190-982

Administering IBM Lotus Quickr 8.1 Services for IBM WebSphere Portal

Version 1.0

QUESTION NO: 1 The Departmental/Express installation uses a predefined user ID, along with the password you enter, to configure DB2 and create an account on the local system. What is the default name on this account?

A. wpdb2ins B. wasadmin C. db2admin D. quickradmin

Answer: A

QUESTION NO: 2 Which of the following is NOT required to be running when starting the Lotus Quickr server?

A. Database B. Local security host C. An administrative console D. WebSphere Application Server

Answer: B

QUESTION NO: 3 In which of the following locations does Lotus Quickr store users and groups that exist in the user registry?

A. As entries in the local wmm.xml B. As entries in the portal database C. As entries in the WSAdmin group in your LDAP source D. As entries in the QuickrMember group in your LDAP source

Answer: B

QUESTION NO: 4 Which of the following is the virtual resource root node of all resources in the release domain?

A. Portal B. Markups C. Web modules D. Content node

Answer: A

QUESTION NO: 5 Terrance has successfully created a Web SSO configuration document to integrate his Lotus Domino domain with the WebSphere Application server running Lotus Quickr. Even after replicating the document to all the other Lotus Domino servers in that domain, however, he is unable to successfully pass authentication across the servers. Which of the following is the cause for this issue?

A. All servers are part of the same DNS domain B. All the servers are connected to the same LDAP source C. The WebSphere Application Server was used to export the LTPA token into Lotus Domino D. Enabling multi-server authentication must be done individually for every Lotus Domino server

Answer: D

QUESTION NO: 6

Which of the following is a set of conditional statements that enables a resource to be evaluated so that specified actions can be applied to the resource automatically?

A. Policy rule B. Policy state C. Policy condition D. Policy container

Answer: A

QUESTION NO: 7 The Administrator@Portal role contains a special permission that allows the Administrator to make arbitrary changes to the access control configuration of all resources. The Administrator can also create and delete roles, role assignments, and role blocks. Which of the following roles is also allowed this ability?

A. User Manager B. Policy Administrator C. Security Administrator D. WebSphere Member Manager

Answer: C

QUESTION NO: 8 The Credential Vault stores credentials that allow portlets to log in to applications outside the realm on behalf of the user. Which of the following credentials allows you to establish connections via Basic Authentication, Lightweight Third Party Authentication (LTPA) token authentication, or simple form-based user ID/password login challenges?

A. Active B. Logged C. Passive D. Embedded

Answer: A

QUESTION NO: 9 Which of the following allows you to group users from one or more LDAP trees of one user registry and expose them as a coherent user population to Lotus Quickr?

A. Realm B. Domain C. Territory D. Community

Answer: A

QUESTION NO: 10 Bill needs to make some changes to the current policies for his Lotus Quickr environment. In which of the following locations will he work with policy types for portal resources?

A. Quickr Layout portlet B. Composite Policy portlet C. Resource Policies portlet D. Policy Principles portlet

Answer: C

QUESTION NO: 11 A main policy for a portal resource provides settings for the resource if which of the following is true?

A. The resource is newly created B. The resource has no administrator defined C. There are no child policies for the resource D. The policy is listed at the top of the hierarchy

Answer: C

QUESTION NO: 12 Single sign-on is configured through the use of an LTPA token. Vernon has specified a timeout of 30 minutes for LTPA in his environment. In which of the following places is this setting located?

A. Web services B. Security policies C. Resource policies D. Authentication mechanisms

Answer: D

QUESTION NO: 13 To enable communication between a Web server and the WebSphere Application Server for Lotus Quickr, which of the following is required?

A. Web server plug-in B. DB2 administration account C. Local qpconfig.xml file on the Web server D. Identical wpconfig.properties files on both servers

Answer: A

QUESTION NO: 14 A user account in Lotus Quickr for WebSphere Portal requires specific fields for an account to be created. Which of the following is NOT a required value?

A. User ID B. Last name C. First name D. Common name

Answer: D

QUESTION NO: 15 Which of the following components, when properly installed, monitor what product offerings and their versions, releases, modifications, and fix packs are installed and used on a system?

A. IBM DB2 Software Assurance Manager B. WebSphere Member and Version Manager C. Lotus Quickr Product Release Manager D. IBM Tivoli License Compliance Manager

Answer: D

QUESTION NO: 16

Your organization wishes to view attachments in the Lotus Quickr library as simple Web pages without having to launch the local application on the user workstation. Which of the following Lotus Quickr services offers this capability?

