2 Akg Paper in Zijmr Vol1 Issue10 Oct2012 Cp
Click here to load reader
description
Transcript of 2 Akg Paper in Zijmr Vol1 Issue10 Oct2012 Cp
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
11
MERGERS AND ACQUISITION: STRATEGY TO DEAL WITH
DYNAMIC BEHAVIOR OF SUPPLY CHAIN MANAGEMENT
ANOOP KUMAR GUPTA*; SACHIN GUPTA**
*Assistant Professor,
Department of Management,
Maharaja Agrasen Institute of Technology,
Rohini, New Delhi.
**Assistant Professor,
Maharaja Agrasen Institute of Management Studies,
Rohini, New Delhi.
ABSTRACT
Supply chain management consists of complex decisions that need to be taken from time to time
in today‘s global competitive scenario. As the complexity of supply chain management increases
the decisions become more interdependent, more complex in nature and more cost gets involved.
This article classifies the complexity of supply chain according to the functional behaviors.
Studying the complexity will be helpful to gain competitive advantage in today‘s cut-throat
competition. The role and type of mergers and acquisition with respect to supply chain
management are also specified. Extensive literature review in area of supply chain management
and mergers & acquisition is also done and supply chain strategies under merger and acquisition
are discussed.
KEYWORDS: Complexity in Supply Chain, Mergers and Acquisition, Supply Chain
Management.
_____________________________________________________________________________
1. INTRODUCTION
In such a competitive situation every organization wants to be better than its competitor, and to
achieve that it requires customer satisfaction and needs to be a good service provider for long
period of time. All the operations must be done efficiently and effectively. Here the term
―operations‖ implies the activities that are required to satisfy the demand of a customer.
All the activities, e.g., choosing supplier for the raw material, delivery of raw material,
production process, i.e., converting raw material into semi-finished goods and finished goods,
packing and distribution to the wholesaler to retailer and then satisfying the demand of customer
by means of product and services together constitute the Supply chain management (SCM). SCM
consists of performing and managing operations in such a way that customer is satisfied.
Efficiently and effectively implies the smooth conduct of all the processes in such a manner that
the cost is minimum, for example while dealing with marketing, the goal of the organization is
maximizing service level; while dealing with distribution, the aim is maximizing throughput at
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
12
minimum cost; also while manufacturing, the aim becomes reduction in the finished goods
inventory.
Efficiency can be increased by the following ways:
• responding to wide range of quantities demanded by customers
• meeting short lead times
• handling a variety of products
• meeting very high service levels
There are various reasons by virtue of which SCM is growing day by day. Globalization,
dispersion in manufacturing and distribution facilities enhanced the role and need of SCM.
Demand for customized product is increasing for local markets. Due to introduction of electronic
commerce, electronic data interchange and internet technology, customer can see and respond to
the technological changes very fast. This makes him globally active and sensitive towards the
technological changes occurring at any other part of the world.
As supply chain management consists of numerous activities that are related to each other in
some or the other way. At every step we have to take decisions like
which supplier to choose for raw materials,
what kind of raw material to procure,
what product to produce,
where to produce, when to produce, how much to produce,
whom to sell (target customer),
what would be the target market,
what services are being provided to the customer by the organization, so on and so forth?
SCM can be defined as a task of integrating organizational units along a supply chain and
coordinating materials, information and financial flows in order to fulfill (ultimate) customer
demand with the aim of improving competitiveness of the supply chain as a whole. This
definition is best visualized in Fig. 1.1.
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
13
FIG. 1. ACTIVITIES AND FIRMS IN A SUPPLY CHAIN. SOURCE: NEW AND
PAYNE [35]
Decision taken at one step affects the decision of the next step, thus for the effectiveness of
supply chain every step is to be performed effectively and efficiently such that output of each
step is the same as required by the organization. So it is very much clear that to implement
supply chain management one must have skills to take right decision at right time.
