branded product

ID: C41257T1


Chemical Spill Protection Personal/SafetySh

op S

uppl

ies

ID: D00477T1


Personal/Safety Chemical Spill ProtectionShop Supplies

ID: D00483T1

ID: D01371T1Quantity Absorption Absorption Shipping Part No. Description per Box per Box/Roll per Pad Size Ply Weight

235-0847 Absorbent Roll 1 roll 155 l (41 gal) — 76 cm (30 in) wide 8 14 kg (30 lbs)46 m (150 ft) longperforated to 25 cm (10 in) x 38 cm (15 in)

235-0848 Absorbent Pad 100 pads 91 l (24 gal) 917 ml (31 oz) 41 x 51 cm 8 9 kg (19 lbs)(16 x 20 in)

235-0865 Absorbent Pad 100 pads 80 l (21 gal) 798 ml (27 oz) 43 x 48 cm 3 8 kg (17 lbs)(17 x 19 in)

235-0866 Absorbent Pad, 100 pads 80 l (21 gal) 798 ml (27 oz) 43 x 48 cm 3 8 kg (17 lbs)non-branded product (17 x 19 in)

235-0867 Absorbent Roll 1 roll 163 l (43 gal) — 96 cm (38 in) wide 3 15 kg (34 lbs)44 m (144 ft) long

235-0868 Absorbent Roll, 1 roll 163 l (43 gal) — 96 cm (38 in) wide 3 15 kg (34 lbs)non-branded product 44 m (144 ft) long

perforated every 25 cm (10 in)

261-0114 Absorbent Mat 1 roll 53.06 l (14 gal) — 76.2 cm (30 in) wide 8 5 kg (11 lbs)15.25 m (50 ft) long

Absorbs the following fluids and chemicals

Heavyweight Absorbent Material for Most Oil, Water-Based Fluids, and ChemicalsWarranty: Manufacturer’s

• Heavyweight, gray, absorbent material designed to absorb chemicals, solvents, oils, coolants, petroleum products, water, water-based fluids, and even acids and bases

• Multiple uses in maintenance, repair, and operating (MRO) areas; cover areas prone to overspray and spills, leaving a cleaner, safer work area; ideal for heavy, concentrated machine leaks and large, spreading spills; keep floors and walk areas safer by absorbing leaks, spills, drips, and overspray

• Dark gray color hides dirt and grime of foot traffic• Thin profile slides into hard-to-reach areas• Made from flame-resistant material which can be used around spark-prone areas, such as welding or grinding equipment• Material will not degrade or have a chemical reaction to a wide variety of chemicals and strong solvents• Absorbs 10 times its weight, reducing material purchase and disposal costs• Dimple design helps absorb more liquid in less time (material retains liquid, even when fully saturated)• Roll material cuts easily with scissors or razor knife — easily shaped to fit virtually any area• Material: 100% polypropylene• Multiple layers are held together with thermal bond points for added strength

and durability—will not fall apart or leave behind residue, even when fully saturated• 235-0848 is packaged in convenient, easy-to-carry dispenser box• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors• Material Safety Data Sheets (MSDS) available• Supplier-branded product unless otherwise indicated

AcetoneAcetonitrileAluminum SaltsAmmoniumHydroxideBarium SaltsBenzyl AlcoholBoric AcidButanolCalcium ChloriteCarbon DisulfideCarbon TetrachlorideChloroformCupric ChlorideCyclohexanoneDichloromethaneDiethylamineDimethylformamideEthyl Acetate

FormaldehydeGasolineGlycol EtherHexaneHydrazineAnhydrousHydrochloric Acid (37%)Hydrogen Peroxide (30%)Hydrofluoric Acid (48%)IsopropanolJet Fuel (JP-5)KeroseneMethanolMethyl Ethyl KetoneMineral OilMineral SpiritsNaphthaNitric Acid (70%)Nitric Acid fuming (90%)

NitrobenzenePerchloroethylenePhenolPotassium Hydroxide 50%Propylene GlycolSodium Hydroxide (50%)StyreneSulfuric Acid (50%)Sulfuric Acid (98%)TetrachloroethyleneTetrahydrofuranThionyl ChlorideToluene1, 1, 1-TrichloroethaneTrichloroethyleneTriethylamineTurpentineWater

02c.qxp 10/5/06 1:27 PM Page 99

261-0115 High-Visibility Yellow MatWarranty: Manufacturer’s

• Absorbs oils, coolants, solvents and water• Ideal for any leak-, spill-, or drip-prone areas• Absorbs a wide range of chemicals without degrading or causing a dangerous chemical reaction• High-visibility yellow color alerts workers to potential dangers where work or repairs are taking place• Flame-resistant — safe for spark-prone areas such as welding robots• Comes with a variety of socks and pillows along with a roll of universal mat• Low profile — slides into hard-to-reach areas• Supplier-branded product

ID: D01365T1

Absorbency 125 l (33 gal) per bag

Length 46 m (150 ft)

Width 61 cm (24 in)

Weight 10.9 kg (24 lbs)

Material 100% polypropylene

Ply 8

Oil-Only Absorbent MaterialWarranty: Manufacturer’s

• Heavyweight, white, absorbent material used for spill cleanup and everyday maintenance absorption of non-flammable petroleum products and petroleum-based fluids, such as oil, gasoline, kerosene, diesel fuel, solvents, etc.

• Absorbs petroleum-based fluids only—ideal for situations where water absorption is not necessary• Roll material works great for factory floors saturated with oils or other petroleum-based fluids• Less expensive than a universal absorbent (ideal for oil-only spills or drips)• Material will not degrade or have a chemical reaction to petroleum-based fluids• Absorbs 10 times its weight, reducing material purchase and disposal costs• Dimple design helps absorb more liquid in less time (material retains liquid even when fully saturated)• Roll material cuts easily with scissors or razor knife — easily shaped to fit virtually any area• Material: 100% polypropylene• Multiple layers are held together with thermal bond points for added strength

and durability—will not fall apart or leave behind residue, even when fully saturated• Material can be incinerated with less than 0.1% ash while producing 21,000 Btu/lb• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors• Material Safety Data Sheets (MSDS) available• Supplier-branded product unless otherwise indicated

ID: D00489T1

Quantity Absorption Absorption Shipping Part No. Description per Box per Box/Roll per Pad Size Weight Ply Color

235-0850 Oil-Only Absorbent Roll 1 roll 155 l (41 gal) — 76 cm (30 in) wide 14 kg (30 lbs) 8 White46 m (150 ft) long

235-0853 Oil-Only Absorbent Pad 50 pads 45 l (12 gal) 917 ml (31 oz) 41 x 51 cm 4 kg (9 lbs) 8 White(16 x 20 in)

235-0869 Oil-Only Absorbent Pad 100 pads 76 l (20 gal) 739 ml (25 oz) 43 x 48 cm 8 kg (17 lbs) 3 White(17 x 19 in)

235-0870 Oil-Only Absorbent Pad, 100 pads 76 l (20 gal) 739 ml (25 oz) 43 x 48 cm 8 kg (17 lbs) 3 Whitenon-branded product (17 x 19 in)

235-0871 Oil-Only Absorbent Roll 1 roll 151 l (40 gal) — 96 cm (38 in) wide 15 kg (34 lbs) 3 White44 M (144 ft) long

235-0872 Oil-Only Absorbent Roll, 1 roll 151 l (40 gal) — 96 cm (38 in) wide 15 kg (34 lbs) 3 Whitenon-branded product 44 M (144 ft) long



op S

uppl

ies

02c.qxp 10/5/06 1:27 PM Page 100



ID: D00482T1

235-0849 Lightweight Absorbent RollWarranty: Manufacturer’s

• Lightweight, gray, absorbent mat designed to cover areas prone to overspray and spills, leaving a cleaner, safer work area• Ideal for light machine overspray and small, annoying leaks of oils, coolants, solvents, and water• Great for day-to-day housekeeping and repair work• Cross roll perforations — easily and quickly tear to any size sheet, as small as 25 x 61 cm (10 x 24 in)• Works well in narrow walkways• Multiple layers are held together with thermal bond points for added strength

and durability—will not fall apart or leave behind residue• Absorbs 10 times its weight, reducing purchase and disposal costs• Dark gray color hides dirt and grime• Dimple design absorbs more liquid in less time and greater liquid retention holds liquid even when roll is saturated• Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors• Material Safety Data Sheets (MSDS) available• Supplier-branded product

Quantity per box 1 roll

Absorption per box 125 l (33 gal)

Size 61 cm (24 in) wide by 91 M (300 ft) long

Material 100% polypropylene

Ply 8

Shipping weight 11 kg (23 lbs)

Sorbent Spill Kits• Most versatile spill kit on today’s market• Chemical Sorbent Folded Spill Kit is a non-selective sorbent which will “sorb” most aggressive chemicals• 170-8604 fits into small places where accessibility is important; unique construction and compressibility allows storage behind

or under seats and/or lab benches where other spill kits will not fit• 170-8605 is packaged in a 20 gallon drum and can be placed in key locations throughout a facility• Most complete spill kit in a roll (material can be used as a pillow, pad, roll, or boom)• Scrim coating on one side increases strength and eliminates linting• Each kit contains a containment bag and tie• Molded handles makes transportation easier

170-8604 Spill Kit, 5 Gallon• Absorb 5 gallons of petroleum-based fluid• Roll of folded sorbent, 13 x 66 cm (5 x 26 in); fully opened 48 x 66 cm (19 x 26 in); Qty 1• Disposal bag and tie, Qty 1

ID: D01101T1

170-8605 Spill Kit, 31 Gallon• Absorb 31 gallons of petroleum-based fluid• 20 gallon drum with lid and plastic closure ring, Qty 1• Roll of folded sorbent, 13 x 127 cm (5 x 50 in); fully opened,

48 x 127 cm (19 x 50 in), Qty 2• Sorbent pads, 43 x 48 cm (17 x 19 in), Qty 30• Disposal bags and ties, Qty 3

ID: D01113T1

02c.qxp 10/5/06 1:27 PM Page 101

ID: D01419T1

254-3767 Small Spill Response BagWarranty: Manufacturer’s

• Highly-visible wall mounted bag• Absorbs oils, coolants, solvents, and water• Can absorb up to 38 liters (10 gallons)• Water resistant bag with hook and loop closure opens and closes easily• Compact size — can be mounted throughout the shop where spills are most likely to occur• Weight: 6.4 kg (14 lbs)• Helps to comply with 40 CFR 263:30 (a)• Material Safety Data Sheets (MSDS) available• Supplier-branded product

ID: D01425T1

Consist Qty. ReorderPart No.

Absorbent sock, 8 cm x 122 cm (3 in x 48 in) 4 235-0844

Universal mat pads, 51 cm x 41 cm (20 in x 16 in) 28 235-0848

Disposable bags and ties 5 —

254-3768 Small Spill Response CartWarranty: Manufacturer’s

• Absorbs oils, coolant, solvents, and water• Ideal for spill-prone areas• Comes with a variety of socks, mat pads, pillows, and wipers• Products in cart can absorb up to 59 liters (15.5 gallons)• Eight-inch rubber wheels or handles on both top and bottom for carrying• Cleanup instructions on cart door• Cart can be locked for security• Weight: (29.5 kg) 65 lbs• Helps to comply with 40 CFR 112.7(c) (1) (vii) where absorbents can be used

to control oil discharges• Material Safety Data Sheets (MSDS) available• Supplier-branded product

ReorderConsist Qty. Part No.


Absorbent sock, 8 cm x 250 cm (3 in x 10 ft) 2 254-3969

Universal mat pads, 38 cm x 22 cm (15 in x 8.5 in) 52 235-0865/235-0848 1

Absorbent pillows, 25 cm x 25 cm (10 in x 10 in) 10 235-0845

Wipers, 33 cm x 30 cm (13 in x 12 in) 56 235-0859


Nitrile gloves 1 4C-5522, 4C-5523, or 4C-5526

Safety goggles 1 233-8583

Disposable boots 1 —

Repair putty, 178 mm (7 in) tube 2 —

Emergency response guidebook 1 —

Instruction manual 1 —1 Equivalent – not an exact replacement



op S

uppl

ies

02c.qxp 10/5/06 1:27 PM Page 102



ID:µ D01437T1

254-3770 Small Spill Response CartWarranty: Manufacturer’s

• Absorbs oils, coolant, solvents, and water• Ideal for spill-prone areas• Comes with a variety of socks and pillows along with a roll of universal mat• Products in cart can absorb up to 53 liters (14 gallons)• Eight-inch rubber wheels on board and handles on both top and bottom• Cleanup instructions on cart door• Shelves and compartments inside cart for easy organization• Cart can be locked for security• Weight: (18 kg) 40 lbs• Helps to comply with 40 CFR 112.7(c) (1) (vii) where absorbents can be used to control oil discharges• Material Safety Data Sheets (MSDS) available• Supplier-branded product


Absorbent socks, 8 cm x 122 cm (3 in x 48 in) 5 235-0844

Universal mat, 38 cm x 18 m (15 in x 60 ft) 1

Absorbent pillows, 25 cm x 25 cm (10 in x 10 in) 4 235-0845


Nitrile gloves 1 4C-5522, 4C-5523, or 4C-5526

Safety goggles 1 233-8583

Repair putty, 178 mm (7 in) tube 1 —

”When the Spill Strikes” poster 1 —

254-3769 Large Spill Response KitWarranty: Manufacturer’s

• Absorbs oils, coolants, solvents, and water• Comes with a variety of socks, mats, pillows, and loose aborbents• Products in cart can absorb up to 144 liters (38 gallons)• Polyethylene container with hinged lid stores and protects absorbents from moisture, dirt, and damage• Equipped with eight-inch rubber wheels and built-in handles for easy mobility in tight spaces• Weight: 48.5 kg (107 lbs)• Helps to comply with 40 CFR 112.7(c) (1) (vii) where absorbents can be used to control oil discharges• Material Safety Data Sheets (MSDS) available• Supplier-branded product

ID: D01443T1



Absorbent sock, 8 cm x 250 cm (3 in x 10 ft) 1 254-3969

Absorbent pillows, 53 cm x 43 cm (21 in x 17 in) 2 235-0845 or 193-0768 1

Universal mat pads, 51 cm x 41 cm (20 in x 16 in) 50 235-0848


Shop floor sweep material 1

Loose absorbent material 2

Tamper-proof labels 6 —

Instructions 1 —1 Equivalent – not an exact replacement

02c.qxp 10/5/06 1:27 PM Page 103

ID: D01687T1

Towels and Wiper Products

288-4209 DRC Quarter-Fold Wipers

• Highly absorbent material—cleans up oil, grease, water, and other messy fluids• Strong and abrasion-resistant—resists tearing even when wet• Offers a low-lint alternative• Economical alternative to shop rags or towels• Soft cloth-like feel

ID: D01699T1

Size 31.75 x 33.02 cm (12.5 x 13 in)

Color White

Quantity 56 wipers per bundle, 18 bundles per case

DRC Pop-Up Shop Towels

• Highly absorbent material—cleans up oil, grease, water, and other messy fluids• Soft cloth-like feel• Strong and abrasion-resistant—resists tearing even when wet• Offers a low-lint alternative in a handy pop-up container

ID: D01705T1

Part No. Size Color Quantity

288-4210 24.13 x 41.91 cm (9.5 x 16.5 in) White 100 towels per box, 9 boxes per case

288-4211 24.13 x 41.91 cm (9.5 x 16.5 in) Blue 100 towels per box, 9 boxes per case

288-4212 DRC Center-Pull Roll Dry Shop Towels

• Highly absorbent material—ideal for use on grease, oils, and other messy fluids• Strong and abrasion-resistant—resists tearing even when wet• Center-pull wiper wrapped in clear plastic film with re-closeable top tab for easy dispensing

Size 22.86 x 33.02 cm (9.0 x 13.0 in)

Color White

Quantity 300 towels per roll, 1 roll per pack


Towels and Wiper Products Personal/SafetySh

op S

uppl

ies

301-9696 DRC Jumbo Roll Shop Towels

• Highly absorbent material—cleans up oil, grease, water, and other messy fluids• Soft cloth-like feel• Strong and abrasion-resistant—resists tearing even when wet Size 31.75 x 33.02 cm (12.5 x 13 in)

Color White

Quantity 692 towels per roll, 1 roll per case

265-2255 All-Purpose WipersWarranty: Manufacturer’s

• Highly absorbent—cleans up oil, grease, water and other messy fluids• Strong and abrasion resistant—great wet-strength for scrubbing• Pliable for reaching into tight places• Soft for personal cleaning• Low lint and won't leave a residue• Economical alternative to shop rags or towels

ID: D00970T1

Size 30.5 x 33 cm (12 x 13 in) quarter-folded

Color blue

Quantity 56 wipers per pack, 18 packs per case

254-3422 WypAll® X60

• Designed to outperform rags with Hydroknit technology in lightweight wiper• Reinforced for extra scrubbing and cleaning power• Leaves no residue• Good on grease and oil, adhesive cleaning and cable lubricant removal• Good for applying thinners and solvents

ID D00964T1

Size 23.1 x 42.7 cm (9.1 x 16.8 in)

Color white

Quantity 126 wipers per box, 10 boxes per case


Personal/Safety Towels and Wiper ProductsShop Supplies

ID: D01711T1

02c.qxp 10/5/06 1:27 PM Page 105


Towels and Wiper Products Personal/SafetySh

op S

uppl

ies

WypAll® Manufactured Pop-up Rags

• HydroKnit fast-absorbing material—highly absorbent• Reinforced for heavy maintenance cleaning and long-lasting performance that also reduces waste• Cleans up oil, grime, and solvents• Good for applying thinner and solvents• Pound for pound absorbs more oil and water than shop rags• Packaged in sturdy corrugated pop-up dispenser cartons• Can also use with 269-3368 Dispenser

ID: D01207T1

Part No. Wiper Size Color Quantity

267-6535 23.1 x 42.7 cm white 100 rags per carton, (9.1 x 16.8 in) 10 cartons per case

267-6536 23.1 x 42.7 cm blue 100 rags per carton, (9.1 x 16.8 in) 10 cartons per case

267-6532 WypAll® Manufactured Rags

• HydroKnit fast-absorbing material—highly absorbent• Cleans up oil, grime, and solvents• Good for applying thinner and solvents• Pound for pound absorbs more oil and water than shop rags• Use with 1U-5432 Paper Wiper Dispenser

ID: D00952T1

Size 31.8 x 36.6 cm (12.5 x 14.4 in)

Color white

Quantity 76 wipers per bundle, 12 bundles per case

265-2256 Low Lint Task Wipers

• For lab environments where clean rooms require low lint• Excellent for surface wiping in clean manufacturing environments—fuel systems, hydraulics, diagnostic equipment and precision instruments• Continuous filament rayon/polyester spun-like blend for cloth-like feel• Excellent absorption rate and capacity• Solvent resistant• Double wrapped in anti-stat packaging

Size 20.3 x 20.3 cm (8 x 8 in)

Color white

Quantity 100 wipers per pack, 3 packs per case


Personal/Safety Towels and Wiper ProductsShop Supplies

Dispensers for Manufactured Rags and Paper Wipers

ID: D01822T1

ID: D01822T1

Part No. Description Usage

1U-5432 Paper Wiper Dispenser, Plastic use for 267-6532 Manufactured Ragsand 162-5791 Shop Towel

269-3368 Dispenser, White Metal use for 267-6535 and 267-6536 Manufactured Rags

263-0892 Hard Roll Towels

• Towels compressed on roll so more towels fit in same space — no sacrifice in performance, change roll less often

• Size: 20.3 cm x 304.8 m (8 in x 1000 ft) roll• Color: white• Material: paper• Package quantity: 12 rolls

ID: D01251T1

162-5791 Shop Towel

• Excellent absorbency• Perfect to use on grease or oil• Low-lint, 100% polypropylene construction• Good for cleaning and disinfecting surface• Stands up well to spirits and solvents• Use with 1U-5432 Paper Wiper Dispenser

ID: D00976T1

Size 30.7 x 42.7 cm (12.1 x 16.8 in)

Quantity 180 per box

02c.qxp 10/5/06 1:27 PM Page 107

ID: D01185T1 ID: D00982T1

1U-7427 Engine Cover

• Protects engine from dirt and debris• Can be used as drop cloth or dust

cover• Affordable and disposable

Size 122 x 183 cm (48 x 72 in)

Quantity 50 sheets per case

Dust Cap for 55 Gallon Drum

• Excellent for covering open drum containers• Ideal for most industrial, food, chemical, and pharmaceutical applications• Low cost protection from dirt, dust, and moisture• Prevents contamination and evaporation• Elastic around entire opening helps keep cover in place• Provides easy access to contents• Fits a 208.2 l (55 gal) drum

ID: D01942T1


270-5347 863.6 mm (34 in) diameter 100 per box

Rugs

• Keep shop floors cleaner and safer• Absorb most shop fluids and oils• Tough and tear resistant—won’t break down• Durable enough to withstand heavy traffic• Coated rug has a poly-backed coating to provide extra protection to shop floors

ID: C79369T1

Part No. Description Size Absorbent Capacity

159-5155 Rug 91 x 91.5 m (36 x 300 in) 121 l (32 gal) per roll

159-5160 Rug (Coated) 91 x 254 cm (36 x 100 in) 40 l (10.5 gal) per roll


Miscellaneous Personal/SafetySh

op S

uppl

ies

Diamond Plate Sponge Cote Floor Mats

• Tough vinyl surface tile bonded to non-absorbent sponge base• Diamond plate surface tread is durable and slip resistant• 9.5 mm (3⁄8 in) vinyl sponge base reduces fatigue and strain• Grease and chemical resistant, non-flammable• Edges beveled for maximum safety

ID: C41221T1

Part No. Size

4C-8102 51 x 76 cm (2 ft x 3 ft)

4C-8103 76 x 127 cm (3 ft x 5 ft)

263-0884 Paper Cups

• Two-piece construction with tightly rolled rim

• Fully wax coated inside and out with a satin finish

• Capacity: 236.8 ml (8 oz)• Quantity: 2000 per case

Miscellaneous

02c.qxp 10/5/06 1:27 PM Page 108


Personal/Safety MiscellaneousShop Supplies

Safety-Zone Interlock Floor Mats

• The first molded, two-color interlocking runner matting• Slip-resistant deck-plate surface ensures safe footing• Thousands of buoyant air pockets cushion feet, reducing strain to legs and back• Sections interlock to create runners of any length, zip apart easily for removal and cleaning• 12.7 mm (1⁄2 in) thick non-marking, non-staining high quality rubber

ID: C41222T1

Part No. Size Unit

4C-8104 61 W x 91.4 cm L (24 in x 36 in) Center

4C-8105 61 cm W x 91.4 cm L (24 in x 36 in) End

4C-8106 91.4 W x 61 cm L (36 in x 24 in) Center

4C-8107 91.4 W x 61 cm L (36 in x 24 in) End

Abrasive Coated Kushion Walk Floor Mats

• Anti-slip protection in hazardous situations• 9.5 mm (3⁄8 in) thick, 100% Koroseal vinyl, coated with abrasive diamond-hard mineral particles• Underside is knobbed for aeration and sanitation• Reliable, anti-slip protection provides cushioned comfort and resiliency underfoot• Available in unslotted or slotted design for drainage• Edges beveled for maximum safety• Earthtone gray

ID: C41223T1

Part No. Size

4C-8116 61 cm x 9.14 m (2 ft x 30 ft)

4C-8117 91.4 cm x 9.14 m (3 ft x 30 ft)

4C-8118 61 cm x 18.3 m (2 ft x 60 ft)

4C-8119 91.4 cm x 18.3 m (3 ft x 60 ft)

4C-8120 91.4 cm x 121 cm (3 ft x 4 ft)

4C-8121 91.4 cm x 182.9 cm (3 ft x 6 ft)

Ultra-Tred Armor Cote Floor Mats

• Long-lasting comfort and safety all in one• Urethane coating protects against chemicals, abrasions, dirt and moisture• Wears five times longer than comparable uncoated products• Yellow beveled edges maximize safety• 9.5 mm (3⁄8 in) thick vinyl compound for buoyancy underfoot

ID: C41228T1

Part No. Size

4C-8112 61 cm x 91.4 cm (2 ft x 3 ft)

4C-8113 91.4 cm x 152.4 cm (3 ft x 5 ft)

4C-8114 61 cm x 18.3 m (2 ft x 60 ft)

4C-8115 91.4 cm x 18.3 m (3 ft x 60 ft)

TileTop Sponge-Cote Floor Mats

• Ultimate cushioned support for employees who stand at work• Unlimited uses in industrial, professional, laboratory and commercial settings• Buoyant sponge dramatically reduces stress and back fatigue, improving efficiency• Comfortable 12.7 mm (1⁄2 in) thickness is beveled for safety• Marbleized rubber stays beautiful, is easy to maintain• Not for use with spike heels, casters or stool legs

ID: C41224T1

Part No. Size

4C-8108 45.7 cm x 76.2 cm (18 in x 30 in)

4C-8109 45.7 cm x 121.9 cm (18 in x 48 in)

4C-8110 61 cm x 91.4 cm (24 in x 36 in)

4C-8111 91.4 cm x 152.4 cm (36 in x 60 in)

02c.qxp 10/5/06 1:27 PM Page 109

ID: C34413T1

Clean Walk MatsSMCS Code: 7951-580Model: None

• Used to remove dirt and contamination from shoes, wheels, and other passing objects — keeps dirt and grease from being tracked into office area

• Comes in three sizes• Provides an inexpensive way to keep carpets and office areas clean• Ideal for shop-to-office, paint, or cleaning areas• Mat has 30 peelable layer, providing a fresh cleaning surface with each exposed layer

ID: C78589T1

Part No. Size

138-3852 457.2 mm x 914.4 mm (18 x 36 in)

138-3855 457.2 mm x 1143 mm (18 in x 45 in)

138-3856 609.6 mm x 1143 mm (24 in x 45 in)

4C-9820 Portable Microfiche Reader with One Lens and 120 VAC TransformerWarranty: Manufacturer’s

• Combines the portability of a personal size reader with the quality and features of larger desktop models• Features a floating lens mount for positive focus, an auto opening carrier for precise indexing and a distortion free image

ID: C41378T1

ID: C41361T1

Screen size 15 cm (6 in) H x 20 cm (8 in) W, Nonglare screen

Projection Rear

Carrier 152 mm (6 in) x 102 mm (4 in) Auto-Opening Glass Flats

Lens 48x COM Lens

Lamp 9W, 6V FKY QuartzHalogen Lamp

Overall dimensions 10.5 cm (41⁄8 in) H x 25 cm (93⁄4 in) W x 27 cm (103⁄4 in) DClosed

32 cm (121⁄2 in) H x 25 cm (93⁄4 in) W x 27 cm (103⁄4 in) DOpen

Weight 4 kg (9 lbs)

Options


4C-9822 Transformer, 120 VAC

4C-9824 Cigarette Adapter, 12 VDC

4C-9825 Carrying Case for Microfiche Reader

4C-9826 Spare Lamp, 9W, 6V, FKY

4C-9827 Overall Size Bifold Microfiche Holder with 30 Slots Available, 190.5 mm (71⁄2 in)

4C-6193 Hand Held Microfiche ViewerWarranty: Manufacturer’s

• Accepts microfiche, jackets or aperture cards

• Viewer operates on ambient light or internal batteries, 2 C-cells (not included)

• Spare bulb and vinyl carrying case included with each reader

• Overall dimensions:66.7 mm W x 38.1 mm D x 149.3 mm L (25⁄8 in x 11⁄2 in x 57⁄8 in)

• Weight of unit (with batteries) is 340.2 g (12 oz)

8S-2257 Eye LoupeWarranty: Manufacturer’s

• 25.4 mm (1 in) depth• 12X power• Extremely portable



op S

uppl

ies

ID: C34441T1

02c.qxp 10/5/06 1:27 PM Page 110



ID: D00778T1

9U-7377 Metal Etching Pen

• Leaves distinctive, smudge-proof, black markings• Indispensable anyplace where metals, hardened or thin-walled, have to be marked or identified• Strong effect on heavy metals, stainless steel, iron, copper, brass, nickel, tin, lead• No electrical flux necessary; special acid solution flows like ink in a felt-tip pen

and a permanent etch is produced on the metal• Ideal for toolroom use and marking in the machine shop• Apply on clean surface; after application wipe dry with oily cloth.

Tie Down Straps

• Elastic rubber tie down straps with a hook at each end• Excellent for general tie down applications such as tarps and covers• Material: SBR Rubber

Part No. Size

262-9304 8 x 12.6 x 381 mm (.31 x .50 x 15 in)

262-9305 10 x 13 x 533 mm (.39 x .50 x 21 in)

Black Wire

• Black annealed mechanics tie wire• Soft and pliable — makes a perfect tie everytime

ID: D00820T1

Part No. Size Material Quantity Length/Weight

262-9959 18 Gauge Black iron 1 Roll 177 m (582 ft)

172-0852 Creeper

• Rugged, one-piece, plastic body construction• Easy-to-clean surface is resistant to solvents, greases, and fuels• Body-fitting design, contoured to provide optimum comfort• Low profile, gives maximum workspace but still clears air hoses• Six pop-in urethane wheels resist corrosion and provide a smooth ride

ID: C79649T1

Dimensions 965 x 445 x 102 mm (38.0 x 17.5 x 4.0 in)

Wheel size 51 mm (2.0 in)

Clearance 22.2 mm (.87 in)

Cat® Mudflaps

• Yellow on black rubber fiber• Sold individually

ID: C70231T1

Part No. Size

9U-7309 12 inch wide x 18 inch high

9U-7310 20 inch wide x 14 inch high

02c.qxp 10/5/06 1:27 PM Page 111

ID: C80305T1

Diesel Power Mudflaps

• White or black rubber fiber

ID: C44032T1

Part No. Size Color Use

7X-2986 61 cm x 91.4 cm (24 in x 36 in) Black Large, on-highway trucks

154-6564 61 cm x 76.3 cm (24 in x 30 in) Black Large, on-highway trucks

7X-2982 61 cm x 35.6 cm (24 in x 14 in) Black Pickups, campers, trailers, and vans

7X-2984 61 cm x 91.4 cm (24 in x 36 in) White Large, on-highway trucks

7X-2983 61 cm x 35.6 cm (24 in x 14 in) White Pickups, campers, trailers, and vans

262-4862 Triangular Highway Warning Kit

• Three reflective triangles in a sturdy plastic case• Compact, fold-flat design• Durable spring steel base• Complies with Federal Motor Vehicle Safety Standard Number 1• Great for day or night visibility• Case dimensions (L x W x H): 45.7 x 13 x 13 cm (18 x 5 x 5 in)• Size: 43 cm (17 in)• Quantity: 3/case

Fluid Sampling Extraction Tools for Pressurized CompartmentsWarranty: Manufacturer’s

• Valve locations provide oil sample confidence and continuity — Comparative data of pressurized oil samples is more reliable because the sample is taken from a continuous flow of oil at a known location.

• A probe is provided that allows the valve to be quickly flushed prior to taking the oil sample• The sample bottle group is packaged, and sealed in a plastic bag to insure cleanliness• Pressurized oil sampling is a fast, economical and clean method of obtaining oil samples

from pressurized systems• Better represents oil condition because the oil is continually mixed and circulated• 10 to 20 times faster than sampling oil from non-pressurized systems• Mailing container is available so the oil sample can be conveniently mailed

to the testing laboratory


1 169-8373 Bottle Group, 300 per box

2 162-8873 Probe, Holder

3 177-9343 Cap and Probe Group, 500 per box

4 4C-4600 Mailer Container — reusableTube — 30.5 m rolls (100 ft)

5 1U-8757 6.35 mm O.D. x 30.5 m rolls(1⁄4 in x 100 ft) (5 rolls per box)

6 4C-4056 7.9 mm O.D. x 30.5 m rolls (5⁄16 in x 100 ft)(5 rolls per box) (not pictured)

7 169-7373 Clear Bottle, 71g (2 1⁄2oz), 200 per box

8 169-7372 Clear Bottle, 114g (4 oz), 200 per box

9 1U-5718 Vacuum Pump1U-5719 Seal Kit for 1U-5718 Pump (not pictured)

10 8T-9208 Probe, purging

11 1U-7648 Tube Cutter1U-8589 Replacement Blades (not pictured)


12 8C-8456 Sealed Cap

13 8C-3446 Oil Sampling Valve (7⁄16 inch-20 — ext. thread)3J-7354 O-Ring Seal for 8C-3446 (not pictured)

14 7X-3387 Oil Sampling Valve (1⁄4 inch-18 NPTF— ext. thread)

15 8C-3345 Oil Sampling Valve (M10 x 1 — ext thread)8T-7876 O-Ring Seal for 8C-3345 (not pictured)

16 8C-3445 Dust Cap (Engine)8C-3447 Dust Cap (Transmission) (not pictured)8C-3451 Dust Cap (not pictured)6V-0852 Dust Cap (Blank) (not pictured)

Not shown

Tube, 2.1 m (7 ft) pieces

4C-4055 6.35 mm O.D. x 2.1 m (1⁄4 in x 7 ft), 250 pieces per box

4C-4057 7.9 mm O.D. X 2.1 m (5⁄16 in x 7 ft), 240 pieces per box

4C-3602 Frosted Bottle, 57g (2 oz), 700 per box



op S

uppl

ies

02c.qxp 10/5/06 1:28 PM Page 112



169-8373 Bottle Group (Package Qty. — 300)This bottle group is sealed in a plastic bag with sampling instructions included.The bottle group is ready to use when it is removed from the bag after the valvehas been purged and the sample is ready to be taken. The bottle included in thisgroup (169-7372) has the capacity to provide a 114 g (4 oz) sample. The169-7372 can also be ordered by itself, 200 per case.

After the sample is obtained, the probe and tube are removed from the bottlecap and holder, and discarded, and the cap-cover seals the bottle. Labels foridentifying the sample (obtained locally) can then be attached to the bottle foridentification purposes. The 4C-4600 mail tube is available to send the oilsample to the laboratory. The laboratory also provides the mailing label.

177-9343 Probe and Cap Group (Package Qty. — 500)The probe and cap group provides the same probe and cap that are used in the169-8373 Bottle Group, however, without the bottle. This group is also sealed ina plastic bag with sampling instructions included. This group allows the dealerthe flexibility to use other bottles such as the smaller 71 g (21⁄2 oz) 169-7373bottle assembly (which must be ordered separately). (The cap requires that thebottles have a 38 M thread.)

169-7373 Bottle Assembly (Package Qty. — 200)This smaller bottle assembly (169-7373) can be used with the 177-9343 Probeand Cap Group and reduces mailing expense by approximately one-half fordealers whose oil sample labs can provide effective full service analysis with 71 g (21⁄2 oz) or less of oil. These bottles can be used for engine samples sinceparticle count is not used for engine samples. This bottle can also be used withthe 1U-5718 Vacuum Pump used for non-pressurized oil sampling.

8T-9208 Probe Assembly (Package Qty. — 1)The 8T-9208 Probe Assembly can be attached to a 6.35 mm (1⁄4 in) I.D. rubberhose (6K-0713 Hose — 228.6 mm (9 in) long or any desired length cut from bulk5P-6442 Hose or equivalent 100R6 type high temperature — low pressurehose). The 8T-9208 Probe and hose connected to a locally obtained wastecontainer provide a method to purge or flush the 8C-3446, 8C-3345, or 7X-3387sample valves prior to obtaining the desired oil sample using either the169-8373 Bottle Group or 177-9343 Probe and Cap Group with the desiredbottle. Approximately 14.8 cm3 to 29.6 cm3 (1⁄2 to 1 ounce) of expelled fluidpurges the valves.

Pressurized systems on many Caterpillar products are factory equipped withsampling valves to quickly extract oil samples with the above tools. SpecialInstruction SEHS9043 details retrofitting some earlier models with oil samplingvalves, as well as pointing out the respective valve locations on modelscurrently factory equipped with the oil sample valves

The following valves, fittings and adapters are required or are commonly usedfor retrofitting the sampling valves to pressurized systems:

Oil Sampling Valves and O-Ring Seals


8C-3446 Oil Sampling Valve (7⁄16 inch-20 ext. thread)

3J-7354 O-Ring Seal for 8C-3446

8C-3345 Oil Dampling Valve (Mid X1 ext. thread)

8T-7876 O-Ring Seal Form 8C-3345

7X-3387 Oil Sampling Valve (1⁄4 inch-18 NPTF ext. thread)

Protective Dust Caps for Oil Sampling Valves (These are rubber caps with embossed symbols to indicate system being sampled.)

8C-3445 Dust Cap (Engine)

8C-3447 Dust Cap (Transmission)

8C-3451 Dust Cap (Hydraulic)

6V-0852 Dust Cap (Blank)

8C-8456 Sealed Cap

The 8C-8456 Sealed Cap can be applied to the valves with the valve dust capretention ring left in place. This cap enables the user to quickly seal a leakingvalve and prevents the need to immediately deadline (or stop) the machine orcompartment. The leaking valve can then be repaired (flushed) or replacedduring the scheduled maintenance period.

Some retrofit applications of the various valves may require the 8C-8456 SealedCap to provide maximum protection for both sealing and environmentalcontamination, such a brake and hydraulic system exposed to severe elements.This cap serves ONLY as a temporary solution to a leaking sampling valve.

Miscellaneous fittings and adapters commonly used for oil sampling valve retrofit installations


3B-7722 Reducer 3⁄8 inch-18 NPTF to 1⁄4 inch-18 NPTF

8C-6427 Adapter 1⁄4 inch-18 NPTF external to 7⁄16 inch-20 SAE internal

6V-7529 Adapter 1⁄8 inch-27 NPTF external to 7⁄16 inch-20 SAE internal

7J-8611 Adapter 90° street elbow 1⁄4 inch-18 NPTF

5P-9617 Adapter Reducer 9⁄16 inch-18 SAE external to 7⁄16 inch-20 SAE internal

3J-1907 O-Ring Seal for 5P-9617 Adapter

3J-5390 Adapter Reducer 3⁄8 inch-18 NPTF external to 1⁄8 inch-27 NPTFinternal

9T-6865 Adapter Plug 5⁄8 inch-12 SAE external to 7⁄16 inch-20 SAE internal

2S-4078 O-Ring Seal for 9T-6865 Adapter Plug

5P-3501 Adapter 9⁄16 inch-18 SAE external to 1⁄4 inch-18 NPTF internal

3J-1907 O-Ring Seal for 5P-3501 Adapter

3L-6521 Adapter Tee 1⁄4 inch-18 NPT(two internal and one external)

1P-9369 Adapter Tee 1⁄8 inch-27 NPT (two internal and one external)

6V-3966 Pressure Test Valve 1⁄4 inch-18 NPTF external

7M-8489 Adapter 90° elbow 9⁄16 inch-18 SAE external to 1⁄4 inch-18 internal

5P-3413 Pipe Sealant 12⁄3 oz (85 g) tube.

02c.qxp 10/5/06 1:28 PM Page 113

Fluid Sampling Extraction Tools for Non-Pressurized CompartmentsWarranty: Manufacturer’s

Fluid sampling extraction tools are used to obtain fluid samples fromnon-pressurized vehicle compartments such as final drives, differentialcompartments, transfer cases, axle housings, etc.

The 1U-5718 Vacuum Pump is capable of pulling 25 inch (7.62 mm) Mercury(vacuum). The pump is compact and accepts the 169-7372, 114 g (4 oz), and169-7373 Bottle Assembly, 71 g (21⁄2 oz), bottles, or any 38 M threaded plasticbottle, and 6.35 mm (1⁄4 inch) O.D. and/or 7.9 mm (5⁄16 inch) O.D. plastic tube.

The 1U-5719 Kit provides replacement seals for the vacuum pump.

The 169-7372 Bottle has 4 oz (114 g) capacity. The bottle is marked showingfluid fill range at 3⁄4 capacity. The fill range provides a reminder to not overfillthe bottle. Partially filling the bottle satisfies both mailing and lab requirements.Full bottles expand because of temperature changes that can possibly rupturewithin the mailing container. The partially filled bottle also allows the lab toshake the fluid sample prior to extracting fluid for testing. Labels identifying thefluid are obtained locally. The label is processed locally and attached to thesample bottle.

The 169-7373 Bottle is the same as the 169-7372 bottle except the capacity is71 g (21⁄2 oz) rather than 114 g (4 oz). Both are clear high performance plasticrated at 91°C (195°F).

The 1U-8757 Tubing consists of five 30.5 m (100 ft) rolls of 6.35 mm (1⁄4 inch)O.D. plastic tubing. Random lengths of tubing can be easily dispensed from thetubing package. The tubing connects the vacuum pump to the fluid in thecompartment. The tubing is discarded after each sample extracted.

The 4C-4056 Tubing consists of five 30.5 m (100 ft) rolls of 7.9 mm (5⁄16 inch)O.D. plastic tubing. Again, random lengths of tubing can be easily dispensedfrom the tubing package. This tubing permits extraction of heavier oils whenusing the vacuum pump.

Both tubing sizes are also available in pre-cut 2.1 m (7 ft) lengths that arepackaged 250 pieces per box. This eliminates cutting the tube for each sample.

The 4C-4055 Tubing contains 250 pieces of 6.35 mm (1⁄4 inch) O.D. tubing each2.1 m (7 ft) long.

The 1U-7648 Tube cutter is a convenient tool that easily cuts the desirablelength of either 6.35 mm (1⁄4 inch) or 7.9 mm (5⁄16 inch) plastic tubing. The cuttercan cut the tubing at 90° or at a bias. The 1U-8589 blades are available asreplacement blades for the cutter.

The following summarizes various sampling tools available through theCaterpillar Parts Distribution System:


4C-4056 Tube, 7.9 mm (5⁄16 inch) O.D. by 30.5 m (100 ft) lengths (5 rolls per box)

4C-4057 Tube, 7.9 mm (5⁄16 inch) O.D. by 2.1 m (7 ft) length (250 per box)

4C-4055 Tube, 6.35 mm (1⁄4 inch) O.D. by 2.1 m (7 ft) length (250 per box)

177-9343 Probe and Cap Group

8C-3345 Oil Sampling Valve

8C-3446 Oil Sampling Valve

8C-3445 Dust Cap (Engine)

8C-3447 Dust Cap (Transmission)

8C-3451 Dust Cap (Hydraulic)

8C-8456 Sealed Cap

3J-7354 O-Ring Seal for 8C-3446 Valve

8T-7876 O-Ring Seal for 8C-3345 Valve

169-8373 Bottle Group

8T-9208 Purging Probe, brass

1U-5718 Vacuum Pump

1U-5719 Seal Kit for 1U-5718 Vacuum Pump

169-7372 Bottle, 114 g (4 oz)

169-7373 Bottle, 71 g (21⁄2 oz)

4C-4600 Mail Tube

1U-7648 Tube Cutter

1U-8589 Replacement Blades

1U-8757 Tube, 6.35 mm (1⁄4 inch) O.D. by 30.5 m (100 ft) length (5 rolls per box)

6V-0852 Dust Cap (Blank)

7X-3387 Oil Sampling Valve



op S

uppl

ies

02c.qxp 10/5/06 1:28 PM Page 114


Disposal and Storage Productsfor Hazardous Material

Shop Supplies

ID: C41579T1

Disposal and Storage Products for Hazardous Material

4C-3119 Funnel AttachmentWarranty: Manufacturer’s

• Large receiving opening expedites use• Flexible hose funnel assembly has spring clip for quick, easy attachment to cans• Tern plate funnel and metal hose provide grounding path to prevent static sparks

ID: C41526T1

Use with 19.375 liter can (5 gal)

Receiving opening diameter 114.3 mm (41⁄2 in)

Hose O.D. 23.8 mm (15⁄16 in)

Height 304.8 mm (12 in)

1B-7763 Pump Oil Can

• Capacity: 0.3 liter (10 oz)• Size: 76.2 mm (3 in) diameter, 254 mm (10 in) tall

268-5809 Funnel KitWarranty: Manufacturer’s

• Includes:- one 1-pint funnel- two 1-quart funnels

ID: D01615T1

268-5814 FunnelWarranty: Manufacturer’s

• Length: 457.2 mm (18 in)• Material: plastic

ID: We have a photo.

4C-3238 Drum Tilt CradleWarranty: Manufacturer’s

• Useful in all areas where flammable liquids are stored in drums and dispensed from faucets

• Use with 114 or 208 liter drums (30 or 55 gal)

• Enables one person to move, load, and unload full drums

• Rugged and durable steel• Positions faucet approximately

482 mm (19 in) from floor• Shipped unassembled• Test lab listing: FM

1U-6156 Barrel Cover

• Used to cover open or closed top drums — cover snaps onto top of drum• Supports the Caterpillar contamination control efforts• Protects drum contents from water induction when stored outside• Keeps drum top clean and contents ready for use• Made of long lasting, low density polyethylene — resistant

to petroleum-based fluids and ultraviolet rays• 10 covers per package

ID: C66952T1

KEEPITCLEAN

KEEP IT CLEANKEEP

ITCL

EAN

RE

USABLE DRUMCO

V

ER

FLUIDS

®�

Material thickness 1.5 mm (.06 in)

Inside diameter 571 mm (22.5 in)

Color Yellow

02c.qxp 10/5/06 1:28 PM Page 115


Tape and Tape Dispensers

General Purpose Masking Tape

• Can be used for holding, bundling, sealing, tabbing non-critical masking and many other miscellaneous applications where an economical grade of paper tape is needed

ID: C34476T1

Part No. Size — 55 m (60 yd) rolls Rolls/Case

4C-6570 19 mm (3⁄4 in) 48

4C-6571 25.4 mm (1 in) 36

4C-6572 51 mm (2 in) 24

4C-6573 76.2 mm (3 in) 12

Masking Paper

• Specially formulated, high density masking paper that helps reduce labor cost, decreases rework, and minimizes cleanup

• Its unique, virtually “pinhole-free” construction delivers exceptional paint and solvent resistance to help eliminate bleed-through

• For protection, each roll is individually wrapped• The paper’s balanced construction offers

conformability, strength, and easy handling

ID: C33574T1

Part No. Description Size Rolls/Case

1U-9731 Masking Paper 76.2 mm x 304.8 m 6(3 in x 1000 ft)




Masking Tape

• Six sizes available — 13 mm (1⁄2 in) to 76.2 mm (3 in) wide, 60 yd. roll• Clean removal — less adhesive transfer reduces residue which can stick to work surface• Sharp paint edge — thin, smooth backing gives a superior, straight paint line with no jagged edges• One-piece removal — balanced construction allows for one-piece removal• Heat resistant — will generally function well in conditions up to 93° C (200° F)

ID: C33573T1

Part No. Size — 55 m (60 yd) rolls Rolls/Case

1U-6705 13 mm (1⁄2 in) 72

1U-6706 19 mm (3⁄4 in) 48

1U-6707 25.4 mm (1 in) 36

1U-6708 51 mm (2 in) 24

1U-6709 63.5 mm (21⁄2 in) 12

1U-6710 76.2 mm (3 in) 12

Tape and Tape Dispensers Material Handling, Storage,Packaging, and Shipping

Shop

Sup

plie

s

ID: D01203T1

263-0881 Label Protection Tape

• Used for covering address labels, packing lists, and sales slips when protection against rough handling is needed

• Aggressive water-based acrylic adhesive• Resistant to UV light and chemicals• Adhesion to steel: 17.9 N/cm (16 oz/in)• Tensile strength: 0.32 kg/mm (18 lb/in)• Thickness: 0.04 mm (1.6 mils)• Size: 96.01 mm x 659.9 m (3.78 in x 216.5 feet) roll• Material: polypropylene• Package quantity: 18 rolls per case

02c.qxp 10/5/06 1:28 PM Page 116


Material Handling, Storage,Packaging, and Shipping

Tape and Tape DispensersShop Supplies

ID: D01401T1

ID: D01395T1

ID: C33565T1

4C-4094 Filament Tape

• Stain resistant and transparent with reinforced continuous glass yarn filaments• Used for closure and reinforcement of corrugated fiberboard boxes and performs well in holding,

reinforcing, combining, bundling, and unitizing applications• Size: 19 mm (3⁄4 in) x 55 m (60 yd) roll• Package quantity: 48

ID: C33566T1

263-0883 Filament Tape

• Fiberglass reinforced tape excellent for light-duty applications such as strapping, palletizing, and packaging

• Adhesion to steel: 8.5 g/mm (78 oz/in)• Elongation: 8%• Tack: 12.7 cm (5 in)• Tensile strength: 1.71 kg/mm (95.6 lb/in)• Thickness: 0.099 mm (3.9 mils)• Size: 8.89 mm x 548.64 m (0.35 in x 180 feet)• Package quantity: 96 rolls per case

4C-4095 Transparent Tape

• Good for general purpose packaging needs• Was developed primarily for single strip closure of regular slotted containers• Has very good resistance to edge tear and splitting due to shock from impact• Adhesive sticks at a touch to fiberboard• Size: 48 mm (2 in) x 100 m• Package quantity: 36

263-0877 Double-faced Tape

• Multipurpose tape for general mounting and holding• Can be used to reattach interior cab material or head liners, sound proofing

material, etc.• Extremely aggressive adhesive• Silicone-coated polyethylene release liner makes unwinding easy• Peels clean leaving minimum residue• Adhesion to steel:

44 g/mm (40 oz/in)• Tack: 5.1 cm (2 in)• Tensile strength:

0.36 kg/mm (20 lb/in)• Thickness: 0.28 mm (11 mils)• Size: 51 mm x 22.9 m

(2 in x 25 yards) roll• Package quantity: 24 rolls per case

263-0879 Thread Seal Tape

• Multipurpose non-adhesive thread seal tape used for many maintenanceapplications

• Polytetraflouroethylene (PTFE) self lubricates joints for a leak-proof seal• Easy to assemble and disassemble threaded joints when tape is applied• Thickness: 0.09 mm (3.5 mils)• Size: 13 mm x 76.2 m (0.5 in x 250 feet) roll• Color: white• Material: polytetraflouroethylene• Package quantity: 200 rolls per case

ID: D01389T1

02c.qxp 10/5/06 1:28 PM Page 117

ID: D00935T1ID: A69878T1

ID: C44126T1ID: A06141-1T1

190-9792 Duct TapeWarranty:

• Use this silver, polyethylene-coated, cloth tape for sealing and/orwaterproofing applications

• Has an extremely tough rubber adhesive• Size: 51 mm (2 in) wide

and 55 m (60 yds) long• Package quantity: 1

9U-5922 High Performance Duct Tape

• Use this olive drab, polyethylene-coated, cloth tape for sealing and/or waterproofing applications

• Conforms to mil spec PPP-T-60D• Rubber adhesive adheres securely• Thickness: 12 mils• Tensile strength: 42 lbs per inch• Size: 51 mm wide x 55 m long

(2 in wide x 60 yd long)• Package quantity: 1

1P-0810 Electrical Tape

• Premium quality vinyl tape with many electrical insulation applications• Size: 19 mm x 20.12 m long (3⁄4 in wide x 66 ft long)• Package quantity: 10

235-8598 Electrical TapeWarranty: Manufacturer’s

• Quality, black, vinyl tape with excellent electrical insulation properties• Size: 19 mm x 18.3 m long (3⁄4 in wide x 60 ft long)• Package quantity: 10

Aluminum Tape

• A variety of sizes of aluminum tape that can be used to seal openings of various machine components such as cylinder assembly tubes during shipping and storage

• Also useful to seal pump ports and other openings• 3.5 Mil thick• Tough but flexible• Hi-tack• Waterproof

ID: C68819T1


9U-6910 Aluminum Tape 63.5 mm x 45.7 m (21⁄2 in x 50 yds)

9U-6911 Aluminum Tape 101.6 mm x 45.7 m (4 in x 50 yds)




Tape and Tape Dispensers Material Handling, Storage,Packaging, and Shipping

Shop

Sup

plie

s

02c.qxp 10/5/06 1:28 PM Page 118



Tape and Tape DispensersShop Supplies

ID: C33571T1

ID: C33569T1

ID: C33570T1

ID: C33568T1

4C-4099 Box Sealing Tape Dispenser

• Provides quick, easy method for dispensing 4C-4095 Transparent Tape, or any other film-backed box sealing tape directly from the roll

• Hand-held and portable — excellent on center seam sealing of regular slotted boxes

• Sturdy, durable, easy to load and operate; handles tape widths from 38 mm (11⁄2 in) to 51 mm (2 in)

• Package quantity: 1

4C-4100 Filament Tape Dispenser

• Fast and economical clips of 4C-4094 Filament Tape can be applied• Dispenser cuts and buffs tape with one-hand motion• Features hand brake in the core that allows operator to adjust tension

for tighter box reinforcement and bundling applications• High impact plastic and one piece construction makes the dispenser

very durable• Handles filament tapes up to 19 mm (3⁄4 in) wide• Package quantity: 1


• Features a hand brake in the core that allows operator to adjust tension fortighter box reinforcement and bundling applications

• Made from high impact, durable plastic• Handles 4C-4094 Filament Tape• Package quantity: 1


• Durable metal dispenser for carton taping• Holds 55 m (60 yd) roll of filament tape• Portable, refillable in seconds• Package quantity: 1

4C-6392 Rubber Mastic Tape

• 51 mm (2 in) wide X 1.7 mm (.065 in) thick by 3 m (10 ft) long rolls• Great for quick buildup for moisture seal, for insulation, and for cushion on cable harness and wires• Sticks fast, seals fast and stays tight• Molds easily around irregular surfaces while holding its position through a range of temperatures• 1 roll per package

ID: C34418T1

02c.qxp 10/5/06 1:28 PM Page 119


ID: C34477T1ID: C34407T1

Packaging Material and Accessories

Handwrappers

• Full rolls to 558.8 mm (22 in) wide• Fits 76.2 mm (3 in) core• Heavy duty mast• Ball bearings• Adjustable tension• Ring rotates freely• Foam grip

ID: C34409T1

4C-4776

Part No. Description Use

4C-4776 Handwrapper all 279 mm (11 in), 400 mm (15.75 in), 457 mm (18 in) filmswith 76 mm (3 in) cores

4C-4777 Handwrapper all 279 mm (11 in), 692 mm (27.25 in), 457 mm (18 in) filmswith 57 mm (2.25 in) and 76 mm (3 in) cores

4C-4779 Adjustable Stretch Band-it Tool

• Fully mechanical• Adjustable stretch control• No spare parts—no parts to replace

or wear out• Use with 4C-4880 Film

4C-4780 Stretch Band-it Tool

• “Hand Squeeze” control• No assembly, no maintenance, no additional adhesives• Use with 4C-4880 Film

4C-4781 Stretch Band-it Stand

• Portable• Mounts on any table surface• Accommodates up to 16 kg (35 lbs)• Adjustable zinc-plated support• Allows wrapping of smaller items using 4C-4880 Film and 4C-4779 or 4C-4780 Stretch Band-it Tools

ID: C34408T1

4C-4880 Heavy-Duty Master Wrap Film

• Holds anything, any shape, anywhere• Applicator packed in all cases• Heavy-duty gauge

Packaging Material and Accessories Material Handling, Storage,Packaging, and Shipping

Shop

Sup

plie

s

ID: C41596T1

Rolls/ Film Film Roll FilmPart No. Case Gauge Width Length Color

4C-4880 12 135 127 mm (5 in) 198 m (650 ft) Blue

02c.qxp 10/5/06 1:28 PM Page 120



Packaging Material and AccessoriesShop Supplies

ID: C54434T1

Stretch Film

• Revolutionary performance standard —one of the strongest films in the industry• Cast formula• Stiff high force• No neck-down films• Has highest holding-force-to-load possible without breaks• Visually able to see through to wrapped product

ID: C41597T1

Rolls/ Film Roll FilmPart No. Case Width Length Color

291-6711 4 279.4 mm 457 m Clear(11 in) (1500 ft)

291-6710 4 457.2 mm 457 m Clear(18 in) (1500 ft)

293-2978 Hand Wrap Standard-Duty Stretch Film

• Convenient stretch film system• Extra wide—508 mm (20 in) compared to 457.2 mm (18 in)• Standard-duty gauge

Rolls/ Film Roll FilmPart No. Case Width Length Color

293-2978 4 508 mm 305 m Clear(20 in) (1000 ft)

Heat Shrink Bags

• Strong durable plastic excellent for pallet unitization and load retention• Ensures product will arrive at destination clean and undamaged• To determine the size of opening for gusseted bags, add the width and depth• UVI protection will protect bag from sun damage in outdoor storage.

ID: D01864T1

Part No. Size (width x depth x height) Thickness Quantity

Gusseted Heat Shrink Bag

270-5329 800 x 495 x 710 mm (31.5 x 19.5 x 28 in) 5 mil 135 bags/roll

270-5331 1257 x 495 x 1370 mm (49.5 x 19.5 x 54 in) 5 mil 65 bags/roll

Size (width x height)

Flat Heat Shrink Bag

270-5332 1 2438 x 1829 mm (96 x 72 in) 5 mil 35 bags/roll

270-5333 1 3810 x 2970 mm (150 x 117 in) 5 mil 15 bags/roll1 5% UVI

Heat Shrink Sheeting

• Strong durable plastic excellent for pallet unitization and load retention• Ensures product will arrive at destination clean and undamaged• 5% UVI protection will protect bag from sun damage in outdoor storage

ID: D01864T1

Part No. Roll Size Thickness Color Quantity

270-5334 5.5 x 61 m (18 x 200 ft) 7 mil white 1 roll

270-5335 914 mm x 198 m (36 in x 650 ft) 5 mil clear 1 roll

270-5336 1.37 x 198 m (54 in x 650 ft) 5 mil clear 1 roll

02c.qxp 10/5/06 1:28 PM Page 121

Cardboard Boxes with Cat Logo

• Material: corrugated paperEdge CrushNumber

Part No. Size (length x width x depth) (ECT) Quantity

270-5348 213 x 213 x 210 mm (8.4 x 8.4 x 8.3 in) 32 lb 25 per package

270-5349 254 x 203 x 170.8 mm (10 x 8 x 7 in) 32 lb 25 per package



270-5352 356 x 356 x 229 mm (14 x 14 x 9 in) 32 lb 10 per package

270-5353 648 x 648 x 503 mm (25.5 x 25.5 x 19.8 in) — 1 5 per package1 400 pounds per square inch bursting test

Plastic Bags with Cat Logo

• Two-color Caterpillar logo on front, clear on the back• Great for parts storage and shipping• Exceptional strength• Material: linear low density polyethylene (LLDPE)

ID: D01876T1

Part No. Roll Size Thickness Quantity

270-5337 305 x 457 mm (12 x 18 in) 3 mil 1000 bags/carton



Zipper-Top, Clear Bags for Contamination Control

• Exceptional strength• Plastic slider top for easy opening and closing• Material: linear low density polyethylene (LLDPE)

ID: D01882T1

Part No. Size Thickness Quantity



High Performance Steel Strapping

• Great for stabilizing heavy loads during transportation• Break strength: 972.2 kg (2150 lbs)



Shop

Sup

plie

s

Part No. Size Thickness Quantity

270-5343 19 mm x 624.8 m (3⁄4 in x 2050 ft) 0.5 mm (0.020 in) 12 coils/pallet

ID: D01888T1

02c.qxp 10/5/06 1:28 PM Page 122




ID: C34406T1

Strapping Seals

• Easy to use strapping buckles• Holds tension strong for nylon poly strapping• Used with 270-5345 Nylon Cord Strapping, 12.7 mm (1⁄2 in) wide

ID: D01894T1


270-5344 12.7 mm (1⁄2 in) 1000 buckles per carton

High Performance Nylon Cord Strapping

• Economical alternative to steel strapping• Easy to use on a wide range of products• Used with 270-5344 Strapping Seals, 12.7 mm (1⁄2 in)• Breaking strength: 272.1 kg (600 lbs)

ID: D01900T1

Part No. Size Color Quantity

270-5345 12.7 mm x 1188.7 m (1⁄2 in x 3900 ft) White 4 rolls per box

4C-4515 Shrinkfast Shrink GunWarranty: Manufacturer’s

• Portable — 3.5 lbs• Fast — shrinkwrap a 1016 mm x 1219.2 mm x 1524 mm (40 in x 48 in x 60 in) pallet in less than two minutes• UL listed• Fast shrinkwrapping — the shrink gun is faster and holds more securely than either stretch-wrapping or banding• Versatile — the shrink gun can be used on machinery, bagged products, boxes, pallets, construction materials, chemicals, petroleum containers, metals cabinets, and

shelving• Safe — operates with a safety latch trigger to prevent unintentional firing and shuts off automatically when put down• Product support — repair parts are available through the Caterpillar Parts Distribution system

Heat capacity 125,000 BTU/hr.

Propane usage 2.59 kg/hr (5.7 lbs/hr)

Operating pressure 22 PSIG

Air consumption 21 CFM

Repair Parts (Warranty: Six Months)


4C-4511 Fuel Line

4C-4512 Valve Assembly

4C-4513 Hose Adapter

4C-4514 Spark Plug

4C-4516 Regulator Assembly

4C-4517 Gauge (Pressure)

4C-4518 U.L. Guard

02c.qxp 10/5/06 1:28 PM Page 123

263-0880 Masking Paper

• Excellent adhesion to all masking tapes• Standard production grade 40 pound basis weight, pinhole free• One inch core fits standard masking paper dispensers• Size: 914.4 mm x 304.8 m (36 in x 1000 feet) roll• Withstands oven temperatures of 325° F• Color: green

ID: D01335T1

263-0891 Poly Coat Paper

• Used for protecting metal parts and tools, metal sheeting interleaving, protecting goods on pallets from moisture and debris• Fifty pound virgin kraft paper with 10 pound polycoating• Heavy duty protection from water, grease, and oil• Fits standard dispenser — 3-inch core with plugs that reduce it to 1 inch• Size: 914.4 mm x 274.3 m (36 in x 900 feet) roll

ID: D01179T1

Cable Ties and ApplicatorsWarranty: Six Months (applicators)

• Used to secure wires, cables, tubes, etc.

ID: C44294T1

Bundle Strap Pkg. InstallerItem Part No. Diameter Range Length Width Qty. (Item 1)

2 1S-9593 1.5 mm to 15.7 mm (.06 in to .62 in) 88.9 mm (3.50 in) 2.5 mm (.100 in) 100 1U-52282 8L-8413 1.5 mm to 28.4 mm (.06 in to 1.12 in) 134.6 mm (5.3 in) 3.8mm (.150 in) 200 1U-5228

3 3S-2093 1.5 mm to 44.5 mm (.06 in to 1.75 in) 170.2 mm (6.7 in) 4.9mm (.194 in) 500 1U-5228

4 6K-0806 1.5 mm to 101.6 mm (.06 in to 4.00 in) 355.6 mm (14.0 in) 4.9mm (.194 in) 250 1U-5228

5 341432 1.5 mm to 203 mm (.06 in to 8.00 in) 698.5 mm (27.5 in) — 1 —

6 7K-1181 4.8 mm to 101.6 mm (.19 in to 4.00 in) 355.6 mm (14.0 in) 7.9mm (.310 in) 100 1U-5227

7 5P-5148 44.5 mm to 120.6 mm (1.75 in to 4.75 in) 510.5 mm (20.1 in) 12.7 mm (.500 in) 100 —

8 6V-7555 44.5 mm to 305 mm (1.75 in to 12.00 in) 1018.5 mm (40.1 in) 12.7 mm (.500 in) 1 —

Not shown 240-1678 12.7 mm to 79.4 mm (0.5 in to 3.125 in) 279 mm (11 in) 4.8 mm (.190 in) 1000 —



Shop

Sup

plie

s

4C-5877 Electric Tie Strap Tightener

• Tightens cable ties and cuts off excess when preset tension is attained• Used with straps, harnesses, and hoses• Has a comfortable grip and handle for all hand sizes• Tightens up to 12.7 mm (1⁄2 in) wide straps• Weight: 454 g (16 oz)

02c.qxp 10/5/06 1:28 PM Page 124




9U-7918 Label Maker KitWarranty: Manufacturer’s

• Create metal labels that stand up to harsh weather, temperature and corrosion• For tagging hoses, castings, engine components, pipes, etc.• Heavy-duty cast aluminum body construction• Built-in hole punch• Front scissors cut-off—cuts tape exactly where required• Tape advance and rewind control• Wheel characters-selection window helps reduce embossing errors• Also embosses 12.6 mm (1⁄2 in) vinyl tape

ID: C81379T1

9U-7918 Label Maker Kit


Label maker

9U-7919 Character Wheel, A-Z, 2-9 Character height 4.8 mm (188 in)

9U-7920 Aluminum Tape Roll, no adhesive 1⁄2 in x 16 ft

Black vinyl tape roll 12.6 mm x 3.66 m (1⁄2 in x 12 ft)

Optional

Part No. Description Quantity Size

9U-7920 Aluminum Tape Roll, no adhesive 10 per box 12.7 mm (1⁄2 in) x 4.88 m (16 ft) x 0.1524 mm (0.006 in thick)

9U-7921 Aluminum Tape Roll, with adhesive 10 per box 12.6 mm (1⁄2 in) x 3.66 m (12 ft) x 0.33 mm (0.13 in thick)

9U-7922 Stainless Steel Tape Roll, no adhesive 10 per box 12.7 mm (1⁄2 in) x 6.41 m (21 ft) x 0.127 mm (.005 in thick)

9U-7923 Date/Time StampWarranty: Manufacturer’s

Multi-functional date/time stamp is also a full-featured digital alarm clock and a quick-reference desk calendar.

Size: 76.2 mm (3 in) H x 104.8 mm (41⁄8 in) W x 44.45 mm (17⁄8 in) D

Comprehensive Stamping Functions• Prints any combination of date, time, and 7 different status messages (IN, OUT, PAID, FILE, REF, CFMD, RCVD) providing

many varied options for identifying documents• Prints 4-digit or 6-digit sequential numbers as part of date/time/message, or independently, for even more versatility• Programmable security code prevents tampering, ensures stamping accuracy

Easy-Read Digital Alarm Clock• Displays hour, minute, AM/PM in large characters for at-a-glance reference• “Bell” icon indicates when daily alarm is activated

Pre-Programmed Calendar• Gives month, date, year, day of week• Programmed 200 years into the future with automatic leap-year adjustment

ID: C81380T1

02c.qxp 10/5/06 1:28 PM Page 125


Janitorial Products

Brooms

Push Broom• 100% Select black tampico• Clear lacquered half-round hardwood block• Recommended for dry sweeping semi smooth floors• Handle not included

Handle• Selected hardwood with clear lacquered finish• One end rounded and other end equipped with crimped on metal thread

to fit standard floor brush blocks

Whisk Broom• Made of selected fine broom corn• Sewn twice for strength• Plated ring cap

ID: D00814T1

Part No. Description Size Qty

263-0794 Push Broom 609 mm (24 in) wide 1

263-0796 Broom Handle 23.8 x 1524 mm (15⁄16 x 60 in) 1

263-0799 Whisk Broom 138 cm (15 in) long 1

Janitorial Equipment

Janitorial Bucket• Side pressure wringer• 7.6 cm (3 in) casters• Color: yellow• Size: (L x W x H) 33 x 33 x 68.6 cm (13 x 13 x 27 in)

Mop Heads• Lay-flat style• Screw-type mount• Use with 264-4364 Mop Handle

Mop Handle• Lay-flat style• Screw-type mount• Metal cap

ID: D00685T1Part No. Description Material Size Qty.

264-4360 Janitorial Bucket rubber 33.1 l (35 qt) capacity 1

264-4361 Rayon Mop Head 4-ply rayon 0.9 kg (32 oz) 1

264-4363 Cotton Mop Head 4-ply cotton 0.68 kg (24 oz) 1

264-4364 Mop Handle hardwood 152.4 cm (60 in) long 1

Trash Can or Waste Receptacle Liners

• Plastic, super durable trash can liners with superior stretch and tear resistance• Bottom designed for added strength and greater leak resistance

ID: D01197T1

Janitorial Products Material Handling, Storage,Packaging, and Shipping

Shop

Sup

plie

s

QuantityPart No. Strength Capacity Liner Size per Roll

263-0885 Medium 57 l 60.96 cm x 81.28 cm 500(10-12 micron) (15 gal) (24 in x 32 in)

263-0886 Heavy 125 l 83.82 cm x 99.06 cm 250(12-14 micron) (33 gal) (33 in x 39 in)

263-0887 Extra-Heavy 208 l 91.44 cm x 144.78 cm 200(15-17 micron) (55 gal) (36 in x 57 in)

02c.qxp 10/5/06 1:28 PM Page 126



Janitorial Products / LaddersShop Supplies

ID: D00784T1

Heavy Duty Garbage Bags

• Made from the highest quality raw materials• Mineral reinforced to enhance physical properties• Exceptional strength• Performance bottom seal resists leakage• Individually-folded in space-saving packaging

ID: D01870T1

Part No. Size Capacity Color Quantity

270-5346 1092 x 1193.8 cm (43 x 47 in) 22.7 kg (50 lb) HMW-HDPE Gray 100 bags/case212 l (56 gallon)

Ladders

Step Ladders and Shelf Ladders

Step Ladder• Fiberglass nonconductive industrial step ladder designed for everyday use• Extra heavy-duty, 136 kg (300 lb) weight rating• Thick non-marring rubber tread provides a slip resistant footing• Wide back braces provide maximum stiffness and discourages unsafe climbing• Full channel fiberglass rails are covered with a polyester veil for years of service• Double-rivet step construction with tubular steel rivets for maximum strength• Nonconductive structural molded top with tool slots is extremely durable

(slots help keep tools close at hand)• Spreader braces are located inside rails to help protect them from getting

hooked or damaged in transit• Reinforced bottom back brace provides additional strength to bottom of ladder

Shelf Ladder• Aluminum industrial shelf ladder for everyday industrial use• Extra heavy-duty, 136 kg (300 lb) weight rating• Steps are level when ladder is set at 72 degrees• Equipped with thick rubber bumpers extending 152 mm (6.0 in) from top

of ladder down side rails• Two pair of heavy duty steel gussets support bottom step• Angled feet with thick rubber thread on both legs provide sure footing• Each step is secured with solid aluminum rivets for maximum strength

Part No. Description Height Step Size Bottom Width Approx. Spread Approx. Weight

263-1030 Step Ladder 1.2 m (4 ft) 7.6 cm (3 in) 48 cm (18 7⁄8 in) 71 cm (28 in) 5.9 kg (13 lbs)

263-1031 Step Ladder 2.4 m (8 ft) 7.6 cm (3 in) 63 cm (24 7⁄8 in) 132 cm (52 in) 12.2 kg (27 lbs)

263-1019 Shelf Ladder 1.8 m (6 ft) 7.6 cm (3 in) 39 cm (15 1⁄4 in) — 4.5 kg (10 lbs)

263-1022 Shelf Ladder 2.4 m (8 ft) 7.6 cm (3 in) 39 cm (15 1⁄4 in) — 7.7 kg (17 lbs)

02c.qxp 10/5/06 1:28 PM Page 127


ID: D01834T1

Hardware and Seal Kits

Hardware Bin Kits

• Thirteen kits for customers who want to stock hardware bins for their service departments and/or service vehicles with various quantities of popular sizes of Cat bolts, nuts, and washers

• Hardware packaged in resealable plastic clamshell packages• Smaller easy-to-use packages offer convenience for the service technician

Part No. Thread Coating Contains Pieces Bolt Head

3E-6640 Inch - Coarse Phosphate and oil 59 Part Numbers 1735 Hex

3E-9420 Inch - Coarse Phosphate and oil 38 Part Numbers 1975 Hex

3E-9421 Inch - Fine Phosphate and oil 38 Part Numbers 1650 Hex

3E-9422 Metric - Coarse Phosphate and oil 38 Part Numbers 1580 Hex

222-9998 Inch - Coarse Zinc dichromate 59 Part Numbers 2175 Hex

222-9999 Inch - Coarse Zinc dichromate 38 Part Numbers 1520 Hex

223-0000 Metric - Coarse Phosphate and oil 56 Part Numbers 1965 Hex

223-0001 Metric - Coarse Zinc dichromate 56 Part Numbers 1985 Hex

223-0002 Metric - Coarse Zinc dichromate 38 Part Numbers 1510 Hex

223-0003 Inch - Coarse Phosphate and oil 38 Part Numbers 1420 Socket

223-0004 Metric - Coarse Phosphate and oil 38 Part Numbers 1420 Socket

222-9996 Inch - Coarse Phosphate and oil 38 Part Numbers 1420 12-Point

222-9997 Inch - Fine Phosphate and oil 40 Part Numbers 1570 12-Point

Hardware Shop/Field Kits

• Five kits for small repair shops or field service vehicles• Contain assortments of popular sizes of Cat bolts with matching washers and nuts, in phosphate and oil coatings• Hardware packaged in a rugged metal box with hinged metal cover and latch• Inch hardware kits come in two sizes, small and large, depending on the quantity of hardware in the kit

Part No. Thread Coating Size Contains Pieces

178-2207 Inch - Fine Phosphate and oil Large 24 Part Numbers 476

178-2208 Inch - Fine Phosphate and oil Small 29 Part Numbers 894

178-2209 Inch - Coarse Phosphate and oil Small 27 Part Numbers 502

178-2210 Inch - Coarse Phosphate and oil Large 34 Part Numbers 936

178-2211 Metric - Coarse Phosphate and oil Small 32 Part Numbers 630

Hardware and Seal KitsSh

op S

uppl

ies

Convenient Hardware Packages

• Hardware packaged in resealable plastic clamshell packages• Product includes inch and metric bolts, nuts, washers, hose clamps, cable ties, electrical fuses, and cotter pins• Smaller easy-to-use packages offer convenience for the service technician

ID: D00499T1

Consists of:Retail Package Retail BulkPart No. Description Pkg. Qty. Part No.

247-0188 1⁄4-20 x 1⁄2 in Hex Head Bolt 50 0S-1614


247-0190 1⁄4-20 x 1 in Hex Head Bolt 50 0S-1616

247-0191 1⁄4-20 x 1 1⁄4 in Hex Head Bolt 50 7B-2742

247-0192 1⁄4-20 x 1 1⁄2 in Hex Head Bolt 25 9F-7022


247-0194 1⁄4-20 x 2 in Hex Head Bolt 25 8B-2377

247-0195 1⁄4-20 x 2 1⁄4 in Hex Head Bolt 25 1D-4533


247-0197 1⁄4-20 x 2 3⁄4 in Hex Head Bolt 25 2A-4781


247-0199 1⁄4 in Hard Washer 25 5P-0537

247-0200 1⁄4 in Lock Washer 100 3B-4504

247-0201 1⁄4-20 Full Nut 50 9S-8750

247-0202 5⁄16-18 x 1⁄2 in Hex Head Bolt 50 1C-0569



02c.qxp 10/5/06 1:28 PM Page 128


Hardware and Seal KitsShop Supplies









247-0212 5⁄16-18 x 3 in Hex Head Bolt 10 1D-4541

247-0213 5⁄16 in Hard Washer 25 9M-1974

247-0214 5⁄16 in Lock Washer 100 3B-4505

247-0215 5⁄16-18 Full Nut 50 5S-0003

247-0216 3⁄8-16 x 1⁄2 in Hex Head Bolt 50 4F-4879



247-0219 3⁄8-16 x 1 1⁄4 in Hex Head Bolt 25 0S-1588




247-0223 3⁄8-16 x 2 1⁄4 in Hex Head Bolt 10 0L-2070

247-0224 3⁄8-16 x 2 1⁄2 in Hex Head Bolt 10 0L-1143

247-0225 3⁄8-16 x 2 3⁄4 in Hex Head Bolt 10 0T-0573


247-0227 3⁄8 in Hard Washer 25 5M-2894

247-0228 3⁄8 in Lock Washer 100 3B-4506

247-0229 3⁄8-16 Full Nut 50 9S-8752

247-0230 1⁄2-13 x 1⁄2 in Hex Head Bolt 25 1K-6705






247-0236 1⁄2-13 x 2 in Hex Head Bolt 10 1A-1460




247-0240 1⁄2-13 x 3 in Hex Head Bolt 5 0L-1329

247-0241 1⁄2 in Hard Washer 25 5P-8245

247-0242 1⁄2 in Lock Washer 50 3B-4508

247-0243 1⁄2-13 Full Nut 25 1F-7958

247-0244 5⁄8-11 x 3⁄4 in Hex Head Bolt 10 1H-9456





247-0249 5⁄8-11 x 2 in Hex Head Bolt 5 1A-1135





247-0254 5⁄8 in Hard Washer 10 5P-8247

247-0255 5⁄8 in Lock Washer 25 3B-4510

247-0256 5⁄8-11 Full Nut 10 4K-0367

247-0583 M6 x 1, 12 mm, Hex Head Bolt 50 8T-0639

247-0584 M6 x 1, 16 mm, Hex Head Bolt 50 6V-8837





247-0589 M6 x 1, 40 mm, Hex Head Bolt 25 2W-9499




247-0592 M6 Washer, Hex Head Bolt 50 9X-8267

247-0593 M6 x 1, Hex Nut 50 6V-8225

247-0594 M8 x 1.25, 16 mm, Hex Head Bolt 50 6V-5215






247-0600 M8 x 1.25, 45 mm, Hex Head Bolt 25 8T-0276



247-0603 M8 x 1.25, 70 mm, Hex Head Bolt 10 5P-8347

247-0604 M8 Washer 25 9M-1974

247-0605 M8 x 1.25, Hex Nut 50 5P-7970











247-0616 M10 Washer 25 6V-5839

247-0617 M10 x 1.50, Hex Nut 25 2Y-5829


247-0619 M12 x 1.75, 25 mm, Hex Head Bolt 25 6A-5591







247-0626 M12 Washer 25 5P-8245

247-0627 M12 x 1.75, Hex Nut 25 6V-8149

247-0698 Hose Clamp 54 mm -105 mm 2 5P-0598

247-0699 Hose Clamp 60 mm - 82 mm 2 5P-4868

247-0700 Hose Clamp 45 mm - 67 mm 2 5P-0597

247-0701 Hose Clamp 16 mm - 27 mm 5 5D-1026

247-0702 Hose Clamp 6 mm - 16 mm 6 1P-4278

247-0703 Hose Clamp 108 mm - 130 mm 2 5P-1717

247-0717 Cotter Pin 1⁄8 in x 1 in Lg 50 3B-4617

247-0718 Cotter Pin 1⁄8 in x 3⁄4 in Lg 50 3B-4615

247-0719 Cotter Pin 3⁄32 in x 1⁄2 in Lg 50 3B-4607

247-0720 Cotter Pin 1⁄8 in x 2 in Lg 50 3B-4621

247-0721 Cotter Pin 1⁄8 in x 1 1⁄4 in Lg 50 3B-4618

247-0749 Fuse (10 Amp) 5 3K-8782

247-0750 Fuse (15 Amp) 5 8M-8948

247-0751 Fuse (20 Amp) 5 8M-0456

247-0752 Mini Fuse (10 Amp) 5 113-8490

247-0753 Mini Fuse (15 Amp) 5 113-8491

247-0754 Mini Fuse (20 Amp) 5 113-8492

247-0755 Mini Fuse (25 Amp) 5 113-8493

247-0762 Cable Strap 170.2 mm (6.7 in) long 20 3S-20934.9 mm (.194 in) wide

247-0763 Cable Strap 355.6 mm (14 in) long 10 6K-08064.9 mm (.194 in) wide

247-0764 Cable Strap 355.6 mm (14 in) long 10 7K-11817.9 mm (.310 in) wide

02c.qxp 10/5/06 1:28 PM Page 129

ID: D00990T1

Bulk Threaded Rod

• Zinc-plated• Length: 0.9 m (3 ft)• Safety factor: 5

ID: D00702T1

Part No. Thread Maximum Load

261-6665 1⁄4 - 20 109 kg (240 lb)

261-6666 5⁄16 - 18 172 kg (380 lb)

261-6667 3⁄8 - 16 277 kg (610 lb)

261-6668 7⁄16 - 14 454 kg (1000 lb)

261-6669 1⁄2 - 13 513 kg (1,130 lb)

261-6670 5⁄8 - 11 822 kg (1,810 lb)

261-6671 3⁄4 - 10 1,230 kg (2,710 lb)

Check-a-Thread

• Quickly identifies hardware thread diameter and pitch• Four holes on mounting base for easy attachment to retail parts counter,

service shop tool crib, or field service truck


Hardware and Seal KitsSh

op S

uppl

ies

Dimensions (L x H x W) 609 mm (24 in) x 101 mm (4 in) x 76 mm (3 in)

MetricPart number 250-6866Range 16 mm-2.0 to 4 mm-.7No. of bolt sizes 15

InchPart number 250-6865Range 3⁄4-16 to #6-32No. of bolt sizes 21Sheet metal/wood screw sizes 5

9U-5155 O-Ring Measuring ConeWarranty: Six Months

Find the correct O-ring replacement faster and easier.• Designed to measure SAE industry standard O-ring dimensions (cross section and dash size).