A. File Opening Services B. HTML Rendering Services C. Attachment Viewing Services D. Document Conversion Services

Answer: D

QUESTION NO: 17 While viewing a person through the People Finder, Bart finds that the Organization View in the Profile page does not display properly. He notifies the system administrators for the Lotus Quickr system. Which of the following steps should they take to verify that the value displays properly?

A. The administrator should verify that the Manager attribute utilizes the DistinguishedName B. The administrator should update the CSEnvironment.properties file to include the Manager attribute C. The administrator should check to verify that the LDAP source has been configured for access over SSL D. The administrator should configure the Finder portlet to show only users who have a Manager attribute specified

Answer: A

QUESTION NO: 18 Manuel has made numerous changes to the People Finder portlet and wishes to reset it to its original layout. He has restored it by selecting Configure from the portlet drop-down menu, and under XML Configuration, by clicking Reload Settings. In which of the following locations are the People Finder configuration settings stored?

A. qpconfig.xml B. apPDirConfig.xml C. peoplefinder.config D. CSEnvironment.properties

Answer: B

QUESTION NO: 19 To support Portal Search in a clustered architecture, the search service should be installed in which of the following?

A. Locally B. Remotely C. On each node D. On the Web server

Answer: B

QUESTION NO: 20 Portlets in your environment that display users' names with online awareness do not display the correct online status for similar names. For example, the users John Williams and John Willamson have this issue. Which of the following files must have attributes defined to the watch lists for awareness?

A. wmm.xml B. qpconfig.xml C. STAwareness.config

D. CSEnvironment.properties

Answer: D

QUESTION NO: 21 Users are receiving the following error while clicking a link in a specific Lotus Quickr library: "Access to remote server www.quickrserver.com has not been granted. Please contact your system administrator." Which of the following best describes the reason for this error?

A. The domain is a Resource Environment Provider only B. The domain is not listed in QuickrWhitelistProvider C. The domain is not an exact match for the linked content D. The domain is not in the local single sign-on domain for the LTPA token

Answer: B

QUESTION NO: 22 Miguel has performed administrative actions in his company's Lotus Quickr environment. In which of the following are these changes available to Miguel and all other users?

A. Immediately for Miguel and all users B. Miguel and all other users must log out and back in C. Immediately for all other users, but Miguel must log out and back in D. Immediately for Miguel, and all other users must log out and back in

Answer: D

QUESTION NO: 23 Lotus Quickr has the ability to be installed on a single server or in a cluster. Which of the following is NOT a single-server installation option?

A. Developmental B. Departmental/Express C. Advanced Single Server D. Advanced Enterprise Cluster

Answer: D

QUESTION NO: 24 You must install and configure Lotus Quickr separately on each node when preparing a clustered environment. How many Lotus Quickr clusters are permitted per cell?

A. One B. Two C. Four D. Six

Answer: A

QUESTION NO: 25 When users are searching through your Lotus Quickr environment, they are being presented with the three most salient sentences of the original documents in the results. Which of the following services provides this functionality?

A. Facets B. Taxonomy

C. Summarizer D. Language support

Answer: C

QUESTION NO: 26 Abby is uploading files from her computer to the Lotus Quickr library. By default, in which of the following locations are uploaded files placed?

A. The top level of the library B. The root of the Discussion folder C. A view created by her username in the place D. The same level as the welcome area for the place

Answer: A

QUESTION NO: 27 Eddie is attempting to modify the ability to view unpublished documents in the Competitive Summary place. He cannot view the place options. Which of the following place rights must he be assigned to perform this function?

A. Editor B. Manager C. Modifier D. Designer

Answer: B

QUESTION NO: 28 Lotus Quickr is installed as an enterprise application server within the WebSphere Application Server infrastructure. In WebSphere Application Server, a cluster is composed of which of the following?

A. Lotus Quickr servers that are individually configured B. Multiple identical copies of an application server C. Multiple profiles running Lotus Quickr as applications D. Servers not controlled by a network deployment manager

Answer: B

QUESTION NO: 29 Once Lotus Quickr for WebSphere Portal has been correctly installed, the portal can be assigned a custom URL for administration. The default URL and port number that portal will utilize is which of the following?

