2 street lighting lUnOiDe LUNOIDE - :: Silux :: WIRING gear tray in gLass fibre technopoLymer...
Transcript of 2 street lighting lUnOiDe LUNOIDE - :: Silux :: WIRING gear tray in gLass fibre technopoLymer...
street lighting
lUnOiDe
LUNOIDE2
3
STRUCTURE
Lower supporting frame in die-cast aLuminium
en 1706, coLour raL 7038.
upper canopy in technopoLymer (Lunoide) or
die-cast aLuminium en 1706, coLour raL 7035
(Lunoide aLLuminium and aLLumcoLor, coLour
raL 5017 - 6028),
hinged in the front and cLosed in the back
with a fast-reLease hook in poLycarbonate.
mechanism to bLock the canopy in the open
position with a speciaL sLider that prevents
accidentaL cLosure. stainLess steeL screws
and boLts.
universaL Joint for horizontaL brackets
Ø 60mm and post-top Ø 60-70mm.
system for the incLination of the device,
consisting of a rotating unit in die-cast
aLuminium en 1706 with goniometric adJustment
every 4° - 5°.
post-connection pLate in aisi 304 stainLess steeL.
protection degree:
opticaL compartment ip66.
controL gear compartment ip44.
insuLation cLass i and ii.
LUNOIDE
4 street lighting
lUnOiDe
5
Coordinate system C-Gamma, polar graph.
street Lighting
OPTICAL UNIT
Lamp hoLder in porceLain with the possibiLity
to adJust the Lamp focus according to its
wattage. high performance cut-off optic
in 99.85% mouLded by drawing, anodised and
poLished aLuminium.
the prismatic pattern optimises the Light
emission and makes a LateraL opening of 75°
possibLe, even in the vp version;
in this way the spacing between the posts
can equaL 4 times the post height.
150W SHP-T 250W SHP-T
street Lighting
ST
AVAILABLE WATTAGES
from 70w to 400w shp-mhL.
from 80w to 250w mbf.
180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Lunoide150WSHP-T
60
60
120
180
240
300
180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Lunoide250WSHP-T
60
60
120
180
240
300
Gamma Angles Gamma Angles
Coordinate system C-Gamma, polar graph.
6 street lighting
lUnOiDe
H: (m) post height.
I: (m) spacing.
L: (m) street width.
S: (m) device proJection.
Lm: (cd/m2) average Luminance.
U0: generaL uniformity.
Ul: LongitudinaL uniformity.
Ti: gLare factor.
Em: (LuX) average iLLumination.
Mf: maintenance coefficient.
Tilt: device incLination angLe.
STREET LIGHTING H I L S Tab. R Lm U0 Ul Ti% Em Mf Tilt
LUNOIDE 250 W SHP-T staggered 9 36 18,00 1,00 c2 2,10 0,44 0,70 7,2% 34 0,80 0LUNOIDE 250 W SHP-T unilateral right 10 39 10,00 0,00 c2 1,50 0,49 0,73 8,98% 27 0,80 0LUNOIDE 150 W SHP-T unilateral right 8 35 8,00 0,00 c2 1,00 0,48 0,57 8,98% 18 0,80 0LUNOIDE 150 W SHP-T unilateral right 8 30 8,00 0,00 c2 1,10 0,50 0,72 8,17% 20 0,80 0LUNOIDE 100 W SHP-T unilateral right 7 28 7,00 0,00 c2 1,00 0,45 0,65 8,73% 17 0,80 0
INSTALLATION EXAMPLES
7
WIRING
gear tray in gLass fibre technopoLymer
incLuding: power suppLy unit, ignitor, capacitor
and Lamp hoLder; equipped with a fast-reLease
hook system that makes it possibLe to remove
the entire eLectricaL unit in a singLe piece
without the use of tooLs.
on-Load switch automaticaLLy interrupts
the power suppLy when the device is opened,
aLLowing the operator to work in maXimum
safety.
insuLation cLass i and ii.
REFERENCE STANDARDS
CE03
en 60598-1
en 60598-2-1
en 60598-2-3
8 street lighting
lUnOiDe
9
LUNOIDE: Lower frame in die-cast aLuminium
raL 7038 and canopy in technopoLymer with
uv-protection treatment raL 7035.
LUNOIDE ALLUMINIUM: Lower frame in die-
cast aLuminium raL 7038 and canopy in die-
VP: cut-off fLat gLass
cast aLuminium raL 7035.