As the nature and type of decisions are different and also different types of parameters and
constraints are to be taken into account while making any decision, the complexity of the
decision making increases with respect to the increase in complexity of supply chain system (as
number of suppliers, types of product, number of manufacturing units, number of retailers
increases). Large-scale nature of network in supply chain, hierarchical structure of decision
increases the complexity of decision making. Randomness of various inputs, operation and
dynamic nature of interaction among supply chain elements also make things difficult for
decision makers.
The randomness of supply chain results in dynamic behavior and stiff competition due to
globalization require such a decision that will result in expansion as well as cost minimization
that‘s why merger and acquisition is considered as strategic tool to deal with complexity of
supply chain management. One organization may be good in given environment but different
structure, process and technologies may create different problem and to deal with such a problem
merger and acquisition is considered as tool which can deal with dynamics of supply chain.
A merger is the result of mutual agreement of the management of two or more companies to
form a new joint legal entity through exchange of shares or other funds. An acquisition takes
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
14
place when the management of one company makes a direct offer to the shareholder of another
company to acquire controlling interest of the firm.
There are various types of mergers and acquisition that redefine the business world with new
strategic alliances. From business structure perspective the various types of mergers and
acquisition are as follows:
Horizontal mergers: both companies operate in same industry and are competitors in the same
market.
Vertical mergers: firms that operate in different stages of the same industry.
Conglomerate merger: two or more companies belonging to different industrial sector combine
their operations.
As far as SCM is concerned we will focus on horizontal and vertical mergers.
The rest of the study is organized as follows. In Section 2 literature review has been discussed. In
Section 3 the complexity of supply chain management has been explored. Section 4 explores the
mergers and acquisition in supply chain management. Section 5 concludes the article.
2. LITERATURE REVIEW
Supply chain management and other similar terms, such as network sourcing, supply pipeline
management, value chain management, and value stream management have become subjects of
increasing interest in last two decades or so, to academics, consultants and business management
(Christopher, [7]; Hines, [18]; Lamming, [24]; Saunders,[39][40]). Companies seek profit and
cost reduction in terms of efficiency of supply chain Christopher, [7]; Macbeth and Ferguson,
[30]. The development of supply chain management concept has been done in terms of theories.
Forrester [16] illustrates the industrial dynamics model applied to supply chains and provide the
basis on which dynamics of study has been done (Sterman, [44]; Towill, [48]; Van Ackere et al.,
[49]; Lee et al., [27]). Cooper et al.[10] support the view of dynamic behavior of supply chain
management and gives view to deal with the dynamic behavior that results is cost reduction and
increases the effectiveness and efficiency of supply chain management.
Christopher [7] defines ‗Supply chain management is a network of organizations that are
involved, through upstream and downstream linkages in the different processes and activities
that produce value in the form of products and services in the hand of the ultimate consumer.‘
Saunders [40] warns that pursuit of a universal definition may lead to unnecessary frustration and
conflicts, and also highlights the fragmented nature of the field of supply chain management,
drawing as it does on various antecedents including industrial economics, systems dynamics,
marketing, purchasing, and inter-organizational behavior. Croom et al. [12] made a very good
attempt to provide the literature review of supply chain management on the basis of principle
components of SCM (see Fig. 2).
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
15
FIG. 2. PRINCIPLE COMPONENT BODIES ON BASIS OF WHICH REVIEW OF SCM
IS DONE BY CROOM ET AL. [12]
Most of the above-mentioned literature admits the dynamic behavior of SCM. Various authors
emphasize on the structural aspect of supply chain to deal with the dynamic behavior.
Importance of Buyer--supplier partnership (Lamming [24]), supply base management, strategic
supplier alliances (Lewis [28]), supply chain synchronization (Tan et al. [47]), network supply
chain (Nassimbeni [34]), value-added chain (Lee and Ng [26]) are some of the major available
literature. Yet very few literatures are available to show the importance of mergers and
acquisition in SCM. Various authors emphasize on the importance of joint ventures, alliances,
mergers and acquisition for the growth and sustainability of company due to one or other reason.
Craven et al. [11] have done analysis of co-operative inter-organizational relationships, strategic
alliance formulation, and strategic alliance effectiveness. Day [13] and Collins [9] also stress on
teaming up for competitive superiority.
