1930 - PD Pumps | PCM
10
RENÉ MOINEAU René MOINEAU, born in 1887, was awarded a science diploma in Nancy. Manager of the research office at Breguet, he became a test pilot and participated in major airplane and hydroplane events. With this competitive spirit, he tried to surcharge his engine with a compressor, and that is how he invented the principle of the “progressive cavity” and the original geometry of the eccentric screw pump which was patented in 1930. The brilliant idea required capital and this is where Robert BIENAIMÉ, engineer from the Ecole Centrale de Paris, former aviator and former director of the GÉVELOT Group became involved in the birth of the PCM Group. First PCM pump The first “MOINEAU™” pump was made of cardboard by Mr. René MOINEAU and shown at the Inventors’ Exhibition (LEPINE competition). The rotor was made up of slices of cardboard glued to each other. ROBERT BIENAIMÉ President of PCM 1932-1940 Robert BIENAIMÉ 1930
Transcript of 1930 - PD Pumps | PCM
RENÉ MOINEAU
René MOINEAU, born in 1887, was awarded a science diploma in Nancy. Manager of the research office at Breguet, he became a test pilot and participated in
major airplane and hydroplane events.
With this competitive spirit, he tried to surcharge his engine with a compressor, and that is how he invented the principle of the “progressive cavity” and the original geometry of the eccentric screw
pump which was patented in 1930.
The brilliant idea required capital and this is where Robert BIENAIMÉ,
engineer from the Ecole Centrale de Paris, former aviator and former director
of the GÉVELOT Group became involved in the birth of the PCM Group.
First PCM pump
The first “MOINEAU™” pump was made of cardboard by Mr. René MOINEAU and shown at the Inventors’ Exhibition (LEPINE competition).
The rotor was made up of slices of cardboard glued to each other.
ROBERT BIENAIMÉ
President of PCM1932-1940
Robert BIENAIMÉ
1930
René MOINEAU and Robert BIENAIMÉ found the “Pompes Compresseurs Mécaniques” company established in Vanves in a small building with three adjacent workshops.
The research and manufacturing of pumps began thanks to tooling produced on site and by modifying second-hand lathes. A workshop for the fabrication of rubber stators was also created.
Starting in 1946, René MOINEAU, upon his return from a trip to the USA, decided to modernize the workshops. The company then grew steadily, the stator fabrication workshop expanded and new presses were ordered.
The GÉVELOT company acquired the Belgian “la Métallurgie Franco-Belge” company in Issy-les-
Moulineaux and decided to integrate PCM within a new entity, La SOCIETE DE MECANIQUE ET DE
METALLURGIE (SGMM).
The GÉVELOT company also established a new factory to increase its brass production, S.A.
FONDERIES ET LAMINOIRS D’ANJOU (FLA) on a 29,000 square meter plot in Champtocé-sur-Loire,
which would also be integrated into SGMM.
First production workshop in Vanves
PCM building in Vanves
First PCM advertisement
Customer references
1946
19331938
PCMPOMPES
COMPRESSEURS MÉCANIQUES
1932
The first pumps were presented at the Paris Fair
President of PCM1940-1960
Jacques BIENAIMÉ
Founding of
The effects of the lack of space were felt. PCM extended its production unit into new workshops in Vanves and set up a large functional warehouse, an assembly workshop for longer pumps, and a new paint booth while at the same time expanding the rubber workshop.
Beginning in 1970, the space freed by the workshops transferred to Champtocé- sur-Loire permitted the construction of an office building in Vanves in which PCM occupied the first two floors.
A first step consisted in decentralizing the stator fabrication workshop in the month of May 1972 followed by the warehouse, assembly, and paint booths in April 1973.
1975
13 people in Champtocé-sur-Loire
1960
PCM IN CHAMPTOCÉ
In Vanves, the urban plan evolved whereas at Champtocé-sur-Loire the FLA company
encountered difficulties. PCM sought space to expand and the workshops were then
transferred to the FLA factory in Maine-et-Loire.
President of PCM1964-1974
Jacques FOUGERAY DU COUDREY
“Interchimie” Trade Show in Paris in 1974
Research office
1970
PCM acquired the PRECI-POMPE company (located in St. Denis) which is transferred to Vanves.
The prototype testing department was transferred to Champtocé-sur-Loire due to a lack of space, and the laboratory was to follow the next year.
Launch of the RODEMIP shaft pump driven by a surface motor
for deep oil applications.
1979
1986
1983
The beginning of this decade was essentially focused on investments for the Champtocé-sur-Loire factory.