LUNOIDE ALLUMCOLOR BLU RAL 5017:
Lower frame in die-cast aLuminium raL 7038
and canopy in die-cast aLuminium raL 5017.
LUNOIDE ALLUMCOLOR VERDE RAL 6028:
Lower frame in die-cast aLuminium raL 7038
and canopy in die-cast aLuminium raL 6028.
AVAILABLE VERSIONS AND COLOURS
LAMP LUNOIDE VP
70 W SHP e-t100 W SHP e-t150 W SHP e-t250 W SHP e-t400 W SHP t
70 W MHL e100 W MHL e150 W MHL e250 W MHL e-t400 W MHL t
80 W MBF e125 W MBF e250 W MBF e
360
715
305
715
/7660Ø
60Ø
LUNOIDE VP LUNOIDE PL LUNOIDE CL
LUNOIDE VP ALLUMINIUM LUNOIDE VP ALLUMCOLOR RAL 5017
LUNOIDE VP ALLUMCOLOR RAL 6028
LAMP LUNOIDE PL
70 W SHP e-t100 W SHP e-t150 W SHP e-t250 W SHP
400 W SHP
70 W MHL e100 W MHL e150 W MHL e250 W MHL
400 W MHL
80 W MBF e125 W MBF e250 W MBF
LAMP LUNOIDE CL
70 W SHP e-t100 W SHP e-t150 W SHP e-t250 W SHP e-t400 W SHP
70 W MHL e100 W MHL e150 W MHL e250 W MHL e-t400 W MHL
80 W MBF e125 W MBF e250 W MBF e
PL: semi-cut-off pmma bowL CL: semi-cut-off gLass bowL
versions for cdo-et and cdo-tt Lamps (order shp wiring) E: eLLipsoidaL T: tubuLar
360
715
305
715
/7660Ø
60Ø
10 street lighting
lUnOiDe
postØ60-65
postØ70-76
130
130
3 dowels M5x120
3 dowels M5x120
postØ60-65
postØ70-76
130
130
3 dowels M5x120
3 dowels M5x120
11
ML-SERIES BRACKETS
bracket consisting of a curved horizontaL
tube with Ø 60mm, proJection 1000mm.
Joint compatibLe with conicaL
or tapered posts Ø 60-65-70-76mm.
finaL spigot for Joint to the device
Ø 60mm, Length 100mm.
spigot for Joint to the post Ø 48mm, Length
200mm, with weLd washer disc
in turned steeL.
finaL connection to the post with
stainLess steeL doweLs.
centraL fairing Ø 350mm
in aLuminium sheet composed of two pieces
assembLed with stainLess steeL screws and
boLts.
bracket coLour: raL 7035.
decor (ovaL) coLour: raL 7038.
versions with 1-2-3-4 brackets.
when ordering, pLease state the post
diameter of the post diameter on which the
brackets are to be instaLLed.
350Ø
54Ø
305
315
1715
1000
RAL 7038 (COD. 09)
the post must be pre-set
with 3 head doweLs
RAL 7035 (COD. 05)
TYPECOLOURS
DESCRIPTIONBRACKET OVAL
ML 1.1 L= 1000 unit with 1 bracketML 2.1 L= 1000 unit with 2 bracketsML 3.1 L= 1000 unit with 3 bracketsML 4.1 L= 1000 unit with 4 brackets
12 street lighting
lUnOiDe
13
1715
1000
305Ø 4
2
300
Ø 42
Ø 102
MV/K-SERIES BRACKETS
bracket made of hot-gaLvanised tubuLar
steeL, Ø 42mm, with Joint spigot
Ø 60mm, curved, with mouLded decoration in
gaLvanised steeL.
proJection 1000mm.
post-top Joint for posts
Ø 60-70mm.
device insertion Ø 60mm.
stainLess steeL screws and boLts.
coLour raL 7035.
versions with 1-2-3 brackets.
the post must be pre-set
with 3 head doweLs
RAL 7035 (COD. 05)
TYPE COLOURS DESCRIPTION
MV/K 1.10 L= 1000 1 side bracket MV/K 2.10 L= 1000 unit with 2 bracketsMV/K 3.10 L= 1000 unit with 3 brackets
Post Ø 60-70
130
N°3 dowels M8x120
N°3 dowels M10x120L.max 25
14 street lighting
lUnOiDe
8,0m
9,0m
6,0m
15