Hitt et al. [19] stated about the corporate objectives in which gain of greater market power, gain
access to innovative capabilities results in the reducing of risks associated with the development
of a new product or service, maximize efficiency through economies of scale and scope and
finally in some cases, reshape a firm‘s competitive scope. According to Kwoka [23], mergers
and acquisitions are among the most important phenomena of modern economies. Lichtenberg
and Siegel [29] put a remarkable effort on describing the direct relationship between productivity
and ownership change. Today‘s increasing globalization and competition force firms to identify
new and creative ways to perpetuate their businesses and possibly make a profit. Mergers and
acquisitions are one of those ways.
To face the challenges and explore the opportunities, firms are moving towards various strategic
alternatives like mergers and acquisitions (M&As), strategic alliances, joint ventures, etc. The
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
16
M&A are arguably the most popular strategy among firms who seek to establish a competitive
advantage over their rivals. In the last seven years, during the fifth merger wave, the value of
acquisitions has increased dramatically. In 2006 the total value of acquisitions undertaken
reached unprecedented levels, totaling Euro 1,774 billion (Vasilaki and O‘Regan [51]). Fig. 3
represents the number at which mergers and acquisition are increasing in India. The study of
Kumar [22] also shows the mergers and acquisition in terms of financial metrics which is
successful in Indian scenario.
FIG. 3. THE NUMBER OF MERGERS AND ACQUISITION IN INDIA. SOURCE:
KUMAR ET AL. [22]
The SCM literature views vertical integration as one extreme of vertical coordination of supply
chains (Hobbs and Young [20]), or as a fundamental to supply chain integration (Stonebraker
and Liao [46]). According to Rangan et al. [38], vertical integration helps the firms to secure the
distribution channels of their products, especially in markets with increased uncertainties,
whereas Frohlich and Westbrook [17] see it as way to control efficiency gains and cost
reductions in the supply chain. In order to capture the value downstream, manufacturers need to
expand their focus from operational excellence to customer allegiance and rethink the meaning
of vertical integration (Wise and Baumgartner [55]). Now let us see the complexity in supply
chain that may require mergers and acquisition in supply chain.
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
17
3. COMPLEXITY IN SUPPLY CHAIN MANAGEMENT
The complexity of supply chain depends upon the various factors like number of participants,
products, transportation link, information flow, etc. if one looks for desired outcome then he/she
needs to find the supply chain complexity so that decision making becomes easier (Bozarth et al.
[3] and Closs et al. [8]). How to deal with supply chain complexity is a key issue confronting
supply chain managers (Mentzer et al. [31], Choi and Krause [6]). Applying systems theory
(Dubois et al. [15]) state that in a complex system, a linear change in one part of a system may
cause nonlinear and unexpected changes in other parts of the system.
Choi and Hong [5] explore network complexity in which horizontal, vertical, and spatial
complexities are involved. Choi and Krause [6] elaborate supply base complexity related with
number of suppliers, degree of differentiation among suppliers, level of inter relationships
between suppliers.
Stock et al. [45] explore the dynamic problem that exists because of logistical complexity like
that of globalization (geographically dispersed network of resources). According to Blackhurst et
al. [2] complexity occurs because of multiple levels of suppliers, large network of
manufacturers/distributors, involvement with other supply chains, change and dynamic nature of
supply chain. Sivadasan et al. [41][42] considered operational and structural complexity as key
issue in supply chain management that affect supplier--customer relation.
Today‘s supply chain managers find their roles to be evolving into managing more complex
supply chains that are defined by rapidly changing, continuously expanding and often uncertain
business environments. Given the dynamism and uncertainty of the environment, supply chain
professionals take on responsibility for more complicated tasks and face increased challenges in
supply chain decision making. Due to the dynamic and large-scale nature of the supply chain, it
is impractical to enumerate all of the possible alternatives, activities, information queues,
transactions, linkages, and other factors proposed as drivers of supply chain complexity.