These dimensions are published by the Society of Automotive Engineers (SAE).• 457.2 mm (18 in) tall, cone shaped• Material: high-impact, yellow plastic• Round base with five industry standard O-ring cross section diameters (widths) cut into the edge• Cone has 65 steps indicating varying inside diameters

ReferenceNEHS0571 Special Instruction, Cross-Reference List (identifies the proper Caterpillar O-ring part number)

ID: D01561T1

02c.qxp 10/5/06 1:28 PM Page 130


Chemicals, Lubricants, Adhesives, and PaintsAdhesives and Sealants . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Coolants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Leak Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23

Solvents and Lubricants . . . . . . . . . . . . . . . . . . . . . . . . 3-25

Specialty Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34

Paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38

03a.qxp 10/5/06 1:28 PM Page i

03a.qxp 10/5/06 1:28 PM Page ii

Chemicals, Lubricants, Adhesives, and Paints

Introduction

MSDS InformationMSDS Information for Caterpillar Chemicals/Lubricants/Adhesives can be found atwww.catmsds.com

Medical Emergency ContactsFor a medical emergency involving Caterpillar Chemicals/Lubricants/Adhesives, call:

800-458-5924 (in United States of America)303-893-1322 (in all other countries)

NOTE:Not all products are available worldwide. Some products have different partnumbers for Europe, Africa, Middle East, and Commonwealth of IndependentStates (EAME) dealers and customers to order due to specific hazardousmaterial label information required in EAME for these products. Productswhich require specific hazardous material labels in EAME may not be availablein all container sizes in EAME. “N/A” indicates a product which is not availablein EAME.

Adhesives and Sealants

Sealant Repair Kits

ID: C33317T1

Kit Consist

Part No.Part No. (EAME only) Description Size

4C-9507 185-3988 Retaining Compound 50 ml (1.69 fl oz)

7M-7456 185-3994 Bearing Mount 50 ml (1.69 fl oz)

9S-3263 185-3996 Thread Lock 50 ml (1.69 fl oz)

5P-3413 185-3992 Pipe Sealant 50 ml (1.69 fl oz)

169-5464 185-4004 Quick Cure Primer 133 ml (4.5 fl oz)

High Vibration Adhesive

• Bond wood, metal, glass, most rubbers and plastics — bond serial number plates to engine blocks, transmission, etc.; bond rear view mirrors

• Fast curing — handling strength in minutes; full strength in 2-4 hours• Heat resistant to 121°C (250°F)• High strength, vibration and oil resistant• Adhesive quantity: 25 ml (.85 fl oz)

ID: C79507T1


Adhesives and SealantsChem

icals, Lubricants, Adhesives, and Paints

Part No.Part No. (EAME only)

154-8874 185-4003

Part No.Part No. (EAME only)

173-0531 185-4005

03a.qxp 10/5/06 1:28 PM Page 1

1U-6142 Belzona® Kit for Block Repair

• Used for repair of pitting/cavitation erosion in engine blocks• Contains metal filled epoxy compounds to replace the metal which has been

eroded away by pitting/cavitation in engine blocks

1U-6140 (207-7532 EAME only) Belzona 1221 Super E-Metal• Can be molded or hand formed and machined after it is cured• At 25° C (77°F), has a 3 minute pot life• Can be machined after 35 minutes; has full mechanical properties

after 60 minutes; and can be immersed in chemicals after 20 hours

1U-6132 (207-7531 EAME only) Belzona 1311 Ceramic R Metal• Can be molded or hand formed but it must be machined with diamond

tooling or ground after it is cured• At 25° C (77°F), has a 15 minute pot life• Can be machined or ground after 1 hour; has full mechanical properties after

24 hours; and can be immersed in chemicals after 48 hours

1U-6136 (207-7530 EAME only) Belzona 1111 Super Metal• Can be molded or hand formed and machined after it is cured• At 25° C (77°F), has a 15 minute pot life• Can be machined after 1 hour; has full mechanical properties after 24 hours;

and can be immersed in chemicals after 48 hours

ReferenceSEHS8869 Special Instruction; contains instructions for making repairs to engineblocks with 1U-6132 Belzona® 1311 Ceramic R Metal

SELD0458 Reconditioning Bulletin for 3500 Cylinder Block Pitting; instructionsfor repairing water port damage with 1U-6132 Belzona 1311 Ceramic R Metal

SEBF8263 Reuse and Salvage Guide for 3500 Top Deck Repair on cylinderblocks; instructions for repairing top deck damage with 1U-6132 Belzona 1311Ceramic R Metal

ID: C66966T1

Come in handy plastic tool box; knives, spatulas, work surface and tool box are not serviced separately

Part No.Part No. (EAME only) Description Qty.

1U-6140 207-7532 Belzona 1221 Super E-Metal (125 gram) Kit 4

1U-6132 207-7531 Belzona 1311 Ceramic R Metal (2 Kg) Kit 1

1U-6136 207-7530 Belzona 1111 Super Metal (2 Kg) Kit 1

1U-6128 Reinforcement Tape (10 meter) 1

Knives (Plastic) 2

Work Surface (Plastic) 1

Spatulas (Plastic) 2

Instructions for Use 3

MSDS for all products in kit 6

NOTE: These products are packaged in kits to provide the correct ratio formixing. They must be mixed only in the correct ratio in order to get satisfactoryresults. The various bases and solidifiers are not serviced individually.Instructions for use of each of these compounds are included in the kit and the correct mix ratios are specified for each. If desired, the cure speed of the Belzona compounds can be accelerated by the application of heat. You canapply the heat by either heat lamps, ovens or heat guns.

Belzona® Kit for Challenger Track Belt Repair

• Used for repair cuts, tears and severe localized wear on the belt of the Challenger track• Contains durable and abrasion resistant two component elastomeric repair system for repairing,

rebuilding and protecting rubber and metal substrates• Belzona D&A can be handformed during application to conform to any contour. Cured material

may be dressed down or trimmed (as you would the base material).

Comes boxed as a kit; knives, spatulas and mixing bowls are not serviced separately


144-7779 Belzona 2111 D&A Hi-Build Elastomer Kit, 500 g unit (15.65 fl oz) 1

Knife 1

Spatula 1

Mixing bowl 1

Instructions, MSDS’s 1

Order separately: 144-7783 Belzona 2911 Q.C. Conditioner, 150 g unit

A 156-2732 Roughing Brush is available separately to assist in properlypreparing the edge of the area to be repaired. It is specially-designed to preparethe rubber surface prior to repair. (Service Part: 156-2733 Refill Teeth)

NOTE: These products are packaged in kits to provide the correct ratio formixing. They must be mixed only in the correct ratio achieved by carefullyemptying both the base and solidifier container. Do not open these containersuntil you are ready to complete the mixing and application. The material is notuseable after extended exposure to air. The base and solidifier are not servicedseparately. The 2911 Q.D. Conditioner is used as required to produce a thineven coat. It is serviced separately to enable replacement of out-of-date units.


Adhesives and SealantsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03a.qxp 10/5/06 1:28 PM Page 2

Loctite Quickmetal

• Adheres to metal and closes gaps of up to 0.5 mm (0.020 in) in diameter onshafts, housings, bearing spinouts, keyways, and splines

ID: D01645T1

Pkg.Part No. Size Qty.

269-1943 48.2 g (1.7 oz) tube 1

Thread Lock

• Removable strength• Breakaway torque — 12.995 N·m (115 in. lb)• Prevail torque — 5.989 N·m (53 in. lb)• Service temperature up to 149° C (300° F)• Medium Gap fill, up to 0.13 mm (0.005 in)• 10 minute fixture — 24 hour full cure time• Used to seal, lock in place, and prevent rust lock:

- Small bolts, set screws, terminal screws, deck plate cap screws, radiator guard bolts

- Roller guard rolls

ID: C79561T1

Part No.Part No. (EAME only) Size Qty

4C-4030 N/A 10 ml (.34 fl oz) 10

9S-3263 185-3996 50 ml (1.69 fl oz) 10

High Strength Thread Lock

• High strength — permanent• Breakaway torque — 25.99 N·m (230 in. lb)• Prevail torque — 36.16 N·m (320 in. lb)• Service temperature up to 149° C (300° F)• Medium Gap fill, up to 0.15 mm (0.007 in)• 10 minute fixture — 24 hour full cure time

ID: C79508T1

Part No.Part No. (EAME only) Size Qty

154-9731 N/A 10 ml (.34 fl oz) 10

155-0695 185-3998 50 ml (1.69 fl oz) 10

High Strength/High TemperatureRetaining Compounds

• High temperature capacity — 232°C (450°F)• Large gap fill .38 mm (0.015 in)• High shear strength — 21 mPa (3000 PSI)• Medium cure speed — cure time 2-4 hours• Seals/locks in place, augment slip fits on:

- Large bolts and studs- Lip seals and wear sleeves- Pins, gears and pulleys




ID: C79538T1

Part No.Part No. (EAME only) Size Qty.

4C-9506 N/A 10 ml (.34 fl oz) 10

4C-9507 185-3988 50 ml (1.69 fl oz) 5

1Y-3904 Clear Adhesive Sealant

• Holds seals in place during assembly• Contents comes in a syringe• Used for Single Cylinder Oil Test Engines (SCOTE)• Size: 20 ml (.68 fl oz)

Bearing Mounts

• High shear strength — 21mPa (3000 PSI)• Service temperature up to 149°C (300°F)• Medium gap fill, up to .13 mm (.005 in)• Fast cure speed — full cure time 1-2 hours

at room temperature• Used to seal, lock in place, augment press fits

and slip fits on:- Large bolts- Lip seals- Ball bearings in housings or on shafts- Thin wall bushings in housings- Sintered bearings- Plain bearings- Needle bearings- Core plugs- Wear sleeves- Cartridge pins

on loader linkages- Gears- Pulleys- Fan hubs

ID: C79516T1


4C-4032 N/A 10 ml (.34 fl oz) 10

7M-7456 185-3994 50 ml (1.69 fl oz) 5

03a.qxp 10/5/06 1:28 PM Page 3

Wicking Sealant

• Locks and seals fasteners after assembly• Low viscosity approximately 12 mPa (12 cP's)• Small gap Fill 0.1 mm (.004 inch) diametral• High shear strength 21 mPa (3000 PSI) on steel• Fast cure time 1 hr to full cure• High heat resistance — up to 149°C (300°F)• Low viscosity (almost as thin as water):

- makes this material ideal for sealing and locking tight press fits- allows this material to wick into joints that are already assembled, then cure in between

the mating parts to seal and lock parts in place, prevent loosening from vibration• Apply Wicking Sealant

- to screws in terminal strips on generator sets, lift trucks, on and off-road equipment to prevent loosening from vibration. (Normally the screws must be removed individually, cleaned, threadlocker applied and then the screws must be reinstalled

- to seal minor porosity in welded joints, castings, and die castings to prevent weeping/seeping type leaks. For best results, apply to suspect areas before they are contaminated with oils, etc.

ID: C44347T1


4C-9509 N/A 50 ml (1.69 fl oz) 10

Cyanoacrylate Adhesives

• Use for instant bonding on mated metal, plastic or rubber parts and assemblies• Good general purpose liquid ”super glue“• Fast curing and high strength• 153-9155 (black) has increased impact resistance• Store between 2˚C and 8˚C (35.6˚F to 46.4˚F)• Gap fill: 0.0762 mm (0.003 inch) for clear and 0.15 mm (0.006 inch) for black• Size: 3 g (.105 oz)• See Material Safety Data Sheet (MSDS) for additional information

ID: D01269T1

Part No. Color

157-7228 Clear

152-9155 Black

Cement

• Bond, seal or patch• Bond cork, leather, rubber, metal — bond headliners and wall insulation

in cabs• Contains flammable

solvent



emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

ID: C44114T1


5H-2471 185-4591 236 ml (8 fl oz) 12

222-3113 General Purpose Spray Adhesive

• Works on metal, foam, or decals• Does not require a catalyst• Short open time• Convenient aerosol application• Excellent general purpose adhesive• Quickly fixes problems in the shop or field• Size: 340 g (12 oz)

ID: D00635T1

03a.qxp 10/5/06 1:28 PM Page 4

ID: C79562T1

143-9508 Epoxy Adhesive143-9509 Nozzle Mixer143-9510 Applicator143-9511 Plunger ReplacementModel: 3500 Engines

• Fast cure adhesive• 30 minute handling strength

Shear strength 2500 PSI

Pot life 9 minutes

Mix ratio 1:1

Size 48.2 g (1.07 oz)

Plexus MA 300

• General purpose, semi-flexible adhesive

• Bonds most unprepared common plastics (ABS, PVC, acrylic)

• Also bonds fiber-reinforced composites and metals

Working time 4 to 6 minutes

Fixture time 12 to 15 minutes

Shear strength 3000 to 3500 PSI

Size 50 ml duo pack syringe

Part No.Part No. (EAME only) Size

209-0987 211-2679 50 ml (1.69 fl oz)

Pipe Sealant w/Teflon

• Very low shear strength; large gap fill• Service temperature up to 149°C (300°F)• Very slow cure speed• Seal and lock tapered pipe plugs, nipples,

and fittings

ID: C79515T1


5P-3413 185-3992 50 ml (1.69 fl oz) 10

Quick Cure Primer

• Removes grease and oil from surface• Reduces cure time on anaerobic sealants and adhesives such as thread lock, retaining compound, and bearing mount• Convenient aerosol application• Single-component, non-CFC solvent-based surface activator• Use when temperature is below 15°C (59°F)

ID: C80053T1




266-3144 Epoxy Mixer Cup Kit

• 10 pre-measured mixer packets in each can — each one contains the correct ratio of resin and catalyst

• General purpose, high strength, bonding and sealing

• Size: 41.4 ml (1.4 fl oz)• Quantity: 10


169-5464 185-4004 133 ml (4.5 fl oz)

RTV Silicone Adhesive Sealant

• Makes formed-in-place gaskets of any size and shape filling voids and irregularsurfaces for a positive seal

• Pressurized dispenser produces a consistent and even bead size• Can be applied faster with less waste than using standard squeeze tubes• Ready-to-use, no mixing and cures at room temperature• Excellent weather resistance and extreme flexibility — will not harden or crack• Adheres to metal, glass, natural and synthetic rubbers, wood, ceramic, other silicone

rubbers, painted surfaces, and many plastics• Resistant to most chemicals, solvents, and oils — blue only, not black• Works for electrical insulating applications — blue only, not black• Non-sag — can be applied to horizontal or vertical surfaces• Low odor, non corrosive sealant — blue only, not black• Will not harm oxygen sensors — blue only, not black

ID: C79388T1

Part No. Size Color

141-5830 205 g (7.25 oz) Black

141-5831 205 g (7.25 oz) Blue

03a.qxp 10/5/06 1:28 PM Page 5

Gasket Maker

• Medium strength for rigid flanges where extra shear strength is desired• Service temperature up to 175°C (350°F)• Large gap fill, up to .5 mm (.020 in)• Fast cure speeds• Uses:

- original equipment gasket for many applications- seals and locks tapered pipe plugs, nipples, and fittings- core plugs; some final drive flanges- replaces flywheel housing gasket in several applications

ID: C79588T1


6V-6640 185-3985 50 ml (1.69 fl oz)

4C-9501 Gasket Compound # 1

• N/A in EAME• Dries hard, machinable• Resists gasoline, diesel fuel, oils, antifreeze, alkali,

acids, steam• Withstands pressures to 34474 kPa (5000 PSI)• Withstands temperature to 204°C (400° F)• Size: 85 g (3 oz) tube• Quantity: 12

ID: C79510T1


• N/A in EAME• Non-hardening; thick, pasty• Resists gasoline, diesel fuel, oils, antifreeze, alkali,

acids, steam• Withstands pressures to 34474 kPa (5000 PSI)• Withstands temperature to 204°C (400°F)• Seals joints in segmented gaskets, and “T” joints• Size: 85 g (3 oz) tube• Quantity: 12

ID: C79573T1


• N/A in EAME• Thin, brushable, for sealing finely machined surfaces• Resists gasoline, diesel fuel, oils, antifreeze, alkali, acids, steam• Withstands pressures to 34474 kPa (5000 PSI)• Withstands temperature to 204°C (400°F)• Seal many types of gear type pumps; seals rubber hose to nipple connections• Size: 120 ml (4 fl oz) can• Quantity: 12



emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

ID: C79583T1

Flexible Gasket Makers

• Moderate strength for thin flexible flanges• Service temperature up to 177°C (350°F)• Large gap fill, up to .5 mm (.020 in)• Fast cure speed• Uses:

- original equipment gasket for many applications- seals and locks tapered pipe plugs, nipples and fittings- some final drive flanges


1U-8846 185-3983 50 ml (1.69 fl oz)

4C-5300 185-3984 300 ml (10.3 fl oz) ID: C79511T1

Liquid Gasket

• For use on 3176 Engine• Permanently flexible• Seals up to .08 mm (.003 in)• Temperature resistance is 149°C (300°F)• Will not cause corrosion on aluminum parts• Contains acetone (highly flammable); does not contain chlorine• 236 ml (8 fl oz) size comes in a brush top can


9U-5839 N/A 118 ml (4 fl oz)

138-8436 185-4590 236 ml (8 fl oz)

03a.qxp 10/5/06 1:28 PM Page 6

Room Temperature Vulcanizing (RTV) Silicone Adhesive/Sealants

• General purpose bonding and sealing applications• Resists cracking, shrinking, and migration• Excellent temperature range• Can be used for some low pressure gasketing applications• Minimum temperature: -73°C (-100°F)

ID: C79563T1

ID: C79544T1ID: C79512T1

Part No. Max. Temp. Max. Temp.Part No. (EAME only Qty. Color (intermittent) (continuous) Size

Standard cure for most applications:

8T-9022 185-3987 10 Blue 260°C (500°F) 204°C (400°F) 300 ml (10.15 fl oz)

8T-9014 205-8858 10 Clear 249°C (480°F) 204°C (400°F) 300 ml (10.15 fl oz)

4C-9613 N/A 1 Clear 249°C (480°F) 204°C (400°F) 82.8 ml (3 fl oz)

3S-6252 185-3986 1 Black 260°C (500°F) 204°C (400°F) 82.8 ml (3 fl oz)

High Temperature Adhesive Sealant

8T-9013 205-8857 10 Red 316°C (600°F) 260°C (500°F) 300 ml (10.15 fl oz)

4C-9614 N/A 1 Red 316°C (600°F) 260°C (500°F) 82.8 ml (3 fl oz)

Electronic application RTV (Non-corrosive cure)

8T-0065 186-1527 1 White 260°C (500°F) 204°C (400°F) 82.8 ml (3 fl oz)

Sensor Safe RTV

4C-9612 N/A 1 Ultra-Black 260°C (500°F) 204°C (400°F) 82.8 ml (3 fl oz)

Glass to glass bonding — Windshield seam RTV

119-0781 1 Clear 249°C (480°F) 204°C (400°F) 300 ml (10.15 fl oz)




4C-6715 Thermally Conductive RTV Kit

• Increases thermal conductivity between diode and aluminum heat sinkassembly on rotating field of power generator

• High thermal conductivity and electrical isolation• Conformable, cure in place thermal interface• Material has a 6 month shelf life when stored at 24° C (75° F)• Storage at or near freezing (0° C (32° F) prolongs product life• Also see heat sink compound

4C-6922 Superior E-Z Thrust Caulker

• Holds any 12 oz. tube designed for use with a caulking gun• Recommended for all grades of caulks, sealants and adhesives

from heavy to light consistencies• Size of cartridge: 1⁄10 Gal.

ID: C41206T1

ID: D01479T1

4C-6507 Heavy-Duty Air Powered Caulking Gun

• Easy twist-lock loading• Smooth uniform bead dispensing• No after-dripping• Pistol handle grip for comfort• All metal construction• Air pressure requirements are 5-100 PSI• 10 ft air line with standard 1⁄4 inch fittings supplied

03a.qxp 10/5/06 1:28 PM Page 7

ID: C41207T1

Window Bonding Adhesives and Tooling

To reseal windows with weather-strip:Part No. Description Size

9U-7239 Liquid Butyl Resealant one 10 ounce caulking gun cartridge

9U-6919 Butyl Sealant 3⁄8 inch x 1⁄8 inch x 50 foot roll

To bond windows to full cure within 2 hours:Caution: Window must be installed within 10 minutes

using this system.

Part No.Part No. (EAME only) Description Size

121-3911 187-4858 Window Primer 250 ml (8.5 oz) tube

175-2934 187-4864 Activator 250 ml (8.5 oz) tube

175-2935 187-4857 Fast Cure Window Adhesive 310 ml (10.5 oz) tubeand Booster

175-2936 Heating Oven

Pre-heat 175-2935 inside 175-2936 Oven for 1 hour prior to repairs. Clean the area to be repaired with 9U-6917 (189-8679 EAME only) (pour top quart) or 222-3117 (189-6296 EAME only) (aerosol).

If glass is supplied without ceramic coating, use 121-3911 (187-4858 EAMEonly) to prepare the area. Wait 10 minutes, then use 175-2934 (187-4864 EAMEonly) to activate the area. Wait 10 minutes, then apply the pre-heated 175-2935(187-4857 EAME only) to the area.

1-hour drive-away time, 2-hour full cure

See SEHS9824-01 Special Instruction (6/99) for detailed instructions.

To bond large windows:Part No.

Part No. (EAME only) Description Size

121-3911 187-4858 Window Primer 250 ml (8.5 oz) tube

121-3908 187-4856 Window Adhesive 310 ml (10.5 oz) tube

Clean the area to be repaired with 9U-6917 NACD only (189-8679 EAME only)(pour top quart) or 222-3117 (aerosol) (189-6296 EAME only). Use 121-3911(187-4858 EAME only) to prepare the area. Wait 10 minutes, then apply121-3908 (187-4856 EAME only) to the area.

See SEHS9824-01 Special Instruction (6/99) for detailed instructions.



emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

Seal glass to glass joints:Part No.

Part No. (EAME only) Description Size

119-0781 Clear Silicone Adhesive 300 ml (10.2 oz) cartridge

4C-6923 Super Ratchet-Type Caulker

• Designed for the professionals who prefer ratchet guns• Will outlast, outperform all other ratchet guns• Engineered to withstand heavy use• Equipped with ladder hook, built-in spout cutter, seal puncture tool, and convenient “D” ring

and wrist strap• Size of cartridge: 1⁄10 Gal.

Primer for polycarbonatePart No.

Part No. (EAME only) Description

166-1358 189-8653 Polycarbonate Primer

Primer for ABS plastic:Part No.

Part No. (EAME only) Desciption

166-1359 187-4862 ABS Primer

Window Tool Kit:127-6421 Window Tool Kit


121-9777 Cutout Wire

121-9780 Handles for cutout wire

121-9778 Cutout Knife

121-9779 Replacement Blades for 121-9778

121-9782 Suction Cup Holder

121-9781 Heavy Duty Caulking Gun

127-6883 Sponge Brushes

03a.qxp 10/5/06 1:28 PM Page 8


CleanersChem


Cleaners

222-3120 Windshield Cleaner

• Good for all types of glass• Safe for plastics, vinyl, tile, and all hard surfaces• Non-streaking• Dries completely• Does not leave a film• Size: 340 g (12 oz)

ID: D00665T1

Xtreme Windshield Washer Fluid

• Blue-tinted windshield cleaner and de-icer• Effective to -28.89° C (-20° F)

ID: D01663T1


271-1648 3.79 l (1 gal) jug 6

222-3122 Plastic and Rubber Protectant

• Contains no silicone• Formulated with UV inhibitors

to protect surface area• Cleans and protects• Size: 340 g (12 oz)

ID: D00677T1

169-0503 Seal Installation Kit

• N/A in EAME• Used to clean and lubricate

Duo Cone seals prior to installation (developed by Cat MVC)

• Cleaner dries quickly and leaves no film• For best results, use cleaner,

lubricant, and critical task wipers

ID: C79750T1

Service Parts


169-5418 Seal Lubricant (1 Gallon)

169-5420 Seal Cleaner (1 Gallon)

265-2256 Critical Task Wipers

Seal Installation Kit Consist

Seal cleaner 237 ml (8 oz.)

Seal lubricant 237 ml (8 oz.)

Critical 203 x 203 mm (8 x 8 in) task wipers 50 per package

102-9720 Air Filter Cleaning Kit

• Used to clean air filter elements• For use in AIRSEPS technology in marine engine applications• Specially formulated for removing dirt from cotton gauze air filters — prevents shrinkage or other damage

to filter element when used according to manufacturer’s directions• Air filter oil greatly increases effectiveness of filter — oil is added to filter after cleaning• System includes Formulated Cleaning Solution, Genuine Red Oil, and spray nozzle• Cleans four 228.6 x 228.6 mm (9 x 9 in) tapered filters or equivalent

ID: C66640T1

Service Parts


9U-7971 Air Filter Cleaner 0.95 l (1 qt)

102-9721 Filter Cleaner Oil 0.35 l (12 oz)

03a.qxp 10/5/06 1:28 PM Page 9

Cabinet Washers and Agitating Tanks

Cat Cabinet and Tank Liquid and Cat Cabinet and Tank Powder• Strong alkaline cleaners that remove dirt, oils, paint, and carbon deposits from ferrous metal parts• Clean better than previous Hydrosolv products due to increased levels of surfactants and wetting agents• Well suited for use in cabinet pressure washers and hot tanks• Non-foaming and aluminum safe

Hydrosolv 4110• Non-foaming aluminum safe cleaner• Strong alkaline cleaner that removes dirt, oils, paint,

and carbon deposits from aluminum and ferrous metal parts without discoloration

• Well suited for use in cabinet pressure washers and hot tanks

Part No.Part No. (EAME only) Name Qty. Size

174-6854 185-4592 Cat Cabinet & Tank Liquid 1 5 gallon

174-6855 185-4593 Cat Cabinet & Tank Liquid 1 55 gallon

174-6856 185-4595 Cat Cabinet & Tank Powder 1 5 gallon

174-6857 185-4596 Cat Cabinet & Tank Powder 1 55 gallon

4C-8648 N/A Hydrosolv 4110 1 1 gallon

4C-8649 185-4612 Hydrosolv 4110 1 5 gallon

4C-8650 185-4615 Hydrosolv 4110 1 55 gallon

Pressure Wash

Cat Pressure Wash• Heavy-duty, ready-to-use detergent and degreaser

for use in hand held pressure washers• Clean rinsing and can be used to wash engines,

trucks, machines, etc.

Hydrosolv 4165• Heavy-duty concentrated alkaline cleaner formulated

for use in high-pressure washers• Provides two weeks rust protection if you do not rinse

the part after cleaning

ID: C80311T1

Part No.Part No. (EAME only) Name Quantity Size

174-6858 185-4597 Cat Pressure Wash 1 5 gallon

174-6859 185-4598 Cat Pressure Wash 1 55 gallon

1U-5490 185-4619 Cat HD Pressure Wash 1 5 gallon


CleanersCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

ID: C80311T1

Defoamant and Descaleant/Conditioner

Hydrosolv defoamant DK100• Designed to knock down excess foam in hot tanks,

cabinet washers, anti-freeze stills, or any other aqueous foaming solution

Hydrosolv Descaleant and Conditioner• Can be used as a concentrate to remove scale from

pumps, lines and coils• Should be diluted 50% and used as a water conditioner for

high-pressure washers having automatic water conditoner dispensers

ID: C80222T1

Part No.Part No. (EAME only) Description Size Qty.

1U-8813 N/A Hydrosolv Defoamant DK100 1 gal 4

N/A 185-4623 Hydrosolv Defoamant DK100 1 gal 4

1U-9698 — Hydrosolv Descaleant and Conditioner 1 quart 12

03a.qxp 10/5/06 1:28 PM Page 10

Chemtool LAC 110 All-Purpose Cleaner Concentrate

• Concentrated all-purpose cleaner and degreaser• USDA-approved for effectiveness and safety• Bio-degradable, non-phosphorous for all washing applications including

homes, RV’s, office industry equipment, automobiles, and boats


269-8297 18.93 l (5 gal) bucket 1

Carpet/Upholstery Cleaner

• Easy cleaning of carpet and like fabrics


269-1928 0.56 l (19 oz) aerosol can 12


CleanersChem


General Purpose Detergents

Cat GP Wash• Economical ready-to-use general-purpose liquid cleaner for shop

maintenance, machine washing, floor washing, etc.• Provides good detergency for all types of light duty cleaning

Cat Citra Soap• Concentrated detergent with great foaming action• Can be used in scrubber machines, lotion soap dispensers,

or any heavy-duty hard surface cleaning where one would not use solvent based chemicals

ID: C80311T1

Part No.Part No. (EAME only) Name Qty. Size

174-6860 185-4600 Cat GP Wash 1 5 gallon

174-6861 185-4601 Cat GP Wash 1 55 gallon

174-6885 185-4604 Cat Citra Soap 1 1 gallon

03a.qxp 10/5/06 1:28 PM Page 11

Cat SCAApplication• For use with Cat DEAC low silicate heavy-duty diesel engine coolants,

including glycol-based antifreezes

Features• Helps stop rust and mineral deposits from forming in the cooling system

Benefits• Protects all metals• Protects against cylinder liner cavitation and corrosion• Will not affect gaskets or hoses

Coolants

Cat ELC™

ID: D01303T1


CoolantsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

ID: D01297T1

Cat DEAC™Application• For use in Cat diesel and gasoline engine cooling

systems, and most OEM diesel and gasoline engine cooling systems

Features• Contains conventional coolant technology• Fully formulated; does not require initial dose

of SCA’s at fill-up• Requires addition of SCA’s or coolant conditioners

every 250 hours

Benefits• Helps prevent corrosion and pitting

in the cylinder liner and block• Protects against freezing, pitting

and corrosion

Size(gal) (L) Part No.

Cat DEAC – Concentrate

1 8C-3684

55 8C-3686

Bulk 156-2649

Bulk 2P-9868


Embittered

1 238-8651

55 238-8653

4 9X-6586

5 215-4247 2

20 9X-6585

20 238-8291 1

20 219-3040 2

200 219-3041 2

205 237-7670 1

1 Australia2 Brazil


Cat ELC – 50/50 Premix

1 101-2844

5 129-2151

55 101-2845

275 (tote) 222-1534

Bulk 156-2653Embittered

1 238-8648

5 238-8649

55 238-8650

5 205-6611

5 214-4820 1

5 215-4245 2

20 237-4951 1

20 215-4246 2

25 205-6612


200 215-4242 2

205 237-4952 1

210 205-6613

1000 205-6614

1000 237-4953 1

Bulk 206-7831

Bulk 237-4950 1

Cat ELC – Concentrate

1 119-5150Embittered

1 238-8647

5 205-6615

5 214-4824 1

5 215-4244 2

Cat ELC Extender

0.250 (1 qt) 119-5152

1 210-0786

1 215-4241 2

5 219-3039 2

1 Australia2 Brazil

ID: D01309T1


Cat SCA

0.063 (1⁄2 pt) 6V-3542

0.125 (1 pt) 8T-1589

0.250 (1 qt) 3P-2044

5 8C-3680

55 5P-2907

1 217-0616

20 217-0617

208 217-0618

Applications• Preferred coolant for Cat machines and engines; used as factory-fill• For use in diesel and gasoline engines, including aluminum-based

cooling systems

Features• Contains no silicates, phosphates, nitrates or borates• Exceeds Cat EC-1 coolant performance requirement• Meets the performance requirements of ASTM D4985 and ASTM D6210

for heavy-duty low silicate antifreeze/coolants, and ASTM D3306 for automotive applications

• Does not form silica gel or hard water scale

Benefits• Improves water pump seal life• Requires less disposal volume• Does not require liquid or spin-on supplemental coolant additives (SCA’s)• Increases coolant service life from

6,000 to 12,000 service hours over conventional coolant

• Costs from 40 to 60 percent less than conventional coolant over the life of the product

03a.qxp 10/5/06 1:28 PM Page 12

Cat NGEC™

ID: D01315T1

Cooling System Cleaner – StandardApplications• Cooling system cleaner; full effect after several weeks in the cooling system• Not for use in removing large amounts of oil from cooling systems

Feature• Removes scale or lime deposits

Benefit• Cleans cooling system while

the machine works

ID: D01321T1


CoolantsChem



Cooling System Cleaner – Standard

0.50 (2 qt) 6V-4511

1.89 185-5121

Cooling System Cleaner – Quick FlushApplications• For use as preventative maintenance or as a short-time flush at the

time of coolant change• Not for use in removing large amounts of oil from cooling systems

Feature• Removes limes, scale and solder bloom

Benefit• Allows for one-step cleaning in

just 90 minutes

ID: D01327T1


Cooling System Cleaner – Quick Flush

0.125 (1 pt) 4C-4609

0.250 (1 qt) 4C-4610

1 4C-4611

5 4C-4612

55 4C-4613

3.79 185-4630

Size(gal) Part No.

Cat NGEC

1 233-9797

5 233-9798

55 233-9799

275 239-3649

Application• Heavy-duty cooling system fluid designed to provide superior protection against

pitting, freezing and corrosion in Caterpillar natural gas engines, and most OEMdiesel, gasoline and natural gas engines

Features• Meets ASTM D6210 standard for heavy-duty antifreeze/coolants and

ASTM D3306 for automotive applications; also meets glassware corrosion test ASTM D1384

• Ready to use as initial fill or for top off; premixed 50 percent with deionized water

• Requires no initial addition of SCA’s• Silicate additives in Cat NGEC for corrosion control also seal minor leaks by

combining with oxygen in the atmosphere and creating a solid – silicon dioxide

Benefits• Quick, easy servicing; no need to add water to 50/50 premix• Uncompromised performance and life; eliminates risks of improperly

mixing coolant concentrate and water

Coolant Conditioner Test KitApplication• Simple dip test takes just minutes

to perform

Feature• Does not require dilution, titration

or drops to count

Benefit• Includes a color density change

for people with color blindness

ID: D01333T1

NACDItem Part No.

Coolant Conditioner Test Kit 4C-9301(100 Test Strips, Sample, Bottle, Pipette)

Refill Test Strips (1 Bottle of 50) 4C-9297

ELC™ Dilution Test Kit• Tests reserve alkalinity and contamination• Used to test inhibitor level of Cat ELC• Simple pass/fail system

is indicated by color• Disposable — kit contains

premeasured chemicals in sample tubes

• Kit contains materials for 10 tests

ID: D01339T1

Item Part No.

ELC™ Dilution Test Kit 223-9116

03a.qxp 10/5/06 1:28 PM Page 13

Lubricants

Cat DEO™Applications• Preferred engine oil for Cat machines and engines;

used as factory-fill• For use in Cat diesel, gasoline and natural gas engines

Features• Reduces piston ring groove deposits to minimize ring sticking• Controls soot build-up, which can lead to filter plugging• Exceeds API (American Petroleum Institute) test standards

Benefits• Ensures optimum performance in Cat engines due to premium

quality and conformance to four Cat proprietary engine tests• Improves fuel and oil consumption

ID: D01345T1


Cat DEOSAE Oil Viscosity: 10W-30

API/OEM Specification: API CI-4, ECF-1

5 3E-9709

55 3E-9708

Bulk 155-6198

18 283-1709

20 3E-9844

200 130-7055

208 3E-9707

1000 148-3539

Bulk 5P-2586Cat DEO

SAE Oil Viscosity: 15W-40API/OEM Specification: API CI-4, ECF-1

0.250 (1 qt) 3E-9715

(4x) 1 248-7518

5 3E-9713

55 3E-9712

Bulk 155-6199

Bulk (rail car) 283-3425

1 123-4077

4 3E-9902

5 3E-9901

18 3E-9900

19 3E-9849

20 3E-9848

60 121-4038

200 3E-9842

205 3E-9841

208 3E-9840

1000 3E-9838

1040 201-0775

2000 120-5285

10,000 119-5131

15,000 119-5130

Bulk 8T-9548


Cat DEOSAE Oil Viscosity: 30

0.250 (1 qt) 8C-3702

(4x) 1 248-7520

5 8C-3700

55 8C-3699

Bulk 155-6201

5 9X-6178

20 7X-7840

200 7X-2887

205 7X-7839

208 9X-6462

1000 9X-6271

Bulk 8C-3698Cat DEO

SAE Oil Viscosity: 40

0.250 (1 qt) 8C-3707

1 8C-3706

5 8C-3705

55 8C-3704

Bulk 155-6202

18 9X-2004

19 9X-8529

20 7X-7843

200 9X-8528

205 7X-7842

208 9X-6463

1000 9X-6272

1200 203-1044

2000 119-5134

10,000 119-5133

15,000 119-5132

Bulk 8C-3703


LubricantsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03a.qxp 10/5/06 1:28 PM Page 14

Cat DEO-ULS™

Applications• Used in heavy duty engines equipped

with Diesel Particulate Filters (DPF)• Required for all on-highway engines equipped with after-treatment

systems using 15 ppm sulfur fuel (may also be used with enginesusing less than or equal to 500 ppm (0.05% wt.) sulfur fuel whichare not fitted with after-treatment systems

Features• Engine oil compatible with ultra low sulfer (ULS) diesel fuel

applications• Limited ash, sulfated ash, and phosphorous content—reduces

DPF plugging, extends DPF life, and reduces catalyst deactivation• Better detergents and dispersants—enhances protection against

piston and ring groove deposits, improves soot dispersing and soot-related viscosity control

• Advanced additive package—Specially designed to improve theprotection of both the engine and Diesel Particulate Filter (DPF)

Benefits• Improves wear protection• Reduces oil consumption• Enhances used oil low-temperature pumpability• Higher protection against thermal and oxicative breakdown

ReferenceIRM, August 2006, “Introducing Cat® DEO-ULS™”

Please refer to the following table for more detailed applicationinformation.

On-Highway Engine Aftertreatment System Fuel Sulfur RecommendedContent Engine Oil

Model Year 2007 Yes – Diesel Particulate less than or equal to 15 ppm Cat DEO-ULS1

and Later Filter (DPF) (Required)

Yes – Diesel Particulate less than or equal to 15 ppmFilter (DPF) (Recommended)DPF cleaning frequency may be increased when using DEO vs DEO-ULS.

Model Year Prior Yes – Diesel Oxidation less than or equal to 15 ppm Cat DEO orto 2007 Catalyst (DOC) less than or equal to 500 ppm Cat DEO-ULS

None less than or equal to 15 ppmless than or equal to 500 ppm

1 Minimum requirement API CJ-4 oil

Note that Cat DEO-ULS can be used in off-highway applications. In these applications and whenused with high sulfur fuels that may contain up to 5000 parts per million (ppm) sulfur, oil drainintervals may need to be revised.


Cat DEO-ULSSAE Oil Viscosity: 15W-40:

API/OEM Specification: API CJ-4, ECF-3

1 3.785 291-3866

5 19 291-3868

55 208 291-3869

ID: D01351T1


Cat DEO SYNSAE Oil Viscosity: 5W-40

API/OEM Specification: API CF

(4x) 1 248-7519

55 141-3341

Bulk 155-6200

5 224-8665

20 224-8666

208 224-8667

Bulk 142-1417

Cat Arctic DEO SYN™Applications• Synthetic engine oil for Cat and other OEM earthmoving, commercial,

marine and on-highway truck diesel engines• Preferred engine oil for arctic climates and operation

at temperature extremes

Features• Blend of two Group IV synthetic base stocks for easy starting and less

wear at low temperatures• High temperature lubricity and superior oxidation for reduced wear

in high temperature operation• Higher solubility capability to keep soot and contaminants in suspension

Benefits• Maximum productivity, long life and low operating costs• Extended drain capability when used with S·O·SSM Services and Cat Filters

Size(L) Part No.

Cat Arctic DEO SYN1

SAE Oil Viscosity: 0W-30

20 228-6071

205 228-6073

Bulk 5P-52891 This oil is not available for use in all global regions.


LubricantsChem


Cat DEO SYN™Application• Synthetic diesel engine oil

Features• Highly resistant to oxidation• Provides exceptional cold start

operation in temperatures as low as -30° C (-22° F)

Benefits• Provides extended drain capability• Provides capability to improve fuel

economy by 2-5 percent over conventional 15W-40 oils

ID: D01717T1

03a.qxp 10/5/06 1:28 PM Page 15

Cat NGEO™

Application• Natural gas engine oil for use in all Cat natural gas engines and any

four-cycle, medium-to-high speed gas engine requiring a low ashlevel product

Features• Provides excellent foam and corrosion resistance• Improves piston cleanliness and controls carbon deposits

Benefits• Provides maximum protection against piston scuffing, scoring

and piston/cylinder liner wear• Provides excellent valve guide face and seat protection• Drain recommendations

G3400 - 750 hrsG3500 - 1000 hrsG3600 - 5000 hrs

ID: D01357T1

Size(L) Part No.

Cat NGEOSAE Oil Viscosity: 30

19 121-0326

205 9X-8526Cat NGEO


19 121-0327

200 197-6911

205 9X-8527

208 105-3336

209 166-3491

1000 159-8156

Cat NGEO EL250™Application• For natural gas engines and other engines requiring low ash oil

Features• Increased detergent concentration and acid neutralizing capability to assure less lacquer

and deposits on pistons and valves• Control of sludge formulation• Outstanding resistance to oil nitration and oxidation

Benefits• Improves ring and liner service life• Increased soot-handling capability• Protection against valve guide face and seat damage, piston scuffing, scoring and piston/cylinder wear,

foam and corrosion damage, and piston carbon deposits• Drain recommendations

G3400 - 1000 hrsG3500 - 1250 hrsG3600 - 6000 hrs

Size(L) Part No.

Cat NGEO EL250SAE Oil Viscosity: 30

20 216-9220

208 216-9223

Bulk 7X-2425Cat NGEO EL250


20 216-9221

208 216-9224

Bulk 7X-2426

Cat NGEO EL350™Application• For natural gas engines and other engines requiring low ash oil

Features• Superior thermal stability• Superior resistance to oxidation and nitration• Excellent viscosity control

Benefits• Capability for longer drain intervals• Reduces carbon and sludge formation• Maximum protection against foaming and corrosion resistance, piston scuffing, scoring and piston/cylinder

wear, foam and corrosion damage, and piston carbon deposits• Drain recommendations

G3400 - 2000 hrsG3500 - 2000 hrsG3600 - 8000 hrs


Cat NGEO EL350SAE Oil Viscosity: 40

5 225-5082

55 225-5083

Bulk 272-3217

19 275-5709

20 225-5084

205 269-1971

208 225-5085

1000 249-2309


LubricantsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03a.qxp 10/5/06 1:28 PM Page 16

Cat TDTO™

ID: D01363T1


Cat TDTOSAE Oil Viscosity: 10W

API/OEM Specification: Cat TO-4

5 8T-9568

55 8T-9569

Bulk 155-6212

5 100-7019

19 145-0995

20 7X-7852

25 9X-8525

200 112-2866

205 7X-7851

208 103-2528

209 123-3104

1000 166-0393

Bulk 3P-0659Cat TDTO

SAE Oil Viscosity: 30API/OEM Specification: Cat TO-4

(4x) 1 248-7521

5 8T-9572

55 8T-9573

Bulk 155-6213


5 9X-6467

18 9X-2010

19 9X-8469

20 7X-7855

60 121-4042

200 7X-2888

205 7X-7854


Cat TDTO (cont’d)SAE Oil Viscosity: 30

API/OEM Specification: Cat TO-4

208 9X-6466

1000 7X-7611

1040 201-0777

2000 119-5137

10,000 119-5136

15,000 119-5135

Bulk 2P-9869Cat TDTO

SAE Oil Viscosity: 50API/OEM Specification: Cat TO-4

5 8T-9576

55 8T-9577

Bulk 155-6214


5 9X-8443

18 9X-2012

19 9X-8531

20 7X-7858

60 121-4043

200 9X-8530

205 7X-7857

208 3E-9478

1000 7X-7612

2000 119-5140

10,000 119-5139

15,000 119-5138

Bulk 5P-1228Cat Arctic TDTO1

SAE Oil Viscosity: 0W-20API/OEM Specification: Cat TO-4

20 228-6069

205 228-60701 Cat Arctic TDTO is not available in all global

regions.

Cat TDTO-TMS™Application• Transmission and drive train oil for use in all seasons

Features• Exceeds the Cat TO-4 industry specification and meets Allison C-4

transmission peformance• Protects against scoring and pitting of gear teeth and bearings• Improved cold water performance

Benefits• Improves transmission performance in cold weather• Provides extended drain capability• Compatible for use in multiple compartments


LubricantsChem


Applications• Preferred transmission and drive train oil for Cat equipment;

used as factory-fill• For use with all Cat transmission and brake disc materials

Features• Exceeds the Cat TO-4 industry specification and meets

Allison C-4 transmission performance requirements• Protects against scoring and pitting of gear teeth

and bearings

Benefits• Increases load carrying capacity of clutches and eliminates

brake chatter• Provides maximum friction material life in power-shift

transmissions and wet brakes

ID: D01369T1


Cat TDTO - TMSSAE Oil Viscosity: Multi-ViscosityAPI/OEM Specification: Cat TO-4M

5 154-0195

55 154-0194

Bulk 154-0192

20 154-0196

208 154-0197

Bulk 154-0193

03a.qxp 10/5/06 1:28 PM Page 17

Cat MTO

Application• For use in specified Cat components and systems, such as Backhoe Loader

Rear Axles, and Compactors CP563 and CS563 Rear Axles

Features• Meets Ford spec M2C134 D/C• Enhanced shear stability in field service and extreme-pressure

wear protection• Optimized low-temperature performance

Benefits• Provides considerable improvement in wet brake control• Optimized wear protection of gears, pumps and hydraulic valves

ID: D01375T1


Cat MTOSAE Oil Viscosity: 10W-30

API/OEM Specification: Ford M2C134D/C, JohnDeere J20A/C, Case MS1205, MS1207

5 105-3335

55 105-3334

Bulk 155-6218

5 172-6894

18 135-3189

19 112-9183

20 109-4395

200 126-2700

205 138-4271

208 120-5286

Bulk 105-3333

Cat FDAO™

ID: D01381T1


Cat FDAOSAE Oil Viscosity: 60

API/OEM Specification: Cat FD-1

5 184-6022

55 184-6021

Bulk 184-6020

18 206-5210

20 184-8055

200 198-7672

205 201-9855

208 184-8056

1000 221-3445

1200 202-9753

Bulk 184-8054

Cat FDAO SYN™

Applications• Preferred synthetic final drive and axle oil for Cat machines• For off-highway trucks and track-type tractors subjected to severe

operating conditions in which mineral oil-based final drive lubricantsexperience high rates of oxidation and shorter life

• Not for use in compartments in which GL-5 gear oils are required; not for use in compartments that contain brake or friction materials

Features• Reduces contact fatigue• Protects against rust and copper corrosion• Minimizes foaming

Benefits• Provides extended life capability when S·O·S Services is used

at 500 hour intervals• Extended gear and bearing life

ID: D01387T1


LubricantsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

Applications• Preferred final drive and axle oil for Cat machines; used as factory-fill

for all Cat off-highway trucks and D6R-D11R tractor final drives• Not to be used in compartments which contain brake or friction materials

(unless specified in the Operational & Maintenance Manual; not to be used in compartments in which GL-5 gear oils are required)

Features• Specially formulated for the final drives and differentials of Cat

off-highway trucks, D6-D11 tractors and selected machine models• Designed for protection of highly loaded gears and bearings

Benefit• Provides greater protection against pitting and scoring of gear teeth

and bearings than transmission and drive train oil


Cat FDAO SYNSAE Oil Viscosity: Multi-ViscosityAPI/OEM Specification: Cat FD-1

5 208-2390

55 198-7450

18 206-5211

208 206-5212

03a.qxp 10/5/06 1:28 PM Page 18

Cat HYDO™

Applications• Preferred hydraulic oil for Cat machines; used as factory-fill oil• For use in all hydraulic systems and hydrostatic transmissions

Features• Additive system contains superior metallic detergents,

rust inhibitors, antiwear agents and defoamants• Exceeds minimum zinc additive requirement needed

for lubrication of pumps, motors and valves

Benefits• Disperses water in the hydraulic oils, preventing water

damage to pumps, motors and valves• Provides maximum protection against mechanical wear,

low temperature rusting and corrosive wear• 4000 hour drain recommendation in most models

and applications when combined with S·O·S Services

ID: D01393T1


Cat HYDOSAE Oil Viscosity: 10W

(4x) 1 248-7522

5 8T-9580

55 8T-9581

Bulk 155-6216

5 9X-6171

18 9X-2014

19 9X-8533

20 7X-7861

60 121-4044

200 9X-8532

205 7X-7860

208 9X-6468

1000 7X-7613

1040 201-0776

2000 119-5143

10,000 119-5142

15,000 119-5141

Bulk 2P-9063

Cat GO

Applications• For use in the vibrator drum of soil compactors• For use in manual transmissions, axles, final drives and systems requiring API GL-5 oil

Features• Protects against rust and corrosion• Protects against scoring and pitting of gear teeth and rolling element bearings• Includes EP “Extreme Pressure” additive

Benefit• Provides excellent stability under high temperatures and superior performance under low temperature

ID: D01399T1


Cat GOSAE Oil Viscosity: 80W-90

API/OEM Specification: GL-5

5 8T-9582

15 8C-7398

30 8T-9583

55 8T-9584

Bulk 155-6220

5 9X-6470

20 7X-7867

60 7X-7887

208 9X-6469

1000 119-5129

1200 8C-9927

2000 119-5144

Bulk 2P-9863


Cat GOSAE Oil Viscosity: 85W-140

API/OEM Specification: GL-5

5 9X-6185

4 7X-7618

18 133-9643

19 9X-8535

20 7X-7617

50 3E-8326

200 205-4312

205 7X-7616

209 133-9644

1000 7X-7615

Bulk 7X-7614


LubricantsChem



Cat HYDOSAE Oil Viscosity: 30

18 100-7017

20 127-5454

200 122-6627

208 127-5453

Bulk 231-3801

03a.qxp 10/5/06 1:29 PM Page 19

Cat Synthetic GOApplications• Synthetic gear oil for specified Cat direct drive transmissions, differentials,

final drives, and sealed and lubricated track joints• Recommended for all systems permitting the use of GL-5 multi-purpose

type gear oil

Features• Good foam resistance• Compatibility with non-silicone seals and gaskets• Excellent chemical and thermal stability

Benefits• Uninterrupted performance under broad temperature variations• Excellent protection against wearing and scoring caused by high speed

and heavy gear loads• Superior protection against rusting, staining and corrosion

ID: D01405T1


Cat Synthetic GOSAE Oil Viscosity: 75W-140

5 242-3466

55 242-3467

Bulk 8C-3400Cat Arctic GO

SAE Oil Viscosity: 75W-90

5 8C-3688

55 8C-3747

Bulk 155-6222

Bulk 5P-7040

Cat Backhoe Loader Axle and Brake Oil Additive

Application• For the rear axle housing of Cat backhoe loaders; do not use in any other axle, brake or hydraulic system

Benefit• Reduces noise and chatter experienced by some Cat backhoe loaders

ID: D01411T1

SizeItem (gal) (L) Part No.

Cat Backhoe Loader 0.250 (1 qt) 197-0017Axle and Brake Oil Additive Bulk 185-0783

Cat Hydraulic Oil Additive 0.250 (1 qt) 1U-9891Bulk 9X-2037


LubricantsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03a.qxp 10/5/06 1:29 PM Page 20

Greases

Ultra 5Moly GreaseApplications• Large mining shovels, excavators, drag lines, loaders, track-type tractors,

mining trucks, conveyor belts and any other equipment that operates in moderate to extremely cold temperatures

• Recommended for all high load, high impact and wet applications where the ambient temperatures are between -35° C (-31° F) and 40° C (104° F) for Ultra 5Moly #1 and between -30° C (-22° F) and 50°C (122° F) for Ultra 5Moly #2

Features• Provides excellent pumpability and dispersing properties in ambient

temperatures• Environmentally friendly, with no additives such as lead, antimony, zinc,

barium chlorine, and no sulfur or phosphorous• Exceptional mechanical stability, and very high resistance to water washout,

oxidation and corrosion

Benefits• Less Auto-Lube grease is required to refill the joint because it stays

in the joint longer• Lower wear rates due to lower frictional heat for maximum component life

and minimum downtime

ID: D01435T1

Ultra 5Moly Grease NLGI Grade 1

Size(lb) (kg) Part No.

14 oz (cartridge) 397 g (cartridge) 161-9203

15.9 oz (cartridge)1 450 g (cartridge)1 197-9227

35 (metal pail) 16 (metal pail) 266-8562

35 (plastic pail) 16 (plastic pail) 183-3432

120 (keg) 54 (keg) 161-0970

400 (drum) 181 (drum) 161-0971

3500 (tote) 1588 (tote) 266-8564Ultra 5Moly Grease NLGI Grade 2





120 (keg) 54 (keg) 183-3427

400 (drum) 181 (drum) 183-3428

3500 (tote) 1588 (tote) 183-34291 Australia

Advanced 3Moly Grease

Applications• For use in a wide range of operating temperatures: -21° C to 149° C

(-5° F to 300° F)• For use with heavily loaded bearings and joints requiring an extreme

pressure grease

Feature• Contains 3 percent molybdenum disulfide

Benefit• Excellent load-carrying capacity for applications without temperature

or moisture extremes

ID: D01417T1

Advanced 3Moly NLGI Grade 2 (3% Moly)


14 oz (cartridge) 397 g (cartridge) 5P-0960



35 (plastic pail) 16 (plastic pail) 7X-7699

120 (keg) 54 (keg) 9X-6489

400 (drum) 181 (drum) 7X-7701


Multipurpose GreaseApplication• For use in grease fittings and lubrication points in low load, low speed applications

Feature• Contains no molybdenum disulfide

Benefit• Exceptional general purpose and automotive grease

ID: D01423T1


GreasesChem


Multipurpose Grease NLGI Grade 2


14 oz (cartridge) 397 g (cartridge) 1P-0808



35 (plastic pail) 16 (plastic pail) 7X-7664

120 (keg) 54 (keg) 9X-6488

400 (drum) 181 (drum) 7X-7665


03b.qxp 10/5/06 1:29 PM Page 21

White Assembly Grease

Application• For use in general assembly and other light-duty applications

Features• Added tackifiers, making it ideal for holding gears, bearings, gaskets

and other parts during assembly• Contains no molybdenum disulfide

Benefit• Exceptional general purpose grease

White Assembly Grease NLGI Grade 2


13 oz (aerosol) 129-1968



Desert Gold GreaseApplications• For use in central lube systems on large mining vehicles• For use in heavily loaded joints where temperatures can be as high

as 232° C (450° F)

Features• Extra tacky to stick to open gears and bearings• Contains 5 percent molybdenum disulfide for extra high loads

Benefits• Very water resistant• Longer lasting than regular molybdenum disulfide containing greases

ID: D01429T1

Desert Gold Grease NLGI Grade 2






120 (keg) 54 (keg) 129-1943

400 (drum) 181 (drum) 129-1944


Arctic Platinum GreaseApplications• For use in central lube systems on large mining vehicles• For use in heavily loaded joints where temperatures can be as low as -57° C (-70° F)

Features• Provides an extra tacky hold to stick to open gears and bearings• Contains 5 percent molybdenum disulfide for extra high loads

Benefits• Exceptional water resistance• Exceptional resistance to breakdown from mechanical working

ID: D01519T1

Arctic Platinum Grease NLGI Grade 0



120 (keg) 54 (keg) 129-8709

400 (drum) 181 (drum) 129-8710


GreasesCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03b.qxp 10/5/06 1:29 PM Page 22

Leak Detection

Oil Dyes

• Highly concentrated oil soluble dyes for adding color to lubricating oils, transmission oils, hydraulic oils and fuels• Visible at concentrations of 1 part in 10,000 or more. It only takes 30 ml (1 oz) to color 473 l (125 gal)

of light color oil• Use it to color code oils to prevent mixups• Use it to identify the source of leaks when more than one source is possible• Hint: For sumps with dark colored oil, use oil dyes which are visible in black light (ultraviolet) such

as 1U-5572 through 1U-5575

ID: C79584T1

Part No.Part No. (EAME only) Color Size Qty.

9U-5031 185-4779 Red 240 ml (8 fl oz) 1

9U-5032 185-4781 Blue 240 ml (8 fl oz) 1

Toolmaker’s Ink/Layout Blue

• Use to check fit on fuel injectors/sleeves• Check fits between engine valves and valve seats• Allow to dry and use for sheet metal layout• Deep blue color makes scribed lines stand out

Part No. Qty. Description Size

9U-6075 12 Toolmaker’s Ink/Layout Blue 339 g (12 oz) Aerosol

9U-6076 12 Toolmaker’s Ink/Layout Blue 222 ml (7.5 fl oz) Brush Top Can

Aerosol Liquid Penetrant and Developer

• Checks for surface cracks in ferrous and non-ferrous parts with regular light

• Contains no chlorene or sulphur bearing solvent• Conforms to MIL-1-25135, RDT F-3-6T standard and other

military specifications• Simple and easy to use

Cross Reference Chart for Liquid Penetrant Kit

Cat/Crown Magnaflux Turco Min.Fault Spot By Sherwin Met-L- Ship.

Description Finder Check Check Dubl-Check Check Qty.

Penetrant,Aerosol 4C-4804 SKL-S By Check DP-40 VP-31 12 each

Developer,Aerosol 4C-4805 SKD-NF By Check D-100 D-70 12 each

4C-5623 Smoke Candles

• Quick and easy way to check for cab leaks• Inexpensive• Generates 4000 cu. ft. of dense white smoke• Easy to use — light one smoke candle and set on floor of cab, close windows and doors with fan on HI.

Watch for areas where white smoke is escaping.• 1 dozen per box

ID: C27233T1


Leak DetectionChem


03b.qxp 10/5/06 1:29 PM Page 23

UV Visible Dyes for Leak Detection

• Detects leaks in light or dark oils, fuels, water solutions

RecommendedPart No. Description Size Dosage

To detect oil leaks in engines, transmission, hydraulic systems, etc.

1U-5572 Oil Glo 22 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 7.58 l (2 gal) of oil

1U-5573 Oil Glo 22 Additive 0.47 l (1 pt) bottle 28.4 g (1 oz) per 7.58 l (2 gal) of oil

To detect fuel leaks or suspected fuel dilution

1U-5574 Gas Glo 32 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 37.9 l (10 gal) of gasoline or diesel fuel

1U-5575 Gas Glo 32 Additive 0.47 l (1 pt) bottle 28.4 g (1 oz) per 37.9 l (10 gal) of gasoline or diesel fuel

To detect cooling system leaks, use:

1U-5576 Water Glo 23 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 151.6 l (40 gal) of water

1U-5577 Water Glo 23 Additive 0.47 l (1 pt) bottle 28.4 g (1 oz) per 151.6 l (40 gal) of water

Service Parts


1U-5567 Black Light Filter

1U-5568 110V, 150 Watt Spot Bulb

Optional Items

1U-5571 Spectacles, Ultraviolet Light Absorbing

1U-5570 Storage Case (Heat Resistant)

1U-5569 Ultraviolet Light Cover

280-8147 120V/100 Watt Ultraviolet Spot Bulb, Medium Base, Average Intensity 7000 milliwatts

280-8144 120V/100 Watt Ultraviolet Spot Bulb, Ad Medium Base, Average Intensity 7000 milliwatts


Leak DetectionCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

Leak Detection —1U-5566 Black Light, 110 Volts1U-6444 Black Light, 220 Volts

• Handheld• An anodized aluminum lamp housing• Makes it easier and quicker to detect leaks in oil, fuel and cooling systems• Additives, available separately, can be put in the suspect system

and the leak point will show in the black light (ultraviolet light)• Instructions come with the kit• Also works with fluorescent penetrant kit• Optional light cover, made of heat-resistant neoprene rubber, helps protect

the user from possible burn injury, and also provides protection against mechanical shock damage

ID: C41383T1

03b.qxp 10/5/06 1:29 PM Page 24

Solvents and Lubricants

Brake Cleaner Low VOC

• Cleans parts of dust, dirt, grease, oil, and brake fluid residue

• Non-chlorinated formula• Fast acting cleaner for all metal parts• Dries quickly• Low level of volatile organic chemicals• Approved for sale in California

ID: D00659T1

Part No. Part No.(NACD only) (LACD/APD/EAME only) Size

222-3117 222-3118 340 g (12 oz)

Electrical Component Cleaner

• Leaves no residue• Cleans and dries quickly—no need for rinsing• Will not cause corrosion• Non-flammable material

ID: D00689T1

Part No. Part No.(NACD only) (LACD/APD/EAME only) Size

222-3124 222-3119 340 g (12 oz)

Mineral Spirits

• For use in solvent stands, immersion tanks, and manual cleaning equipment• Can be used with brush, rags, or spray• Has minimum flash point of 96°C (205°F) COC• High quality product with excellent solvency and is capable of being recycled

indefinitely through a solvent reclaiming still• If used in spray equipment, follow recommendations of spray equipment

manufacturer• Always follow precautions from Material Safety Data Sheet

Part No.Part No. (EAME only) Size Quantity

4C-6796 185-4756 18.93 l (5 Gal) 1

4C-6797 185-4757 208 l (55 Gal) 1

222-3121 Rust Preventative

• Provides a hard film surface with good corrosion and rust resistance

• Protects equipment stored outside• Helps protect equipment used around salty environments• Provides protection in humid environments• Size: 340 g (12 oz)

Note: Read and follow all manufacturer’s directions and safety precautions when using this product.

ID: D00671T1

222-3123 Light Penetrating and Lubricating Oil

• Use on anything that squeaks, sticks, or binds, like door hinges and hand tools

• Lubricates tight fitting or stubborn bolts, nuts, keys, and pins

• Displaces water• Can be used to dry wet electrical system• Loosens nuts, bolts, fittings, battery cables, and hinges• Rust and corrosion inhibitor• Size: 340 g (12 oz)


Solvents and LubricantsChem


ID: D00683T1

CT2 Air Tool Oil/Lubricant

• Lubricates and protects piston-type or rotary pneumatic air tools• Prevents rust/corrosion


269-1944 0.95 l (1 qt) bottle 12

03b.qxp 10/5/06 1:29 PM Page 25

Reusable, Bulk-Liquid SprayersWarranty: Manufacturer’s

• Used to apply oil and water-based bulk chemicals, such as cleaners, degreasers, penetrating oils, solvents, or lubricants

• Compressed air sprayers provide a cost effective, reusable alternative to traditional spray cans (eliminates both storage and disposal concerns)

• Caterpillar compressed air sprayeres use a special chemical-resistant internal seal which virtually eliminates seal replacement problems found in standard sprayers

• Eliminate using flammable and/or environmentally dangerous propellants• Canisters pressurized with compressed air from any standard air compressor• Both sprayers constructed with metal canisters (steel or brass), brass nozzles, and corrosion resistant internal parts• Steel canister sprayers are used for oil and solvent-based materials while brass canisters can also be used

for water-based materials• Cannot be used for paint application• Capacity: 0.9 l (32 oz)

222-3115 Heavy Duty Penetrating Oil

• Quickly loosens stubborn parts—frozen nuts, bolts, pipe fittings, heat valves, rolling pins, press fit parts, and key ways

• Heavy-duty• Enhanced penetration action• Size: 340 g (12 oz)

ID: D00647T1

242-6990 Dry Film Lubricant

• Dry, low-friction lubricant• Does not attract dust or dirt• For use with sliding surfaces, such as motor grader

blades circles and backhoe loader extended stick and side shift mechanisms

• Size: 340 g (12 oz)

ID: D00653T1

ID: D00623T1

222-3112 Battery Saver

• Creates a protective coating, giving maximum battery protection

• Recommended for use on all battery installations• Keeps dirt and other contaminants from interfering

with the flow of power• Prolongs battery, cable, and clamp life• Size: 340 g (12 oz)

ID: D00629T1

Chain and Cable Lubricant

• Good corrosion and rust resistance• Reduces and protects chain against wear—increases life

of chain and cable• Foaming action that helps cover all surfaces• Fast penetrating action• Resists high temperature breakdown

ID: D00617T1


222-3110 340 g (12 fl oz) 12

4C-4081 (not shown) 18.9 l (5 gal) 1


Solvents and LubricantsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

222-3111 Battery Cleaner

• Dissolves and neutralizes battery acid and harmful corrosion from all battery parts, terminals, cables, hold-downs, and boxes

• Recommended for all construction and industrial equipment batteries

• Can be used on automobile, marine, and industrial batteries• Size: 340 g (12 oz)

ID: D00593T1


231-7015 Steel Canister Sprayer

231-7020 Brass Canister Sprayer

Service Parts

231-7016 Adjustable Tube

231-7017 Seal

231-7018 Nozzle

03b.qxp 10/5/06 1:29 PM Page 26

ID: D01317T1

264-4356 Plastic Spray Bottle

• For general application cleaning solutions• Trigger-type atomizer cap with adjustable spray• Capacity: 473 ml (16 fl oz)• One or two ounce gradations• Color: opaque

Thread Lubricant

• Moderate temperature• High torque• Prevents galling; eases disassembly• Completely transparent to S·O·S analysis• Use inside engines, transmissions, etc. where

S·O·S will be used and all highly torqued undercarriage components

• Extremely economical to use• Comes in brush-top can

ID: C79591T1Part No.

Part No. (EAME only) Size Quantity

4C-5591 N/A 113 g (4 oz) 12

4C-5592 N/A 227 g (8 oz) 12

4C-5593 185-3989 1.13 kg (40 oz) 12

High Temperature Anti-Seize

• Allows easy loosening of joined parts in high temperature environments

• Matches Caterpillar production specifications

• Heavy-duty

ID: D00611T1Part No.

Part No. (EAME only) Description Size Quantity

4C-5598 N/A Brush-top can 113 g (4 oz) 12

4C-5599 N/A Brush-top can 227 g (8 oz) 12

5P-3931 185-3990 Brush-top can 1.13 kg (40 oz) 12

222-3114 Aerosol 340 g (12 oz)

Heat Sink Compound

• High thermal conductivity• Does not break down• No migration• Protects high current carrying semi-conductors, power transistors,

diodes, and SCR’s• Also see 4C-6715 Thermally Conductive RTV

Part No.Part No. (EAME only) Size Quantity

5P-8937 186-1529 142 g (5 oz) 1

5P-9210 N/A 397 g (14 oz) 1

Molybdenum Paste

• Prevents bushing to thrust ring galling on elevated track model tractors

• On head bolts on some model engines




ID: C33335T1


6V-4876 186-1531 500 g (17.6 oz) 1

Camshaft and Follower Lubricant

• Prevents galling on camshafts with slipper type followers

• Apply during engine buildup to provide necessary lubrication at startup

ID: C79552T1


8T-2998 185-4758 236 ml (8 fl oz) 12

03b.qxp 10/5/06 1:29 PM Page 27

Silicone Turbo Grease

• Silicone grease for turbocharger rebuilding• Not for use on silicone O-rings (yellow or white) or hoses

ID: C33339T1


6V-2055 186-1530 150 g (5.30 oz) 1

Dielectric Tune-Up Grease

• Silicone grease — lubricate electrical connections• Prevents fusing of sparkplug boots• Prevents corrosion in multipin connectors on wiring harnesses

ID: C33340T1


151-1340 185-4002 9 ml (.33 fl oz)

Silicone Fluids

• For fan drive assemblies and clutches with viscous fluid drives

Part No. Qty. Size For Use In:

8M-0553 1 150 cc 8M-4665 Fan Drive Clutch

Equivalent to Schwitzer Part No. 136874

9M-5165 1 150 cc 2S-5562 Clutch Assembly

7M-3542 Clutch Assembly

9M-8437 Clutch Assembly

Equivalent to Schwitzer Part No. C-138868

4C-6508 1 300 ml 3600 Visconic Damper

Silicone Lubricant

• Silicone grease• Extreme temperature resistance• Lubricant for rubber boots on Caterpillar flexible drive couplings

on marine engines• Not for use on silicone O-rings (yellow or white) or hoses

ID: D01669T1Part No.

Part No. (EAME only) Size Qty.

5N-5561 186-1528 340 g (12 oz) 10

Air Conditioning Pump Lubricants—PAG Oil



emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

• Specially formulated lubricants for use with R-134a Refrigerants• Size: 250 ml• Package quantity: 1

4C-2959 PAG Oil (206-1990 EAME only)• Polyalkylene glycol oil for Sanden compressors• High viscosity refrigerent oil for R-134a• Meets GM spec 9985752

9U-7551 PAG Oil (185-5155 EAME only)• Polyalkylene glycol oil• Low viscosity refrigerent oil for R-134a

4C-2960 POE Oil (185-5141 EAME only)• Polyol ester oil• ISO viscosity 150° refrigerent oil for R-134a

03b.qxp 10/5/06 1:29 PM Page 28

190-8487 Vacuum Pump OilSMCS Code: 4480-039Model: Uninterruptable Power Supply (UPS) 250Warranty: One Year

• Used to service UPS 250 vacuum pump• An annual service schedule for UPS 250 vacuum pump is recommended

Capacity Size Quantity

0.42 to 0.7 l (14 to 24 oz) 1 l (33.8 oz) 1

2G-7781 Sealant for Liquid Filled Rims on Wheel Loaders

• Seals cracks and pinholes in rims

• Use one tube per rim• Quantity: 1 tube

ID: C79599T1

A/C Refrigerant Flushing Solvent

• Flushes lubricant contaminants and solids from A/C system lines• Compatible with CFC, HCFC and HFC refrigerants• Compatible with mineral, ester and PAG oil lubricants• Use in 153-8537 Air Conditioning Component Flusher (solvent recycler)• See flushing unit operators manual for instructions on use

ID: C79518T1


153-8538 185-5131 3.785 l (1 gal)

Vacuum Pump Oil

• Approved for all Caterpillar vacuum pumps• All vacuum pump suppliers recommend changing the vacuum pump

|oil after every pump down to prevent contamination of the next system to be serviced

ID: C79536T1

Part No.Part No. (EAME only) Qty. Size

1U-9763 N/A 12 .95 l (1 qt)

1U-9764 185-4772 4 3.79 l (1 gal)

5P-3975 Rubber Lubricant

• Lubricates rubber to metal during tire mounting and dismounting• Helps prevent rim corrosion and damage to bead surfaces• Renews appearance of rubber and vinyl products• Prevents squeaks in rubber parts• Size: 3.79 l (1 gal)• Quantity: 1




ID: C79551T1

03b.qxp 10/5/06 1:29 PM Page 29

P-80 Assembly LubricantSMCS Code: 0645Warranty: Manufacturer’s

• Specially formulated liquid that lubricates rubber so it is easy to install, remove, or otherwise manipulate• Unique feature—its ability to provide temporary lubrication (Once the work with the rubber is complete, emulsion

rubber lubricant disappears and surfaces return to original condition.)• Provides high degree of lubricity while wet; stays wet long enough to complete the work, then it’s gone; contains

no silicones or other persistent ingredients so lubricity goes away completely• Lubricated parts won’t crumble, tear, or lose their elasticity; lubricant does not harm glass, metal, wood,

or other materials• Keep emulsion rubber lubricant out of freezing or near-freezing temperatures. In colder climates be especially

careful not to leave emulsion rubber lubricant in any unheated area for lengthy periods.


207-1601 207-1600 .95 l (1 quart)

139-2398 Tire Lubricant

• Contains no soaps• Leaves no residue — will not rust rims• Helps seal tire to rim without bonding• Reduces bead damage• Nontoxic, odorless

ID: C79570T1

Caterpillar 119 Cutting Oil

• Straight cutting oil for machining ferrous metal

• Drilling, tapping, honing• Contains chlorine and sulfur

for optimum tool life and finish• Compounded for easy removal

with no troublesome residues

ID: C33265T1


1U-8805 185-5125 4 3.79 l (1 gal)

1U-6516 N/A 1 18.9 l (5 gal)

1U-6517 N/A 1 208 l (55 gal)

Caterpillar 250 Grinding Fluid

• Water soluble cutting oil, grinding fluid and coolant

• Drilling, tapping, honing non-ferrous metals• Grinding on crankshafts, etc.• Compounded for easy removal with no

troublesome residues• Formulated with built-in biocide to contol

bacteria that cause odors and dermatitis


Part No. (EAME only) Qty. Size

1U-8808 185-5126 4 3.79 l (1 gal)

1U-6520 N/A 1 208 l (55 gal)



emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

ID: C44120T1l

Part No.Part No. (EAME only) Qty. Description

4C-6792 N/A 12 .95 l (1 qt)

4C-6793 185-4769 4 3.78 l (1 gal)

4C-6794 185-4770 1 18.93 l (5 gal)

4C-6795 N/A 1 208 l (55 gal)

V.C.I. Oil

• Use for storing vehicles and vehicle components such as engines and transmissions for periods of up to one year

• Protects all ferrous parts when maintained at the proper concentration in a closed container

• Has a vapor phase that is more strongly attracted to bare ferrous metals than water

• Will continue to perform indefinitely as long as it stays sealed in the compartment

• Meets Mil-P-46002A

ReferenceSEHS9031 Special Instructions

03b.qxp 10/5/06 1:29 PM Page 30

ID: C44123T1


4C-6767 185-4759 1 20 l (5 gal)

ID: C44118T1


1U-8809 185-5127 4 3.79 l (1 gal)

1U-6523 N/A 1 208 l (55 gal)

ID: C44119T1


1U-8801 185-5123 4 3.79 l (1 gal)

1U-6526 N/A 1 208 l (55 gal)ID: C79578T1

Part No.Part No. (EAME only) Size Qty. Grit

226-6624 N/A 240 ml (8 fl oz) 1 80

4C-4178 185-5156 3.79 l (1 gal) 1 40

4C-4179 N/A 18.9 l (5 gal) 1 40

4C-4180 N/A 208 l (55 gal) 1 40




Compactor Oil

• Special synthetic oil used in vibrator drum of Compactors

• Packaged in 20 l (5 gal) pails- Large machines take 20 l (5 gal) per drum- Small machines take 10 l (21⁄2 gal) per drum

Caterpillar 450 Rust Preventive Oil

• Water displacing rust preventive oil is more strongly attracted to bare metal than water

• Apply by dipping, brushing, or spraying• Leaves a long lasting, rust preventive film

that protects against rusting for a year in covered storage conditions

• Should be protected from dirt and dust accumulation to prolong its effectiveness

Hydrosolv SI (Lapping Compound)

• Proven efficiency in factory and service shop• Cuts faster and gives superior finish• Pre-mixed, ready to use as it comes from

the container• Available in convenient sizes• Hint: to avoid problems from abrasive

settling out, order smaller containers and rotate your stock to use oldest stock first

ID: C79597T1


1U-6396 185-4776 12 236 ml (8 fl oz)

1U-6395 185-4777 4 3.79 l (1 gal)

O-Ring Assembly Compound

• Retains O-rings in the groove in O-ring face seal (ORFS) fittings during assembly• Holds in both horizontal and vertical positions• Non-toxic• Will not harm hydraulic system components• Not for use on air conditioning systems

Caterpillar 4A Rust Preventive Oil

• Long lasting, heavy-duty waxy film• Apply by dipping, brushing, or spraying• Leaves a long lasting, rust preventive film that

protects from damage by outside condensation, rainfall, etc. up to a year

• Must be removed by solvent or hot alkaline cleaner

03b.qxp 10/5/06 1:29 PM Page 31

Governor OilModel: 3600 Engine

• For 3600 Engine Woodward Governor


136-9642 185-4775 1 .95 l (1 qt)

Automatic Transmission Fluid (ATF)

• Automatic transmission fluid — Type F

ID: C79527T1


9U-7251 N/A 12 .94 l (1 qt)

9U-7252 4 3.79 l (1 gal)

9U-7253 1 18.9 l (5 gal)

9U-7254 1 208 l (55 gal)

Hydraulic Oil Additive

• Low friction additive for some hydraulic systems• Relieves “stick-slip” on noisy hydraulic cylinders• Not for use on machines which have a common sump

for hydraulics, brake, and transmissions

ID: C79569T1


1U-9891 185-4771 0.95 l (1 qt) bottle 12

Oil Stabilizer

• Reduces oil consumption• Reduce engine wear• Helps keep vital engine parts clean• Reduce thermal oil and viscosity breakdown

This product should only be used as needed in the following engines:

Engine Model Engine Serial No.