A. http://hostname.example.com:8080/lotus/quickr B. http://hostname.example.com:10038/lotus/quickr C. http://hostname.example.com:30108/lotus/quickr D. http://hostname.example.com:88088/lotus/quickr

Answer: B

QUESTION NO: 30 Yaphett wishes to configure the Lotus Quickr server to be available to Google searches. Which of the following pages will be available to this search service?

A. Public portal pages only

B. Any pages listed in the submitted site map C. Pages found at the URL provided to the search service D. Pages that are accessible using the local WebSphere Member Manager extension

Answer: A

QUESTION NO: 31 You initially configured the Search and Browse portlet for local search service. Your organization now wishes to establish a remote search service. Which of the following steps must you follow to make this configuration change?

A. You must remove the current local search EJB and replace it with the remote search EJB B. You must configure the portlet SOAP_URL parameter to associate with the remote server URL C. You must enter the Manage Search portlet and modify the search collection to include all nodes D. You must manually create a copy of the current portlet and configure it for the new search type

Answer: C

QUESTION NO: 32 Lisa has built a taxonomy for her Portal Search portlet that contains product name categories for all of the products her company manufactures. Some documents submitted do not show as part of the category for their respective products. Which of the following best explains the reason these documents do not categorize properly?

A. The product names in the document are not proper case B. The score on the document is less than the MinUseCatScore C. The number of occurrences of the product name exceeds the MaxCatUsage parameter D. The users are not selecting the proper portal categories when creating the documents

Answer: B

QUESTION NO: 33 To use the feature Enable sending e-mail to new members for composite application communities, you must configure which of the following in the administrative console ?

A. MailSend B. MailMember C. QuickrMail D. MailService

Answer: D

QUESTION NO: 34 You have configured multiple instances of Lotus Quickr on a single WebSphere Application Server. To configure each, you must access Lotus Quickr via a Web browser to a fully qualified domain name, followed by the port. Which of the following is the default transport port that is created by WebSphere Application Server?

A. 80 B. 8088 C. 10038 D. 18808

Answer: C

QUESTION NO: 35

Vince has configured People Awareness in Lotus Quickr for WebSphere Portal. When users click a person link, the Person menu displays a set of contact information about the selected person, such as his or her telephone number. In which of the following locations is the information configured?

A. wsawareness.pref B. qpconfig.properties C. membermgr.preferences D. CSEnvironment.properties

Answer: D

QUESTION NO: 36 The DefaultCollectionsDirectory on your remote search service server is a required field. When there is no specified value for this setting, in which of the following is the default location?

A. was_server_root/bin/search B. quickr_server_root/searches C. quickr_server_root/collections D. was_server_root/profiles/quickr/cache

Answer: C

QUESTION NO: 37 If you are planning to install Lotus Quickr and the deployment manager for cluster management on the same machine, which of the following is the preferred approach to this type of installation?

A. Create separate profiles B. Install into the same profile C. Create multiple Lotus Quickr servers per cell D. Create multiple WebSphere Application Server engines

Answer: A

QUESTION NO: 38 Users have recently begun to see summaries for Web site pages that they are not authorized to view. They are using the same Search and Browse portlet as they did before the summaries started appearing. Which of the following best represents the changes that were made to allow them to see the restricted Web site content?

A. The Lotus Quickr server is enabled for single sign-on with the Web server B. The users are accessing the document collections anonymously and not through authentication C. The users are building personal indexes of the Web pages to show in their search portlet results D. The rights to a search collection are allowing the Search and Browse portlet to see the information

Answer: D

QUESTION NO: 39 You have configured your Lotus Quickr environment for integration with Lotus Sametime. Once the Lotus Quickr server is configured to recognize the Lotus Sametime server, the Chat command is supported by an applet with which of the following names?

A. QPLink B. STLinks C. STAware D. QPAware

Answer: B

QUESTION NO: 40 Searching for users or groups is consuming a lot of time at the ACME Corporation. To prevent this behavior, you can set limits on searches for users or groups. In which of the following locations are search limits defined?

A. wmm.xml B. qpconfig.xml C. search.properties D. CSEnvironment.properties

Answer: A

QUESTION NO: 41 Henry has enabled navigation by category in the library settings. Which of the following methods are now made available for viewing contents of the document library?

A. The list view and tag view B. The list view and folder view C. The tag view and category view D. The folder view and category view

Answer: D

QUESTION NO: 42 Your users are currently browsing through Lotus Quickr and have clicked on a person link. The Person menu will display a set of contact information about the selected person, such as their department. In which of the following locations is this contact information configured?