1981Launch of IVA/LVA hopper pumps
THE BEGINNINGS OF
OIL & GASPCM formed an alliance with the IFP (French Oil Institute) and
created EMIP (Entreprise Moineau Institut—Moineau Business Institute) in order to develop the progressive cavity pump (PCP)
for oil production.
President of PCM1975-1988
Philippe DUROUCHOUX
Merger of PCM and PRECI-POMPE
1987
250 people
Rodemip oil line
Advertising insert which appeared in the l’Usine Nouvelle (“New Factory”) magazine
Pollutec Exhibition in 1982
1982
PCM took its first steps toward information technology and acquired two computers: one for inventory management and the other for managing accounting.
Injection press acquired in 1981
SGMM (S.A.) became PCM POMPES.
The Vanves factory was closed definitively. The means of production were transferred to Champtocé-sur-Loire where the purchase of new lands permitted the expansion of facilities and the gathering of all the production units in one location (including the Preci-Pompe production unit).
- With our agent in ENGLAND which resulted in the creation of PCM Pumps Limited.
- With the DELASCO agency in Germany which resulted in the creation of PCM Delasco GmbH.
To ensure development for export, management decided to take a stake in foreign companies:
1992
1989
1991
The research office was modernized and equipped with the first CAD (Computer Aided Drawing) workstations.
THE INDUSTRIALERAOver the course of 10 years, under the leadership of Paolo MARTIGNONI and Philippe DESTOURS, the company equipped itself with high performance tools while massively increasing the floorspace of its production facilities in Champtocé-sur-Loire (from 4,000 to 13,000 square meters).
President of PCM1989-2000
Philippe DESTOURS
PCM decided to expand its volumetric pump line and became a majority shareholder in the DELASCO™ company.
In 1992 the gathering of all the production units of PCM Pompes into one site was completed. A building was built to house Delasco™ and Preci-pompe.
- Suction - - Transfer - - Discharge -
Champtocé-sur-Loire Site
In October 1993, on the occasion of the Pollutec exhibition, PCM Pompes launched a new line of dry membrane electromechanical measuring pumps:
The “Lagoa” line was born.PCM established an oil sales department,
PCM MOINEAU OILFIELD product division.
PCM developed its oil business in Venezuela with its distributor Equimavenca.
A cooperation agreement was signed on April 15, 1993 in which PCM Pompes took a 45% share in the KUDU company.
19931996
Dosys™ products began to be sold.
In March 1994, the management of PCM Pompes decided to fully merge Delasco™ into the company.
PCM became the first shareholder of PCM Pumps (GB).
1994
265 people
Dosys™ Food System
PCM FROM PUMPS TO PROCESS
PCM Pompes announced the purchase of the Dosys™ company located in Rambouillet and decided to refine its logo.
USA : PCM USA Inc. in 2001China : PCM Trading Shanghai Co Ltd in 2002Tunisia : PCM Tunisia in 2003UK : PCM Group UK Ltd in 2004
PCM launched its first internet site in 1997.2001
2003 1997
2004
+4 entities
PCM ABROADWith the opening of PCM in Houston and of PCM in Shanghai, the first foundations of future clusters were laid.
PCM extended its Delasco™ peristaltic line
Launch of the H pump
GBB Moineau™ pump
Compact Pump
PCM innovated and launched numerous new items some of which would become true Bestsellers.
Oil & G
as
FoodIndustr
y
PCM Toika™:stay productive
under pressure Do your wells produce high pressure, multiphase fluids?
To avoid costly in-field fluid separation, use PCM Troika™. It pumps multiphase liquids with all the advantages of PCP – steady performance, non-pulsating flow and zero emulsion.
PCM Troika is perfectly suited to rapidly changing gas-to-oil ratios and pressure levels. It can handle virtually any mix of oil, gas, water and sand, including degassing fluids, high sand cuts and sour environments.
So if other pumps cannot reliably handle your well’s multiphase fluids, it is time to go with PCM Troika.
www.pcm.eu
Que serait l'industriesans fluides ?
La complexité des process industriels et les exigences techniquesdes secteurs de pointe, requièrent une fiabilité totale des systèmes de gestiondes fluides. Pour l’industrie, PCM relève un défi majeur : fournir des solutionsde pompage qui maintiennent en mouvement les fluides vitaux dansdes environnements complexes. Abrasif, fragile, visqueux, corrosif, chaudou dense, chaque fluide nécessite une approche spécifique. Et parce qu’ilssont aussi un élément vital de votre entreprise, PCM, à vos côtés depuis 70 ans,développe sans relâche des pompes, systèmes de dosage et technologiesinnovantes de dynamique des fluides.
www.pcm.eu
Février2007
Annonce_industry_60x80FR.qxd 22/02/07 12:31 Page 1
The PCM logo was modernized and got a new slogan,
“keep it moving”.
