17th CIRP Conference...17th CIRP Conference on Modeling of Machining Operations Sheffield, UK 13 -...
2
17th CIRP Conference on Modeling of Machining Operations Sheffield, UK 13 - 14 June, 2019 amrc.co.uk/cirp-cmmo2019 Deadlines Objectives This will be the 17th Conference of a successful conference series initiated in 1998. The goal of the Conference series is to stimulate the development and use of models capable of qualitatively and quantitatively predicting the performance of metal cutting operations better adapted to the needs of the metal cutting industry. To achieve this goal, the following objectives of the conference were established: • To bring together international specialists from the industry and academia to present recent advances and trends on modeling of metal cutting/machining operations • To stimulate constructive discussion between model developers and end-users • To provide an opportunity for participants to develop networking interactions • To identify the current status on modeling machining operations and to provide recommendations and perspectives for future research The scientific program will cover formal sessions devoted but not limited to: Abstract due: September 28th, 2018 Notification of abstract acceptance: October 19th, 2018 Paper due: December 14th, 2018 Reviewed paper returned: February 22nd, 2019 Final paper submission: March 15th, 2019 Notification of final acceptance: April 5th, 2019 Topics • Numerical and Analytical Modeling • High-Performance and Hard Machining • Material Behavior and Tribological Aspects in Cutting • Precision, Ultra-Precision and Micro-Machining • Grinding and Non-Conventional Processes • Multiphysics and Multiscale Modeling • Dynamics and Stability of Machining • Monitoring and Diagnostics • Surface Integrity of Machined Components • Optimisation of Machining Processes • Thermal Effects and Part Distorsion • Machining of Complex Surfaces
Transcript of 17th CIRP Conference...17th CIRP Conference on Modeling of Machining Operations Sheffield, UK 13 -...
17th CIRP Conferenceon Modeling of Machining Operations
Sheffield, UK13 - 14 June, 2019
amrc.co.uk/cirp-cmmo2019
Deadlines
Objectives
This will be the 17th Conference of a successful conference series initiated in 1998. The goal of the Conference series is to stimulate the development and use of models capable of qualitatively and quantitatively predicting the performance of metal cutting operations better adapted to the needs of the metal cutting industry.To achieve this goal, the following objectives of the conference were established:
• To bring together international specialists from the industry and academia to present recent advances and trends on modeling of metal cutting/machining operations
• To stimulate constructive discussion between model developers and end-users
• To provide an opportunity for participants to develop networking interactions
• To identify the current status on modeling machining operations and to provide recommendations and perspectives for future research
The scientific program will cover formal sessions devoted but not limited to:
Abstract due: September 28th, 2018Notification of abstract acceptance: October 19th, 2018Paper due: December 14th, 2018Reviewed paper returned: February 22nd, 2019Final paper submission: March 15th, 2019Notification of final acceptance: April 5th, 2019
Topics
• Numerical and Analytical Modeling
• High-Performance and Hard Machining
• Material Behavior and Tribological Aspects in Cutting
• Precision, Ultra-Precision and Micro-Machining
• Grinding and Non-Conventional Processes
• Multiphysics and Multiscale Modeling
• Dynamics and Stability of Machining
• Monitoring and Diagnostics
• Surface Integrity of Machined Components
• Optimisation of Machining Processes
• Thermal Effects and Part Distorsion
• Machining of Complex Surfaces
Mustapha Abouridouane, GermanyMatthew A.Davies, USAYusuf Altintas, CanadaPedro-José Arrazola, SpainViktor Astakhov, USAAldo Attanasio, ItalyHelmi Attia, CanadaJan Christian Aurich, GermanyA.K Balaji, USADirk Biermann, GermanyK. Bouzakis, GreeceEkkard Brinksmeier, GermanyErhan Budak, TurkeyGerry Byrne, IrelandOlivier Cahuc, FranceMadalina Calamaz, FranceElisabetta Ceretti, ItalySrinivasan Chandrasekar, USATom Childs, UKJean-Philippe Costes, FranceAlain D’Acunto, FranceBerend Denkena, GermanyGilles Dessein, FranceZhang Dinghua, ChinaEmmanuel Duc, FranceDaniel Dudzinski, FranceMohamed El Mansori, FranceLuigino Filice, ItalyMichael Fontaine, FranceGuillaume Fromentin, FranceBenoit Furet, FranceGuenael Germain, FranceEdvard Govekar, SloveniaWit Grzesik, PolandYuebin Guo, USAHédi Hamdi, FranceJean-Yves Hascoët, FranceHong Hocheng, Taiwan
Lu Hong, ChinaIchiro Inasaki, JapanR.S. Jadoun, IndiaI. S. Jawahir, USAK. Jemielniak, PolandYigit Karpat, TurkeyYusuf Kaynak, TurkeyHossam Kishawy, CanadaFritz Klocke, GermanyPhil Koshy, CanadaYann Landon, FranceIsmail Lazoglu, TurkeyJurgen Leopold, GermanyChristophe Lescalier, FrancePhilippe Lorong, FranceTarek Mabrouki, TunisiaTakashi Matsumura, JapanShreyes Melkote, USAAbdelhadi Moufki, FranceRachid M’Saoubi, UKMohammed Nouari, FranceHorejs Otakar, Czech RepublicJosé Outeiro, FranceTugrul Ozel, USAErdem Ozturk, UKGérard Poulachon, FranceFranci Pusavec, SloveniaJoël Rech, FrancePedro Rosa, PortugalFrédéric Rossi, FranceVolker Schulze, GermanyLuca Settineri, ItalySein Leung Soo, UKRoberto Teti, ItalyChristophe Tournier, FranceDomenico Umbrello, ItalyLuis Uriarte, SpainJun Wang, Australia
Conference articles will be published in EES Procedia CIRP (http://ees.elsevier.com/procir), available online at www.sciencedirect.com
Publications
Scientific Committee Conference Chairmen
Chairman: Dr Erdem [email protected] with Boeing, The University of Sheffield
Co-Chairs: Dr Tom [email protected] with Boeing, The University of Sheffield
Dr Rachid M’[email protected] Tools (UK) Ltd
Early bird registration feeBefore 1 May, 2019 £550
Standard registration fee1 May 2019 - 12 June, 2019 £600
Onsite registration fee £650
Lauren Hockenhull AMRC Knowledge Transfer Centre (KTC)Advanced Manufacturing Research CentreBrunel Way, Catcliffe, S60 5TZ.
For any conference enquiries, please contact: [email protected]
Registration
Conference Secretariat
Book your place online at: amrc.co.uk/cirp-cmmo2019