3406E 5EK1-Up, 5DS1-Up, 6TS1-Up, 1LW1-Up, 2WS1-Up, 1MM1-Up, 4AS1-Up

C-15 6NZ1-82494

C-16 7CZ1-Up

ID: C79574T1


143-3655 185-4774 12 .94 l (1 qt)



emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03b.qxp 10/5/06 1:29 PM Page 32

Conostan™ Oil Standards

• Five blends to cover your expected ranges• Known accuracy• Reliable and readily available• Size: 236 ml (8 fl oz)

Element 4C-8339 4C-8340 4C-8341 4C-8342 4C-8343

Ag 10 ppm 25 ppm 100 ppm — —

AL 10 ppm 25 ppm 100 ppm — —

Cr 5 ppm 10 ppm 25 ppm — —

Cu 10 ppm 25 ppm 100 ppm 500 ppm —

Fe 10 ppm 25 ppm 100 ppm 500 ppm 150 ppm

Mg 10 ppm 25 ppm 100 ppm — —

Mo 5 ppm 10 ppm 25 ppm — —

N2 10 ppm 25 ppm 100 ppm 500 ppm —

Ni 10 ppm 25 ppm 100 ppm — —

Pb 10 ppm 25 ppm 100 ppm — —

Si 10 ppm 25 ppm 100 ppm 500 ppm —

Sn 10 ppm 25 ppm 100 ppm — —

Zn 10 ppm 25 ppm 100 ppm — —

Part No. Qty. Size

4C-8339 1 236 ml (8 fl oz)

4C-8340 1 236 ml (8 fl oz)

4C-8341 1 236 ml (8 fl oz)

4C-8342 1 236 ml (8 fl oz)

4C-8343 1 236 ml (8 fl oz)

4C-8344 1 Consists of:1 each 4C-83391 each 4C-83401 each 4C-83411 each 4C-83421 each 4C-8343

Calibration Fluid

• Fuel injection test benches• Pop Testers

ID: C44121T1


9U-7411 N/A 1 3.79 l (1 gal)

6V-6068 185-4665 1 18.9 l (5 gal)

6V-6067 N/A 1 208 l (55 gal)




Brake Fluid

• Meets DOT and SAE requirements

DOT 3• Use where DOT 3 brake fluid is specified by service

manual or operators guide• Loaders, lift trucks, and service trucks

DOT 5• DOT 5 is for extreme service conditions where higher

than normal temperatures will be encountered or where moisture absorption is a problem

• High performance cars and offroad vehicles

ID: C44249T1


DOT 3

4C-5584 N/A 12 0.47 l (1 pt)

4C-5585 N/A 12 .94 l (1 qt)

4C-5586 185-4663 4 3.79 l (1 gal)

DOT 5

4C-5588 N/A 12 .94 l (1 qt)

4C-5589 185-4664 4 3.79 l (1 gal)

03b.qxp 10/5/06 1:29 PM Page 33

ID: C33327T1

Heet Gasoline Fuel Additive

• For gas engines, removes water from fuel lines, prevents rust and corrosion

ID: D01657T1


269-8292 0.35 l (12 oz) bottle 24

Specialty Products

ID: C33328T1

Caterpillar Manifold Sealer

• Seals and bonds at temperatures up to 1093°C (2000°F)

• Seals male/female joints in segmented exhaust manifolds


Part No. (EAME only) Size Qty.

2P-2333 207-7529 473 ml (16 fl oz) 1

Ether Cylinder

• Cold weather starting aid• Heavy-duty construction• Quick starts from -45.5°C (-50°F)• Easy to install, hand tighten

7N-0296• Fits most 3400 series and smaller engine

applications• For measured shot systems

7X-1062• Fits most 3500 series engine applications• Comes with specially designed filter and foam disc collar to keep impurities out of the system

ID: C44122T1


130-8414 N/A 12 227 g (8 oz)

7N-0296 187-4851 24 509 g (18 oz) — 7.6 cm (3 in) diameter

7X-1062 187-4852 12 594 g (21 oz) — 10 cm (4 in) diameter


Specialty ProductsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

8T-9018 Radiator Repair

• Fills seams and holes in radiators• For temporary in field repairs• Cures in 15 minutes• Withstands normal cooling

system operating pressures• Also see Iron-Stitch Repair Kit

in Salvaging Equipment Section• Size: 14 g (.5 oz)• Quantity: 10

8T-9019 Fuel Tank Repair

• Fill seams and holes in fuel tanks• For temporary in field repairs• Hardens in 15 minutes• Will adhere to fuel

wetted surfaces• Also see 1U-8118 Fuel Tank

Repair Kit for Plastic Fuel Tanks

• Size: 7 g (.25 oz)• Quantity: 10

03c.qxp 10/5/06 1:29 PM Page 34

ID: D01651T1

CT2 Diesel Fuel Winterizer/Anti-Gel

• Prevents filter plugging, waxing and fuel gelling

• Treats 946.35 l (250 gal)• Reduces need for blends with #1 fuel


269-1949 0.95 l (1 qt) jug 12

CT2 Antifreeze and Rust Guard

• Provides corrosion protection and prevention for air breaking system

• Anti-static and anti-fungal• Also used in pneumatic hose lines


272-5745 0.95 l (1 qt) bottle 12


Specialty ProductsChem


ID: C44041T1

Part No. Qty. Size

4C-4217 12 207 ml (7 fl oz)

4C-4218 12 710 ml (24 fl oz)

ID: C79581T1

Orange Hand Cleaner

• Excellent hand cleaning for dirty, oily, greasy hands. For exceptionally dirty or greasy hands, use Hand Cleaner with Pumice.

• Mild citrus smell• Contains Corn Huskers Lotion, aloe, lanolin and jojoba to help prevent dermatitis• Contains NO petroleum solvents• Biodegradable• Works with or without water

ID: C41473T1

Part No.Part No. (EAME only) Description Size Qty.

9U-5026 N/A Orange Hand 225 ml (7.5 fl oz) 12Cleaner (smooth)

9U-5027 185-4000 Orange Hand 3.8 l (1 gal) 4Cleaner (smooth)

9U-5028 N/A Orange Hand 225 ml (7.5 fl oz) 12Cleaner (w/ pumice)

9U-5029 185-4001 Orange Hand 3.8 l (1 gal) 4Cleaner (w/ pumice)

9U-5030 Wall Mount Bracket 1for 1 gal container

All 1 gallon jugs come with individual pumps included. 7.5 fl.oz. bottles haveself-sealing flip top caps.

Anti-Spatter Compound

• Protects tips on MIG welding torches from weld spatter

03c.qxp 10/5/06 1:29 PM Page 35

Heavy-Duty Hand Cleaners

• Heavy-duty hand cleaner for oil, grease, tar, grime, soil, resins, printer’s ink, epoxies, paint, and cements

• Works faster than standard orange hand cleaner• Fine ground pumice provides a deep scrubbing action

to remove difficult grease and grime• Pleasantly scented, containing lanolin and aloe• Will not irritate most hands and does not leave

a greasy residue

ID: C80422T1


1 191-6310 Heavy-Duty Hand Cleaner 15 oz

2 191-6311 Heavy-Duty Hand Cleaner 128 oz

ID: C79348T1

Part No. Towel Size Quantity Units per case Minimum purchase

144-3393 266 x 311.2 mm 72 per bucket 6 1 case(10.5 x 12.25 in)

144-3394 203 x 311.2 mm 250 per display — 250 count counter display (8.0 x 12.25 in) and one bucket

Gojo Lemon with Pumice Hand Cleaner

• Removes grease, tar, and oil from hands, with or without water

ID: D01627T1


269-1937 2.04 kg (4.5 lb) 4plastic bucket

Zep Cherry Bomb Hand Cleaner

• Multipurpose cherry-scented hand cleaner for dirt, grease, and oils

ID: D01633T1


Specialty ProductsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

Orange Hand Wipes

• Premoistened, heavy-duty towel with pumice like performance• Removes grease, adhesive, oil, lubricant, ink, wax, sealant, paint, and much more• Quickly absorbs dirt and grease from your hands• Contains germ fighting Triclosan and hand conditioners• Available in two sizes — 72 count bucket and 250 count counter display which includes one bucket• Individually packaged towels are easy to store and carry (works great for field repair trucks, etc.)

— keep in a pocket in freezing temperatures


269-1939 3.79 l (1 gal) plastic jug 4

03c.qxp 10/5/06 1:29 PM Page 36

Arm and Hammer Baking Soda

• Deodorizer/cleaner

Cascade Pure Rinse Dishwasher Soap

• General all-purpose cleaner

Ice-A-Way Rock Salt

• Effective to temperatures of -15° C (5° F)• Screened for uniform crystal size

PackagePart No. Size Quantity

269-1941 22.68 kg (50 lb) yellow poly bag 1

Ice Foe

• Melts 3 times more ice than competition at rate of 0.059-0.12 l (2-4 oz) per 0.84 square meter (1 sq yd)

• Effective to -45.55° C (-50° F)


269-1950 45.36 kg (100 lb) carton 1

Deep 6 Wasp and Hornet Killer

• Sprays up to 6.7 m (22 ft)• Non-conductive up to 32,500 volts• From the suppliers of Raid

ID: D01639T1


269-1942 0.41 l (14 oz) aerosol can 12

DYKEM Hi Spot Bluing Paste

• Intensely blue, soft, uniform paste that spreads easily and evenly to show high spots on bearings

• Used on flat bearing surfaces of lathes, planers, and milling machines


280-1555 15.59 g (0.55 oz) tube 36


Specialty ProductsChem



269-8271 0.45 kg (1 lb) box 1


269-1948 4.54 l (1.2 gal) plastic jug 1

03c.qxp 10/5/06 1:29 PM Page 37

Paints

Caterpillar Enamel Topcoats

• Pure, lead free industrial enamel suitable for interior or exterior use on earthmoving, construction and material handling equipment, trucks, engines, machinery, and metal buildings

• Formulated to produce a finish that sets up in minutes, is tack-free in a few hours, and dries overnight to a hard film

• Very resistant to fading, chalking, cracking, and chipping• Can be applied directly to either wood or metal without using a primer

Package Part No. Description Quantity Size / Type

261-7012 1 Yellow Paint High Heat, High Gloss 12 340 g (12 oz) Aerosol Can

4C-4200 Yellow Paint High Gloss 12 340 g (12 oz) Aerosol Can

206-6417 Hiway Yellow Paint High Gloss 12 340 g (12 oz) Aerosol Can

4C-4202 Mojave Brown Paint Medium Gloss 12 340 g (12 oz) Aerosol Can

243-5451 Power Module White Paint High Gloss 12 340 g (12 oz) Aerosol Can

4C-4198 Black Paint Medium Gloss 12 340 g (12 oz) Aerosol Can

4C-5842 Black Paint Flat 12 340 g (12 oz) Aerosol Can

4C-5843 Black Paint High Gloss 12 340 g (12 oz) Aerosol Can

9U-7946 Bright Beige Paint Medium Gloss 12 340 g (12 oz) Aerosol Can

9U-7948 Dawn Gray Paint Medium Gloss 12 340 g (12 oz) Aerosol Can

9U-7950 Green Paint High Gloss for Barber-Greene Equipment 12 340 g (12 oz) Aerosol Can

127-4966 Dark Gray Paint Medium Gloss 12 340 g (12 oz) Aerosol Can

127-4967 Slate Gray Paint High Gloss 12 340 g (12 oz) Aerosol Can

140-2576 Matterhorn White Paint High Gloss 12 340 g (12 oz) Aerosol Can

173-4060 Charcoal Gray Paint High Gloss 12 340 g (12 oz) Aerosol Can

243-5459 Cat Gray 61 Paint High Gloss 12 340 g (12 oz) Aerosol Can

261-7013 1 Yellow Paint, High Heat, High Gloss 4 3.8 l (1 Gal) Can

4C-4184 Yellow Paint High Gloss Fast Drying 4 3.8 l (1 Gal) Can

4C-4192 Yellow Paint High Gloss Fast Drying 1 19 l (5 Gal) Pail

4C-4207 Yellow Paint High Gloss Fast Drying 1 208 l (55 Gal) Drum

4C-6129 Yellow Paint High Gloss 4 3.8 l (1 Gal) Can

4C-6122 Yellow Paint High Gloss 1 19 l (5 Gal) Pail

4C-6127 Yellow Paint High Gloss 1 208 l (55 Gal) Drum

4C-4185 Hiway Yellow Paint High Gloss 4 3.8 l (1 Gal) Can

4C-4193 Hiway Yellow Paint High Gloss 1 19 l (5 Gal) Pail

4C-4208 Hiway Yellow Paint High Gloss 1 208 l (55 Gal) Drum

4C-4186 Mojave Brown Paint Medium Gloss 4 3.8 l (1 Gal) Can

243-5450 Power Module White Paint High Gloss 4 3.8 l (1 Gal) Can

249-1817 Power Module White Paint High Gloss 1 19 l (5 Gal) Pail

4C-4183 Black Paint Medium Gloss 4 3.8 l (1 Gal) Can

4C-4191 Black Paint Medium Gloss 1 19 l (5 Gal) Pail

4C-4206 Black Paint Medium Gloss 1 208 l (55 Gal) Drum

9U-7947 Bright Beige Paint Medium Gloss 4 3.8 l (1 Gal) Can

9U-7949 Dawn Gray Paint Medium Gloss 4 3.8 l (1 Gal) Can

243-5458 Cat Gray 61 Paint High Gloss 4 3.8 l (1 Gal) Can

9U-7951 Green Paint High Gloss for Barber-Greene Equipment 4 3.8 l (1 Gal) Can


PaintsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03c.qxp 10/5/06 1:29 PM Page 38


140-2577 Matterhorn White Paint High Gloss 4 3.8 l (1 Gal) Can

140-2578 Matterhorn White Paint High Gloss 1 19 l (5 Gal) Pail

225-6502 Black Paint High Gloss 4 3.8 l (1 Gal) Can

9U-7714 Black Paint Flat 4 3.8 l (1 Gal) Can

9U-7719 Yellow Paint High Gloss 3.5 VOC 4 3.8 l (1 Gal) Can

9U-7720 Yellow Paint High Gloss 3.5 VOC 1 19 l (5 Gal) Pail

249-1816 Power Module White Paint High Gloss 3.5 VOC 4 3.8 l (1 Gal) Can

9U-7717 Black Paint Medium Gloss 3.5 VOC 4 3.8 l (1 Gal) Can

9U-7718 Black Paint Medium Gloss 3.5 VOC 1 19 l (5 Gal) Pail

9U-7725 Yellow Paint High Gloss Water Reducible 2.8 VOC 4 3.8 l (1 Gal) Can

9U-7726 Yellow Paint High Gloss Water Reducible 2.8 VOC 1 19 l (5 Gal) Pail

9U-7731 Black Paint Medium Gloss Water Reducible 2.8 VOC 4 3.8 l (1 Gal) Can

9U-7732 Black Paint Medium Gloss Water Reducible 2.8 VOC 1 19 l (5 Gal) Pail

249-1815 Power Module White Paint High Gloss Water Reducible 2.8 VOC 4 3.8 l (1 Gal) Can

249-1814 Power Module White Paint High Gloss Water Reducible 2.8 VOC 1 19 l (5 Gal) Pail1 For use with ACERT engines ONLY

Caterpillar Yellow Primer Paint

• Pure, lead free rust-inhibitive industrial primer sealer with excellent adhesionand durability

• Specially formulated to resist rusting, peeling, and fading• Dries tack-free in a few hours and overnight to hard durable coating

with excellent weather resistance• Should be recoated with Caterpillar enamel topcoat paint


4C-4190 Yellow Primer Paint 4 3.8 l (1 Gal) Can

4C-4197 Yellow Primer Paint 1 19 l (5 Gal) Pail

4C-4211 Yellow Primer Paint 1 208 l (55 Gal) Drum

4C-4205 Yellow Primer Paint 12 340 g (12 oz) Aerosol Can

Caterpillar Yellow High Gloss Urethane Paint

• Specially formulated lead-free industrial 2K polyurethane for repairing or touching up urethane finishes

• Excellent adhesion to a urethane finish when the surface is properly sandedand prepared

• Produces a finish that sets up in minutes, is tack-free in a few hours, and dries overnight to a hard high-gloss finish

• Very resistant to fading, chalking, cracking, and chipping• Recommended for equipment requiring long term outside durability

and exposure to the elements


9U-7721 Yellow Urethane Paint, 4 3.8 l (1 Gal) CanHigh Gloss

Caterpillar Urethane Hardener

• For professional or industrial use only• Add to 9U-7721 Caterpillar Yellow Urethane Paint

in a 3:1 paint to hardener ratio• Faster drying time• Enhances gloss, durability, and chemical resistance• Used by professional painters• Automotive-quality product line• Follow Caterpillar label directions for use:

Mix paint and hardener thoroughly before applicationDO NOT mix more than will be used within a 3-hour periodDO NOT use paint that has started to thicken; high temperature will reducepot life of paint


9U-7723 Urethane Hardener 4 3.8 l (1 Gal) Container

Caterpillar Paint and Primer Thinner

• Excellent solvent to be used with Caterpillar enamel paint and primer• Leaves the film quickly and will not impair the setting-up or tack-free time

of the enamel or primer paint• Evaporates fast and is less likely to cause sagging and running• Because of its high solvency, a relatively small amount of thinner is needed

to reduce paint to a spray consistency


4C-4189 Paint and Primer Thinner 6 3.8 l (1 Gal) Can

4C-4196 Paint and Primer Thinner 1 19 l (5 Gal) Pail

4C-4210 Paint and Primer Thinner 1 208 l (55 Gal) Drum


PaintsChem


03c.qxp 10/5/06 1:29 PM Page 39

Caterpillar Paint and Primer Thinnerwith Retarder

• Excellent solvent to be used with Caterpillar enamel paint and primer• Leaves the film slowly to provide flow and leveling in hot or dry conditions

and on large equipment where slower drying is desired• Evaporates slowly and is less likely to cause dry over-spray• Because of its high solvency, a relatively small amount of thinner is needed

to reduce paint to a spray consistency


4C-6130 Paint and Primer Thinner 6 3.8 l (1 Gal) Canwith Retarder

Caterpillar Urethane Paint Reducer

• Specially formulated to be used with Caterpillar urethane paints• Because of its high solvency, a relatively small amount of thinner is needed

to reduce paint to a spray consistency• Excellent thinner for cleaning and flushing spray equipment after

application use


9U-6360 Urethane Paint Reducer 6 3.8 l (1 Gal) Can

Caterpillar Paint and Decal Remover

• Quickly removes paint, decals, varnishes, lacquers, enamels, and syntheticfinishes on wood and metal without damaging the surface

• Lower Variable Organic Compound (VOC) formula• Formulated to be used as packaged — no further dilution is required• Do not use on plastics, vinyl, linoleum, fiberglass, or synthetic fibers


263-6148 Paint and Decal Remover 12 340 g (12 oz) Aerosol Can

263-6151 Paint and Decal Remover 6 3.8 l (1 gal) Can

Caterpillar Black Muffler Paint

• Formulated to resist temperatures up to 538°C (1000°F)• Once properly cured, forms a hard, lasting finish that resists salt spray

and will not chip or peel• Ideal for use on mufflers, exhaust systems, or any surface exposed to very

high heat


4C-4199 Black Muffler Paint 12 340 g (12 oz) Aerosol Can

Caterpillar Aluminum-Safe Paint Stripper

• Strips iron, steel, even aluminum parts without damage or discoloration• Useful in cold tanks• Can be used warm [up to 65.6°C

(150°F)] for faster cleaning• Just soaks the paint off


4C-8651 Aluminum-Safe Paint Stripper 4 3.8 l (1 gal)

4C-8652 Aluminum-Safe Paint Stripper 1 18.9 l (5 gal)

4C-8653 Aluminum-Safe Paint Stripper 1 208 l (55 gal)


PaintsCh

emic

als,

Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

s

03c.qxp 10/5/06 1:29 PM Page 40

Shop Supplies and Tools Catalog 2007 1

Nomenclature Index

AABRASIVEADAPTER 2-8BELT 2-24BRUSH 2-4, 2-11, 2-18CLEANING 2-19CRANKSHAFT 2-24CUT-OFF WHEEL 2-20CUTTING 2-20DEBURRING 2-26DISC 2-6, 2-10, 2-12 to 14EMERY PAPER 2-23FILE 2-27FLAP BRUSH 2-5FLAP WHEEL 2-18 to 19GRINDING 2-13, 2-17 to 20GRINDING WHEEL 2-17HOLDER 2-11MANDREL 2-20PAD 2-15, 2-22POLISHING 2-24RECONDITIONING 2-12SANDING 2-15, 2-22, 2-24SURFACE RECONDITIONING 2-3 to 6,

2-10 to 14, 2-17 to 20,2-22, 2-24, 2-26

VALVE STEM 2-18WHEEL 2-17 to 20WIRE BRUSH 2-3 to 4

ACCESSORYADAPTER 2-49, 2-113AIR 1-73BOX 1-85CABINET 1-79CASE 1-85DISC 1-73DRILL 2-21, 2-30DRILL SHARPENING 2-21EXTENSION 2-30FLOOR MAT 2-110FLUID EXTRACT TOOL 2-49, 2-112 to 114FLUID SAMPLING 2-49, 2-112 to 114GRINDING 1-73, 2-21HAND OPERATED 1-73HAND TOOL 1-64HOSE 1-73HYDRAULIC 1-64HYDRAULIC WRENCH 1-63INSERT 2-56JAW CAP 2-57JAW INSERT 2-56 to 57LIFTING 1-8, 1-89MUD FLAP 2-112O-RING SEAL 2-49, 2-112 to 114OIL 2-49, 2-112 to 114PIPE VISE 2-56PLATE 1-89REACTION ARM 1-63REDUCER 2-49, 2-113REPAIR PART 2-49, 2-112 to 114SEAL 2-49, 2-112 to 114SHACKLE 1-8, 1-89SHOP 2-110SLING 1-8, 1-89STAINLESS STEEL 1-79STORAGE 1-85SURFACE RECONDITIONING 1-73, 2-21TOOL STORAGE 1-79VISE 2-56 to 57WHEEL 2-21WRENCH 1-64

ACIDCOIL CLEANER 3-10DESCALANT 3-10HYDROSOLV CLEANER 3-10PHOSPHORIC 3-10PRESSURE WASHER 3-10SCALE 3-10

ADAPTERABRASIVE 2-8

ACCESSORY 2-49, 2-113ADAPTER GROUP 2-7, 2-10BEARING 1-48, 1-59BOX WRENCH 1-59BUSHING 1-48CARRYING CASE 2-110CYLINDER 1-22 to 23DISC 2-16 to 17DRIVER 1-59ELECTRICAL PRODUCT 2-110FLUID EXTRACT TOOL 2-49, 2-113FLUID SAMPLING 2-49, 2-113FLYWHEEL 1-39GRINDING 2-16 to 17HAND TOOL 1-1 to 2, 1-5 to 6, 1-9, 1-12,

1-15, 1-22, 1-48, 1-54, 2-18HOLDER 2-16 to 17HYDRAULIC 1-22 to 23MAIN BEARING 1-59MAIN CAP 1-59MANDREL 2-16 to 17MICROFILM VIEW 2-110MULTIPLIER 1-22 to 23OIL 2-49, 2-113OPEN END WRENCH 1-12PIN REMOVER 1-48RACE 1-48REDUCER 2-49, 2-113REPAIR 1-22 to 23REPAIR PART 1-12, 1-39SERVICEMAN’S HAND TOOL 1-1 to 2,

1-12, 1-22SOCKET 1-1 to 2, 1-5 to 6, 1-9,

1-15, 1-22, 1-54STAND 1-22 to 23SURFACE RECONDITIONING 2-16 to 18TOOL 1-59TOOL GROUP 2-18TOOL SET 1-1 to 2, 1-12, 1-22TORQUE 1-22 to 23, 1-59TORQUING TOOL 1-59TRANSFORMER 2-110WHEEL 2-16 to 17WRENCH 1-12, 1-59

ADHESIVEADHESIVE & SEALANT 3-1, 3-4 to 5APPLICATOR 3-5BONDING 3-1, 3-4 to 5, 3-7 to 8, 3-34CAULKING 3-7 to 8CHEMICAL 3-7 to 8, 3-21, 3-31COMPOUND 3-31EPOXY 3-34FLEXIBLE 3-6FUEL TANK REPAIR KIT 3-34GASKET MATERIAL 3-6HEAT 3-8LAPPING 3-31LAPPING COMPOUND 3-31LIQUID GASKET 3-6LUBRICANT 3-7 to 8, 3-21, 3-31MIXER 3-5NOZZLE 3-5NYLON 3-34PRIMER 3-8SEALANT 3-3 to 6, 3-8, 3-34SILICONE 3-7 to 8WINDOW 3-8WINDOW INSTALLATION 3-8WINDSHIELD 3-7 to 8

AEROSOLBATTERY 3-26CABLE 3-26CHAIN 3-26CLEANING 3-26COMPOUND 3-40CRACK DETECTION 3-23DETECTION 3-23DEVELOPER 3-23DEVELOPER FOR CRACK DETECTION 3-23INSPECTION 3-23LIQUID PENETRANT KIT 3-23LUBRICANT 3-26

OIL 3-26PAINT 3-38PAINT PRODUCTS 3-25, 3-38PAINT REMOVER 3-40PENETRANT 3-23PENETRANT FOR CRACK DETECTION 3-23PENETRATE OIL 3-26RUST PENETRATING 3-26RUST PREVENTIVE 3-26SOLVENT 3-25

AIR CONDITION TOOLAIR CONDITIONING 3-29FLUSHING 3-29SOLVENT 3-29

AIR CONDITIONINGAIR CONDITION TOOL 3-29AIR TOOL OIL 3-29COMPRESSOR 3-29FLUSHING 3-29PUMP OIL 3-29REFRIGERANT 3-29SOLVENT 3-29VACUUM PUMP 3-29

AIR POWEREDADHESIVE & SEALANT 3-7CAULKING 3-7CLEANING 1-73 to 74GUN 1-73 to 74, 3-7PNEUMATIC 1-73 to 74PNEUMATIC TOOL 1-73 to 74

ALKALINEALUMINUM SAFE 3-10CABINET WASHER 3-10CHEMICAL 3-10CLEANING 3-8, 3-10, 3-25CONCENTRATE 3-10DEGREASER 3-10, 3-25DETERGENT 3-8, 3-10, 3-25HYDROSOLV CLEANER 3-10PRESSURE WASHER 3-10RUST PROTECTION 3-8, 3-25SOAP 3-10, 3-25

ALLEN WRENCHHAND TOOL 1-3, 1-6, 1-8 to 9,

1-42 to 43HEX BIT SET 1-3, 1-15, 1-42HEX KEY WRENCH 1-6, 1-9, 1-15, 1-43WRENCH 1-3, 1-8 to 9, 1-42

ALUMINUMTAPE 2-118, 2-125

AMMETERCARRYING CASE 1-85CASE 1-85DIAGNOSTIC 1-85MEASURING 1-85PLASTIC CASE 1-85REPAIR PART 1-85

ANTI-FREEZEADDITIVE 3-12ANTI-FREEZE ADDITIVE 3-12ANTI-FREEZE CONCENTRATE 3-12CHEMICAL 3-35COOLANT 3-12 to 13DISTILLATION 3-12HOSE 3-35PNEUMATIC 3-35PNEUMATIC TOOL 3-35

APPLICATORADHESIVE 3-5

ASSEMBLYBRAKE 2-49CLUTCH 3-28COMPOUND 3-31COUPLING 1-8

DIFFERENTIAL 1-8DISASSEMBLY TOOL 1-16DISPENSER KIT 3-31DRIVE 1-16GAUGE GROUP 1-8HEX BIT SET 1-15HYDRAULIC 1-16HYDROSTAT 1-8LIFTING 1-88O-RING 3-31PLUG 2-49PRESSURE 1-8PUMP 1-16SEAL 2-49SLING 1-88SOCKET 1-15 to 16, 1-31SOCKET WRENCH 1-43TESTING 1-8TRANSMISSION 1-88TRANSPARENT 2-49WRENCH 1-43

ATTACHMENTBRACKET 2-90HARD HAT 2-90

AXLEDRIVE LINE 1-31

BBALLASTCHOP SAW 2-72ELECTRIC LIGHT 2-72FLUORESCENT LIGHT 2-72LIGHT 2-72PORTABLE LIGHT 2-72TUBE 2-72WORK LIGHT 2-72

BARBLADE 1-46BREAKER BAR 1-1 to 9, 1-12, 1-20, 1-46CROW BAR 1-2 to 9, 1-46HAND TOOL 1-6, 1-9JIMMY BAR 1-2 to 9, 1-46PRY BAR 1-1 to 9, 1-12, 1-20, 1-46REACTION 1-34SERVICEMAN’S HAND TOOL 1-1, 1-3,

1-12, 1-20SOCKET 1-43TOOL SET 1-1, 1-3, 1-12, 1-20TORQUE 1-61WRENCH 1-43, 1-61

BASEHAND TOOL 1-85MULTIPLIER 1-23UNIT 1-23

BATTERYAEROSOL 3-26AUTOMOTIVE 2-65BATTERY POST SET-POS/NEG 2-62BATTERY STARTING SYSTEM 2-61 to 63BOOSTER 2-61 to 63BOOSTER CABLE BATTERY 2-61 to 62BULB 2-67 to 68CABLE 2-61 to 63CLAMP 2-61 to 62CLEANING 3-26COMMERCIAL 2-65CORDLESS 1-75 to 76DIAGNOSTIC 2-69ELECTRICAL PRODUCT 2-68 to 69EXTRA HEAVY DUTY 2-63FLASHLIGHT 2-67 to 69GREASE GUN 1-57INSPECTION LIGHT 2-68 to 69JUMPER CABLES BATTERY 2-61LAMP 2-67 to 68LEXAN PLUG STARTING SYS 2-62LIGHT 2-68 to 69LIGHTING 2-70

ADAPTER cont. AEROSOL cont. ASSEMBLY cont.

nomen.qxd 9/15/06 2:17 PM Page 1

Nomenclature Index

2 Shop Supplies and Tools Catalog 2007

LUBRICATION 1-57MAINTENANCE AIDS 3-26MARINE ENGINE 2-65MEASURING 2-69MOUNTED 2-62PERSONAL USE 2-68 to 69PLUG-IN STARTING SYS 2-62 to 63POLARITY 2-62POWER 2-61 to 63PROTECTIVE 3-26RECHARGEABLE SYSTEM 2-69SAFETY 2-68 to 69SERVICE VEHICLE 2-62SOCKET 2-61 to 63

BATTERY CHARGERBATTERY CHARGER RACK 2-59BOOSTER 2-59 to 60BUS BAR SET BATT CHARGER 2-59CHARGER 2-59 to 60, 2-69COMMERCIAL 2-60FAST-BATTERY CHARGER 2-60MULTI-BATTERY 2-59PORTABLE 2-60RECHARGER 2-59 to 60

BATTERY SERVICEEQUIPMENTGROWLER ARMATURE TEST 2-60TESTER 2-60

BEAD BLAST EQUIPMENTCHEMICAL RESISTNT GLOVE 2-96GLOVES 2-96PERSONAL USE 2-96SAFETY 2-96

BEADLESS TIRELUBRICANT 3-29MOUNTING TIRE 3-29POWER TRAIN TOOL 3-29RIM LUBRICANT 3-29RUBBER 3-29WHEEL & TIRE 3-29

BEARINGADAPTER 1-48, 1-59HAND TOOL 1-48MAIN BEARING 1-59MAIN CAP 1-59MEASURING 1-53MEASURING TOOL 1-53PIN REMOVER 1-48RACE 1-48TOOL 1-59TORQUE 1-59WRENCH 1-59

BELTABRASIVE 2-24CRANKSHAFT 2-24POLISHING 2-24SANDING 2-24SURFACE RECONDITIONING 2-24

BENCHCASE 1-85INSERT 1-85PEDESTAL 2-21SURFACE RECONDITIONING 2-21WHEEL 2-21

BITAIR REGULATED 2-30AIRCRAFT DRILL 2-30COBALT DRILL 2-29DRILL 2-28 to 30, 2-38 to 39,

2-41 to 42, 2-46ENGINE 1-15ENGINE TOOL 1-15, 2-28EXTRA HEAVY DUTY 2-29HAND TOOL 1-8 to 9, 1-15, 1-45HEX BIT SET 1-15, 1-31HEX WRENCH DISPLAY 1-31METRIC 2-30, 2-41 to 42

REDUCED SHANK 2-28, 2-30, 2-38 to 39, 2-41 to 42

REPLACEMENT 1-31SOCKET 1-5, 1-31, 1-43STANDARD 2-28 to 29, 2-38 to 39WRENCH 1-31

BLACK LIGHT LEAKDETECTIONCARRYING CASE 3-24DIAGNOSTIC 3-24ELECTRIC 3-24FILTER 3-24FLUORESCENT 3-24LEATHER JACKET 3-24LIGHT 3-24PERSONAL USE 3-24RADIANT HEATER 3-24SAFETY GLASSES 3-24ULTRA-VIOLET LEAK DETECTION 3-24

BLADEBAR 1-46BREAKER BAR 1-46HACKSAW 1-3, 1-45, 1-76HAND TOOL 1-3, 1-45, 1-54, 1-76KNIFE 1-54RAZOR BLADE 2-27RAZOR KNIFE 1-54REPLACEMENT 1-54SABER 1-45, 1-76SAW 1-3, 1-45, 1-76SERVICEMAN’S HAND TOOL 1-45, 1-54,

1-76TOOL 1-45UTILITY KNIFE 1-54

BLANKETFIRST AID 2-79FIRST AID BLANKET 2-79PERSONAL USE 2-79SAFETY 2-79WELDING PROTECTION 2-79

BLOCKBOX 1-85CASE 1-61, 1-85CHEMICAL 3-2COMPRESSOR 1-85ENGINE REPAIR 3-2FOAM 1-61, 1-85FOAM PAD 1-85GROUP 1-85HAND TOOL 1-50HYDROSTAT 1-85INSERT 1-61, 1-85PACKING 1-85PADDING 1-61, 1-85PLASTIC CASE 1-85POWER TRAIN TOOL 1-85REPAIR PART 1-61, 1-85STORAGE 1-61, 1-85TAPE 3-2TORQUE 1-61WHEEL & TIRE 1-85WRENCH 1-61

BOLT EXTRACTORBOLT REMOVER 2-44 to 46COLLET 2-46EXTRACTOR 2-46HAND TOOL 2-44 to 45HOUSING 2-46SCREW 2-44 to 45SCREW EXTRACTOR 2-44 to 45SERVICEMAN’S HAND TOOL 2-44 to 45STUD REMOVER 2-46TOOL SET 2-44 to 45

BOLT REMOVERBOLT EXTRACTOR 2-44 to 46COLLET 2-46EXTRACTOR 2-46 to 47HAND TOOL 2-44 to 45HOUSING 2-46

SCREW 2-44 to 45SCREW EXTRACTOR 2-44 to 45SERVICEMAN’S HAND TOOL 2-44 to 45STUD REMOVER 2-46 to 47TOOL SET 2-44 to 45

BONDINGADHESIVE 3-1, 3-4 to 5, 3-7 to 8, 3-34ADHESIVE & SEALANT 3-1, 3-4 to 5, 3-7CAULKING 3-7EPOXY 3-5, 3-34FLAMMABLE 3-4FLEXIBLE GASKET 3-7FORM-IN-PLACE GASKET 3-7FUEL TANK REPAIR KIT 3-34GASKET MATERIAL 3-7HIGH TEMP 3-7MIXER CUP 3-5NYLON 3-34R.T.V. 3-7RUBBER 3-7SEALANT 3-4, 3-34SILICONE 3-7 to 8WINDOW INSTALLATION 3-8WINDSHIELD 3-7 to 8

BOOSTERBATTERY 2-61 to 63BATTERY CHARGER 2-59 to 60BATTERY CHARGER RACK 2-59BATTERY STARTING SYS 2-61 to 63BUS BAR SET BATT CHARGER 2-59CABLE 2-61 to 63CHARGER 2-59 to 60COMMERCIAL 2-60EXTRA HEAVY DUTY 2-63FAST-BATTERY CHARGER 2-60LEXAN PLUG STARTING SYS 2-62MOUNTED 2-62MULTI-BATTERY 2-59PLUG-IN STARTING SYS 2-62 to 63POLARITY 2-62PORTABLE 2-60POWER 2-61 to 63RECHARGER 2-59 to 60SERVICE VEHICLE 2-62SOCKET 2-61 to 63

BOX WRENCHADAPTER 1-59EXTENSION 1-2 to 3, 1-51, 1-59FRAME & HITCH TOOL 1-39HAND TOOL 1-39, 1-59POWER TRAIN TOOL 1-59SERVICEMAN’S HAND TOOL 1-39SUSPENSION 1-39TOOL SET 1-39TORQUE 1-2 to 3, 1-51, 1-59TORQUING TOOL 1-59WRENCH 1-2 to 3, 1-39, 1-51, 1-59

BRACEPIPE VISE 2-58

BRACKETATTACHMENT 2-90BOLT 2-129CRANKSHAFT 1-88ENGINE TOOL 1-88FUEL SYSTEM TOOL 1-88FUEL TANK TOOL 1-88GRINDING 2-16 to 18HARD HAT 2-90HOIST 1-88HOLDER 2-16 to 18INDICATOR 2-129LIFTING 1-88LINER 1-88LINK 1-88REMOVAL 2-129SUPPORT 2-16 to 18SURFACE RECONDITIONING 2-16 to 18TRANSMISSION 2-129VALVE STEM 2-16 to 18WHEEL 2-16 to 18

BRAKEASSEMBLY 2-49AUTO BRAKE FLUID 3-33COLUMN 2-35CYLINDER 1-33FLUID 3-33HAND TOOL 1-36HI TEMP BRAKE FLUID 3-33HITCH 1-33HOUSING 2-35MAINTENANCE AIDS 3-33MOISTURE RESIS BRAKE FLUID 3-33PLUG 2-49SEAL 2-49SHOP FLUID 3-33SOCKET 1-33SPRING 1-36STEERING 2-35SUPPORT 2-35TAP 2-35TRANSPARENT 2-49

BREAKER BARBAR 1-1 to 9, 1-12, 1-20, 1-46BLADE 1-46CROW BAR 1-2 to 9, 1-46HAND TOOL 1-1, 1-7, 1-14,

1-20 to 21, 1-54JIMMY BAR 1-2 to 9, 1-46PRY BAR 1-1 to 9, 1-12, 1-14,

1-20 to 21, 1-46REPAIR KIT 1-20REPAIR PART 1-20SERVICEMAN’S HAND TOOL 1-1, 1-3, 1-7,

1-12, 1-14, 1-20 to 21, 1-54SOCKET 1-20TOOL SET 1-1, 1-3, 1-7, 1-12,

1-14, 1-20 to 21WRENCH 1-1, 1-7, 1-14, 1-21, 1-54

BRUSHABRASIVE 2-4, 2-11, 2-18CLEANING BRUSH 2-4 to 5CYLINDER 2-4GRINDING 2-18HAND TOOL 1-55 to 56HOLDER 2-11PAINT 1-56POLISHING 2-5REPAIR GROUP 3-2SCRATCHER BRUSH 1-55 to 56SERVICEMAN’S HAND TOOL 1-55 to 56SURFACE RECONDITIONING 2-3 to 5,

2-11, 2-18TRACK 3-2TUBE BRUSH 2-5VALVE STEM 2-18WHEEL 2-3, 2-18WIRE 2-3WIRE BRUSH 2-4

BULBBATTERY 2-67 to 68ELECTRIC LIGHT 2-71 to 72ELECTRICAL PRODUCT 2-110FLASHLIGHT 2-67 to 68FLUORESCENT LIGHT 2-71LAMP 2-67 to 68, 2-71 to 72, 2-110LIGHT 2-71MICROFILM VIEW 2-110PORTABLE LIGHT 2-71TRANSFORMER 2-110ULTRA-VIOLET LEAK DETECTION 3-24

BUSHINGADAPTER 1-48HAND TOOL 1-48PIN REMOVER 1-48

CCABINETACCESSORY 1-79COVER 1-80

BATTERY cont. BIT cont. BOLT REMOVER cont.



Nomenclature Index

HAND TOOL 1-82 to 83LOCK 1-82SERVICEMAN’S HAND TOOL 1-82 to 83STORAGE 1-80 to 83TOOL BOX 1-80 to 83TOOL CHEST 1-82 to 83TOOL STORAGE 1-79TOP DECK 1-80WAREHOUSE EQUIPMENT 1-82

CABLEAEROSOL 3-26BATTERY 2-61 to 63BATTERY STARTING SYS 2-61 to 63BOOSTER 2-61 to 63CHAIN 3-26ELECTRICAL 2-124, 2-129FASTENER 2-124, 2-129LUBRICANT 3-26NON-AEROSOL 3-26PLUG-IN STARTING SYS 2-62POWER 2-61 to 63RUST PENETRATING 3-26RUST PREVENTIVE 3-26SOCKET 2-61 to 63TIE 2-124, 2-129

CALIBRATION FLUIDCHEMICAL 3-33DIESEL FUEL 3-33FUEL 3-33FUEL INJECTOR 3-33INJECTION 3-33INJECTOR 3-33

CALIPERENGINE LIFTING & POSITIONING 2-129ENGINE OVERHAUL 2-129ENGINE RE-BUILD 2-129ENGINE REPAIR 2-129ENGINE ROLL-OVER TOOL 2-129WASHER 2-129

CAMSHAFTBREAK-IN LUBRICANT 3-27EXTENSION 1-59EXTREME PRESSURE LUBE 3-27LUBRICANT 3-27TORQUE 1-59

CANDLEAIR LEAK DETECTION 3-23BOMB 3-23LEAK DETECTION 3-23SMOKE CANDLE 3-23

CAPHOSE 2-52 to 55NIPPLE 1-8PLUG 2-49 to 55POWER TRAIN 1-8PRESSURE 1-8PROTECTION 2-52 to 55PROTECTOR 2-49 to 50QUICK DISCONNECT 1-8SAFETY GOGGLES 2-54SCREW 2-129STORAGE 2-52 to 55TESTING TOOL 1-8UN-VALVED 1-8

CARTRIDGEGREASE 3-21LUBE EQUIPMENT 3-21LUBRICANT SYSTEM 3-21

CASEACCESSORY 1-85ADHESIVE & SEALANT 1-85AMMETER 1-85BENCH 1-85BEVEL GEAR 2-35BLOCK 1-61, 1-85BOX 1-85 to 87CARRYING CASE 1-85, 1-87

COMPRESSOR 1-85CONNECTOR 1-86DIAGNOSTIC 1-85DIE SET 2-33DIVIDER 1-85DIVIDER KIT 1-85FOAM 1-61, 1-85, 1-87FOAM BLOCK 1-85FOAM PAD 1-85FUEL PUMP TOOL 1-85FUEL SETTING 1-85FUEL SYSTEM TOOL 1-85GOVERNOR TOOL 1-85GROUP 1-85HAND TOOL 1-48INSERT 1-61, 1-85, 1-87LINER 1-85MEASURING 1-85MEASURING TOOL 1-85O-RING 1-87O-RING KIT 1-86PACKING 1-85PADDING 1-61, 1-85, 1-87PELICAN 1-87PLASTIC 1-85PLASTIC CASE 1-85, 1-87POWER TRAIN 1-85PROTECTOR 1-87REPAIR PART 1-61, 1-85REPLACEMENT 1-87SERVICE PART 1-85STEERING CLUTCH 2-35STORAGE 1-61, 1-85 to 87STORE CABINET 1-85SURE SEAL 1-86TAP 2-35TESTER 1-85TIMING 1-85TOOL GROUP 1-85TORQUE CONTROL TOOL 1-85TRANSMISSION 1-85UNIT INJECTOR TOOL 1-85VIBRATION 1-87WIRING TESTER 1-85

CENTERINGBOLT 2-129STEERING 1-61, 2-129TEST GROUP 1-61, 2-129TOOL 1-61, 2-129TRAVEL MOTOR D&A TOOLS 1-61, 2-129WASHER 1-61, 2-129

CHAIN WRENCHCHAIN 1-40CYLINDER 1-40DIFFERENTIAL 1-40HAND TOOL 1-39HANDLE 1-40HOSE ASSEMBLY TOOL 1-39HYDRAULIC 1-40HYDRAULIC CYLINDER 1-40LOCKNUT 1-40PIN 1-40PINION 1-40SERVICEMAN’S HAND TOOL 1-39THREADED 1-40TOOL SET 1-39WRENCH 1-39 to 40

CHECK VALVEFLEXIBLE 1-3, 1-54PICK-UP 1-3, 1-54REMOVER 1-3, 1-54

CHEMICALADDITIVE 3-35ADHESIVE 3-7 to 8, 3-21, 3-31ADHESIVE & SEALANT 3-1, 3-3 to 4ALKALINE 3-10ANAEROBIC 3-1, 3-3 to 4ANTI-FREEZE 3-35ANTI-GALLING 3-27ANTI-SEIZE 3-27BEARING MOUNT 3-1, 3-3

BLOCK 3-2CALIBRATION FLUID 3-33CAULKING 3-7 to 8CLEANING 2-101, 3-10 to 11COMPOUND 3-31COOLANT CONDITIONER 3-13CUTTING OIL 3-30DEFOAMER 3-10DETERGENT 3-11DIESEL FUEL 3-33, 3-35ENGINE REPAIR 3-2 to 3ENGINE TOOL 3-1, 3-3ETHER CYLINDER 3-34FORM-IN-PLACE GASKET 3-6FUEL 3-33, 3-35FUEL INJECTOR 3-33GASKET 3-6HIGH TEMP 3-4HOSE 3-25, 3-35HYDROSOLV CLEANER 3-10INJECTION 3-33INJECTOR 3-33LAPPING 3-31LAPPING COMPOUND 3-31LOCTITE 3-1, 3-3LUBRICANT 3-7 to 9, 3-21, 3-30 to 31MOLY 3-27MOLY KOTE 3-27MOLYBDENUM DISULFIDE 3-27PAINT 3-8PASTE 3-37PERSONAL USE 2-88, 2-102 to 103PNEUMATIC 3-25, 3-35PNEUMATIC TOOL 3-25, 3-35PRESSURE WASHER 3-10 to 11PRIMER 3-8PROTECTION 2-88, 2-102 to 103RETAINING COMPOUND 3-1, 3-3 to 4SEAL 3-9SEALANT 3-6SOAP 3-11TAPE 3-2TEST KIT 3-13THREAD LOCKING 3-1, 3-3 to 4WICKING SEALANT 3-4

CHISELDIFFERENTIAL 1-53HAND TOOL 1-2 to 3, 1-48, 1-53PIN REMOVER 1-48PNEUMATIC TOOL 1-72SERVICEMAN’S HAND TOOL 1-2 to 3, 1-53TIP 1-48TOOL SET 1-2 to 3, 1-53WELDING 1-72

CIRCUITELECTRICAL 1-76GROUND FAULT 1-76INTERRUPTER 1-76SUPPLY 1-76

CLAMPBATTERY 2-61 to 62BATTERY STARTING SYS 2-61 to 62BOLT 2-129BOOSTER CABLE BATTERY 2-61 to 62C-TYPE 2-58CYLINDER 2-129ENGINE 2-129ENGINE TOOL 2-129HOSE 2-129HYDRAULIC CYLINDER 2-129

CLEANINGABRASIVE 2-19ABSORBENT 2-104 to 107AEROSOL 3-26AIR POWERED 1-73 to 74ALKALINE 3-8, 3-10, 3-25ALUMINUM SAFE 3-10BATTERY 3-26CABINET WASHER 3-10CHARGING HOSE 3-10CHEMICAL 2-101, 3-10 to 11

CONCENTRATE 3-10COOLING SYSTEM 3-13DEFOAMER 3-10DEGREASER 3-10 to 11, 3-25 to 26DETERGENT 3-8 to 11, 3-25DISC 2-9DISPENSER 2-106 to 107ELECTRICAL 3-25EXTENSION 1-74FILTER KIT 3-9GLASS 3-9GRINDING 2-19GRIT HAND CLEANER 3-35GUN 1-73 to 74HAND CLEANER 3-35 to 36HIGH FLASH 3-25HOLDER 2-9HYDROSOLV CLEANER 3-10IDLER 2-9LINK 2-9LUBRICANT 3-26MAINTENANCE AIDS 2-106 to 107,

3-25 to 26MANDREL 2-9MARINE ENGINE 3-9MINERAL SPIRIT 3-25OIL 3-9, 3-26ORANGE HAND CLEANER 3-35PAPER PRODUCT 2-107PAPER TOWEL 2-107PENETRATE OIL 3-26PERSONAL USE 3-11, 3-36 to 37PLASTIC 3-9PLASTIC COVER 3-9PNEUMATIC 1-73 to 74PNEUMATIC TOOL 1-73 to 74PRESSURE WASHER 3-10 to 11PROTECTIVE 3-9, 3-26PUMICE HAND CLEANER 3-35RUST PROTECTION 3-8, 3-25SAFETY 2-106 to 108SEAL KIT 3-9SOAP 3-9 to 11, 3-25, 3-37SOLVENT 3-25 to 26SPRAYER 3-26SURFACE RECONDITIONING 2-9, 2-19UNDERCARRIAGE 2-9VACUUM 1-74WASHER 3-25WATERLESS HAND CLEANER 3-35WHEEL 2-19WINDOW 3-8WIPES 2-104 to 105, 2-107

CLUTCHASSEMBLY 3-28CIRCULAR CUT-OFF SAW 3-28FAN 3-28FAN DRIVE 3-28SILICONE 3-28

COATPERSONAL USE 2-111

COILADJUSTMENT 2-122STRAP 2-122

COLLETBOLT EXTRACTOR 2-46BOLT REMOVER 2-46EXTRACTOR 2-46HOUSING 2-46 to 47MINI CUTTING TORCH 2-48STUD REMOVER 2-46 to 47WASHER 2-46

COMPOUNDADHESIVE 3-31AEROSOL 3-40ASSEMBLY 3-31CHEMICAL 3-31DISPENSER KIT 3-31HEAT SINK 3-27HEAT SINK COMPOUND 3-27

CABINET cont. CASE cont. CHEMICAL cont. CLEANING cont.


Nomenclature Index


HEAT TRANSFER 3-27LAPPING 3-31LAPPING COMPOUND 3-31LUBRICANT 3-31O-RING 3-31PAINT REMOVER 3-40REPAIR KIT 3-1, 3-3RUBBER 3-31SEALANT 3-1, 3-3SEMI-CONDUCTOR 3-27SILICONE 3-27

COMPRESSORAIR CONDITIONING 3-29AIR TOOL OIL 3-29BLOCK 1-85CASE 1-85GROUP 1-85PUMP OIL 3-29REFRIGERANT 3-29VACUUM PUMP 3-29

CONNECTORBOX 1-86CASE 1-86ELECTRICAL 2-75, 2-77PLUG 2-75SHRINK TUBING 2-77STORAGE 1-86SUPPLY 2-75SURE SEAL 1-86

CONTAINERBARREL 2-115COVER 2-115DRUM COVER 2-115DRUM CRADLE 2-115DRUM FILTER 2-115DRUM HANDLER 2-115DRUM TILTER 2-115FLAMMABLE 2-115FUNNEL 2-115SAFETY CAN 2-115SOLVENT CAN 2-115STORAGE CAN 2-115TOOL BOX 1-84WATER RESISTANT 1-84

COUPLERCOUPLING 1-56GREASE GUN 1-56LUBE EQUIPMENT 1-56LUBRICATION 1-56NIPPLE 1-56NOZZLE ASSEMBLY 1-56REPAIR PART 1-56TORQUE 1-61WRENCH 1-61ZERK ADAPTER 1-56

COUPLINGASSEMBLY 1-8COUPLER 1-56DIFFERENTIAL 1-8GAUGE GROUP 1-8GREASE GUN 1-56HOSE ASSEMBLY TOOL 1-56HYDROSTAT 1-8LUBE EQUIPMENT 1-56LUBRICATION 1-56NIPPLE 1-56NOZZLE ASSEMBLY 1-56ORIFICE 2-35PIPE 2-35PLUG 2-35PRESSURE 1-8REPAIR PART 1-56REWORK 2-35TAP 2-35TAPER 2-35TESTING 1-8ZERK ADAPTER 1-56

COVERBARREL 2-115

BOX 1-83CABINET 1-80CONTAINER 2-115DRUM COVER 2-115HYDRAULIC 2-50PLEXIGLASS 1-83POWER TRAIN 1-83REPAIR BOX 1-83STORAGE 1-80TEST GROUP 2-50TESTING 2-50TOOL BOX 1-80TRANSMISSION 1-83VEHICLE SYSTEM TOOLS 2-50WAREHOUSE EQUIPMENT 1-83

COVER-ALLSTYVEK COVERALLS 2-91

CRACK REPAIRSALVAGE 1-78

CRANKSHAFTABRASIVE 2-24BELT 2-24BRACKET 1-88DAMPER 3-28ENGINE TOOL 1-88, 3-28GEAR 2-40GUIDE 2-40HOIST 1-88HYDRAULIC 2-40LINK 1-88POLISHING 2-24PULLER 2-40REPAIR GROUP 3-28SANDING 2-24SURFACE RECONDITIONING 2-24TUBE 3-28VIBRATION 3-28

CUPHAND TOOL 1-54PAPER PRODUCT 2-108PICK 1-54SEAL 1-54SEAL PICK 1-54SERVICEMAN’S HAND TOOL 1-54

CUTTER BITPNEUMATIC TOOL 1-72

CUTTINGABRASIVE 2-20CUTTING TORCH 2-48HAND TOOL 1-40, 1-51HOLDER 2-9IGNITOR 2-48LIFT CYLINDER 2-9MAST 2-9METAL 2-9MINI CUTTING TORCH 2-48PIPE CUTTER 1-51PNEUMATIC 1-72PNEUMATIC TOOL 1-72POLISHING 2-22RECONDITIONING 2-9ROD 2-48SERVICEMAN’S HAND TOOL 1-51SHIELD 2-48SPACER 1-40STRIKER PLATE 2-48SURFACE RECONDITIONING 2-9, 2-20,

2-22TUBING CUTTER 1-51WHEEL 1-51, 2-20

CUTTING OILCHEMICAL 3-30LUBRICANT 3-30MACHINING OIL 3-30MAINTENANCE AIDS 3-30OIL 3-30PIPE THREADING OIL 3-30

TAP OIL 3-30THREADING OIL 3-30

CYLINDERADAPTER 1-22 to 23BOLT 2-128 to 129BRAKE 1-33BRUSH 2-4CHAIN 1-40CHAIN WRENCH 1-40CLAMP 2-129DIFFERENTIAL 1-40HANDLE 1-40HITCH 1-33HYDRAULIC 1-22 to 23, 1-40, 2-128HYDRAULIC CYLINDER 2-129LOCKNUT 1-40MULTIPLIER 1-22 to 23PIN 1-40PINION 1-40REPAIR 1-22 to 23REPAIR PART 2-128SOCKET 1-33STAND 1-22 to 23SURFACE RECONDITIONING 2-4THREADED 1-40TORQUE 1-22 to 23

DDAMPERCRANKSHAFT 3-28ENGINE TOOL 3-28REPAIR GROUP 3-28TUBE 3-28VIBRATION 3-28

DIAGNOSTICADHESIVE & SEALANT 1-85AMMETER 1-85BATTERY 2-69BLACK LIGHT LEAK DETECTION 3-24BOLT 2-128CARRYING CASE 1-85, 3-24CASE 1-85COOLANT 3-24COOLING SYSTEM 3-24DYE 3-23 to 24ELECTRIC 3-24ELECTRICAL PRODUCT 2-69FILTER 3-24FLASHLIGHT 2-69FLUORESCENT 3-24FUEL PUMP TOOL 1-85FUEL SYSTEM TOOL 1-85INSPECTION 3-23 to 24INSPECTION LIGHT 2-69LEAK DETECTION 3-23 to 24LEATHER JACKET 3-24LIGHT 2-69, 3-24LUBRICANT 3-23 to 24MEASURING 1-85, 2-69OIL 3-23 to 24PERSONAL USE 3-24PLASTIC CASE 1-85RADIANT HEATER 3-24REPAIR PART 1-85SAFETY GLASSES 3-24SERVICE PART 1-85SERVICE TOOL 3-29TACHOMETER 2-128ULTRA-VIOLET CRACK DETECTION 3-23

to 24ULTRA-VIOLET LEAK DETECTION 3-24UNIT INJECTOR TOOL 1-85WATER SOLUBLE OIL 3-24

DIELINKAGE 2-33LOADER 2-33METRIC 2-33 to 34PIPE 2-33STANDARD 2-33 to 34THREAD 2-33

THREAD RESTORATION 2-34THREADED 2-33

DIE SETCASE 2-33

DISCABRASIVE 2-6, 2-10, 2-12 to 14ACCESSORY 1-73ADAPTER 2-16 to 17AIR 1-73CLEANING 2-9ENGINE TOOL 2-8, 2-10 to 11, 2-13FIBER 2-12 to 13GRINDING 1-73, 2-11, 2-13, 2-16 to 17HAND OPERATED 1-73HOLDER 2-7 to 10, 2-16 to 17HOOK AND LOOP 2-15HOSE 1-73IDLER 2-9LIFT CYLINDER 2-9LINK 2-9MANDREL 2-8 to 11, 2-16 to 17, 2-22MAST 2-9METAL 2-9P.S.A. 2-14 to 15PAD 2-7 to 8, 2-10 to 11, 2-13POLISHING 2-13, 2-24POLISHING STAR 2-13, 2-24RECONDITIONING 2-9SANDING 2-15SHAFT 2-8, 2-10 to 11SURFACE RECONDITIONING 1-73,

2-6 to 17, 2-22, 2-24THREADED 2-8, 2-10 to 11UNDERCARRIAGE 2-9WHEEL 2-16 to 17

DISPENSERCLEANING 2-106 to 107MAINTENANCE AIDS 2-106 to 107PACKAGING 2-120PAPER PRODUCT 2-106 to 107PAPER TOWEL 2-106 to 107STRETCH FILM 2-120TAPE 2-119WIPES 2-106 to 107WYPALLS 2-106 to 107

DISPLAYAIR 1-73HAND TOOL 1-43HOSE 1-73SERVICEMAN’S HAND TOOL 1-43SHOP 1-73TOOL SET 1-43

DIVIDERCASE 1-85DIVIDER KIT 1-85STORAGE 1-85

DRILLACCESSORY 2-21, 2-30AIR 1-71AIR REGULATED 2-30AIRCRAFT DRILL 2-30BIT 2-28 to 30, 2-38 to 39, 2-41 to 42, 2-46CHARGER 1-75 to 76CHUCK 1-71COBALT DRILL 2-29CORDLESS 1-75 to 76DRILL SET 2-29DRILL SHARPENING 2-21ELECTRIC 1-75 to 76ENGINE TOOL 2-28EXTENSION 2-30EXTRA HEAVY DUTY 1-76, 2-29GRINDING 2-21, 2-25GUIDE 2-40HAND OPERATED 1-46HAND TOOL 1-46IMPACT 1-75 to 76METRIC 2-30, 2-41 to 42MOBILE 1-76

COMPOUND cont. COVER cont. CUTTING OIL cont. DIE cont.



Nomenclature Index

PNEUMATIC 1-71REDUCED SHANK 2-28, 2-30,

2-38 to 39, 2-41 to 42STANDARD 2-28 to 29, 2-38 to 39SURFACE RECONDITIONING 2-21, 2-25THREAD REPAIR 2-38THREADED 2-38VALVE SEAT 2-25VARIABLE SPEED DRILL 1-75WHEEL 2-21, 2-25

DUST CAPDRUM COVER 2-108PROTECTIVE 2-108

EELECTRICBLACK LIGHT LEAK DETECTION 3-24CARRYING CASE 3-24CORDLESS 1-75DIAGNOSTIC 3-24DRILL 1-75 to 76EXTRA HEAVY DUTY 1-76FILTER 3-24FLUORESCENT 3-24FUSE 2-129LIGHT 2-70, 3-24TESTER 1-61TORQUE 1-61ULTRA-VIOLET LEAK DETECTION 3-24WRENCH 1-61

ELECTRIC POWER TOOLGRINDING 1-75HAND TOOL 1-75

ELECTRICALCABLE 2-124, 2-129CIRCUIT 1-76CLEANING 3-25CONNECTOR 2-75, 2-77ELECTRICAL TAPE 2-118EXTENSION CORD 2-74FASTENER 2-124, 2-129GROUND FAULT 1-76HEAT GUN 2-77HEAT SHRINK 2-76 to 77HYDRAULIC 1-65INSULATOR 2-77INTERRUPTER 1-76MAINTENANCE AIDS 3-25PLUG 2-75PUMP 1-65SHRINK TUBING 2-76 to 77SUPPLY 1-76, 2-75TAPE 2-76, 2-118TAPE DISPENSER 2-76TIE 2-124, 2-129WRENCH 1-65

ELECTRICAL PRODUCTADAPTER 2-110BATTERY 2-68 to 69BULB 2-110CARRYING CASE 2-110DIAGNOSTIC 2-69ELECTRIC LIGHT 2-72 to 73ELECTRIC POWERED 2-72 to 73FLASHLIGHT 1-3, 2-67 to 69HOLSTER 2-67INSPECTION LIGHT 2-68 to 69LAMP 2-110LIGHT 1-3, 2-67 to 69MEASURING 2-69MICROFILM VIEW 2-110PERSONAL USE 1-3, 2-67 to 69SAFETY 1-3, 2-67 to 69TORCH 1-3, 2-67TRANSFORMER 2-110

ELECTRONICADHESIVE & SEALANT 3-7CAULKING 3-7

FORM-IN-PLACE GASKET 3-7GASKET MATERIAL 3-7MOUNTING BRACKET 1-61R.T.V. 3-7SILICONE 3-7TESTER 1-61TORQUE 1-61WRENCH 1-61

ELEMENTATOMIC ABSORPTION 3-33CONOSTAN OIL STANDARD 3-33METAL 3-33OIL 3-33S.O.S. 3-33STANDARD 3-33

EMERGENCY RESPONSE KITABSORBENT 2-102 to 103

ENGINEANTI-SEIZE 3-27BIT 1-15BOLT 1-61, 2-129CLAMP 2-129COLD WEATHER STARTING 3-15ENGINE TOOL 1-15, 1-23, 2-40,

2-50, 2-110, 2-129EYE LOUPE 2-110FLOW METER 2-129GRAPHITE GREASE 3-27HAND TOOL 1-23HELI-COIL 2-40HIGH LOAD GREASE 3-27HIGH TORQUE 3-27INSERT 2-40LOCKWASHER 2-129LOUPE 2-110LUBRICANT 3-14 to 15MAGNIFYING GLASS 2-110METAL CUTTING THREAD INSERT 2-40OIL 3-14 to 15PERSONAL USE 2-110PIN 2-129PLUG 2-50RATCHET 1-23SAFETY 2-110SERVICEMAN’S HAND TOOL 1-23SLEEVE ASSEMBLY 2-40THREAD LUBRICANT 3-27TILT FRAME 1-61TOOL SET 1-23UNDERCARRIAGE 2-129VEHICLE SYSTEM TOOLS 2-129WINDER 2-40

EPOXYADHESIVE 3-34ADHESIVE & SEALANT 3-5BONDING 3-5, 3-34COOLING SYSTEM 3-34FUEL TANK REPAIR KIT 3-34KIT 3-34MIXER CUP 3-5NYLON 3-34PAINT 3-40PAINT PRODUCTS 3-40PRIMER 3-40RADIATOR 3-34REPAIR 3-34REPAIR KIT 3-34SEALANT 3-34SOLVENT 3-40THINNER 3-40URETHANE 3-40

ETHER CYLINDERCHEMICAL 3-34COLD WEATHER STARTING 3-34STARTING 3-34STARTING AIDS 3-34STARTING ETHER 3-34

EXHAUSTEXHAUST MANIFOLD 3-34HI-TEMP SEALANT 3-34MANIFOLD 3-34SEALANT 3-34

EXTENSIONACCESSORY 2-30BOX WRENCH 1-2 to 3, 1-51, 1-59CAMSHAFT 1-59CLEANING 1-74DRILL 2-30DUAL WHEEL 1-8, 1-21, 1-62ENGINE STARTING 1-22ENGINE TOOL 1-1 to 2, 1-10, 1-21GUN 1-74HAND TOOL 1-1 to 2, 1-10, 1-15, 1-21 to 23POWER TRAIN TOOL 1-8, 1-21, 1-62SERVICEMAN’S HAND TOOL 1-21SOCKET 1-1 to 2, 1-10, 1-21SOCKET EXTENSION 1-15, 1-21 to 23STARTER 1-22STARTING SYSTEM 1-22TOOL 1-21TOOL SET 1-21TORQUE 1-2 to 3, 1-8, 1-21, 1-51,

1-59, 1-62UNIVERSAL 1-22VACUUM 1-74WHEEL & TIRE 1-8, 1-21, 1-62WRENCH 1-2 to 3, 1-8, 1-21, 1-51,

1-59, 1-62

EXTRACTORBOLT EXTRACTOR 2-46BOLT REMOVER 2-46 to 47COLLET 2-46HOUSING 2-46KIT 2-46METAL CUTTING THREAD INSERT 2-46PLASTIC CASE 2-46STUD REMOVER 2-46 to 47WASHER 2-46

FFANCLUTCH 3-28FAN DRIVE 3-28

FASTENERADHESIVE & SEALANT 3-1, 3-3ANAEROBIC 3-1, 3-3BEARING MOUNT 3-1, 3-3CABLE 2-124, 2-129ELECTRICAL 2-124, 2-129LIP SEAL 3-1, 3-3LOCTITE 3-1, 3-3REPAIR PART 2-43SEAL 2-123THREAD LOCKING 3-1, 3-3TIE 2-124, 2-129

FILTERBLACK LIGHT LEAK DETECTION 3-24CUTTING TOOL 1-40CUTTING WHEEL 1-40DIAGNOSTIC 3-24ELECTRIC 3-24FLUORESCENT 3-24FUEL SYSTEM TOOL 1-40HAND TOOL 1-40LIGHT 3-24LUBE SYSTEM TOOL 1-40LUBRICANT 1-8, 1-40MAINTENANCE TOOL 1-40PERSONAL USE 2-81PIN 1-40REPLACEMENT 2-81RESPIRATOR 2-81 to 82RETAINING 1-40RINGS 1-40ROLLER 1-40S.O.S. 1-8, 1-40

SAFETY 2-81 to 82SPRING 1-40STRAP WRENCH 1-40ULTRA-VIOLET LEAK DETECTION 3-24WRENCH 1-40

FIRST AIDBLANKET 2-79FIRST AID BLANKET 2-79KIT 2-78PERSONAL USE 2-79SAFETY 2-79WELDING PROTECTION 2-79

FITTINGHYDRAULIC 2-49TEE 2-49TESTING 2-49

FIXTUREREPAIR 2-58TRACK LINK 2-128WELDING 2-128

FLASHLIGHTBATTERY 2-67 to 69BULB 2-67 to 68CLAMP KIT 2-67CONTINUITY TESTER 2-68DIAGNOSTIC 2-69ELECTRICAL PRODUCT 1-3, 2-67 to 69HOLSTER 2-67INSPECTION 2-68INSPECTION LIGHT 2-68 to 69LAMP 2-67 to 68LIGHT 1-3, 2-67 to 69LIGHTING 2-67 to 68MEASURING 2-69PERSONAL USE 1-3, 2-67 to 69SAFETY 1-3, 2-67 to 69TESTER 2-68TORCH 1-3, 2-67 to 68

FLOOR MATABRASIVE COATED MAT 2-109ACCESSORY 2-110ANTI-FATIGUE MAT 2-108 to 109FLOOR PAD 2-108 to 109INTERLOCKING MAT 2-109PERSONAL USE 2-108 to 109SAFETY 2-108 to 109SHOP 2-110

FLUIDAUTO BRAKE FLUID 3-33AUTOMATIC 3-32BRAKE 3-33FAN DRIVE 3-28HI TEMP BRAKE FLUID 3-33HIGH TEMP 3-31LUBRICANT 3-28, 3-31MAINTENANCE AIDS 3-33MOISTURE RESIS BRAKE FLUID 3-33OIL 3-31SHOP FLUID 3-33SILICONE 3-28TRANSMISSION 3-32VISCOUS CLUTCH FLUID 3-28WASHER 3-9WINDSHIELD 3-9

FLUORESCENT LIGHTBALLAST 2-72BULB 2-71CHOP SAW 2-72CLAMP KIT 2-71ELECTRIC LIGHT 2-71 to 72FLUORESCENT 2-71 to 72LAMP 2-71LIGHT 2-71 to 72PORTABLE LIGHT 2-71 to 72TUBE 2-71 to 72VAPOR CLAMP KIT 2-71WORK LIGHT 2-71 to 72

DRILL cont. ELECTRONIC cont. FILTER cont.


Nomenclature Index


FLYWHEELADAPTER 1-39ENGINE TOOL 1-1, 1-4, 1-14, 1-18REPAIR PART 1-39RETAINING 1-1, 1-4, 1-14, 1-18SOCKET 1-1, 1-4, 1-14, 1-18

FOAMBLOCK 1-61, 1-85BOX 1-85, 1-87CASE 1-61, 1-85, 1-87HYDROSTAT 1-85INSERT 1-61, 1-85, 1-87LINER 1-85PACKING 1-85PADDING 1-61, 1-85, 1-87POWER TRAIN TOOL 1-85PROTECTOR 1-87REPAIR PART 1-61, 1-85REPLACEMENT 1-87STORAGE 1-61, 1-85, 1-87WHEEL & TIRE 1-85

FUSEELECTRIC 2-129REPLACEMENT 2-129

GGASKET MATERIALADHESIVE 3-6ADHESIVE & SEALANT 3-7, 3-27BONDING 3-7CAULKING 3-7ELECTRONIC 3-7FLEXIBLE 3-6FLEXIBLE GASKET 3-7FORM-IN-PLACE GASKET 3-7, 3-27HEAT SINK COMPOUND 3-7, 3-27HIGH TEMP 3-7LIQUID GASKET 3-6R.T.V. 3-7, 3-27SEALANT 3-6SILICONE 3-7, 3-27THERMALLY CONDUCTING RTV 3-7, 3-27

GAUGECROWFOOT 1-12DIFFERENTIAL 1-8FEELER GAUGE 1-2 to 7, 1-9, 1-53GAP GAUGE 1-2 to 7, 1-9, 1-53GAUGE GROUP 1-8GROMMET 1-61HAND TOOL 1-4 to 8, 1-50HEAT GUN 2-123HYDRAULIC 2-49HYDROSTAT 1-8INDICATOR 1-12MEASURING TOOL 1-4 to 8PLUG 2-49POWER TRAIN TOOL 1-4 to 8PRESS 2-49PRESSURE 1-8, 2-123PRESSURE GAUGE 1-8PROTECTION 1-61SERVICEMAN’S HAND TOOL 1-4 to 8SHRINK WRAP 2-123SPARK PLUG GAP 1-2 to 7, 1-9, 1-53TESTING 1-8TIRE GAUGE 1-4 to 8TORQUE 1-61WHEEL & TIRE 1-4 to 8WRENCH 1-12, 1-61

GAUGE GROUPASSEMBLY 1-8BOLT 2-128COUPLING 1-8DIFFERENTIAL 1-8GAUGE 1-8HYDROSTAT 1-8, 2-128MEASURING TOOL 1-8PRESSURE 1-8, 2-128PUMP 2-128

REPAIR PART 2-128TESTING 1-8, 2-128

GEARCRANKSHAFT 2-40GUIDE 2-40HYDRAULIC 2-40LUBRICANT 3-19 to 20OIL 3-19 to 20PULLER 2-40

GLASSESEYE GUARD 1-3, 2-85, 2-87EYE PROTECTION 1-3, 2-85, 2-87PROTECTION 2-81SAFETY 1-3, 2-85, 2-87SAFETY GLASSES 1-3, 2-85 to 87

GLOVESBEAD BLAST EQUIPMENT 2-96CHEMICAL RESISTNT GLOVE 2-95 to 96,

2-102 to 103LEATHER 2-95, 2-102 to 103MAINTENANCE AIDS 2-96PERSONAL USE 2-93 to 96, 2-102 to 103PROTECTION 2-92 to 96, 2-102 to 103SAFETY 2-93 to 96, 2-102 to 103

GOVERNORADJUSTABLE 1-15LUBE 3-32METER 1-15OIL 3-32SOCKET 1-15

GREASECARTRIDGE 3-21CHASSIS GREASE 3-21GENERAL PUR LITHIUM 3-21GENERAL PURPOSE GREASE 3-21HIGH LOAD GREASE 3-21LITHIUM BASED GREASE 3-21LUBE EQUIPMENT 3-21LUBRICANT 3-21 to 22, 3-30LUBRICANT SYSTEM 3-21LUBRICATION 3-21MOLY GREASE 3-21MOLYBDENUM DISULFIDE 3-21MOUNTING 3-30MOUNTING KIT 3-30MOUNTING TIRE 3-30REBUILDING 3-28SEALANT 3-28SILICONE 3-28TIRE 3-30TURBO CHARGER 3-28VACUUM 3-28

GREASE GUNBATTERY 1-57COUPLER 1-56COUPLING 1-56GUN 1-4 to 9, 1-56HOSE ASSEMBLY TOOL 1-56LEVER GUN 1-4 to 9, 1-56LUBE EQUIPMENT 1-4 to 9, 1-56LUBE GUN 1-4 to 9, 1-56LUBRICATION 1-56 to 57NIPPLE 1-56NOZZLE ASSEMBLY 1-56REPAIR PART 1-56ZERK ADAPTER 1-56

GUARDHEAT GUN 2-123SHRINK WRAP 2-123

GUIDECRANKSHAFT 2-40DRILL 2-40GEAR 2-40HELI-COIL 2-40HYDRAULIC 2-40INSERT 2-40

PULLER 2-40TAP 2-40

GUNADHESIVE & SEALANT 3-7AIR POWERED 1-73 to 74, 3-7CABLE TIE 2-124CAULKING 3-7CLEANING 1-73 to 74COLLECTOR 1-74EXTENSION 1-74GREASE GUN 1-4 to 9, 1-56LEVER GUN 1-4 to 9, 1-56LUBE EQUIPMENT 1-4 to 9, 1-56LUBE GUN 1-4 to 9, 1-56PNEUMATIC 1-73 to 74PNEUMATIC TOOL 1-73 to 74TIGHTENER 2-124VACUUM 1-74

HHAMMERBALL PEEN HAMMER 1-2 to 3, 1-6,

1-8 to 9, 1-46HAND TOOL 1-2 to 3, 1-6, 1-8 to 9, 1-46PNEUMATIC 1-71 to 72PNEUMATIC TOOL 1-71 to 72SERVICEMAN’S HAND TOOL 1-2 to 3,

1-6, 1-8 to 9, 1-46SOFT FACE HAMMER 1-2 to 3, 1-46TIP 1-3, 1-46TOOL SET 1-2 to 3, 1-8, 1-46

HAND TOOLACCESSORY 1-64ADAPTABLE CABLE 1-22ADAPTER 1-1 to 2, 1-5 to 6, 1-9, 1-12,

1-15, 1-22, 1-48, 1-54, 2-18ADAPTER FITTING 1-22ADJUSTMENT 1-9, 1-36ALLEN WRENCH 1-3, 1-6, 1-8 to 9,

1-42 to 43BALL PEEN HAMMER 1-2 to 3, 1-6,

1-8 to 9, 1-46BAR 1-6, 1-9BASE 1-85BEARING 1-48BIT 1-8 to 9, 1-15, 1-45BLADE 1-3, 1-45, 1-54, 1-76BLOCK 1-50BOLT 1-39BOLT EXTRACTOR 2-44 to 45BOLT REMOVER 2-44 to 45BOX 1-83, 2-47BOX WRENCH 1-39, 1-59BRAKE 1-36BREAKER BAR 1-1, 1-7, 1-14,

1-20 to 21, 1-54BRUSH 1-55 to 56BUSHING 1-48CABINET 1-82 to 83CASE 1-48CENTER PUNCH 1-2 to 3, 1-53CHAIN 1-8CHAIN WRENCH 1-39CHISEL 1-2 to 3, 1-48, 1-53COMBINATION WRENCH 1-1, 1-3, 1-6,

1-8 to 9, 1-23 to 24, 1-35, 1-39, 1-41CROWFOOT 1-12CUP 1-54CUTTING 1-40, 1-51CUTTING TOOL 1-40CUTTING WHEEL 1-40CYLINDER HEAD TOOL 1-2, 1-17DIFFERENTIAL 1-43DISPLAY 1-43DRAWER LINER 1-83DRESSING TOOL 1-19, 1-34DRILL 1-46DRIVE 1-19, 1-22 to 23DRIVER 1-1 to 6, 1-8 to 10, 1-12,

1-14 to 15, 1-17, 1-20 to 22,1-31, 1-47 to 48

ELECTRIC POWER TOOL 1-75ENGINE 1-23ENGINE TOOL 1-1 to 6, 1-8 to 10,

1-12 to 14, 1-17, 1-20 to 23EXTENSION 1-1 to 2, 1-10,

1-15, 1-21 to 23EXTENSION NOZZLE 1-2, 1-9, 1-21, 1-34F.T. 1-1, 1-5, 1-22, 1-54FEELER GAUGE 1-53FIELD USE 1-5, 1-7 to 8FILTER 1-40FINAL DRIVE 1-22FLEXOMETER 1-3, 1-49 to 50FOAM PAD 1-83FORK 1-48FRAME & HITCH TOOL 1-19, 1-39FUEL LINE 1-36FUEL PUMP TOOL 1-36FUEL SYSTEM TOOL 1-36GAP GAUGE 1-53GAUGE 1-4 to 8, 1-50GLOW PLUG 1-2, 1-17GRINDING 1-75GROUP 1-7HACKSAW 1-3, 1-45, 1-76HAMMER 1-2 to 3, 1-6, 1-8 to 9, 1-46HAND OPERATED 1-46HANDLE 1-1 to 2, 1-4 to 5, 1-7, 1-10, 1-15,

1-21 to 22, 1-38 to 39, 1-54HEX BIT SET 1-3, 1-8, 1-15, 1-31, 1-42HEX KEY WRENCH 1-6, 1-9, 1-43HOSE ASSEMBLY 1-8HOSE ASSEMBLY TOOL 1-39HOUSING 2-47HYDRAULIC 1-64 to 65IMPACT 1-66 to 68IMPACT SOCKET 1-5 to 8, 1-13 to 14,

1-18 to 19, 1-29 to 30,1-33 to 34, 1-66 to 68

IMPACT TOOL 1-6 to 7, 1-19,1-29, 1-33 to 34

INSTALLATION TOOL 1-44JAW 1-39KIT 1-20KNIFE 1-54LIFTING 1-8LOCK 1-83MAGNETIC 1-54MAINTENANCE TOOL 1-9MEASURING 1-3, 1-49 to 50MEASURING RULE 1-3, 1-5 to 6,

1-49 to 51MEASURING TAPE 1-3, 1-49 to 50MEASURING TOOL 1-4 to 8METRIC 1-8, 1-15, 1-30 to 31, 1-33,

1-36, 1-43METRIC SOCKET 1-3, 1-6 to 8, 1-19, 1-26,

1-29 to 31, 1-33 to 36, 1-42NYLON 1-48OFFSET WRENCH 1-36OPEN END WRENCH 1-12, 1-25, 1-36, 1-41PADDING 1-83PERSONAL USE 1-49, 2-71PICK 1-54PIN 1-40, 1-47 to 48PIN INSERTER 1-48PIN REMOVER 1-47 to 48PIN SOCKET 1-20PINION 1-43PIPE CUTTER 1-51PIPE WRENCH 1-50 to 51PISTON 1-53PLASTIC HANDLE SCREWDRIVER 1-2,

1-45PLIERS 1-2 to 5, 1-8, 1-51 to 52, 1-58PNEUMATIC TOOL 1-71POPPER VALVES 1-53POWER TRAIN TOOL 1-4 to 8, 1-22, 1-43PRY BAR 1-1, 1-7, 1-14, 1-21PULLER 1-2, 1-9, 1-21, 1-34PUMP 1-65PUNCH 1-2 to 3, 1-52 to 53RACE 1-48RATCHET 1-4 to 5, 1-8, 1-14 to 15,

1-20 to 21, 1-23, 1-34, 1-38, 1-58

GAUGE GROUP cont. GUIDE cont. HAND TOOL cont.