A. wmm.xml B. Virtual Member Manager C. PeopleAwareness.config D. CSEnvironment.properties

Answer: D

QUESTION NO: 43 Which of the following user registries is utilized for authentication and User and Group management if WebSphere Application Server security is disabled?

A. LDAP user registry B. Custom user registry C. Database user registry D. Local file user registry

Answer: C

QUESTION NO: 44 Policies for Lotus Quickr are grouped in which of the following manners?

A. According to alphabetical order B. According to the types of resources C. According to who created the policies D. According to the sort order for the Lotus Quickr libraries

Answer: B

QUESTION NO: 45 Data for Lotus Quickr is stored in IBM DB2 Universal Database Enterprise Server Edition and sorted into different categories for ease of data transfer across databases. Which of the following are the database data categories?

A. User, Directory, and Feature B. Configuration, Release, and Community C. Customization, Production, and Hierarchy D. Credential, Personalization, and Policies

Answer: B

QUESTION NO: 46 Tim is a member of the Parking Team group. This group has been assigned Delegator rights to the Parking Layout page. Under the Parking Layout page is a group of pages with a parking layout per building. Tim is assigned as Editor to the Building A page with the rest of the building pages set to inheritance. Which of the following rights will Tim have to the Building A page?

A. Editor_Building_A_Page B. Building_A_Page@Editor C. Delegator@Building A Page D. Building A Page_Delegator

Answer: C

QUESTION NO: 47 By default, each child policy inherits the settings of its parent policy unless which of the following conditions are true?

A. The parent policy is deleted, and each child policy is then promoted to a parent policy B. The child policy is marked a library master and applied to a library overriding the assignment of

a previous parent policy C. The parent policy enables the option Allow Changes in Children, and the child policy modifies the value inherited from the parent policy D. The child policy contains variables not found in the parent policy and that are assigned to both library templates and library indexes of uploaded files

Answer: C

QUESTION NO: 48 When you export a policy definition, the policy rule and which of the following are exported with the policy?

A. The association of the policy B. The users defined by the policy C. The places defined by the policy D. The resources defined by the policy

Answer: A

QUESTION NO: 49 When deleting a user or group directly from the configured user registry, which of the following occurs with the database entry for that user or group?

A. It does not remove the database entry B. It immediately removes the database entry C. It removes the database entry on a defined schedule D. It removes the database entry after the Lotus Quickr manager approves the deletions

Answer: A QUESTION NO: 50 To enable single sign-on between the WebSphere Application Server and Lotus Domino environments, which of the following is required?

A. The WebSphere LTPA token generated by WebSphere Application Server is imported into Lotus Domino B. The Lotus Domino LTPA token generated by Lotus Domino is imported into the WebSphere Application Server C. The LTPA token is created locally by the administrator in the LTPA.properties file and imported into both WebSphere Application Server and Lotus Domino D. The LTPA token installer must be run on all WebSphere Application Server and Lotus Domino servers that will participate in the same single sign-on domain

Answer: A

QUESTION NO: 51 You have made numerous user renames and deletions in a short time while building your Lotus Quickr environment. You need to verify whether any Member Manager users or groups referenced in IBM Lotus Web Content Management items have been renamed or deleted from Member Manager. Which of the following performs this function?

A. Member fixer tool B. LDAP browser tool C. wmm.xml editor tool D. User management tool

Answer: A

QUESTION NO: 52 Resources can appear in different database domains depending on the type of resource. In which of the following domains are resources pertaining to user customization data represented by private resources maintained?

A. JCR B. Private C. Community D. Customization

Answer: D

QUESTION NO: 53 Before retrieving the LTPA key from the Lotus Quickr server, for single sign-on and importing it into the Lotus Domino servers, which of the following options must be disabled?

A. Minimal user authentication B. Global authentication mechanisms C. Web inbound security attribute propagation D. LTPA Global Security Enforcement authentication

Answer: C

QUESTION NO: 54 Ophelia has created a policy that controls the Lotus Quickr connectors. In the registry for the user, where are all of the connector policy settings stored?

A. HKEY_USERS B. HKEY_CLASSES_ROOT C. HKEY_LOCAL_MACHINE D. HKEY_CURRENT_CONFIG

Answer: C

QUESTION NO: 55 Which of the following is the component of IBM WebSphere Application Server and IBM WebSphere Portal that provides the common schema of attributes used by People Finder for people and their Profile pages?

