164 19 24 26 59 user manual - Art4LightD ownload the a pp f rom A ple A p Sto e o Go gle Play Store....
2
ENGLISH Bluetooth controlled push dimmer 2ch monoichrome / Tunable white Casambi ready control unit for LED DEVICES Note 1. This device is a built-in class II device. Use double insulated wires or an external mounting box if the device is not mounted inside another insulated device. Warning! Only qualified professionals should make the connections. Disconnect the mains of the used power supply prior to instalation ! Description This casambi ready led controller/dimmer is designed to be used with monochroom types and tunabkle white types of LEDflex. The voltage that is connected at the input will be found at the output so be sure that the used power supply and led type are rated on the same voltage. You can change the module from the monochrome to the tunable white mode in the app. The method to do this is descibed in this document. The module also has a push button connection. This can be used to control the connect led lights. Short press will restult in ON or OFF and a long press will dim the light untill you release the button. The push button can also be configured to control a scene or another casambi module in the same network ’. First time use Casambi app is easy to use. Follow these simple steps. 1. Download the app from Apple App Store or Google Play Store. 2. Turn on your Casambi enabled luminaires. 3. Open the app. 4. Casambi app will automatically nd all Casambi enabled luminaires that are switched on. 5. Tap on the ‘Take all lamps into use’ 6. Casambi app will automatically add all luminaires to one network and open the ‘Lamps’ tab Basic gestures Here are the basic gestures how to control your lights. • To turn o or on your luminaire just tap on the lamp control. • Pan lamp control left or right to adjust light level of the luminaire. • Pan lamp control up or down to adjust the colour temperature of the luminaire. • Hold on top of the lamp control to change the colour and save colours to palette. 1. 2. 3. 4. 5. Networks and Sharing If you want to control your luminaires from more than one mobile device you need to change the network sharing settings. As a default the created network is not shared and only stored in the device that created it. Go to ‘More’ tab and select ‘Network setup’ and ‘Sharing settings’. Tap on the Sharing and the ‘Sharing mode’ screen will open. There are four di erent sharing modes: Not Shared, Administrator only, Password protected and Open. When you select Administrator only, Password protected or Open mode the network will be uploaded to cloud server and then it can be accessed also from other mobile devices. Add also email address and password for the network. Con rm your settings with ‘Save Wiring diagram 2ch monochrome Warning! Risk of fire. Do not short circuit the outputs ! 12-24Vdc switch and dim the connected lamp LEDflex 2 PUSH BUTTON Compact push button dimmer casambi ready 12-24V | PB-IN | 4A/ch PUSH BUTTON 164 19 24 26 59 24VDC IN OUT LED Standard mode : 2CH mono Optional: Tunable white CH1 WW CH2 CW LEDflex 1 Dimensions 22 mm 90 mm 17 mm 17 cm Change between 2ch Monochrome and Tunable White mode This module comes standard in a 2ch monochrome mode. This means the two outputs of the module can be used to drive two lengths of ledflex and you will be able to controll them separately by tapping long time on the icon. In order to change into tunable white mode please follow the instructions below. 1. Open the app and go to Nearby Devices 2. Select the module by tapping on it. 3. Choose select profile 4. You will see the available profiles. If you now push on 2ch_TW_PB icon the module will be reconfigured as a tunable white device. If you would like to returnto the monochrome mode you will need to do the same steps. You will see that the available mode will be 2ch monochrome then. Wiring diagram Tunable white Warning! Risk of fire. Do not short circuit the outputs ! 12-24Vdc switch and dim the connected lamp LEDflex TW PUSH BUTTON Compact push button dimmer casambi ready 12-24V | PB-IN | 4A/ch PUSH BUTTON 164 19 24 26 59 24VDC IN OUT LED Standard mode : 2CH mono Optional: Tunable white CH1 WW CH2 CW
Transcript of 164 19 24 26 59 user manual - Art4LightD ownload the a pp f rom A ple A p Sto e o Go gle Play Store....
ENGLISH
Bluetooth controlled push dimmer2ch monoichrome / Tunable whiteCasambi ready control unit for LED DEVICES
Note 1. This device is a built-in class II device. Use double insulated wires or an external mounting box if the device is not mounted inside another insulated device.
Warning!Only quali�ed professionals should make the connections. Disconnect the mains
of the used power supply prior toinstalation!
Description
This casambi ready led controller/dimmer is designed to be used with monochroom typesand tunabkle white types of LED�ex. The voltage that is connected at the input will befound at the output so be sure that the used power supply and led type are rated on thesame voltage. You can change the module from the monochrome to the tunable whitemode in the app. The method to do this is descibed in this document.
The module also has a push button connection. This can be used to control the connect ledlights. Short press will restult in ON or OFF and a long press will dim the light untill yourelease the button. The push button can also be con�gured to control a scene or anothercasambi module in the same network
’.