Nomenclature Index

RAZOR KNIFE 1-54REACTION 1-62REMOVAL TOOL 2-47REPAIR 1-14, 1-20 to 21, 1-66 to 68REPAIR KIT 1-14 to 15, 1-20 to 21, 1-58REPAIR PART 1-12, 1-20, 1-83REPLACEMENT 1-22, 1-54RETAINER 1-21, 1-71RETAINING 1-52RETAINING RING 1-52RETAINING RING PLIERS 1-52REVERSING 1-14, 1-20 to 21RIVET 1-53ROLLER 1-40RULE 1-5 to 6, 1-51RULER 1-5 to 6, 1-51SABER 1-45, 1-76SAW 1-3, 1-45, 1-76SCRATCHER BRUSH 1-55 to 56SCREW 2-44 to 45SCREW EXTRACTOR 2-44 to 45SCREWDRIVER 1-2 to 9, 1-44 to 45SEAL 1-3, 1-54SEAL PICK 1-54SEPARATOR 1-48SERVICE TOOL 1-5, 1-7 to 8SERVICEMAN’S HAND TOOL 1-1 to 15,

1-17 to 25, 1-29, 1-31,1-33 to 36, 1-38 to 39, 1-41,1-43 to 46, 1-49 to 56, 1-76,

1-82 to 83, 2-44 to 45SHAFT NUT 1-43SNAP RING PLIERS 1-52SOCKET 1-1 to 23, 1-26 to 34, 1-43 to 44,

1-54, 1-66 to 68, 1-80SOCKET EXTENSION 1-3 to 4, 1-6, 1-9,

1-12, 1-15, 1-21 to 23, 1-34, 1-62SOCKET WRENCH 1-16, 1-33, 1-43, 1-62SPACER 1-40SPANNER WRENCH 1-8, 1-41SPARK PLUG GAP 1-53SPARK PLUG SOCKET 1-44SPECIALTY 1-43SPRING 1-36SQUARE DRIVE 1-19STEERING 1-36STORAGE 1-2, 1-8, 1-15, 1-82 to 83STUD REMOVER 2-47SUSPENSION 1-19, 1-39TAPE MEASURE 1-3, 1-49 to 50TELESCOPING MAGNET 1-54THREAD 1-39TILT CYLINDER 1-52TIP 1-3, 1-46, 1-48TIRE 1-48TIRE GAUGE 1-4 to 8TOOL 1-1, 1-5, 1-7, 1-22, 1-26, 1-32,

1-49, 1-54TOOL BAG 1-48TOOL BOX 1-2, 1-6, 1-8 to 9, 1-15,

1-82 to 83TOOL CHEST 1-2, 1-8 to 9, 1-15, 1-82 to 83TOOL GROUP 1-5 to 7, 2-18TOOL SET 1-1 to 15, 1-17 to 25, 1-29, 1-31,

1-33 to 36, 1-38 to 39, 1-41,1-43 to 44, 1-46, 1-52 to 54,

1-83, 2-44 to 45TOOL STORAGE 1-4 to 5TORQUE 1-59TORX 1-3, 1-9, 1-16, 1-43TRANSMISSION 1-17, 1-53TUBING CUTTER 1-51U-JOINT 1-23UNIVERSAL JOINT 1-2, 1-9, 1-17,

1-22, 1-34UTILITY KNIFE 1-54VEHICLE SYSTEM TOOLS 1-22WAREHOUSE EQUIPMENT 1-2, 1-8,

1-15, 1-82 to 83WHEEL & TIRE 1-4 to 8WORK LIGHT 2-71WRENCH 1-1, 1-3 to 15, 1-17 to 25, 1-27,

1-29 to 30, 1-32 to 36, 1-38 to 39,1-41 to 44, 1-50 to 51, 1-54, 1-59,

1-64, 1-66 to 68, 1-80

HANDLEBROOM 2-126CHAIN 1-40CHAIN WRENCH 1-40CYLINDER 1-40FILE 2-27FUEL SYSTEM TOOL 1-2, 1-9, 1-17GLASS 1-54GOVERNOR TOOL 1-2, 1-9, 1-17HAND TOOL 1-1 to 2, 1-4 to 5, 1-7, 1-10,

1-15, 1-21 to 22, 1-38 to 39, 1-54HYDRAULIC 1-40JANITORIAL EQUIPMENT 2-126MOP 2-126RATCHET 1-38RETAINER 1-21SERVICEMAN’S HAND TOOL 1-1 to 2,

1-10, 1-15, 1-21 to 22, 1-38SOCKET 1-1 to 2, 1-4 to 5, 1-7,

1-9 to 10, 1-17, 1-22, 1-54TOOL SET 1-1 to 2, 1-10, 1-15,

1-21 to 22, 1-38TORQUE CONTROL TOOL 1-2, 1-9, 1-17WINDOW 1-54WINDOW INSTALLATION 1-54WINDSHIELD 1-54WRENCH 1-15, 1-21 to 22, 1-38

HARD HATATTACHMENT 2-90BRACKET 2-90HEAD GEAR 2-89HEAD PROTECTION 2-89PERSONAL USE 2-89PROTECTION 2-89SAFETY 2-89

HAZARDOUS ANDFLAMMABLE STORAGEBLOW GUN 1-74SAFETY AIR GUN 1-74

HOSEACCESSORY 1-73AIR 1-73ANTI-FREEZE 3-35CAP 2-52 to 55CHEMICAL 3-25, 3-35CLAMP 2-129DISC 1-73DISPLAY 1-73GRINDING 1-73HAND OPERATED 1-73PLUG 2-52 to 55PNEUMATIC 3-25, 3-35PNEUMATIC TOOL 3-25, 3-35PROTECTION 2-52 to 55SAFETY GOGGLES 2-54SHOP 1-73STORAGE 2-52 to 55SURFACE RECONDITIONING 1-73TORQUE 1-61WRENCH 1-61

HOSE ASSEMBLYHAND TOOL 1-8HYDRAULIC 1-8POWER TRAIN 1-8TEST GROUP 1-8TRANSMISSION 1-8

HYDRAULICACCESSORY 1-64ADAPTER 1-22 to 23ADDITIVE 3-20, 3-32ASSEMBLY 1-16BOLT 2-128 to 129CHAIN 1-40CHAIN WRENCH 1-40COTTER PIN 2-129COVER 2-50CRANKSHAFT 2-40CYLINDER 1-22 to 23, 1-40, 2-128DIFFERENTIAL 1-40DRIVE 1-16

ELECTRICAL 1-65FITTING 2-49GAUGE 2-49GEAR 2-40GUIDE 2-40HAND TOOL 1-64 to 65HANDLE 1-40HOSE ASSEMBLY 1-8LOCKNUT 1-40LOCKWASHER 2-129LUBRICANT 3-19LUBRICATION 2-129METER 2-49MULTIPLIER 1-22 to 23OIL 3-19 to 20, 3-32PIN 1-40PINION 1-40PLUG 2-49POWER TRAIN 1-8PRESS 2-49PULLER 2-40PUMP 1-16, 1-65, 2-49, 2-129REPAIR 1-22 to 23REPAIR KIT 1-63 to 64REPAIR PART 2-49, 2-128 to 129SEAL 2-49SEAL KIT 1-63SOCKET 1-16STAND 1-22 to 23TEE 2-49TEST GROUP 1-8, 2-50, 2-129TESTING 2-49 to 50, 2-128 to 129THREADED 1-40TORQUE 1-22 to 23, 1-63 to 65TRANSMISSION 1-8WRENCH 1-63 to 65

HYDRAULIC CYLINDERADDITIVE 3-32BOLT 2-129CHAIN WRENCH 1-40CLAMP 2-129CYLINDER 2-129LUBRICANT 3-32OIL 3-32SEAL 3-32WRENCH 1-40

HYDRAULIC WRENCHACCESSORY 1-63REACTION ARM 1-63SEAL KIT 1-64SQUARE DRIVE 1-64

HYDROSTATASSEMBLY 1-8BLOCK 1-85BOLT 2-128COUPLING 1-8DIFFERENTIAL 1-8FOAM 1-85GAUGE 1-8GAUGE GROUP 1-8, 2-128HEX KEY WRENCH 1-41MEASURING TOOL 1-8POWER TRAIN TOOL 1-85PRESSURE 1-8, 2-128PUMP 1-41, 2-128REPAIR PART 1-85, 2-128STORAGE 1-85TESTING 1-8, 2-128WHEEL & TIRE 1-85WRENCH 1-41

IIDLERCLEANING 2-9DISC 2-9HOLDER 2-9LINK 2-9MANDREL 2-9ROLLER 1-2 to 3, 1-54RULE 1-3

SCRAPER 1-2 to 3, 1-54SERVICE KIT 1-2 to 3, 1-54SURFACE RECONDITIONING 2-9TRACK 1-2 to 3, 1-54UNDERCARRIAGE 1-2 to 3, 1-54, 2-9

INDICATORBRACKET 2-129CROWFOOT 1-12GAUGE 1-12WRENCH 1-12

INJECTION PUMPSOCKET 1-15WRENCH 1-15

INJECTOR SLEEVEINK 3-23LAYOUT BLUE 3-23LAYOUT INK 3-23TOOLMAKER’S INK 3-23

INSERTACCESSORY 2-56BENCH 1-85BLOCK 1-61, 1-85BOX 1-85CASE 1-61, 1-85, 1-87COARSE 2-37 to 40ENGINE 2-40ENGINE TOOL 2-40FOAM 1-61, 1-85, 1-87GUIDE 2-40HELI-COIL 2-37 to 40, 2-42INSERT GROUP 2-40INSERT KIT 2-42INSTALLATION TOOL 2-37 to 40, 2-43INSTALLER 2-37 to 40JAW INSERT 2-56KIT 2-41 to 42LINER 1-85MASTER 2-41 to 42METAL CUTTING THREAD INSERT 2-40 to 42METRIC 2-38 to 40, 2-43PACKING 1-85PADDING 1-61, 1-85, 1-87PILOT 2-40PIPE VISE 2-56PROTECTOR 1-87REPAIR KIT 2-38, 2-42REPAIR PART 1-61, 1-85REPLACEMENT 1-87, 2-42REPLACEMENT KIT 2-42SLEEVE 2-40SLEEVE ASSEMBLY 2-40SPARK PLUG 2-39 to 40STANDARD 2-38, 2-40STORAGE 1-61, 1-85, 1-87TAP 2-37 to 40THREAD 2-43THREAD REPAIR 2-38THREADED 2-43VISE 2-56WINDER 2-40

INSTALLATION TOOLBOLT 2-129HAND TOOL 1-44HELI-COIL 2-37 to 40INSERT 2-37 to 40, 2-43INSTALLER 2-37 to 40, 2-43MASTER 2-129METRIC 2-39PARTS CLEANER 1-77PIN 2-129REMOVAL TOOL 2-129RIVET 1-53SERVICEMAN’S HAND TOOL 1-44SOCKET 1-44SPARK PLUG SOCKET 1-44THREAD 2-43TOOL 2-43TOOL SET 1-44TRACK 2-129

HAND TOOL cont. HYDRAULIC cont. IDLER cont.


Nomenclature Index


UNDERCARRIAGE 2-129WRENCH 1-44

INSTALLERHELI-COIL 2-37 to 40INSERT 2-37 to 40INSTALLATION TOOL 2-37 to 40, 2-43METRIC 2-39STUD 2-47

JJANITORIAL EQUIPMENTBROOM 2-126BUCKET 2-126HANDLE 2-126LINER 2-126MOP 2-126PLASTIC 2-127WASTE DISPOSAL 2-127WASTE RECEPTACLE 2-126

KKITCONDITIONER 3-2, 3-13COOLANT 3-13COOLING SYSTEM 3-13CORDLESS 1-75 to 76EPOXY 3-34EXTRACTOR 2-46FIRST AID 2-78FUEL TANK REPAIR KIT 3-34HAND TOOL 1-20HELI-COIL 2-39, 2-42IMPACT 1-75 to 76INSERT 2-41 to 42INSERT KIT 2-39JAW INSERT 2-56MASTER 2-41 to 42METAL CUTTING THREAD INSERT 2-46PLASTIC CASE 2-46RADIATOR 3-13RATCHET 1-15, 1-20 to 21REMOVAL 1-10, 1-27REPAIR KIT 1-15, 1-20 to 21,

2-42, 3-34REPAIR PART 1-15, 1-20 to 21REPLACEMENT 2-42REPLACEMENT KIT 2-42SEALANT 3-34SHOP 2-56SOCKET 1-10, 1-27TEST KIT 3-13TEST STRIP 3-13VISE 2-56WRENCH 1-10, 1-15, 1-20 to 21, 1-27

KNIFEBLADE 1-54HAND TOOL 1-54RAZOR KNIFE 1-54REPLACEMENT 1-54SERVICEMAN’S HAND TOOL 1-54UTILITY KNIFE 1-54WINDOW 3-8

LLADDERSHELF LADDER 2-127STEP 2-127

LAMPBATTERY 2-67 to 68BULB 2-67 to 68, 2-71 to 72, 2-110ELECTRIC LIGHT 2-71 to 72ELECTRICAL PRODUCT 2-110FLASHLIGHT 2-67 to 68FLUORESCENT LIGHT 2-71LIGHT 2-71MICROFILM VIEW 2-110

PORTABLE LIGHT 2-71TRANSFORMER 2-110

LAPPINGADHESIVE 3-31CHEMICAL 3-31COMPOUND 3-31LAPPING COMPOUND 3-31LUBRICANT 3-31

LEVELUNIVERSAL 1-49

LIFTINGACCESSORY 1-8, 1-89ASSEMBLY 1-88BRACKET 1-88CHAIN 1-8FUEL SYSTEM TOOL 1-88FUEL TANK TOOL 1-88HAND TOOL 1-8HOIST 1-88LINK 1-88PLATE 1-89PROTECTIVE 1-89SHACKLE 1-8, 1-89SLEEVE 1-89SLING 1-8, 1-88 to 90TRANSMISSION 1-88

LIGHTINGBATTERY 2-70FLASHLIGHT 2-67 to 68PERSONAL USE 2-67 to 68

LINERBOX 1-85BRACKET 1-88CASE 1-85FOAM 1-85HOIST 1-88INSERT 1-85JANITORIAL EQUIPMENT 2-126LINK 1-88PACKING 1-85PADDING 1-85REPAIR PART 1-85STORAGE 1-85WASTE RECEPTACLE 2-126

LINKBRACKET 1-88CLEANING 2-9CRANKSHAFT 1-88DISC 2-9ENGINE TOOL 1-88FUEL SYSTEM TOOL 1-88FUEL TANK TOOL 1-88HOIST 1-88HOLDER 2-9IDLER 2-9LIFTING 1-88LINER 1-88SURFACE RECONDITIONING 2-9UNDERCARRIAGE 2-9

LIQUID GASKETADHESIVE 3-6FLEXIBLE 3-6GASKET MATERIAL 3-6SEALANT 3-6

LOCKCABINET 1-82HAND TOOL 1-83SERVICEMAN’S HAND TOOL 1-83STORAGE 1-83TOOL BOX 1-82 to 83TOOL CHEST 1-83

LOCKNUTCHAIN WRENCH 1-40CYLINDER 1-40DIFFERENTIAL 1-40HYDRAULIC 1-40

PINION 1-40THREADED 1-40WHEEL BEARING 1-43WRENCH 1-43

LUBRICANTADDITIVE 3-32ADHESIVE 3-7 to 8, 3-21, 3-31AEROSOL 3-26ALUMINUM MACHINE FLUID 3-30 to 31BEADLESS TIRE 3-29BREAK-IN LUBRICANT 3-27CABLE 3-26CAMSHAFT 3-27CAULKING 3-7 to 8CHAIN 3-26CHEMICAL 3-7 to 9, 3-21, 3-30 to 31CLEANING 3-26COLD WEATHER STARTING 3-15COMPOUND 3-31COOLANT 3-24COOLING SYSTEM 3-24CRANKSHAFT GRINDING FLUID 3-30CUTTING OIL 3-30DEGREASER 3-26DIAGNOSTIC 3-23 to 24DRY FILM LUBRICANT 3-26DYE 3-23 to 24ENGINE 3-14 to 15ENGINE TOOL 3-30EXTREME PRESSURE LUBE 3-27FAN DRIVE 3-28FILM 3-26FILTER 1-8, 1-40FINAL DRIVE 3-18FLUID 3-28, 3-31GAS ENGINE 3-16GEAR 3-19 to 20GENERAL PURPOSE GREASE 3-21GREASE 3-21 to 22, 3-30GRINDING FLUID 3-30 to 31HIGH TEMP 3-31HYDRAULIC 3-19HYDRAULIC CYLINDER 3-32INSPECTION 3-23 to 24LAPPING 3-31LAPPING COMPOUND 3-31LEAK DETECTION 3-23 to 24MACHINING OIL 3-30MAINTENANCE AIDS 3-23MARINE ENGINE 3-28MARINE GEAR 3-28MOUNTING 3-30MOUNTING KIT 3-30MOUNTING TIRE 3-29 to 30NON-AEROSOL 3-26OIL 1-62, 3-14 to 20, 3-23 to 24,

3-26, 3-31 to 32PENETRATE OIL 3-26PIPE THREADING OIL 3-30POWER TRAIN TOOL 3-29RIM LUBRICANT 3-29RUBBER 3-29 to 30RUST PENETRATING 3-26RUST PREVENTIVE 3-26, 3-31S.O.S. 1-8, 1-40SEAL 3-9, 3-32SILICONE 3-28SOLVENT 3-26SPRAYER 3-26STORAGE 3-31TAP OIL 3-30THREADING OIL 3-30TIRE 3-30TRACTOR 3-18TRANSMISSION 1-62, 3-17ULTRA LOW SULFER 3-15ULTRA-VIOLET CRACK DETECTION 3-23 to 24VISCOUS CLUTCH FLUID 3-28WATER DISPLACING 3-31WATER SOLUBLE CUTTING OIL 3-30WATER SOLUBLE OIL 3-24, 3-30 to 31WHEEL & TIRE 3-29

LUBRICATIONBATTERY 1-57BOLT 2-129CHASSIS GREASE 3-21COTTER PIN 2-129COUPLER 1-56COUPLING 1-56GENERAL PUR LITHIUM 3-21GENERAL PURPOSE GREASE 3-21GREASE 3-21GREASE GUN 1-56 to 57HOSE ASSEMBLY TOOL 1-56HYDRAULIC 2-129LEAK DETECTION 3-23LITHIUM BASED GREASE 3-21LUBE EQUIPMENT 1-56, 3-21OIL SOLUBLE DYE-VISIBLE 3-23PUMP 2-129REPAIR PART 1-56, 2-129ZERK ADAPTER 1-56

MMAGNETICHAND TOOL 1-54SERVICEMAN’S HAND TOOL 1-54TELESCOPING MAGNET 1-54

MAIN BEARINGADAPTER 1-59BEARING 1-59MAIN CAP 1-59TOOL 1-59TORQUE 1-59WRENCH 1-59

MANDRELABRASIVE 2-20ADAPTER 2-16 to 17CLEANING 2-9DISC 2-8 to 11, 2-16 to 17, 2-22ENGINE TOOL 2-8, 2-10 to 11GRINDING 2-16 to 17HOLDER 2-9, 2-16 to 17IDLER 2-9LIFT CYLINDER 2-9MAST 2-9POLISHING 2-24POLISHING STAR 2-24RECONDITIONING 2-9SHAFT 2-8, 2-10 to 11SURFACE RECONDITIONING 2-8 to 11,

2-16 to 17, 2-20, 2-22, 2-24THREADED 2-8, 2-10 to 11UNDERCARRIAGE 2-9WHEEL 2-16 to 17

MANIFOLDEXHAUST 3-34EXHAUST MANIFOLD 3-34HI-TEMP SEALANT 3-34SEALANT 3-34

MARINE GEARCLUTCH DRIVE HUB 1-1, 1-7, 1-14, 1-21LUBRICANT 3-28MARINE ENGINE 3-28SILICONE 3-28SOCKET EXTENSION 1-1, 1-7, 1-14, 1-21

MARKERAIR 1-72IDENTIFIER 2-111PACKAGING 2-125PNEUMATIC 1-72PNEUMATIC TOOL 1-72TAPE 2-125

MEASURING TOOLBEARING 1-53CASE 1-85GAUGE 1-4 to 8GAUGE GROUP 1-8HAND TOOL 1-4 to 8

INSTALLATION TOOL cont. LAMP cont. LOCKNUT cont.



Nomenclature Index

HYDROSTAT 1-8MEASURING 1-53O-RING 2-130PLASTIC CASE 1-85POWER TRAIN 1-85POWER TRAIN TOOL 1-4 to 8PRESSURE 1-8PRESSURE GAUGE 1-8REPAIR PART 1-85SERVICEMAN’S HAND TOOL 1-4 to 8STORAGE 1-85TESTING 1-8TIRE GAUGE 1-4 to 8TRANSMISSION 1-85WHEEL & TIRE 1-4 to 8

METALATOMIC ABSORPTION 3-33CONOSTAN OIL STANDARD 3-33CUTTING 2-9DISC 2-9ELEMENT 3-33HOLDER 2-9LIFT CYLINDER 2-9MAST 2-9OIL 3-33RECONDITIONING 2-9S.O.S. 3-33STANDARD 3-33SURFACE RECONDITIONING 2-9

METAL CUTTING THREADINSERTDRILL SET 2-28ENGINE 2-40ENGINE TOOL 2-40EXTRACTOR 2-46HELI-COIL 2-38 to 40INSERT 2-40 to 42INSERT KIT 2-42KIT 2-46MASTER 2-38 to 39METRIC 2-34, 2-38 to 39PLASTIC CASE 2-46REPAIR 2-38 to 39SLEEVE ASSEMBLY 2-40STANDARD 2-28, 2-34TAP 2-35TAP SET 2-32THREAD CHASER 2-34THREAD REPAIR 2-38 to 39

METERADJUSTABLE 1-15GOVERNOR 1-15HYDRAULIC 2-49SEAL 2-49SOCKET 1-15TESTING 2-49

MUD FLAPACCESSORY 2-112MUD GUARD 2-112RAIN FLAP 2-112RAIN GUARD 2-112

NNIPPLECAP 1-8COUPLER 1-56COUPLING 1-56GREASE GUN 1-56LUBE EQUIPMENT 1-56POWER TRAIN 1-8PRESSURE 1-8QUICK DISCONNECT 1-8REPAIR PART 1-56TESTING TOOL 1-8TORQUE 1-61UN-VALVED 1-8WRENCH 1-61ZERK ADAPTER 1-56

NOZZLEADHESIVE 3-5MIXER 3-5SPRAYER 3-26

NOZZLE ASSEMBLYCOUPLER 1-56COUPLING 1-56EXTENSION NOZZLE 1-74FLAMMABLE 1-74GREASE GUN 1-56LUBE EQUIPMENT 1-56REPAIR PART 1-56SAFETY TANK 1-74SPRAY GUN 1-74STORAGE 1-74ZERK ADAPTER 1-56

OO-RING SEALACCESSORY 2-49, 2-112 to 114FLUID EXTRACT TOOL 2-49, 2-112 to 114FLUID SAMPLING 2-49, 2-112 to 114OIL 2-49, 2-112 to 114REPAIR PART 2-49, 2-112 to 114SEAL 1-87, 2-49, 2-112 to 114

OILACCESSORY 2-49, 2-112 to 114ADAPTER 2-49, 2-113ADDITIVE 3-20, 3-32AEROSOL 3-26ATOMIC ABSORPTION 3-33AXLE HOUSING 3-20BOTTLE 2-28CLEANING 3-9, 3-26COLD WEATHER STARTING 3-15CONOSTAN OIL STANDARD 3-33COOLANT 3-24COOLING SYSTEM 3-24CUTTING OIL 3-30DEGREASER 3-26DIAGNOSTIC 3-23 to 24DRILL SET 2-28DYE 3-23 to 24ELEMENT 3-33ENGINE 3-14 to 15FILTER KIT 3-9FINAL DRIVE 3-18FLUID 3-31FLUID EXTRACT TOOL 2-28, 2-49,

2-112 to 114FLUID SAMPLING 2-28, 2-49,

2-112 to 114GAS ENGINE 3-16GEAR 3-19 to 20GOVERNOR 3-32HIGH TEMP 3-31HYDRAULIC 3-19 to 20, 3-32HYDRAULIC CYLINDER 3-32INSPECTION 3-23 to 24LEAK DETECTION 3-23 to 24LUBE 3-32LUBRICANT 1-62, 3-14 to 20,

3-23 to 24, 3-26, 3-31 to 32MAINTENANCE AIDS 3-30MARINE ENGINE 3-9METAL 3-33O-RING SEAL 2-49, 2-112 to 114OIL SOLUBLE DYE-VISIBLE 3-23PENETRATE OIL 3-26PENETRATING 3-25PROTECTIVE 3-29PUMP OIL 3-28REDUCER 2-49, 2-113REFRIGERANT 3-28REPAIR PART 2-49, 2-112 to 114RUST PENETRATING 3-26RUST PREVENTIVE 3-30 to 31S.O.S. 3-33SEAL 2-49, 2-112 to 114, 3-32SOLVENT 3-26SPRAYER 3-26

STABILIZER 3-32STANDARD 2-28, 3-33STORAGE 3-30 to 31TRACTOR 3-18TRANSMISSION 1-62, 3-17ULTRA LOW SULFER 3-15ULTRA-VIOLET CRACK DETECTION 3-23 to 24VACUUM PUMP 3-29VAPOR CORROSION INHIBITING 3-30VISIBLE LIGHT 3-23WATER DISPLACING 3-31WATER SOLUBLE OIL 3-24

OIL PUMPAIR COUPLER 1-62AIR DISCONNECT 1-62AIR MOTOR 1-62GREASE PUMP 1-62LUBE EQUIPMENT 1-62QUICK DISCONNECT 1-62

OPEN END WRENCHADAPTER 1-12HAND TOOL 1-12, 1-25, 1-36, 1-41METRIC SOCKET 1-36REPAIR PART 1-12SERVICEMAN’S HAND TOOL 1-12, 1-25,

1-36, 1-41STEERING 1-36TOOL SET 1-12, 1-25, 1-36, 1-41WRENCH 1-12, 1-25, 1-36, 1-41

PPACKAGINGDISPENSER 2-120FILAMENT 2-117MARKER 2-125MASTER 2-120PAPER 2-124SHIPPING 2-121STORAGE 2-121STRETCH FILM 2-120 to 121TAPE 2-116 to 117, 2-125TRANSPARENT 2-121WHEEL 2-125

PACKINGBLOCK 1-85BOX 1-85CASE 1-85FOAM 1-85FUEL SYSTEM TOOL 1-85GOVERNOR TOOL 1-85INSERT 1-85LINER 1-85REPAIR PART 1-85STORAGE 1-85TESTER 1-85TORQUE CONTROL TOOL 1-85WIRING TESTER 1-85

PADABRASIVE 2-15, 2-22ABSORBENT 1-69BACKING PAD 2-12 to 13BUFFER 1-69DISC 2-7 to 8, 2-10 to 11, 2-13ENGINE TOOL 2-8, 2-10 to 11, 2-13HOLDER 2-8, 2-10SAFETY 1-69SANDER 1-69SANDING 1-69, 2-15, 2-22SURFACE RECONDITIONING 2-7 to 8,

2-10 to 11, 2-13, 2-22

PAINT PRODUCTSAEROSOL 3-25, 3-38ALUMINUM SAFE 3-40DECAL REMOVER 3-40EPOXY 3-40FAST DRY 3-38MUFFLER 3-40

PAINT 3-38 to 40PAINT REMOVER 3-40PAINT STRIPPER 3-40PAINT THINNER 3-39PRIMER 3-39 to 40PRIMER THINNER 3-39SOAK STRIPPING 3-40SOLVENT 3-25, 3-39 to 40STRIPING 3-40TANK STRIPPER 3-40THINNER 3-39 to 40URETHANE 3-39 to 40

PAPER TOWELCLEANING 2-107DISPENSER 2-106 to 107PAPER PRODUCT 2-106 to 108, 3-9WIPES 2-105 to 107, 3-9WYPALLS 2-105 to 107

PENETRATE OILAEROSOL 3-26CLEANING 3-26DEGREASER 3-26LUBRICANT 3-26OIL 3-26RUST PENETRATING 3-26SOLVENT 3-26SPRAYER 3-26

PILOTHELI-COIL 2-40INSERT 2-40

PINBOLT 2-129CHAIN 1-40CHAIN WRENCH 1-40CUTTING TOOL 1-40CYLINDER 1-40DRIVER 1-47 to 48ENGINE 2-129ENGINE TOOL 2-129FILTER 1-40FUEL SYSTEM TOOL 1-40HAND TOOL 1-40, 1-47 to 48HYDRAULIC 1-40INSTALLATION TOOL 2-129LUBE SYSTEM TOOL 1-40MAINTENANCE TOOL 1-40MASTER 2-129PIN REMOVER 1-47 to 48REMOVAL TOOL 2-129SPRING 1-40STRAP WRENCH 1-40TRACK 2-129UNDERCARRIAGE 2-129

PIPECOUPLING 2-35DIE 2-33ORIFICE 2-35PLUG 2-35, 2-49REWORK 2-35SEAL 2-49TAP 2-35TAP SET 2-35TAPER 2-35THREAD REPAIR 2-34

PLASTICCASE 1-85CLEANING 3-9FOAM BLOCK 1-85JANITORIAL EQUIPMENT 2-127PLASTIC COVER 3-9PROTECTIVE 2-122, 3-9SHIPPING 2-122STORAGE 1-85, 2-122WASTE DISPOSAL 2-127

PLATEACCESSORY 1-89LIFTING 1-89SLING 1-89

MEASURING TOOL cont. OIL cont. PAINT PRODUCTS cont.


Nomenclature Index


PLIERSHAND TOOL 1-2 to 5, 1-8, 1-51 to 52, 1-58MASTER LINK 1-52PISTON PIN 1-52REPLACEMENT 1-52RETAINER 1-52RETAINING 1-52RETAINING RING 1-52RETAINING RING PLIERS 1-52SERVICEMAN’S HAND TOOL 1-52SNAP RING 1-52SNAP RING PLIERS 1-52TILT CYLINDER 1-52TIP 1-52UNDERCARRIAGE 1-52

PLUGADAPTER GROUP 2-50ASSEMBLY 2-49BOGIE 2-32BRAKE 2-49CAP 2-49 to 55CONE 2-26CONNECTOR 2-75COUPLING 2-35ELECTRICAL 2-75ENGINE 2-50ENGINE TOOL 2-50FRAME & HITCH TOOL 2-49GAUGE 2-49HOSE 2-52 to 55HYDRAULIC 2-49O-RING 2-49ORIFICE 2-35PIPE 2-35, 2-49PRESS 2-49PROTECTION 2-49, 2-52 to 55PROTECTOR 2-49 to 50PUMP 2-49REPAIR PART 2-49 to 50REWORK 2-35, 2-42SAFETY GOGGLES 2-54SEAL 2-49SHIPPING 2-49SPIRALOCK THREADS 2-32STEERING 2-50STORAGE 2-52 to 55SUPPLY 2-75SURFACE RECONDITIONING 2-26SUSPENSION 2-49TAP 2-32, 2-35, 2-42TAPER 2-35TEE 2-49TESTING 2-49THREAD RESTORATION 2-35, 2-42TIRE 2-49TRANSPARENT 2-49UNDERCARRIAGE 2-32VEHICLE SYSTEM TOOLS 2-49

PNEUMATICAIR 1-71 to 72AIR POWERED 1-73 to 74ANTI-FREEZE 3-35CHEMICAL 3-25, 3-35CLEANING 1-73 to 74CUTTING 1-72DRILL 1-71GRINDING 1-70GUN 1-73 to 74HAMMER 1-71 to 72HOSE 3-25, 3-35MARKER 1-72PNEUMATIC TOOL 1-69 to 74, 2-13,

3-25, 3-35POLISHER 1-69RATCHET 1-72SANDER 1-69, 2-13WRENCH 1-62

PNEUMATIC TOOLAIR 1-72AIR POWERED 1-73 to 74ANTI-FREEZE 3-35CHEMICAL 3-25, 3-35

CHISEL 1-72CLEANING 1-73 to 74COLLECTOR 1-74CUTTER BIT 1-72CUTTING 1-72ENGRAVER 1-72GRINDING 1-70GUN 1-73 to 74HAMMER 1-71 to 72HAND TOOL 1-71HOSE 3-25, 3-35MARKER 1-72NEEDLE 1-72PNEUMATIC 1-69 to 74, 2-13, 3-25, 3-35POLISHER 1-69PUNCH 1-72RETAINER 1-71REUSABLE 1-74SANDER 1-69, 2-13SPRAY GUN 1-74VACUUM 1-74WELDING 1-72

POLISHINGABRASIVE 2-24BELT 2-24BRUSH 2-5CONNECTING ROD 2-16CRANKSHAFT 2-24CUTTING 2-22DEBURRING 2-23, 2-27DISC 2-13, 2-24EMERY PAPER 2-26GRINDING 2-16MANDREL 2-24PISTON TOOL 2-16POLISHING STAR 2-13, 2-24SANDING 2-23 to 24, 2-27SURFACE RECONDITIONING 2-5, 2-13,

2-16, 2-22 to 24, 2-26 to 27WHEEL 2-16

POWERBATTERY 2-61 to 63BATTERY STARTING SYS 2-61 to 63BOOSTER 2-61 to 63CABLE 2-61 to 63MOUNTED 2-62SERVICE VEHICLE 2-62SOCKET 2-61 to 63

POWER TRAINBOX 1-83CAP 1-8CASE 1-85COUNTERSHIFT 1-43COVER 1-83HOSE ASSEMBLY 1-8HYDRAULIC 1-8MEASURING TOOL 1-85NIPPLE 1-8PLASTIC CASE 1-85PLEXIGLASS 1-83PRESSURE 1-8QUICK DISCONNECT 1-8REPAIR BOX 1-83REPAIR PART 1-85SOCKET 1-43STORAGE 1-85TEST GROUP 1-8TESTING TOOL 1-8TRANSMISSION 1-8, 1-43, 1-83, 1-85UN-VALVED 1-8WAREHOUSE EQUIPMENT 1-83

POWER TRAIN TOOLADAPTABLE CABLE 1-22AIR REGULATED 1-34, 1-61 to 62BEADLESS TIRE 3-29BLOCK 1-85BOLT 2-129BOX WRENCH 1-59DIFFERENTIAL 1-43DRIVE 1-22DUAL WHEEL 1-8, 1-18, 1-21, 1-62

EXTENSION 1-8, 1-21, 1-62FINAL DRIVE 1-22FOAM 1-85GAUGE 1-4 to 8HAND OPERATED 2-32HAND TOOL 1-4 to 8, 1-22, 1-43HYDROSTAT 1-85LUBRICANT 3-29MEASURING TOOL 1-4 to 8MOUNTING TIRE 3-29PINION 1-43POWER SHIFT 2-49PROTECTION 2-49REPAIR PART 1-85RIM 1-19, 1-62RIM LUBRICANT 3-29RUBBER 3-29SEAL 2-49SERVICEMAN’S HAND TOOL 1-4 to 8SHAFT NUT 1-43SOCKET 1-18 to 19, 1-33, 1-62SOCKET WRENCH 1-43STORAGE 1-85STRUT 1-34, 1-61 to 62TAP 2-32THREAD RESTORATION 2-32TIRE GAUGE 1-4 to 8TORQUE 1-8, 1-18 to 19, 1-21,

1-34, 1-59, 1-61 to 62TORQUING TOOL 1-59VEHICLE SYSTEM TOOLS 1-22WHEEL & TIRE 1-4 to 8, 1-18 to 19, 1-21,

1-34, 1-61 to 62, 1-85, 2-32, 3-29WHEEL NUT 1-34, 1-61 to 62WHEEL SALVAGE 2-32WRENCH 1-8, 1-18 to 19, 1-21,

1-34, 1-59, 1-61 to 62

PRESSGAUGE 2-49HYDRAULIC 2-49PLUG 2-49

PRESSUREASSEMBLY 1-8BOLT 2-128CAP 1-8COUPLING 1-8DIFFERENTIAL 1-8GAUGE 1-8, 2-123GAUGE GROUP 1-8, 2-128HEAT GUN 2-123HYDROSTAT 1-8, 2-128MEASURING TOOL 1-8NIPPLE 1-8POWER TRAIN 1-8PUMP 2-128QUICK DISCONNECT 1-8REPAIR PART 2-128SHRINK WRAP 2-123TESTING 1-8, 2-128TESTING TOOL 1-8UN-VALVED 1-8

PRESSURE GAUGEGAUGE 1-8MEASURING TOOL 1-8

PRESSURE WASHERACID 3-10ALKALINE 3-10CHEMICAL 3-10 to 11CLEANING 3-10 to 11COIL CLEANER 3-10CONCENTRATE 3-10DEGREASER 3-10DESCALANT 3-10DETERGENT 3-11HYDROSOLV CLEANER 3-10PHOSPHORIC 3-10SCALE 3-10SOAP 3-10

PROTECTIONADJUSTABLE 2-81CAP 2-52 to 55CHEMICAL 2-88, 2-102 to 103CHEMICAL RESISTANT GLOVE 2-95 to 96, 2-102 to 103DIELECTRIC GREASE 3-28EAR PLUGS 2-80GAUGE 1-61GLASSES 2-81GLOVES 2-92 to 96, 2-102 to 103GROMMET 1-61HARD HAT 2-89HEARING PROTECTION 2-80HOSE 2-52 to 55LEATHER 2-95, 2-102 to 103MAINTENANCE AIDS 2-96NOISE PROTECTION 2-80 to 81PERSONAL USE 2-81, 2-88,

2-93 to 95, 2-102 to 103PLUG 2-49, 2-52 to 55POWER SHIFT 2-49POWER TRAIN TOOL 2-49RAIN CLOTHING 2-91REPAIR PART 2-49REUSABLE 2-80SAFETY 2-81, 2-84, 2-89,

2-93 to 96, 2-102 to 103SEAL 2-49SHIPPING 2-49STORAGE 2-52 to 55TUNE-UP 3-28VEHICLE SYSTEM TOOLS 2-49WELDING GLOVES 2-84, 2-94

PULLERCRANKSHAFT 2-40EXTENSION NOZZLE 1-2, 1-9, 1-21, 1-34GEAR 2-40GUIDE 2-40HAND TOOL 1-2, 1-9, 1-21, 1-34HYDRAULIC 2-40

PUMPASSEMBLY 1-16BOLT 2-128 to 129COTTER PIN 2-129DRIVE 1-16ELECTRICAL 1-65GAUGE GROUP 2-128HAND TOOL 1-65HEX KEY WRENCH 1-41HYDRAULIC 1-16, 1-65, 2-49, 2-129HYDROSTAT 1-41, 2-128LOCKWASHER 2-129LUBRICATION 2-129O-RING 2-49PLUG 2-49PRESSURE 2-128REPAIR PART 2-49, 2-128 to 129SEAL 2-49SOCKET 1-16STEERING 2-49SUPPLY 2-49TEE 2-49TEST GROUP 2-49TESTING 2-49, 2-128TORQUE 1-65WRENCH 1-41, 1-65

QQUICK DISCONNECTAIR COUPLER 1-62AIR DISCONNECT 1-62AIR MOTOR 1-62CAP 1-8GREASE PUMP 1-62LUBE EQUIPMENT 1-62NIPPLE 1-8OIL PUMP 1-62POWER TRAIN 1-8PRESSURE 1-8

PNEUMATIC TOOL cont. POWER TRAIN TOOL cont.



Nomenclature Index

TESTING TOOL 1-8UN-VALVED 1-8

RRADIATORCONDITIONER 3-13COOLANT 3-13COOLING SYSTEM 3-13, 3-34EPOXY 3-34KIT 3-13REPAIR 3-34SEALANT 3-34TEST KIT 3-13TEST STRIP 3-13

REFRIGERANTAIR CONDITIONING 3-29AIR TOOL OIL 3-29COMPRESSOR 3-29OIL 3-28PUMP OIL 3-28 to 29VACUUM PUMP 3-29

REMOVAL TOOLBOLT 2-129HAND TOOL 2-47INSTALLATION TOOL 2-129MASTER 2-129PIN 2-129STUD REMOVER 2-47TRACK 2-129UNDERCARRIAGE 2-129WEDGE 2-77

REPAIR KITBEARING MOUNT 3-1, 3-3BREAKER BAR 1-20COARSE 2-37 to 38COMPOUND 3-1, 3-3EPOXY 3-34FUEL TANK REPAIR KIT 3-34HAND TOOL 1-14 to 15, 1-20 to 21, 1-58HELI-COIL 2-37 to 38, 2-42HYDRAULIC 1-63 to 64IMPACT 1-66 to 68INSERT 2-38, 2-42KIT 1-15, 1-20 to 21, 2-42, 3-34PIPE THREAD SEALANT 2-113, 3-1, 3-5PRIMER 3-1, 3-5RATCHET 1-14 to 15, 1-20 to 21, 1-58REPAIR 1-14, 1-20 to 21, 2-37 to 38REPAIR PART 1-15, 1-20 to 21RUBBER 3-2SEALANT 2-113, 3-1, 3-3, 3-5, 3-34SERVICE KIT 1-58SERVICEMAN’S HAND TOOL 1-14,

1-20 to 21SOCKET 1-14, 1-20 to 21THREAD REPAIR 2-37 to 38TOOL 1-64TOOL SET 1-14, 1-20 to 21TORQUE 1-58, 1-63TORQUING TOOL 1-64WRENCH 1-15, 1-20 to 21, 1-58,

1-63 to 64

REPLACEMENTADAPTER FITTING 1-22BIT 1-31BLADE 1-54CASE 1-87FILTER 2-81FOAM 1-87FUSE 2-129HAND TOOL 1-22, 1-54HELI-COIL 2-42INSERT 1-87, 2-42KIT 2-42KNIFE 1-54O-RING 1-87PADDING 1-87PERSONAL USE 2-81PLIERS 1-52

PLUNGER 3-5PROTECTOR 1-87RAZOR KNIFE 1-54REPLACEMENT KIT 2-42RESPIRATOR 2-81RETAINING 1-52RETAINING RING PLIERS 1-52SAFETY 2-81SERVICEMAN’S HAND TOOL 1-54SNAP RING 1-52SNAP RING PLIERS 1-52STORAGE 1-87TIP 1-52UNDERCARRIAGE 1-52UTILITY KNIFE 1-54

RESPIRATORFILTER 2-81 to 82PERSONAL USE 2-81REPLACEMENT 2-81SAFETY 2-81 to 82

RETAINERHAND TOOL 1-21, 1-71HANDLE 1-21PISTON PIN 1-52PLIERS 1-52PNEUMATIC TOOL 1-71

RINGSFILTER 1-40FUEL SYSTEM TOOL 1-40LUBE SYSTEM TOOL 1-40MAINTENANCE TOOL 1-40RETAINING 1-40STRAP WRENCH 1-40

RIVETHAND TOOL 1-53INSTALLATION TOOL 1-53PISTON 1-53POPPER VALVES 1-53SERVICEMAN’S HAND TOOL 1-53TOOL SET 1-53TRANSMISSION 1-53

RODCUTTING 2-48MINI CUTTING TORCH 2-48THREADED 2-130

ROLLERCUTTING TOOL 1-40FILTER 1-40HAND TOOL 1-40IDLER 1-2 to 3, 1-54RULE 1-3SCRAPER 1-2 to 3, 1-54SERVICE KIT 1-2 to 3, 1-54TRACK 1-2 to 3, 1-54UNDERCARRIAGE 1-2 to 3, 1-54

RUBBERADHESIVE & SEALANT 3-7BEADLESS TIRE 3-29BONDING 3-7COMPOUND 3-31FLEXIBLE GASKET 3-7FORM-IN-PLACE GASKET 3-7LUBRICANT 3-29 to 30MOUNTING TIRE 3-29O-RING 3-31POWER TRAIN TOOL 3-29R.T.V. 3-7REPAIR KIT 3-2RIM LUBRICANT 3-29SILICONE 3-7WHEEL & TIRE 3-29

RUST PREVENTIVEADDITIVE 3-34AEROSOL 3-26CABLE 3-26CHAIN 3-26COATING 3-31

FUEL 3-34FUEL LINE 3-34GAS ENGINE 3-34LUBRICANT 3-26, 3-31NON-AEROSOL 3-26OIL 3-30 to 31RUST PENETRATING 3-26SOLVENT CUTBACK GREASE 3-31STORAGE 3-30 to 31VAPOR CORROSION INHIBITING 3-30WATER DISPLACING 3-31

SSAFETYABRASIVE COATED MAT 2-109ABSORBENT 1-69, 2-98 to 103,

2-106 to 107ABSORBENT PILLOW 2-98, 2-102 to 103ABSORBENT SOCK 2-98, 2-102 to 103ADJUSTABLE 2-81ANTI-FATIGUE MAT 2-108 to 109BATTERY 2-68 to 69BEAD BLAST EQUIPMENT 2-96BIB 2-84BLANKET 2-79CHEMICAL RESISTNT GLOVE 2-95 to 96,

2-102 to 103CLAMP KIT 2-67CLEANING 2-106 to 108COMBINATION 2-97CONTINUITY TESTER 2-68EAR PLUGS 2-81ELECTRICAL PRODUCT 1-3, 2-67 to 69ENGINE 2-110ENGINE TOOL 2-110EYE GUARD 1-3, 2-85, 2-87EYE LOUPE 2-110EYE PROTECTION 1-3, 2-83, 2-85,

2-87, 2-89 to 90FACE PROTECTION 2-89FACE SHIELD 2-89 to 90FACE SHIELD WINDOW 2-89FILTER 2-81 to 82FIRST AID 2-79FIRST AID BLANKET 2-79FLASHLIGHT 1-3, 2-67 to 69FLOOR MAT 2-108 to 109FLOOR PAD 2-108 to 109GLASSES 1-3, 2-85, 2-87GLOVES 2-93 to 96, 2-102 to 103HARD HAT 2-89HEAD GEAR 2-89HEAD PROTECTION 2-89HEARING PROTECTION 2-81HOLSTER 2-67INSPECTION LIGHT 2-68 to 69INTERLOCKING MAT 2-109LEATHER 2-95, 2-102 to 103LIGHT 1-3, 2-67 to 69LOUPE 2-110MAGNIFYING GLASS 2-110MAINTENANCE AIDS 2-96NOISE PROTECTION 2-81OIL ABSORBENT PAD 2-98PAD 1-69PADLOCK 2-97PERSONAL USE 1-3, 2-67 to 69, 2-79,

2-81, 2-89 to 90, 2-93 to 97,2-102 to 103, 2-108 to 110, 3-37

PLUG STRIP 2-70PROTECTION 2-81, 2-84, 2-89,

2-93 to 96, 2-102 to 103REPLACEMENT 2-81REPLACEMENT LENS 2-83RESPIRATOR 2-81 to 82SAFETY GLASSES 1-3, 2-81, 2-85 to 87SAFETY SHIELD 2-89 to 90SAFETY VEST 2-90SANDING 1-69SOUND PROOFING 2-81TESTER 2-68TORCH 1-3, 2-67 to 68WARNING KIT 2-112

WELDING 2-84WELDING COAT 2-83 to 84WELDING GLOVES 2-84, 2-94WELDING GOGGLES 2-83WELDING HELMET 2-82 to 83WELDING PROTECTION 2-79, 2-84WELDING REPLACEMENT LENS 2-83

SALVAGECRACK REPAIR 1-78SURFACE RECONDITIONING 2-48THREAD REPAIR 1-77 to 78

SANDERELECTRIC MOTOR 2-12 to 13PAD 1-69PNEUMATIC 1-69, 2-13PNEUMATIC TOOL 1-69, 2-13

SAWBLADE 1-3, 1-45, 1-76HACKSAW 1-3, 1-45, 1-76HAND TOOL 1-3, 1-45, 1-76SABER 1-45, 1-76SERVICEMAN’S HAND TOOL 1-45, 1-76TOOL 1-45

SCALEACID 3-10COIL CLEANER 3-10DESCALANT 3-10HYDROSOLV CLEANER 3-10PHOSPHORIC 3-10PRESSURE WASHER 3-10STAINLESS STEEL 1-50

SCREWBOLT 2-128BOLT EXTRACTOR 2-44 to 45BOLT REMOVER 2-44 to 45CAP 2-129HAND TOOL 2-44 to 45HOLLOW HEAD 1-43REPAIR PART 2-128SCREW EXTRACTOR 2-44 to 45SERVICEMAN’S HAND TOOL 2-44 to 45TOOL SET 2-44 to 45WRENCH 1-43

SCREWDRIVERHAND TOOL 1-2 to 9, 1-44 to 45PLASTIC HANDLE SCREWDRIVER 1-2, 1-45

SEALACCESSORY 2-49, 2-112 to 114ADDITIVE 3-32ASSEMBLY 2-49BRAKE 2-49CHEMICAL 3-9CUP 1-54FASTENER 2-123FLUID EXTRACT TOOL 2-49, 2-112 to 114FLUID SAMPLING 2-49, 2-112 to 114FRAME & HITCH TOOL 2-49HAND TOOL 1-3, 1-54HYDRAULIC 2-49HYDRAULIC CYLINDER 3-32LUBRICANT 3-9, 3-32METER 2-49O-RING 2-49O-RING KIT 1-87O-RING SEAL 1-87, 2-49, 2-112 to 114OIL 2-49, 2-112 to 114, 3-32PICK 1-54PIPE 2-49PLUG 2-49POWER TRAIN TOOL 2-49PROTECTION 2-49PUMP 2-49REPAIR PART 2-49, 2-112 to 114SEAL PICK 1-54SERVICEMAN’S HAND TOOL 1-3, 1-54SHIPPING 2-49SPRAYER 3-26

QUICK DISCONNECT cont. REPLACEMENT cont. RUST PREVENTIVE cont. SAFETY cont.


Nomenclature Index


STEERING 2-49SUPPLY 2-49SUSPENSION 2-49TEST GROUP 2-49TESTING 2-49TIRE 2-49TRANSPARENT 2-49VEHICLE SYSTEM TOOLS 2-49

SEAL KITCLEANING 3-9HARDWARE KIT 2-128HYDRAULIC 1-63HYDRAULIC WRENCH 1-64KEY PAD 2-128SQUARE DRIVE 1-64TORQUE 1-63WRENCH 1-63

SERVICECREEPER, MECHANIC’S 2-111SERVICE TOOL 2-111

SHAFTDISC 2-8, 2-10 to 11ENGINE TOOL 2-8, 2-10 to 11MANDREL 2-8, 2-10 to 11SURFACE RECONDITIONING 2-8,

2-10 to 11THREADED 2-8, 2-10 to 11

SHOPACCESSORY 2-110AIR 1-73DISPLAY 1-73FLOOR MAT 2-110FUNNEL 2-115HOSE 1-73JAW INSERT 2-56KIT 2-56OIL DISPENSING 2-115PUMP CAN 2-115SWIVEL 2-56VISE 2-56

SHRINK TUBINGCONNECTOR 2-77ELECTRICAL 2-76 to 77HEAT SHRINK 2-76INSULATOR 2-77

SHRINK WRAPFUEL LINE 2-123GAUGE 2-123GUARD 2-123HEAT GUN 2-123HEAT SHRINK 2-121HOSE ADAPTER 2-123PRESSURE 2-123PROTECTIVE 2-121REGULATOR 2-123SPARK PLUG 2-123STORAGE 2-121VALVE ASSEMBLY 2-123

SLEEVEHELI-COIL 2-40INSERT 2-40LIFTING 1-89PROTECTIVE 1-89SLEEVE ASSEMBLY 2-40SLING 1-89

SLINGACCESSORY 1-8, 1-89ASSEMBLY 1-88LEVEL ASSEMBLY 1-88LIFTING 1-8, 1-88 to 90LOAD LEVELER 1-88PLATE 1-89PROTECTIVE 1-89SHACKLE 1-8, 1-89SLEEVE 1-89TAG 1-88

TIRE 1-90TRANSMISSION 1-88

SMOKE CANDLEAIR LEAK DETECTION 3-23BOMB 3-23CANDLE 3-23LEAK DETECTION 3-23

SNAP RINGPLIERS 1-52REPLACEMENT 1-52RETAINING 1-52SNAP RING PLIERS 1-52TIP 1-52UNDERCARRIAGE 1-52

SOCKETADAPTER 1-1 to 2, 1-5 to 6, 1-9, 1-15,

1-22, 1-54ADJUSTABLE 1-15ASSEMBLY 1-15 to 16, 1-31BAR 1-43BATTERY 2-61 to 63BATTERY STARTING SYS 2-61 to 63BIT 1-5, 1-31, 1-43BOLT 1-19BOOSTER 2-61 to 63BRAKE 1-33BREAKER BAR 1-20CABLE 2-61 to 63COUNTERSHIFT 1-43CYLINDER 1-33CYLINDER HEAD TOOL 1-2, 1-13,

1-17 to 18, 1-33, 1-44DISASSEMBLY TOOL 1-16DRESSING TOOL 1-19, 1-34DRIVE 1-16, 1-19, 1-23DRIVER 1-1 to 10, 1-12 to 14, 1-17 to 18,

1-20 to 22, 1-31DUAL WHEEL 1-18, 1-62ENGINE TOOL 1-1 to 6, 1-8 to 10,

1-12 to 14, 1-17 to 18,1-20 to 22, 1-33

EXTENSION 1-1 to 2, 1-10, 1-21F.T. 1-1, 1-5, 1-22, 1-54FLYWHEEL 1-1, 1-4, 1-14, 1-18FRAME & HITCH TOOL 1-19, 1-43FUEL SYSTEM TOOL 1-2, 1-9, 1-17 to 18GLOW PLUG 1-2, 1-17GOVERNOR 1-15GOVERNOR TOOL 1-2, 1-9, 1-17HAND TOOL 1-1 to 23, 1-26 to 34,

1-43 to 44, 1-54, 1-66 to 68, 1-80HANDLE 1-1 to 2, 1-4 to 5, 1-7, 1-9 to 10,

1-17, 1-22, 1-54HEX BIT SET 1-1, 1-3 to 5, 1-7 to 8,

1-12, 1-15, 1-18, 1-31HITCH 1-33HYDRAULIC 1-16IMPACT 1-11, 1-17, 1-19, 1-27 to 28,

1-32 to 33IMPACT SOCKET 1-6 to 7, 1-11,

1-13 to 14, 1-17 to 19, 1-27 to 30,1-32 to 34, 1-66 to 68

IMPACT TOOL 1-6 to 7, 1-19,1-29, 1-33 to 34

INJECTION PUMP 1-15INSTALLATION TOOL 1-44KIT 1-10, 1-27MAINTENANCE TOOL 1-18METER 1-15METRIC 1-31METRIC SOCKET 1-3, 1-6 to 8, 1-19,

1-26, 1-29, 1-31, 1-33 to 34MOUNTED 2-62POWER 2-61 to 63POWER TRAIN 1-43POWER TRAIN TOOL 1-18 to 19, 1-33, 1-62PUMP 1-16RATCHET 1-14, 1-20 to 21, 1-23REMOVAL 1-10, 1-27REPAIR 1-14, 1-20 to 21REPAIR KIT 1-14, 1-20 to 21RETAINING 1-1, 1-4, 1-14, 1-18

RETAINING NUT 1-19, 1-33RIM 1-19, 1-62SERVICE VEHICLE 2-62SERVICEMAN’S HAND TOOL 1-1 to 15,

1-17 to 23, 1-29, 1-31,1-33 to 34, 1-43 to 44, 1-54

SOCKET EXTENSION 1-3 to 4, 1-6, 1-9,1-12, 1-21

SOCKET WRENCH 1-19, 1-33 to 34, 1-43SPARK PLUG 1-13, 1-18, 1-44SPARK PLUG SOCKET 1-44SUSPENSION 1-19, 1-43TOOL 1-1, 1-5, 1-22, 1-26, 1-32, 1-34,1-54TOOL SET 1-1 to 15, 1-17 to 23, 1-29, 1-31,

1-33 to 34, 1-43 to 44, 1-54TORQUE 1-13, 1-18 to 19, 1-44, 1-62TORQUE CONTROL TOOL 1-2, 1-9, 1-17TORX 1-3, 1-16TRACK 1-19TRANSMISSION 1-17, 1-43U-JOINT 1-23UNIVERSAL 1-1 to 2, 1-13, 1-17, 1-28, 1-32UNIVERSAL JOINT 1-2, 1-9, 1-17,

1-22, 1-34WHEEL & TIRE 1-18 to 19, 1-62WRENCH 1-3 to 7, 1-9 to 15, 1-17 to 19,

1-27, 1-29 to 30, 1-32 to 34,1-43 to 44, 1-62, 1-66 to 68, 1-80

SOLVENTAEROSOL 3-25AIR CONDITION TOOL 3-29AIR CONDITIONING 3-29CLEANING 3-25 to 26DEGREASER 3-26EPOXY 3-40HIGH FLASH 3-25LUBRICANT 3-26MAINTENANCE AIDS 3-25MINERAL SPIRIT 3-25OIL 3-26PAINT 3-39 to 40PAINT PRODUCTS 3-25, 3-39 to 40PAINT THINNER 3-39 to 40PENETRATE OIL 3-26PRIMER 3-39 to 40PRIMER THINNER 3-39 to 40RETARDER 3-40SPRAYER 3-26THINNER 3-39 to 40URETHANE 3-40WASHER 3-25

SPACERCUTTING 1-40HAND TOOL 1-40

SPANNER WRENCHHAND TOOL 1-8, 1-41SERVICEMAN’S HAND TOOL 1-8, 1-41SPANNER 1-40TOOL SET 1-8, 1-41WRENCH 1-40

SPRAY BOTTLEBOTTLE 3-27

STANDADAPTER 1-22 to 23COTTER PIN 2-129CYLINDER 1-22 to 23ENGINE LIFTING & POSITIONING 2-129ENGINE OVERHAUL 2-129ENGINE RE-BUILD 2-129ENGINE REPAIR 2-129ENGINE ROLL-OVER TOOL 2-129HYDRAULIC 1-22 to 23MULTIPLIER 1-22 to 23REPAIR 1-22 to 23TORQUE 1-22 to 23

STARTERENGINE STARTING 1-22EXTENSION 1-22

STARTING SYSTEM 1-22UNIVERSAL 1-22

STORAGEACCESSORY 1-85BLOCK 1-61, 1-85BOX 1-85 to 87, 2-122CABINET 1-80 to 83CAP 2-52 to 55CASE 1-61, 1-85 to 87COATING 3-31CONNECTOR 1-86COVER 1-80DIVIDER 1-85DIVIDER KIT 1-85EXTENSION NOZZLE 1-74FLAMMABLE 1-74FOAM 1-61, 1-85, 1-87FOAM BLOCK 1-85FOAM PAD 1-85HAND TOOL 1-2, 1-8, 1-15, 1-82 to 83HEAT SHRINK 2-121HOSE 2-52 to 55HYDROSTAT 1-85INSERT 1-61, 1-85, 1-87LINER 1-85LOCK 1-83LUBRICANT 3-31MEASURING TOOL 1-85NOZZLE ASSEMBLY 1-74O-RING KIT 1-86OIL 3-30 to 31PACKAGING 2-121PACKING 1-85PADDING 1-61, 1-85, 1-87PAPER 2-122PLASTIC 1-85, 2-122PLASTIC CASE 1-85PLUG 2-52 to 55POWER TRAIN 1-85POWER TRAIN TOOL 1-85PROTECTION 2-52 to 55PROTECTIVE 2-121 to 122PROTECTOR 1-87REPAIR PART 1-61, 1-85REPLACEMENT 1-87RUST PREVENTIVE 3-30 to 31SAFETY GOGGLES 2-54SAFETY TANK 1-74SERVICEMAN’S HAND TOOL 1-2, 1-8,

1-15, 1-82 to 83SHIPPING 2-121 to 122SHRINK WRAP 2-121SOLVENT CUTBACK GREASE 3-31SPRAY GUN 1-74STORE CABINET 1-79, 1-85SURE SEAL 1-86TOOL BOX 1-2, 1-8, 1-15, 1-80 to 83TOOL CHEST 1-2, 1-8, 1-15, 1-82 to 83TOOL STORAGE 1-83TOP DECK 1-80TRANSMISSION 1-85VAPOR CORROSION INHIBITING 3-30VIBRATION 1-87WAREHOUSE EQUIPMENT 1-2, 1-8,

1-15, 1-82 to 83WATER DISPLACING 3-31WHEEL & TIRE 1-85

STRAPADJUSTMENT 2-122COIL 2-122FUEL SYSTEM TOOL 1-40LUBE SYSTEM TOOL 1-40MAINTENANCE TOOL 1-40NYLON 2-123TIE 2-111

STUDINSTALLER 2-47

SUPPORTBRACKET 2-16 to 18BRAKE 2-35COLUMN 2-35

SEAL cont. SLING cont. SOCKET cont. STARTER cont.



Nomenclature Index

GRINDING 2-16 to 18HOLDER 2-16 to 18HOUSING 2-35STEERING 2-35SURFACE RECONDITIONING 2-16 to 18TAP 2-35VALVE STEM 2-16 to 18WHEEL 2-16 to 18

SURFACE RECONDITIONINGABRASIVE 2-3 to 6, 2-10 to 14,

2-17 to 20, 2-22, 2-24, 2-26ACCESSORY 1-73, 2-21ADAPTER 2-16 to 18AIR 1-73BELT 2-24BENCH 2-21BRACKET 2-16 to 18BRUSH 2-3 to 5, 2-11, 2-18CLEANING 2-9, 2-19CONE 2-26CONNECTING ROD 2-16CRANKSHAFT 2-24CUT-OFF WHEEL 2-20CUTTING 2-9, 2-20, 2-22CYLINDER 2-4CYLINDER HONE 2-25DEBURRING 2-23, 2-26 to 27DISC 1-73, 2-6 to 17, 2-22, 2-24DRILL 2-21, 2-25DRILL SHARPENING 2-21EMERY PAPER 2-26ENGINE TOOL 2-8, 2-10 to 11, 2-13FIBER 2-12 to 13FLAP BRUSH 2-5FLEX HONE TOOL 2-25GRINDING 1-73, 2-13, 2-16 to 22, 2-25HAND OPERATED 1-73HOLDER 2-7 to 11, 2-16 to 18HOSE 1-73IDLER 2-9LIFT CYLINDER 2-9LINK 2-9MANDREL 2-8 to 11, 2-16 to 17, 2-20,

2-22, 2-24MAST 2-9METAL 2-9P.S.A. 2-14 to 15PAD 2-7 to 8, 2-10 to 11, 2-13, 2-22PEDESTAL 2-21PISTON TOOL 2-16PLUG 2-26POLISHING 2-5, 2-13, 2-16,

2-22 to 24, 2-26 to 27POLISHING STAR 2-13, 2-24RECONDITIONING 2-9, 2-18RESURFACE 2-18SALVAGE 2-48SANDING 2-22 to 24, 2-27SHAFT 2-8, 2-10 to 11SUPPORT 2-16 to 18THREADED 2-8, 2-10 to 11UNDERCARRIAGE 2-9VALVE SEAT 2-25VALVE STEM 2-16 to 18WHEEL 2-2 to 3, 2-16 to 22, 2-25WIRE 2-2 to 3WIRE BRUSH 2-3 to 4

SWIVELJAW INSERT 2-56REPAIR PART 1-22SHOP 2-56UNIVERSAL JOINT 1-22VISE 2-56

TTACHOMETERBOLT 2-128DIAGNOSTIC 2-128MARINE ENGINE 2-129STEERING 2-129

TEST GROUP 2-129WASHER 2-129

TAGLOAD LEVELER 1-88SLING 1-88

TAPBEVEL GEAR 2-35BOGIE 2-32, 2-35BRAKE 2-35BUTTRESS TAPS 2-35CASE 2-35COLUMN 2-35COUPLING 2-35GUIDE 2-40HAND OPERATED 2-31 to 32, 2-35, 2-42HELI-COIL 2-37 to 40HOUSING 2-35IMPLEMENT AND LIFT ARM TOOL 2-32, 2-35, 2-42INSERT 2-37 to 40LINKAGE PINS 2-32, 2-35, 2-42MACHINE 2-31METAL CUTTING THREAD INSERT 2-35METRIC 2-35, 2-39, 2-42ORIFICE 2-35PIPE 2-35PLUG 2-32, 2-35, 2-42POWER TRAIN TOOL 2-32RECONDITIONING 2-32REWORK 2-35, 2-42SPIRALOCK THREADS 2-32, 2-35STANDARD 2-39STEERING 2-35STEERING CLUTCH 2-35SUPPORT 2-35TAP SET 2-35TAPER 2-35THREAD RESTORATION 2-32, 2-35, 2-42UNDERCARRIAGE 2-32, 2-35WHEEL & TIRE 2-32WHEEL SALVAGE 2-32WRENCH 2-32, 2-36

TAPEALUMINUM 2-118, 2-125BLOCK 3-2CHEMICAL 3-2DISPENSER 2-119DUCT 2-118ELECTRICAL 2-76, 2-118ELECTRICAL TAPE 2-118ENGINE REPAIR 3-2FILAMENT 2-117, 2-119MARKER 2-125MASKING 2-116PACKAGING 2-116 to 117, 2-125PAINT 2-116RUBBER MASTIC TAPE 2-119TAPE DISPENSER 2-76THREAD LUBRICANT 2-117TRANSPARENT 2-117, 2-119WHEEL 2-125

TAPE MEASUREFLEXOMETER 1-3, 1-49 to 50HAND TOOL 1-3, 1-49 to 50MEASURE 1-49MEASURING 1-3, 1-49 to 50MEASURING RULE 1-3, 1-49 to 50MEASURING TAPE 1-3, 1-49 to 50PERSONAL USE 1-49SERVICEMAN’S HAND TOOL 1-3,

1-49 to 50

TEEFITTING 2-49HYDRAULIC 2-49PLUG 2-49PUMP 2-49STEERING 2-128TEST GROUP 2-128TESTING 2-49, 2-128WASHER 2-128

TEST KITADDITIVE 3-12ANTI-FREEZE ADDITIVE 3-12ANTI-FREEZE CONCENTRATE 3-12CHEMICAL 3-13CONDITIONER 3-13COOLANT 3-12 to 13COOLANT CONDITIONER 3-12 to 13COOLING SYSTEM 3-13DISTILLATION 3-12KIT 3-13RADIATOR 3-13TEST STRIP 3-13

TESTINGASSEMBLY 1-8BOLT 2-128 to 129COUPLING 1-8COVER 2-50DIFFERENTIAL 1-8DRIVE 2-129FITTING 2-49GAUGE 1-8GAUGE GROUP 1-8, 2-128GROWLER ARMATURE TEST 2-60HYDRAULIC 2-49 to 50, 2-128 to 129HYDROSTAT 1-8, 2-128MEASURING TOOL 1-8METER 2-49PLUG 2-49PRESSURE 1-8, 2-128PUMP 2-49, 2-128REPAIR PART 2-128SEAL 2-49STEERING 2-128TEE 2-49, 2-128TEST GROUP 2-60, 2-128WASHER 2-128

THREADEDCHAIN WRENCH 1-40CYLINDER 1-40DIE 2-33DIFFERENTIAL 1-40DISC 2-8, 2-10 to 11DRILL 2-38ENGINE TOOL 2-8, 2-10 to 11HARDWARE KIT 2-130HYDRAULIC 1-40INSERT 2-43LOCKNUT 1-40MANDREL 2-8, 2-10 to 11METRIC 2-43PINION 1-40ROD 2-130SHAFT 2-8, 2-10 to 11SURFACE RECONDITIONING 2-8,

2-10 to 11THREAD REPAIR 2-34, 2-38THREAD RESTORATION 2-34

TIMINGCASE 1-85FUEL SETTING 1-85FUEL SYSTEM TOOL 1-85GOVERNOR TOOL 1-85TOOL GROUP 1-85TORQUE CONTROL TOOL 1-85

TISSUESSAFETY GLASSES 2-88WIPES 2-88

TOOL BOXBOX 1-83CABINET 1-80 to 83CONTAINER 1-84COVER 1-80DRAWER LINER 1-83FOAM PAD 1-83HAND TOOL 1-2, 1-6, 1-8 to 9,

1-15, 1-82 to 83LOCK 1-82 to 83PADDING 1-83REPAIR PART 1-83

SERVICEMAN’S HAND TOOL 1-2,1-8 to 9, 1-15, 1-82 to 83

STORAGE 1-2, 1-8, 1-15, 1-80 to 83TOOL CHEST 1-2, 1-8 to 9, 1-15, 1-82 to 83TOOL SET 1-15, 1-83TOOL STORAGE 1-83TOP DECK 1-80WAREHOUSE EQUIPMENT 1-2, 1-8,

1-15, 1-82 to 83WATER RESISTANT 1-84

TOOL STORAGEACCESSORY 1-79CABINET 1-79HAND TOOL 1-4 to 5RATCHET 1-4 to 5STAINLESS STEEL 1-79STORAGE 1-83STORE CABINET 1-79THREAD REPAIR 2-34TOOL BAG 1-83TOOL BOX 1-83TOOL HOLDER 2-34WRENCH 1-23

TORCHCLAMP KIT 2-67CONTINUITY TESTER 2-68ELECTRICAL PRODUCT 1-3, 2-67FLASHLIGHT 1-3, 2-67 to 68HOLSTER 2-67LIGHT 1-3, 2-67 to 68PERSONAL USE 1-3, 2-67 to 68SAFETY 1-3, 2-67 to 68TESTER 2-68

TORQUEADAPTER 1-22 to 23, 1-59AIR REGULATED 1-34, 1-61 to 62BAR 1-61BEARING 1-59BLOCK 1-61BOX WRENCH 1-2 to 3, 1-51, 1-59CAMSHAFT 1-59CLICK TYPE 1-58COUPLER 1-61CROWFOOT 1-59CYLINDER 1-22 to 23CYLINDER HEAD TOOL 1-13, 1-18, 1-44DEGREE WHEEL 1-60DIAL TYPE 1-23, 1-58 to 59DRIVER 1-59DUAL WHEEL 1-8, 1-18, 1-21, 1-62ELECTRIC 1-61ELECTRONIC 1-61EXTENSION 1-2 to 3, 1-8, 1-21,

1-51, 1-59, 1-62GAUGE 1-61HAND IMPACT 1-65HAND TOOL 1-59HOSE 1-61HYDRAULIC 1-22 to 23, 1-63 to 65IMPACT SOCKET 1-65IMPACT TOOL 1-65MAIN BEARING 1-59MAIN CAP 1-59MOTOR GRADER SERVICE TOOL 1-58 to 59MOUNTING BRACKET 1-61MULTIPLIER 1-22 to 23, 1-34, 1-60 to 61NIPPLE 1-61POWER TRAIN TOOL 1-8, 1-18 to 19,

1-21, 1-34, 1-59, 1-61 to 62PUMP 1-65REGULATOR 1-61REPAIR 1-22 to 23REPAIR KIT 1-58, 1-63RIM 1-19, 1-62SEAL KIT 1-63SERVICE KIT 1-58SERVICEMAN’S HAND TOOL 1-65SOCKET 1-13, 1-18 to 19, 1-44, 1-62SPARK PLUG 1-13, 1-18, 1-44STAND 1-22 to 23

SUPPORT cont. TACHOMETER cont. TOOL BOX cont.


Nomenclature Index


STRUT 1-34, 1-61 to 62TESTER 1-61TOOL 1-59TOOL SET 1-65TUBE WRENCH 1-59TUBULAR ARM 1-59WHEEL & TIRE 1-8, 1-18 to 19,

1-21, 1-34, 1-61 to 62WHEEL NUT 1-34, 1-61 to 62WRENCH 1-2 to 3, 1-8, 1-18 to 19, 1-21,

1-23, 1-34, 1-51, 1-58 to 65

TORQUING TOOLADAPTER 1-59BOX WRENCH 1-59POWER TRAIN TOOL 1-59RAMP-RIGHT HANDED 1-58REPAIR KIT 1-64TOOL 1-64WRENCH 1-59

TORXHAND TOOL 1-3, 1-9, 1-16, 1-43SOCKET 1-3, 1-16WRENCH 1-9, 1-43

TRACK LINKFIXTURE 2-128WELDING 2-128

TRANSFORMERADAPTER 2-110BULB 2-110CARRYING CASE 2-110ELECTRICAL PRODUCT 2-110LAMP 2-110MICROFILM VIEW 2-110

TRANSMISSIONASSEMBLY 1-88AUTOMATIC 3-32BOLT 2-129BOX 1-83BRACKET 2-129CASE 1-85COUNTERSHIFT 1-43COVER 1-83FLUID 3-32HAND TOOL 1-17, 1-53HOSE ASSEMBLY 1-8HYDRAULIC 1-8LIFTING 1-88LUBRICANT 1-62, 3-17MEASURING TOOL 1-85OIL 1-62, 3-17PISTON 1-53PLASTIC CASE 1-85PLEXIGLASS 1-83POPPER VALVES 1-53POWER TRAIN 1-8, 1-43, 1-83, 1-85REMOVAL 2-129REPAIR BOX 1-83REPAIR PART 1-85RIVET 1-53SERVICEMAN’S HAND TOOL 1-17, 1-53SLING 1-88SOCKET 1-17, 1-43STORAGE 1-85TEST GROUP 1-8TOOL SET 1-17, 1-53UNIVERSAL JOINT 1-17WAREHOUSE EQUIPMENT 1-83

TUBEADJUSTABLE 3-26BALLAST 2-72CRANKSHAFT 3-28DAMPER 3-28ELECTRIC LIGHT 2-71 to 72ENGINE TOOL 3-28FLUORESCENT LIGHT 2-71 to 72LIGHT 2-71 to 72PORTABLE LIGHT 2-71 to 72REPAIR GROUP 3-28SPRAYER 3-26

VIBRATION 3-28WORK LIGHT 2-71 to 72

TURBO CHARGERANTI-SEIZE 3-27EXHAUST MANIFOLD 3-27EXHAUST SYSTEM 3-27GREASE 3-28HIGH LOAD GREASE 3-27HIGH TEMP 3-27MUFFLER 3-27REBUILDING 3-28SILICONE 3-28

UUNDERCARRIAGEBOGIE 2-32, 2-35BOLT 2-129CLEANING 2-9DISC 2-9ENGINE 2-129ENGINE TOOL 2-129FLOW METER 2-129HAND OPERATED 2-35HOLDER 2-9IDLER 1-2 to 3, 1-54, 2-9INSTALLATION TOOL 2-129LINK 2-9LOCKWASHER 2-129MANDREL 2-9MASTER 2-129MASTER LINK 1-52PIN 2-129PLIERS 1-52PLUG 2-32REMOVAL TOOL 2-129REPLACEMENT 1-52RETAINING 1-52RETAINING RING PLIERS 1-52ROLLER 1-2 to 3, 1-54RULE 1-3SCRAPER 1-2 to 3, 1-54SERVICE KIT 1-2 to 3, 1-54SNAP RING 1-52SNAP RING PLIERS 1-52SPIRALOCK THREADS 2-32, 2-35SURFACE RECONDITIONING 2-9TAP 2-32, 2-35TIP 1-52TRACK 1-2 to 3, 1-54, 2-129VEHICLE SYSTEM TOOLS 2-129

UNIVERSALDRIVE 1-23DRIVER 1-1 to 2, 1-13, 1-17ENGINE STARTING 1-22EXTENSION 1-22LEVEL 1-49SOCKET 1-1 to 2, 1-13, 1-17, 1-28, 1-32STARTER 1-22STARTING SYSTEM 1-22UNIVERSAL JOINT 1-1, 1-22

VVACUUM PUMPAIR CONDITIONING 3-29AIR TOOL OIL 3-29COMPRESSOR 3-29OIL 3-29PROTECTIVE 3-29PUMP OIL 3-29REFRIGERANT 3-29

VALVEADJUSTABLE 1-1, 1-3, 1-24CYLINDER HEAD TOOL 1-1, 1-3, 1-24TAPPET WRENCH 1-1, 1-3, 1-24WRENCH 1-1, 1-3, 1-24

VALVE SEATDRILL 2-25

GRINDING 2-25SURFACE RECONDITIONING 2-25WHEEL 2-25

VEHICLE SYSTEM TOOLSADAPTABLE CABLE 1-22BOLT 2-129COVER 2-50DRIVE 1-22ENGINE 2-129ENGINE TOOL 2-129FINAL DRIVE 1-22FLOW METER 2-129HAND TOOL 1-22LOCKWASHER 2-129PLUG 2-49POWER TRAIN TOOL 1-22PROTECTION 2-49REPAIR PART 2-49SEAL 2-49SHIPPING 2-49UNDERCARRIAGE 2-129

VIEWERHAND HELD MICROFILM VIEWER 2-110MICROFILM VIEWER 2-110

VISEACCESSORY 2-56 to 57BENCH VISE 2-56 to 57INSERT 2-56JAW CAP 2-57JAW INSERT 2-56 to 57KIT 2-56PIPE VISE 2-56 to 57SHOP 2-56SWIVEL 2-56WRENCH 1-2 to 3, 1-51

WWAREHOUSE EQUIPMENTBOX 1-83CABINET 1-82COVER 1-83HAND TOOL 1-2, 1-8, 1-15, 1-82 to 83PLEXIGLASS 1-83POWER TRAIN 1-83REPAIR BOX 1-83REPAIR PART 1-83SERVICEMAN’S HAND TOOL 1-2, 1-8,

1-15, 1-82 to 83STORAGE 1-2, 1-8, 1-15, 1-82 to 83TOOL BOX 1-2, 1-8, 1-15, 1-82 to 83TOOL CHEST 1-2, 1-8, 1-15, 1-82 to 83TRANSMISSION 1-83

WASHERCALIPER 2-129CENTERING 1-61, 2-129CLEANING 3-25COLLET 2-46ENGINE LIFTING & POSITIONING 2-129ENGINE OVERHAUL 2-129ENGINE RE-BUILD 2-129ENGINE REPAIR 2-129ENGINE ROLL-OVER TOOL 2-129EXTRACTOR 2-46FLUID 3-9HIGH FLASH 3-25HOUSING 2-46MARINE ENGINE 2-129MINERAL SPIRIT 3-25MINI CUTTING TORCH 2-48SOLVENT 3-25STEERING 1-61, 2-128 to 129STUD REMOVER 2-46TACHOMETER 2-129TEE 2-128TEST GROUP 1-61, 2-128 to 129TESTING 2-128TOOL 1-61, 2-129TRAVEL MOTOR D&A TOOLS 1-61, 2-129WINDSHIELD 3-9

WASTE RECEPTACLEJANITORIAL EQUIPMENT 2-126LINER 2-126

WELDINGANTI-SPATTER COMPOUND 3-35BIB 2-84BORING & WELDING COMPOUND 3-35CHISEL 1-72FIXTURE 2-128FLUX CORED 3-35MIG WELDING 3-35PNEUMATIC TOOL 1-72SAFETY 2-84TIP LUBE 3-35TRACK LINK 2-128WELDING COAT 2-84WELDING PROTECTION 2-84WIRE WELDING 3-35

WHEELABRASIVE 2-17 to 20ACCESSORY 2-21ADAPTER 2-16 to 17BENCH 2-21BRACKET 2-16 to 18BRUSH 2-3, 2-18CLEANING 2-19CONNECTING ROD 2-16CUT-OFF WHEEL 2-20CUTTING 1-51, 2-20DISC 2-16 to 17DRILL 2-21, 2-25DRILL SHARPENING 2-21GRINDING 2-16 to 22, 2-25HOLDER 2-16 to 18MANDREL 2-16 to 17PACKAGING 2-125PEDESTAL 2-21PIPE CUTTER 1-51PISTON TOOL 2-16POLISHING 2-16RIM 3-29SEALANT 3-29SUPPORT 2-16 to 18SURFACE RECONDITIONING 2-2 to 3,

2-16 to 22, 2-25TAPE 2-125TUBING CUTTER 1-51VALVE SEAT 2-25VALVE STEM 2-16 to 18WHEEL LOADER 3-29WIRE 2-2 to 3

WINDOWADHESIVE 3-8BURNING 3-8CAULKING 3-8CLEANING 3-8GLASS 1-54HANDLE 1-54HEAT 3-8HOLDER 3-8KNIFE 3-8TOOL KIT 3-8WINDOW INSTALLATION 1-54WINDSHIELD 1-54WIRE 3-8

WIPESABSORBENT 2-104 to 105CLEANING 2-104 to 105, 2-107DISPENSER 2-106 to 107PAPER PRODUCT 2-106 to 107, 3-9PAPER TOWEL 2-105 to 107, 3-9SAFETY GLASSES 2-88TISSUES 2-88WYPALLS 2-105 to 107

WIREBRUSH 2-3CRIMP TOOL 2-76SURFACE RECONDITIONING 2-2 to 3TIE 2-111

TORQUE cont. TUBE cont. VALVE SEAT cont.