A. Member Manager B. Profile Builder C. Business Card Manager D. Corresponding Attributes

Answer: A

QUESTION NO: 56 Earl has been assigned to a new group to access a specific Lotus Quickr place, but he is unable to access this place. Which of the following must occur for him to gain access?

A. He must log out and back in B. Lotus Quickr must be restarted to see the group changes C. The remote LDAP server must be restarted to see the new membership D. The group cache must be manually reset, or he must wait the predetermined amount of time for it to be automatically reset

Answer: A

QUESTION NO: 57 Which of the following types of roles allow users to explicitly create new private pages that are accessible only by themselves?

A. Editors B. Managers C. Delegators D. Privileged Users

Answer: D

QUESTION NO: 58 You wish to prevent a resource from extending role assignments to child resources. Which of the following would you implement to achieve this function?

A. Propagation blocks B. Inheritance blocks C. Lotus Quickr blocks D. Portal scripting blocks

Answer: A

QUESTION NO: 59 Brenda wishes to add a user with the authority to manage certain library elements. Consider the following rights she wishes to assign: Add, delete, or modify:

- shared document types - shared property sheets - shared document templates

Which of the following should be configured to allow this access?

A. - User is a Manager of the page - User is a member of the libraryPageManagement group B. - User is a Manager in the library and a member of the ContentAdmin group, or - User is a member of the ContentAdmin group C. - User is a Manager in the library and a member of the wpsContentAdministrators group, or - User is a member of the wpsContentAdministrators group D. - User is a Manager in the library, or - User is a Manager in the library and a member of the wpsContentAdministrators group, or - User is the creator of the library

Answer: B

QUESTION NO: 60 By default, Member Manager requires users to enter a minimum number of characters when using the Directory Search window to search the organization directory for names. This minimum will not be sufficient for all languages or companies. Which of the following is the default specified?

A. One B. Two C. Three D. Four

Answer: B

QUESTION NO: 61 Directory Search uses the directory configured in Lotus Quickr for information. The directory is comprised of multiple sets of user information. The sets of information are controlled by which of the following components?

A. People Finder B. Member Manager C. People Awareness D. Directory Manager

Answer: B

QUESTION NO: 62 IBM DB2 Universal Database Enterprise Server Edition has strict requirements for creating databases for use with Lotus Quickr. One of the requirements is the maximum database name length. Which of the following is this maximum?

A. 8 B. 16

C. 24 D. 32

Answer: A

QUESTION NO: 63 Which of the following portlets is a common embedded component that allows users to select names of people and groups?

A. People Finder B. Member Manager C. Directory Search D. People Awareness

Answer: C

QUESTION NO: 64 The user ID and password for Lotus Quickr and DB2 must be identical for which of the following groups?

A. Users B. Editors C. Managers D. Administrators

Answer: D

QUESTION NO: 65 You can install more than one copy of Lotus Quickr on the same machine and have each copy operate independently of the others. Each copy of Lotus Quickr must be installed in which of the following ways?

A. As alternate ports on the same IBM HTTP server B. As separate WebSphere Application Server profiles C. As independent copies pointing to different LDAP sources D. As one instance with multiple local WebSphere Member Manager directories

Answer: B

QUESTION NO: 66 You have chosen to establish a demonstration environment for Lotus Quickr for WebSphere Portal. You have selected Microsoft Windows as the operating system for this installation. Which of the following will be installed with Lotus Quickr on this server by default?

A. IBM Lotus Domino Server B. IBM Tivoli License Manager C. IBM WebSphere eCommerce Server D. IBM DB2 Universal Database Enterprise Server Edition

Answer: D

QUESTION NO: 67 Dave is removing the ability for users to download and install the connectors for Lotus Quickr from the server. He has already marked the Connector page inactive. Which of the following steps is also recommended?

A. Uninstall the connectors from the Lotus Quickr server B. Delete the connector.ear file from the Lotus Quickr server

C. Update the CSEnvironment.properties file to exclude the lines that allow Lotus Quickr connector downloads D. Remove the home page graphics, remove the graphic from the library, and remove links from the page footers

Answer: D

QUESTION NO: 68 Before installing Lotus Quickr for WebSphere Portal, which of the following permissions and rights are NOT required for the system logon user ID you will use during installation?

