2 channel infrared IR remote control board iR-2R User manual
Click here to load reader
-
Upload
jayprakash-shet -
Category
Devices & Hardware
-
view
222 -
download
0
description
Transcript of 2 channel infrared IR remote control board iR-2R User manual
iknow
vati
ons
July 2014 Doc-iR2R-UM-Rev1.0 1/8iknowvations.in
User Manual
User manual2 Channel IR Remote Control Relay Board - iR-2R
1
iknow
vati
ons
User manual
July 2014 2/8iknowvations.in
IR-2R detail
Power connector for 12 V dc
You can use 7-12 Vdc if you
want to use optional outputs
instead of Relays.
IR sensor
Optional outputs
1 & 2 (open collector)
Relay 1
Relay
output
connectors
2
Relay 1 LED
Relay 2 LED
IR sensor
Solder Bridge
(remove if you want
to use 7-12 VDC
& optional outputs)
+Ve
-Ve
Relay 2
Power LED
NO
Common
NC
Relay Outputs
2 Channel IR Remote Control Relay Board - iR-2R
Doc-iR2R-UM-Rev1.0
iknow
vati
ons
User manual
July 2014 3/8iknowvations.in
3
Pin 1
Pin 2
Pin 3
Pin 4
Pin 1
Pin 2
Pin 3
Pin 4
Connector 3 - CN3 ( to operate Relays manually) details.
Connect Pin 1 & Pin 3 to manually
operate Relay 1.
Connect Pin 2 & Pin 4 to manually
operate Relay 2.
Connector 5 - CN5 ( to operate Relays in Momentary mode) details.
Connect Pin 1 & Pin 3 to operate
Relay 1 in Momentary mode.
Connect Pin 2 & Pin 4 to operate
Relay 2 in Momentary mode.
Default mode is Toggle mode
where Relay will be ON when relative
button is pressed on Handset. Relay will
be OFF if button is pressed again.
In Momentary mode, the Relay will be ON
till relative button is kept pressed.
2 Channel IR Remote Control Relay Board - iR-2R
Doc-iR2R-UM-Rev1.0
July 2014 4/8iknowvations.in
iknow
vati
ons
User manual
Remote handset detail
All On
All Off
Relay 1 to 9
Relay 10
Relay 11
Relay 12
All On
All Off
Relay 1 to 9
Relay 10
Relay 11
Relay 12
This is default option.
Other options are used when you want to operate two
or more 2 channel boards in same room and you want to operate
them with the same remote at a time. You have to specify at the time
of placing order if you want to have more than one option.
Please note that Remote handset design may change from time to time but functions will
remain same.
4
Relay 1
Relay 2
Relay 1
Relay 2
Relay 1
Relay 2(Optional)
(Optional)
Relay 1 ON
Relay 1 OFF
Relay 2 ON
Relay 2 OFF
(Optional)
2 Channel IR Remote Control Relay Board - iR-2R
Doc-iR2R-UM-Rev1.0
Specifications -
Transmitter - IR Transmitter handset is common for all the receiver kits.
Based on RC5 Philips coding.
Requires 2 AAA battery.
Receiver - Outputs - 2 relays for iR-2R
Input supply - 12 V DC to operate Relays
7-12 V DC if you want to use additional
open collector outputs.
Relay contact rating - 5 amp at 230 V AC.
Features -
- Based on latest microcontroller.
- Two relay outputs for different kind of requirement.
- Potentially free NO & NC contact outputs.
- Momentary & Toggle mode selectable by DIP switch.
- All On & All Off facility.
- Long range
- Easy to add remote control facility to many projects
- Visual LED indication for each Relay.
- Visual LED indication for power.
- Small & Compact size.
Want something different ? More outputs ? Special requirements ?
Different configuration ? Just let us know at [email protected].
We will provide you solutions as per your requirements. After all our more
than 20 years experience helps .
Can be used for -
- Switching lights & fans on & off at homes, offices, shops, hotels etc. by IR remote.
- Switching motors on & off.
- Converting machines & equipments to be operated by IR remote.
- Replacing switches with IR remote.
iknow
vati
ons
July 2014 5/8iknowvations.in
User manual
5
2 Channel IR Remote Control Relay Board - iR-2R
Doc-iR2R-UM-Rev1.0
Making of Remote light switches using IR control relay boards iR-2R
12 V DC power supply
Neutral
Phase
Remote handset
IR sensor
Forward
Reverse
Common
On - off of Motor
230/110
V AC
iknow
vati
ons
July 2014 6/8iknowvations.in
User manual
For Motor on/off & forward/reverse,
use momentary function
6
On - off of Motor
Load (LED, Motor
actuator etc.)
7 - 12 V DC +ve
Using optional open collector outputs
for 7-12 VDC inputs. Remove Solder
bridge to use at these voltage levels.
Optional
open collector
output pin
2 Channel IR Remote Control Relay Board - iR-2R
Doc-iR2R-UM-Rev1.0
NO
Common
NC
If you have any questions, want any assistance, want us to develop any special products for you
just contact us at [email protected].
We have other products also that might interest you like -
U452 is an USB based Relay Card having 4 relays, up to 16
I/O channels & 8 ADC channels. The ADC resolution
is 8/10/12 bits user selectable.
Ethernet based DAQ & I/O card.
6 digit 7 segment Multipurpose LED Counter
For more information visit - www.iknowvations.in
6 channel IR Remote control Board - AZ6CR-03
iknow
vati
ons
July 2014 7/8iknowvations.in
User manual
R242 is an RS232 based Relay Card having 4 relays,
up to 9 I/O channels & 4 ADC channels. The ADC
resolution is 10 bits.
7
12 channel IR Remote control Board - iR-12C
2 Channel IR Remote Control Relay Board - iR-2R
Doc-iR2R-UM-Rev1.0
Information in this document is provided solely in connection with Iknowvations products. Iknowvations reserrve the right to make
changes, corrections, modifications or improvements, to this document, and the products and services described herein at
anytime, without notice.
All Iknowvations products are sold pursuant to Iknowvations terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the Iknowvations products and services described herein,
and Iknowvations assumes no liability whatsoever relating to the choice, selection or use of the Iknowvations products and services
described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document.
If any part of this document refers to any third party products or services it shall not be deemed a license grant by Iknowvations for
the use of such third party products or services, or any intellectual property contained therein or considered as a warranty
covering the use in any manner whatsoever of such third party products or services or any intellectual property contained
therein.
UNLESS OTHERWISE SET FORTH IN IKNOWVATIONS’S TERMS AND CONDITIONS OF SALE IKNOWVATIONS DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF IKNOWVATIONS PRODUCTS
INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING IKNOWVATIONS PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR
WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN
PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE
PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of IKNOWVATIONS products with provisions different from the statements and/or technical features set forth in this document
shall immediately void any warranty granted by Iknowvations for the Iknowvations product or service described herein and shall not create
or extend in any manner whatsoever, any liability of Iknowvations.
Please Read Carefully
www.iknowvations.in
Manufactured by -
Iknowvations
Rajivnagar,Vidyanagar
Hubli - 580031
India.
iknow
vati
ons
July 2014 8/8iknowvations.in
User manual
8
Contacts -
Web - iknowvations.in
Sales - [email protected]
Support - [email protected]
Information - [email protected]
Buy online at our Shoppee -
Http://shopee.iknowvations.in
2 Channel IR Remote Control Relay Board - iR-2R
Doc-iR2R-UM-Rev1.0