1987-2015 · The Buzon pedestal incorporates a patented slope-correcting device, which compensates...
Transcript of 1987-2015 · The Buzon pedestal incorporates a patented slope-correcting device, which compensates...
21987-2015
828
The award-winning Buzon Pedestal appeals to architects and builders when it comes to the design and construction of raised floors. It can be used with pavers, timber decking and steel grating to create raised floors on balconies, terraces, green roofs, temporary floors and water features. Capable of accommodating heights from 17mm-1070mm, it can conceal services and offer easy access for maintenance of waterproof membranes. The Buzon pedestal incorporates a patented slope-correcting device, which compensates for a substrate fall of 0-5%, to provide a perfectly level floor finish. The interchangeable spacer tabs allow for 2mm, 3mm, 4.5mm, 6mm, 8mm and 10mm gaps between pavers, providing positive drainage and making uneven paving lines a thing of the past.Designed, manufactured and tested in Belgium, the Buzon pedestal is capable of supporting up to 1,000kg. Used on projects all over the world, the applications of the Buzon pedestal are endless.
Available with tab widths of 2, 4.5, 6, 8 and 10mm
25mm
Available with tab widths of 3 and 4.5mm
17mm
Adjustable Joist / Batten HolderSupport for all types of joist or battens:
· Timber batten or joists· Composite timber battens or joists.· Aluminium / steel sections
Adjustable from 35 – 90mm with holes on the sides for a mechanical �xing.
0mm50mm
100mm150mm200mm250mm300mm350mm400mm450mm500mm550mm600mm650mm700mm750mm800mm850mm900mm950mm
1000mm1050mm
DPH-235-53mm
DPH-350-78mm
DPH-475-108mm
DPH-5100-175mm
DPH-6175-285mm
DPH-7285-400mm
DPH-8355-515mm
DPH-9465-625mm
DPH-10545-740mm
DPH-11645-850mm
DPH-12720-960mm
DPH-13830-1070mm
DPH-017mm
DPH-128mm
DPH-0225-36mm
DPH Series Pedestal Sizing Chart - Adjustable from 17mm to 1070mm
DPH-0+
PH5=
27mm
DPH-1+
PH5=
38mm
DPH-02+
PH5=
35-46mm
DPH-2+
PH5=
45-63mm
DPH-3+
PH5=
60-88mm
C2 COUPLER: For heights > 170mm
C5 COUPLER: For heights > 285mm
Designed & manufactured in BelgiumMade from 5mm thick 80% recycled polypropylene2, 3, 4.5, 6, 8 & 10mm Paver Spacer TabsAdjustable heights from 17mm to 1070mmUV stable & chemical resistantProvision for mechanical fixing if requiredInbuilt safety locking mechanismMillimetric adjustment
Provides a sustainable solutionEasy access to waterproofing membraneAllows for positive drainage & air ventilationReduces sound transmission & increases temparature insulationAbility to conceal services (i.e. plumbing, electrical etc)
Compensates for 0-5% fallWill support up to 1000Kg to a height of 1070mmQuick & easy installationReduces weigh loading by eliminating sand & cement mortar beds
NSW DistributorAusdrainSuite 10, 2 - 4 Bells AveCammeray NSW 2062Tel: (02) 9929 7650Fax: (02) 9929 7655
WA DistributorCivil & General Distributors27 Oxleigh DriveMalaga, WA 6090Tel: (08) 9249 4733Fax: (08) 9209 1220