A. The user ID must already exist prior to installation B. The user ID must contain a password that is not shorter than 8 characters C. The user ID must be a local Windows user ID that is in the Administrators group D. The user ID must have specific security access rights if you intend to run Lotus Quickr as a service

Answer: B

QUESTION NO: 69 Due to server space limitations, you need to change the value for the location where the Lotus Quickr server renders attachments as HTML. In which of the following locations would you change the default location for the rendering?

A. wmm.xml B. qpconfig.xml C. convertors.xml D. CSEnvironment.properties

Answer: C

QUESTION NO: 70 Omar is searching his Lotus Quickr places utilizing portal search. His searches include the file type, the document type, the component, and a last-modified time span. Which of the following is the name for these search options?

A. Facets B. Indexes C. Resources D. Attributes

Answer: A

QUESTION NO: 71 Larry has granted access to anonymous users for pages containing the People Finder portlet and granted them access to a hidden page. Users, though, are still not able to utilize this feature. Which of the following items must also be enabled?

A. He must enable session use for anonymous users B. He must enable single sign-on across the portlet C. He must enable anonymous access to the LDAP directory D. He must enable and force access via SSL to the People Finder

Answer: A

QUESTION NO: 72

The library settings for a place have been modified to open the Product Identifiers subfolder within the current document library as the root folder for the library. A user selects a root folder that has been deleted. Which of the following locations will the default root path revert?

A. The Lotus Quickr home page B. The place index for that library C. The current document library root D. The MyPlaces page for the currently logged-in user

Answer: C

QUESTION NO: 73 When a user logs into Lotus Quickr, Lotus Collaborative Services checks which of the following files on the Lotus Quickr server to see whether IBM Lotus Sametime is configured?

A. QPstlinks.properties B. CSEnvironment.properties C. collaborationenvironment.properties D. QuickrAwarenessVariables.properties

Answer: B

QUESTION NO: 74 While viewing the Taxonomy Tree panel, Luis notices that the Sales taxonomy is marked with a red dot. Which of the following represents the reason he is seeing the red dot for Sales?

A. The node is collapsed B. The node has been deleted C. The node is in full usage D. The node has no documents in the taxonomy at that time

Answer: B

QUESTION NO: 75 If you grant access to anonymous users for any page containing the People Finder portlet, you must also grant them access to a hidden page and to which of the following?

A. The Quickr People Viewer with Reader rights B. The local HTML file system via anonymous access rights C. The WebSphere Member Manager portlet with Reader rights D. A dynamic person tag portlet that support awareness in People Finder

Answer: D

QUESTION NO: 76 Users of the connector for Lotus Sametime and the connector for Lotus Notes can invite others through which of the following default methods?

A. By sending URL links via email to the users B. By adding the user as an editor to any place C. By creating a connector room in the places they manage D. By creating connector documents in the main.nsf of the place where they are managers

Answer: B

QUESTION NO: 77

The People Finder at your enterprise shows no results or tells your users to try searching again later. You have properly set the value for the portlet's configuration. Which of the following is the cause for this message?

A. The user is utilizing an unsupported browser B. The value for results in the server's wmm.xml file is smaller than the value for the portlet C. The server has not properly indexed all of the new users from the directory source D. The user has searched for names that do not exist in the WebSphere Member Manager or remote LDAP source

Answer: B

QUESTION NO: 78 Quintin has discovered that one of his search collections is retrieving URLs that are inactive. Which of the following options should he configure for managing his search collection content?

A. View Content Source Schedulers B. Verify Address of Content Source C. Source Categorization Management D. Source Content Verification Service

Answer: B

QUESTION NO: 79 Raphael has accessed the Manage Search portlet to begin building the default search collection. He then configured the portlet for remote search. Which of the following results will be obtained following this order or events?

A. The default portal site search collection is available only on the remote server B. The default portal site search collection is available only on the primary node of the cluster C. The default portal site search collection is synchronized later between all nodes in the cluster D. The default portal site search collection is available only on the local places found where the portlet was accessed

Answer: B

QUESTION NO: 80 Charles uploaded a large number of files in nested folders to this team's library on the Lotus Quickr server. The files at the lowest level, however, are not visible in the library. Which of the following is the best reason why these files are not available?