Nomenclature Index

WHEEL 2-2 to 3WINDOW 3-8

WORK LIGHTBALLAST 2-72CHOP SAW 2-72CLAMP KIT 2-71ELECTRIC LIGHT 2-71 to 72FLUORESCENT 2-71 to 72FLUORESCENT LIGHT 2-71 to 72HAND TOOL 2-71LIGHT 2-71 to 72PERSONAL USE 2-71PORTABLE LIGHT 2-71 to 72TUBE 2-71 to 72VAPOR CLAMP KIT 2-71

WRENCHACCESSORY 1-64ADAPTER 1-12, 1-59ADJUSTABLE 1-1, 1-3, 1-24, 1-39AIR REGULATED 1-34, 1-61 to 62ALLEN WRENCH 1-3, 1-8 to 9, 1-42ASSEMBLY 1-43BAR 1-43, 1-61BEARING 1-59BIT 1-31BLOCK 1-61BOLT 1-39BOX 1-39BOX WRENCH 1-2 to 3, 1-39, 1-51, 1-59BREAKER BAR 1-1, 1-7, 1-14, 1-21, 1-54CHAIN WRENCH 1-39 to 40CLICK TYPE 1-58COMBINATION 1-1, 1-3 to 8, 1-23 to 24COMBINATION WRENCH 1-1, 1-3 to 9,

1-23 to 24, 1-35, 1-41COUPLER 1-61CROWFOOT 1-12, 1-21, 1-59CYLINDER HEAD TOOL 1-1, 1-3, 1-17,

1-24DEGREE WHEEL 1-60DIAL TYPE 1-23, 1-58 to 59DRIVER 1-59DUAL WHEEL 1-8, 1-18, 1-21, 1-62ELECTRIC 1-61ELECTRICAL 1-65ELECTRONIC 1-61EXTENSION 1-2 to 3, 1-8, 1-21,

1-51, 1-59, 1-62FERRULE 1-3, 1-41FILTER 1-40FRAME & HITCH TOOL 1-24, 1-35, 1-39FUEL SYSTEM TOOL 1-43GAUGE 1-12, 1-61GLOW PLUG 1-17GOVERNOR TOOL 1-43HAND IMPACT 1-65HAND TOOL 1-1, 1-3 to 15, 1-17 to 25,

1-27, 1-29 to 30, 1-32 to 36, 1-38 to 39, 1-41 to 44, 1-50 to 51,1-54, 1-59, 1-64, 1-66 to 68, 1-80

HANDLE 1-15, 1-21 to 22, 1-38HEX BIT SET 1-3, 1-42HEX KEY WRENCH 1-41HEX WRENCH DISPLAY 1-31HOLLOW HEAD 1-43HOSE 1-61HOSE ASSEMBLY TOOL 1-39HYDRAULIC 1-63 to 65HYDRAULIC CYLINDER 1-40HYDROSTAT 1-41IMPACT 1-66 to 68IMPACT SOCKET 1-14, 1-18 to 19,

1-30, 1-33, 1-65 to 68IMPACT TOOL 1-65INDICATOR 1-12INJECTION LINE 1-3, 1-41INJECTION PUMP 1-15INSTALLATION TOOL 1-44JAW 1-39KIT 1-10, 1-15, 1-20 to 21, 1-27LOCKNUT 1-43MAIN BEARING 1-59MAIN CAP 1-59

METRIC 1-15, 1-43METRIC SOCKET 1-3, 1-8, 1-35 to 36, 1-42MOTOR GRADER SERVICE TOOL 1-58 to 59MOUNTING BRACKET 1-61MULTIPLIER 1-34, 1-60 to 61NIPPLE 1-61OFFSET WRENCH 1-41OPEN END WRENCH 1-12, 1-25, 1-36, 1-41PIPE WRENCH 1-50 to 51PNEUMATIC 1-62POWER TRAIN TOOL 1-8, 1-18 to 19,

1-21, 1-34, 1-59, 1-61 to 62PRY BAR 1-1, 1-7, 1-14, 1-21PUMP 1-41, 1-65RATCHET 1-14 to 15, 1-20 to 21, 1-24,

1-36 to 38REGULATOR 1-61REMOVAL 1-10, 1-27REPAIR 1-66 to 68REPAIR KIT 1-15, 1-20 to 21, 1-58,

1-63 to 64REPAIR PART 1-12, 1-15, 1-20 to 21, 1-43REVERSING 1-14, 1-20 to 21RIM 1-19, 1-62SCREW 1-43SEAL KIT 1-63SERVICE KIT 1-58SERVICEMAN’S HAND TOOL 1-1, 1-3,

1-7 to 9, 1-12, 1-14 to 15, 1-18, 1-20 to 25, 1-35 to 36, 1-38 to 39, 1-41,

1-43 to 44, 1-50 to 51, 1-54, 1-65SLEEVE METERING TOOL 1-43SOCKET 1-3 to 7, 1-9 to 15, 1-17 to 19,

1-27, 1-29 to 30, 1-32 to 34,1-43 to 44, 1-62, 1-66 to 68, 1-80

SOCKET WRENCH 1-33, 1-43SPANNER 1-40SPANNER WRENCH 1-40SPARK PLUG SOCKET 1-44SPECIALTY 1-41STEERING 1-36STRAP WRENCH 1-4 to 9, 1-40, 1-54STRUT 1-34, 1-61 to 62SUSPENSION 1-24, 1-35, 1-39TAP 2-32, 2-36TAPPET WRENCH 1-1, 1-3, 1-24TESTER 1-61THREAD 1-39TOOL 1-4 to 9, 1-40, 1-54, 1-59TOOL SET 1-1, 1-3, 1-7 to 8, 1-12,

1-14 to 15, 1-20 to 25, 1-35 to 36,1-38 to 39, 1-41, 1-43 to 44, 1-65

TOOL STORAGE 1-23TORQUE 1-2 to 3, 1-8, 1-18 to 19, 1-21,

1-23, 1-34, 1-51, 1-58 to 65TORQUE CONTROL TOOL 1-43TORQUING TOOL 1-59TORX 1-9, 1-43TUBE WRENCH 1-3, 1-41, 1-59TUBULAR ARM 1-59VALVE 1-1, 1-3, 1-24VISE 1-2 to 3, 1-51WHEEL & TIRE 1-8, 1-18 to 19,

1-21, 1-34, 1-61 to 62WHEEL BEARING 1-43WHEEL NUT 1-34, 1-61 to 62

WIRE cont. WRENCH cont.



Part Number Index

030-4606 O-ring Seal 2-49068-0710 Pipe-Square Head Plugs,

1 1/4"-11 1/2" 2-49090-9019 Pipe-Hex Head Plug,1- 11 1/2" 2-49093-1321 JIS-BSPP Shipping Plugs, 1/4-19 2-50093-1322 JIS-BSPP Shipping Plugs, 1/2-14 2-50093-1323 JIS-BSPP Shipping Plugs, 3/4-14 2-50096-3829 JIS-BSPP Shipping Plugs, 1-11 2-50096-6073 JIS-BSPP Shipping Plugs, 3/8-19 2-50100-7017 Hydraulic Oil, 30 3-19100-7019 Transmission/Drive Train Oil, 10W 3-17101-2844 Antifreeze 3-12101-2845 Antifreeze 3-12102-9720 Air Filter Cleaning Kit 33--99102-9721 Filter Cleaner Oil 3-9103-2528 Transmission/Drive Train Oil, 10W 3-17105-3333 Multi-Purpose Tractor Oil, 10W-30 3-18105-3334 Multi-Purpose Tractor Oil, 10W-30 3-18105-3335 Multipurpose Tractor Oil, 10W-30 3-18105-3336 Natural Gas Engine Oil, 40 3-16105-5211 Metric Plugs, M12 x 1.5 2-50109-4395 Multi-Purpose Tractor Oil, 10W-30 3-18112-2866 Transmission/Drive Train Oil, 10W 3-17112-9183 Multi-Purpose Tractor Oil, 10W-30 3-18113-8490 Mini Fuse (10 Amp), bulk 2-129113-8491 Mini Fuse (15 Amp), bulk 2-129113-8492 Mini Fuse (20 Amp), bulk 2-129113-8493 Mini Fuse (25 Amp), bulk 2-129119-0781 Glass Sealant 3-7, 3-8119-5129 Gear Oil, 80W-90 3-19119-5130 Diesel Engine Oil, 15W-40 3-14119-5131 Diesel Engine Oil, 15W-40 3-14119-5132 Diesel Engine Oil, 40 3-14119-5133 Diesel Engine Oil, 40 3-14119-5134 Diesel Engine Oil, 40 3-14119-5135 Transmission/Drive Train Oil, 30 3-17119-5136 Transmission/Drive Train Oil, 30 3-17119-5137 Transmission/Drive Train Oil, 30 3-17119-5138 Transmission/Drive Train Oil, 50 3-17119-5139 Transmission/Drive Train Oil, 50 3-17119-5140 Transmission/Drive Train Oil, 50 3-17119-5141 Hydraulic Oil, 10W 3-19119-5142 Hydraulic Oil, 10W 3-19119-5143 Hydraulic Oil, 10W 3-19119-5144 Gear Oil, 80W-90 3-19119-5150 Coolant - gal 3-12119-5152 Extended Life Coolant 3-12120-5285 Diesel Engine Oil, 15W-40 3-14120-5286 Multi-Purpose Tractor Oil, 10W-30 3-18121-0326 Natural Gas Engine Oil, 30 3-16121-0327 Natural Gas Engine Oil, 40 3-16121-3908 Window Adhesive 3-8121-3911 Window Primer 3-8121-4038 Diesel Engine Oil, 15W-40 3-14121-4042 Transmission/Drive Train Oil, 30 3-17121-4043 Transmission/Drive Train Oil, 50 3-17121-4044 Hydraulic Oil, 10W 3-19121-9777 Cutout Wire 3-8121-9778 Cutout Knife 3-8121-9779 Replacement Blades

for Cutout Knife 3-8121-9780 Handles for Cutout Wire 3-8121-9781 Heavy Duty Caulking Gun 3-8121-9782 Suction Cup Holder 3-8122-6627 Hydraulic Oil, 30 3-19123-3104 Transmission/Drive Train Oil, 10W 3-17123-4077 Diesel Engine Oil, 15W-40 3-14124-0662 Tapered Impact Socket,

12 point, 3/4 in Drive 1-19125-5723 Socket Wrench Assembly 1-43126-2700 Multi-Purpose Tractor Oil, 10W-30 3-18127-1909 Yoke Pipe Vise 22--5588127-2277 Open End Wrench 1-25127-2278 Open End Wrench 1-25127-2279 Open End Wrench 1-8, 1-25127-2280 Open End Wrench 1-25

127-4966 Medium Gloss Dark Gray Paint, 12 oz Aerosol 3-38

127-4967 High Gloss Slate Gray Paint, 12 oz Aerosol 3-38

127-5453 Hydraulic Oil, 30 3-19127-5454 Hydraulic Oil, 30 3-19127-6421 Window Tool Kit 3-8127-6883 Sponge Brushes 3-8128-8824 Offset Wrench, Deep,

16 mm/18 mm 1-36128-8825 Offset Wrench, Deep,

17 mm/19 mm 1-36129-1063 Riveter Kit 11--5533129-1919 Multipurpose Grease, metal pail,

16 kg 3-21129-1921 Multipurpose Grease, tote, 1588 kg 3-21129-1924 Advanced 3Moly Grease,

Grade 2, metal pail, 16 kg 3-21129-1926 Advanced 3Moly Grease,

Grade 2, tote, 1588 kg 3-21129-1937 Desert Gold Grease, Grade 2,

cartridge, 450 g, Australia 3-22129-1938 Desert Gold Grease, Grade 2,

cartridge, 397 g 3-22129-1941 Desert Gold Grease, Grade 2,

plastic pail, 16 kg 3-22129-1942 Desert Gold Grease, Grade 2,

metal pail, 16 kg 3-22129-1943 Desert Gold Grease, Grade 2,

keg, 54 kg 3-22129-1944 Desert Gold Grease, Grade 2,

drum, 181 kg 3-22129-1946 Desert Gold Grease, Grade 2,

tote, 1588 kg 3-22129-1950 Multipurpose Grease,

cartridge, 450 g, Australia 3-21129-1952 Advanced 3Moly Grease, Grade 2,

cartridge, 450 g, Australia 3-21129-1966 White Assembly Grease,

Grade 2, cartridge, 397 g 3-22129-1968 White Assembly Grease,

Grade 2, aerosol, 13 oz 3-22129-1969 White Assembly Grease,

Grade 2, plastic pail, 16 kg 3-22129-2151 Antifreeze 3-12129-4552 Socket 1-31129-4553 Hex Bit 1-31129-8708 Arctic Platinum Grease,

Grade 0, plastic pail, 16 kg 3-22129-8709 Arctic Platinum Grease,

Grade 0, keg, 54 kg 3-22129-8710 Arctic Platinum Grease,

Grade 0, drum, 181 kg 3-22130-7055 Diesel Engine Oil, 10W-30 3-14130-8414 Ether Cylinder 3-34132-8112 Hydraulic Torque Wrench

3/4 in Sq. Drive 1-64132-8119 Hydraulic Torque Wrench

1 in Sq. Drive 1-64132-8125 Seal Kit for Square Drive

Hydraulic Wrenches 1-64132-8126 Hydraulic Torque Wrench

1 1/2 in Sq. Drive 1-64132-8132 Seal Kit for Square Drive

Hydraulic Wrenches 1-64132-8133 Hydraulic Torque Wrench

1 1/2 in Sq. Drive 1-64132-8139 Seal Kit for Square Drive

Hydraulic Wrenches 1-64132-8142 Hydraulic Wrench Swivel Seal Kit 1-63132-8143 36 mm Low Clearance Hex Link

(1,670 max ft lbs) 1-63132-8144 55 mm Low Clearance Hex Link

(1,670 max ft lbs) 1-63132-8154 3/4 in Drive Link (1,360 max ft lbs) 1-63132-8159 Hydraulic Torque Wrench,

Low Clearance 1-63

132-8160 Reaction Arm for Hydraulic Wrenches 1-63

132-8166 Hydraulic Wrench Swivel Seal Kit 1-63132-8167 1 in Sq. Drive Link With Reaction

Arm (3,050 max ft lbs) 1-63132-8176 36 mm Low Clearance Hex Link



(3,750 max ft lbs) 1-63132-8183 Hydraulic Torque Wrench,

Low Clearance 1-63132-8184 Reaction Arm for Hydraulic

Wrench 1-63132-8189 Hydraulic Wrench Swivel Seal Kit 1-63132-8190 55 mm Low Clearance Hex Link



(7,500 max ft lbs) 1-63132-8201 1 1/2 in Square Drive Link

(6,250 max ft lbs) 1-63132-8223 Electric Hydraulic Pump, 115 VAC 1-65132-8231 Electric Hydraulic Pump, 230 VAC 1-65132-8232 Air Hydraulic Pump 1-65132-8743 Socket, 65 mm (2 9/16 in) 1-19, 1-34133-8877 Field Tool Group 11--55133-9643 Gear Oil, 85W-140 3-19133-9644 Gear Oil, 85W-140 3-19135-3189 Multi-Purpose Tractor Oil, 10W-30 3-18136-1452 Pliers 1-52136-5189 Socket, 55 mm (3.56 in) 1-34136-5190 Socket, 70 mm (2 3/4 in) 1-19, 1-34136-9642 Governor Oil 3-32137-4370 Leveling Assembly 11--8888138-3852 Clean Walk Mats (18" x 36") 2-110138-3855 Clean Walk Mats (18" x 45") 2-110138-3856 Clean Walk Mats (24" x 45") 2-110138-4271 Multi-Purpose Tractor Oil, 10W-30 3-18138-4523 1" Bristle Disc - 50 Grit 2-11138-4524 1" Bristle Disc - 80 Grit 2-11138-4528 2" Bristle Disc - 50 Grit 2-11138-4529 2" Bristle Disc - 80 Grit 2-11138-4530 2" Bristle Disc - 120 Grit 2-11138-4534 2" Bristle Disc - 50 Grit 2-11138-4535 3" Bristle Disc - 80 Grit 2-11138-4536 3" Bristle Disc - 120 Grit 2-11138-7573 Link Brackets, (3/8 in) 1-88138-7574 Link Brackets, (3/4 in) 1-88138-7575 Link Brackets, 1/2 in 1-88138-7576 Link Brackets, 30 mm (1 1/4 in) 1-88138-8436 Liquid Gasket 3-6139-2398 Tire Mounting Lubricant 33--3300139-2645 Safety Glasses-Black Std Frame

(Clear Tint) 1-3, 2-87139-2648 Safety Glasses-Black Std Frame

(Gray Tint) 2-87139-2650 Safety Glasses-Yellow/ Black

Std Frame (Mirror Gray Tint) 2-87139-2651 Safety Glasses-Black

Std Frame (Mirror Gray Tint) 2-87139-2670 Replacement Lens

Std Frame (Clear Tint) 2-87139-2671 Replacement Lens

Std Frame (Gray Tint) 2-87139-2672 Replacement Lens

Std Frame (Mirror Gray Tint) 2-87139-2788 Crimping Tool, 24-12 AWG 2-76139-2789 Crimping Tool, 10-6 AWG 2-76140-2576 Matterhorn White Paint,

High Gloss, 12 oz Aerosol 3-38140-2577 Matterhorn White Paint,

High Gloss, 1 gal 3-39140-2578 Matterhorn White Paint,

High Gloss, 5 gal 3-39

part no.qxd 9/20/06 11:08 AM Page 1

Part Number Index


140-7738 Fabric Sling, 2.4M x 100 mm (8 ft x 4 in) 1-89

140-7741 Fabric Sling, 2.4M x 75 mm (8 ft x 3 in) 1-89

140-7742 Protective Sleeve, 600 mm x 250 mm (24 in x 10 in) 1-89

140-8780 Hex Bit, 24 mm 1-31140-9921 Threaded Insert 2-43141-0288 Fabric Sling,

2.4 M x 100 mm (8 ft x 4 in) 1-89141-0289 Fabric Sling,

2.4 M x 75 mm (8 ft x 3 in) 1-89141-1655 Inspection Light 22--6688141-3341 Diesel Engine Oil,

Synthetic, 55 gal 3-15141-5830 RTV Silicone Adhesive Sealant,

Black 3-5141-5831 RTV Silicone Adhesive Sealant,

Blue 3-5141-6993 Heavy Duty Angle Grinder 2-12, 2-13141-7250 Installation Tool 2-43142-1417 Diesel Engine Oil, Synthetic 3-15143-3655 Oil Stabilizer 3-32143-8695 Shackle (Synthetic Sling Saver) 1-89143-8698 Shackle Spool

(Synthetic Sling Saver) 1-89143-8699 Shackle Link Plate 1-89143-9508 Scotchweld dp-110 Adhesive 33--55143-9509 Nozzle Mixer 33--55143-9510 Applicator 33--55143-9511 Plunger Replacement 33--55144-3393 Orange Hand Wipes, 72 Count 3-36144-3394 Orange Hand Wipes, 250 Count 3-36144-4674 Field Service Tool Group 11--66144-7779 Rubber Belt Repair Kit 3-2144-7783 Belzona Conditioner 2911 3-2145-0995 Transmission/Drive Train Oil, 10W 3-17146-2728 Flex Pickup Tool 1-3, 1-54147-6456 Wedge Removal Tool 22--7777148-3539 Diesel Engine Oil, 10W-30 3-14148-5675 Case 1-85148-5677 Block 1-85150-1197 Surface Disc 2-10150-1244 Surface Disc 2-10150-1246 Surface Disc 2-10150-1248 Surface Disc 2-10150-1250 Surface Disc 2-10150-1251 Surface Disc 2-10150-1252 Surface Disc 2-10150-1578 First Aid Kit 2-78150-1579 First Aid Kit 2-78150-5431 Pad Cut Down Disc 2-11, 2-13151-0968 Cordless Heavy-Duty Variable

Speed Drill, 3/8 in 11--7755151-1340 Dielectric Tune Up Grease 3-28151-8101 1" Bristle Disc - 120 Grit 2-11151-8102 Holder for 1" Bristle Disc 2-11152-1058 Head Bolt Socket 1-33152-4942 Service Tool Field Group 11--77152-7997 Plastic Divided Utility w/

Hinged Lid Box 1-86152-9155 Cyanoacrylate Adhesive, Black 3-4153-5656 Automotive Battery 2-65153-5660 Automotive Battery 2-65153-5700 4D Battery 2-64153-5710 4D Battery 2-64153-5720 8D Battery 2-64153-8537 A/C Flusher 3-29153-8538 A/C Solvent 3-29153-9155 Cyanoacrylate Adhesive, black 3-4154-0192 Transmission/Drive Train Oil,

TMS, Multi-Viscosity 3-17154-0193 Transmission/Drive Train Oil,

TMS, Multi-Viscosity 3-17154-0194 Transmission/Drive Train Oil,

TMS, Multi-Viscosity 3-17

154-0195 Transmission/Drive Train Oil, TMS, multi viscosity 3-17

154-0196 Transmission/Drive Train Oil, TMS, Multi-Viscosity 3-17

154-0197 Transmission/Drive Train Oil, TMS, Multi-Viscosity 3-17

154-6564 Mud Flap 2-112154-8874 High Vibration Adhesive 3-1154-9315 Thread Restoring Files 22--3344154-9316 Metric Thread File 2-34154-9317 Inch Thread File 2-34154-9318 Inch Thread File 2-34154-9319 Pipe Thread File 2-34154-9731 High Strength Thread Lock 3-3155-0695 High Strength Thread Lock 3-3155-3046 Metric Hex Ball Drivers 1-31155-3595 Adapter 2-7, 2-10155-6198 Diesel Engine Oil, 10W-30 3-14155-6199 Diesel Engine Oil, 15W-40 3-14155-6200 Diesel Engine Oil, Synthetic 3-15155-6201 Diesel Engine Oil, 30 3-14155-6202 Diesel Engine Oil, 40 3-14155-6212 Transmission/Drive Train Oil, 10W 3-17155-6213 Transmission/Drive Train Oil, 30 3-17155-6214 Transmission/Drive Train Oil, 50 3-17155-6216 Hydraulic Oil, 10W 3-19155-6218 Multi-Purpose Tractor Oil, 10W-30 3-18155-6220 Gear Oil, 80W-90 3-19155-6222 Gear Oil, Synthetic, 75W-90 3-20156-0927 Jet Guard Safety Air Gun 1-74156-0930 Long John Safety Air Gun, 24" 1-73156-0931 Long John Safety Air Gun, 36" 1-73156-0932 Long John Safety Air Gun, 48" 1-73156-2568 Torque Adapter 1-59156-2649 Antifreeze/Coolant 3-12156-2653 Extended Life Coolant, Bulk 3-12156-2732 Roughing Brush

for Track Belt Repair 3-2156-2733 Roughing Brush Refill Teeth 3-2156-8166 Metric Tap 2-35, 2-42157-0674 Hand Tool Group 11--77157-2264 48" Long Handle Round

Point Shovel 1-49157-2266 27" D-Handle Round Point Shovel 1-49157-2268 48" Long Handle Square

Point Shovel 1-49157-2269 27" D-Handle Square Point Shovel 1-49157-2273 #12 Aluminum Scoop 1-49157-2276 48" Long Handle Drain Spade 1-49157-2278 27 in 1-49157-7228 Cyanoacrylate Adhesive, Clear 3-4158-8723 Socket Extension 18.74 in 1-21159-2833 Hex Socket, 55 mm (Spline Drive) 11--3344159-3327 Hex Wrench 1-41159-5155 300' Absorbent Rug 2-108159-5160 Sorbent Rug 100' w/ poly backing 2-108159-8156 Natural Gas Engine Oil, 40 3-16160-0772 Longneck Wire Brush 11--5555160-0774 Corner Cleaner Wire Brush 11--5555160-0775 Industrial Wire Scrubber 11--5555160-1749 Roll-up Pouch 2-34160-6389 Ratchet Head,

Reversible, 3/4" 1-1, 1-8, 1-14, 1-21160-6390 Repair Kit 1-14, 1-21, 1-58161-0970 Ultra 5Moly Grease,

Grade 1, keg, 54 kg 3-21161-0971 Ultra 5Moly Grease,

Grade 1, drum, 181 kg 3-21161-3983 Ratchet Head 1-15, 1-21161-3985 Repair Kit 1-15, 1-21161-5346 Shackle 1-8161-5347 Link- 1-8161-8953 Hex Wrench, 6 mm 1-8161-8954 File 1-8161-8955 File Handle 1-8161-8956 Cleaning Hook 1-8161-8958 Pump Wrench Assembly 1-8

161-9203 Ultra 5Moly Grease, Grade 1, cartridge, 397 g 3-21

162-5791 Shop Towel, 12.1 x 16.8 in 22--110077162-7804 Screwdriver Set 11--4455162-8716 Ratchet Head Handle 1-1, 1-7,

1-8, 1-14, 1-21162-8718 Detach Ratchet 1-58162-8873 Probe, Holder 2-112163-0798 First Aid Kit 25 Person 2-79163-0799 First Aid Kit - 50 Person 2-79163-4468 Hose Assembly 1-8163-6455 Link Brackets, 36 mm 1-88164-3171 Spanner Wrench 1-8164-5047 Tool Chain 1-8165-3945 Bristle Disc 2-12165-3946 Bristle Disc 2-12165-3947 Bristle Disc 2-12165-3977 Radius Punch, 154 mm 1-53166-0393 Transmission/Drive Train Oil, 10W 3-17166-1358 Polycarbonate Primer 3-8166-1359 ABS Primer 3-8166-3491 Natural Gas Engine Oil, 40 3-16168-0383 Breaker Bar

1/2 inch drive 1-1, 1-3, 1-12, 1-20168-7955 Impact Socket - Standard length 1-19168-8395 Metric Hex Driver, 3/4 in 1-31169-0503 Seal Installation Kit 33--99169-0782 Replacement Bit 1-31169-5418 Seal Lubricant (1 gal) 3-9169-5420 Seal Cleaner (1 gal) 3-9169-5464 Quick Cure Primer 3-1, 3-5169-7372 Clear Bottle 2-112, 2-113, 2-114169-7373 Bottle Assembly 2-112, 2-113, 2-114169-8373 Bottle Group 2-112, 2-113, 2-114170-8604 Sorbent Spill Kit - 5 gal 2-101170-8605 Sorbent Spill Kit, 31 gal 2-101172-0852 Poly Creeper 22--111111172-6894 Multi-Purpose Tractor Oil, 10W-30 3-18173-0531 Sealant Repair Kit 3-1173-1941 Hard Hat 2-89173-1942 Hard Hat 2-89173-4060 Charcoal Gray Paint, 12 oz Aerosol 3-38174-6854 Cat Cabinet & Tank Liquid

for Pressure Washers 3-10174-6855 Cat Cabinet and Tank Liquid

for Pressure Washers 3-10174-6856 Cat Cabinet and Tank Powder 3-10174-6857 Cat Cabinet and Tank Powder 3-10174-6858 Cat Pressure Wash 3-10174-6859 Cat Pressure Wash 3-10174-6860 Cat GP Wash 3-11174-6861 Cat GP Wash 3-11174-6885 Cat Citra Soap 3-11174-8900 Cut-Off Wheel, A60 2-20174-8901 Cut-Off Wheel, A60 2-20174-8902 Cut-Off Wheel, A36 2-20174-8903 Cut-Off Wheel, A36 2-20174-8904 Cut-Off Wheel, A36 2-20174-8905 Cutting Wheel, A36 2-20174-8906 Cut-Off Wheel, A60 2-20174-8907 Cut-Off Wheel, A60 2-20174-8908 Cut-Off Wheel, A36 2-20174-8909 Cut-Off Wheel, A36 2-20174-8910 Cut-Off Wheel, A36 2-20174-8911 Cut-Off Wheel, A36 2-20174-9696 Internal Slotted Final Drive

Spanner Wrench 11--4400174-9802 Six-Drawer Tool Chest, Black 11--8822174-9803 Lock 11--8822175-2934 Activator, 250 ml Tube 3-8175-2935 Fast Cure Window Adhesive

& Booster 10.5 oz Tube 3-8175-2936 Heating Oven 3-8175-4280 Automotive Battery 2-65175-4360 Racing Battery

for Off-Highway Vehicles 2-65



Part Number Index

175-4370 Racing Batteries for Off-Highway Vehicles 2-65

175-4390 Racing Batteries for Off-Highway Vehicles 2-65

175-6797 Impact Socket - 36 mm Deep 1-33175-7546 Cutter Group 1-8, 11--4400175-7940 Hydraulic Wrench, 1 1/2 in 1-64175-7941 Hydraulic Wrench, 1 1/2 in 1-64175-7944 Electric Hydraulic Pump, 115 VAC 1-65175-7945 Manual Hydraulic Pump 1-65175-9412 Electric Hydraulic Pump, 230 VAC 1-65176-1691 Fastener 2-43176-2934 Drive Assembly 1-60177-0364 Cutter Group Roller 1-40177-0365 Cutter Group Cutting Wheel 1-40177-0366 Cutter Group Spacer 1-40177-0367 Cutter Group Pin 1-40177-7860 Hose Assembly 1-8177-9343 Cap and Probe Group 2-112, 2-113, 2-114178-1628 Fastener 2-43178-2207 Hardware Shop/Field Kit,

476 pieces 2-128178-2208 Hardware Shop/Field Kit,




630 pieces 2-128178-2212 Case 11--8855178-2213 Dividers for Storage Case 11--8855178-7635 Installation Tool 2-43179-3571 Installation Tool 2-43179-7043 Ratchet Work Light 22--7722179-7044 Bulb 2-72179-7045 Lens 2-72179-7046 Reel with Angle Light 22--7722179-7047 Angle Light 22--7722179-7048 Lens 2-72179-7049 Bulb 2-72, 2-73179-7050 Magnet, Velcro 2-72179-7053 Extension Cord Triple Tap 22--7733179-7054 Light Rover 22--7733179-7055 Tube Assembly 2-73179-7056 Work Light 22--7733179-7057 Lens 2-73179-7058 Bulb 2-73183-3424 Ultra 5Moly Grease, Grade 2,

cartridge, 397 g 3-21183-3425 Ultra 5Moly Grease, Grade 2,

cartridge, 450 g, Australia 3-21183-3426 Ultra 5Moly Grease, Grade 2,

plastic pail, 16 kg 3-21183-3427 Ultra 5Moly Grease, Grade 2,

keg, 54 kg 3-21183-3428 Ultra 5Moly Grease, Grade 2,

drum, 181 kg 3-21183-3429 Ultra 5Moly Grease, Grade 2,

tote, 1588 kg 3-21183-3432 Ultra 5Moly Grease, Grade 1,

plastic pail, 16 kg 3-21184-6020 Final Drive/Axle Oil, 60 3-18184-6021 Final Drive/Axle Oil, 60 3-18184-6022 Final Drive/Axle Oil, 60 3-18184-8054 Final Drive/Axle Oil, 60 3-18184-8055 Final Drive/Axle Oil, 60 3-18184-8056 Final Drive/Axle Oil, 60 3-18185-0143 Cape (Large) 22--8844185-0144 Cape (Extra Large) 22--8844185-0150 Bib, 22 in x 22 in 22--8844185-0151 Welding Coat (Large) 22--8844185-0152 Welding Coat (Extra Large) 22--8844185-0153 Leather Welding Gloves, Med,

Bulk-12 Pair 22--8844, 2-94185-0783 Cat Backhoe Loader Axle/Brake

Oil Additive 3-20

185-3630 Filter Strap Wrench 1-4, 1-5, 1-6, 1-7, 1-8,1-9, 11--4400, 1-54

185-3983 Flexible Gasket Maker 3-6185-3984 Flexible Gasket Maker 3-6185-3985 Gasket Maker 3-6185-3986 RTV Silicone

Adhesive/Sealant, Black 3-7185-3987 RTV Silicone

Adhesive/Sealant, Blue 3-7185-3988 Retaining Compound 3-1, 3-3185-3989 Thread Lubricant 3-27185-3990 Brush-top Can 3-27185-3992 Pipe Sealant with Teflon 3-1, 3-5185-3994 Bearing Mount 3-1, 3-3185-3996 Thread Lock 3-1, 3-3185-3998 High Strength Thread Lock 3-3185-4000 Orange Hand Cleaner, Smooth 3-35185-4001 Orange Hand Cleaner with pumice 3-35185-4002 Dielectric Tune-Up Grease 3-28185-4003 DEPEND No-Mix Adhesive Kits 3-1185-4004 Quick Cure Primer 3-1, 3-5185-4005 Sealant Repair Kit, (EAME only) 3-1185-4590 Liquid Gasket 3-6185-4591 Cement - Bond, Seal, Patch 3-4185-4592 Cat Cabinet & Tank Liquid for

Pressure Washers 3-10185-4593 Cat Cabinet and Tank Liquid for

Pressure Washers 3-10185-4595 Cat Cabinet and Tank Powder 3-10185-4596 Cat Cabinet and Tank Powder 3-10185-4597 Cat Pressure Wash Detergent,

5 gal 3-10185-4598 Cat Pressure Wash Detergent,

55 gal 3-10185-4600 Cat GP Wash, 5 gal 3-11185-4601 Cat GP Wash, 55 gal 3-11185-4604 Cat Citra Soap, 5 gal 3-11185-4612 Hydrosolv 4110, Heavy-Duty

Cleaner, 5 gal 3-10185-4615 Hydrosolv 4110, Heavy-Duty

Cleaner, 55 gal 3-10185-4619 Cat HD Pressure Wash, Alkaline

Cleaner, 5 gal 3-10185-4623 Hydrosolv Defoamant, DK100

Additive, 1 gal 3-10185-4630 Cooling System Cleaner,

Quick Flush, 3.79 L 3-13185-4663 Brake Fluid, 1 gal, DOT 3,

(EAME only) 3-33185-4664 Brake Fluid, 1 gal, DOT 5,

(EAME only) 3-33185-4665 Calibration Fluid, 5 gal,

(EAME only) 3-33185-4756 Mineral Spirits 3-25185-4757 Mineral Spirits, 55 gal 3-25185-4758 Silicone Turbo Grease 3-27185-4759 Compactor Oil 3-31185-4769 V.C.I Oil, 1 qt (EAME only) 3-30185-4770 V.C.I Oil, 5 gal (EAME only) 3-30185-4771 Hydraulic Oil Additive and

Supplement, (EAME only) 3-32185-4772 Vacuum Pump Oil 3-29185-4774 Oil Stabilizer, (EAME only) 3-32185-4775 Governor Oil, (EAME only) 3-32185-4776 O-ring Compound, 8 fl oz

(EAME only) 3-31185-4777 O-ring Compound, 1 gal,

(EAME only) 3-31185-4779 Leak Detection Oil Dyes 3-23185-4781 Leak Detection Oil Dyes 3-23185-5121 Cooling System Cleaner, Standard 3-13185-5123 Cat 4A Rust Preventive Oil,

55 gal, (EAME only) 3-31185-5125 Caterpillar 119 Cutting Oil 3-30185-5126 Caterpillar 250 Grinding Fluid 3-30185-5127 Oil, 450 Rust Preventive, Cat, 1 gal,

(EAME only) 3-31

185-5131 A/C Refrigerent Flushing Solvent,(EAME Only) 3-29

185-5141 POE Oil, (EAME only) 3-28185-5155 PAG Oil (EAME only) 3-28185-5156 Cat Lapping Compound, 1 gal 3-31186-1527 RTV Adhesive/Sealant, White,

3 fl oz 3-7186-1528 Silicone Lubricant 3-28186-1529 Heat Sink Compound, 5 oz 3-27186-1530 High Vacuum Grease, tube 3-28186-1531 Molybdenum Paste 3-27187-2718 Filter Wrench 11--4400187-4851 Ether Cylinder, 18 oz-3" diameter,

(EAME only) 3-34187-4852 Ether Cylinder, 21 oz-4" diameter,

(EAME only) 3-34187-4856 Window Adhesive 3-8187-4857 Fast Cure Window Adhesive

& Booster 10.5 oz Tube 3-8187-4858 Window Primer 3-8187-4862 ABS Primer 3-8187-4864 Activator, 250 ml Tube 3-8188-2095 Tool Chest, Six-Drawer, Orange 11--8822188-2143 Vise 2-56188-2145 5 1/2 in Vice Replacement Part 2-56188-2147 6 1/2 in Vise Replacement Parts 2-56188-2163 8" Vise 2-56188-2165 Replacement Vise Jaw Insert Kit 2-56188-2167 Vise Replacement Jaw Insert Kit 2-56188-2170 Vise Replacement Jaw Insert Kit 2-56188-2171 Vise Replacement Jaw Insert Kit 2-56188-2752 Replacement Pipe Jaw Insert 2-56189-3628 Flood Light 22--7700189-3658 Replacement Halogen Flood

Sealed Beam 2-70189-6296 Brake Cleaner Low VOC 3-8189-8653 Polycarbonate Primer 3-8189-8679 General Purpose Cleaner 3-8190-1668 Coupler 1-56190-1669 Hose Assembly, 12 in Long 1-56190-1670 Coupler 1-56190-5622 Pistol Grip Grease Gun 11--5566190-5623 Hose Assembly, 18 in Long 1-56190-8487 Vacuum Pump Oil 1 liter 33--2299190-9792 Duct Tape 22--111188191-6310 Hand Cleaner - 15 oz Orange 3-36191-6311 Hand Cleaner - 128 oz. Orange 3-36193-0071 Particulate Respirator 22--8811193-0766 Particulate Respirator 22--8811193-0768 Maintenance Absorbent

Pillow, 20 x 81.5 in 2-98, 2-103194-3480 Socket, 8 mm 1-26, 1-32194-3483 Socket, 9 mm 1-26, 1-32194-3488 Socket, 10 mm 1-26, 1-32194-3490 Socket, 11 mm 1-26, 1-32194-3492 Socket, 12 mm 1-26, 1-32194-3494 Socket, 13 mm 1-26, 1-32194-3495 Socket, 14 mm 1-26, 1-32194-3496 Socket, 15 mm 1-26, 1-32194-3497 Socket, 16 mm 1-26, 1-32194-3498 Socket, 17 mm 1-26, 1-32194-3499 Socket, 18 mm 1-26, 1-32194-3500 Socket, 19 mm 1-26, 1-32194-3505 Socket, 16 mm 1-29, 1-33194-3506 Socket, 17 mm 1-29, 1-33194-3510 Socket, 18 mm 1-29, 1-33194-3511 Socket, 19 mm 1-29, 1-33194-3512 Socket, 20 mm 1-29, 1-33194-3513 Socket, 21 mm 1-29, 1-33194-3514 Socket, 22 mm 1-29, 1-33194-3515 Socket, 24 mm 1-29, 1-33194-3516 Socket, 25 mm 1-29, 1-33194-3517 Socket, 26 mm 1-29, 1-33194-3518 Socket, 6 mm 1-26, 1-32194-3519 Socket, 7 mm 1-26, 1-32194-3521 Socket, 8 mm 1-26, 1-32194-3522 Socket, 9 mm 1-26, 1-32


Part Number Index


194-3523 Socket, 10 mm 1-26, 1-32194-3527 Socket, 11 mm 1-26, 1-32194-3528 Socket, 12 mm 1-26, 1-32194-3529 Socket, 13 mm 1-26, 1-32194-3530 Socket, 14 mm 1-26, 1-32194-3531 TORXALIGN Bit, T10, 1/4 1-16194-3532 TORXALIGN Bit, T15, 1/4 1-16194-3533 TORXALIGN Bit, T20, 1/4 1-16194-3534 TORXALIGN Bit, T25, 1/4 1-16194-3535 TORXALIGN Bit, T30, 3/8 1-6, 1-16194-3536 TORXALIGN Bit, T40, 3/8 1-16194-3537 TORXALIGN Bit, T45, 3/8 1-16194-3538 TORXALIGN Bit, T50, 3/8 1-6, 1-16194-3539 TORXALIGN Bit, T55, 3/8 1-16194-3540 1/4 in Sq. Drive Torx Socket 1-16194-3541 Hex Driver, 4 mm (3/8 in) Drive 1-31194-3542 Hex Driver, 5 mm (3/8 in) Drive 1-31194-3543 Hex Driver, 6 mm (3/8 in) Drive 1-31194-3544 Hex Driver, 7 mm (3/8 in) 1-31194-3545 Driver, Hex, 8 mm, 3/8 1-31194-3546 Driver, Hex, 10 mm, 3/8" Drive 1-31194-3547 Driver, Hex, 12 mm, 1/2" Drive 1-31194-3548 Driver, Hex, 14 mm, 1/2" Drive 1-31194-3549 Driver, Hex, 17 mm, 1/2" Drive 1-31194-3552 Hacksaw 1-45194-3553 Rolling Head Pry Bar,

304.8 mm (12 in) 1-46194-3556 Rolling Head Pry Bar,

533.4 mm (21 in) 1-46194-3558 Standard Length Sockets,

1/2 in Drive, 12 Pt., 25 mm 1-33194-3559 Standard Length Sockets,

1/2 in Drive, 12 Pt., 26 mm 1-33194-3560 Grease Gun Group with 1 battery 11--5577194-3561 Rechargeable Battery 11--5577194-3562 Standard Length Sockets,




1/2 in Drive, 12 Pt., 30 mm 1-6, 1-9, 1-33194-3566 Standard Length Sockets,


1/2 in Drive, 12 Pt., 32 mm 1-33194-3574 Socket Set, 12 Piece,

3/8 in Drive 1-3, 1-8, 11--2266194-3576 Socket Set, 10 Piece 1-3, 11--2299194-3578 Socket Set, 9 Piece,

1/4 in Drive 1-3, 11--2266194-3584 TORXr Driver Set, 10 Piece 1-3, 11--1166194-3585 Metric Hex Driver Set,

9 Piece 1-3, 1-8, 11--3311194-4944 Ratchet, 1/2 in Drive 1-20194-7582 Pneumatic Wrench 1-62194-7586 Pneumatic Wrench Group 1-62194-7589 Wrench Group Pneumatic 1-62194-7590 Wrench Group Pneumatic 1-62194-7591 Regulator Group 1-62194-7605 Reaction Arm 1-62194-7607 Snap Ring Kit 1-62194-7608 Snap Ring Kit 1-62194-7609 Hose Assembly 1-62194-7610 Cage Assembly 1-62194-7611 Filter Assembly 1-62194-7612 Gauge Pressure 1-62195-3500 Wrench Assembly 1-62195-3501 Wrench Assembly 1-62195-4609 Hydraulic Cylinder Seal Pick 11--5544195-7592 Reaction Arm 1-62197-0017 Cat Backhoe Loader Axle/Brake

Oil Additive 3-20197-1877 Service Group (Forwarder) 1-8197-1880 Service Group (Tree Harvester) 1-8197-3672 Saw Adjustment Wrench 1-8, 11--3377

197-5088 Service Group (Harvester Head) 1-8197-6911 Natural Gas Engine Oil, 40 3-16197-9227 Ultra 5Moly Grease, Grade 1,

cartridge, 450 g, Australia 3-21198-7450 Final Drive/Axle Oil, Synthetic

Multi-Viscosity 3-18198-7672 Final Drive/Axle Oil, 60 3-18198-9142 Plastigage, Green 1-53198-9143 Plastigage, Red 1-53198-9144 Plastigage, Green 1-53198-9145 Plastigage, Yellow 1-53199-3947 Hand Tap, Fractional Size Taper

for Reconditioning 2-32199-6149 Standard Length Sockets,

1/2 in Drive, 12 Pt., 12 mm 1-29, 1-33199-6150 Standard Length Sockets,




1/2 in Drive, 12 Pt., 24 mm 1-6, 1-7, 1-9,1-29, 1-33

199-6156 Metric Socket Set, 13 Piece, 1/2 in Drive 1-3, 11--2299

199-9019 Socket Set, 12 Piece, 1-3, 11--2266199-9023 Deep Length Sockets,

3/8 in Drive, 12 Pt., 8 mm 1-26, 1-32199-9025 Deep Length Sockets,











3/8 in Drive, 12 Pt., 19 mm 1-26, 1-32199-9199 Socket Assembly 1-16200-1928 Hex Key Wrench Group,

1/16 in-3/8 in 1-3, 11--4422200-1929 Hex Key Wrench Group,

1.5 mm-10 mm 1-3, 1-8, 1-9, 11--4422200-1931 Hex Bit Set, 1.5 mm-6 mm 1-3, 11--4422200-6319 Portable Charger, 110 V, 60 Hz 22--6611200-8413 Socket Set, 13 Piece,

1/4 in Drive 1-3, 11--2266200-8415 Standard Length Sockets,



1/4 in Drive, 6 Pt., 5.5 mm 1-26, 1-32, 1-34200-8419 Standard Length Sockets,





1/4 in Drive, 6 Pt., 10 mm 1-26, 1-32, 1-34

200-8424 Standard Length Sockets, 1/4 in Drive, 6 Pt., 11 mm 1-26, 1-32, 1-34





201-0775 Diesel Engine Oil, 15W-40 3-14201-0776 Hydraulic Oil, 10W 3-19201-0777 Transmission/Drive Train Oil, 30 3-17201-9855 Final Drive/Axle Oil, 60 3-18202-8643 Plastic Tool Box, water-tight 1-84202-9753 Final Drive/Axle Oil, 60 3-18203-1044 Diesel Engine Oil, 40 3-14203-5431 Stacking Socket (female 1 5/16,

male 36 mm) 1-34203-5432 Stacking Socket (female 1 1/2,

male 36 mm) 1-34203-5433 Stacking Socket (female 36 mm,



male 46 mm) 1-34204-7932 Stud Installer, M16 x 20 2-47204-7933 Stud Installer, M20 x 2.5 2-47204-7934 Stud Installer, M24 x 3.0 2-47204-7935 Stud Instaler, M30 x 3.5 2-47204-7936 Stud Installer, M36 x 3.0 2-47205-4312 Gear Oil, 85W-140 3-19205-5688 Load Positioner Warning Tag 1-88205-6611 Extended Life Coolant 3-12205-6612 Extended Life Coolant 3-12205-6613 Extended Life Coolant 3-12205-6614 Extended Life Coolant 3-12205-6615 Extended Life Coolant 3-12205-8857 High Temperature Adhesive

Sealant, Red 3-7205-8858 RTV Silicone Adhesive/Sealant,

Clear 3-7206-1990 PAG Oil (EAME only) 3-28206-4496 Installation Tool, M4x0.7 2-43206-4499 Tool Installation, M6x1 2-43206-5210 Final Drive/Axle Oil, 60 3-18206-5211 Final Drive/Axle Oil, Synthetic

Multi-Viscosity 3-18206-5212 Final Drive/Axle Oil, Synthetic

Multi-Viscosity 3-18206-6417 Highway Yellow Paint,

High Gloss, 12 oz Aerosol 3-38206-7047 Threaded Insert 2-43206-7048 Threaded Insert 2-43206-7831 Extended Life Coolant 3-12206-8796 Torque Multimeter 11--6600207-1515 Hand Tool Set 11--99207-1600 P-80 Assembly Lubricant, .95 l (1qt) 3-30207-1601 P-80 Assembly Lubricant, .95 l (1qt) 3-30207-2736 Hose Assembly, 762 mm (30 in) 1-57207-7529 Caterpillar Manifold Sealer,

(EAME only) 3-34207-7530 Belzona 1111 Super Metal 3-2207-7531 Belzona 1311 Ceramic R Metal 3-2207-7532 Belzona 1221 Super E-Metal 3-2207-8155 Impact Socket, 46 mm, 6 Pt.,

1 1/2 in Drive 1-34207-8160 Extension, 1 in Drive 1-22208-2390 Final Drive/Axle Oil, Synthetic,

Multi-Viscosity 3-18208-6183 Hacksaw 1-3, 1-45209-0987 Plexus MA 300 3-5209-9239 Hand Tool Set 11--55209-9589 Halogen Replacement Bulb

(Brinkman) 2-67210-0786 Extended Life Coolant 3-12



Part Number Index

211-0136 Tool Bag 1-4, 1-5211-0616 Hand Tool Set 11--44211-0617 Hand Tool Set 11--44211-2679 Plexus MA 300 (EAME only) 3-5212-3607 End Cut Pliers 1-51212-7530 Hard Hat Attachment Bracket 22--9900212-8144 Face Slotted Spanner Wrench 1-4,

1-5, 1-7212-8145 Drain Plug Socket 1-4, 1-5, 1-7, 1-54212-8146 Drain Plug Socket 1-54213-1983 Combination Pliers 1-4, 1-5, 1-51213-1985 Sliding T-Handle 1-4, 1-5, 1-7, 1-22, 1-54213-3086 Standard Impact Socket Set,

11 Piece 11--1133213-3087 Socket, 1/2 in 1-13, 1-18213-3088 Socket, 9/16 in 1-5, 1-13, 1-18213-3089 Socket, 5/8 in 1-13, 1-18213-3091 Socket, 11/16 in 1-13, 1-18213-3094 Socket, 3/4 in 1-13, 1-18213-3099 Socket, 13/16 in 1-13, 1-18213-3102 Socket, 7/8 in 1-13, 1-18213-3104 Socket, 15/16 in 1-13, 1-18213-3107 Socket, 1 in 1-13, 1-18213-3109 Socket, 1 1/16 in 1-13, 1-18213-3110 Socket, 1 1/8 in 1-13, 1-18213-3515 Impact Socket Set, 12 Piece 11--1133213-3516 Socket, 7/16 in 1-13, 1-18213-3517 Socket, 1/2 in 1-13, 1-18213-3518 Socket, 9/16 in 1-13, 1-18213-3520 Socket, 5/8 in 1-13, 1-18213-3521 Socket, 11/16 in 1-13, 1-18213-3522 Socket, 3/4 in 1-13, 1-18213-3523 Socket, 13/16 in 1-13, 1-18213-3524 Socket, 7/8 in 1-13, 1-18213-3525 Socket, 15/16 in 1-13, 1-18213-3526 Socket, 1 in 1-13, 1-18213-3528 Socket, 1 1/16 in 1-13, 1-18213-3530 Socket, 1 1/8 in 1-13, 1-18213-4437 Adapter 1-9, 1-22213-4443 Socket Set, 17 Piece, 1/4 in 11--99213-6923 Impact Socket Set, 12 Piece, 1/2 in 11--2299213-6924 Impact Socket, 1/2 in Drive 1-29, 1-33213-6926 Impact Socket, 1/2 in Drive 1-5, 1-6, 1-9,

1-29, 1-33213-6927 Impact Socket, 1/2 in Drive 1-6, 1-9,

1-29, 1-33213-6928 Impact Socket, 1/2 in Drive 1-29, 1-33213-6929 Impact Socket, 1/2 in Drive 1-5, 1-6, 1-9,

1-29, 1-33213-6930 Impact Socket, 1/2 in Drive 1-29, 1-33213-6932 Impact Socket, 1/2 in Drive 1-29, 1-33213-6933 Impact Socket, 1/2 in Drive 1-5, 1-29,

1-33213-6934 Impact Socket, 1/2 in Drive 1-29, 1-33213-6935 Impact Socket, 1/2 in Drive 1-5, 1-29,

1-33213-6936 Impact Socket, 1/2 in Drive 1-5, 1-29,

1-33213-6937 Impact Socket, 1/2 in Drive 1-29, 1-33213-9965 Socket Set, 10 Piece,

1/4 in Drive 11--1100213-9967 Socket, 1/4 in Drive 1-10, 1-17213-9968 Socket, 1/4 in Drive 1-10, 1-17213-9969 Socket, 1/4 in Drive 1-10, 1-17213-9970 Socket, 1/4 in Drive 1-10, 1-17213-9971 Socket, 1/4 in Drive 1-10, 1-17213-9972 Socket, 1/4 in Drive 1-10, 1-17213-9974 Socket, 1/4 in Drive 1-10, 1-17213-9978 Socket, 1/4 in Drive 1-10, 1-17213-9980 Socket, 1/4 in Drive 1-10, 1-17213-9981 Socket, 1/4 in Drive 1-10, 1-17214-1143 Socket Set, 7 Piece,

3/8 in Drive 11--1100214-1144 Socket, 3/8 in Drive 1-10, 1-17214-1145 Socket, 3/8 in Drive 1-10, 1-17214-1146 Socket, 3/8 in Drive 1-10, 1-17214-1147 Socket, 3/8 in Drive 1-10, 1-17

214-1148 Socket, 3/8 in Drive 1-10, 1-17214-1149 Socket, 3/8 in Drive 1-10, 1-17214-1150 Socket, 3/8 in Drive 1-10, 1-17214-1151 Socket Set, 9 Piece,

3/8 in Drive 11--1111214-1152 Socket, 3/8 in Drive 1-11, 1-17214-1153 Socket, 3/8 in Drive 1-11, 1-17214-1154 Socket, 3/8 in Drive 1-11, 1-17214-1155 Socket, 3/8 in Drive 1-11, 1-17214-1156 Socket, 3/8 in Drive 1-11, 1-17214-1157 Socket, 3/8 in Drive 1-11, 1-17214-1158 Socket, 3/8 in Drive 1-11, 1-17214-1159 Socket, 3/8 in Drive 1-11, 1-17214-1160 Socket, 3/8 in Drive 1-11, 1-17214-1161 Socket Set, 11 Piece,

1/2 in Drive 11--1133214-1162 Socket, 1/2 in Drive 1-13, 1-18214-1163 Socket, 1/2 in Drive 1-13, 1-18214-1164 Socket, 1/2 in Drive 1-13, 1-18214-1165 Socket, 1/2 in Drive 1-13, 1-18214-1166 Socket, 1/2 in Drive 1-13, 1-18214-1167 Socket, 1/2 in Drive 1-13, 1-18214-1168 Socket, 1/2 in Drive 1-13, 1-18214-1169 Socket, 1/2 in Drive 1-13, 1-18214-1170 Socket, 1/2 in Drive 1-13, 1-18214-1171 Socket, 1/2 in Drive 1-13, 1-18214-1172 Socket, 1/2 in Drive 1-13, 1-18214-3634 Drill, 23 mm 2-30214-3635 Taper Pipe Taps 2-35214-4820 Extended Life Coolant, Australia 3-12214-4824 Extended Life Coolant, Australia 3-12214-6142 Hex Driver Set, 10 Piece 11--1155214-6144 Roller Cabinet, 30 in 1-80214-6145 Top Chest, 30 in 1-80, 1-81214-6146 Roller Cabinet and Top Chest,

30 in Combo 1-80214-6147 Roller Cabinet, 40 in 1-80, 1-81214-6148 Top Chest, 40 in 1-80, 1-81214-6149 Roller Cabinet and Top Chest,

40 in Combo 1-80214-6153 Hand Tool Group 11--55214-6490 Socket Set, 9 Piece,

3/8 in Drive 11--1111214-6491 Socket, 3/8 in Drive 1-11, 1-17214-6492 Socket, 3/8 in Drive 1-11, 1-17214-6493 Socket, 3/8 in Drive 1-11, 1-17214-6494 Socket, 3/8 in Drive 1-11, 1-17214-6495 Socket, 3/8 in Drive 1-11, 1-17214-6496 Socket, 3/8 in Drive 1-11, 1-17214-6497 Standard Length Sockets,

1/2 in Drive, 12 Point 1-18214-6498 Socket Set, 12 Piece, 1/2 in Drive 11--1122214-6500 Standard Length Sockets,

1/2 in Drive 1-12, 1-18214-6501 Standard Length Sockets,











1/2 in Drive 1-12, 1-18

214-6518 Universal Impact Socket Set, 5 Piece, 1/2 in Drive 11--1144

214-6521 Universal Impact Socket, 1/2 in Drive 1-14, 1-18





214-6553 Standard Length Impact Socket, 3/4 in Drive 1-18


















214-6599 Deep Length Impact Socket, 3/4 in Drive 1-19





214-6604 Deep Length Impact Socket, 3/4 in Drive, 6 Point, Black 1-19










Part Number Index


214-6614 Deep Length Impact Socket, 2 in, 6 Pt., 3/4 in Drive 1-19

214-6620 Socket Set, 12 Piece, 3/8 in Drive 11--2277

214-6621 Socket, 3/8 in Drive 1-27, 1-32214-6623 Socket 3/8 in Drive 1-27, 1-32214-6624 Socket, 3/8 in Drive 1-27, 1-32214-6625 Socket, 3/8 in Drive 1-27, 1-32214-6626 Socket, 3/8 in Drive 1-27, 1-32214-6627 Socket, 3/8 in Drive 1-27, 1-32214-6628 Socket, 3/8 in Drive 1-27, 1-32214-6629 Socket, 3/8 in Drive 1-27, 1-32214-6630 Socket, 3/8 in Drive 1-27, 1-32214-6631 Socket, 3/8 in Drive 1-27, 1-32214-6632 Socket, 3/8 in Drive 1-27, 1-32214-6633 Socket, 3/8 in Drive 1-27, 1-32214-6634 Socket Set, 8 Piece,

3/8 inch Drive 11--2277214-6635 Socket, 3/8 in Drive 1-27, 1-32214-6636 Socket, 3/8 in Drive 1-27, 1-32214-6637 Socket, 3/8 in Drive 1-27, 1-32214-6638 Socket, 3/8 in Drive 1-27, 1-32214-6639 Socket, 3/8 in Drive 1-27, 1-32214-6640 Socket, 3/8 in Drive 1-27, 1-32214-6641 Socket, 3/8 in Drive 1-27, 1-32214-6642 Socket, 3/8 in Drive 1-27, 1-32214-6643 Impact Socket Set, 11 Piece,

1/2 in Drive 11--3300214-6644 Impact Socket, 1/2 in Drive 1-30, 1-33214-6645 Impact Socket, 1/2 in Drive 1-30, 1-33214-6646 Impact Socket, 1/2 in Drive 1-30, 1-33214-6647 Impact Socket, 1/2 in Drive 1-30, 1-33214-6648 Impact Socket, 1/2 in Drive 1-30, 1-33214-6649 Impact Socket, 1/2 in Drive 1-30, 1-33214-6650 Impact Socket, 1/2 in Drive 1-30, 1-33214-6651 Impact Socket, 1/2 in Drive 1-30, 1-33214-6652 Impact Socket, 1/2 in Drive 1-30, 1-33214-6653 Impact Socket, 1/2 in Drive 1-30, 1-33214-7214 Individual Combination Wrench 1-35214-7215 Individual Combination Wrench 1-35214-7217 Individual Combination Wrench 1-35214-7218 Wrench, 27 mm 1-8, 1-35214-7219 Hand Tool Group 11--77214-7220 Individual Combination Wrench 1-35214-7222 Combination Wrench, 32.0 mm 1-6, 1-35214-7223 Combination Wrench, 36.0 mm 1-6, 1-8,

1-9, 1-35214-7314 Double End Flare Nut Wrench 1-41214-7315 Double End Flare Nut Wrench 1-41214-7316 Breaker Bar, 1/4 in Drive 1-20214-7317 Double End Flare Nut Wrench 1-41214-7318 Hand Tool Group 11--66214-7319 Sliding T-Handle 1-22214-7320 Hex Driver 1-15214-7321 Hex Bit 1-15214-7322 Adjustable Wrench 1-9, 1-39214-7323 Adjustable Wrench 1-39214-7324 Torxr Bit Set 1-8, 1-9214-7326 Breaker Bar, 1/2 in Drive 1-20214-7327 Hex Driver 1-15214-7328 Hex Driver 1-15214-7329 Wrench-Open End 1-6, 1-9, 11--3366214-7330 Combination Wrench,

1 5/16 jaw range 1-6, 1-8, 1-39214-7331 Hex Bit 1-15214-7332 Adjustable Wrench, 15.0 in 1-8, 1-39214-7333 Flex Head Ratchet, 1/2 in Drive 1-8, 1-20214-7335 Double End Flare Nut Wrench Set,

3 Piece 11--4411214-7339 Ratchet Repair Kit 1-20214-7340 Ratchet, Round Head,

287.3 mm (11.31 in) 1-20214-7341 Ratchet Repair Kit 1-20214-7342 Screwdriver, No. 3 Phillips tip 1-8, 1-45214-7344 Bulk Side Cabinet 1-80, 1-81214-7345 Six Drawer Side Cabinet 1-80, 1-81

214-7346 Impact Socket Set, 1/2 in Drive 1-30, 1-33

214-7347 Multiple Position Pliers 1-51214-7348 Multiple Position Pliers 1-51214-7349 Curved Jaw Vise Grip 1-58214-7350 Fixed Ratchet 1-58215-4241 Extended Life Coolant, Brazil 3-12215-4242 Extended Life Coolant,Brazil 3-12215-4244 Extended Life Coolant, Brazil 3-12215-4245 Extended Life Coolant, Brazil 3-12215-4246 Extended Life Coolant, Brazil 3-12215-4247 Antifreeze/Coolant, Brazil 3-12216-1685 Spark Plug Socket 11--4444216-9220 Natural Gas Engine Oil, Low Ash,

EL250, 30 3-16216-9221 Natural Gas Engine Oil, Low Ash,



EL250, 40 3-16217-0616 Coolant Additive 3-12217-0617 Coolant Additive 3-12217-0618 Coolant Additive 3-12217-1591 Straight Cap-Plastic 2-52219-3039 Extended Life Coolant, Brazil 3-12219-3040 Antifreeze/Coolant, Brazil 3-12219-3041 Antifreeze/Coolant, Brazil 3-12221-3445 Final Drive/Axle Oil, 60 3-18222-1534 Extended Life Coolant 3-12222-3048 Impact Wrench, 3/8 in 1-66, 1-67, 1-68222-3049 Impact Wrench, 3/8 in 1-66, 1-67, 1-68222-3050 Impact Wrench, 1/2 in 1-66, 1-67, 1-68222-3051 Impact Wrench, 1/2 in 1-66, 1-67, 1-68222-3053 Impact Wrench, 1/2 in 1-66, 1-67, 1-68222-3054 Impact Wrench, 1 in 1-66, 1-67, 1-68222-3055 Impact Wrench, 1 in 1-66, 1-67, 1-68222-3059 Air Ratchet 11--7722222-3061 Air Drill 1-71222-3062 Air Drill 1-71222-3063 Palm Sander, 6 in 1-69222-3064 Angle Sander, 7 in 1-69, 2-13222-3065 Vertical Sander, 7 in 1-69, 2-13222-3067 In-Line Sander 1-69222-3068 OA Sander, 6 in 1-69222-3069 Angle Polisher, 7 in 1-69222-3071 Angle Grinder, 7 in 1-70222-3072 Vertical Grinder, 7 in 1-70222-3074 Medium Mini Die Grinder 1-70222-3076 Right Angle Die Grinder 1-70222-3077 Extended Die Grinder 1-70222-3080 Long Air Hammer with

QC Chuck 11--7711, 1-72222-3083 Shears 11--7722222-3084 Compact Sander, 5 in 1-69222-3110 Chain & Cable Lubricant 3-26222-3111 Battery Cleaner 33--2266222-3112 Battery Saver 33--2266222-3113 General Purpose Spray Adhesive 33--44222-3114 High Temperature Anti-Seize 3-27222-3115 Heavy Duty Penetrating Oil 33--2266222-3117 Brake Cleaner 3-8, 3-25222-3118 Brake Cleaner (EAME only) 3-25222-3119 Component Cleaner (EAME only) 3-25222-3120 Windshield Cleaner 33--99222-3121 Aerosol Rust Preventative 33--2255222-3122 Plastic and Rubber Protectant 33--99222-3123 Penetrating Oil 33--2255222-3124 Component Cleaner 3-25222-7876 Student Tool Set 11--33, 1-80222-9996 Hardware Bin Kit, 1420 pieces 2-128222-9997 Hardware Bin Kit, 1570 pieces 2-128222-9998 Hardware Bin Kit, 2175 pieces 2-128222-9999 Hardware Bin Kit, 1520 pieces 2-128223-0000 Hardware Bin Kit, 1965 pieces 2-128223-0001 Hardware Bin Kit, 1985 pieces 2-128223-0002 Hardware Bin Kit, 1510 pieces 2-128

223-0003 Hardware Bin Kit, 1420 pieces 2-128223-0004 Hardware Bin Kit, 1420 pieces 2-128223-1154 Air Engraver 11--7722223-1693 Hand Drilling (Short Handle) 1-46223-1694 Dead Blow Sledge 1-46223-1695 Dead Blow Sledge 1-46223-1697 Double Face Sledge 1-46223-1698 Double Face Sledge 1-46223-3832 Cover, 30 in Combo 1-80223-3833 Cover, 40 in Combo 1-80223-3834 Cover, 53 in Combo 1-80223-3835 Laminated Press Board Top,

30 in Cabinet 1-80223-3836 Laminated Press Board Top,

40 in Cabinet 1-80223-3837 Butcher Block Top, 53 in Cabinet 1-80223-4352 Sheet Metal Ripper 1-72223-4353 Flat Chisel 1-72223-4354 Panel Cutter 1-72223-4355 Slitting Chisel 1-72223-4356 Weld Breaker 1-72223-4357 Needle, Coarse 1-72223-4358 Needle, Medium 1-72223-4359 Needle, Fine 1-72223-9116 ELC Dilution Test Kit 3-13224-0851 Chain 1-8224-0853 Chain 1-8224-5758 Sanding Disk 1-69224-8665 Diesel Engine Oil, Synthetic 3-15224-8666 Diesel Engine Oil, Synthetic 3-15224-8667 Diesel Engine Oil, Synthetic 3-15225-5082 Natural Gas Engine Oil, Low Ash,




EL350, 40 3-16225-6502 Black Paint, High Gloss, 1 gal 3-39226-0102 Punch, 15 Degree 1-72226-0124 Straight Punch 1-72226-0125 Decal Removal Disc 2-27226-0126 Retainer Roloc and Holder 2-27226-1900 Pin Punch Set, 7 Piece 11--5522226-1901 Pin Punch, 1/16 in, 102 mm (4.0 in) 1-52226-1902 Pin Punch, 3/32 in, 114 mm (4.5 in) 1-52226-1903 Pin Punch, 1/8 in, 127 mm (5.0 in) 1-52226-1904 Pin Punch, 5/32 in, 140 mm (5.5 in) 1-52226-1905 Pin Punch, 3/16 in, 140 mm (5.5 in) 1-52226-1906 Pin Punch, 7/32 in, 178 mm (7.0 in) 1-52226-1907 Pin Punch, 1/4 in, 178 mm (7.0 in) 1-52226-6624 HydroSolv SI (Lapping Compound) 3-31227-3129 Drift Punch Set, 5 Piece 11--5522227-3130 Drift Punch, 1/8 in, 229 mm (9.0 in) 1-52227-3131 Drift Punch, 3/16 in, 279 mm (11.0 in) 1-52227-3132 Drift Punch, 7/32 in, 305 mm (12.0 in) 1-52227-3133 Drift Punch, 1/4 in, 305 mm (12.0 in) 1-52227-3134 Drift Punch, 5/16 in, 305 mm (12.0 in) 1-52227-3795 Chisel Group, 5 Piece 11--5533227-3796 Chisel, 5/16 in 1-53227-3797 Chisel, 3/8 in 1-53227-3798 Chisel, 7/16 in 1-53227-3799 Chisel, 1/2 in 1-53227-3800 Chisel, 5/8 in 1-53227-4383 Torx(R) Socket Set, 10 Piece 11--1166227-4384 Torx Socket, E4, 1/4 in Drive 1-16227-4385 Torx Socket, E5, 1/4 in Drive 1-16227-4386 Torx Socket, E6, 1/4 in Drive 1-16227-4387 Torx Socket, E7, 1/4 in Drive 1-16227-4388 Torx Socket, E8, 1/4 in Drive 1-16227-4389 Torx Socket, E10, 3/8 in Drive 1-16227-4390 Torx Socket, E12, 3/8 in Drive 1-16227-4391 Torx Socket, E14, 3/8 in Drive 1-16227-4392 Torx Socket, E16, 3/8 in Drive 1-16227-4393 Torx Socket, E18, 3/8 in Drive 1-16



Part Number Index


227-8209 Crowfoot Wrench 11--2299228-6069 Transmission/Drive Train Oil,

0W-20 3-17228-6070 Transmission/Drive Train Oil,

0W-20 3-17228-6071 Artic Engine Oil, Synthetic 3-15228-6073 Artic Engine Oil, Synthetic 3-15230-0812 Ratchet Repair Kit 1-20230-0813 Ratchet Repair Kit 1-20230-6368 Automotive, Commercial,

Gen Set Battery 2-65231-0039 Air Hose Assembly 1-73231-0040 Hose Display Kit 1-73231-3801 Hydraulic Oil, 30 3-19231-3942 ORFS Plugs 2-49231-4550 Socket 3 1/4 in 1-19231-6041 Motor and Throttle

Repair Kit, 3/8 in 1-66, 1-67, 1-68231-6043 Anvil Repair Kit, 3/8 in 1-66, 1-67, 1-68231-6060 Motor and Throttle



Repair Kit, 3/4 in 1-66, 1-67, 1-68231-6070 Anvil Repair Kit, 3/4 in 1-66, 1-67, 1-68231-6071 Anvil Repair Kit, 1 in 1-66, 1-67, 1-68231-6073 Motor and Throttle

Repair Kit, 1 in 1-66, 1-67, 1-68231-6074 Anvil Repair Kit, 1 in 1-66, 1-67, 1-68231-6098 Motor and Throttle

Repair Kit, 1 in 1-66, 1-67, 1-68231-7015 Steel Canister Sprayer 3-26231-7016 Adjustable Tube 3-26231-7017 Seal 3-26231-7018 Nozzle 3-26231-7020 Brass Canister Sprayer 3-26231-9464 Backing Pad, 152 mm (6.0 in) 1-69231-9465 Backing Pad, 178 mm (7.0 in) 1-69231-9467 Backing Pad, 70 x 445 mm

(2.8 x 17.5 in) 1-69231-9468 Backing Pad, 152 mm (6.0 in) 1-69231-9469 Backing Pad, 127 mm (5.0 in) 1-69231-9471 Buffing Pad, 178 mm (7.0 in) 1-69232-0756 Air Hammer Spring Retainer 1-71232-5041 Automatic Power Tapes 1-49233-1632 Metric Wrench Set, 10 Piece 11--3355233-1635 Angle Wrench Set, 7 Piece 11--2255233-1636 Angle Wrench Set, Large, 7 Piece 11--2255233-1637 Ratchet Set, 3 Piece 11--2200233-1639 Yellow Grip Pliers Set, 3 Piece 11--5511233-1640 Screwdriver Set, 5 Piece 11--4444233-1642 Metric Ratchet Set, 17 Piece 11--3344233-8145 Vise (4 in) 2-56233-8146 Vise (5 in) 2-56233-8147 Vise (6 in) 2-56233-8576 Safety Glasses - Clear

(packaged for retail) 2-85233-8577 Safety Glasses - Clear 2-85233-8578 Safety Glasses - Gray

(packaged for retail) 2-85233-8579 Safety Glasses - Gray 2-85233-8580 Safety Glasses, Gray

(packaged for retail) 2-81, 2-85233-8581 Safety Glasses, blue 2-86233-8582 Safety Glasses, blue 2-86233-8583 Safety Goggles 22--8888, 2-102, 2-103233-8584 Safety Goggles 22--8888233-8585 Rad Band Earplugs 2-80233-8586 Replacement Earplugs 2-80233-8587 Silencer Ear Muffs 22--8811233-8588 Performance Kit

(glasses, ear muffs) 22--8811

233-9689 Impact Kit, 19.2 Volt (USA) 1-75, 1-76233-9690 Impact Kit, 19.2 Volt (Japan) 1-75, 1-76233-9712 Impact Kit, 19.2 Volt (Australia) 1-75, 1-76233-9731 Impact Kit, 19.2 Volt (UK) 1-75, 1-76233-9732 Impact Kit, 19.2 Volt (Europe) 1-75, 1-76233-9733 Drill Kit, 19.2 Volt (USA) 1-75, 1-76233-9734 Drill Kit, 19.2 Volt (Japan) 1-75, 1-76233-9735 Drill Kit, 19.2 Volt (Australia) 1-75, 1-76233-9736 Drill Kit, 19.2 Volt (UK) 1-75, 1-76233-9737 Drill Kit, 19.2 Volt (Europe) 1-75, 1-76233-9738 Battery Charger, 120V,

60 Hz (USA) 1-75233-9740 Battery Charger, 120V,

60 Hz (Japan) 1-75233-9741 Battery Charger, 220 to 240V,

50/60 Hz (Australia) 1-75233-9743 Battery Charger, 220 to 240V,

50/60 Hz (UK) 1-75233-9745 Battery Charger, 220 to 240V,

50/60 Hz (Europe) 1-75233-9746 Battery 1-75, 1-76233-9747 Mobile Charger 11--7766233-9797 Antifreeze/Coolant, Heavy Duty 3-13233-9798 Antifreeze/Coolant, Heavy Duty 3-13233-9799 Antifreeze/Coolant, Heavy Duty 3-13234-0544 Drill Chuck, 3/8 in 1-71234-0545 Drill Chuck, 1/2 in 1-71234-4323 Wide-range Floodlight,

10 x 25 mm, weld stud 2-66234-4324 Long-range Floodlight,

10 x 25 mm, weld stud 2-66234-4325 Wide-range Floodlight,





10 x 25 mm, weld stud 2-66234-6041 Sockets, 4 1/4 in 1-19235-0844 Absorbent Sock, 3 x 48 in 2-98, 2-102,

2-103235-0845 Absorbent Pillow, 10 x 10 x 2 in 2-98,

2-102, 2-103235-0847 Absorbent Roll, 30 in x 150 ft 2-99235-0848 Absorbent Pad, 16 x 20 in 2-99, 2-102,

2-103235-0849 Lightweight Absorbent Roll,

Dark Gray 22--110011235-0850 Oil-Only Absorbent Roll,

30 in x 150 ft 2-100235-0853 Oil-Only Absorbent Pad,

16 in x 20 in 2-100235-0859 All-Purpose Wipers 2-102235-0865 Absorbent Pad, 17 x 19 in 2-99, 2-102235-0866 Absorbent Pad, Overseas Only 2-99235-0867 Absorbent Roll,

38 in wide x 144 ft 2-99235-0868 Absorbent Roll, Overseas Only,

38 in x 144 ft 2-99235-0869 Oil-Only Absorbent Pad,

17 in x 19 in 2-100235-0870 Oil-Only Absorbent Pad,

Overseas Only, 17 x 19 in 2-100235-0871 Oil-Only Absorbent Roll,

38 in x 144 ft 2-100235-0872 Oil-Only Absorbent Roll,

Overseas Only, 38 in x 144 ft 2-100235-6479 Half Facepiece Respirator 22--8822235-8598 Electrical Tape 22--111188236-1169 Multiple Position Pliers 1-51236-2646 Jaw Insert Kit 2-56236-2647 Jaw Insert Kit 2-56236-2648 Jaw Insert Kit 2-56236-2654 Pipe Jaw Kits 2-56

236-2655 Pipe Jaw Kits 2-56236-2656 Pipe Jaw Kits 2-56236-5133 Plastic Tool Box on Wheels,

670 x 395 x 429 mm 1-84236-5134 Plastic Tool Box,

526 x 344 x 426 mm 1-84236-5135 Plastic Tool Box 1-84236-5136 Plastic Tool Box, lg 1-84236-5137 Plastic Tool Box 1-84236-6597 P100 High Efficiency Filter 2-82236-6598 Organic Vapor Cartridge 2-82236-8038 Mandrel 2-20236-8039 PSA Sanding Disc, 127 mm (5 in),

A/O 60 2-14236-8040 PSA Sanding Disc, 127 mm (5 in),








A/O 400 2-14236-8048 PSA Sanding Disc, 152.4 mm (6 in),









A/O 400 2-14236-8061 Type 27 Grinding Wheel,

6 x 1/4 x 7/8 in 2-20236-8066 Thin Cut Abrasive Cutting Wheel,

4 1/2 in 2-20236-8067 Thin Cut Abrasive Cutting Wheel,

5 in 2-20236-8068 Thin Cut Abrasive Cutting Wheel,

6 in 2-20236-8069 Fiber Disc, 7 in x 5/8 in, 36 grit 2-12236-8070 Type 27 Zir. Grinding Wheel,

4 x 1/4 x 3/8 in 2-17236-8071 Type 27 Zir. Grinding Wheel,

4 x 1/4 x 5/8 in 2-17236-8072 R-Type Mini Grinding Disc, 2 in,

24 grit 2-13236-8073 R-Type Mini Grinding Disc, 2 in,







50 grit 2-13


Part Number Index


236-8082 R-Type Mini Grinding Disc, 3 in, 80 grit 2-13

236-8083 R-Type Mini Grinding Disc, 3 in, 120 grit 2-13

236-8092 Surface Reconditioning Disc, 3 in 2-10236-8093 Carbide Bur, 3/8 x 5/8 in, egg 2-26236-8094 Carbide Bur, 3/8 in, ball 2-26236-8095 Carbide Bur, 3/8 x 3/4 in,

pointed tree 2-26236-8096 Carbide Bur, 3/8 x 3/4 in,

cylindrical 2-26236-8097 Carbide Bur, 3/8 x 3/4 in,

round nose 2-26236-8098 Carbide Bur, 3/8 x 1 1/16 in,

cone radius end 2-26236-8100 Carbide Bur, 1/8 x 9/16 in,

flat end cut 2-26236-8101 Carbide Bur, 1/8 x 9/16 in,

round end 2-26236-8103 Aluminum Carbide Burs,

3/4 in x 3/4 in, round nose 2-26236-8104 Aluminum Carbide Burs,

3/8 in x 3/4 in, cylindrical 2-26236-8105 Type 29 Zir. Flap Disc, 4.5 in, ZIR 24 2-6236-8106 Type 29 Zir. Flap Disc, 4.5 in, ZIR 36 2-6236-8107 Type 29 Zir. Flap Disc, 4.5 in, ZIR 60 2-6236-8109 Type 29 Zir. Flap Disc, 4.5 in, ZIR 80 2-6236-8111 Type 29 Zir. Flap Disc, 4.5 in, ZIR 120 2-6236-8112 Type 29 Zir. Flap Disc, 6 in, ZIR 24 2-6236-8113 Type 29 Zir. Flap Disc, 6 in, ZIR 36 2-6236-8114 Type 29 Zir. Flap Disc, 6 in, ZIR 60 2-6236-8115 Type 29 Zir. Flap Disc, 6 in, ZIR 80 2-6236-8116 Type 29 Zir. Flap Disc, 6 in, ZIR 120 2-6237-3653 Type 27 Zir. Grinding Wheel,