Launch of the EcoMoineau™ M pump, the first pump to be ecologically designed. It combined the performance and reliability of eccentric screw pump technology with a modular and ecological design.
Sudan : PCM Sudan BranchU.A.E. : PCM Dubaï Branch OfficeThaïland : PCM Thailand
Representative Office
Russia : PCM RussiaCongo : PCM Congo
PCM Vulcain™Commercial launch of the PCM Vulcain™ pump for assisted thermal recovery from hydrocarbons on which PCM engineers had worked for more than ten years in total secrecy.
Launch of the latest generation Dosymix™ mixer
Launch of the PCM Troika
transfer pump
2006
2007
+2 entities
+3 entities
352 people
President of PCM2001-2012
Jacques FAY
PCM KEEP IT MOVING PCM develops its reputation throughout the world thanks to innovation and marketing.
Creation of the Business Units (SBU)
The Dosys™ company was merged into PCM.
2005
China : PCM Suzhou Co LtdItaly : PCM Group Italia Srl
The Champtocé-sur-Loire site gained 1400 square meters of workshops and 1000 square meters of additional offices. The total surface area reached 16,300 square meters and permitted the doubling of PCM Vulcain™ pump production.
PCM launched the PCM Moineau™ HR
groundhole pump that enabled pushing back
the natural limits of conventional PCPs.
2008
404 people
2012
Colombia : PCM Colombia S.A.S.
+1 entity
468 people
2010
Canada : PCM Canada Inc.Oman : PCM Muscat LLC +2 entities
A new pump for the food processing industry: Quality, safety, efficiency are the three ingredients used by PCM to create its new HyCare™ eccentric screw pump.
Launch of PCM FieldTrack software
PCM CONTINUES ITS EXPANSION The historical headquarters in Vanves was tranferred to Levallois-Perret where it joined the headquarters of the Gévelot group.
PCM was organized into geographical centers to be agile and responsive throughout its global markets.
LNA(Latin & North America)
OIL & GAS FOOD INDUSTRY
ERWA(Europe, Russia & West Africa)
GME(Great Middle East)
AP(Asia Pacific)
4 Géopôles :
3 SBU :
LNA(Latin & North America)
OIL & GAS FOOD INDUSTRY
ERWA(Europe, Russia & West Africa)
GME(Great Middle East)
AP(Asia Pacific)
4 Géopôles :
3 SBU :
2009
Launch of the DACC measuring pump to equip all dosage and filling systems.
Launch of the new EcoMoineau™ C eco-designed pump.
+2 entities
PCM Suzhou Co Ltd
New range of PCM Moineau™ A pumps for transfer to surface in the oil industry.
27 entities in worldwide
BUILDING AN INTERNATIONAL GROUP
As breaking into global markets became more complex, the PCM organization evolved to deal with strong international growth of the Group’s business in the past
six years. In 2014, PCM S.A. became the Group’s holding company.
Chile : PCM Chile SpAAustralia : PCM Australia PtyLtdKazakhstan : LLP PCM Kazakhstan
2014
20132015
+3 entities
592 people
Korea : PCM Korea Representative OfficeMalaysia : PCM Malaysia Representative Office
Singapore : PCM Group Asia Pacific Pte LtdSudan : PCM South Sudan BranchFrance : PCM Europe S.A.S., PCM Technologies S.A.S., PCM Manufacturing France S.A.S.
+2 entités
+5 entities
Case management: By field By well
Pump performance: Theorical Test bench results In-well evaluationResults:
Operating conditions Centralizers distribution Graphical views
Complete reporting: PDF-Excel format From summarized to detailed
Well data input &Equipment selection
Construction of a 1200 m2 extension in Champtocé-sur-Loire
Launch of PCM Design software
PCM resold Kudu and acquired 75% of the share of the Amik Oilfield company in Canada.
President of PCMSince 2012
Mario MARTIGNONI
541 people 38 nationalities
PCM developsspecialized transfer
pumps for the Oil & Gas industry.
From visionary pioneer to global supplier of
fluid pumping solutions for tomorrow’s markets.
Food systemsPCM supplies equipment
to the major players in agri-food worldwide.
2016
Installation of the first PCM driveheads in China, Sudan, Russia & Congo