Now the concept of supply chain is nearly two decades old and all the complexity related to the
supply chain literature has been evolved in these two decades. There are various strategies that
are suggested to deal with the supply chain complexity. One of strategy named as merger and
acquisition has come out as solution for managers from past two decades as it can be verified
that number of mergers and acquisitions are increasing day by day (Fig. 3). Although the concept
of merger and acquisition, alliances and joint ventures are not new but used in plenty since the
concept of supply chain management came into existence.
4. MERGER AND ACQUISITION
There are various reasons due to which merger and acquisition take place (Walter & Barney [53],
Weston & Weaver [54]). The foremost reason can be considered as growth, when internal
growth measured does work well companies seek merger and acquisition as a tool for growth
(van Wegberg [50]). Next reason for company is for merger and acquisition which is of survival
when company seeks market share and the fear of being left behind in competition exists because
of change in technology and customer requirement. It is also due to type of industry, life cycle of
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
18
the company, firm-specific problems, timing of the deal and strategic intention and impact of
already existing success stories of mergers and acquisition in testimonials (Stanovich [43]).
It is not like that the merger and acquisition means success for organization only. There are many
other reasons and cases also due to which mergers and acquisition fails. The present study
attempted to develop to provide a workable model for M&As but the study revealed that only 17
percent of financial service firms those merged globally in the past two years could manage to
create good returns (Mohan and Suganthi [32]). Research showed that merger did not lead to
improved performance. The only significant gain to the acquired firm was through an increased
leverage. The analysis further shows that merger did not lead to excess profits for the acquiring
firm (Pawaskar [36]). Poor corporate performance in post-merger period has been attributed to
numerous reasons – manager‘s desire for position and influence, low productivity, poor quality,
reduced commitment, voluntary turnover, and related hidden costs and untapped potential
(Buono [4]).
But then the increasing number of merger and acquisition implies that the positive part of merger
and acquisition is more than that of its negative side. Very revealing of the changing structure
and dynamic of numerous industries is the trend of M&As, which reached great heights in the
last 10 years. The last decade has accounted for 80 percent of all M&As (in terms of their total
transaction value) occurring in the period between 1982 and 2006 (Vizjak [52]).
There are numerous examples that show the mergers and acquisition may be a solution to the
problems that are related with dynamic behavior of supply chain management. Consider the
merger that takes place due to the motive of increasing the value chain of a supply chain in
coffee industry. Coffee growing is a highly fragmented part of the value chain in the coffee
industry (there are around 25 million growers worldwide), coffee roasting is much more
concentrated: three leading coffee roasters (Kraft Foods, Nestle, and Sara Lee) produce 45
percent of global volume. In this strategy formulation process a mere focus on a ―high-level‖
industry concentration process is not enough. An industry‘s value chain should be understood as
a constellation of individual concentration curves (for each part of the value chain) instead of a
single one. Analyzing the value chain (its structure and interrelationships) is also crucial in
decisions about vertical integration or whether to ―make or buy‖ (Kalpic [21]).
There are several reasons for the development of mergers and acquisition including technology
development, risk management and non-conformance cost reduction (Mowery [33], Dodgson
[14]).
Dodgson [14] suggests that there are at least two specific technological dimensions or
considerations for firm collaboration: technological complexity, where the breadth and depth of
expertise required exceeds the capability of an individual firm; and technological uncertainty,
where the risk of pursuing a technological configuration is deemed too high for an individual
firm. Powell [37] suggests mergers and acquisition can be looked for when case efficient,
reliable information is required, further a small firm can become dynamic is alliance with bigger
firm. Anderson and Narus [1] summarized these perspectives by suggesting that the fundamental
reason for the relationship-building activities and efforts is to either add value or reduce cost.
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
19
Consider the case when Tata Steel acquires Corus to improve the value chain for Tata Steel. Tata
had a strong retail and distribution network in India and South East Asia. This would give the
European manufacturer an in-road into the emerging Asian markets. Tata was a major supplier to
the Indian auto industry and the demand for value-added steel products was growing in this
market. Hence there would be a powerful combination of high quality developed and low cost
high growth markets. There would be technology transfer and cross-fertilization of R&D
capabilities between the two companies that specialized in different areas of the value chain.