4 x 1/4 x 7/8 in 2-17237-4950 Extended Life Coolant, Australia 3-12237-4951 Extended Life Coolant, Australia 3-12237-4952 Extended Life Coolant, Australia 3-12237-4953 Extended Life Coolant, Australia 3-12237-5181 Welding Respirator 22--8822237-7670 Antifreeze/Coolant, Australia 3-12237-8092 Corded Disposable Foam Plugs 22--8800238-8244 Pen Light, White LED 22--6688238-8291 Antifreeze/Coolant, Australia 3-12238-8647 Extended Life Coolant, 1 gal 3-12238-8648 Extended Life Coolant 3-12238-8649 Extended Life Coolant 3-12238-8650 Extended Life Coolant 3-12238-8651 Antifreeze/Coolant 3-12238-8653 Engine Antifreeze/Coolant 3-12239-1079 Safety Glasses 2-86239-1082 Safety Glasses, clear 2-86239-1083 Safety Glasses, gray 2-86239-1084 Safety Glasses, gray 2-86239-1085 Wraparound Safety Glasses 22--8855239-1086 Lens Cleaning Towelettes 22--8888239-1087 Lens Cleaning Station 22--8888239-1088 Multipositional Ear Muff 22--8811239-1089 Reusable Uncorded Plugs 22--8800239-1090 Disposable Foam Plugs 22--8800239-2297 Tool Box, Steel 11--8833239-3649 Antifreeze/Coolant, Heavy Duty 3-13239-4140 Handled Pry Bar Kit 1-46239-4141 Handled Pry Bar, 30 cm (12 in) 1-46239-4142 18 in Handled Pry Bar, 46 cm (18 in) 1-46239-4143 24 in Handled Pry Bar, 61 cm (24 in) 1-46239-4255 36 in Handled Pry Bar, 91 cm (36 in) 1-46239-4964 Hard Hat, White, US Version 2-89239-4965 Hard Hat, White, European Version 2-89239-4966 Hard Hat, Yellow, US Version 2-89239-4967 Hard Hat, Yellow, European Version 2-89239-6823 Reversible Rachet, 1/4 in,

1/4 in Drive 1-2, 1-9, 1-20239-6824 Reversible Rachet, 3/8 in,

3/8 in Drive 1-1, 1-2, 1-8, 1-10, 1-20239-6825 Ratchet, 261.9 mm (10.31 in) 1-20

239-6826 Reversible Rachet, 1/2 in, 1/2 in Drive 1-1, 1-3, 1-4, 1-5, 1-6,

1-8, 1-9, 1-12, 1-20240-1678 Cable Tie Release 2-124241-0706 Grease Gun Group with 2 batteries 11--5577241-0860 Twist Socket, 10 mm 1-10, 1-27241-0861 Twist Socket, 12 mm 1-10, 1-27241-0862 Twist Socket, 13 mm 1-10, 1-27241-0863 Twist Socket, 14 mm 1-10, 1-27241-0864 Twist Socket, 15 mm 1-10, 1-27241-0865 Twist Socket, 17 mm 1-10, 1-27241-0866 Twist Socket, 3/8 in 1-10, 1-27241-0867 Twist Socket, 11 mm (7/16 in) 1-10, 1-27241-0868 Twist Socket, 1/2 in 1-10, 1-27241-0869 Twist Socket, 9/16 in 1-10, 1-27241-0870 Twist Socket, 16 mm (5/8 in) 1-10, 1-27241-0871 Twist Socket, 11/16 in 1-10, 1-27241-0872 Twist Socket, 19 mm (3/4 in) 1-10, 1-27241-0873 Twist Socket Set, 13 piece,

3/8 in Drive 11--1100, 11--2277241-8522 Extension Cords - 25 ft,

single outlet 2-74241-8529 Extension Cords - 50 foot 2-74241-8530 Extension Cords - 100 foot 2-74241-9512 Cleaning & Finishing Hand Pad, fine 2-22242-0779 Socket 1-33242-1408 Hydraulic Wrench 3/4 in Sq Drive 1-64242-1409 Hydraulic Wrench 1 in Sq Drive 1-64242-1410 Hydraulic Torque Wrench

3/4 in Sq Drive 1-64242-1411 Hydraulic Torque Wrench

3/4 in Sq Drive 1-64242-1412 Hydraulic Torque Wrench

1 in Sq Drive 1-64242-1413 Hydraulic Wrench,

Low Clearance Bolt 1-63242-1414 Hydraulic Wrench,

Low Clearance Bolt 1-63242-1415 Hydraulic Wrench,

Low Clearance Bolt 1-63242-1416 Long Reaction Arm

for Hydraulic Torque 1-64242-1417 Long Reaction Arm

for Hydraulic Torque 1-64242-1418 Long Reaction Arm

for Hydraulic Torque 1-64242-1419 36 mm Low Clearance Hex Link






(8,700 max ft lbs) 1-63242-1435 Electric Hydraulic Pump, 230 VAC 1-65242-3466 Gear Oil, Synthetic, 75W-140 3-20242-3467 Gear Oil, Synthetic, 75W-140 3-20242-6163 Hex (Extension) Wrench 1-41242-6990 Dry Film Lubricant 33--2266243-1874 Extension Cords - 25 foot 2-74243-1875 Extension Cords - 50 foot 2-74243-1876 Extension Cords - 100 foot 2-74243-1877 Extension Cords - 25 foot 2-74243-1878 Extension Cords - 50 foot 2-74243-1879 Extension Cords - 100 foot 2-74243-5173 Hex Ball Driver Socket 1-16243-5174 Hex Ball Driver Socket 1-16243-5175 Hex Ball Driver Socket 1-16243-5177 Hex Ball Driver Socket 1-16243-5178 Hex Ball Driver Socket 1-16243-5179 Hex Ball Driver Socket 1-16243-5180 Hex Ball Driver Socket 1-16243-5181 Hex Ball Driver Socket 1-16

243-5182 Metric Hex Ball Driver Socket Set 11--3311243-5183 Metric Hex Ball Driver Socket 1-31243-5184 Metric Hex Ball Driver Socket 1-31243-5185 Metric Hex Ball Driver Socket 1-31243-5186 Metric Hex Ball Driver Socket 1-31243-5187 Metric Hex Ball Driver Socket 1-31243-5188 Metric Hex Ball Driver Socket 1-31243-5189 Metric Hex Ball Driver Socket 1-31243-5190 Metric Hex Ball Driver Socket 1-31243-5450 Power Module White Paint,

High Gloss, 1 gal Can 3-38243-5451 Power Module White Paint,

High Gloss, Aerosol Can 3-38243-5458 Cat Gray 61 Paint, High Gloss,

1 gal Can 3-38243-5459 Cat Gray 61 Paint, High Gloss,

Aerosol Can 3-38243-6495 Drill Chuck (key) 1-71243-6496 Drill Chuck (key) 1-71244-0910 Pry Bar Display 11--4466245-3224 Battery Group 2-69245-5836 Oil Absorbent Pads, 17 x 19 in 22--9988245-9823 Double Face Sledge 1-46245-9965 Electric Hydraulic Pump, 115 VAC 1-65246-0436 Hydraulic Wrench Repair Kit 1-64246-0437 Hydraulic Wrench Repair Kit 1-64246-0438 Hydraulic Wrench Repair Kit 1-64246-0439 Hydraulic Wrench Repair Kit 1-64246-0440 Hydraulic Wrench Repair Kit 1-64246-0441 Repair Kit for Hydraulic Wrench 1-63246-0442 Repair Kit for Hydraulic Wrenches 1-63246-0443 Repair Kit for Hydraulic Wrenches 1-63246-5128 Straight Jaw Locking Pliers 1-51246-5129 Curved Jaw Locking Pliers 1-51246-5131 Long Rounded Jaw Locking Pliers 1-51246-5132 Curved Jaw with Cotter

Locking Pliers 1-51246-5133 Straight Jaw Locking Pliers 1-51246-5134 Locking Pliers Set, 5 piece 1-51246-5141 Unlined Leather Driver's Gloves,

Medium 2-93246-5142 Unlined Leather Driver's Gloves,

Medium, Bulk-12 pair 2-93246-5143 Unlined Leather Driver's Gloves,

Large 2-93246-5144 Unlined Leather Driver's Gloves,

Large, Bulk-12 pair 2-93246-5145 Unlined Leather Driver's Gloves, XL 2-93246-5146 Unlined Leather Driver's Gloves, XL,

Bulk-12 Pair 2-93246-5147 Lined Leather Driver's Gloves, XL 2-93246-5148 Lined Leather Driver's Gloves, XL,

Bulk-12 pair 2-93246-5149 Lined Leather Driver's Gloves, Lg 2-93246-5150 Lined Leather Driver's Gloves, Lg,

Bulk-12 pair 2-93246-5151 Lined Leather Driver's Gloves, Med 2-93246-5152 Lined Leather Driver's Gloves, Med,

Bulk-12 pair 2-93246-5153 Split Leather Driver's Gloves, single 2-93246-5154 Split Leather Driver's Gloves, bulk 2-93246-5155 Split Leather Palm Gloves, Lg 2-93246-5156 Split Leather Palm Gloves, Lg,

Bulk-12 pair 2-93246-5157 Split Cowhide Palm Gloves, Lg 2-94246-5158 Split Cowhide Palm Gloves, Lg,

Bulk-12 Pair 2-94246-5159 Split Cowhide Palm Gloves, Med 2-94246-5160 Split Cowhide Palm Gloves, Med,

Bulk-12 Pair 2-94246-5161 Split Cowhide Palm Gloves, XL 2-94246-5162 Split Cowhide Palm Gloves, XL,

Bulk-12 Pair 2-94246-5163 Traditional All-purpose Gloves 22--9944246-5164 Neoprene-coated Gloves, Lg 22--9955246-5165 Jersey Gloves, Lg 2-94246-5166 Jersey Gloves, Lg, Bulk-12 Pair 2-94



Part Number Index

246-5167 Fleeced Gloves, Lg 2-94246-5168 Fleeced Gloves, Lg, Bulk-12 Pair 2-94246-5169 Reversible Gloves, 12 Pair per Pkg 22--9944246-5179 Disposable Nitrile Gloves,

Powdered, Lg 2-96246-5180 Disposable Nitrile Gloves,

Powder-Free, Lg 2-96246-5181 Disposable Latex Gloves, Lg 2-96246-7509 Backing Pad 1-69246-7511 Threaded Insert Kit, Metric, M6-1 2-42246-7513 Threaded Insert Kit, Metric,

M8-1.25 2-42246-7514 Threaded Insert Kit, Metric,



M12-1.75 2-42246-7517 Threaded Insert Kit, Metric, M16-2 2-42246-7518 Threaded Insert Kit, Metric,

M20-2.5 2-42246-7519 Threaded Insert Kit, Metric, M24-3 2-42246-7520 Threaded Insert Replace Kit,

Metric, M6-1 2-42246-7521 Threaded Insert Replace Kit,

Metric, M8-1.25 2-42246-7522 Threaded Insert Replace Kit,




Metric, M16-2 2-42246-7526 Threaded Insert Replace Kit,


Metric, M24-3 2-42246-7948 Organizing Foam 1-80246-7950 Organizing Foam 1-80246-8173 Socket, 13/16 in 1-14246-8175 Socket, 7/8 in 1-14246-8176 Socket, 15/16 in 1-14246-8177 Socket, 1 in 1-14246-8178 Socket, 1 1/16 in 1-14246-8179 Socket, 1 1/8 in 1-14246-8180 Socket, 1 3/16 in 1-14246-8181 Socket, 1 1/4 in 1-14246-8182 Socket, 1 5/16 in 1-14246-8184 Universal Impact Socket Set 11--1144246-8185 10 mm Socket 1-30246-8186 11 mm Socket 1-30246-8187 12 mm Socket 1-30246-8188 13 mm Socket 1-30246-8189 14 mm Socket 1-30246-8190 15 mm Socket 1-30246-8191 16 mm Socket 1-30246-8192 17 mm Socket 1-30246-8194 18 mm Socket 1-30246-8197 19 mm Socket 1-30246-8199 Metric Universal Impact Socket Set 11--3300246-8499 Hex Ball Driver Socket Set 11--1166247-0188 Hex Head Bolt, 1/4-20 x 1/2 in, 2-128247-0189 Hex Head Bolt, 1/4-20 x 3/4 in 2-128247-0190 Hex Head Bolt, 1/4-20 x 1 in 2-128247-0191 Hex Head Bolt, 1/4-20 x 1 1/4 in 2-128247-0192 Hex Head Bolt, 1/4-20 x 1 1/2 in 2-128247-0193 Hex Head Bolt, 1/4-20 x 1 3/4 in 2-128247-0194 Hex Head Bolt, 1/4-20 x 2 in 2-128247-0195 Hex Head Bolt, 1/4-20 x 2 1/4 in 2-128247-0196 Hex Head Bolt, 1/4-20 x 2 1/2 in 2-128247-0197 Hex Head Bolt, 1/4-20 x 2 3/4 in 2-128247-0198 Hex Head Bolt, 1/4-20 x 3 in 2-128247-0199 Hard Washer, 1/4 in 2-128247-0200 Lock Washer 1/4 in 2-128247-0201 Full Nut, 1/4-20 2-128247-0202 Hex Head Bolt, 5/16-18 x 1/2 in 2-128

247-0203 Hex Head Bolt, 5/16-18 x 3/4 in 2-128247-0204 Hex Head Bolt, 5/16-18 x 1 in 2-128247-0205 Hex Head Bolt, 5/16-18 x 1 1/4 in 2-129247-0206 Hex Head Bolt, 5/16-18 x 1 1/2 in 2-129247-0207 Hex Head Bolt, 5/16-18 x 1 3/4 in 2-129247-0208 Hex Head Bolt, 5/16-18 x 2 in 2-129247-0209 Hex Head Bolt, 5/16-18 x 2 1/4 in 2-129247-0210 Hex Head Bolt, 5/16-18 x 2 1/2 in 2-129247-0211 Hex Head Bolt, 5/16-18 x 2 3/4 in 2-129247-0212 Hex Head Bolt, 5/16-18 x 3 in 2-129247-0213 Hard Washer, 5/16 in 2-129247-0214 Lock Washer, 5/16 in 2-129247-0215 Full Nut, 5/16-18 2-129247-0216 Hex Head Bolt, 3/8-16 x 1/2 in 2-129247-0217 Hex Head Bolt, 3/8-16 x 3/4 in 2-129247-0218 Hex Head Bolt, 3/8-16 x 1 in 2-129247-0219 Hex Head Bolt, 3/8-16 x 1 1/4 in 2-129247-0220 Hex Head Bolt, 3/8-16 x 1 1/2 in 2-129247-0221 Hex Head Bolt, 3/8-16 x 1 3/4 in 2-129247-0222 Hex Head Bolt, 3/8-16 x 2 in 2-129247-0223 Hex Head Bolt, 3/8-16 x 2 1/4 in 2-129247-0224 Hex Head Bolt, 3/8-16 x 2 1/2 in 2-129247-0225 Hex Head Bolt, 3/8-16 x 2 3/4 in 2-129247-0226 Hex Head Bolt, 3/8-16 x 3 in 2-129247-0227 Hard Washer, 3/8 in 2-129247-0228 Lock Washer, 3/8 in 2-129247-0229 Full Nut 3/8-16 2-129247-0230 Hex Head Bolt, 1/2-13 x 1/2 in 2-129247-0231 Hex Head Bolt, 1/2-13 x 3/4 in 2-129247-0232 Hex Head Bolt, 1/2-13 x 1 in 2-129247-0233 Hex Head Bolt, 1/2-13 x 1 1/4 in 2-129247-0234 Hex Head Bolt, 1/2-13 x 1 1/2 in 2-129247-0235 Hex Head Bolt, 1/2-13 x 1 3/4 in 2-129247-0236 Hex Head Bolt, 1/2-13 x 2 in 2-129247-0237 Hex Head Bolt, 1/2-13 x 2 1/4 in 2-129247-0238 Hex Head Bolt, 1/2-13 x 2 1/2 in 2-129247-0239 Hex Head Bolt, 1/2-13 x 2 3/4 in 2-129247-0240 Hex Head Bolt, 1/2-13 x 3 in 2-129247-0241 Hard Washer, 1/2 in 2-129247-0242 Lock Washer, 1/2 in 2-129247-0243 Full Nut, 1/2-13 2-129247-0244 Hex Head Bolt, 5/8-11 x 3/4 in 2-129247-0245 Hex Head Bolt, 5/8-11 x 1 in 2-129247-0246 Hex Head Bolt, 5/8-11 x 1 1/4 in 2-129247-0247 Hex Head Bolt, 5/8-11 x 1 1/2 in 2-129247-0248 Hex Head Bolt, 5/8-11 x 1 3/4 in 2-129247-0249 Hex Head Bolt, 5/8-11 x 2 in 2-129247-0250 Hex Head Bolt, 5/8-11 x 2 1/4 in 2-129247-0251 Hex Head Bolt, 5/8-11 x 2 1/2 in 2-129247-0252 Hex Head Bolt, 5/8-11 x 2 3/4 in 2-129247-0253 Hex Head Bolt, 5/8-11 x 3 in 2-129247-0254 Hard Washer, 5/8 in 2-129247-0255 Lock Washer, 5/8 in 2-129247-0256 Full Nut, 5/8-11 2-129247-0583 Hex Head Bolt, M6 x 1, 12 mm 2-129247-0584 Hex Head Bolt, M6 x 1, 16 mm 2-129247-0585 Hex Head Bolt, M6 x 1, 20 mm 2-129247-0586 Hex Head Bolt, M6 x 1, 25 mm 2-129247-0587 Hex Head Bolt, M6 x 1, 30 mm 2-129247-0588 Hex Head Bolt, M6 x 1, 35 mm 2-129247-0589 Hex Head Bolt, M6 x 1, 40 mm 2-129247-0590 Hex Head Bolt, M6 x 1, 45 mm 2-129247-0591 Hex Head Bolt, M6 x 1, 50 mm 2-129247-0592 Washer, M6 2-129247-0593 Hex Nut, M6 x 1 2-129247-0594 Hex Head Bolt, M8 x 1.25, 16 mm 2-129247-0595 Hex Head Bolt, M8 x 1.25, 20 mm 2-129247-0596 Hex Head Bolt, M8 x 1.25, 25 mm 2-129247-0597 Hex Head Bolt, M8 x 1.25, 30 mm 2-129247-0598 Hex Head Bolt, M8 x 1.25, 35 mm 2-129247-0599 Hex Head Bolt, M8 x 1.25, 40 mm 2-129247-0600 Hex Head Bolt, M8 x 1.25, 45 mm 2-129247-0601 Hex Head Bolt, M8 x 1.25, 50 mm 2-129247-0602 Hex Head Bolt, M8 x 1.25, 60 mm 2-129247-0603 Hex Head Bolt, M8 x 1.25, 70 mm 2-129247-0604 Washer, M8 2-129247-0605 Hex Nut, M8 x 1.25 2-129

247-0606 Hex Head Bolt, M10 x 1.5, 20 mm 2-129247-0607 Hex Head Bolt, M10 x 1.5, 25 mm 2-129247-0608 Hex Head Bolt, M10 x 1.5, 30 mm 2-129247-0609 Hex Head Bolt, M10 x 1.5, 35 mm 2-129247-0610 Hex Head Bolt, M10 x 1.5, 40 mm 2-129247-0611 Hex Head Bolt, M10 x 1.5, 45 mm 2-129247-0612 Hex Head Bolt, M10 x 1.5, 50 mm 2-129247-0613 Hex Head Bolt, M10 x 1.5, 60 mm 2-129247-0614 Hex Head Bolt, M10 x 1.5, 65 mm 2-129247-0615 Hex Head Bolt, M10 x 1.5, 70 mm 2-129247-0616 Washer, M10 2-129247-0617 Hex Nut, M10 x 1.50 2-129247-0618 Hex Head Bolt, M12 x 1.75, 20 mm 2-129247-0619 Hex Head Bolt, M12 x 1.75, 25 mm 2-129247-0620 Hex Head Bolt, M12 x 1.75, 30 mm 2-129247-0621 Hex Head Bolt, M12 x 1.75, 35 mm 2-129247-0622 Hex Head Bolt, M12 x 1.75, 40 mm 2-129247-0623 Hex Head Bolt, M12 x 1.75, 45 mm 2-129247-0624 Hex Head Bolt, M12 x 1.75, 50 mm 2-129247-0625 Hex Head Bolt, M12 x 1.75, 60 mm 2-129247-0626 Washer, M12 2-129247-0627 Hex Nut, M12 x 1.75 2-129247-0698 Hose Clamp, 54 - 105 mm 2-129247-0699 Hose Clamp, 60 - 82 mm 2-129247-0700 Hose Clamp, 45 - 67 mm 2-129247-0701 Hose Clamp, 16 - 27 mm 2-129247-0702 Hose Clamp, 6 - 16 mm 2-129247-0703 Hose Clamp, 108 - 130 mm 2-129247-0717 Cotter Pin, 1/8 x 1 in 2-129247-0718 Cotter Pin, 1/8 x 3/4 in 2-129247-0719 Cotter Pin, 3/32 x 1/2 in 2-129247-0720 Cotter Pin, 1/8 x 2 in Lg 2-129247-0721 Cotter Pin, 1/8 x 1 1/4 in 2-129247-0749 Fuse (10 Amp) 2-129247-0750 Fuse (15 Amp) 2-129247-0751 Fuse (20 Amp) 2-129247-0752 Mini Fuse (10 Amp) 2-129247-0753 Mini Fuse (15 Amp) 2-129247-0754 Mini Fuse (20 Amp) 2-129247-0755 Mini Fuse (25 Amp) 2-129247-0762 Cable Strap, 170.2 x 4.9 mm 2-129247-0763 Cable Strap, 355.6 x 4.9 mm 2-129247-0764 Cable Strap, 355.6 x 7.9 mm 2-129247-4447 Leather Welding Gloves, Lg 2-94247-4449 Nylon Gloves with Nitrile Coating,

Lg, Bulk-12 Pair 2-96247-4450 Nylon Gloves with Nitrile Coating,

XL, Bulk-12 Pair 2-96247-6410 Leather Welding Gloves, Lg,

Bulk-12 Pair 2-94247-6412 Nylon Gloves with Nitrile

Coating, Lg 2-96247-6413 Nylon Gloves with Nitrile

Coating, XL 2-96247-9662 Thread Insert Kit,

Metric M6-12 2-41, 2-42247-9663 Threaded Insert Kit,

Metric M8-24 2-41, 2-42248-2283 Tool Bag, 24" long, Carrying Strap 11--8833248-7518 Diesel Engine Oil, 15W-40 3-14248-7519 Diesel Engine Oil, Synthetic, 5 gal 3-15248-7520 Diesel Engine Oil, 30 3-14248-7521 Transmission/Drive Train Oil, 30 3-17248-7522 Hydraulic Oil, 10W 3-19248-8810 Ratcheting Wrench Set, Fractional,

8 piece 11--2244248-8811 Ratcheting Wrench, 5/16" 1-24248-8812 Ratcheting Wrench, 3/8" 1-24248-8813 Ratcheting Wrench, 7/16" 1-24248-8814 Ratcheting Wrench, 1/2" 1-24248-8815 Ratcheting Wrench, 9/16" 1-24248-8816 Ratcheting Wrench, 5/8" 1-24248-8817 Ratcheting Wrench, 1-1/16" 1-24248-8818 Ratcheting Wrench, 3/4" 1-24248-8819 Ratcheting Wrench Set, Metric,

12 piece 11--3366248-8820 Ratcheting Wrench, 8 mm 1-36


Part Number Index


248-8822 Ratcheting Wrench, 9 mm 1-36248-8823 Ratcheting Wrench, 10 mm 1-36248-8824 Ratcheting Wrench, 11 mm 1-36248-8825 Ratcheting Wrench, 12 mm 1-36248-8826 Ratcheting Wrench, 13 mm 1-36248-8827 Ratcheting Wrench, 14 mm 1-36248-8828 Ratcheting Wrench, 15 mm 1-36248-8829 Ratcheting Wrench, 16 mm 1-36248-8830 Ratcheting Wrench, 17 mm 1-36248-8831 Ratcheting Wrench, 18 mm 1-36248-8832 Ratcheting Wrench, 19 mm 1-36249-0661 Clear Acetate Visor 2-90249-1814 Power Module White Paint High

Gloss Water Reducible 2.8 VOC 3-39249-1815 Power Module White Paint High

Gloss Water Reducible 2.8 VOC 3-39249-1816 Power Module White Paint, High

Gloss 3.5 VOC 3-39249-1817 Power Module White Paint, High

Gloss, 5 gal Pail 3-38249-2309 Natural Gas Engine Oil, Low Ash,

EL350, 40 3-16249-5284 End Wire Brush, 1/4" Shank,

Crimped Wire 2-4249-5285 End Wire Brush, 1/4" Shank,

Crimped Wire 2-4249-5286 End Wire Brush, 1/4" Shank,

Crimped Wire 2-4249-7265 Safety Glasses, Clear

(packaged for industrial) 2-85250-0480 Marine Dual Terminal Battery 2-65250-6865 Check-a-Thread, in 2-130250-6866 Check-a-Thread, mm 2-130254-3422 WypAll X60, 9.1 x 16.8 in 22--110055254-3767 Small Spill Response Bag 22--110022254-3768 Small Spill Response Cart 22--110022254-3769 Large Spill Response Cart 22--110033254-3770 Small Spill Response Cart 22--110033254-3969 Absorbent Sock,

3 in x 10 ft long 2-98, 2-102, 2-103254-5307 Backing Pad, 4.5" 2-12, 2-13254-5308 Backing Pad, 5" 2-12, 2-13254-5309 Backing Pad, 7" 2-12, 2-13254-5310 Flap Brush, 1.5 x 1", coarse, 60 grit 2-5254-5311 Flap Brush, 1.5 x 1", medium, 120 grit 2-5254-5312 Flap Brush, 1.5 x 1", very fine, 240 grit 2-5254-5313 Flap Brush, 3 x 2", coarse, 60 grit 2-5254-5314 Flap Brush, 3 x 2", medium, 120 grit 2-5254-5315 Flap Brush, 3 x 2", very fine, 240 grit 2-5254-5316 Surface Condition Brush, 1.5 x 1",

coarse 2-18254-5317 Surface Condition Brush, 1.5 x 1",

medium 2-18254-5318 Surface Condition Brush, 1.5 x 1",

very fine 2-18254-5319 Surface Condition Brush, 3 x 2",

coarse 2-18254-5320 Surface Condition Brush, 3 x 2",

very fine 2-18254-5321 Flap Wheel, 1 x 1", 60 grit 2-19254-5322 Flap Wheel, 1 x 1", 80 grit 2-19254-5323 Flap Wheel, 1 x 1", 120 grit 2-19254-5324 Flap Wheel, 1 x 1", 180 grit 2-19254-5325 Flap Wheel, 1 x 1", 240 grit 2-19254-5326 Flap Wheel, 2 x 1", 60 grit 2-19254-5327 Flap Wheel, 2 x 1", 80 grit 2-19254-5328 Flap Wheel, 2 x 1", 120 grit 2-19254-5329 Flap Wheel, 2 x 1", 180 grit 2-19254-5330 Flap Wheel, 2 x 1", 240 grit 2-19254-5331 Flap Wheel, 3 x 1", 60 grit 2-19254-5332 Flap Wheel, 3 x 1", 80 grit 2-19254-5333 Flap Wheel, 3 x 1", 120 grit 2-19254-5334 Flap Wheel, 3 x 1", 180 grit 2-19254-5335 Flap Wheel, 3 x 1", 240 grit 2-19254-5336 Flap Disc 2-6254-5337 Type 29 Zirconia Flap Disc 2-6254-5338 Type 29 Zirconia Flap Disc 2-6

254-5339 Type 29 Zirconia Flap Disc, 4.5" 2-6254-5340 Type 29 Zirconia Flap Disc, 4.5" 2-6254-5341 Type 29 Zirconia Flap Disc, 4.5" 2-6254-5342 Type 29 Zirconia Flap Disc, 7" 2-6254-5343 Type 29 Zirconia Flap Disc, 7" 2-6254-5344 Type 29 Zirconia Flap Disc, 7" 2-6254-5345 Hi-Density Zirconia Flap Disc, 4.5" 2-6254-5346 Hi-Density Zirconia Flap Disc, 4.5" 2-6254-5347 Hi-Density Zirconia Flap Disc, 4.5" 2-6254-5348 Hi-Density Zirconia Flap Disc, 4.5" 2-6254-5349 Hi-Density Zirconia Flap Disc, 7" 2-6254-5350 Hi-Density Zirconia Flap Disc, 7" 2-6254-5351 Hi-Density Zirconia Flap Disc, 7" 2-6256-4816 Hand Tool Group 11--99256-4879 “L” Shaped Torx Wrench T50 1-9, 11--4433258-2357 Green Acetate Visor 2-90258-5686 Sockets, 1 in sq drive impact

1 1/2 in 1-19259-7005 Disposable Nitrile Gloves,

Powdered, Med 2-96259-7006 Disposable Nitrile Gloves,

Powdered, XL 2-96259-7007 Disposable Nitrile Gloves,

Powder-Free, Med 2-96259-7008 Disposable Nitrile Gloves,

Powder-Free, XL 2-96260-1776 Disposable Nitrile Gloves,

Powdered, Sm 2-96260-1777 Disposable Latex Gloves, Sm 2-96260-1778 Disposable Latex Gloves, Med 2-96260-1779 Disposable Latex Gloves, XL 2-96260-1802 Disposable Nitrile Gloves,

Powder-Free, Sm 2-96260-3764 Repair Kit, Non-Branded

Head Ratchet 1-58260-3765 Repair Kit, Non-Branded

Head Ratchet 1-58260-3766 Repair Kit, Non-Branded

Head Ratchet 1-58260-4783 Disposable Ear Plugs, Uncorded 2-80260-4785 Disposable Ear Plugs, Corded 2-80261-0022 Battery Charger 22--6699261-0024 Rechargeable Batteries, AA 22--6699261-0114 Absorbent Mat, 30 in x 50 ft 2-99261-0115 High Visibility Yellow Mat 22--110000261-0443 Adapter, 1/4 in female to

3/8 in male 1-9, 1-22261-0444 Plug Socket, 1/2 in Female to

3/8 in Male 1-2, 1-5, 1-6, 1-15, 1-22, 1-54261-0445 Adapter, 3/4 in Female to

1/2 in Male 1-22261-0446 Replacement Bit 1-22261-0447 Adapter Replacement Bit 1-22261-0448 Adapter Replacement Bit 1-22261-6665 Threaded Rod, Bulk, 1/4-20 2-130261-6666 Threaded Rod, Bulk, 5/16-18 2-130261-6667 Threaded Rod, Bulk, 3/8-16 2-130261-6668 Threaded Rod, Bulk, 7/16-14 2-130261-6669 Threaded Rod, Bulk, 1/2-13 2-130261-6670 Threaded Rod, Bulk, 5/8-11 2-130261-6671 Threaded Rod, Bulk, 3/4-10 2-130261-7012 Yellow Paint High Heat,

High Gloss, Aerosol Can 3-38261-7013 Yellow Paint, High Heat,

High Gloss 1 gal Can 3-38261-8322 Plug Strip Surge Suppression 22--7700261-8569 Adapter, 1 in Female to

1 1/2 in Male 1-22261-8570 Adapter, 1 in Female to 1 in Male 1-22261-8571 Individual Sockets 1-19261-8572 Metric Swivel Impact Socket Set,

7 Piece, 3/8 in Drive 11--3300261-8573 Socket, 10.0 mm 1-30261-8574 Socket, 12.0 mm 1-30261-8575 Socket, 13.0 mm 1-30261-8576 Socket, 14.0 mm 1-30261-8577 Socket, 15.0 mm 1-30

261-8578 Socket, 17.0 mm 1-30261-8579 Socket, 18.0 mm 1-30261-8581 Universal Impact Socket Set,

7 Piece, 3/8 in Drive 11--1144261-8583 Socket , 50.0 mm 1-14261-8585 Socket, 50.0 mm 1-14261-8586 Socket, 54.1 mm 1-14261-8587 Socket, 55.6 mm 1-14261-8589 Socket, 57.2 mm 1-14261-8590 Socket, 64.3 mm 1-14261-8591 Socket, 65.8 mm 1-14262-2758 Heavy Duty Box Wrench, 20 mm 1-59262-2759 Heavy Duty Box Wrench, 30 mm 1-59262-4861 Safety Shields, Clip-on, Glasses 22--8877262-4862 Triangular Highway Warning Kit 22--111122262-4864 Safety Glasses, Aviator-Style,

gray lens 2-86262-4865 Safety Glasses, Flip-Up 22--8877262-4866 High Filtration Dust Mask 22--8822262-4868 Brass Bristle Cleaning Brush 2-5262-6726 Reaction Blank 1-62262-6728 Reaction Blank 1-62262-9176 Safety Vest, Orange 2-90262-9301 Safety Vest, Lime Green 2-90262-9304 Tie Down Strap, 15" 2-111262-9305 Tie Down Strap, 21" 2-111262-9720 Brush, Cup Knot Double Row, 6" 2-3262-9721 Brush End, Straight Wire, 0.5" 2-3262-9722 Brush End, Straight Wire, 0.75" 2-3262-9723 Brush End, Straight Wire, 1" 2-3262-9724 Brush Cup, Straight Wire, 6" 2-3262-9725 Brush Cup, Knot Single Row, 6" 2-3262-9726 Brush End, Straight Wire, 0.5" 2-3262-9727 Brush End, Straight Wire, 0.75" 2-3262-9728 Brush End, Straight Wire, 1" 2-3262-9729 Brush End, Knot, 0.75" 2-3262-9732 Cloth Shop Rolls, 1 in x 50 yd,

180J Grit 2-23262-9736 Stick-It Disc, PSA, 5" 22--1144262-9737 Cloth Shop Rolls, 1 in x 50 yd,

320J Grit 2-23262-9738 Grinding Wheel, Type 27

Aluminum Oxide 2-17262-9739 Large Flap Wheel Sander, 120 grit 22--1188262-9740 Cloth Shop Rolls, 1 in x 50 yd,

400J Grit 2-23262-9741 Cloth Shop Roll, 2 in x 50 yd 2-23262-9742 Sanding Belt, coarse, 36 grit 2-24262-9743 Sanding Belt, medium, 80 grit 2-24262-9744 Sanding Belt, fine, 120 grit 2-24262-9745 Sanding Belt, super fine, grit 220 2-24262-9746 Carbide Bur, cylindrical, 1/4 x 3/4 in 2-26262-9747 Carbide Bur, 1/2 x 1 in, cylindrical 2-26262-9748 Carbide Bur, 1/4 x 3/4 in, cylindical 2-26262-9749 Nylon Brush 1-56262-9750 Nylon Brush 1-56262-9752 Nylon Brush 1-56262-9959 Tie Wire, 18 gauge 2-111262-9980 Heavy-Duty Hand Pad,

extra coarse 2-22263-0794 Push Broom, 24" wide 2-126263-0796 Broom Handle, 60" 2-126263-0799 Whisk Broom, 15" long 2-126263-0858 Safety Glasses, Aviator-Style,

clear lens 2-86263-0866 Safety Glasses, Zircon-Style 22--8866263-0867 Cleaning Tissues, Glasses 22--8888263-0868 Safety Glasses, Aviator-Style,

clear lens 2-86263-0875 Rain Pants, medium 2-91263-0876 Rain Jacket, medium 2-91263-0877 Double-faced Tape, 2 in x 25 yd 22--111177263-0879 Thread Seal Tape, 0.5 in x 250 ft 22--111177263-0880 Masking Paper 22--112244263-0881 Label Protection Tape 22--111166263-0882 Rain Pants, large 2-91263-0883 Filament Tape, .35 in x 180 ft 22--111177



Part Number Index

263-0884 Paper Cup, 8 oz 22--110088263-0885 Waste Receptacle Liner, 15 gal 2-126263-0886 Waste Receptacle Liner, 33 gal 2-126263-0887 Waste Receptacle Liner, 55 gal 2-126263-0888 Rain Jacket, large 2-91263-0891 Poly Coat Paper 22--112244263-0892 Hard Roll Paper Towels 22--110077263-0895 Rain Pants, XL 2-91263-0967 Rain Jacket, XL 2-91263-1019 Shelf Ladder, 6 ft 2-127263-1022 Shelf Ladder, 8 ft 2-127263-1030 Step Ladder, 4 ft 2-127263-1031 Step Ladder, 8 ft 2-127263-3341 Flex Head Ratchet, 1/2 in Drive 1-20263-3817 Hammer Handle, 12 in 1-46263-3819 Hammer Handle, 16 in 1-46263-3820 Hammer Handle, 18 in 1-46263-3821 Hammer Handle, 30 in 1-46263-3822 Hammer Handle, 36 in 1-46263-6148 Paint and Decal Remover 3-40263-6151 Paint and Decal Remover 3-40263-7140 Thread Insert Kit, 1-8 1-77263-7141 Thread Insert Kit, M24 1-77263-7142 Thread Insert Kit, M30 1-77263-7144 Thread Insert Kit, M36 1-77263-7145 Thread Insert Kit, M20 1-77263-7146 Thread Repair Solid Plug Insert Kit 1-77263-7147 Crack Repair Kit, General Purpose 11--7788263-7155 Rough Tap 1-77263-7156 Finish Tap 1-77263-7157 Rough Tap 1-77263-7158 Finish Tap 1-77263-7160 Drill Bit, 1 9/16 in 1-77263-7161 Rough Tap 1-77263-7162 Finish Tap 1-77263-7163 Installation Tool 1-77263-7164 Thread Insert, M36 1-77263-7165 Installation Tool 1-77263-7167 Installation Tool 1-77263-7168 Thread Insert, M24 1-77263-7170 Installation Tool 1-77263-7172 Drill Bit, 1 41/64 in 1-77263-7173 Thread Insert, 1-8, M30 1-77263-7174 Thread Insert, M20 1-77263-7175 Solid Plug Insert 1-77263-7177 Spotfacer 1-77263-7178 Drill Bit, 1 25/64 in 1-77263-7179 Drill Fixture 1-77263-7180 Drill Bit, 57/64 in 1-77263-7181 Rough Tap 1-77263-7182 Finish Tap 1-77263-7183 Installation Tool 1-77263-7184 Magcheck Kit 1-78263-7190 Pneumatic Tapping Tool 1-78263-7193 Stitch Pin, 6.3 mm (.250 in) length 1-78263-7194 Stitch Pin, 9.5 mm (.375 in) length 1-78263-7195 Stitch Pin, 15.9 mm (.625 in) length 1-78263-7196 Stitch Pin, 25.4 mm (1.00 in) length 1-78263-7197 Drill Bit, wire size 7 1-78263-7198 Starting Tap 1-78263-7199 Bottom Tap 1-78263-7200 Piloted Tap 1-78263-7201 Drilling Jig 1-78263-7202 Stitch Pin, 6.3 mm (.250 in) length 1-78263-7203 Stitch Pin, 12.7 mm (.500 in) length 1-78263-7204 Stitch Pin, 25.4 mm (1.00 in) length 1-78263-7205 Starting Tip 1-78263-7206 Bottom Tap 1-78263-7207 Piloted Tap 1-78263-7208 Drill Bit, letter size L 1-78263-7209 Stitch Pin, 6.3 mm (.250 in) length 1-78263-7210 Stitch Pin, 9.5 mm (.375 in) length 1-78263-7211 Stitich Pin, 12.7 mm (.500 in) length 1-78263-7212 Stitch Pin, 19 mm (.750 in) length 1-78263-7213 Stitch Pin, 28.6 mm (1.125 in) length 1-78263-7215 Finishing Tap, fine 1-78263-7216 Bottom Tap, fine 1-78

263-7217 Spotfacer 1-78263-7218 Drill Shop 1-78263-7219 Stitich Pin, 15.9 mm (.625 in) length 1-78263-7220 Stitch Pin, 22.2 mm (.875 in) length 1-78263-7221 Stitich Pin, 34.9 mm (1.375 in) length 1-78263-7222 Stitch Pin, 50.8 mm (2.00 in) length 1-78263-7223 Rough Tap 1-78263-7224 Bottom Tap 1-78263-7225 Bottom Tap 1-78263-7226 Drill Bit, Letter size 0 1-78263-7227 Spotfacer 1-78263-7228 Drill Stop 1-78263-7230 Lock, 3.2 mm (.125 in) thick 1-78263-7232 Drill Bit, wire size 15 1-78263-7233 Drill Stop 1-78263-7234 Drilling Jig 1-78263-7235 Bottom Lock, 2 mm (.080 in) thick 1-78263-7236 Surface Lock, 4 mm (.160 in) thick 1-78263-7238 Drill Bit Set, 1/8 and 3/16 in 1-78263-7239 Drilling Jig 1-78263-7240 Drill Stop, 1/8 in 1-78263-7241 Drill Stop, 3/16 in 1-78263-7242 Bottom Lock, 5 mm (.190 in) thick 1-78263-7243 Surface Lock, 9.5 mm (.375 in) thick 1-78263-7244 Drill Bit Set, 1/8 and 1/4 in 1-78263-7245 Drilling Jig 1-78263-7246 Drill Stop, 1/4 in 1-78263-7249 Trim-Kut 3 inch Discs

(includes 1/4 in mandrel) 1-78263-7250 Drilling Jig 1-78263-7251 Drilling Jig 1-78263-7253 Large Collet for 263-7190 1-78263-7254 Quick Change Tap Adapter 1-78263-7255 Rough Tap 1-77263-7256 Finish Tap 1-77263-7258 Tapping Fluid 1-77263-7259 Thread Sealant 1-77263-7260 Drill Bit, 21/32 in 1-77263-9067 File, Aluminum, 10" 2-27263-9069 File, Half Round Bastard, 10" 2-27263-9070 File, Mill Bastard, 8" 2-27263-9071 File, Round, 8" 2-27263-9072 File, Slim Taper, 6" 2-27263-9074 File, Mill Bastard, 6" 2-27263-9075 File Handle, Wood, files 6-8" 2-27263-9076 File Handle, Wood, files 8-10" 2-27264-0414 File Set, 8 piece 22--2277264-4352 Nylon Cleaning Brush 2-4264-4353 Razor Blades, Single Edge 22--2277264-4355 Nylon Cleaning Brush 2-4264-4356 Spray Bottle, Plastic 33--2277264-4357 Nylon Cleaning Brush 2-4264-4358 Nylon Cleaning Brush 2-4264-4359 Parts Cleaning Brush 2-5264-4360 Janitorial Bucket, 35 qt 2-126264-4361 Mop Head, Rayon 2-126264-4363 Mop Head, Cotton 2-126264-4364 Mop Handle 2-126264-4372 Nylon Cleaning Brush 2-4265-2255 All-Purpose Wipers, 12 x 13 in 22--110055265-2256 Low Lint Task Wipers, 8 x 8 in 22--110066, 3-9266-2281 Nylon Cleaning Brush 2-4266-2282 Nylon Cleaning Brush 2-4266-2283 Nylon Cleaning Brush 2-4266-3144 Epoxy Mixer Cup Kit 33--55266-3452 Emery Paper 22--2233266-3736 Impact Wrench, 1/2 in 1-66, 1-67, 1-68266-3737 Impact Wrench, 3/8 in 1-66, 1-67, 1-68266-8562 Ultra 5Moly Grease, Grade 1,

metal pail, 16 kg 3-21266-8563 Ultra 5Moly Grease, Grade 2,

metal pail, 16 kg 3-21266-8564 Ultra 5Moly Grease, Grade 1,

tote, 1588 kg 3-21267-6532 Manufactured Rags 22--110066, 2-107267-6535 Manufactured Pop-up Rags,

white 2-106, 2-107

267-6536 Manufactured Pop-up Rags, blue 2-106, 2-107

267-8539 Tyvek Coveralls, large 2-91267-8540 Tyvek Coveralls, medium 2-91267-8541 Tyvek Coveralls, small 2-91267-8542 Tyvek Coveralls, X large 2-91267-8543 Tyvek Coveralls, XX large 2-91267-8544 Tyvek Coveralls, XXX large 2-91267-8545 Tyvek Coveralls, XXXX large 2-91268-5809 Funnel Kit 22--111155268-5814 Funnel, Plastic, 18 in 22--111155268-8709 Fiber Disc, 16 grit 2-12268-8795 Split Leather Palm Gloves 22--9933269-1928 Carpet/Upholstry Cleaner 3-11269-1937 Gojo Lemon with Pumice

Hand Cleaner 3-36269-1939 Zep Cherry Bomb Hand Cleaner 3-36269-1941 Ice-A-Way Rock Salt 3-37269-1942 Wasp and Hornet Killer 3-37269-1943 Loctite Quickmetal 3-3269-1944 CT2 Air Tool Oil/Lubricant 3-25269-1948 Cascade Pure Rinse

Dishwasher Soap 3-37269-1949 CT2 Diesel Fuel Winterizer/Antigel 3-35269-1950 Ice Foe 3-37269-1971 Natural Gas Engine Oil, Low Ash,

EL350, 40 3-16269-3123 Pen Light, Blue LED 22--6688269-3368 Dispenser, White Metal 2-106, 2-107269-7255 Cloth Shop Rolls, 1 in x 50 yd, 80J 2-23269-7256 Cloth Shop Rolls, 1 in x 50 yd,

100J Grit 2-23269-7257 Cloth Shop Rolls, 1 in x 50 yd,




500J Grit 2-23269-8271 Arm and Hammer Baking Soda 3-37269-8292 Heet Gasoline Fuel Additive 3-34269-8297 Chemtool LAC 110 All-Purpose

Cleaner Concentrate 3-11270-5329 Gusseted Heat Shrink Bag,

800 x 495 x 710 mm 2-121270-5331 Gusseted Heat Shrink Bag,

1257 x 495 x 1370 mm 2-121270-5332 Flat Heat Shrink Bag,

2438 x 2970 mm 2-121270-5333 Flat Heat Shrink Bag,

3810 x 2970 mm 2-121270-5334 Heat Shrink Sheeting, 7 mil white 2-121270-5335 Heat Shrink Sheeting, 5 mil, clear 2-121270-5336 Heat Shrink Sheeting, 1.37 x 198 m 2-121270-5337 Plastic Bag with Cat Logo,

305 x 457 mm 2-122270-5338 Plastic Bags with Cat Logo,

457 x 710 mm 2-122270-5339 Plastic Bags with Cat Logo,

610 x 813 mm 2-122270-5341 Zipper-Top, Clear Bags for

Contamination Control, 203 x 178 mm 2-122

270-5342 Zipper-Top, Clear Bags forContamination Control, 229 x 305 mm 2-122

270-5343 Steel Strapping 2-122270-5344 Strapping Seals 2-123270-5345 Nylon Cord Strapping 2-123270-5346 Heavy Duty Garbage Bags 2-127270-5347 Dust Cap for 55 gal Drum 2-108270-5348 Cardboard Box with Cat Logo,

213 x 213 x 210 mm 2-122270-5349 Cardboard Box with Cat Logo,

254 x 203 x 170.8 mm 2-122


Part Number Index


270-5350 Cardboard Box with Cat Logo, 300 x 300 x 190 mm 2-122




271-1648 Xtreme Windshield Washer Fluid 3-9271-4600 Impact Socket Set, 12 Piece,

3/8 in Drive 11--1111271-4601 Impact Socket, 5/16 in 1-11, 1-17271-4602 Impact Socket, 3/8 in 1-11, 1-17271-4603 Impact Socket, 7/16 in 1-11, 1-17271-4604 Impact Socket, 1/2 in 1-11, 1-17271-4605 Impact Socket, 9/16 in 1-11, 1-17271-4606 Impact Socket, 5/8 in 1-11, 1-17271-4607 Impact Socket, 11/16 in 1-11, 1-17271-4608 Impact Socket, 3/4 in 1-11, 1-17271-4609 Impact Socket, 13/16 in 1-11, 1-17271-4610 Impact Socket, 7/8 in 1-11, 1-17271-4611 Impact Socket, 15/16 in 1-11, 1-17271-4612 Impact Socket, 1 in 1-11, 1-17271-4613 Impact Socket Set, 7 Piece,

3/8 in Drive 11--1111271-4615 Impact Socket, 3/8 in 1-11, 1-17271-4616 Impact Socket, 7/16 in 1-11, 1-17271-4617 Impact Socket, 1/2 in 1-11, 1-17271-4618 Impact Socket, 9/16 in 1-11, 1-17271-4619 Impact Socket, 5/8 in 1-11, 1-17271-4620 Impact Socket, 11/16 in 1-11, 1-17271-4621 Impact Socket, 3/4 in 1-11, 1-17271-4622 Impact Socket Set, 14 Piece,

3/8 in Drive 11--2277271-4623 Impact Socket, 8 mm 1-27, 1-32271-4624 Impact Socket, 9 mm 1-27, 1-32271-4625 Impact Socket, 10 mm 1-27, 1-32271-4626 Impact Socket, 11 mm 1-27, 1-32271-4627 Impact Socket, 12 mm 1-27, 1-32271-4628 Impact Socket, 13 mm 1-27, 1-32271-4630 Impact Socket, 14 mm 1-27, 1-32271-4631 Impact Socket, 15 mm 1-27, 1-32271-4632 Impact Socket, 16 mm 1-27, 1-32271-4633 Impact Socket, 17 mm 1-27, 1-32271-4634 Impact Socket, 18 mm 1-27, 1-32271-4635 Impact Socket, 19 mm 1-27, 1-32271-4636 Impact Socket, 21 mm 1-27, 1-32271-4637 Impact Socket, 24 mm 1-27, 1-32271-4638 Impact Socket Set, 14 Piece,

3/8 in Drive 11--2288271-4639 Impact Socket, 8 mm 1-28, 1-33271-4640 Impact Socket, 9 mm 1-28, 1-33271-4641 Impact Socket, 10 mm 1-28, 1-33271-4642 Impact Socket, 11 mm 1-28, 1-33271-4643 Impact Socket, 12 mm 1-28, 1-33271-4644 Impact Socket, 13 mm 1-28, 1-33271-4645 Impact Socket, 14 mm 1-28, 1-33271-4646 Impact Socket, 15 mm 1-28, 1-33271-4647 Impact Socket, 16 mm 1-28, 1-33271-4648 Impact Socket, 17 mm 1-28, 1-33271-4650 Impact Socket, 18 mm 1-28, 1-33271-4651 Impact Socket, 19 mm 1-28, 1-33271-4652 Impact Socket, 21 mm 1-28, 1-33271-4653 Impact Socket, 24 mm 1-28, 1-33271-4654 Impact Socket Set, 14 Piece,

3/8 in Drive 11--2288271-4655 Impact Socket, 8 mm 1-28, 1-32271-4656 Impact Socket, 10 mm 1-28, 1-32271-4657 Impact Socket, 11 mm 1-28, 1-32271-4658 Impact Socket, 12 mm 1-28, 1-32271-4659 Impact Socket, 13 mm 1-28, 1-32271-4660 Impact Socket, 14 mm 1-28, 1-32271-4661 Impact Socket, 15 mm 1-28, 1-32271-4662 Impact Socket, 16 mm 1-28, 1-32271-4663 Impact Socket, 17 mm 1-28, 1-32271-4664 Impact Socket, 18 mm 1-28, 1-32271-4665 Impact Socket, 19 mm 1-28, 1-32

271-4666 Impact Socket, 20 mm 1-28, 1-32271-4667 Impact Socket, 21 mm 1-28, 1-32271-4668 Impact Socket, 22 mm 1-28, 1-32271-4669 Impact Socket Set, 12 Piece,

3/8 in Drive 11--1111271-4670 Impact Socket, 5/16 in 1-11, 1-17271-4671 Impact Socket, 3/8 in 1-11, 1-17271-4672 Impact Socket, 7/16 in 1-11, 1-17271-4673 Impact Socket, 1/2 in 1-11, 1-17271-4674 Impact Socket, 9/16 in 1-11, 1-17271-4675 Impact Socket, 5/8 in 1-11, 1-17271-4676 Impact Socket, 11/16 in 1-11, 1-17271-4677 Impact Socket, 3/4 in 1-11, 1-17271-4678 Impact Socket, 13/16 in 1-11, 1-17271-4679 Impact Socket, 7/8 in 1-11, 1-17271-4680 Impact Socket, 15/16 in 1-11, 1-17271-4681 Impact Socket, 1 in 1-11, 1-17271-4683 Impact Socket Set, 14 Piece,

3/8 in Drive 11--2288271-4684 Impact Socket, 8 mm 1-28, 1-32271-4685 Impact Socket, 9 mm 1-28, 1-32271-4686 Impact Socket, 10 mm 1-28, 1-32271-4687 Impact Socket, 11 mm 1-28, 1-32271-4688 Impact Socket, 12 mm 1-28, 1-32271-4689 Impact Socket, 13 mm 1-28, 1-32271-4690 Impact Socket, 14 mm 1-28, 1-32271-4691 Impact Socket, 15 mm 1-28, 1-32271-4692 Impact Socket, 16 mm 1-28, 1-32271-4693 Impact Socket, 17 mm 1-28, 1-32271-4694 Impact Socket, 18 mm 1-28, 1-32271-4695 Impact Socket, 19 mm 1-28, 1-32271-4696 Impact Socket, 21 mm 1-28, 1-32271-4697 Impact Socket, 24 mm 1-28, 1-32271-4700 Wrench Organizer 1-23271-4722 Socket Extension, 3 in 1-21271-4723 Socket Extension, 1/2 in Drive 1-21271-4724 Socket Extension, 11 in 1-21272-1208 Slide Sledge Heavy Equipment

Repair Tool w/ 272-1237 Pin Driver, 9 lb, 30 in 1-47

272-1212 Slide Sledge Heavy Equipment Repair Tool w/ 272-1237 Pin Driver, 13 lb, 46 in 1-47



272-1222 Tie Rod/Ball Joint Separator 3 Tip Set 1-48

272-1223 Tie Rod/Ball Joint Splitter Adapter 1-48272-1224 Tie Rod/Ball Joint Separator Fork,

11/16 in 1-48272-1225 Tie Rod/Ball Joint Separator Fork,

15/16 in 1-48272-1226 Tie Rod/Ball Joint Separator Fork,

1 1/8 in 1-48272-1227 Tie Rod/Ball Joint Separator Fork,

1 7/16 in 1-48272-1228 Pin Driver, 1/2 in diameter 1-48272-1230 Pin Driver, 7/8 in diameter 1-48272-1233 Pin Driver, 1 1/4 in diameter 1-48272-1237 Pin Driver, 2 in diameter 1-47, 1-48272-1239 Pin Driver, 2 1/2 in diameter 1-48272-1240 Pin Driver, 3 in diameter 1-48272-1241 Curved Chisel Tip, 1 3/8 1-48272-1242 Ripper Tooth Pin Inserter,

3/4 in diameter 1-48272-1243 Ripper Tooth Pin Remover,

3/4 in diameter 1-48272-1244 Ripper Tooth Pin Inserter,



3/8 in diameter 1-48

272-1247 Ripper Tooth Pin Inserter, 3/8 in diameter 1-48

272-1248 Heavy Equipment Bushing Drive 1-48272-1249 Race/Bearing/Seal Adapter 1-48272-1250 Bushing Driver Adapter 1-48272-1251 Scarifier Tooth Tip 1-48272-1252 Utility Wedge Tip 1-48272-1253 5 Pound Handle Weight 1-48272-3217 Natural Gas Engine Oil, Low Ash,

EL350, 40 3-16272-5745 CT2 Antifreeze and Rust Guard 3-35273-3527 Heavy Nylon Tool Bag with

Interior Pockets, 38 in long 1-48273-3528 Heavy Nylon Tool Bag with

Interior Pockets, 52 in long 1-48273-3529 Hard Shell Tool Case with

Custom Foam and Wheels 1-48275-5264 Hook & Loop Sanding Pads,

127 mm, (5 in) dia. 2-15275-5265 Hook & Loop Sanding Pads,

152.4 mm, (6 in) dia. 2-15275-5266 Hook & Loop Sanding Pads,

203.2 mm, (8 in) dia. 2-15275-5709 Natural Gas Engine Oil, Low Ash,

EL350, 40 3-16276-0487 Fingerless Gloves, Size M 2-92276-0488 Fingerless Gloves, Size L 2-92276-0489 Fingerless Gloves, Size XL 2-92276-0490 Fingerless Gloves, Size 2X 2-92276-0491 Utility Gloves, 6 Pair, Size, Medium 2-92276-0492 Utility Gloves, 6 Pair, Size, Large 2-92276-0493 Utility Gloves, 6 Pair, Size, XL 2-92276-0494 Utility Gloves, 6 Pair, Size, XXL 2-92276-0495 Insulated Gloves, Size M 2-92276-0496 Insulated Gloves, Size L 2-92276-0497 Insulated Gloves, Size XL 2-92276-0498 Insulated Gloves, Size XL 2-92276-0499 Impact Gloves, Size M 2-92276-0500 Impact Gloves, Size L 2-92276-0501 Impact Gloves, Size XL 2-92276-0502 Impact Gloves, Size 2X 2-92276-0731 Tapered Dual-Function Cap/Plug 2-51276-0740 Tapered Dual-Function Cap/Plug 2-51276-0741 Tapered Dual-Function Cap/Plug 2-51276-0742 Tapered Dual-Function Cap/Plug 2-51276-0743 Tapered Dual-Function Cap/Plug 2-51276-0744 Tapered Dual-Function Cap/Plug 2-51276-0745 Tapered Dual-Function Cap/Plug 2-51276-0746 Tapered Dual-Function Cap/Plug 2-51276-0747 Tapered Dual-Function Cap/Plug 2-51276-0748 Tapered Dual-Function Cap/Plug 2-51276-0749 Tapered Dual-Function Cap/Plug 2-51276-0750 Tapered Dual-Function Cap/Plug 2-51276-0751 Tapered Dual-Function Cap/Plug 2-51276-0752 Tapered Dual-Function Cap/Plug 2-51276-0753 Tapered Dual-Function Cap/Plug 2-51276-0754 Tapered Dual-Function Cap/Plug 2-51276-0755 Tapered Dual-Function Cap/Plug 2-51276-0756 Tapered Dual-Function Cap/Plug 2-51276-0757 Tapered Dual-Function Cap/Plug 2-51276-0758 Tapered Dual-Function Cap/Plug 2-52276-0759 Tapered Dual-Function Cap/Plug 2-52276-0760 Tapered Dual-Function Cap/Plug 2-52276-0761 Tapered Dual-Function Cap/Plug 2-52276-0762 Tapered Dual-Function Cap/Plug 2-52277-8790 Round Shank Screwdrivers,

Standard Tip 1-2, 1-45279-2267 Cutting and Polishing Disc 2-9280-1555 DYKEM Hi Spot Bluring Paste 3-37280-2675 Anvil 1-66, 1-67, 1-68280-2676 Motor and Throttle

Repair Kit, 3/8 in 1-66, 1-67, 1-68280-2677 Anvil Repair Kit, 3/8 in 1-66, 1-67, 1-68280-2678 Anvil 1-66, 1-67, 1-68280-2679 Motor and Throttle

Repair Kit, 1/2 in 1-66, 1-67, 1-68280-2680 Anvil Repair Kit, 1/2 in 1-66, 1-67, 1-68



Part Number Index

280-2681 Anvil Repair Kit, 3/8 in 1-66, 1-67, 1-68280-2682 Anvil 1-66, 1-67, 1-68280-2683 Anvil 1-66, 1-67, 1-68280-2684 Anvil 1-66, 1-67, 1-68280-8144 Ultraviolet Spot Bulb, 120V/100W 3-24280-8147 Ultraviolet Spot Bulb, 120V/100W 3-24281-8271 Hook & Loop Sanding Discs,

5 in, 100 Grit 2-15281-8272 Hook & Loop Sanding Discs,





8 in, 80 Grit 2-15282-2108 Extractor Set, 10 piece 22--4466282-2109 Extractor, 1/8 in pipe, 3/8 in stud 2-46282-2110 Extractor, 1/4 in pipe, 1/2 in stud 2-46282-2111 Extractor, 3/8 in pipe,

5/8 or 3/4 in stud 2-46282-2112 Extractor, 1/2 in pipe 2-46282-2113 Extractor, 7/8 or 1 in stud 2-46282-2115 Extractor, 3/4 in pipe,

1 1/8 or 1 1/4 in stud 2-46282-2116 Extractor, 1 in pipe,

1 1/2 or 1 3/4 in stud 2-46282-2117 Extractor, 1 1/4 in pipe, 2 in stud 2-46282-2118 Extractor, 1 1/2 in pipe,

2 1/4 or 2 1/2 in stud 2-46282-2119 Extractor, 2 in pipe,

3 or 3 1/2 in stud 2-46283-1709 Diesel Engine Oil, 10W-30 3-14283-3425 Diesel Engine Oil, 15W-40 3-14283-3494 Transmission/Drive Train Oil, 30 3-17283-3495 Transmission/Drive Train Oil, 50 3-17285-1145 Combination Padlock 22--9977285-1146 Combination Padlock 22--9977285-1147 High Security Brass Padlock 22--9977285-1148 High Security Brass Padlock 22--9977285-1149 High Security Brass Padlock 22--9977285-1150 High Security Brass Padlock 22--9977287-2075 Small Tire Bead Breaker 1-48287-2076 Large Tire Bead Breaker 1-48288-2512 Heavy-Duty Angle Grinder 11--7755288-4209 DRC Quarter-Fold Wipes 22--110044288-4210 DRC Pop-Up Shop Towels, White 2-104288-4211 DRC Pop-Up Shop Towels, Blue 2-104288-4212 DRC Center-Pull Roll

Dry Shop Towels 22--110044291-3866 Diesel Engine Oil,

Ultra Low Sulfer (ULS) 3-15291-3868 Diesel Engine Oil,

Ultra Low Sulfer (ULS) 3-15291-3869 Diesel Engine Oil,

Ultra Low Sulfer (ULS) 3-15291-6710 Stretch Film, Width,

457.2 mm (18 in) 2-121291-6711 Stretch Film, Width,

279.4 mm (11 in) 2-121292-2359 Roller Cabinet, 30 in, black 1-79292-2363 Roller Cabinet, 30 in, red 1-79292-2364 Roller Cabinet, 30 in, blue 1-79292-2365 Roller Cabinet, 450 in, black 1-79292-2366 Roller Cabinet, 45 in, red 1-79292-2367 Roller Cabinet, 45 in, blue 1-79292-2368 Roller Cabinet, 60 in, black 1-79292-2369 Roller Cabinet, 60 in, red 1-79292-2370 Roller Cabinet, 60 in, blue 1-79292-2371 Side Cabinet, black 1-79292-2372 Side Cabinet, red 1-79292-2373 Side Cabinet, blue 1-79292-2380 Hardwood Top for 45 in

Roller Cabinet 1-79

292-2381 Stainless Steel Top for 45 in Roller Cabinet 1-79

292-2422 Hardwood Top for 60 in Roller Cabinet 1-79

292-2423 Stainless Steel Top, 60 inRoller Cabinet 1-79

293-0712 Repair Kit for Breaker Bars 1-20293-2978 Hand Wrap Standard-Duty

Stretch Film 22--112211293-3025 Fractional Hex Key Wrench

Group, Ball End, 1/16 -3/8 in 11--4422293-3026 Metric Hex Key Wrench Group,

Ball End, 1.5-10 mm 11--4422295-2853 Polypropylene Respirator

Cartridge, 4 1/2 in diameter 2-82300-5899 Booster Cable, 20 ft. 2-61301-9696 DRC Jumbo Roll Shop Towels 22--1100550L-1143 Hex Head Bolt,

3/8-16 x 2 1/2 in, bulk 2-1290L-1329 Hex Head Bolt,

1/2-13 x 3 in, bulk 2-1290L-2070 Hex Head Bolt,

3/8-16 x 2 1/4 in, bulk 2-1290S-0509 Hex Head Bolt,

3/8-16 x 3/4 in, bulk 2-1290S-1566 Hex Head Bolt,







3/8-16 x 2 in, bulk 2-1290S-1591 Hex Head Bolt,














5/8-11 x 2 1/2 in, bulk 2-1290T-0065 Tube Assy Air-Reg. Torque

Wrench Bolt 1-610T-0573 Hex Head Bolt,

3/8-16 x 2 3/4 in, bulk 2-1290V-0455 Hyd. Sys. Testing Wrench 1-411A-1135 Hex Head Bolt, 5/8-11 x 2 in, bulk 2-1291A-1460 Hex Head Bolt, 1/2-13 x 2 in, bulk 2-1291A-2209 Bolt 1-651A-5822 Hex Head Bolt,

1/2-13 x 2 3/4 in, bulk 2-129

1A-5964 Engine Tilt. Gp. Bolt; Torque Wrench Gp. 1-61

1A-8537 Hex Head Bolt, 5/8-11 x 2 3/4 in, bulk 2-129

1A-9579 Hex Head Bolt, 5/16-18 x 1 1/2 in, bulk 2-129

1B-2713 Hex Head Bolt, 1/4-20 x 1 3/4 in, bulk 2-128

1B-2714 Hex Head Bolt, 1/4-20 x 2 1/2 in, bulk 2-128

1B-4367 Hex Head Bolt, 5/8-11 x 3 in, bulk 2-1291B-4657 Special Large Socket Wrench,

3/4" Drive 1-431B-5170 Pipe-Square Drive Plugs,

Thread 1 1/4"-11 1/2" 2-501B-5174 Steering Lines Adapter G. Plug 2-501B-7182 Hex Head Bolt,

5/16-18 x 1 1/4 in, bulk 2-1291B-7412 Special Open End Wrench, 3 1/2" 1-411B-7763 Pump Oil Can 22--1111551B-7810 Ball Peen Hammer, 1 5/32" 1-8, 1-461B-9575 Hex Head Bolt,

5/16-18 x 1 3/4 in, bulk 2-1291B-9660 Feeler Gauge, 6 Blade 1-531B-9925 Left Hand Spiral Screw Extractor 22--44551C-0569 Hex Head Bolt,

5/16-18 x 1/2 in, bulk 2-1281D-4533 Hex Head Bolt,

1/4-20 x 2 1/4 in, bulk 2-1281D-4538 Hex Head Bolt,




5/16-18 x 3 in, bulk 2-1291F-1159 Punch Center, 56" Long 1-2, 1-3, 1-531F-1160 Chisel, 3/8" Edge,

5 1/2" Long 1-2, 1-3, 1-531F-1161 Chisel, 3/4" Edge,

7" Long 1-2, 1-3, 1-531F-7958 Full Nut, 1/2-13, bulk 2-1291H-8134 Ring 1-651H-9456 Hex Head Bolt,

5/8-11 x 3/4 in, bulk 2-1291J-9671 Hyd. Sys. Test O-ring Seal 2-491K-6705 Hex Head Bolt,

1/2-13 x 1/2 in, bulk 2-1291N-5998 Straight Thread O-ring-Hex Head

Plugs, 1 7/8-12 2-491N-5999 Straight Thread O-ring-Hex Head

Plugs, 3/8-24 2-491P-0545 Tire Pressure Gauge

Group 1-4, 1-5, 1-6, 1-7, 1-81P-0551 Filter Strap Wrench Spring Pin 1-401P-0808 Multipurpose Grease,

cartridge, 397 g 3-211P-0810 Electrical Tape 22--1111881P-0850 Base Unit Multiplier 1-231P-0853 Torque Multiplier Ratchet Adapter 11--22331P-1853 Int. Retaining Ring Pliers, A/C 1-521P-1854 Retaining Ring Pliers,

No. 2190, Right Angle Tip 1-521P-1855 Retaining Ring Pliers,

No. 22, Straight Tip 1-521P-1856 Retaining Ring Pliers,

No. 22-90, Right Angle Tip 1-521P-1857 A/C Compressor Repair TG Pliers 1-521P-1858 Retaining Ring Pliers,

No. 23-90, Right Angle Tip 1-521P-1859 A/C Compressor Repair TG Pliers 1-521P-1860 Retaining Ring Pliers,

No. 24-90, Right Angle Tip 1-521P-1861 Retaining Ring Pliers,

No. 25, Straight Tip 1-52


Part Number Index


1P-1862 Retaining Ring Pliers, No. 25-90, Right Angle Tip 1-52

1P-1863 Ext. Retaining Ring Pliers, A/C 1-521P-1864 Retaining Ring Pliers,

No. 26-90, Right Angle Tip 1-521P-2382 Adapter, 1/2" Drive,

3/4" 12 Point Box End 1-591P-2851 Spanner Wrench 1-411P-2852 Spanner Wrench 1-411P-2853 Spanner Wrench 1-8, 1-411P-2854 Spanner Wrench 1-411P-2855 Spanner Wrench Group 1-411P-2856 Spanner Wrench 1-411P-2874 Roll Set Rivet (for 1/4" rivets) 1-531P-2979 Rethreading Fractional Die,

Hexagon 2-331P-2980 Rethreading Fractional Die,



















Hexagon 2-33, 2-341P-2999 Case 2-331P-3000 Rethreading Fractional Die Set,

Hexagon 2-331P-3001 Hand Tap, Machine Screw, Plug 2-311P-3002 Hand Tap, Machine Screw, Plug 2-311P-3003 Hand Tap, Machine Screw, Plug 2-311P-3004 Hand Tap, Machine Screw, Plug 2-311P-3005 Hand Tap, Machine Screw, Plug 2-311P-3006 Hand Tap, Machine Screw, Plug 2-311P-3007 Hand Tap, Machine Screw, Plug 2-311P-3008 Hand Tap, Machine Screw, Plug 2-311P-3009 Hand Tap, Machine Screw, Plug 2-311P-3010 Hand Tap, Machine Screw, Plug 2-311P-3011 Hand Tap, Machine Screw, Plug 2-311P-3012 Hand Tap, Machine Screw, Plug 2-311P-3013 Hand Tap, Machine Screw, Plug 2-311P-3014 Hand Tap, Machine Screw, Plug 2-311P-3015 Hand Tap, Machine Screw, Plug 2-311P-3016 Hand Tap, Machine Screw, Plug 2-311P-3017 Hand Tap, Machine Screw, Plug 2-311P-3018 Hand Tap, Machine Screw, Plug 2-311P-3019 Hand Tap, Machine Screw, Plug 2-311P-3020 Tap Group - Machine 2-31

1P-3021 Hand Tap, Fractional Size, Plug 2-321P-3022 Hand Tap, Fractional Size, Plug 2-321P-3023 Hand Tap, Fractional Size, Plug 2-321P-3024 Hand Tap, Fractional Size, Plug 2-321P-3025 Hand Tap, Fractional Size,

Plug 2-32, 2-421P-3026 Hand Tap, Fractional Size, Plug 2-321P-3027 Hand Tap, Fractional Size,




Plug 2-32, 2-421P-3034 Hand Tap, Fractional Size, Plug 2-321P-3035 Hand Tap, Fractional Size, Plug 2-321P-3036 Hand Tap, Fractional Size,


Plug 2-32, 2-421P-3039 Hand Tap, Fractional Size, Plug 2-321P-3040 Hand Tap, Fractional Size, Plug 2-321P-3041 Hand Tap, Fractional Size,

Plug 2-32, 2-421P-3042 Linkage Pin R&I Tap,

1-1/4"-12 Thd 2-32, 2-421P-3043 Hand Tap, Fractional Size,

Plug 2-32, 2-421P-3044 Linkage Pin R&I Tap,

1-1/2"-12 Thd 2-32, 2-421P-3047 Wrench, Straight Tap, 11" 2-32, 2-361P-3048 Straight Tap Wrench 2-32, 2-361P-3050 Tap Set, Fractional Size 2-321P-3070 Tap Set, Fractional Size 2-321P-3501 Wrench, Open End, 3/8" 1-251P-3502 Wrench, Open End, 7/16" 1-251P-3503 Wrench, Open End, 1/2" 1-251P-3504 Wrench, Open End, 9/16" 1-251P-3505 Wrench, Open End, 5/8" 1-251P-3506 Wrench, Open End, 11/16" 1-251P-3507 Wrench, Open End, 3/4" 1-251P-3508 Wrench, Open End, 13/16" 1-251P-3509 Wrench, Open End, 7/8" 1-251P-3510 Wrench, Open End, 15/16" 1-251P-3511 Wrench, Open End, 1" 1-251P-3512 Wrench, Open End, 1 1/16" 1-251P-3513 Wrench, Open End, 1 1/8" 1-251P-3514 Wrench, Open End, 1 1/4" 1-251P-3515 Wrench Set, Open End,

30° & 60° Offset, 14 Piece 11--22551P-3516 Tool Kit Bag 1-251P-3566 Hyd. Sys. Testing Bit, 9/16" 1-15, 1-431P-3571 HeliCoil Insert Inst. G. Pilot 2-401P-4278 Clamp Hose 2-1291P-5559 Spark Plug Adapter Wrench 11--44441P-7421 Load. Link. Pin Tool Tap (1"-14) 2-321P-7422 Linkage Pin R&I Tap, 2"-12 Thd 2-351P-7460 Mechanical Torque Tester 11--66111P-9369 Adapter Tee 1/8 inch 2-1131S-0253 Combination Wrench,

3/4" (Short) 1-1, 1-3, 1-23, 1-241S-0254 Combination Wrench,

9/16" (Short) 1-1, 1-3, 1-23, 1-241S-0255 Slip Joint Pliers 1-5, 1-6, 1-511S-0257 Ball Peen Hammer, 12 oz. 1-2, 1-3, 1-461S-0258 Soft Face Hammer, 32 oz. 1-2, 1-3, 1-461S-0259 Double Hex Socket,

1/2", 1/2" Drive 1-1, 1-3, 1-4, 1-12, 1-181S-2475 Wrench, 3/4" Sq. Drive 1-541S-9593 Cable Strap 2-1241U-5227 Cable Tie Applicator 2-1241U-5228 Cable Tie Applicator 2-124

1U-5386 Drill Bit, 1/16" 2-291U-5387 Drill Bit, 5/64" 2-291U-5388 Drill Bit, 3/32" 2-291U-5389 Drill Bit, 7/64" 2-291U-5390 Drill Bit, 1/8" 2-291U-5391 Drill Bit, 9/64" 2-291U-5392 Drill Bit, 5/32" 2-291U-5393 Drill Bit, 11/64" 2-291U-5394 Drill Bit, 3/16" 2-291U-5395 Drill Bit, 13/64" 2-291U-5396 Drill Bit, 7/32" 2-291U-5397 Drill Bit, 15/64" 2-291U-5398 Drill Bit, 1/4" 2-291U-5399 Drill Bit, 17/64" 2-291U-5400 Drill Bit, 9/32" 2-291U-5401 Drill Bit, 19/64" 2-291U-5402 Drill Bit, 5/16" 2-291U-5403 Drill Bit, 21/64" 2-291U-5404 Drill Bit, 11/32" 2-291U-5405 Drill Bit, 23/64" 2-291U-5406 Drill Bit, 3/8" 2-291U-5407 Drill Bit, 25/64" 2-291U-5408 Drill Bit, 13/32" 2-291U-5409 Drill Bit, 27/64" 2-291U-5410 Drill Bit, 7/16" 2-291U-5411 Drill Bit, 29/64" 2-291U-5412 Drill Bit, 15/32" 2-291U-5413 Drill Bit, 31/64" 2-291U-5414 Drill Bit, 1/2" 2-291U-5432 Paper Towel Dispenser,

Plastic 2-106, 2-1071U-5490 Heavy-Duty Cleaner

Hydrosolv 4165, 5 gal 3-101U-5512 Cutting and Polishing Roll,

Very Fine, 1" x 30 2-221U-5513 Cutting and Polishing Roll,

Medium, 1" x 30 2-221U-5514 Cutting and Polishing Roll,

Very Fine, 2" x 30 2-221U-5515 Cutting and Polishing Roll,

Medium, 2" x 30 2-221U-5516 Abrasive Disc 2-81U-5517 Roloc Surface Conditioning Disc,

3" Dia. 2-81U-5518 Roloc Thread Shaft Disc Holder 2-8,

2-10, 2-111U-5519 Roloc Disc Holder,

2" Dia 2-8, 2-10, 2-11, 2-131U-5520 Roloc Disc Holder,

3" Dia 2-8, 2-10, 2-11, 2-131U-5536 Crowfoot Wrench, 1-5/16" 1-121U-5545 Combination Wrench Set, 14 Piece,

Metric 1-3, 1-8, 11--33551U-5546 Combination Wrench, 6 mm 1-351U-5547 Combination Wrench, 7 mm 1-351U-5548 High Idle Adjustment Wrench,

8mm 1-7, 1-351U-5549 Combination Wrench, 9 mm 1-351U-5566 Black Light, 110V (Leak Detection) 33--22441U-5567 Leak Detection, Service Parts,

Black Light Filter 3-241U-5568 Leak Detection, Spot Bulb,

110V, 150 Watt 3-241U-5569 Ultraviolet Light Cover 3-241U-5570 Storage Case (Heat Resistant) 3-241U-5571 Ultraviolet Light Absorbing

Spectacles 3-241U-5572 Oil Glo 22 Additive, 1 oz. 3-23, 3-241U-5573 Oil Glo 22 Additive, 1 pt. 3-241U-5574 Gas Glo 32 Additive, 1 oz. 3-241U-5575 Gas Glo 32 Additive, 1 pt. 3-23, 3-241U-5576 Water Glo 23 Additive, 1 oz. 3-241U-5577 Water Glo 23 Additive, 1 pt. 3-241U-5586 Drill Bit, 1/64" 2-281U-5587 Drill Bit, 1/32" 2-281U-5588 Drill Bit, 3/64" 2-281U-5589 Drill Bit, 1/16" 2-28