First time use Casambi app is easy to use. Follow these simple steps.
1. Download the app from Apple App Store or Google Play Store.
2. Turn on your Casambi enabled luminaires.
3. Open the app.
4. Casambi app will automatically nd all Casambi enabled luminaires that are switched on.
5. Tap on the ‘Take all lamps into use’
6. Casambi app will automatically add all luminaires to one network and open the ‘Lamps’ tab
Basic gestures Here are the basic gestures how to control your lights.
• To turn o or on your luminaire just tap on the lamp control.
• Pan lamp control left or right to adjust light level of the luminaire.
• Pan lamp control up or down to adjust the colour temperature of the luminaire.
• Hold on top of the lamp control to change the colour and save colours to palette.
1.
2.
3.
4.
5.
Networks and SharingIf you want to control your luminaires from more than one mobile device you need to change the network sharing settings. As a default the created network is not shared and only stored in the device that created it.
Go to ‘More’ tab and select ‘Network setup’ and ‘Sharing settings’.
Tap on the Sharing and the ‘Sharing mode’ screen will open.
There are four di erent sharing modes: Not Shared, Administrator only, Password protected and Open. When you select Administrator only, Password protected or Open mode the network will be uploaded to cloud server and then it can be accessed also from other mobile devices.
Add also email address and password for the network.
Con rm your settings with ‘Save
Wiring diagram 2ch monochrome
Warning!Risk of �re. Do not short circuitthe outputs!
12-24Vdc
switch and dim the connected lamp
LED�ex 2
PUSH BUTTON
Compact push button dimmercasambi ready12-24V | PB-IN | 4A/ch
PUSH BUTTON
164 19 24 26 59
24VD
CIN
OU
TLE
D
Standard mode : 2CH monoOptional: Tunable white
CH
1W
WC
H2
CW
LED�ex 1
Dimensions
22 m
m
90 mm
17 mm
17 cm
Change between 2ch Monochrome and Tunable White mode
This module comes standard in a 2ch monochromemode. This means the two outputs of the module canbe used to drive two lengths of led�ex and you willbe able to controll them separately by tapping long time on the icon.
In order to change into tunable white mode please follow the instructions below.
1. Open the app and go to Nearby Devices2. Select the module by tapping on it.
3. Choose select pro�le
4. You will see the available pro�les. If you now push on 2ch_TW_PB icon the module will be recon�gured as a tunable white device.
If you would like to returnto the monochrome mode you will need to do the samesteps. You will see that the available mode will be 2ch monochrome then.
Wiring diagram Tunable white
Warning!Risk of �re. Do not short circuitthe outputs!
12-24Vdc
switch and dim the connected lamp
LED�ex TW
PUSH BUTTON
Compact push button dimmercasambi ready12-24V | PB-IN | 4A/ch
PUSH BUTTON
164 19 24 26 59
24VD
CIN
OU
TLE
D
Standard mode : 2CH monoOptional: Tunable white
CH
1W
WC
H2
CW
Range
Casambi uses mesh network technology so each module acts also as a repeater. Longer ranges can be achieved by using multiple casambi ready units.
Compatible devices: iPhone 4S or lateriPad 3 or lateriPod Touch 5th gen or laterAndroid 4.4 KitKat or later devicesproduced after 2013 with full BT 4.0 support
50 m 1)Up to40 m 1)
1) Range is highly dependant on the surrounding and obstacles, such as walls and building materials.
InputVoltage range: 12 - 24Vdc
OutputOutput amps: 4AVoltage range: 12 - 24Vdc same as input)
Push button input Max. current:
0.2 mA @ 24Vdc Vcc
Radio transceiverOperating frequencies: 2,4...2,483 GhzMaximum output power: +4 dBm
Operating conditionsAmbient temperature, ta: -20...+45°C Storage temperature:
-25...+75 °C
Max. relative humidity:
0...80%, non-cond.
ConnectorsWire range, solid & stranded: 0,2-2,5 mm2
Tightening torque:
0,4 Nm/4 Kgf.cm/2,6 Lb-In
Mechanical dataDimensions: 90 x 70 x 32 mmWeight: 0,1 KgDegree of protection: IP20 (indoor use only)
Technical data
PartnumbersBluetooth compact dimmercasambi ready 2CH / 2x4A / TW
164 19 24 26 59
Drieslaan 68560 Wevelgem (Moorsele)
Tel: +32 56 42 49 92Fax: +32 56 43 57 07
[email protected] - www.ledsgo.eu
![Welcome [] Parkways/PKWY-00043... · 2021. 1. 25. · 3 Get Started. ownload the CareATC Mobile App With the CareATC mobile app, you can take your wellness with you anywhere, anytime!](https://static.fdocuments.us/doc/165x107/60e42e6524923031534d1392/welcome-parkwayspkwy-00043-2021-1-25-3-get-started-ownload-the-careatc.jpg)