Another example in which supply chain integration plays a huge role in merger and acquisition
can be illustrated as case of Procter & Gamble (P&G) and Gillette merger. P&G is already the
world's largest consumer products company, which had sales of $ 51.4 billion and Gillette had
sales of $10.3 billion, at the time of acquisition. Merging the two supply chains was a high
priority because it would significantly contribute to P&G's bottom line. The amalgamation, it
was believed, could deliver $1 billion in cost savings and another $750 million in incremental
sales. Despite that complexity, by June 2007 P&G had completed 97 percent of the supply chain
integration. A look at how the company managed this considerable challenge offers some insight
into how very large organizations can combine their operations with minimal disruption.
5. CONCLUSION
The number of mergers and acquisition is growing day by day and the rate has been increasing
for last two decade. It is a same time period in which the concept of supply chain management
came into picture. It has been illustrated that there are various reasons because of which
companies go for mergers and acquisition which are related to the issues in supply chain
management. To deal with dynamic behavior of supply chain, to improve value chain, to get
technological expertise, to cope with competitiveness in era of globalization are some of the
reasons. Hence mergers and acquisition can be considered as tool to deal with the problems that
are related to supply chain management.
BIBLIOGRAPHY
1. Anderson, J. and Narus, J. (1990), ―A model of distributor firm and manufacturer firm
working partnerships‖, Journal of Marketing, Vol. 54, 42--58.
2. Blackhurst, J., Wu, T. and O‘Grady, P. (2005), ―PCDM: a decision support modeling
methodology for supply chain, product and process design decisions‖, Journal of
Operations Management, Vol. 23 (No.s ¾), 325--343.
3. Bozarth, C.C., Warsing, D.P., Flynn, B.B. and Flynn, E.J. (2009), ―The impact of supply
chain complexity on manufacturing plant performance‖, Journal of Operations
Management, Vol. 27 (No. 1), 78--93.
4. Buono, A.F. (2003), ―Seam-less post-merger integration strategies: a cause for concern‖,
Journal of Organizational Change Management, Vol. 16 (No. 1), 90--98.
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
20
5. Choi, T.Y. and Hong, Y. (2002), ―Unveiling the structure of supply networks: case
studies in Honda, Acura, and DaimlerChrysler‖, Journal of Operations Management, Vol.
20 (No. 5), 469--493.
6. Choi, T.Y. and Krause, D.R. (2006), ―The supply base and its complexity: implications
for transaction costs, risks, responsiveness, and innovation‖, Journal of Operations
Management, Vol. 24 (No. 5), 637--652.
7. Christopher, M. (1992). Logistics and Supply Chain Management. Pitman Publishing,
London.
8. Closs, D.J., Jacobs, M.A., Swink, M. and Webb, G.S. (2008), ―Toward a theory of
competencies for the management of product complexity: six case studies‖, Journal of
Operations Management, Vol. 26 (No. 5), 590--610.
9. Collins, T.M. and Doorley, T.L. (1991). Teaming Up for the 1990s. Business One Irwin,
Homewood, IL.
10. Cooper, M.C., Ellram, L.M., Gardner, J.T. and Hanks, A.M. (1992), ―Meshing multiple
alliances‖, Journal of Business Logistics, Vol. 18 (1), 67--88.
11. Craven, D.W., Shipp, S.H. and Craven, K.S. (1993), ―Analysis of co-operative inter-
organizational relationships, strategic alliance formulation, and strategic alliance
effectiveness‖, Journal of Strategic Marketing, Vol. 1.
12. Croom, S., et. al. (2000), ―Supply chain management: an analytical framework for critical
literature review‖, European Journal of Purchasing & Supply Management, Vol. 6, 67—
83.
13. Day, G.S. and Wensley, R. (1988), ―Assessing advantage: a framework for diagnosing
competitive superiority‖, Journal of Marketing, Vol. 52 (No. 2).
14. Dodgson, M. (1991). Technological Collaboration and Organisational Learning: A
Preliminary View of Some Key issues, DRC Discussion Paper, Science Policy Research
Unit, University of Sussex, UK.