Part Number Index

1U-5590 Drill Bit 5/64" 2-281U-5591 Drill Bit, 3/32" 2-281U-5592 Drill Bit, 7/64" 2-281U-5593 Drill Bit, 1/8" 2-281U-5594 Drill Bit, 9/64" 2-281U-5595 Drill Bit, 5/32" 2-281U-5596 Drill Bit, 11/64" 2-281U-5597 Drill Bit, 3/16" 2-281U-5598 Drill Bit, 13/64" 2-281U-5599 Drill Bit, 7/32" 2-281U-5600 Drill Bit, 15/64" 2-281U-5601 Drill Bit, 1/4" 2-281U-5602 Drill Bit 17/64" 2-281U-5603 Drill Bit, 9/32" 2-28, 2-411U-5604 Drill Bit, 19/64" 2-281U-5605 Drill Bit, 5/16" 2-281U-5606 Drill Bit, 21/64" 2-28, 2-421U-5607 Drill Bit, 11/32" 2-28, 2-411U-5608 Drill Bit, 23/64" 2-281U-5609 Drill Bit, 3/8" 2-281U-5610 Drill Bit, 25/64" 2-28, 2-421U-5611 Drill Bit, 13/32" 2-28, 2-411U-5612 Drill Bit, 27/64" 2-281U-5613 Drill Bit, 7/16" 2-281U-5614 Drill Bit, 29/64" 2-28, 2-421U-5615 Drill Bit, 15/32" 2-28, 2-411U-5616 Drill Bit, 31/64" 2-281U-5617 Drill Bit, 1/2" 2-281U-5620 Drill Bit, 3/64" 2-291U-5621 Drill Bit, 1/16" 2-291U-5622 Drill Bit, 5/64" 2-291U-5623 Drill Bit, 3/32" 2-291U-5624 Drill Bit, 7/64" 2-291U-5625 Drill Bit, 1/8" 2-291U-5626 Drill Bit, 9/64" 2-291U-5627 Drill Bit, 5/32" 2-291U-5628 Drill Bit, 13/64" 2-291U-5629 Drill Bit, 3/16" 2-291U-5630 Drill Bit, 13/64" 2-29, 2-38, 2-391U-5631 Drill Bit, 7/32" 2-291U-5632 Drill Bit, 15/64" 2-291U-5633 Drill Bit, 1/4" 2-29, 2-391U-5634 Drill bit, 17/64" 2-29, 2-381U-5635 Drill Bit, 9/32" 2-29, 2-391U-5636 Drill Bit, 19/64" 2-291U-5637 Drill Bit, 5/16" 2-291U-5638 Drill Bit, 21/64" 2-29, 2-38, 2-391U-5639 Drill Bit, 11/32" 2-291U-5640 Drill Bit, 23/64" 2-291U-5641 Drill Bit, 3/8" 2-291U-5642 Drill Bit, 25/64" 2-29, 2-381U-5643 Drill Bit, 13/32" 2-29, 2-391U-5644 Drill Bit, 27/64" 2-291U-5645 Drill Bit, 7/16" 2-291U-5646 Drill Bit, 29/64" 2-29, 2-381U-5647 Drill Bit, 15/32" 2-29, 2-391U-5648 Drill Bit, 31/64" 2-291U-5649 Drill Bit, 1/2" 2-291U-5682 Drill Bit, 17/32" 2-28, 2-38, 2-411U-5683 Drill Bit, 9/16" 2-28, 2-391U-5684 Drill Bit, 19/32" 2-28, 2-381U-5685 Drill Bit, 5/8" 2-281U-5686 Drill Bit, 21/32" 2-28, 2-38, 2-39, 2-411U-5687 Drill Bit, 11/16" 2-281U-5688 Drill Bit, 23/32" 2-28, 2-391U-5689 Drill Bit, 3/4" 2-281U-5690 Drill Bit, 25/32" 2-28, 2-38, 2-411U-5691 Drill Bit, 13/16" 2-28, 2-391U-5692 Drill Bit, 27/32" 2-281U-5693 Drill Bit, 7/8" 2-281U-5694 Drill Bit, 29/32" 2-28, 2-381U-5695 Drill Bit, 15/16" 2-281U-5696 Drill Bit, 31/32" 2-28, 2-411U-5697 Drill Bit, 1" 2-281U-5698 Drill Bit, 1 1/32" 2-28, 2-381U-5699 Drill Bit, 1 1/16" 2-28, 2-421U-5700 Drill Bit, 1 3/32" 2-28, 2-41

1U-5701 Drill Bit, 1 1/8" 2-281U-5702 Drill Bit, 1 5/32" 2-28, 2-381U-5703 Drill Bit, 1 3/16" 2-28, 2-421U-5704 Drill 2-381U-5705 Drill Bit, 1 1/4" 2-281U-5706 Drill 2-381U-5707 Drill Bit, 1 5/16" 2-28, 2-421U-5709 Drill Bit, 1 3/8" 2-281U-5710 Drill 2-381U-5711 Drill Bit, 1 7/16" 2-28, 2-421U-5713 Drill Bit, 1 1/2" 2-281U-5714 Drill Set, Standard, 29 Piece 2-281U-5715 Wheel & Rim Nuts Impact Socket,

1-1/2" 1-19, 1-621U-5718 Vacuum Pump 2-112, 2-113, 2-1141U-5719 Seal Kit for

1U-5718 Vacuum Pump 2-112, 2-1141U-5732 Wrench Assy,

3/4" Sq. Drive Handle 1-381U-5733 Wrench Assy,



3/4" Square Drive Handle 1-381U-5748 Output Spindle 1-611U-5809 Grommet 1-611U-5889 Standard Drill Set, 13 Piece 2-281U-5890 Drill Set, 13-Piece 2-291U-5891 Extra Heavy-Duty Cobalt Drill Set,

29 Piece 2-291U-5892 Heavy-Duty Drill Set, 13 Piece 2-291U-5893 Heavy-Duty Drill Set, 29 Piece 2-291U-6128 Reinforcement Tape 3-21U-6132 Belzona 1311 Ceramic R Metal 3-21U-6136 Belzona 1111 Super Metal Kit 3-21U-6140 Belzona 1221 Super E-Metal Kit 3-21U-6142 Belzona Kit for Block Repair 33--221U-6151 Drive Socket, 17 mm, 3/4 in 1-311U-6152 Hex Bit, 17 mm 1-311U-6156 Barrel Cover 22--1111551U-6221 Hydraulic Torque Wrench,

Low Clearance 1-631U-6222 46 mm Low Clearance Hex Link

(1,670 max ft lbs) 1-631U-6225 Seal Kit for Square Drive

Hydraulic Wrenches 1-641U-6395 O-ring Compound, 1 gal 3-311U-6396 O-ring Compound, 8 fl oz 3-311U-6444 Black Light, 220V (Leak Detection) 33--22441U-6516 Cat 119 Cutting Oil, 5 gal 3-301U-6517 Cat 119 Cutting Oil, 55 gal 3-301U-6520 Cat 250 Grinding Fluid, 55 gal 3-301U-6523 Oil, 450 Rust Preventive, Cat, 55 gal 3-311U-6526 Cat 4A Rust Preventive Oil, 55 gal 3-311U-6539 Wheel Salvage Tap,

1-1/16"-12 Thd 2-321U-6540 Wheel Salvage Tap,

1-5/16"-12 Thd 2-321U-6586 Welding Jacket, Large 2-831U-6587 Welding Jacket 2-831U-6600 Spiralock Tap 2-351U-6689 Differ. Pinion Shaft Nut

Socket Wrench 1-431U-6690 Differ. Pinion Shaft Nut



Socket Wrench 1-431U-6699 No. 7 Drill [(0.201") for #6 pins] 2-281U-6700 Drill Bit, .290" 2-281U-6705 Masking Tape, 1/2 in 2-1161U-6706 Masking Tape, 3/4 in 2-1161U-6707 Masking Tape, 1 in 2-1161U-6708 Masking Tape, 2 in 2-1161U-6709 Masking Tape, 2 1/2 in 2-116

1U-6710 Masking Tape, 3 in 2-1161U-6725 Buttress Tap, 1.375" 2-351U-6726 Buttress Tap, 1.750" 2-351U-6728 External Tip Set 1-521U-6780 Bench and Pedestal Wheel,

Type 1, A36 2-211U-6781 Bench and Pedestal Wheel,






Type 1, A60 2-211U-6788 Raised Hub Wheel,

Type 27, Std., A24 2-191U-6789 Raised Hub Wheel 2-191U-6790 Raised Hub Wheel,

Type 27, Std., A24 2-191U-6791 Raised Hub Wheel,






Type 27, Std., A24 2-191U-6809 Cut Off Wheel, A36 2-201U-6810 Cut Off Wheel, A36 2-201U-6811 Cut Off Wheel, A24 2-201U-6812 Type 16 Cone 2-261U-6813 Type 17 Cone 2-261U-6814 Grinding Wheel 2-261U-6815 Type 18R Plug 2-261U-6816 Type 18R Plug 2-261U-6817 Flaring Cup Snagging Wheel,

Type 11, A16 2-221U-6818 Flaring Cup Snagging Wheel,

Type 11, A16 2-221U-6819 Flaring Cup Snagging Wheel,

Type 11, A16 2-221U-6820 Mounted Point,

1/4" Mandrel Dia., A36 2-251U-6821 Mounted Point,

1/4" Mandrel Dia., A60 2-251U-6822 Replacement Bulb 2-251U-6823 Mounted Point,




1/4" Mandrel Dia., A60 2-251U-6827 Fiber Disc, 24 Grit 2-12, 2-131U-6828 Fiber Disc, 36 Grit 2-121U-6829 Fiber Disc, 50 Grit 2-121U-6830 Fiber Disc, 60 Grit 2-121U-6831 Fiber Disc, 80 Grit 2-121U-6832 Fiber Disc, 100 Grit 2-121U-6833 Fiber Disc, 120 Grit 2-121U-6834 Fiber Disc, 24 Grit 2-12, 2-131U-6835 Fiber Disc, 36 Grit 2-121U-6836 Fiber Disc, 50 Grit 2-121U-6837 Fiber Disc, 60 Grit 2-121U-6838 Fiber Disc, 80 Grit 2-121U-6839 Fiber Disc, 100 Grit 2-121U-6840 Fiber Disc, 120 Grit 2-121U-6841 Fiber Disc, 24 Grit 2-12, 2-13


Part Number Index


1U-6842 Fiber Disc, 36 Grit 2-121U-6843 Fiber Disc, 50 Grit 2-121U-6844 Fiber Disc, 60 Grit 2-121U-6845 Fiber Disc, 80 Grit 2-121U-6846 Fiber Disc, 100 Grit 2-121U-6847 Fiber Disc, 120 Grit 2-121U-6848 Cloth Shop Roll, 60J 2-231U-6849 Cloth Shop Roll, 80J 2-231U-6850 Cloth Shop Roll, 120J 2-231U-6851 Cloth Shop Roll, 180J 2-231U-6852 Cloth Shop Roll, 240J 2-231U-6853 Cloth Shop Roll, 320J 2-231U-6854 Aluminum Oxide Sheets, 60J 2-231U-6855 Aluminum Oxide Sheets, 80J 2-231U-6856 Aluminum Oxide Sheets, 120J 2-231U-6857 Aluminum Oxide Sheets, 180J 2-231U-6858 Aluminum Oxide Sheets, 240J 2-231U-6859 Aluminum Oxide Sheets, 320J 2-231U-6865 Drill Bit, 10.00 mm 2-301U-6866 Drill Bit, 12.00 mm 2-301U-7234 Feeler Gauge 1-531U-7250 Pin Punch Set, 7 Piece 1-521U-7260 Drift Punch Set, 5 Piece 1-521U-7262 Magnet 1-541U-7296 Center Punch, 6 1/4" Long 1-531U-7318 Continuity Tester/Flashlight 22--66881U-7319 Heavy-Duty Flashlight, 8 1/4" 2-671U-7320 Heavy-Duty Flashlight, 11" 2-671U-7321 Heavy-Duty Flashlight, 10" 1-3, 2-671U-7322 Heavy-Duty Flashlight, 12 3/16" 2-671U-7323 Heavy-Duty Flashlight, 5 3/4" 2-671U-7419 Bit 1-311U-7427 Engine Cover, Paper 48 x 72 in 22--1100881U-7428 Cylinder Hone, 1.1 Liter Eng. 2-251U-7429 Cylinder Brush, 1.1 Liter Eng. 2-41U-7433 Drill Bit, 33/64" 2-28, 2-38, 2-421U-7434 Drill Bit, 37/64" 2-28, 2-38, 2-39, 2-421U-7435 Drill Bit, 45/64" 2-28, 2-421U-7436 Drill Bit, 53/64" 2-28, 2-421U-7437 Drill Bit, 1 9/16" 2-28, 2-421U-7438 Drill Bit, 1 19/32" 2-28, 2-421U-7521 Universal Outside Thread Chaser,

Std. 2-341U-7559 Hex Key Wrench, 1.5 mm 1-431U-7560 Hex Key Wrench, 2 mm 1-431U-7561 Hex Key Wrench, 2.5 mm 1-431U-7562 Hex Key Wrench,

Standard and Metric, 3 mm 1-431U-7563 Hex Key Wrench, 4 mm 1-6, 1-9, 1-431U-7564 Hex Key Wrench, 5 mm 1-6, 1-9, 1-431U-7565 Hex Key Wrench, 6 mm 1-6, 1-9, 1-431U-7566 Hex Key Wrench, 8 mm 1-6, 1-9, 1-431U-7567 Hex Key Wrench, 10 mm 1-6, 1-9, 1-431U-7568 Hex Key Wrench, 12 mm 1-431U-7569 Hex Key Wrench, 14 mm 1-6, 1-9, 1-431U-7570 Hex Key Wrench, 17 mm 1-431U-7571 Hex Key Wrench, 19 mm 1-431U-7572 Hex Key Wrench, 1/16 in 1-431U-7573 Hex Key Wrench, 5/64 in 1-431U-7574 Hex Key Wrench, 3/32 in 1-431U-7575 Hex Key Wrench, 1/8 in 1-431U-7576 Hex Key Wrench, 5/32 in 1-431U-7577 Hex Key Wrench, 3/16 in 1-431U-7578 Hex Key Wrench, 7/32 in 1-431U-7579 Hex Key Wrench, 1/4 in 1-431U-7580 Hex Key Wrench, 5/16 in 1-431U-7581 Hex Key Wrench, 3/8 in 1-431U-7582 Hex Key Wrench, 7/16 in 1-431U-7583 Hex Key Wrench, 1/2 in 1-431U-7584 Hex Key Wrench, 9/16 in 1-431U-7585 Hex Key Wrench, 5/8 in 1-6, 1-9, 1-431U-7586 Hex Key Wrench, 1 in 1-431U-7587 Rolling Head Pry Bar, 6" 1-461U-7591 Pry Bar, 18" 1-461U-7592 Pry Bar, 24" 1-461U-7593 Pry Bar, 30" 1-461U-7608 Chain Wrench 11--3399

1U-7610 Universal Outside Thread Chaser, Metric 2-34

1U-7622 Surface Recond Disc, A-Coarse, 4" Dia. 2-7, 2-8

1U-7623 Disc Holder 924, 4" Dia 2-7, 2-8, 2-101U-7626 Socket, 19 mm, 6 Pt., 1" Drive 1-341U-7627 Socket, 22 mm, 6 Pt., 1" Drive 1-341U-7628 Socket, 24 mm, 6 Pt., 1" Drive 1-341U-7629 Socket, 27 mm, 6 Pt., 1" Drive 1-341U-7630 Socket, 30 mm, 6 Pt., 1" Drive 1-341U-7631 Socket, 32 mm, 6 Pt., 1" Drive 1-341U-7632 Hex Key Wrench, 3/4 in 1-431U-7648 Tube Cutter 2-112, 2-1141U-7936 Impact Socket, 8 mm,

6 Pt., 1/2" Drive, Deep Length 1-331U-7937 Impact Socket, 9 mm,


6 Pt., 1/2" Drive, Deep Length 1-331U-7939 Socket, Impact, 11 mm,



6 Pt., 1/2" Drive Deep Length 1-331U-7943 Impact Socket, 14 mm,


6 Pt, 1/2" Drive, Deep Length 1-331U-7946 Impact Socket, 17 mm,


6 Pt., 1/2" Drive Deep Length 1-331U-8091 Winter Hard Hat Liner 22--88991U-8095 Face Shield 22--99001U-8096 Clear Replacement Window 2-901U-8097 Welding Helmet,

2 in x 4 1/4 in lens 22--8822, 2-831U-8098 Welding Helmet RPLCMT Lens,

Shade 5 2-831U-8099 Welding Helmet Lens

RPLCMT Plastic Cover 2-831U-8100 Welding Helmet,

4 1/2 x 5 1/4 in lens 22--88331U-8101 Welding Helmet

RPLCMT Lens, Shade 10 2-831U-8102 Welding Helmet Lens

RPLCMT Plastic Cover Plate 2-831U-8103 Welding Goggles, Shade 5 Lens 22--88331U-8104 Welding Goggles

with Lift Front Lens 22--88331U-8105 Eye Cup Welding Goggles 22--88331U-8106 Eye Cup Welding Goggles

RPLCMT Lens 2-831U-8107 Eye Cup Welding Goggles

RPLCMT Lens 2-831U-8118 Fuel Tank Repair Kit 3-341U-8121 Drill Bit, 1.00 mm 2-301U-8122 Drill Bit, 1.20 mm 2-301U-8123 Drill Bit, 1.35 mm 2-301U-8124 Drill Bit, 1.50 mm 2-301U-8125 Drill Bit, 1.70 mm 2-301U-8126 Drill Bit, 1.80 mm 2-301U-8127 Drill Bit, 1.90 mm 2-301U-8128 Drill Bit, 2.00 mm 2-301U-8129 Drill Bit, 2.10 mm 2-301U-8130 Drill Bit, 2.20 mm 2-301U-8131 Drill Bit, 2.30 mm 2-301U-8132 Drill Bit, 2.40 mm 2-301U-8133 Drill Bit, 2.50 mm 2-301U-8134 Drill Bit, 2.60 mm 2-301U-8135 Drill Bit, 2.70 mm 2-301U-8136 Drill Bit, 2.80 mm 2-301U-8137 Drill Bit, 2.90 mm 2-301U-8138 Drill Bit, 3.00 mm 2-301U-8139 Drill Bit, 3.20 mm 2-301U-8140 Drill Bit, 3.40 mm 2-30

1U-8141 Drill Bit, 3.50 mm 2-301U-8142 Drill Bit, 3.60 mm 2-301U-8143 Drill Bit, 3.90 mm 2-301U-8144 Drill Bit, 4.00 mm 2-301U-8145 Drill Bit, 4.10 mm 2-301U-8146 Drill Bit, 4.30 mm 2-301U-8147 Drill Bit, 4.50 mm 2-301U-8148 Drill Bit, 4.60 mm 2-301U-8149 Drill Bit, 4.70 mm 2-301U-8150 Drill Bit, 4.80 mm 2-301U-8151 Drill Bit, 5.00 mm 2-301U-8152 Drill Bit, 5.20 mm 2-301U-8153 Drill Bit, 5.50 mm 2-301U-8154 Drill Bit, 5.60 mm 2-301U-8155 Drill Bit, 5.80 mm 2-301U-8156 Drill Bit, 6.00 mm 2-301U-8157 Drill Bit, 6.50 mm 2-301U-8158 Drill Bit, 6.80 mm 2-301U-8159 Drill Bit, 7.00 mm 2-301U-8160 Drill Bit, 7.50 mm 2-30, 2-411U-8161 Drill Bit, 8.00 mm 2-301U-8162 Drill Bit, 8.20 mm 2-301U-8163 Drill Bit, 8.50 mm 2-301U-8164 Drill Bit, 8.60 mm 2-301U-8165 Drill Bit, 8.70 mm 2-30, 2-421U-8166 Drill Bit, 9.00 mm 2-301U-8167 Drill Bit, 9.50 mm 2-30, 2-411U-8168 Drill Bit, 10.00 mm 2-301U-8169 Drill Bit, 10.50 mm 2-30, 2-421U-8170 Drill Bit, 11.00 mm 2-301U-8171 Drill Bit, 11.50 mm 2-30, 2-411U-8172 Drill Bit, 12.00 mm 2-301U-8173 Drill Bit, 12.20 mm 2-30, 2-421U-8174 Drill Bit, 12.50 mm 2-301U-8177 Drill 2-421U-8184 Drill Bit, 18.00 mm 2-301U-8190 Drill Bit, 24.00 mm 2-301U-8194 Drill Bit, 27.00 mm 2-30, 2-421U-8201 Drill Bit, 32.50 mm 2-301U-8209 Welding Helmet RPLCMT Lens,

Shade 10 2-831U-8221 Nylon Lifting Sling, Endless Slings

(Type V) 3' 1-901U-8222 Nylon Lifting Sling, Endless Slings












(Type V) 12' 1-901U-8234 Sling, Nylon Lifting, Eye and

Eye Slings (Type III), 3' 1-901U-8235 Sling, Nylon Lifting, Eye and




Eye Slings (Type III), 10' 1-90



Part Number Index

1U-8239 Sling, Nylon Lifting, Eye and Eye Slings (Type III), 12' 1-90







1U-8246 Sling, Nylon Lifting, Eye and Eye Slings (Tapered Eyes) 8' 1-90


















1U-8274 Cloth Shop Roll, 60J 2-231U-8275 Cloth Shop Roll, 80J 2-231U-8276 Cloth Shop Roll, 100J 2-231U-8277 Cloth Shop Roll, 120J 2-231U-8278 Cloth Shop Roll, 180J 2-231U-8279 Cloth Shop Roll, 240J 2-231U-8280 Cloth Shop Roll, 320J 2-231U-8281 Silicon Carbide Sheets, 400A 2-231U-8282 Silicon Carbide Sheets, 500A 2-231U-8283 Silicon Carbide Sheets, 600A 2-231U-8285 Bench and Pedestal Wheel,



Type 1, A36 2-211U-8290 Wheel, Bench and Pedestal,

Type 1, A60 2-211U-8582 Stud Remover, Housing - Main 2-471U-8583 Collet Stud Remover 2-471U-8584 Collet Stud Remover 2-471U-8586 Socket 1-191U-8589 Replacement Blades 2-112, 2-1141U-8701 Sockets, 1/2 in dr impct 7/16 in 1-181U-8757 Tubing 2-112, 2-1141U-8758 Pliers 11--55221U-8759 Replacement Tips 1-52

1U-8760 Hose Press Chain Wrench 11--33991U-8764 Drill Bit, 5/8" 2-291U-8765 Drill Bit, 3/4" 2-291U-8791 Chain Wrench Group,

Hyd. Cylinder 1-401U-8792 Chain Wrench Assy, Hyd. Cylinder 1-401U-8798 Socket 1-191U-8801 Cat 4A Rust Preventive Oil, 1 gal 3-311U-8805 Cat 119 Cutting Oil, 1 gal 3-301U-8808 Cat 250 Grinding Fluid, 1 gal 3-301U-8809 Cat 450 Rust Preventive Oil, 1 gal 3-311U-8813 Hydrosolv Defoamant,

DK100 Additive, 1 gal 3-101U-8846 Flexible Gasket Maker 3-61U-9187 Ground Fault Circuit Interrupter 11--77661U-9234 Hacksaw Blade Set,

Replacement, Bi-Metal 1-45, 1-761U-9236 Hacksaw Blade Set,

Replacement, Bi-Metal 1-45, 1-761U-9238 Hacksaw Blade Set,

Replacement, Bi-Metal 1-45, 1-761U-9240 Hacksaw Blade Set, Replacement,

High Carbon Steel 1-45, 1-761U-9242 Hacksaw Blade Set, Replacement,

High Carbon Steel 1-45, 1-761U-9244 Hacksaw Blade Set, Replacement,

High Carbon Steel 1-45, 1-761U-9366 Automatic Power Tape,

3/4" Blade Width 1-491U-9367 Automatic Power Tape,

1" Blade Width 1-491U-9368 Automatic Power Tape,

1" Blade Width 1-491U-9369 Steel Tape, 3/8" Blade Width 1-501U-9381 Adapter 2-81U-9474 Hex Bit Socket (22 mm) 1-311U-9476 Hex Bit (22 mm) 1-311U-9531 Alkaline Battery, “C” Size 2-691U-9532 Alkaline Battery,

1.5V “D” (6 Req) 2-68, 2-691U-9533 Non-Rechargeable Package

Quantity Alkaline Battery 2-691U-9534 Alkaline Battery, 9V 2-691U-9535 Alkaline Industrial

AAA Size Battery, 1.5V 2-691U-9536 Batteries, Heavy-Duty Industrial

C Size, 1.5V 2-691U-9537 Heavy-Duty Industrial D Size, 1.5V 2-691U-9538 Heavy-Duty Industrial

AA Size Batteries, 1.5V 2-691U-9539 Carbon-Zinc Battery 2-691U-9547 Spring Terminal, 6V 2-701U-9698 Hydrosolv Descaleant,

Additive, 1 qt 3-101U-9707 Plug Tap, 11/8-7-2B 2-321U-9708 Spiralock Tap, 11/4-7 2-351U-9709 Plug Tap, 13/8-6-2B 2-321U-9731 Masking Paper, 3 in 2-1161U-9732 Masking Paper, 12 in 2-1161U-9733 Masking Paper, 24 in 2-1161U-9734 Masking Paper, 36 in 2-1161U-9763 A/C Vacuum Pump Oil 3-291U-9764 A/C Vacuum Pump Oil 3-291U-9787 3176 Engine Hone 2-251U-9788 3176 Engine Brush 2-41U-9891 Hydraulic Oil Additive 3-20, 3-321U-9915 Scratch Brush, Curved Handle 1-551U-9916 Scratch Brush, Curved Handle 1-551U-9917 Scratch Brush, Shoe Handle 1-551U-9918 Scratch Brush,

Inspection Stainless 1-551U-9919 Parts Cleaning Brush, 11" O.A.L. 1-561U-9920 Parts Cleaning Brush, 11" O.A.L. 1-561U-9921 Battery Post Brush 11--55661U-9922 Parts Cleaning Brush, 11" O.A.L. 1-561U-9939 End Wire Brush, 1/4" Shank,

Knot Style 2-3

1U-9940 End Wire Brush, 1/4" Shank, Crimped Wire 2-4

1U-9941 End Wire Brush, 1/4" Shank, Crimped Wire 2-4

1U-9942 End Wire Brush, 1/4" Shank, Circular End 2-3

1U-9943 End Wire Brush, 1/4" Shank, Knot Style 2-3

1U-9945 End Wire Brush, 1/4" Shank, Galvanized Crimped Wire 2-4

1U-9946 End Wire Brush, 1/4" Shank, Galvanized 2-3

1U-9957 Radial Knot Stringer Bead Wheel, 3" Dia. 2-2

1U-9971 Bench Grinder Wire Brush, 6" Dia. 2-31U-9972 Bench Grinder Wire Brush, 6" Dia. 2-31U-9973 Bench Grinder Wire Brush, 7" Dia. 2-31U-9974 Bench Grinder Wire Brush, 8" Dia. 2-31U-9977 Acid Brush 1-561U-9978 Acid Brush, 1/2" 1-561U-9979 Acid Brush, 9/16 1-561U-9994 Collet Stud Remover 2-471U-9995 Collet Stud Remover 2-471U-9996 Stud Remover, Collet 2-471U-9998 Collet Stud Remover 2-471Y-3904 Adhesive Sealant - Clear 33--332A-4781 Hex Head Bolt,

1/4-20 x 2 3/4 in, bulk 2-1282B-0858 Pipe-Square Drive Plugs, 1/2-14 2-502B-0947 Hex Head Bolt,

1/2-13 x 2 1/4 in, bulk 2-1292B-1730 Special Large Socket Wrench,

3/4" Drive 1-432B-1731 Special Large Socket Wrench,

3/4" Drive 1-432B-2526 Special Thread Tap 2-322B-2694 Hex Head Bolt, 5/16-18 x 2 in,

bulk 2-1292B-4317 Parts Cleaning Brush,

10 3/4" O.A.L. 1-562B-7408 Plug 2-492B-7409 Pipe-Square Head Plugs, 1/4-18 2-492B-7457 Plug 2-492B-9256 Special Thread Tap 2-322G-7781 Sealant for Liquid Filled Rims

on Wheel Loaders 33--22992H-2213 Bearing 1-602J-2668 Hyd. Test G. Cover, 1.50" line 2-502J-5608 SAE Code 61 Flange Port Cover,

2.81", 71.4 mm 2-502M-1672 Bearing 1-602M-2689 Coupler Assy 1-562M-9780 O-ring Seal 2-492N-2213 Bearing 1-602P-2333 Exhaust Manifold High

Temp. Sealer 3-342P-2334 Std. Length Socket, 1 11/16",

6 Pt., 1" Drive 1-192P-2335 Std. Length Socket, 1 3/4",



6 Pt., 1" Drive 1-192P-5475 Deep Well Socket,

1/2", 1/2" Drive 1-13, 1-182P-5476 Deep Well Socket,




3/4, 1/2" Drive 1-13, 1-182P-5481 Spark Plug Wrench 1-13, 1-18, 11--44442P-5482 Deep Well Socket,

7/8", 1/2" Drive 1-13, 1-18


Part Number Index


2P-5483 Deep Well Socket, 15/16", 1/2" Drive 1-13, 1-18

2P-5484 Deep Well Socket, 1", 1/2" Drive 1-13, 1-18

2P-5487 Open End Crowfoot Wrench, 3/8" 1-122P-5488 Open End Crowfoot Wrench, 7/16" 1-122P-5489 Open End Crowfoot Wrench, 1/2" 1-122P-5490 Deep Well Socket Set,

9 Piece, 1/2" Drive 1-3, 11--11332P-5491 Open End Crowfoot Wrench, 9/16" 1-122P-5492 Open End Crowfoot Wrench, 5/8" 1-122P-5493 Open End Crowfoot Wrench, 11/16" 1-122P-5494 Open End Crowfoot Wrench, 3/4" 1-122P-5495 Open End Crowfoot Wrench, 13/16" 1-122P-5496 Open End Crowfoot Wrench, 7/8" 1-122P-5497 Stud Remover Body 2-462P-5520 Open-End Crowfoot Wrench Group 11--11222P-5527 Extractor, 3/4" 2-462P-5528 Extractor, 7/8" 2-462P-5529 Extractor, 1" 2-462P-5530 Taper Pipe Tap Set 2-352P-5531 Taper Pipe Tap 2-352P-5532 Taper Pipe Tap 2-352P-5533 Taper Pipe Tap 2-352P-5534 Taper Pipe Tap 2-352P-5535 Stud Remover Set 22--44662P-5537 Washer 2-462P-5538 Bolt 2-462P-7274 Hex Bit 1-152P-8253 Strap 1-402P-8261 Final Drive Adapter, 3/4 in Female

to 1 in Male 1-222P-8262 Socket, 2 7/8", 6 Pt.,

1" Drive, Std. Length 1-192P-8263 Socket Assy, 1/8" Hex Size 1-152P-8264 Sleeve Meter Governor

Adjusting TG Socket 1-152P-8265 Governor Adjusting TG Socket 1-152P-8266 Socket Assy, 1/4" Hex Size 1-152P-8267 Socket Assy, 5/16" Hex Size 1-152P-8268 Socket Assy, 3/8" Hex Size 1-152P-8269 Hex Bit, 1/8" Hex Size 1-152P-8271 Hex Bit, 5/32" Hex Size 1-152P-8272 Hex Bit, 3/16" Hex Size 1-152P-8273 Hex Bit 1-152P-8275 Hex Bit, 3/8" Hex Size 1-152P-8276 Std. Length Socket,

5/8", 12 Pt., 3/4" Drive 1-182P-8289 Holder Block Hydraulic

System Test 1-852P-8306 Sleeve Meter Field

Serv TG Box Assy 1-832P-8312 External Retaining Ring Pliers 11--55222P-8338 Holding Fixture 22--55882P-9063 Hydraulic Oil, 10W 3-192P-9697 Tee Test TG Plug, 7/8" 2-492P-9863 Gear Oil, 80W-90 3-192P-9868 Antifreeze/Coolant 3-122P-9869 Transmission/Drive Train Oil, 30 3-172R-5657 Pipe-Allen Drive Plugs,1-11 1/2 2-502S-4078 Hyd. Sys. Seal 2-49, 2-1132S-5562 Clutch Assembly 3-282S-7905 Pipe-Hex Head Plugs, 1/16-27 2-492W-9499 Hex Head Bolt, M6 x 1,

40 mm, bulk 2-1292Y-5829 Hex Nut, M10 x 1.50, bulk 2-1292Y-5841 Metric Plugs,M16 x 1.5 2-502Y-6461 Metric Plugs, M16 x 1.5 2-502Y-6462 Metric Plugs, M16 x 1.5 2-503B-0551 Pipe, Square Drive Plugs, 1-11 1/2 2-503B-3911 Bearing 1-603B-4504 Lock Washer 1/4 in, bulk 2-1283B-4505 Lock Washer, 5/16 in, bulk 2-1293B-4506 Lock Washer, 3/8 in, bulk 2-1293B-4508 Lock Washer, 1/2 in, bulk 2-1293B-4510 Lock Washer, 5/8 in, bulk 2-1293B-4607 Cotter Pin, 3/32 in x 1/2 in Lg, bulk 2-129

3B-4615 Cotter Pin, 1/8 in x 3/4 in Lg, bulk 2-1293B-4617 Cotter Pin, 1/8 in x 1 in Lg, bulk 2-1293B-4618 Cotter Pin, 1/8 in x 1 1/4 in Lg, bulk 2-1293B-4621 Cotter Pin, 1/8 in x 2 in Lg, bulk 2-1293B-6352 Special Large Socket Wrench,

3/4" Drive 1-433B-7012 Special Large Socket Wrench,

1/2" Drive 1-433B-7722 Reducer 3/8 inch-18 NPTF to

1/4 inch-18 NPTF 2-1133D-2824 Hyd. Sys. Testing Seal 2-493E-6640 Hardware Bin Kits, 1735 pieces 2-1283E-8326 Gear Oil, 85W-140 3-193E-9420 Hardware Bin Kits, 1975 pieces 2-1283E-9421 Hardware Bin Kits, 1659 pieces 2-1283E-9422 Hardware Bin Kit, 1580 pieces 2-1283E-9478 Transmission/Drive Train Oil, 50 3-173E-9707 Diesel Engine Oil, 10W-30 3-143E-9708 Diesel Engine Oil, 10W-30 3-143E-9709 Diesel Engine Oil, 10W-30 3-143E-9712 Diesel Engine Oil, 15W-40 3-143E-9713 Diesel Engine Oil, 15W-40 3-143E-9715 Diesel Engine Oil, 15W-40 3-143E-9838 Diesel Engine Oil, 15W-40 3-143E-9840 Diesel Engine Oil, 15W-40 3-143E-9841 Diesel Engine Oil, 15W-40 3-143E-9842 Diesel Engine Oil, 15W-40 3-143E-9844 Diesel Engine Oil, 10W-30 3-143E-9848 Diesel Engine Oil, 15W-40 3-143E-9849 Diesel Engine Oil, 15W-40 3-143E-9900 Diesel Engine Oil, 15W-40 3-143E-9901 Diesel Engine Oil, 15W-40 3-143E-9902 Diesel Engine Oil, 15W-40 3-143F-4479 Spring Pin 1-203J-1907 O-ring Seal 2-49, 2-1133J-5390 Plug 2-49, 2-1133J-7354 Hyd. Sys. Test O-ring Seal 2-49, 2-112,

2-113, 2-1143K-0360 Seal (Qty 2) 2-493K-8460 Straight Thread O-ring-Hex

Head Plugs 2-493K-8782 Fuse (10 Amp), bulk 2-1293L-1850 Pipe-Allen Drive Plugs, 1/2-14 2-503L-6521 Adapter Tee 1/4 inch-18 NPT 2-1133M-7045 Pipe-Hex Head Plugs, 3/4-14 2-493P-0659 Transmission/Drive Train Oil, 10W 3-173P-1535 Hyd. Cyl. Chain Wrench Group 11--44003P-1536 Hyd. Cyl. Chain Wrench Group

Handle 1-403P-1537 Hyd. Cyl. Chain Wrench Group Pin 1-403P-1549 Field Serv TG Block Sleeve Meter 1-853P-2044 Coolant Additive 3-123P-2210 Socket, 1/2 in Dr, 12 Pt 1-183P-2213 Hexagon Rethreading

Fractional Die 2-333P-2230 Fast Fill Fuel Sys. Adapter Socket 1-183P-2240 Extension Socket, 3/8" 1-213S-0459 Replacement Tip, Hard 1-3, 1-463S-0460 Replacement Tip, Medium 1-3, 1-463S-2093 Cable Strap,

170.2 x 4.9 mm, bulk 2-124, 2-1293S-6252 RTV Adhesive/Sealant,

Black, 3 fl oz 3-74B-4845 Pipe-Square Drive Plugs, 3/8-18 2-504B-8586 Plug 2-494B-9365 Hex Head Bolt, 1/4-20 x 3 in, bulk 2-1284C-2959 Air Conditioning Pump Lubricant 3-284C-2960 Air Conditioning Pump Lubricant 3-284C-3015 Drawer Liner Kit 1-834C-3016 Drawer Liner Kit 1-834C-3119 Attachment, Funnel 22--1111554C-3238 Drum Tilt Cradle 22--1111554C-3302 Air Blow Gun, w/ Nozzle Assy 1-744C-3304 Nozzle w/ 6" Extension 1-744C-3335 Left Hand Drill, 1/16" 2-30, 2-464C-3336 Left Hand Drill, 5/64" 2-30, 2-464C-3337 Left Hand Drill, 3/32" 2-30, 2-46

4C-3338 Left Hand Drill, 7/64" 2-30, 2-464C-3339 Left Hand Drill, 1/8" 2-30, 2-464C-3340 Left Hand Drill, 9/64" 2-30, 2-464C-3341 Left Hand Drill, 5/32" 2-30, 2-464C-3342 Left Hand Drill, 11/64" 2-30, 2-464C-3343 Left Hand Drill, 3/16" 2-30, 2-464C-3344 Left Hand Drill, 13/64" 2-30, 2-464C-3345 Left Hand Drill, 7/32" 2-30, 2-464C-3346 Left Hand Drill, 13/64" 2-30, 2-464C-3347 Left Hand Drill, 1/4" 2-30, 2-464C-3348 Left Hand Drill, 17/64" 2-30, 2-464C-3349 Left Hand Drill, 9/32" 2-30, 2-464C-3350 Left Hand Drill, 9/64" 2-30, 2-464C-3351 Left Hand Drill, 5/16" 2-30, 2-464C-3352 Left Hand Drill, 21/64" 2-30, 2-464C-3353 Left Hand Drill, 11/32" 2-30, 2-464C-3354 Left Hand Drill, 23/64" 2-30, 2-464C-3355 Left Hand Drill, 3/8" 2-30, 2-464C-3356 Left Hand Drill, 25/64" 2-30, 2-464C-3357 Left Hand Drill, 13/32" 2-30, 2-464C-3358 Left Hand Drill, 27/64" 2-30, 2-464C-3359 Left Hand Drill, 7/16" 2-30, 2-464C-3360 Left Hand Drill, 28/64" 2-30, 2-464C-3361 Left Hand Drill, 15/32" 2-30, 2-464C-3362 Left Hand Drill, 31/64" 2-30, 2-464C-3363 Left Hand Drill, 1/2" 2-30, 2-464C-3364 Left Hand Spiral Tapered

Flute Extractor 2-44, 2-454C-3365 Left Hand Spiral Tapered









Flute Extractor 2-444C-3374 Straight Tapered

Flute Extractor 2-44, 2-454C-3375 Straight Tapered





Flute Extractor 2-44, 2-454C-3380 Straight Tapered Flute Extractor 2-444C-3381 Left Hand Spiral Extractor Set 2-454C-3382 Left Hand Spiral Extractor Set 2-454C-3383 Straight Tapered Extractor Set 2-454C-3384 Left Hand Spiral Extractor Set 2-454C-3385 Drill Index 22--33004C-3602 Frosted Bottle, 57g (2 oz) 2-1124C-3722 Plastic Divided Utility

w/ Hinged Lid Box 1-864C-3723 Box, Hyd. Sys. Testing, Fittings 1-864C-3724 Plastic Divided Utility

w/ Hinged Lid Box 1-864C-3725 Plastic Divided Utility

w/ Hinged Lid Box 1-864C-3741 4 in Mechanics Vise 2-56, 2-574C-3742 5 in Mechanics Vise 2-56, 2-574C-3743 6 in Mechanics Vise 2-56, 2-574C-3744 Combination Pipe

and Bench Vise 2-56, 2-57



Part Number Index

4C-3745 Combination Pipe and Bench Vise 2-56, 2-57

4C-3746 Combination Pipe and Bench Vise 2-56, 2-57

4C-3747 Jaw Cap, 6" 2-574C-3748 Jaw Cap, 5" 2-574C-3749 Jaw Cap, 4 1/2" 2-574C-3750 Jaw Cap, 4" 2-574C-3751 Machinist Vise 2-564C-3752 Machinist Vise 2-56, 2-574C-3753 Machinist Vise 2-56, 2-574C-3754 Machinist Vise 2-56, 2-574C-3755 Std. Throat Regular

Duty C-Clamp, 0 - 2" 2-584C-3756 Std. Throat Regular DutyC-Clamp,

0 - 2 in 2-584C-3757 Std. Throat Regular Duty C-Clamp,

0 - 4" 2-584C-3758 Std. Throat Regular Duty C-Clamp,



1 1/2" - 10" 2-584C-3761 Std. Throat Regular Duty C-Clamp,

1 1/8" - 12" 2-584C-3766 Type 1 Drill Sharpening, Wheel,

A100-H Alum. Oxide 2-214C-3768 Type 1 Drill Sharpening Wheel,

C80-I Silicon Carbide 2-214C-3769 Type 27 Raised Hub Wheel,

Hi Perf., Z/A24 2-194C-3770 Type 27 Raised Hub Wheel,



Hi Perf Z/A24 2-194C-3774 Type 28 Raised Hub Wheel,


Hi Perf., Z/A24 2-194C-3777 Type 1 Portable - Reinforced

Wheel, A36 2-214C-3778 Spira Band, 60 Grit 2-264C-3779 Spira Band, 60 Grit 2-264C-3780 Spira Band, 60 Grit 2-264C-3781 Spira Band, 60 Grit 2-264C-3782 Mandrel 1/8" 2-264C-3783 Mandrel 1/8" 2-264C-3784 Mandrel 1/8" 2-264C-3785 Mandrel 1/8" 2-264C-3809 Disc, PSA, Cloth Backed,

No Hole, 2" Dia. 2-144C-3810 Disc, PSA, Cloth Backed,







No Hole, 4" Dia. 2-144C-3824 Disc, PSA, Paper Disk Rolls,


No Hole, 12" Dia. 2-144C-3837 Back-up Pad for PSA Disc, 2" Dia. 2-154C-3838 Back-up Pad for PSA Disc, 3" Dia. 2-154C-3840 Back-up Pad for PSA Disc, 5" Dia. 2-154C-3845 Mounted Point,

1/4" Mandrel Dia., A60 2-25

4C-3846 Mounted Point, 1/4" Mandrel Dia., A36 2-25








4C-3863 Type 28 Raised Hub Wheel, Std., A24 2-19

4C-3864 Type 1 Portable - Reinforced Wheel, A24 2-21

4C-3865 Type 1 Portable - Reinforced Wheel, A36 2-21

4C-3868 Clean ‘N Strip Disc, Extra Coarse 2-94C-3975 Plastic Case 1-854C-4030 Thread Lock 3-34C-4032 Bearing Mount Compound 3-34C-4055 Tubing 2-112, 2-1144C-4056 Tube, 7.9 mm (5/16 inch) 2-112, 2-1144C-4057 Tube, 7.9 mm (5/16 inch) 2-112, 2-1144C-4065 Wrench, 55 mm 11--33664C-4067 Hex Key Wrench, 22.0 mm 1-434C-4081 Chain and Cable Lubricant 3-264C-4094 Filament Tape, 3/4" 22--111177, 2-1194C-4095 Transparent Tape, 1/2" 22--111177, 2-1194C-4099 Tape Dispenser, Box Sealing 22--1111994C-4100 Tape Dispenser, Filament 22--1111994C-4101 Tape Dispenser, Filament 22--1111994C-4102 Tape Dispenser, Filament 22--1111994C-4120 Safety Glasses, Mocha,

Eyebrow and Sideshield 2-854C-4175 Hand Pad Holder 2-224C-4178 HydroSolv SI (Lapping Compound) 3-314C-4179 HydroSolv SI (Lapping Compound) 3-314C-4180 HydroSolv SI (Lapping Compound) 3-314C-4181 Rethreading Metric Die, Hexagon 2-334C-4182 Rethreading Metric Die, Hexagon 2-334C-4183 Black Paint, Medium Gloss, 1 gal 3-384C-4184 Yellow Paint, High Gloss,

Fast Dry, 1 gal 3-384C-4185 Highway Yellow Paint,

High Gloss, 1 gal 3-384C-4186 Mojave Brown Paint,

Medium Gloss, 1 gal 3-384C-4189 Paint and Primer Thinner, 1 gal 3-394C-4190 Yellow Primer Paint, 1 gal 3-394C-4191 Black Paint, Medium Gloss, 5 gal 3-384C-4192 Yellow Paint, High Gloss,

fast dry, 5 gal 3-384C-4193 Highway Yellow Paint,

High Gloss, 5 gal 3-384C-4196 Paint and Primer Thinner, 5 gal 3-394C-4197 Yellow Primer Paint, 5 gal 3-394C-4198 Black Paint, Med. Gloss,

12 oz. Aerosol 3-384C-4199 Black Muffler Paint, 12 oz Aerosol 3-404C-4200 Yellow Paint, High Gloss,

12 oz. Aerosol 3-384C-4202 Mojave Brown Paint,

Medium Gloss, 12 oz. Aerosol 3-384C-4205 Yellow Primer Paint, 12 oz. Aerosol 3-394C-4206 Black Paint, Medium Gloss, Drum 3-384C-4207 Yellow Paint, High Gloss,

Fast Dry, drum 3-384C-4208 Highway Yellow Paint,

High Gloss, Drum 3-384C-4210 Paint and Primer Thinner, Drum 3-394C-4211 Yellow Primer Paint, Drum 3-39

4C-4217 Anti-Spatter Compound, 7 fl oz 3-354C-4218 Anti-Spatter Compound, 24 fl oz 3-354C-4381 Holder #922 2-8, 2-104C-4382 Holder #923 2-8, 2-104C-4383 Disc, Surface Recond.,

A-Coarse, 2" Dia. 2-7, 2-84C-4384 Disc, Surface Recond.,

A-Coarse, 3" Dia. 2-7, 2-84C-4391 Jaw Inserts 2-564C-4392 Replacement Jaw Inserts 2-564C-4393 Replacement Jaw Inserts 2-564C-4394 Jaw Inserts 2-564C-4395 Jaw Inserts 2-564C-4396 Jaw Inserts 2-564C-4397 Jaw Inserts 2-564C-4398 Jaw Inserts 2-564C-4399 Jaw Inserts 2-564C-4400 Replacement Pipe Jaw Insert 2-564C-4401 Pipe Jaw Inserts 2-564C-4402 Pipe Jaw Inserts 2-564C-4403 Pipe Jaw Inserts 2-564C-4404 Green Replacement Window 2-904C-4411 Aircraft Drill, 1/16" 2-304C-4412 Aircraft Drill, 3/32" 2-304C-4413 Aircraft Drill, 1/8" 2-304C-4414 Aircraft Drill, 5/32" 2-304C-4415 Aircraft Drill, 3/16" 2-304C-4416 Aircraft Drill, 7/32" 2-304C-4417 Aircraft Drill, 1/4" 2-304C-4418 Aircraft Drill, 9/32" 2-304C-4419 Aircraft Drill, 5/16" 2-304C-4420 Aircraft Drill, 11/32" 2-304C-4421 Aircraft Drill, 3/8" 2-304C-4422 Aircraft Drill, 13/32" 2-304C-4423 Aircraft Drill, 7/16" 2-304C-4424 Aircraft Drill, 15/32" 2-304C-4425 Aircraft Drill, 1/2" 2-304C-4426 Extension, Drill 22--33004C-4463 Plastic Divided Utility w/

Hinged Lid Box 1-864C-4511 Fuel Line 2-1234C-4512 Valve Assy 2-1234C-4513 Hose Adapter 2-1234C-4514 Plug, Spark 2-1234C-4515 Shrinkfast Shrink Gun 22--1122334C-4516 Regulator Assy 2-1234C-4517 Gauge (Pressure) 2-1234C-4518 U.L. Guard 2-1234C-4600 Mailer Container -

Reusable, Tube 2-112, 2-113, 2-1144C-4601 Spark Plug Socket 11--44444C-4609 Cooling System Cleaner,

Quick Flush, 1 pt 3-134C-4610 Cooling System Cleaner,

Quick Flush, 1 qt 3-134C-4611 Cooling System Cleaner,

Quick Flush, 1 gal 3-134C-4612 Cooling System Cleaner,

Quick Flush, 5 gal 3-134C-4613 Cooling System Cleaner,

Quick Flush, 55 gal 3-134C-4730 Eng. Repair Indicator Kit Case 1-854C-4763 Disc Holder, 914, 4" Diameter 2-7, 2-8,

2-104C-4764 Disc Holder, 914, 4" Diameter 2-7, 2-8,

2-104C-4765 Holder, Disc, 914, 4" Diameter 2-104C-4776 Handwrapper 2-1204C-4777 Handwrapper 2-1204C-4779 Adjustable Stretch Band-it Tool 22--1122004C-4780 Stretch Band-it Tool 22--1122004C-4781 Stretch Band-it Stand 22--1122004C-4783 Plastic Divided Utility w/

Hinged Lid Box 1-864C-4787 Plastic Divided Utility w/

Hinged Lid Box 1-86


Part Number Index


4C-4789 Plastic Divided Utility w/ Hinged Lid Box 1-86

4C-4804 Penetrant, Aerosol 3-234C-4805 Developer, Aerosol 3-234C-4870 Utility Knife 1-544C-4871 Utility Knife Blades 1-544C-4880 Heavy-Duty Master Wrap Film, 5" 22--1122004C-4910 Fast Charger, Battery 6/12/24 Volt 2-604C-4912 Growler Aramture Tester

120 V 50/60 hz 2-604C-4913 Multi-Battery Parallel Charger 2-594C-4914 Multi-Battery Parallel Charger 2-594C-4917 Bar Set, Bus for Parallel Charging 22--55994C-4920 Heavy-Duty Commercial

Fast Charger 2-604C-4921 Heavy-Duty Commercial

Fast Charger 2-604C-4924 Portable Charger 22--66004C-4925 Portable Charger 22--66004C-4929 Starting System, Heavy-Duty

Plug-In 22--66224C-4930 Starting System, Ex. Heavy-Duty

Plug-In 22--66334C-4931 Power Socket, Flush Mount 22--66224C-4933 Booster Cable, 12 2-614C-4934 Booster Cable, 12 2-614C-4935 Booster Cable, 15 2-614C-4936 Booster Cable, 20 2-614C-4938 Booster Cable, 15 2-614C-4940 Replacement Clamp 2-624C-4942 Replacement Clamp 2-624C-4943 Power Socket

with Battery Cable 2-61, 2-624C-4944 Plug-In Cable 2-624C-4945 Power Socket 2-624C-4946 Polarized Lexan Plug 2-624C-4957 Rethreading Pipe Die, Hexagon 2-334C-4958 Rethreading Pipe Die, Hexagon 2-334C-4959 Rethreading Pipe Die, Hexagon 2-334C-4960 Rethreading Pipe Die, Hexagon 2-334C-4961 Rethreading Metric Die, Hexagon 2-334C-4962 Rethreading Metric Die, Hexagon 2-334C-4963 Hexagon Rethreading

Metric Die Set 2-334C-4965 Metric Size Tap, Plug 2-354C-4966 Metric Size Tap, Plug 2-354C-4967 Metric Size Tap, Plug 2-354C-4968 Metric Size Tap, Plug 2-354C-4969 Metric Size Tap, Plug 2-354C-4970 Metric Size Tap, Plug 2-354C-4971 Hand Tap, Fractional Size,

Bottoming 2-324C-4972 Hand Tap, Fractional Size,












Bottoming 2-32

4C-4984 Hand Tap, Fractional Size, Bottoming 2-32





4C-4989 Hand Tap, Fractional Size, Taper 2-324C-4990 Hand Tap, Fractional Size, Taper 2-324C-4991 Hand Tap, Fractional Size, Taper 2-324C-4992 Hand Tap, Fractional Size, Taper 2-324C-4993 Hand Tap, Fractional Size, Taper 2-324C-4994 Hand Tap, Fractional Size, Taper 2-324C-4995 Hand Tap, Fractional Size, Taper 2-324C-4996 Hand Tap, Fractional Size, Taper 2-324C-4997 Hand Tap, Fractional Size, Taper 2-324C-4998 Hand Tap, Fractional Size, Taper 2-324C-4999 Hand Tap, Fractional Size, Taper 2-324C-5000 Hand Tap, Fractional Size, Taper 2-324C-5001 Hand Tap, Fractional Size, Taper 2-324C-5002 Hand Tap, Fractional Size, Taper 2-324C-5003 Hand Tap, Fractional Size, Taper 2-324C-5004 Hand Tap, Fractional Size, Taper 2-324C-5005 Hand Tap, Fractional Size, Taper 2-324C-5006 Hand Tap, Fractional Size, Taper 2-324C-5007 Hand Tap, Fractional Size, Taper 2-324C-5008 Hand Tap, Machine Screw, Taper 2-314C-5009 Hand Tap, Machine Screw, Taper 2-314C-5010 Hand Tap, Machine Screw, Taper 2-314C-5011 Hand Tap, Machine Screw, Taper 2-314C-5012 Hand Tap, Machine Screw, Taper 2-314C-5013 Hand Tap, Machine Screw, Taper 2-314C-5014 Hand Tap, Machine Screw, Taper 2-314C-5015 Hand Tap, Machine Screw,

Bottoming 2-314C-5016 Hand Tap, Machine Screw,

Bottoming 2-314C-5017 Hand Tap Machine Screw,





Bottoming 2-314C-5026 Tap Wrench, Slip Handle, 2 3/4" 2-364C-5027 Tap Wrench, Plain Handle, 2 3/4" 2-364C-5028 Tap Wrench Long Shank, 8 3/4" 2-364C-5029 Tap Wrench, Ratchet, 3 3/4" 2-364C-5051 Plug Tap, 11/4-637-2B 2-324C-5300 Flexible Gasket Maker 3-64C-5492 Torque Wrench, 3/8" Drive Size 1-584C-5494 Rethreading Fractional Die,

Hexagon 2-334C-5495 Rethreading Fractional Die,



Hexagon 2-334C-5522 Chemical-resistant Nitrile Gloves,

Sz 9, Bulk-6 Pair 2-95, 2-102, 2-1034C-5523 Chemical-resistant Nitrile Gloves,

Sz 10, Bulk-6 Pair 2-95, 2-102, 2-1034C-5526 Nitrile-coated Knit-lined Gloves,

Lg, Bulk-12 Pair 22--9955, 2-102, 2-1034C-5527 Neox Gloves with Neoprene

Coating, Bulk 22--99554C-5529 Neoprene-coated

Knit-lined Gloves 22--99664C-5530 Extractor Set, Straight Tapered 2-454C-5584 Brake Fluid, DOT 3, 1 pt 3-33

4C-5585 Brake Fluid, 1 qt, DOT 3 3-334C-5586 Brake Fluid, 1 gal, DOT 3 3-334C-5588 Brake Fluid, 1 qt, DOT 5 3-334C-5589 Brake Fluid, 1 gal, DOT 5 3-334C-5591 Cat Thread Lub./Anti-Seize,

4 oz Brush-top Can 3-274C-5592 Cat Thread Lub./Anti-Seize,

8 oz Brush-top Can 3-274C-5593 Thread Lubricant 3-274C-5598 High Temperature Anti-Seize 3-274C-5599 High Temperature Anti-Seize 3-274C-5623 Smoke Candles 33--22334C-5637 Post Set 22--66224C-5638 Post Set 22--66224C-5647 Pry Bars, 54" 1-464C-5742 Pry Bars, 46" 1-8, 1-464C-5746 Air Powered Siphon Cleaning Gun 11--77334C-5819 Torque Wrench Service Kit 1-584C-5842 Black Paint, Flat, 12 oz. Aerosol 3-384C-5843 Black Paint, High Gloss,

12 oz. Aerosol 3-384C-5877 Electric Tie Strap Tightener 22--1122444C-5894 Tap 2-354C-5912 Storage Chest, 10 Drawer 11--88224C-6122 Yellow Paint, High Gloss, 5 gal 3-384C-6127 Yellow Paint, High Gloss, Drum 3-384C-6129 Yellow Paint, High Gloss, 1 gal 3-384C-6130 Paint and Primer Thinner

with Retarder, 1 gal 3-404C-6153 End Wire Brush, 1/4" Shank,

Crimped Wire 2-44C-6154 End Wire Brush, 1/4" Shank,

Crimped Wire 2-44C-6157 End Wire Brush, 1/4" Shank,

Crimped Encap. Flair-Flex 2-34C-6158 End Wire Brush, 1/4" Shank,

Knot Style 2-34C-6160 Brush, Tube, 3" Brush Face,

24" O.A.L. 2-44C-6161 Tube Brush, 3" Brush Face,

24" O.A.L. 2-44C-6172 Socket Wrench, Special Large,

1/2" Drive 1-434C-6193 Micofiche Viewer, Hand Held 22--1111004C-6322 Surface Reconditioning Flex

Hone Tools, 180 Grit 2-254C-6323 Surface Reconditioning Flex















Hone Tools, 320 Grit 2-25



Part Number Index

4C-6338 Surface Reconditioning Flex Hone Tools, 320 Grit 2-25




4C-6342 Cylinder Washing Brush, 3 1/2" Dia. 2-44C-6343 Cylinder Washing Brush, 4" Dia. 2-44C-6344 Cylinder Washing Brush, 5 1/2" Dia. 2-44C-6345 Cylinder Washing Brush, 6" Dia. 2-44C-6346 Cylinder Washing Brush, 6 1/2" Dia. 2-44C-6347 Cylinder Washing Brush, 7" Dia. 2-44C-6348 Cylinder Washing Brush, 7 1/2" Dia. 2-44C-6349 Cylinder Washing Brush, 8" Dia. 2-44C-6350 Cylinder Washing Brush, 9" Dia. 2-44C-6382 Insulators Cold Shrink 2-774C-6383 Insulators, Cold Shrink 2-774C-6384 Insulators, Cold Shrink 2-774C-6385 Insulators, Cold Shrink 2-774C-6386 Insulators, Cold Shrink 2-774C-6387 Heat Shrinking Tubing 2-764C-6388 Heat Shrinking Tubing 2-764C-6389 Heat Shrinking Tubing 2-764C-6390 Heat Shrinking Tubing 2-764C-6391 Heat Shrinking Tubing 2-764C-6392 Rubber Mastic Tape 22--1111994C-6393 Rubber Splicing Compound 22--77664C-6394 Heat Shrinking Butt Connector 2-774C-6395 Heat Shrinking Butt Connector 2-774C-6396 Heat Shrinking Butt Connector 2-774C-6477 Portable Fluorescent

Work Lights, 110V 2-71, 2-724C-6478 Portable Fluorescent

Work Light, 50 2-71, 2-724C-6479 Portable Fluorescent

Work Light, 40 2-71, 2-724C-6507 Air Powered Caulking Gun,

Heavy-Duty 33--774C-6508 Fill Tube 3-284C-6570 Masking Tape,

General Purpose, 3/4" 2-1164C-6571 Masking Tape,

General Purpose, 1 in 2-1164C-6572 Masking Tape,

General Purpose, 2 in 2-1164C-6573 Masking Tape,

General Purpose, 3 in 2-1164C-6581 Ear Muffs, Sound-Off

Cap-Mounted 22--88114C-6715 Thermally Conductive RTV Kit 33--77, 3-274C-6722 Hexagon Rethreading Metric Die 2-334C-6723 Impact Socket, 36 mm,

6 Pt. 1" Drive, Std. Length 1-194C-6724 Impact Socket, 46 mm,

6 Pt. 1" Drive, Std. Length 1-344C-6741 Lamp Module 2-684C-6767 Oil, Compactor 3-314C-6774 Gun Vac Vacuum Unit 1-744C-6775 Reusable Bag for Gun Vac Unit 1-744C-6776 Straight Ext for Gun Vac Unit, 18" 1-744C-6778 Spray Gun Canister 1-744C-6779 Pneumatic Oil Gun 1-744C-6792 V.C.I Oil, 1 qt 3-304C-6793 V.C.I Oil, 1 gal 3-304C-6794 V.C.I Oil, 5 gal 3-304C-6795 V.C.I Oil, 55 gal 3-304C-6796 Mineral Spirits, 5 gal 3-254C-6797 Mineral Spirits, 55 gal 3-254C-6830 Jaw Cap, Model

R- Rubber Face Magnefix, 4" 2-574C-6831 Jaw Cap, Model

R- Rubber Face Magnefix, 4 1/2" 2-574C-6832 Jaw Cap, Model

R- Rubber Face Magnefix, 5" 2-57

4C-6833 Jaw Cap, Model R- Rubber Face Magnefix, 6 2-57

4C-6834 Jaw Cap, Model P - Prism Magnefix, 4" 2-57

4C-6835 Jaw Cap, Model P - Prism Magnefix, 4 1/2" 2-57



4C-6922 Caulking Gun, 1/10 g Sup E-Z Thrust 33--774C-6923 Caulking Gun, 1/10 g Sup Rat Type 33--884C-6924 Tap, Metric Size, Bottoming 2-354C-6962 Pipe Wrench, Heavy-Duty, 10" 1-514C-6963 Pipe Wrench, Heavy-Duty, 12" 1-514C-6964 Pipe Wrench, Heavy-Duty, 14" 1-514C-6965 Pipe Wrench, Heavy-Duty, 18" 1-514C-6972 Pipe Wrench, Heavy-Duty, 24" 1-514C-6973 Aluminum Pipe Wrench, 10" 1-504C-6974 Aluminum Pipe Wrench, 14" 1-504C-6975 Aluminum Pipe Wrench, 18" 1-504C-6976 Aluminum Pipe Wrench, 24" 1-504C-6977 Tubing Cutter, Quick Release, 6" 1-514C-6978 Tubing Cutter, Quick Release, 8" 1-514C-6979 Tubing Cutter, Quick Release, 11" 1-514C-6980 Cutting Wheel 1-514C-6981 Cutting Wheel 1-514C-6982 Cutting Wheel for Copper,

Aluminum, Brass, Steel 1-514C-6994 Impact Socket, 1 1/2",

12 Pt., 3/4" Drive, Std. 1-194C-8093 Safety Glasses, Mocha,

Eyebrow and Sideshield 2-854C-8095 Heavy-Duty Headgear 22--88994C-8096 Clear Polycarbonate Window 2-894C-8097 Window, Dark Green

for Glare Reduction 2-894C-8102 Floor Mat, Diamond Plate

Sponge Cote, 2' x 3' 2-1084C-8103 Floor Mat, Diamond Plate

Sponge Cote, 3' x 5' 2-1084C-8104 Floor Mat, Safety-Zone Interlock,

Center Unit 2-1094C-8105 Floor Mat, Safety-Zone Interlock,

End Unit 2-1094C-8106 Floor Mat 2-1094C-8107 Floor Mat, Safety-Zone Interlock,

End Unit 2-1094C-8108 Floor Mat, TileTop Sponge-Cote,

18" x 30" 2-1094C-8109 Floor Mat, TileTop Sponge-Cote,



36" x 60" 2-1094C-8112 Floor Mat, Ultra-Tred Armor Cote,

2' x 3' 2-1094C-8113 Floor Mat, Ultra-Tred Armor Cote,



3' x 60' 2-1094C-8116 Floor Mat, Abrasive Coated

Kushion Walk, 2' x 30' 2-1094C-8117 Floor Mat, Abrasive Coated





Kushion Walk, 3' x 6' 2-109

4C-8217 Impact Socket, 55mm, 6 Pt, 1in Drive Deep Length 1-34

4C-8339 Conostan Oil Stds 3-334C-8340 Conostan Oil Stds 3-334C-8341 Conostan Oil Stds 3-334C-8342 Conostan Oil Stds 3-334C-8343 Conostan Oil Stds 3-334C-8344 Conostan Oil Stds 3-334C-8351 Safety Glasses, Mocha,

Eyebrow and Sideshield 2-854C-8364 Master Thread Repair Set,

Inch Coarse, Heli-Coil 4934 2-37, 2-384C-8365 Master Thread Repair Set,

Inch Coarse, Heli-Coil 4936 2-37, 2-384C-8366 Metric Master Thread Repair Set,

Heli-Coil 4937-150 22--3388, 2-394C-8367 Master Thread Repair Set,

Heli-Coil 4937-125 22--33994C-8368 Screw Thread Insert,

Inch Coarse Thread Repair Kit 2-384C-8369 Screw Thread Insert,




Inch Coarse Thread Repair Kit 2-384C-8373 Insert, Screw Thread,










Inch Fine Thread Repair Kit 2-384C-8383 Screw Thread Insert,














Inch Fine Thread Repair Kit 2-38


Part Number Index


4C-8397 Screw Thread Insert,Inch Fine Thread Repair Kit 2-38

4C-8398 Screw Thread Insert Kit (Heli-Coil) 2-394C-8399 Screw Thread Insert Kit (Heli-Coil) 2-394C-8400 Screw Thread Insert Kit (Heli-Coil) 2-394C-8401 Screw Thread Insert Kit (Heli-Coil) 2-394C-8402 Screw Thread Insert Kit (Heli-Coil) 2-394C-8403 Screw Thread Insert Kit (Heli-Coil) 2-394C-8404 Screw Thread Insert Kit (Heli-Coil) 2-394C-8405 Screw Thread Insert Kit (Heli-Coil) 2-394C-8406 Screw Thread Insert Kit (Heli-Coil) 2-394C-8407 Screw Thread Insert Kit (Heli-Coil) 2-394C-8408 Screw Thread Insert Metric

Fine Repair Kit 2-394C-8409 Screw Thread Insert Metric







Fine Repair Kit 2-394C-8416 Screw Thread Insert Kit (Heli-Coil) 2-394C-8417 Screw Thread Insert Kit (Heli-Coil) 2-394C-8418 Screw Thread Insert Kit (Heli-Coil) 2-394C-8419 Inch Coarse Screw Thread

Insert, (Heli-Coil) 2-37, 2-38, 2-404C-8420 Inch Coarse Screw Thread





Insert, (Heli-Coil) 2-38, 2-404C-8425 Inch Coarse Screw Thread








Insert, (Heli-Coil) 2-38, 2-404C-8433 Inch Fine Screw Thread

Insert, (Heli-Coil) 2-37, 2-38, 2-404C-8434 Inch Fine Screw Thread








Insert, (Heli-Coil) 2-38, 2-40

4C-8442 Inch Fine Screw Thread Insert, (Heli-Coil) 2-38, 2-40





4C-8447 Inch Fine Screw Thread Insert (Heli-Coil) 2-38, 2-40

4C-8448 Metric Coarse Screw Thread Insert (Heli-Coil) 2-38, 2-39, 2-40


4C-8450 Metric Coarse Screw Thread Insert (Heli-Coil) 2-39, 2-40








4C-8458 Metric Fine Screw Thread Insert 2-39, 2-40








4C-8466 Insert, Screw Thread, Spark Plug 2-39, 2-40

4C-8467 Spark Plug Screw Thread Insert 2-39, 2-40

4C-8468 Tap Screw Thread Insert (Heli-Coil)2-384C-8469 Tap Screw Thread Insert (Heli-Coil)2-384C-8470 Tap Screw Thread Insert (Heli-Coil)2-384C-8471 Tap Screw Thread Insert (Heli-Coil)2-384C-8472 Tap Screw Thread Insert (Heli-Coil)2-394C-8473 Tap Screw Thread Insert (Heli-Coil)2-394C-8474 Tap Screw Thread Insert (Heli-Coil)2-394C-8475 Tap Screw Thread Insert

(Heli-Coil) 2-38, 2-39, 2-404C-8476 Metric Fine Tap Screw

Thread Insert 2-394C-8477 Metric Fine Tap Screw

Thread Insert 2-394C-8478 Tap Screw Thread Insert

(Heli-Coil) 2-394C-8479 Tap Screw Thread Insert

(Heli-Coil) 2-394C-8480 Drill 2-384C-8481 Drill 2-384C-8482 Drill 2-384C-8483 Drill 2-384C-8485 Installation Tool Screw Thread

Insert (Heli-Coil) 2-384C-8486 Installation Tool Screw Thread

Insert (Heli-Coil) 2-38

4C-8487 Installation Tool Screw Thread Insert (Heli-Coil) 2-38




4C-8491 Insert, Screw Thread, Installation Tool (Heli-Coil) 2-39

4C-8492 Metric Fine Installation Tool Screw Thread Insert 2-39





4C-8497 Screw Thread Insert (Heli-Coil) 2-38, 2-40

4C-8510 Ferrous Oxide Crocus Sheets 2-234C-8511 Flap Wheel, 1" x 1", 60 grit 2-184C-8512 Flap Wheel, 1" x 1", 120 grit 2-184C-8513 Flap Wheel, 1" x 1", 180 grit 2-184C-8514 Flap Wheel, 2" x 1", 60 grit 2-184C-8515 Flap Wheel, 2" x 1", 120 grit 2-184C-8516 Flap Wheel, 2" x 1", 180 grit 2-184C-8517 Flap Wheel, 3" x 1", 60 grit 2-184C-8518 Flap Wheel, 3" x 1", 120 grit 2-184C-8519 Flap Wheel, 3" x 1", 180 grit 2-184C-8520 Flap Wheel Adapter, 1/4" x 1" 2-184C-8521 Flap Wheel Adapter, 1/4" x 4" 2-184C-8522 Screen Durite RL, 1 1/2"x25 2-23, 2-274C-8523 Screen Durite RL, 1 1/2"x25 2-23, 2-274C-8524 Screen Durite RL, 1 1/2"x25 2-23, 2-274C-8624 Cleaning & Polishing Star,

1 1/2" Dia. 2-244C-8625 Cleaning & Polishing Star, 2" Dia. 2-244C-8626 Cleaning & Polishing Star, 3" Dia. 2-244C-8627 Cleaning & Polishing Star, 4" Dia. 2-244C-8628 Cleaning & Polishing Star,

4 1/2" Dia. 2-244C-8629 Mandrel Adapter 2-244C-8630 Spindle Mounted Flap Brush,

CPFB-S A Medium 2-54C-8637 Disc, Clean ‘N Strip 1/4",

Spindle Mounted 2-134C-8638 Disc, Clean ‘N Strip 1/4",

Spindle Mounted 2-134C-8648 Hydrosolv 4110,

Heavy-Duty Cleaner, 1 gal 3-104C-8649 Hydrosolv 4110,

Heavy-Duty Cleaner, 5 gal 3-104C-8650 Hydrosolv 4110,

Heavy-Duty Cleaner, 55 gal 3-104C-8651 Caterpillar Aluminum Safe

Paint Stripper, 1 gal. 3-404C-8652 Caterpillar Aluminum Safe

Paint Stripper, 5 gal. 3-404C-8653 Caterpillar Aluminum Safe

Paint Stripper, 55 gal. 3-404C-8733 Taper Gauge 11--55004C-8761 Dust/Mist Respirator, Case 2-814C-8856 Quick-Connect Nipple, 1/2" m 1-624C-8996 Metric Hex Ball Drivers 1-314C-9297 Coolant Conditioner

Test Strip Bottle 3-134C-9301 Coolant Conditioner Test Kit 3-134C-9306 Crowfoot Wrench, 12D3/16" 1-124C-9442 Heavy-Duty Flashlight, 14 3/4" 2-674C-9446 Black Nylon Full Flap Holster

for 1U7323 2-674C-9447 Black Leather Holster for 1U7323 2-674C-9448 Clamp Kit Mounting for

D Cell Flashlights 2-67



Part Number Index

4C-9449 D Cell 6V Nicad Battery Pack 2-674C-9463 Flashlight Bulb 2-67, 2-684C-9464 Flashlight Bulb 2-67, 2-684C-9465 Flashlight Bulb 2-67, 2-684C-9466 Flashlight Bulb 2-67, 2-684C-9470 Halogen Replacement Bulb 2-67, 2-684C-9501 Gasket Compound No. 1 33--664C-9502 Gasket Compound No. 2 33--664C-9505 Gasket Compound No. 3 33--664C-9506 Retaining Compound 3-34C-9507 Retaining Compound 3-1, 3-34C-9509 Wicking Sealant, 1.69 fl oz. 3-44C-9563 Heavy-Duty Box Wrench, 24 mm 1-594C-9565 Heavy-Duty Box Wrench, 36 mm 1-594C-9592 Combination Wrench, 3/8" 1-1, 1-3, 1-4,

1-5, 1-7, 1-23, 1-244C-9593 Combination Wrench, 7/16" 1-1, 1-3,

1-23, 1-244C-9594 Combination Wrench, 1/2" 1-1, 1-3, 1-4,

1-5, 1-23, 1-244C-9595 Combination Wrench, 9/16" 1-1, 1-3, 1-4,

1-5, 1-7, 1-23, 1-244C-9596 Combination Wrench, 5/8" 1-1, 1-3, 1-4,

1-23, 1-244C-9597 Combination Wrench, 11/16" 1-1, 1-3,

1-4, 1-23, 1-244C-9598 Combination Wrench, 3/4" 1-1, 1-3, 1-4,

1-5, 1-7, 1-23, 1-244C-9599 Combination Wrench, 13/16" 1-1, 1-3,

1-23, 1-244C-9600 Combination Wrench Set,

Std. Length, 11 Piece 1-8, 11--22334C-9601 Combination Wrench, 7/8" 1-1, 1-3, 1-4,

1-23, 1-244C-9602 Combination Wrench, 15/16" 1-1, 1-3,

1-23, 1-244C-9603 Combination Wrench, 1" 1-1, 1-3, 1-4,

1-23, 1-244C-9604 Combination Wrench, 1/4" 1-1, 1-3, 1-23,

1-244C-9605 Combination Wrench, 5/16" 1-1, 1-3, 1-4,

1-23, 1-244C-9606 Combination Wrench, 3/8" 1-23, 1-244C-9607 Combination Wrench, 7/16" 1-23, 1-244C-9608 Combination Wrench, 1/2" 1-23, 1-244C-9609 Combination Wrench, 5/8" 1-23, 1-244C-9610 Combination Wrench Set,

Std. Length, 9 Piece 11--22334C-9611 Combination Wrench, 11/16" 1-23, 1-244C-9612 RTV Adhesive/Sealant,

Ultra-Black, 3 fl oz 3-74C-9613 RTV Adhesive/Sealant, Clear, 3 fl oz 3-74C-9614 RTV Adhesive/Sealant, Red, 3 fl oz 3-74C-9616 Welding Blanket (6 ft x 6 ft) 2-844C-9617 Blanket (6 ft x 8 ft) 2-844C-9618 Blanket (6 ft x 10 ft) 2-844C-9619 First Aid Blanket 22--77994C-9620 Heavy-Duty Flashlight, 8" 2-674C-9645 Bottoming Tap 2-354C-9650 Pelican Protector Equipment Case 1-874C-9651 Replacement Foam Set, 3 pc. 1-874C-9652 Pelican Protector Equipment Case 1-874C-9653 Replacement Foam Set, 3 pc. 1-874C-9654 Pelican Protector Equipment Case 1-874C-9655 Replacement Foam Set, 3 pc. 1-874C-9656 Pelican Protector Equipment Case 1-874C-9657 Replacement Foam Set, 3 pc. 1-874C-9658 Protective Case 1-874C-9659 Replacement Foam Set, 3 pc. 1-874C-9660 Pelican Protector Equipment Case 1-874C-9661 Replacement Foam Set, 4 pc. 1-874C-9662 Pelican Protector Equipment Case 1-874C-9663 Replacement Foam Set, 3 pc. 1-874C-9664 Travel Vault 1-874C-9665 Replacement Foam Set, 3 pc. 1-874C-9681 Tap Screw Thread Insert

(Heli-Coil) 2-37, 2-38

4C-9682 Tap Screw Thread Insert (Heli-Coil) 2-37, 2-38




4C-9686 Tap Screw Thread Insert (Heli-Coil) 2-37, 2-38, 2-40







4C-9700 Tap Screw Thread Insert (Heli-Coil) 2-38









4C-9715 Metric Fine Tap Screw Thread Insert 2-39

















4C-9739 Replacement O-ring 1-874C-9741 Replacement O-ring, 1-874C-9742 Replacement O-ring 1-87

4C-9743 Replacement O-ring 1-874C-9744 Replacement O-ring 1-874C-9745 Replacement O-ring 1-874C-9746 Replacement O-ring 1-874C-9747 Taper Pipe Tap 2-354C-9748 Socket, 55 mm (2-3/16") 1-194C-9787 Impact Socket, 1 3/16 in 1-194C-9798 Block Magnet 11--55004C-9799 Multi-Battery Parallel Charger 2-594C-9800 Growler Armature Tester 2-604C-9801 Cable 2-614C-9802 Cable 2-614C-9812 Socket Wrench 1-624C-9813 Socket Extention (spline drive)1-34, 1-624C-9814 Reaction Bar 1-344C-9818 Hex Shank 11--22334C-9819 Universal Joint 11--22334C-9820 Port Microfiche Read w/

One Lens & 120 VAC Transform 22--1111004C-9822 Transformer, 120 VAC 2-1104C-9824 Cigarette Adapter, 12 VDC 2-1104C-9825 Microfiche Reader Carrying Case 2-1104C-9826 Spare Lamp, 9W, 6V, FKY 2-1104C-9827 Bifold Microfiche Holder

w/ 30 Slots 2-1104C-9917 Power with Battery Cable Socket 2-61,

2-634C-9928 Heavy-Duty Variable

Speed Drill, 3/8" (10 mm) 1-754C-9942 Saw Blade, 6", 18 teeth 1-764C-9943 Saw Blade, 6", 14 teeth 1-764C-9944 Saw Blade, 9", 5/7 teeth 1-764C-9945 Saw Blade, 12", 6 teeth 1-764C-9946 Cab Glass Filler Strip Tool Assy 1-544D-0514 Pipe-Allen Drive Plugs,1/16-27 2-504F-4879 Hex Head Bolt, 3/8-16 x 1/2 in,

bulk 2-1294F-5166 Pry Bar, Long, 30" 1-464H-0119 HeliCoil Insert Inst. G. Pilot 2-404J-4382 Pipe-Hex Head Plugs, 1/2-14 2-494J-7533 Charging Adapt. Nozzle

Tester Group Seal 2-494K-0367 Full Nut, 5/8-11, bulk 2-1294K-1388 Seal 2-494S-7325 Repair Kit 1-204S-7326 Repair Kit 1-204S-7327 Service Kit Torque Wrench 1-14, 1-215B-3254 Nut, Adapter Group, Flywheel 1-395B-9169 Pipe-Square Head Plugs, 1/2-14 2-495D-1026 Hose Clamp, 16 mm - 27 mm, bulk 2-1295F-4763 Chest, 6 Drawer 1-835F-4764 Crowfoot Prybar, 16" Long 1-2, 1-3, 1-4,

1-5, 1-6, 1-7, 1-8, 1-9, 1-465H-2471 Cement - Bond, Seal, Patch 3-45H-4017 Cover, 50" line, Hyd. Test G. 2-505H-4018 Cover, 75" line, Hyd. Test G. 2-505H-4019 Cover, 1.00" line, Hyd. Test G. 2-505H-4020 Cover, 1.25" line, Hyd. Test G. 2-505H-4845 Cab Glass Seal Installation

Tool Assy 1-545H-4846 Handle, Cab Glass Installation Tool 1-545H-4847 End, Cab Glass Installation Tool 1-545H-4848 Bit, Cab Glass Installation Tool 1-545H-8146 HeliCoil Insert Inst. Group Insert 2-405H-8147 HeliCoil Insert Inst. Group Nib 2-405H-8148 HeliCoil Insert Inst. Group Pilot 2-405M-2894 Hard Washer, 3/8 in, bulk 1-61, 2-1295M-6213 Tire Inflation Plug, 1/4"-18NPT 2-495M-6214 Pipe-Hex Head Plugs, 1/8-27 2-495N-5561 Silicone Lubricant 3-285P-0045 Blocking Cover 2-505P-0046 Blocking Cover 2-505P-0047 Blocking Cover 2-505P-0048 Blocking Cover 2-505P-0049 Blocking Cover 2-505P-0050 Blocking Cover 2-505P-0127 Glow Plug Socket 1-17


Part Number Index


5P-0144 Socket Wrench, 1/2 inch drive 1-365P-0166 Fuel Line Crowfoot Wrench 1-595P-0167 Wrench 1-365P-0250 Stud Remover Group 2-475P-0294 Engine Timing Crowfoot Wrench 1-125P-0324 Crowfoot Wrench, 5/8" 1-125P-0325 Crowfoot Wrench, 11/16" 1-125P-0326 Crowfoot Wrench, 3/4" 1-125P-0327 Crowfoot Wrench, 13/16" 1-125P-0328 Crowfoot Wrench, 7/8" 1-12, 1-215P-0329 Crowfoot Wrench, 15/16" 1-125P-0331 Crowfoot Wrench, 1" 1-125P-0332 Crowfoot Wrench, 1 1/16" 1-125P-0333 Crowfoot Wrench, 1 1/8" 1-125P-0334 Crowfoot Wrench, 1 1/4" 1-125P-0335 Crowfoot Wrench, 1 3/8" 1-125P-0336 Crowfoot Wrench Group, 12 Point 11--11225P-0537 Hard Washer, 1/4 in, bulk 2-1285P-0597 Hose Clamp, 45 mm - 67 mm, bulk 2-1295P-0598 Hose Clamp, 54 mm - 105 mm, bulk 2-1295P-0946 Hyd. Sys. Pressure Gauge

Kit Box Assy 1-8, 1-835P-0954 Socket Wrench,

Special Large, 3/4" Drive 1-435P-0960 Advanced 3Moly Grease,

Grade 2, cartridge, 397 g 3-215P-1228 Transmission/Drive Train Oil, 50 3-175P-1661 Hitch Pin Sledge Wrench, 4-1/4" 1-395P-1662 Hitch Pin Socket, 4-1/4" 1-195P-1717 Hose Clamp, 108 mm - 130 mm,

bulk 2-1295P-1720 Seal Pick 1-3, 11--55445P-1745 Std. Length Socket,

7/8 in, 6 Pt., 1 in Drive, 1-195P-1748 Std. Length Socket,

2 1/4", 6 Pt., 1" Drive 1-19, 1-235P-1749 Universal Drive, 1" Drive 1-235P-2299 Tee Test TG Plug, 15/16" 2-495P-2410 Hand Impact Wrench 11--66555P-2417 HeliCoil Insert Inst. G. Tap Group 2-405P-2418 HeliCoil Insert Group Drill Guide 2-405P-2586 Diesel Engine Oil, 10W-30 3-145P-2688 Spring 1-655P-2690 Ratchet 1-655P-2692 Head 1-655P-2693 Gasket 1-655P-2694 Spring 1-655P-2697 Handle Assembly 1-655P-2700 Side Plate Assembly 1-655P-2701 Side Plate Assembly 1-655P-2907 Coolant Additive 3-125P-2909 Tee Test TG Pump Group Plug, 3/4" 2-495P-3011 Fuel Pump Special Tap, 1"-14 NS 2-325P-3012 Fuel Pump Special Tap,

1-1/8"-12 NF 2-32, 2-355P-3013 Fuel Pump Special Tap,

1-3/8"-12 NF 2-325P-3038 Socket Assy, Hyd. Pump;

Circle Dr. Motor 1-165P-3053 Deep Length Impact Socket,

3/4 in Drive 1-195P-3054 Deep Length Impact Socket,

3/4 in Drive 1-195P-3277 Custom Track Service Kit Tape 1-3, 1-495P-3320 Pipe-square Head Plugs, 3/4-14 2-495P-3413 Pipe Sealant with Teflon 2-113, 3-1, 3-55P-3501 Adapter 9/16 inch 2-1135P-3534 Universal Drive, 3/4" Drive 1-235P-3540 Locknut Lift T Power Tr. Wrench 1-435P-3579 Track Bolt Socket, 1-3/32" 1-195P-3580 Track Bolt Socket, 1-9/32" 1-195P-3581 Track Bolt Socket, 1-15/32" 1-195P-3588 Torque Multiplier Adapter 1-225P-3920 Custom Track Service Kit Rule 1-35P-3931 High Temperature Anti-Seize 3-275P-3975 Tire Servicing Rubber Lubricant 33--22995P-4115 Washer 1-60

5P-4153 Sling, Tire, General Purpose 11--99005P-4200 LT Retain. Bolt Socket,

1/4" Dr., Misc. 1-175P-4205 Tee Wrench, 5/32"

(Low Idle Adjustment) 1-435P-4206 Sleeve Meter. Calibr. TG Wrench 1-435P-4238 Rethreading Fractional Die,

Hexagon 2-33, 2-345P-4299 Tee Test TG Plug, 13/16" 2-495P-4724 Lock Kit 11--88335P-4773 Adapter, 1/2" Drive,

5/8" 12 Point Box End 1-595P-4868 Hose Clamp, 60 mm - 82 mm, bulk 2-1295P-4996 Hyd. Sys. Pressure Gauge Kit Plug 2-495P-5148 Cable Tie 2-1245P-5195 Offset Wrench 1-365P-5197 Master Pin HD Snap Ring Pliers 11--55225P-5249 Pin Socket 11--22005P-5289 Artic Engine Oil, Synthetic 3-155P-6442 Hose 2-1135P-6587 Lock Removal Socket, 1/2" 1-445P-6588 Lock Removal Socket, 9/16" 1-445P-6589 Lock Removal Socket, 3/4" 1-445P-7040 Gear Oil, Synthetic, 75W-90 3-205P-7252 Hex Bit, 9/64" 1-155P-7253 Sleeve Metering Fuel System

Socket Assy 1-155P-7254 Double End Flare Nut Wrench,

Ind. Offset 1-415P-7255 Double End Flare Nut Wrench,

Ind. Offset 1-415P-7256 Double End Flare Nut Wrench,

Ind. Offset 1-415P-7260 Deep Lenght Socket,

1-1/8 in, 1/2 in Drive 1-185P-7320 Heavy Duty Box Wrench 1-395P-7367 Hitch Pin D&A Socket 1-435P-7414 A/C Compressor Repair

TG Seal Pick 11--55445P-7429 Torque Wrench Service Kit 1-585P-7443 Ratchet Wrench, 3/8" Sq. Drive 1-205P-7444 Repair Kit (20 tooth gear) 1-205P-7445 Repair Kit (optional 30 tooth gear) 1-205P-7684 Straight Thread O-ring-Allen

Drive Plugs, 1 7/8-12 2-495P-7970 Hex Nut, M8 x 1.25, bulk 2-1295P-8245 Hard Washer, 1/2 in, bulk 2-1295P-8247 Hard Washer, 5/8 in, bulk 2-1295P-8347 Hex Head Bolt,

M8 x 1.25, 70 mm, bulk 2-1295P-8676 Accessory Drive Gear Extension 1-215P-8689 Socket Assembly 1-165P-8937 Heat Sink Compound, 5 oz 3-275P-9210 Heat Sink Compound, 14 oz 3-275P-9617 Adapter Reducer 2-1135P-9709 Surface Recond. Disc,

A-Coarse, 7" Dia. 2-7, 2-85P-9718 Disk Holder, 7" Diameter 2-8, 2-105S-0003 Full Nut, 5/16-18, bulk 2-1295S-6076 Socket Extension, 8" 1-15, 1-21, 1-235S-6077 Std. Length Socket,

2 3/8", 6 Pt., 1" Drive 1-15, 1-195S-6078 Std. Length Socket,

2 1/2", 6 Pt., 1" Drive 1-15, 1-195S-6079 Hub Removal Final

Drive Socket 1-15, 1-195S-6080 Std. Length Socket,

2 3/4", 6 Pt., 1" Drive 1-15, 1-195S-6081 Socket, 3", 1" Drive 1-15, 1-195S-6082 Socket, 3 1/8", 1" Drive 1-15, 1-195S-6083 Socket, 3 1/4", 1" Drive 1-15, 1-195S-6084 Socket, 3 1/2", 1" Drive 1-15, 1-195S-6085 Socket, 3 5/8", 1" Drive 1-15, 1-195S-6086 Socket, 3 3/4", 1" Drive 1-15, 1-195S-6087 Socket, 4", 1" Drive 1-15, 1-195S-6088 Sledge Socket Wrench 1-155S-6089 Wrench Handle 1-15, 1-21, 1-22

5S-6090 Sliding Tee Wrench Head 1-15, 1-225S-6091 Ratchet Wrench, 1" Sq. Drive 1-15, 1-215S-6092 Metal Storage

w/ Hinged Lid Box 1-15, 1-835S-6093 Heavy-Duty Socket Set,

16 Piece, 1" Drive 11--11555S-6094 Repair Kit 1-15, 1-216A-5591 Hex Head Bolt,

M12 x 1.75, 25 mm, bulk 2-1296F-6946 Roll Set Rivet (for 3/16" rivets) 1-536F-6947 Star Set Rivet 1-536H-7378 Filter Strap Wrench

Retaining Ring 1-406K-0713 Hose 2-1136K-0806 Cable Strap,

355.6 mm x 4.9 mm, bulk 2-124, 2-1296K-6307 O-ring Seal 2-496L-4082 Race 1-606L-8355 Pipe-Allen Drive Plugs, 3/4-14 2-506V-0024 Socket, 1 1/2", 12 Pt., 1" Drive 1-196V-0094 Fuel Pump R&I Universal Joint 1-226V-0112 Repair Kit, Head, Pin & Washer 1-206V-0115 Rack Adjusting Wrench, 1/8" Hex 1-436V-0185 Surface Recond. Disc,

A-Coarse, 5" Dia. 2-7, 2-86V-0186 Disk Holder, 5" Diameter 2-8, 2-106V-0199 Std. Length Socket, 7/8",

12 Pt., 3/8" Drive 1-11, 1-176V-0852 Dust Cap 2-112, 2-113, 2-1146V-1820 Hex Head Bolt,

M10 x 1.5, 30 mm, bulk 2-1296V-1897 Pipe, Square Drive Plugs,

2-11 1/2 2-506V-2002 Track Bolt Socket, 29/32 in 1-196V-2010 Polishing Stone 22--22336V-2032 Valve Stem Cleaning

Adapter 2-16, 2-17, 2-186V-2033 Engine Valve Stem Brush 2-186V-2055 High Vacuum Grease 3-286V-2062 Master Pin HD Snap Ring Pliers Tip 1-526V-2091 Spiralock Thread Tap, 3/8"-16 2-356V-2104 Hollow Head Screw Hex Wrench,

3/32" 1-436V-2123 Lift Truck Vehicle Sys. Socket Assy 1-166V-2315 Hex Head Bolt, M6 x 1, 35 mm,

bulk 2-1296V-2317 Hex Head Bolt, M8 x 1.25, 30 mm,

bulk 2-1296V-3007 Sure Seal Repair Kit Box Assy 1-866V-3044 Crankshaft Bearing Journals

Polishing Belt 2-246V-3072 Case 1-856V-3073 Case 1-856V-3112 Start./Charg. Analyzer Group Base 1-856V-3146 Torque Wrench Tubular Extension 1-596V-3257 Pipe-Square Drive Plugs, 3 1/2-8 2-506V-3280 Pipe-Square Drive Plugs, 2 1/2-8 2-506V-3542 Cooling System Conditioner,1/2 pt 3-126V-3668 Hex Head Bolt,

M12 x 1.75, 30 mm, bulk 2-1296V-3822 Hex Head Bolt,




M8 x 1.25, 20 mm, bulk 2-1296V-3966 Pressure Test Valve 1/4 in 2-1136V-3989 Hyd. Sys. Test Quick Discon Nipple 1-86V-4058 Starting Sys.

