Advanced Configuration

195Eg

Ethernet Wired LAN

• 38,400,N,8,1 • RJ-45 Connector (RS-232)• Terminal Window (HyperTerminal, ESTeem Utility, Putty, TerrTerm, etc)

Serial Port Access

• admin

Default Username and Password

Set IP Address for Web Interface

View Device and System Log Files

Ping Host device from Modem

RS-232 Programming Port

• Invalid Input will Kill Operation• Requests in Manual or from Customer Support

Only Experienced Users

Direct Access to All Modem Variables

• Modem_ID• Diversity Antenna Configuration• Maximum Distance Settings

Specific Settings in Manual

Advanced Menu

195E Antenna Selection

Single External Antenna

• Antenna in Port A• Cap over Port B

Antenna Selection in Advanced WLAN_0

• CurrentRXAntenna• Value of 0 = Both Antenna• Value of 1 = Port A• Value of 2 = Port B

**195Ed can Transmit and Receive Both Ports

Model 195E with Dish/Panel Antennas

• Very High Gain Antennas < 21dBi• Distances Greater Than 13 Miles @ 54 Mbps• Factory Default Set to 10 Miles

Distances Over 10 Miles

• Adjustment of Timing Value• Set Maximum Range in Advanced Configuration• Distance Set in Miles – set to per link distance not round trip

Long Distance Links

Model 195E with Dish/Panel Antennas

• Very High Gain Antennas < 21dBi• Distances Greater Than 13 Miles @ 54 Mbps• Factory Default Set to 10 Miles

Distances Over 10 Miles

• Adjustment of Timing Value• Set Maximum Range in Advanced Configuration• Distance Set in Miles – set to per link distance not round trip

Long Distance Links

Modem ID

• Identify each modem for own purposes (i.e Main street)• Manual set or use ENC

Remote Syslog Configuration

• Linux based Syslog or Windows available downloads

Set System Time

• Real time clock• Time server configuration

Global Settings

Global Settings

Antenna Selection

• Dual Diversity

Max Distance Settings

Operating Rates

• RF Datarate

Output Power Levels

Enable Transmitter

• SWR measurement• 10 second transmit

Wireless LAN Settings

Wireless LAN Settings

Wireless LAN Settings

Static Route Table

• Configure when network router is unavailable

Bridge Variables

• Spanning tree enabled/disabled

Root Bridge

• Configuration of multiple root bridges• Redundant root bridges• Redundant master locations

Routes and Bridge Variables

Bridge Variables

Saving Configuration

• Select Backup from Main Menu• Save to FTP Site• Save to File on Computer

Restoring Configuration

• Restore Factory Defaults• Restore Last Configuration

• Removes Any uncommitted Changes made to configuration • Restore From File

• Restores a backup configuration file from FTP or Local File

Saving and Restoring Configuration

Saving and Restoring Configuration

• Restore Factory Defaults• Restore Last Configuration

• Removes Any uncommitted Changes made to configuration

• Restore From File• Restores a backup configuration file from FTP or

Local File

Restoring Configuration

Updates OS to include bug fixes and new features

• Images files are specific to model

Firmware Updates

• Local or Internet FTP Site• File Saved on Computer

Select Software Update

• Main Menu• Select File for Update

Can be done over the air or local

Updating Firmware

Updating Firmware

Updating Firmware