15. Dubois, A., Hulthe´n, K. and Pedersen, A. (2004), ―Supply chains and interdependence: a
theoretical analysis‖, Journal of Purchasing & Supply Management, Vol. 10 (No. 1), 3--9.
16. Forrester, J. (1961). Industrial Dynamics. Wiley, New York.
17. Frohlich, M.T. and Westbrook R. (2001), ―Arcs of integration: an integration study of
supply chain strategies‖, Journal of Operations Management, Vol.19 (No. 2), 185--200.
18. Hines, P. (1995), ―Network sourcing: a hybrid approach‖, International Journal of
Purchasing and Materials Management, Vol. 31 (2), 18--25.
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
21
19. Hitt, M.A., Ireland, R.D. and Hoskisson, R.E. (2007), Strategic Management:
Competitiveness and Globalisation Concepts. South-Western, London.
20. Hobbs, J.E. and Young, L.M. (2000), ―Closer vertical co-ordination in agri-food supply
chains: a conceptual framework and some preliminary evidence‖, Supply Chain
Management: An International Journal, Vol. 5 (No. 3), 131--142.
21. Kalpic, B. (2008), ―Why bigger is not always better: the strategic logic of value creation
through M&As‖, Journal of Business Strategy, Vol. 29 (No. 6), 4—13.
22. Kumar, S. and Bansal, L.K. (2008), ―The impact of mergers and acquisitions on
corporate performance in India‖, Management Decision, Vol. 46 (No. 10), 1531—1543.
23. Kwoka, J.E. (Jr.) (2002), ―Mergers and productivity‖, Journal of Economic Literature,
Vol. XL, 540.
24. Lamming, R.C. (1993). Beyond Partnership: Strategies for Innovation and Lean Supply.
Prentice-Hall, Hemel Hempstead.
25. Lamming, R.C. (1996), ―Squaring lean supply with supply chain management: lean
production and work organization‖, International Journal of Operations and Production
Management, Vol. 16 (2), 183--197.
26. Lee, H.L. and Ng, S.M. (1997), ―Introduction to the special issue on global supply chain
management‖, Production and Operations Management, Vol. 6 (3), 191--192.
27. Lee, H.L., Padmanabhan, V. and Whang, S. (1997), ―The bullwhip effect in supply
chains‖, Sloan Management Review, Vol. 38 (3), 93--102.
28. Lewis, J.C., Naim, M.M. and Towill, D.R. (1997), ―An integrated approach to re-
engineering material and logistics control‖, International Journal of Physical Distribution
and Logistics Management, Vol. 27 (3), 197--209.
29. Lichtenberg, F.R. and Siegel, D. (1987), ―Productivity and changes in ownership of
manufacturing plants‖, Brookings Papers on Economic Activity, p. 643.
30. Macbeth, D.K., Ferguson, N. and Neil, G. (1992). Developing Customer Supplier
Relationships, First PSERG Conference, Glasgow.
31. Mentzer, J.T., DeWitt, W., Keebler, J.S., Min, S., Nix, N.W., Smith, C.D. and Zacharia,
Z.G. (2001), ―Defining supply chain management‖, Journal of Business Logistics, Vol.
22 (No. 2), 1--25.
32. Mohan, S.M. and Suganthi, L. (2001), ―B2B mergers in the new economy‖, Indian
Management Magazine, Vol. 3, 44--55.
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
22
33. Mowery, D.C. (Ed.) (1988). International Collaborative Ventures in US Manufacturing,
Ballinger, Cambridge, MA.
34. Nassimbeni, G. (1998), ―Network structures and co-ordination mechanisms: a
taxonomy‖, International Journal of Operations and Production Management, Vol. 18 (6),
538--554.
35. New, S. J., & Payne, P. (1995). Research frameworks in logistics: three models, seven
dinners and a survey. International Journal of Physical Distribution and Logistics
Management, 25 (10), 60–77.
36. Pawaskar, V. (2001), ―Effects of mergers on corporate performance in India‖, Vikalpa,
Vol. 26 (No. 1), 19--32.