R&I Universal Extension 1-226V-4079 Drive Assembly 1-606V-4081 Pinion 1-606V-4083 Gear 1-606V-4086 Cutting and Polishing Disc,

A-Medium 2-9



Part Number Index

6V-4087 Lift Truck Lift Cyl. Recond. Mandrel 2-9

6V-4094 Foam Block 1-856V-4143 Coupler As. Hyd. Sys. Test

(for 42000 KPA) 1-86V-4154 Heavy-Duty Box Wrench, 1 1/2 in 1-596V-4165 Heavy-Duty Box Wrench, 3/4 in 1-596V-4166 Heavy-Duty Box Wrench, 7/8 in 1-596V-4167 Heavy-Duty Box Wrench, 15/16 in 1-596V-4168 Heavy-Duty Box Wrench, 1 1/8 in 1-596V-4169 Heavy-Duty Box Wrench, 1 5/16 in 1-596V-4170 Torque Wrench Ext. Sq. Drive

Adapter, 3/4 in 1-596V-4171 Heavy-Duty Box Wrench, Offset,

15/16 in 1-596V-4175 Std. Length Socket, 27/32 in,

6 Pt., 1 in Drive 1-196V-4248 Hex Head Bolt,


M10 x 1.5, 50 mm, bulk 2-1296V-4511 Cooling System Cleaner, Standard 3-136V-4802 Valve Seat Extract. TG Wheel 2-256V-4873 Foam Block for Plastic

Storage Case, Black 1-856V-4876 Molykote Paste Lubricant 3-276V-5215 Hex Head Bolt,






M12 x 1.75, 45 mm, bulk 2-1296V-5839 Washer, M10, bulk 2-1296V-5842 Hex Head Bolt,


M10 x 1.5, 45 mm, bulk 2-1296V-6044 Water Ferrule TG Block 1-856V-6045 Case 1-856V-6067 Calibration Fluid, 208 Liter (55 gal) 3-336V-6068 Calibration Fluid, 18.9 l (5 gal) 3-336V-6080 Torque Multiplier 1-34, 1-60, 1-616V-6096 Torque Screwdriver TG Block 1-856V-6105 Block 1-61, 1-856V-6107 Insert, 1.1 Liter Engine 1-856V-6126 Foam Block for Plastic Storage

Case, Black 1-856V-6134 Protractor 1-606V-6135 Gear 1-606V-6136 Pinion 1-606V-6137 Dowl 1-606V-6139 Pin 1-606V-6192 Combination Pliers 1-2, 1-3, 1-516V-6193 Heavy-Duty Diagonal Pliers, 17 1/2" 1-2,

1-3, 1-516V-6194 Needle Nose Pliers, 16" 1-2, 1-3, 1-516V-6195 Interlocking Joint Pliers,

Multiple Position 1-2, 1-3, 1-8, 1-516V-6317 Hex Head Bolt,

M10 x 1.5, 20 mm, bulk 2-1296V-6640 Gasket Maker 3-66V-6762 Race 1-606V-7013 Rivet Roll Set, 5/32" 1-536V-7052 Rethreading Die, 1 5/16"-12 NF 2-346V-7145 Carrying Case 1-856V-7494 Tapered Dual-Function Cap/Plug 2-526V-7496 Tapered Dual-Function Cap/Plug 2-526V-7529 Adapter 1/8 in 2-1136V-7555 Cable Tie 2-1246V-7673 Hex Head Bolt, M12 x 1.75, 50 mm,

bulk 2-129

6V-7728 Hex Head Bolt, M6 x 1, 45 mm, bulk 2-129

6V-7820 Torque Multiplier 1-60, 1-616V-7874 Lift Truck Power Train Socket 1-19, 1-336V-7932 Screwdriver 1-2, 1-3, 1-4, 1-5, 1-6, 1-7,

1-9, 1-44, 1-456V-7933 Plastic Handle Screwdriver,

6" Blade 1-2, 1-3, 1-5, 1-8, 1-9, 1-44, 1-456V-7934 Black Plastic Handle Screwdriver

No. 2 Phillips 1-2, 1-3, 1-4, 1-7, 1-8, 1-9, 1-44, 1-45

6V-7935 Black Plastic Handle Screwdriver, 1/4" 1-2, 1-3, 1-4, 1-5, 1-8, 1-45

6V-7936 Black Plastic Handle No. 1 Phillips Screwdriver 1-2, 1-3, 1-8,

1-44, 1-456V-7937 Black Plastic Handle Screwdriver,

3/16" 1-2, 1-3, 1-8, 1-44, 1-456V-7938 Black Plastic Handle Screwdriver,

1/4" 1-2, 1-456V-7939 Wire Marker Tape Dispenser 22--77666V-7981 Hex Head Bolt, M10 x 1.5,

70 mm, bulk 2-1296V-8149 Hex Nut, M12 x 1.75, bulk 2-1296V-8197 Hex Head Bolt, M12 x 1.75,

40 mm, bulk 2-1296V-8214 Hex Head Bolt, M6 x 1,

20 mm, bulk 2-1296V-8225 Hex Nut, M6 x 1, bulk 2-1296V-8490 Hex Head Bolt, M6 x 1,

25 mm, bulk 2-1296V-8675 Hex Head Bolt, M12 x 1.75,

35 mm, bulk 2-1296V-8837 Hex Head Bolt, M6 x 1,

16 mm, bulk 2-1296V-9074 Special Length Heli-Coil

Screw Thread Insert 2-406V-9076 Special Length Heli-Coil

Screw Thread Insert 2-406V-9081 Installation Tool (Heli-Coil)

Screw Thread Insert 2-386V-9082 Installation Tool (Heli-Coil)

Screw Thread Insert 2-38, 2-406V-9083 Installation Tool (Heli-Coil)

Screw Thread Insert 2-37, 2-38, 2-406V-9085 Socket Assy, 10 mm Hex Size,

1/2" Drive 1-316V-9086 Socket Assy, 14 mm Hex Size,

1/2" Drive 1-316V-9090 Wrench, Combination, 10 mm 1-7, 1-356V-9091 Combination Wrench, 11 mm 1-356V-9092 Combination Wrench, 12 mm 1-356V-9093 Combination Wrench,

13 mm 1-5, 1-7, 1-356V-9094 Combination Wrench, 14 mm 1-356V-9095 Combination Wrench, 15 mm 1-356V-9096 Combination Wrench,

16 mm 1-5, 1-6, 1-9, 1-356V-9097 Combination Wrench, 17 mm 1-7, 1-356V-9098 Combination Wrench,

18 mm 1-6, 1-9, 1-356V-9099 Combination Wrench,

19 mm 1-6, 1-7, 1-9, 1-356V-9100 Combination Wrench,

20 mm 1-356V-9101 Combination Wrench,



24 mm 1-6, 1-9, 1-356V-9104 Combination Wrench,

30 mm 1-6, 1-8, 1-9, 1-356V-9110 Std. Length Socket, 15 mm,

12 Pt., 1/2" Drive 1-29, 1-336V-9111 Std. Length Socket, 16 mm,

12 Pt., 1/2" Drive 1-6, 1-9, 1-29, 1-33

6V-9112 Std. Length Socket, 17 mm, 12 Pt., 1/2" Drive 1-6, 1-7, 1-29, 1-33

6V-9113 Std. Length Socket, 18 mm, 12 Pt., 1/2" Drive 1-6, 1-9, 1-29, 1-33

6V-9114 Std. Length Socket, 19 mm, 12 Pt., 1/2" Drive 1-7, 1-29, 1-33

6V-9115 Std. Length Socket, 21 mm, 12 Pt., 1/2" Drive 1-29, 1-33

6V-9116 Std. Length Socket, 22 mm, 12 Pt., 1/2" Drive 1-6, 1-7, 1-9, 1-29, 1-33

6V-9117 Std. Length Socket, 24 mm, 6 Pt. 3/4" Drive 1-33

6V-9118 Std. Length Socket, 30 mm, 6 Pt. 3/4" Drive 1-7, 1-33



6V-9124 Inj. Nozzle Clean. TG Screwdriver 1-8, 1-45

6V-9135 Pin 1-606V-9136 Gear 1-606V-9137 Dowl 1-606V-9449 Smoke Meter Group Case 1-856V-9451 Tubular Arm 1-596V-9452 Adapter, 3/4" Drive 1-596V-9453 Torque Wrench, 2 3/16" 1-596V-9454 Torque Wrench, 1 7/8" 1-596V-9455 Torque Wrench, 1 7/8" 1-596V-9456 Torque Wrench, 1 11/16" 1-596V-9507 Plug (9/16 EXT ORFS) 2-496V-9508 Plug (11/16 EXT ORFS) 2-496V-9509 Plug (13/16 EXT ORFS) 2-496V-9510 Plug (1 EXT ORFS) 2-496V-9511 Plug (12D3/16 EXT ORFS) 2-496V-9512 Plug (12D7/16 EXT ORFS) 2-496V-9513 Plugs, ORFS, 1 11/16-12 2-497B-2742 Hex Head Bolt,

1/4-20 x 1 1/4 in, bulk 2-1287B-9665 Pipe-Square Drive Plugs,

1 1/2-11 1/2 2-507E-8716 Tapered Dual-Function Cap/Plug 2-517F-9504 Pipe-Square Drive Plugs, 1/4-18 2-507H-3171 Pipe-Allen Drive Plugs, 1/4-18 2-507J-0204 O-ring Seal 2-497J-8611 Adapter 2-1137K-1181 Cable Strap,

355.6 mm x 7.9 mm, bulk 2-124, 2-1297L-2505 Pipe-Square Head Plugs, 1-11 1/2 2-497M-3542 Clutch Assembly 3-287M-7410 Pipe Plug 2-507M-7456 Bearing Mount 3-1, 3-37M-7809 Socket Wrench,

Special Large, 3/4" Drive 1-437M-8485 Flow Meter Hyd. Sys. Test Seal 2-497M-8489 Adapter 2-1137N-0296 Ether Cylinder, 18 oz-3" diameter 3-347S-7093 Special Thread Tap 2-357S-8739 HeliCoil Insert Inst.

Group Tap Guide 2-407S-8740 HeliCoil Insert Install. Drill Guide 2-407X-1062 Ether Cylinder, 21 oz-4" diameter 3-347X-2425 Natural Gas Engine Oil,

Low Ash, EL250, 30 3-167X-2426 Natural Gas Engine Oil,

Low Ash, EL250, 40 3-167X-2887 Diesel Engine Oil, 30 3-147X-2888 Transmission/Drive Train Oil, 30 3-177X-2982 YL on BL Diesel Power Mudflaps 2-1127X-2983 BL on WH Diesel Power Mudflaps 2-1127X-2984 Mudflap, 24" x 36" 2-1127X-2986 Mudflap, 24" x 36" 2-1127X-3387 Oil Sampling Valve 2-112, 2-113, 2-1147X-7611 Transmission/Drive Train Oil, 30 3-177X-7612 Transmission/Drive Train Oil, 50 3-177X-7613 Hydraulic Oil, 10W 3-197X-7614 Gear Oil, 85W-140 3-19


Part Number Index


7X-7615 Gear Oil, 85W-140 3-197X-7616 Gear Oil, 85W-140 3-197X-7617 Gear Oil, 85W-140 3-197X-7618 Gear Oil, 85W-140 3-197X-7664 Multipurpose Grease,

plastic pail, 16 kg 3-217X-7665 Multipurpose Grease, drum, 181 kg 3-217X-7699 Advanced 3Moly Grease,

Grade 2, plastic pail, 16 kg 3-217X-7701 Advanced 3Moly Grease,

Grade 2, drum, 181 kg 3-217X-7839 Diesel Engine Oil, 30 3-147X-7840 Diesel Engine Oil, 30 3-147X-7842 Diesel Engine Oil, 40 3-147X-7843 Diesel Engine Oil, 40 3-147X-7851 Transmission/Drive Train Oil, 10W 3-177X-7852 Transmission/Drive Train Oil, 10W 3-177X-7854 Transmission/Drive Train Oil, 30 3-177X-7855 Transmission/Drive Train Oil, 30 3-177X-7857 Transmission/Drive Train Oil, 50 3-177X-7858 Transmission/Drive Train Oil, 50 3-177X-7860 Hydraulic Oil, 10W 3-197X-7861 Hydraulic Oil, 10W 3-197X-7867 Gear Oil, 80W-90 3-197X-7887 Gear Oil, 80W-90 3-198B-2377 Hex Head Bolt, 1/4-20 x 2 in, bulk 2-1288C-3345 Oil Sampling Valve 2-112, 2-113, 2-1148C-3400 Gear Oil, Synthetic, 75W-140 3-208C-3445 Dust Cap (Engine) 2-112, 2-113, 2-1148C-3446 Oil Sampling Valve 2-112, 2-113, 2-1148C-3447 Dust Cap

(Transmission) 2-112, 2-113, 2-1148C-3451 Dust Cap (Hydraulic) 2-112, 2-113, 2-1148C-3680 Coolant Additive 3-128C-3684 Antifreeze/Coolant 3-128C-3686 Antifreeze/Coolant 3-128C-3688 Gear Oil, Synthetic, 75W-90 3-208C-3698 Diesel Engine Oil, 30 3-148C-3699 Diesel Engine Oil, 30 3-148C-3700 Diesel Engine Oil, 30 3-148C-3702 Diesel Engine Oil, 30 3-148C-3703 Diesel Engine Oil, 40 3-148C-3704 Diesel Engine Oil, 40 3-148C-3705 Diesel Engine Oil, 40 3-148C-3706 Diesel Engine Oil, 40 3-148C-3707 Diesel Engine Oil, 40 3-148C-3747 Gear Oil, Synthetic, 75W-90 3-208C-4424 Metric Plugs, M22 x 1.5 2-508C-6427 Adapter 2-1138C-7398 Gear Oil, 80W-90 3-198C-8456 Sealed Cap 2-112, 2-113, 2-1148C-9927 Gear Oil, 80W-90 3-198F-2239 Special Open End Wrench,

2 9/32" 1-39, 1-418F-2240 Handle 1-398F-2241 Moveable Jaw 1-398F-2242 Bolt 1-398F-2243 H-D Adjustable End Wrench 1-398F-2245 Moveable Jaw 1-398F-2246 Bolt 1-398F-4675 Torque Wrench 1-598F-4677 Extension, 3/4" Dr,

26 7/8" Center-Center 1-598F-4678 Driver Adapter, 3/4 Drive 1-598F-5564 HeliCoil Insert Inst. Group

Tap Guide 2-408F-5565 HeliCoil Insert Inst. Group

Tap Guide 2-408F-5566 HeliCoil Insert Inst. Group

Tap Guide 2-408F-5567 HeliCoil Insert Group Drill Guide 2-408F-5568 HeliCoil Insert Group Drill Guide 2-408F-5569 HeliCoil Insert Group Drill Guide 2-408F-5573 HeliCoil Insert 2-408F-5574 HeliCoil Insert Inst. Group Insert 2-408F-5575 HeliCoil Insert Inst. Group Insert 2-408F-5576 HeliCoil Insert Inst. Group Tap 2-40

8F-5577 HeliCoil Insert Inst. Group Tap 2-408F-5578 HeliCoil Insert Inst. Group Tap 2-408F-9866 Grease Gun 1-4, 1-5, 1-6, 1-7,

1-8, 1-9, 11--55668H-0707 Bolt 1-608H-8423 Combination Wrench,

1 5/8" 1-1, 1-8, 1-248H-8424 Combination Wrench,

1 1/2" 1-1, 1-6, 1-248H-8501 Tappet Wrench 1-1, 1-3, 1-248H-8502 Box End Combination Wrench,

6 Pt., 1/4" 1-248H-8504 Socket, 3/4", 2 1/4" Drive 1-1, 1-14, 1-188H-8516 Combination Wrench,

1 1/16" 1-1, 1-8, 1-248H-8517 Combination Wrench, 1 1/8" 1-1, 1-248H-8518 Combination Wrench, 1 1/4" 1-1, 1-248H-8519 Combination Wrench, 1 5/16" 1-1, 1-248H-8520 Combination Wrench,

1 3/8", (Short) 1-1, 1-8, 1-248H-8529 Socket, 3/4", 3/4" Drive 1-1, 1-14, 1-188H-8530 Socket, 3/4", 7/8" Drive 1-1, 1-14, 1-188H-8531 Socket, 3/4", 15/16" Drive 1-1, 1-14, 1-188H-8532 Socket, 3/4", 1" Drive 1-1, 1-14, 1-188H-8533 Socket, 3/4", 1 1/16" Drive 1-1, 1-14, 1-188H-8534 Socket, 3/4", 1 1/8" Drive 1-1, 1-14, 1-188H-8535 Socket, 3/4", 1 1/4" Drive 1-1, 1-14, 1-188H-8536 Socket, 3/4",

1 5/16" Drive 1-1, 1-4, 1-5, 1-14, 1-188H-8537 Socket, 3/4",

1 1/2" Drive 1-1, 1-4, 1-5, 1-14, 1-188H-8538 Socket, 3/4",

1 11/16" Drive 1-1, 1-4, 1-14, 1-188H-8539 Socket, 3/4",

1 5/8" Drive 1-1, 1-5, 1-14, 1-188H-8540 Socket, 3/4",

1 3./4" Drive 1-1, 1-14, 1-188H-8541 Socket, 3/4",

1 7/8" Drive 1-1, 1-4, 1-14, 1-188H-8542 Socket, 3/4", 2" Drive 1-1, 1-14, 1-188H-8543 Socket, 3/4", 2 1/8" Drive 1-1, 1-14, 1-188H-8544 Socket, 3/4", 2 3/16" Drive 1-1, 1-14, 1-188H-8545 Ratchet Wrench,

3/4" Sq. Drive 1-14, 1-218H-8546 Breaker Bar, 3/4",

3/4" Drive 1-1, 1-7, 1-14, 11--22118H-8548 Marine Gear

Socket Extension 1-1, 1-7, 1-14, 1-218H-8549 Double Hex Socket, 9/16", 1/2" Drive 1-1,

1-3, 1-4, 1-5, 1-7, 1-12, 1-188H-8550 Double Hex Socket, 5/8", 1/2" Drive 1-1,

1-3, 1-12, 1-188H-8551 Double Hex Socket, 11/16", 1/2" Drive 1-1,

1-3, 1-4, 1-12, 1-188H-8552 Double Hex Socket, 3/4", 1/2" Drive 1-1,

1-3, 1-4, 1-5, 1-12, 1-188H-8553 Double Hex Socket, 13/16", 1/2" Drive 1-1,

1-3, 1-4, 1-12, 1-188H-8554 Double Hex Socket, 7/8", 1/2" Drive 1-1,

1-3, 1-4, 1-5, 1-12, 1-188H-8555 Double Hex Socket, 15/16", 1/2" Drive 1-1,

1-3, 1-4, 1-12, 1-188H-8556 Double Hex Socket 1", 1/2" Drive 1-1,

1-3, 1-4, 1-5, 1-7, 1-12, 1-188H-8557 Ratchet Wrench, 1/2" Sq. Drive 1-208H-8559 Socket Extension, 1/2", 10" Long 1-1, 1-3,

1-4, 1-5, 1-7, 1-8, 1-12, 1-21, 1-548H-8560 Universal Joint, 1/2" 1-1, 1-228H-8561 Fuel Inj. Pumps

and Valves Adapter 1-1, 1-5, 1-22, 1-548H-8562 Universal Socket,

7/16", 3/8" Drive 1-1, 1-2, 1-13, 1-178H-8563 Universal Socket,

1/2", 3/8" Drive 1-1, 1-2, 1-13, 1-178H-8564 Universal Socket,

9/16", 3/8" Drive 1-1, 1-2, 1-13, 1-17

8H-8565 Universal Socket, 5/8", 3/8" Drive 1-1, 1-2, 1-13, 1-17

8H-8566 Universal Socket, 3/4", 3/8" Drive 1-1, 1-2, 1-13, 1-17

8H-8567 Double Hex Socket, 7/16 in, 3/8 in Drive 1-1, 1-2, 1-10, 1-17


8H-8569 Socket, Double Hex, 9/16 in, 3/8 in Drive 1-1, 1-2, 1-10, 1-17



8H-8572 Breaker Bar, 1/2" 1-208H-8573 Speeder Handle,

3/8", 3/8" Drive 1-1, 1-2, 1-10, 11--22228H-8574 Socket Extension, 3" Long,

3/8" Drive Tool 1-1, 1-2, 1-10, 1-218H-8575 Socket Extension, 6" Long,

3/8" Drive 1-1, 1-2, 1-10, 1-218H-8576 Adapter, 3/8" Female to

1/2" Male, 3/8" Drive 1-1, 1-2, 1-228H-8577 Ball Peen Hammer,

1 1/4" 1-2, 1-6, 1-9, 1-468H-8578 Punch, 3.8" Point,

9 1/2" Long 1-2, 1-3, 1-538H-8579 Punch, 5.32" Point,

28" Long 1-2, 1-3, 1-538H-8580 Straight Blade Scraper,

1 1/2" Wide 1-2, 1-3, 1-548H-8581 Feeler Gauge, 25 Blade 1-2, 1-3, 1-4,

1-5, 1-6, 1-7, 1-9, 1-538H-8582 Vise Grip Wrench, 10" 1-2, 1-3, 1-518L-8413 Cable Tie 2-1248M-0456 Fuse (20 Amp), bulk 2-1298M-0553 Silicone Fluid 3-288M-4665 Fan Drive Clutch 3-288M-8289 HeliCoil Insert Inst. Group Tap 2-408M-8290 HeliCoil Insert Inst. Group Tap 2-408M-8291 HeliCoil Insert Inst. Group

Insert Nib 2-408M-8292 HeliCoil Insert Inst. Group Insert 2-408M-8948 Fuse (15 Amp), bulk 2-1298S-1346 Collet, 5/8" -11 2-478S-1347 Housing 2-478S-1364 Box 2-478S-1365 Collet, 1/4" -20 2-478S-1366 Collet, 1/4" -28 2-478S-1367 Collet, 5/16" -18 2-478S-1368 Collet, 5/16" -24 2-478S-1369 Collet, 3/8" -16 2-478S-1370 Collet, 3/8" -24 2-478S-1371 Collet, 7/16" -14 2-478S-1372 Collet, 7/16" -20 2-478S-1373 Collet, 1/2" -13 2-478S-1374 Collet, 1/2" -20 2-478S-1375 Collet, 9/16" -12 2-478S-1376 Collet, 9/16" -18 2-478S-1377 Collet, 5/8" -18 2-478S-1378 Stud and Resetter

Tool Set Remover 22--44778S-1589 Socket, 1/4" 1-2, 1-15, 1-178S-1590 Socket, 5/16" 1-2, 1-15, 1-178S-1591 Socket, 3/8" 1-2, 1-15, 1-178S-1592 Socket, 7/16" 1-2, 1-15, 1-178S-1593 Socket, 1/2" 1-2, 1-15, 1-188S-1594 Socket, 9/16" 1-2, 1-15, 1-188S-1595 Socket, 5/8" 1-2, 1-15, 1-188S-1596 Socket, 11/16" 1-2, 1-15, 1-188S-1597 Socket, 3/4" 1-2, 1-15, 1-188S-1598 Socket, 13/16" 1-2, 1-15, 1-188S-1599 Socket, 7/8" 1-2, 1-15, 1-188S-1600 Socket, 15/16" 1-2, 1-15, 1-188S-1601 Socket, 1" 1-2, 1-15, 1-188S-1602 Metal Storage w/

Hinged Lid Box 1-2, 1-15, 1-83



Part Number Index

8S-1603 Socket Set, 15 Piece, 12 Pt. Shoulder Bolt 11--1155

8S-2257 Eye Loupe, 12X power 22--1111008S-2274 Double Hex Socket,

3/8", 3/8" Drive 1-1, 1-2, 1-10, 1-178S-2284 Universal Socket,

3/8", 3/8" Drive 1-1, 1-2, 1-13, 1-178S-2357 Deep Well Socket,

1100 Series Eng. 1-11, 1-178S-5128 Foam Block for Plastic

Storage Case, Charcoal 1-858S-5131 Adapter, 1/2" Drive,

7/8" 12 Point Box End 1-598S-6026 HeliCoil Insert Install. Drill Guide 2-408S-6027 HeliCoil Insert Install. Tap Guide 2-408S-6028 HeliCoil Insert Install. Drill Guide 2-408S-6029 HeliCoil Insert Install. Tap Guide 2-408S-6030 HeliCoil Insert Install. Drill Guide 2-408S-6031 HeliCoil Insert Install. Tap Guide 2-408S-6032 HeliCoil Insert Inst. Group Nib 2-408S-6033 HeliCoil Insert Inst. Group

Pre-Winder 2-408S-6034 HeliCoil Insert Inst. Group Sleeve 2-408S-6400 HeliCoil Insert Inst. Group Insert 2-408S-6402 HeliCoil Insert Inst. Group Insert 2-408S-9092 Hex Head Bolt,

5/8-11 x 2 1/4 in, bulk 2-1298T-0065 RTV Adhesive/Sealant,

White, 3 fl oz 3-78T-0100 Hex Head Bolt,

M8 x 1.25, 60 mm, bulk 2-1298T-0275 Hex Head Bolt, M6 x 1,

50 mm, bulk 2-1298T-0276 Hex Head Bolt,

M8 x 1.25, 45 mm, bulk 2-1298T-0293 Hex Head Bolt,

M12 x 1.75, 20 mm, bulk 2-1298T-0460 Serviceman's Tool Group 11--11, 1-28T-0461 Serviceman's Tool Group 1-1, 11--22, 1-38T-0639 Hex Head Bolt, M6 x 1,

12 mm, bulk 2-1298T-0640 Hex Head Bolt, M6 x 1,

30 mm, bulk 2-1298T-0832 Unstake Lock Nut Chisel 1-538T-0833 Offset Wrench, box, end,

chrome, 9/16 inch 1-368T-0841 Pressure Gauge Group Case 1-858T-0855 Transmission Test Group Gauge 1-88T-0856 Dual Scale Pressure Gauge 1-88T-0859 Press. Differ. Gauge Group

Pressure Gauge 1-88T-0861 Pressure Dif. Gauge, Trans.

Test Group 1-88T-0893 Screw 1-608T-0894 Hardware Kit 1-608T-1589 Coolant Additive 3-128T-2692 Screw Thread Insert

Installation Tool (Heli-Coil) 2-37, 2-388T-2695 Screw Thread Insert





Installation Tool (Heli-Coil) 2-388T-2712 Screw Thread Insert




Installation Tool (Heli-Coil) 2-38

8T-2724 Screw Thread Insert Installation Tool (Heli-Coil) 2-38

8T-2727 Screw Thread Insert Installation Tool (Heli-Coil) 2-37, 2-38












8T-2763 Screw Thread Insert Metric Fine Installation Tool 2-39







8T-2790 Installation Tool Screw Thread Insert, (Heli-Coil) 2-38, 2-39, 2-40

8T-2793 Installation Tool Screw Thread Insert, (Heli-Coil) 2-38, 2-39

8T-2796 Insert, Screw Thread, Installation Tool (Heli-Coil) 2-39

8T-2799 Installation Tool Screw Thread Insert, (Heli-Coil) 2-39, 2-40

8T-2801 Tap Screw Thread Insert, (Heli-Coil) 2-39


8T-2854 Nozzle Retainer Handler 11--22118T-2998 Camshaft and Follower Lubricant 3-278T-3041 Std. Length Socket,

14 mm, 12 Pt., 1/2" Drive 1-29, 1-338T-3042 Hex Size Socket Assy, 7/32" 1-158T-3043 Hex Bit, 7/32" Hex Size 1-158T-3052 Degree Wheel 11--66008T-3054 Clean ‘N Strip Disc, Extra Coarse 2-98T-3055 Track Roller/Idler Cleaning Mandrel 2-98T-3062 Rethreading Fractional Die,

Hexagon 2-338T-3063 Rethreading Fracitonal Die,

Hexagon 2-338T-3064 Rethreading Metric Die, Hexagon 2-338T-3065 Rethreading Fractional Die,

Hexagon 2-338T-3066 Rethreading Metric Die, Hexagon 2-338T-3067 Rethreading Fractional Die,

Hexagon 2-338T-3068 Rethreading Fractional Die,


Hexagon 2-338T-3070 Rethreading Metric Die, Hexagon 2-33

8T-3071 Rethreading Fractional Die, Hexagon 2-33



8T-3074 Rethreading Metric Die, Hexagon 2-338T-3075 Rethreading Fractional Die,



Hexagon 2-338T-3078 Rethreading Metric Die, Hexagon 2-338T-3079 Metric Size Tap, Plug 2-358T-3080 Metric Size Tap, Plug 2-358T-3081 Metric Size Tap, Plug 2-358T-3082 Metric Size Tap, Plug 2-358T-3083 Metric Size Tap, Plug 2-358T-3084 Metric Size Tap, Plug 2-358T-3085 Metric Size Tap, Plug 2-358T-3086 Metric Size Tap, Plug 2-35, 2-428T-3087 Metric Size Tap, Plug 2-358T-3088 Metric Size Tap, Plug 2-358T-3089 Metric Size Tap, Plug 2-35, 2-428T-3090 Metric Size Tap, Plug 2-358T-3091 Metric Size Tap, Plug 2-358T-3092 Metric Size Tap, Plug 2-358T-3093 Metric Size Tap, Plug 2-35, 2-428T-3094 Metric Size Tap, Plug 2-358T-3095 Metric Size Tap, Plug 2-35, 2-428T-3096 Metric Size Tap, Plug 2-358T-3120 Wrench Set, 11 Piece,

Straight Handle 11--33888T-3121 Screw Thread Insert

Installation Tool (Heli-Coil) 2-38, 2-398T-3122 Straight Handle Wrench Assy 1-388T-3123 Straight Handle Wrench Assy 1-388T-3124 Straight Handle Wrench Assy 1-388T-3125 Straight Handle Wrench Assy 1-388T-3126 Straight Handle Wrench Assy 1-388T-3127 Straight Handle Wrench Assy 1-388T-3128 Straight Handle Wrench Assy 1-388T-3129 Straight Handle Wrench Assy 1-388T-3130 Straight Handle Wrench Assy 1-388T-3131 Straight Handle Wrench Assy 1-388T-3132 Straight Handle Wrench Assy 1-388T-3133 Straight Handle Wrench Assy 1-388T-3134 Straight Handle Wrench Assy 1-388T-3135 Straight Handle Wrench Assy 1-388T-3136 Straight Handle Wrench Assy 1-388T-3137 Straight Handle Wrench Assy 1-388T-3138 Straight Handle Wrench Assy 1-388T-3153 Engine Pressure G. Foam Block 1-858T-3172 Wrench Assy,

1/2" Sq. Drive Handle 1-388T-3173 Wrench Assy,










1/2" Sq. Drive Handle 1-388T-3196 Offset Box Wrench 1-39, 1-59


Part Number Index


8T-3227 Wrench Set, 6 Piece, Straight Handle 11--3388

8T-3228 Wrench Set, 11 Piece, 1/2" Sq. Drive Handle 11--3388

8T-5035 Hex Head Bolt, M10 x 1.5, 65 mm, bulk 2-129

8T-5181 Input End Assembly 1-608T-5182 Wheel Mounting Impact Socket,

1-1/2" 1-18, 1-628T-5183 Wheel and Tire Extension,

3/4" Drive 1-8, 1-21, 1-628T-5190 Air Regulated Torque

Wrench Group 1-618T-5191 Air Regulated Torque

Wrench Group Bar 1-618T-5192 Air Regulated Torque

Wrench Group Bar 1-618T-5193 Air Regulated Torque

Wrench Group Regulator 1-618T-5194 Air Regulated Torque

Wrench Group Block 1-618T-5209 Marker Tape Replacement Rolls 2-768T-5211 Marker Tape Replacement Rolls 2-768T-5212 Marker Tape Replacement Rolls 2-768T-5213 Marker Tape Replacement Rolls 2-768T-5214 Marker Tape Replacement Rolls 2-768T-5215 Marker Tape Replacement Rolls 2-768T-5216 Marker Tape Replacement Rolls 2-768T-5217 Marker Tape Replacement Rolls 2-768T-5218 Marker Tape Replacement Rolls 2-768T-5219 Marker Tape Replacement Rolls 2-768T-5224 Air Regulated Torque

Wrench Group Gauge 1-618T-5225 Air Regulated Torque

Wrench Group Hose 1-618T-5226 Air Regulated Torque

Wrench Group Nipple 1-618T-5227 Air Regulated Torque

Wrench Coupler 1-618T-5228 Air Regulated Torque

Wrench Group Block 1-618T-5230 Air Regulated Torque

Wrench Group 1-34, 11--6611, 1-628T-5321 Seal Kit 1-618T-7696 Rod, 6.35 mm x 55.24 cm

(1/4 in x 21 3/4 inch) 2-488T-7697 Rod, 9.52 x 914.4 mm

(3/8 x 36 in) 2-488T-7698 Rod, 4.76 mm x 45.72 cm

(3/8 x 18 in) 2-488T-7699 Igniter 2-488T-7748 Light Deburring Wheel, 8" x 1" 2-168T-7749 SST Deburring Wheel, 8" x 1" 2-178T-7751 Hand Pad, Heavy-Duty 2-228T-7752 Hand Pad, Long Life, coarse 2-228T-7765 Hand Pad, General Purpose 2-228T-7766 Mandrel Adapter #935 22--22228T-7767 Level Cut Unitized Wheel, 1" x 1" 2-178T-7768 Mandrel Adapter #936 2-16, 2-178T-7769 Wheel, Clean ‘N Strip Unitized,

1 1/2" x 1" 2-168T-7792 Mini Cutting Torch 22--44888T-7793 Striker Plate 2-488T-7794 Collet, 6.35 mm (1/4 in) 2-488T-7795 Collet, 4.76 mm (3/8 in) 2-488T-7876 O-ring Seal 2-112, 2-113, 2-1148T-9013 RTV Adhesive/Sealant, Red 3-78T-9014 RTV Silicone Adhesive/

Sealant, Clear 3-78T-9018 Radiator Repair 33--33448T-9019 Fuel Tank Repair 33--33448T-9022 RTV Silicone Adhesive/Sealant,

Blue 3-78T-9110 Washer 2-488T-9174 Track Bolt Socket, 2-1/16" 1-198T-9175 Track Bolt Socket, 2" 1-19

8T-9201 Rod, 4.76 mm x 55.24 cm (3/16 x 21 3/4 in) 2-48

8T-9202 Collet, 4.76 mm (3/16 in) 2-488T-9208 Probe Assembly 2-112, 2-113, 2-1148T-9265 Socket Extension, 3/4" 1-21, 1-628T-9287 Washer 2-488T-9293 Torque Wrench, 1/2" Drive Size 1-588T-9548 Diesel Engine Oil, 15W-40 3-148T-9568 Transmission/Drive Train Oil, 10W 1-62,

3-178T-9569 Transmission/Drive Train Oil, 10W 3-178T-9572 Transmission/Drive Train Oil, 30 3-178T-9573 Transmission/Drive Train Oil, 30 3-178T-9576 Transmission/Drive Train Oil, 50 3-178T-9577 Transmission/Drive Train Oil, 50 3-178T-9580 Hydraulic Oil, 10W 3-198T-9581 Hydraulic Oil, 10W 3-198T-9582 Gear Oil, 80W-90 3-198T-9583 Gear Oil, 80W-90 3-198T-9584 Gear Oil, 80W-90 3-199A-1593 Surface Texture Replica 22--44889B-1496 Special Open End Wrench, 1 5/8" 1-419F-2247 Probe Adapter Group Plug 2-509F-2636 Nozzle Assy 1-569F-2637 Nipple 1-569F-2638 Hose Assy 1-569F-2689 Nozzle Assembly 1-569F-3869 Special Open End Wrench, 2 3/4" 1-419F-7022 Hex Head Bolt,

1/4-20 x 1 1/2 in, bulk 2-1289F-7143 HeliCoil Insert Inst. Group

Sleeve Assy 2-409F-7145 HeliCoil Insert Inst. Group Nib 2-409F-7146 HeliCoil Insert Inst. Group

Pre-Winder 2-409F-7147 HeliCoil Insert Inst. Group Nib 2-409F-7148 HeliCoil Insert Inst. Group

Pre-Winder 2-409F-7149 HeliCoil Insert Inst. Group Nib 2-409F-7150 HeliCoil Insert Inst. Group

Pre-Winder 2-409F-9396 Special Thread Tap 2-359F-9397 Special Rethreading Die 2-349F-9398 Hexagon Rethreading

Fractional Die 2-33, 2-349F-9963 Socket Wrench,

Special Large, Bar Turn 1-439M-1512 HeliCoil Insert Install. Drill Guide 2-409M-1513 HeliCoil Insert Install. Tap Guide 2-409M-1974 Hard Washer, 5/16 in, bulk 2-1299M-5165 Silicone Fluid 3-289M-6591 HeliCoil Insert Install. Tap Guide 2-409M-6592 HeliCoil Insert Install. Drill Guide 2-409M-6593 HeliCoil Insert Inst. Group Insert 2-409M-6594 HeliCoil Insert Inst. Group

Pre-Winder 2-409M-6595 HeliCoil Insert Inst. Group Tap 2-409M-6596 HeliCoil Insert Inst. Group Insert 2-409M-8437 Clutch Assembly 3-289S-1366 Hex Head Bolt,

1/2-13 x 2 1/2 in, bulk 2-1299S-1711 Socket, 3/16", 1/4" Drive 1-2, 1-9, 1-179S-1712 Socket, 7/32", 1/4" Drive 1-2, 1-9, 1-179S-1713 Socket, 1/4", 1/4" Drive 1-2, 1-9, 1-179S-1714 Socket, 9/32", 1/4" Drive 1-2, 1-9, 1-179S-1715 Nozzle Puller Group

Socket 1-2, 1-9, 1-179S-1716 Socket, 11/32", 1/4" Drive 1-2, 1-9, 1-179S-1717 Socket, 3/8", 1/4" Drive 1-2, 1-9, 1-179S-1718 Socket, 7/16", 1/4" Drive 1-2, 1-9, 1-179S-1719 Socket, 1/2", 1/4" Drive 1-2, 1-9, 1-179S-1720 Socket Extension, 2" 1-2, 1-9, 1-21, 1-349S-1721 Nozzle Puller Group

Extension 1-2, 1-9, 1-21, 1-349S-1722 Socket Driver, 1/4", 1/4" Drive 1-2, 1-99S-1724 Universal Joint 1-2, 1-9, 1-22, 1-34

9S-1725 Metal Storage w/ Hinged Lid Box 1-2, 1-9, 1-83

9S-1727 Universal Socket, 11/16", 3/8" Drive 1-2, 1-13, 1-17

9S-1728 Socket, 11/16", 3/8" Drive 1-2, 1-10, 1-179S-1729 Socket, 1 1/16", 1/2" Drive 1-3, 1-12, 1-189S-1730 Socket,

1 1/8", 1/2" Drive 1-3, 1-4, 1-5, 1-12, 1-189S-1731 Socket,

1 1/4", 1/2" Drive 1-3, 1-4, 1-12, 1-189S-1732 Socket Extension, 5" 1-3, 1-4, 1-6, 1-9,

1-12, 1-219S-1742 Hex Bit Set, 9 Piece 1-3, 11--44229S-1743 Fuel Injection R&I

Ferrule Nut Wrench 1-3, 1-419S-1746 Socket Set, 11 Piece, 3/8" Drive 11--11009S-1747 Universal Drive Socket Set,

7 Piece, 3/8" Drive 11--11339S-1748 Socket Set, 16 Piece, 1/2" Drive 11--11229S-1749 Socket Set, 21 Piece, 3/4" Drive 11--11449S-1750 Chest, 3 Drawer 11--8822, 1-839S-2573 Glow Plug Socket 1-2, 1-179S-3263 Thread Lock 3-1, 3-39S-3500 Screw Thread Master

Kit Insert 2-41, 2-429S-3509 Screw Thread Insert Repair Kit 2-429S-3510 Screw Thread Insert Repair Kit 2-429S-3515 Screw Thread Insert Repair Kit 2-429S-3618 Screw Thread Insert Repair Kit 2-429S-3619 Screw Thread Insert Repair Kit 2-429S-3620 Screw Thread Insert Repair Kit 2-429S-3621 Screw Thread Insert Repair Kit 2-429S-3622 Screw Thread Insert Repair Kit 2-429S-3623 Screw Thread Insert Repair Kit 2-429S-3624 Screw Thread Insert Repair Kit 2-429S-3625 Screw Thread Insert Repair Kit 2-429S-3626 Screw Thread Insert Repair Kit 2-429S-3627 Screw Thread Insert Repair Kit 2-429S-3628 Screw Thread Insert Repair Kit 2-429S-3629 Screw Thread Insert Repair Kit 2-429S-3630 Screw Thread Insert Repair Kit 2-429S-3631 Screw Thread Insert Repair Kit 2-429S-3632 Screw Thread Insert Repair Kit 2-429S-3633 Screw Thread Insert Repair Kit 2-429S-3634 Screw Thread Insert Repair Kit 2-429S-3635 Screw Thread Insert Repair Kit 2-429S-3636 Screw Thread Insert Repair Kit 2-429S-3637 Screw Thread Insert Repair Kit 2-429S-3638 Screw Thread Insert Repair Kit 2-429S-3641 Screw Thread Insert

Replacement Kit 2-429S-3642 Screw Thread Insert



Replacement Kit 2-429S-3645 Insert Screw Thread










Replacement Kit 2-42



Part Number Index

9S-3657 Screw Thread Insert Replacement Kit 2-42










9S-3700 Screw Thread Insert Master Kit 2-41, 2-42

9S-4026 Adapter, 1 1/2" to 1" Drive 1-229S-4027 Extension, 1" Drive Both Ends 1-229S-4028 Extension, 1" Drive Both Ends 1-229S-4180 Cab Tilt Cyl. Ar. Plug 2-499S-4181 Straight Thread O-ring, 1 5/16-12 2-499S-4182 Plug 2-499S-4183 Plug 2-499S-4185 Straight Thread O-ring, 3/4-16 2-499S-4188 Plug 2-499S-4190 Straight Thread O-ring, 7/8-14 2-499S-4191 Straight Thread O-ring, 9/16-18 2-499S-5031 Deep Well Socket,

1100, 3300, 3208 Eng. 1-11, 1-179S-5518 JIC 37-Degree Plug 2-499S-6130 Straight Thread O-ring, 7/8-14 2-499S-6330 Adapter, 1/2" Drive,

9/16" 12 Point Box End 1-599S-6332 A/C Storage Box 1-839S-6369 Track Bolt Socket, 1-1/8" 1-199S-6370 Track Bolt Socket, 15/16" 1-199S-6371 Track Bolt Socket, 1-1/2" 1-199S-6372 Track Bolt Socket, 1-5/16" 1-199S-6373 Track Bolt Socket, 1-1/8" 1-199S-6374 Track Bolt Socket, 15/16" 1-199S-6375 Track Bolt Socket, 7/8" 1-199S-7351 Torque Wrench, 3/4 in Drive 1-23, 1-589S-7352 Dial Type Torque Wrench,

3/4 in 1-58, 1-599S-7353 Dial Type Torque Wrench,

1/2 in 1-58, 1-599S-7354 Dial Type Torque Wrench, 3/8 in 1-589S-7583 Straight Thread O-ring, 2 1/2-12 2-499S-8001 Straight Thread O-ring, 5/16-24 2-499S-8002 Allen Drive Plugs O-ring, 7/16-20 2-499S-8003 Allen Drive Plugs O-ring, 1/2-20 2-499S-8004 Allen Drive Plugs O-ring, 9/16-18 2-499S-8005 Allen Drive Plugs O-ring, 3/4-16 2-499S-8006 Allen Drive Plugs O-ring, 7/8-14 2-499S-8007 O-ring Plug 2-499S-8008 Allen Drive Plugs O-ring, 1 1/16-12 2-499S-8009 Allen Drive Plugs O-ring, 1 3/16-12 2-499S-8010 Plug 2-499S-8105 A/C Sys. Box Liner 1-859S-8750 Full Nut, 1/4-20, bulk 2-1289S-8752 Full Nut, 3/8-16, bulk 2-1299S-8895 Tee Test TG Plug, 11/16" 2-499S-8927 Tee Test TG Plug, 9/16" 2-499S-9100 Load Positioner, 2000 lb 1-889S-9101 Load Positioner, 4000 lb 1-889S-9149 Offset Wrench, box, chrome 1-369S-9150 Terminal Crimp Tool 2-779S-9334 Allen Drive Plugs O-ring, 1 5/16-12 2-499T-6322 Metric Plugs, M14 x 1.5 2-509T-6865 Adapter Plug 2-1139U-5006 Torque Wrench, 1/2" 1-58

9U-5007 Torque Wrench, 3/4" 1-589U-5009 Electronic Torque Tester, 1/4" 1-619U-5010 Electronic Torque Tester, 3/8" 1-619U-5011 Electronic Torque Tester, 3/8" 1-619U-5012 Electronic Torque Tester, 1/2" 1-619U-5013 Electronic Torque Tester, 3/4" 1-619U-5014 Dial Type Torque Wrench,

3/4 in 1-58, 1-599U-5015 Dial Type Torque Wrench,

3/4 in 1-58, 1-599U-5016 Dial Type Torque Wrench, 1/2 in 1-589U-5017 Dial Type Torque Wrench, 3/8 in 1-589U-5019 Torque Wrench, 3/8" 1-589U-5020 Torque Wrench, 3/8" 1-589U-5026 Orange Hand Cleaner

(smooth), 7.5 fl oz 3-359U-5027 Orange Hand Cleaner

(smooth), 1 gal 3-359U-5028 Orange Hand Cleaner

(w/ pumice), 7.5 fl oz 3-359U-5029 Orange Hand Cleaner

(w/ pumice), 1 gal 3-359U-5030 Wall Mount Bracket

for 1 gal Container 3-359U-5031 Oil Dye, Red 3-239U-5032 Oil Dye, Blue 3-239U-5053 Screw Thread Insert, Repair Kit 2-429U-5054 Screw Thread Insert,

Replacement Kit 2-429U-5055 Screw Thread Insert, Repair Kit 2-429U-5056 Screw Thread Insert,



Replacement Kit 2-429U-5089 Impact Socket, Standard

Length 1 in Drive, 36.0 mm 1-349U-5101 Mounting Bracket 1-619U-5121 Screw Thread Insert,

Spark Plug 2-39, 2-409U-5122 Insert, Screw Thread,

Spark Plug 2-39, 2-409U-5123 Screw Thread Insert,



Spark Plug 2-39, 2-409U-5130 Combination Wrench,

46 mm (1-13/16") 1-24, 1-359U-5155 O-Ring Measuring Cone 22--1133009U-5177 Special Length Heli-Coil

Screw Thread Insert 2-409U-5590 Double Insulated Ex.

H-D Angle Elect. Drill 11--77669U-5604 Special Length Heli-Coil

Screw Thread Insert 2-409U-5612 Heavy-Duty Box Wrench, 55 mm 1-599U-5614 Shield 2-489U-5615 Collet Nut-Brass 2-489U-5784 Battery Charging Rack 22--55999U-5794 Tap 2-359U-5839 Liquid Gasket 3-69U-5922 High Performance Duct Tape, 2" 22--1111889U-5932 Camshaft Torque Extension 1-599U-6009 Fluorescent Lamp,

110V/13 Watt 2-71, 2-729U-6010 Magnetic Mount 2-719U-6011 Vapor Clamp Kit 2-719U-6070 Heat Gun, (115V) 2-779U-6072 Heat Gun, (220V) 2-779U-6075 Toolmaker's Ink 3-239U-6076 Toolmaker's Ink 3-239U-6124 Metric Universal Socket Set 11--2288

9U-6125 Universal Socket, 10 mm 1-28, 1-329U-6126 Universal Socket, 12 mm 1-28, 1-329U-6127 Universal Socket, 13 mm 1-28, 1-329U-6128 Universal Socket, 14 mm 1-28, 1-329U-6129 Universal Socket, 15 mm 1-28, 1-329U-6130 Universal Socket, 16 mm 1-28, 1-329U-6131 Universal Socket, 17 mm 1-28, 1-329U-6132 Universal Socket, 18 mm 1-28, 1-329U-6133 Universal Socket, 19 mm 1-28, 1-329U-6219 Tool Box 1-6, 1-8, 1-9, 11--88339U-6282 Torque Extension 1-599U-6360 Urethane Paint Reducer, 1 gal 3-409U-6362 Connector, 15 Amp, 125V AC 2-759U-6363 Plug, 15 Amp, 125V AC 2-759U-6364 Connector, 15 Amp, 250V AC 2-759U-6365 Plug, 15 Amp, 250V AC 2-759U-6366 Connector, 20 Amp, 125V AC 2-759U-6367 Plug, 20 Amp, 125V AC 2-759U-6368 Connector, 20 Amp, 250V AC 2-759U-6369 Plug, 20 Amp, 250V AC 2-759U-6370 Connector, Heavy-Duty

15 Amp, 125V AC 2-759U-6371 Plug, Heavy-Duty 15 Amp, 125V AC 2-759U-6372 Connector, Heavy-Duty

20 Amp, 250V AC 2-759U-6373 Plug, Heavy-Duty

20 Amp, 250V AC 2-759U-6374 Cord Grip Connector,

20 Amp, 125/250V w/ Ins. 2-759U-6375 Cord Grip Plug,

20 Amp, 125/250V w/ Ins. 2-759U-6376 Connector,

20 Amp, 250V w/ Ins. Cord Grip 2-759U-6377 Connector,

20 Amp, 250V w/ Ins. Cord Grip 2-759U-6378 Connector,

30 Amp, 125V w/ Ins. Cord Grip 2-759U-6379 Plug, 30 Amp, 125V w/ Ins.

Cord Grip 2-759U-6380 Connector, 30 Amp, 250V w/

Ins. Cord Grip 2-759U-6381 Plug, 30 Amp, 250V w/

Ins. Cord Grip 2-759U-6382 Raised Hub Wheel,


Type 27, Hi Perf., Z/A24 2-199U-6503 Metric Size Tap, Plug 2-359U-6517 Ratchet Wrench 11--33779U-6523 Impact Socket, Standard

Length 3/4" Drive (17 mm) 1-30, 1-339U-6524 Impact Socket, Standard


Length 3/4 in Drive, (20 mm) 1-30, 1-339U-6526 Impact Socket, Standard








Length 3/4" Drive (30 mm) 1-8, 1-30, 1-339U-6534 Impact Socket, Standard



Length 3/4" Drive (33 mm) 1-8, 1-30, 1-33


Part Number Index


9U-6537 Impact Socket, Standard Length 3/4" Drive (34 mm) 1-30, 1-33







9U-6544 Impact Socket, Standard Length 3/4" Drive, (43 mm) 1-30, 1-33



9U-6547 Impact Socket Set, 24 Piece, 3/4 11--33009U-6548 Sockets, 1" sq dr impct 3/4" 1-199U-6549 Sockets, 1" sq dr impct 13/16" 1-199U-6550 Sockets, 1" sq dr impct 7/8" 1-199U-6551 Sockets, 1" sq dr impct 15/16" 1-199U-6552 Sockets, 1" sq dr impct 1" 1-199U-6553 Sockets, 1" sq dr impct 1 1/16" 1-199U-6554 Sockets, 1" sq dr impct 1 1/8" 1-199U-6555 Sockets, 1" sq dr impct 1 3/16" 1-199U-6556 Sockets, 1" sq dr impct 1 1/4" 1-199U-6557 Sockets, 1" sq dr impct 1 5/16" 1-199U-6558 Sockets, 1" sq dr impct 1 3/8" 1-199U-6559 Sockets, 1" sq dr impct 1 7/16" 1-199U-6560 Sockets, 1" sq dr impct 1 1/2" 1-199U-6561 Sockets, 1" sq dr impct 1 9/16" 1-199U-6562 Sockets, 1" sq dr impct 1 5/8" 1-199U-6563 Sockets, 1" sq dr impct 1 11/16" 1-199U-6564 Sockets, 1" sq dr impct 1 3/4" 1-199U-6565 Sockets, 1" sq dr impct 1 13/16" 1-199U-6566 Sockets, 1" sq dr impct 1 7/8" 1-199U-6567 Sockets, 1" sq dr impct 1 15/16" 1-199U-6568 Sockets, 1" sq dr impct 2" 1-199U-6569 Sockets, 1" sq dr impct 2 1/16" 1-199U-6570 Sockets, 1" sq dr impct 2 1/8" 1-199U-6571 Sockets, 1" sq dr impct 2 3/16" 1-199U-6572 Sockets, 1" sq dr impct 2 3/16" 1-199U-6573 Sockets, 1" sq dr impct 2 1/4" 1-199U-6574 Sockets, 1" sq dr impct 2 5/16" 1-199U-6575 Sockets, 1" sq dr impct 2 3/8" 1-199U-6576 Sockets, 1" sq dr impct 2 7/16" 1-199U-6577 Sockets, 1" sq dr impct 2 9/16" 1-199U-6578 Sockets, 1" sq dr impct 2 5/8" 1-199U-6579 Sockets, 1" sq dr impct 2 11/16" 1-199U-6580 Sockets, 1" sq dr impct 2 3/4" 1-199U-6581 Sockets, 1" sq dr impct 2 13/16" 1-199U-6582 Sockets, 1" sq dr impct 2 7/8" 1-199U-6583 Sockets, 1" sq dr impct 2 15/16" 1-199U-6584 Sockets, 1" sq dr impct 3" 1-199U-6635 Ratchet, 1/4" Drive 1-20, 1-349U-6636 Repair Kit, Ratchet, 30 Tooth Gear 1-209U-6637 Ratchet Wrench 1-209U-6638 Ratchet Repair Kit, 30 tooth gear 1-209U-6639 Rachet Wrench 1-209U-6640 Ratchet Repair Kit, 30 tooth gear 1-209U-6708 Clear Outer Tube 2-71, 2-729U-6709 Switch Assy 2-71, 2-729U-6710 Fluorescent Light Kit (110V) 22--77229U-6711 Ballast 2-729U-6712 Fluorescent Lamp 12V/13 Watt 2-719U-6714 Ballast Box Kit 2-729U-6734 Impact Socket 1-199U-6901 Metric Taps 2-359U-6902 Metric Tap 2-359U-6910 Aluminum Tape 2-1189U-6911 Aluminum Tape 2-1189U-6912 Aluminum Tape 2-1189U-6917 General Purpose Cleaner 3-8

9U-6919 Butyl Sealant 3-89U-6921 Surf Recond Disc,

Edge Wear SE 7" 2-79U-6922 Surf Recond Disc,


Wear SE 5" x 7/8" 2-79U-6924 Surf Recond Disc,


Wear, SE 4" x 7/8" X 2-79U-6926 Surf Recond Disc,

Wear, Roloc, 3" 2-7, 2-89U-6927 Surf Recond Disc,

Wear, Roloc, 2" 2-7, 2-89U-6928 Surf Recond a Coarse Disc 2-119U-6929 Surf Recond a Coarse Disc 2-119U-7042 Aluminum Tape 2-1189U-7067 Tapered Dual-Function Cap/Plug 2-519U-7068 Tapered Dual-Function Cap/Plug 2-519U-7069 Tapered Dual-Function Cap/Plug 2-519U-7070 Tapered Dual-Function Cap/Plug 2-519U-7071 Tapered Dual-Function Cap/Plug 2-519U-7072 Tapered Dual-Function Cap/Plug 2-519U-7073 Tapered Dual-Function Cap/Plug 2-519U-7074 Tapered Dual-Function Cap/Plug 2-519U-7075 Tapered Dual-Function Cap/Plug 2-519U-7076 Tapered Dual-Function Cap/Plug 2-519U-7077 Tapered Dual-Function Cap/Plug 2-519U-7078 Tapered Dual-Function Cap/Plug 2-519U-7079 Tapered Dual-Function Cap/Plug 2-519U-7080 Tapered Dual-Function Cap/Plug 2-519U-7081 Tapered Dual-Function Cap/Plug 2-519U-7082 Tapered Dual-Function Cap/Plug 2-519U-7084 Tapered Dual-Function Cap/Plug 2-519U-7085 Tapered Dual-Function Cap/Plug 2-519U-7086 Tapered Dual-Function Cap/Plug 2-519U-7087 Tapered Dual-Function Cap/Plug 2-519U-7088 Tapered Dual-Function Cap/Plug 2-519U-7089 Tapered Dual-Function Cap/Plug 2-519U-7090 Tapered Dual-Function Cap/Plug 2-519U-7091 Tapered Dual-Function Cap/Plug 2-529U-7092 Tapered Dual-Function Cap/Plug 2-529U-7094 Tapered Dual-Function Cap/Plug 2-529U-7095 Tapered Dual-Function Cap/Plug 2-529U-7096 Tapered Dual-Function Cap/Plug 2-529U-7098 Plug Protects for NPT thread

sq. hd. 2-549U-7099 Plug protectors

for NPT thread sq. hd. 2-549U-7100 Plug protectors


for NPT thread - sq. hd. 2-549U-7102 Plug protectors


for NPT thread - knurled head 2-549U-7104 Threaded and slotted

plug protectors 2-539U-7105 Threaded and slotted








plug protectors 2-53

9U-7113 Threaded and slotted plug protectors 2-53

9U-7114 Threaded plug protectors for flared fittings 2-54


9U-7116 Threaded Plug protectors for flared fittings 2-54




9U-7120 Cap/Plug Protectors 2-559U-7121 Tear cap protectors

for standard thread 2-559U-7122 Tear cap protectors

for standard thread 2-559U-7123 Tear cap protector



for standard thread 2-559U-7126 Tear Cap protectors






for standard threads 2-559U-7132 Tear cap protectors




for standard thread 2-559U-7136 Metric threaded plug protectors 2-539U-7137 Metric threaded plug protectors 2-539U-7138 Metric threaded plug protectors 2-539U-7139 Metric threaded plug protector 2-539U-7140 Metric Threaded Plug Protectors 2-539U-7141 Metric threaded plug protectors 2-539U-7142 Metric Threaded Plug Protectors 2-539U-7143 Metric threaded plug protectors 2-539U-7144 Metric threaded plug protectors 2-539U-7145 Metric cap protectors 2-539U-7146 Metric threaded cap protectors 2-539U-7147 Metric threaded cap protectors 2-539U-7148 Metric threaded cap protectors 2-539U-7149 Metric threaded cap protector 2-539U-7150 Metric threaded cap protector 2-539U-7151 Metric threaded cap protectors 2-539U-7152 Metric threaded cap protectors' 2-539U-7153 Metric Threaded cap protector' 2-539U-7154 Flange Bolt Protector, 1/2 NPT 2-559U-7155 Flange Bolt Protector, 3/4 NPT 2-559U-7156 Flange Bolt Protector, 1 NPT 2-559U-7157 Flange Bolt Protector, 1 1/4 NPT 2-559U-7158 Flange Bolt Protector, 1 1/2 NPT 2-559U-7159 Flange Bolt Protector, 2 NPT 2-559U-7160 Flange Bolt Protector, 2 1/2 NPT 2-559U-7161 Flange Bolt Protector, 3/4 NPT 2-559U-7162 Flange Bolt Protector, 1 NPT 2-559U-7163 Flange Bolt Protector, 1 1/4 NPT 2-559U-7164 Flange Bolt Protector, 1 1/2 NPT 2-559U-7165 Flange Bolt Protector, 2 NPT 2-559U-7166 Non threaded cap protector 2-529U-7167 Non threaded cap protector 2-52



Part Number Index

9U-7168 Non threaded cap protector 2-529U-7169 Non threaded cap protectors 2-529U-7170 Non threaded cap protectors 2-529U-7171 Non threaded cap protectors 2-529U-7172 Non threaded cap protector 2-529U-7173 Non threaded cap protector 2-529U-7174 Non threaded cap protector 2-529U-7175 Non threaded cap protector 2-529U-7176 Non threaded cap protector 2-529U-7177 Non threaded cap protector 2-529U-7178 Non threaded cap protector 2-529U-7179 Non threaded cap protector 2-529U-7180 Non threaded cap protector 2-529U-7181 Non threaded cap protector 2-529U-7182 Non threaded cap protector 2-529U-7183 Non threaded cap protector 2-529U-7184 Non threaded cap protector 2-529U-7185 Non threaded cap 2-529U-7186 Non threaded cap protector 2-529U-7187 Non threaded cap protector 2-529U-7188 Non threaded cap protector 2-529U-7189 Non threaded cap protector 2-529U-7190 Non threaded cap protector 2-529U-7191 Non threaded cap protector 2-529U-7192 Non threaded cap protector 2-529U-7193 Non threaded capprotector 2-529U-7194 Non threaded cap protector 2-529U-7195 British Tread BSP/GAS Plug

Protectors, 1/8 in - 28 TPI 2-559U-7196 British Tread BSP/GAS Plug







Protectors, 1 in - 11 TPI 2-559U-7203 Fluorescent Work Lights, 12v 2-719U-7231 Mini-Maglite Flashlight 22--66779U-7239 Liquid Butyl Resealant 3-89U-7251 Automatic Transmission Fluid 3-329U-7252 Automatic Transmission Fluid 3-329U-7253 Automatic Transmission Fluid 3-329U-7254 Automatic Transmission Fluid 3-329U-7283 Plug 2-359U-7289 Stainless Steel Pocket Scale 11--55009U-7290 Screwdriver Set 11--44449U-7291 Ratcheting Screwdriver 11--44559U-7309 Mudflaps 2-1119U-7310 Mudflaps 2-1119U-7326 Tape Measure, 1/2" x 6' 1-499U-7327 Tape Measure, 1/2" x 10' 1-499U-7328 Bit Set, 6-piece 11--44559U-7329 Universal Level 11--44999U-7375 Heavy-Duty Box Wrench, 46 mm 1-599U-7376 Slugging Wrench 1-399U-7377 Etching Pen 22--1111119U-7411 Calibration Fluid, 3.79 l (1 gal) 3-339U-7418 Hex Bit Socket (19 mm) 1-319U-7419 Hex Bit (19 mm) 1-5, 1-439U-7551 Air Conditioning Pump Lubricant 3-289U-7714 Black Paint, Flat, 1 gal 3-399U-7717 Black Paint, Medium

Gloss 3.5 VOC, 1 gal 3-399U-7718 Black Paint, Medium

Gloss 3.5 VOC, 5 gal 3-399U-7719 Cat Yellow High

Gloss 3.5 VOC Paint, 1 gal 3-399U-7720 Cat Yellow High

Gloss 3.5 VOC Paint, 5 gal 3-39

9U-7721 Yellow Urethane Paint, High Gloss, 1 gal 3-39

9U-7723 Urethane Hardener 3-399U-7725 Yellow Paint, High Gloss

Water Reducible 2.8 VOC, 1 gal 3-399U-7726 Yellow Paint, High Gloss

Water Reducible 2.8 VOC, 5 gal 3-399U-7731 Black Paint, Medium Gloss

Water Reducible 2.8 VOC, 1 gal 3-399U-7732 Black Paint, Medium Gloss

Water Reducible 2.8 VOC, 5 gal 3-399U-7918 Label Maker Kit 22--1122559U-7919 Character Wheel, a-z, 2-9 2-1259U-7920 Alum Tape roll, No Adhes

1/2" x 16' 2-1259U-7921 Alum Tape roll, No Adhes

1/2" x 12' 2-1259U-7922 Stainless st tp rl,

No Adhes 1/2" x 21' 2-1259U-7923 Date/Time Stamp 22--1122559U-7946 Bright Beige Paint,

Medium Gloss, 12 oz Aerosol 3-389U-7947 Bright Beige Paint,

Medium Gloss, 1 gal 3-389U-7948 Dawn Gray Paint,

Medium Gloss, 12 oz Aerosol 3-389U-7949 Dawn Gray Paint,

Medium Gloss, 1 gal 3-389U-7950 Green Paint, High Gloss for

Barber-Greene, 12 oz Aerosol 3-389U-7951 Green Paint, High Gloss

for Barber-Greene, 1 gal 3-389U-7968 Push Bar 1-6, 1-99U-7971 Air Filter Cleaner 3-99X-2004 Diesel Engine Oil, 40 3-149X-2010 Transmission/Drive Train Oil, 30 3-179X-2012 Transmission/Drive Train Oil, 50 3-179X-2014 Hydraulic Oil, 10W 3-199X-2037 Hydraulic Oil Additive 3-209X-6171 Hydraulic Oil, 10W 3-199X-6178 Diesel Engine Oil, 30 3-149X-6185 Gear Oil, 85W-140 3-199X-6271 Diesel Engine Oil, 30 3-149X-6272 Diesel Engine Oil, 40 3-149X-6462 Diesel Engine Oil, 30 3-149X-6463 Diesel Engine Oil, 40 3-149X-6466 Transmission/Drive Train Oil, 30 3-179X-6467 Transmission/Drive Train Oil, 30 3-179X-6468 Hydraulic Oil, 10W 3-199X-6469 Gear Oil, 80W-90 3-199X-6470 Gear Oil, 80W-90 3-199X-6488 Multipurpose Grease, keg, 54 kg 3-219X-6489 Advanced 3Moly Grease,

Grade 2, keg, 54 kg 3-219X-6585 Antifreeze/Coolant 3-129X-6586 Antifreeze/Coolant 3-129X-8267 Washer, M6, bulk 2-1299X-8443 Transmission/Drive Train Oil, 50 3-179X-8469 Transmission/Drive Train Oil, 30 3-179X-8525 Transmission/Drive Train Oil, 10W 3-179X-8526 Natural Gas Engine Oil, 30 3-169X-8527 Natural Gas Engine Oil, 40 3-169X-8528 Diesel Engine Oil, 40 3-149X-8529 Diesel Engine Oil, 40 3-149X-8530 Transmission/Drive Train Oil, 50 3-179X-8531 Transmission/Drive Train Oil, 50 3-179X-8532 Hydraulic Oil, 10W 3-199X-8533 Hydraulic Oil, 10W 3-199X-8535 Gear Oil, 85W-140 3-19


2007Cat® ShopSupplies andHand Tools

PECJ0003 www.cat.com Printed in USA © 2006 Caterpillar All Rights Reserved(Replaces GECJ0001-01)

CAT, CATERPILLAR their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein,are trademarks of Caterpillar and may not be used without permission.

2007Cat

®ShopSuppliesandHandTools

1.800.542.8665 option 4 (USA)

1.800.541.8665 option 4 (Illinois)

1.800.523.8665 option 4 (Canada)

Shop Supplies and Hand ToolsSSSSHHTT@@ccaatt..ccoomm (Internet e-mail)

++41 (22) 849 40 48 / 4428 (Geneva Phone)

++41 (22) 849 49 29 (Geneva Fax)

For additional information on our products, use the appropriate link below for your Market:

NACD Dealers:https://nacd.cat.com/infocast/frames/prodsupp/supplies/

APD Dealers:https://apdnet.cat.com/cda/layout?m=54340&x=7

LACD Dealers:https://lacd.cat.com/cda/layout?m=61903&x=7

EAME Dealers:https://eame.cat.com/cda/layout?m=48900&x=7

Caterpillar® Dealers and Customers expect

hard working tools and supplies. Cat Shop

Supplies and Tools Deliver!

https://nacd.cat.com/infocast/frames/prodsupp/supplies/

https://apdnet.cat.com/cda/layout?m=54340&x=7

https://lacd.cat.com/cda/layout?m=61903&x=7

https://eame.cat.com/cda/layout?m=48900&x=7

20 2007 C Shop Supplies and Hand Tools - dozerparts

Documents

Transcript of 20 2007 C Shop Supplies and Hand Tools - dozerparts