A. Nested folders are not supported for uploading files B. Documents must be uploaded individually to the library C. The overall length of the path to the lowest levels of folders exceeded the maximum length D. The files were located in a temporary folder on his file system that cannot be seen by Lotus Quickr

Answer: C

QUESTION NO: 81 Users are requesting the ability to resume working in your Lotus Quickr environment from where they last were before logging out. Which of the following Portal options must be configured to satisfy this user request?

A. URL mapping B. Portlet filters C. Dynamic portlet session

D. Persistent session state

Answer: D

QUESTION NO: 82 Currently, the Person Record or Organization View for a found person cannot be opened from a person link in a portlet other than People Finder. Which of the following options will best resolve this discrepancy?

A. Map attributes between LDAP directories B. Remove the usernames of persons not found C. Remove the organization record from the directory source D. Add alias usernames to the persons that cannot be opened

Answer: A

QUESTION NO: 83 When creating a Lotus Quickr cluster, the node federation will fail if the system clocks are not within how many minutes of each other?

A. 5 minutes B. 15 minutes C. 30 minutes D. 60 minutes

Answer: A

QUESTION NO: 84 When a set of documents or other items is presented as a list, such as inside a folder or view, or when search results are displayed, a maximum number of items is included in the list. By default, this maximum number is set to which of the following for folders and views?

A. 100 B. 250 C. 500 D. 1000

Answer: C

QUESTION NO: 85 You can specify Member Manager attributes to determine the items of information in as many as three columns of search results in the Directory Search window, for either people or group names. You do this by modifying which of the following files?

A. qpconfig.xml B. MemberManager.config C. CSEnvironment.properties D. pickersettings.properties

Answer: D

QUESTION NO: 86 The Lotus Quickr server in your organization is being integrated with Lotus Sametime. You have successfully edited the necessary files on the Lotus Quickr server and need to copy over the required feature files from the Lotus Sametime server. Which of the following folder locations is correct for placing these files?

A. sametime B. installedApps C. node-awareness D. wasadmin_presence

Answer: A

QUESTION NO: 87 Which of the following must be installed previous to any configurations in a Lotus Quickr cluster?

A. Cell B. Cluster C. Synchronizer D. Deployment manager

Answer: D

QUESTION NO: 88 Under normal circumstances, you will exclude all administrative portlets and all portlets that represent highly dynamic content from being accessible to the crawler user. Which of the following will occur if you do this, outside of exposing confidential content?

A. The user may access pages anonymously B. The Delete action can be invoked through the crawler C. The server may store administrator logins in the search results D. The Lotus Quickr server may respond to requests without utilizing single sign-on

Answer: B

QUESTION NO: 89 You wish to aggregate roles from different database domains. These will then be aggregated to simplify access control administration. Which of the following features performs this function?

A. Role binding B. Role merging C. Compiled roles D. Application roles

Answer: D

QUESTION NO: 90 When you work with policy rules and conditions, you automatically move out of the Resource Policies portlets and into which of the following?

A. Rule Portlet B. Conditional Editor C. Policy Engine Editor D. Personalization Editor

Answer: D

QUESTION NO: 91 Users have been creating numerous folders in the library used by the accounting group. The manager of that department has requested that this capability be removed. Which of the following steps must be performed?

A. Hide the folder selection icon from library authors B. Remove users from the FolderAdmin role in the library C. Select the Lock folder structure option in the library properties D. Modify CSEnvrionment.properties to exclude folder creation in that specific library

Answer: C

QUESTION NO: 92 Don is adding the user Kraig as an Editor to the Product Development resource. Which of the following represents the role assigned to Kraig by Don, the administrator? A. Editor_ProductDeveopment B. Editor@Product Development C. Product Development Editor D. Product_Development_Editor

Answer: B

QUESTION NO: 93 Specific users have been granted the ability to navigate through all parent resources of specific resources. The users see only the title of those resources, while the corresponding resource content (for example, the portlets on the page) remain inaccessible. Which of the following rights have they been assigned?

A. Page B. Wired C. Privileged D. URL Support

Answer: A

QUESTION NO: 94 To enable search on secured portal sites, you need to enter sensitive data, such as a user ID and password for the crawler. To ensure encryption of this sensitive data when it is stored, which of the following steps should you perform before enabling search on the secured portal site?

A. Run the file searchsecret.xml using the XML configuration interface B. Remove the anonymous setting from all data to force secured searching C. Enter the username and password in CSEnvrionment.xml to be utilized for searching D. Store the username and password to be utilized for searching in the Search portlet

Answer: A