37. Powell, W.W. (1990), ―Neither market nor hierarchy‖, Research in Organizational
Behavior, Vol. 12, 295--336.
38. Rangan, V.K., Corey, E.R. and Cespedes, F. (1993), ―Transaction cost theory: inferences
from clinical field research on downstream vertical integration‖, Organization Science,
Vol. 4 (No. 3), 454--477.
39. Saunders, M.J. (1995). Chains, Pipelines, Networks and Value Stream: The Role, Nature
and Value of such Metaphors in Forming Perceptions of the Task of Purchasing and
Supply Management. First Worldwide Research Symposium on Purchasing and Supply
Chain Management, Tempe, Arizona, pp. 476--485.
40. Saunders, M.J. (1998). The Comparative Analysis of Supply Chains and Implications for
the Development of Strategies. Seventh International IPSERA Conference, London, pp.
469--477.
41. Sivadasan, S., Efstathiou, J., Calinescu, A. and Huaccho, H.L. (2006), ―Advances on
measuring the operational complexity of supplier-customer systems‖, European Journal
of Operational Research, Vol. 171 (No. 1), 208--226.
42. Sivadasan, S., Efstathiou, J., Frizelle, G., Shirazi, R. and Calinescu, A. (2002), ―An
information-theoretic methodology for measuring the operational complexity of supplier-
customer systems‖, International Journal of Operations and Production Management,
Vol. 22 (No. 1), 80--102.
43. Stanovich, K.E. (1998). How to Think Straight About Psychology. In: Addison Wesley
Longman, New York.
44. Sterman, J.D. (1989), ―Modelling managerial behavior: misperceptions of feedback in a
dynamic decision making experiment‖, Management Science, Vol. 35 (3).
ZENITH
International Journal of Multidisciplinary Research
Vol.2 Issue 10, October 2012, ISSN 2231 5780
ww
w.z
enit
hre
sear
ch.o
rg.in
3
23
45. Stock, G.N., Greis, N.P. and Kasarda, J.D. (2000), ―Enterprise logistics and supply chain
structure: the role of fit‖, Journal of Operations Management, Vol. 18 (No. 5), pp. 531--
547.
46. Stonebraker, P.W. and Liao, J. W. (2006), ―Supply chain integration: exploring product
and environmental contingencies‖, Supply Chain Management: An International Journal,
Vol. 11 (No. 1), 34--43.
47. Tan, K.C., Kannan, V.R. and Handeld, R.B. (1998), ―Supply chain management: supplier
performance and firm performance‖, International Journal of Purchasing and Material
Management, Vol. 34 (3), 2--9.
48. Towill, D.R. and Naim, M.M. (1992), ―Industrial dynamics simulation models in the
design of supply chains‖, International Journal of Physical Distribution and Logistics
Management, Vol. 22 (5), 3--12.
49. van Ackere, A., Larsen, E.R. and Morecroft, J.D.W. (1993), ―Systems thinking and
business process redesign: an application to the beer game‖, European Management
Journal, Vol. 11 (4).
50. van Wegberg, M. (1994). ―Why do Mergers Occur in Waves? Business Cycles,
Bandwagons and the Merger for Market Power Paradox.‖ METEOR Discussion Paper.
51. Vasilaki, A. and O‘Regan, N. (2008), ―Enhancing post-acquisition organisational
performance: the role of the top management team‖, Team Performance Management,
Vol. 14 (No.s ¾), 134--145.
52. Vizjak, A. (2008), Competing Against Scale: The Growth Cube for Scale-based
Competition, GV Publishing.
53. Walter, G.A. and Barney, J.B. (1990), ―Management objectives in mergers and
acquisitions‖, Strategic Management Journal, Vol. 11, 79—86.
54. Weston, J.F. and Weaver, S.C. (2001). Mergers and Acquisitions. McGraw-Hill, New
York.
55. Wise, R. and Baumgartner, P. (1999), ―Go downstream the new profit imperative in
manufacturing‖, Harvard Business Review, September-October, pp. 133--141.