160 - Marine & Motorhome · 8-1 These compact vents are a small version of the 400x400 Vent 160....

8-1

These compact vents are a small version of the 400x400 Vent 160. Made of superior quality impact and UV resistant materials. Supplied with permanent air flow ventilation and fitted with a permanent mosquito screen. The external aerodynamic cover guarantees a watertight system.

For installation on roof thicknesses to a max 8.5cm order the Handle Extension Kit 002732

160

001487 (SA14057) WHITE 280x280 001489 (SA14059) CRYSTAL GREY 280x280 001853 (SA15013) LID WHITE 001854 (SA15014) LID CRYSTAL GREY

001488 (SA14058) WHITE WITH FAN 280x280 001491 (SA14060) CRYSTAL GREY WITH FAN 280x280

The Turbo 28 Vents have the same features as above but with the addition of a 12v fan. Ideal for airing small spaces. Air can be drawn in or expelled out at the flick of a switch. Fan is high powered. For installation on roof thicknesses to a max 8.5cm order the Handle Extension Kit below: 002732 (SA235) Handle Extension Kit for Turbo 28

Voltage 12v DC

Watts 25 w

Max Amps 1.9amp

Fan Diameter 180mm

040694 WHITE 400x400 008617 CRYSTAL GREY 400x400

Internal View of Permanent Flyscreen

Colour Ivory

The Vents Lid Can Be Easily Replaced Due To The Quick Installation Hinges

Roller Blind 400x400 Roller blind system for installation on FIAMMA vents 400 x 400mm. Permanent ventilation thanks to side grills. Low profile frame. 003661 (SA646)

Aerodynamic, thanks to its elegant external profile top. During high-speed testing noise and vibrations are greatly reduced. Thanks to the new outside cover and exclusive patented rubber seal, a watertight system guarantees rain streams down without the possibility of it coming in. Made from UV-Ray resistant

materials. Can be installed on roofs with depths of 2.5cm to 5.0cm Max.

For installation on roof thickness to a max 8.5cm order the Handle Extension kit below: 002732 (SA235) Handle Extension Kit for Vent 160 400x400

Marine & Motorhome Ltd 7 Kitchener St Dunedin 03 477 5313

8-2

The Turbo Vent is a ventilation system made from high quality materials, that are shock and UV-resistant. It changes and refreshes the air inside your vehicle within seconds thanks to the high speed motor and massive 10 blade fan. It is the only vent of its kind with an innovative electronic circuit that allows rapid, problem free, change of rotation. The cover is open and closed manually, with a central arm providing additional stability. Supplied with Double external mosquito screen to collect leaves and other debris from falling into the vehicle. Can be installed on roofs with depths of 3cm to 45cm. For installation on roof thicknesses of more than 45mm order the Handle Extension kit below: 002732 (SA235) Handle Extension Kit for Turbo

Wide pantograph roof vent that opens on all four sides with strong practical handles - commonly known as a 4 Way vent. Maintains constant vehicle ventilation and is now also available with standard roller blind and flyscreen. Assures permanent ventilation. Locking anti-theft device on the handles. Rainproof and windproof. Made from high quality UV ray-resistant materials.

002866 (SA257) WHITE TURBO VENT 400 x 400 002867 (SA257(G)) - CRYSTAL GREY TURBO VENT 400 X 400 INDENT

Voltage 12v DC

Watts 36 w

Min Amps 0.3

Max Amps 3.0

Fan Diameter 300 mm

The Polar Control thermostat regulates the incoming and outgoing air according to the temperature inside the vehicle. Quiet at night thanks to the optimal minimum speed setting.

002858 (SA253) VENT 50x50 WHITE 4 Way Push Up Vent

002859 (SA255) VENT 50x50 CRYSTAL GREY 4 Way Push Up Vent

Crystal Grey Pictured Above

To Upgrade your 50x50 Vent with a Roller Blind and Flyscreen pictured above order: 003662 (SA648) Roller Blind and Flyscreen


CAMEC NZ LTD. Phone: 09 257 2419. Fax: 09 255 1910. Email: [email protected]. Web.: www.camec.co.nz 8-3

REMIS DELUXE ROOF VENT 400x400 Cut out ABS frame. Double glazed acrylic hatch. Standard with roller blind and flyscreen. Push Up Style. Standard Crystal Clear vent lid. 003000 (SA2975) DELUXE REMIS VENT 400x400 003001 (SA2975A) REPLACEMENT CRYSTAL VENT LID Spare Part Sold Separately

REMI TOP 2 DELUXE SLIDING VENT The tinted dome slides almost fully to one side. Complete with sun screen blind and insect blind. Double glazed acrylic panes. Can be installed on roofs 28 to 50mm thick. Height above roof 120mm. Can be used as an escape hatch.

Exterior dimensions, upper part: 545 x 545mm 812 x 1112mm 812 x 812mm

„VARIO‟ Multifunctional Roof Vent The NEW „Wind UP‟ style of roof vents from Remis. Simply just reach up and push the fold away handle and out it will pop from the interior panel, allowing you to easily wind the skylight into your preferred

position. Vent opens up to 60° offering excellent ventilation.

Constructed with a lightweight yet sturdy plastic frame. Double glazed acrylic panel, providing excellent insulation properties. Integrated sliding blind and flyscreen. Suitable roof thickness of 45-55mm Mood lighting standard on model: 003497 (SA4610-004) 600x900

Pictured Left: Internal View of Flyscreen 003495 (SA4610-002) VARIO 500x700 ROOF VENT

Weight 10kg

003494 (SA4610-001) REMI TOP 2 SLIDING VENT A 400 x 400mm Cut Out (28 to 60mm thickness) 003005 (SA2976) REMI TOP 2 SLIDING VENT C 600 x 600mm Cut Out

External dimensions, bottom frame: 472 x 540mm 670 x1027mm 670 x 727mm


8-4

4 WAY ROOF VENT - 400x400 Complete with roller blind and fly screen. 002860 (SA256) White 002861 (SA256(C)) Clear 002862 (SA256CL) Clear Replacement Lid 002865 (SA256VA) Handle & Arms 002863 (SA256L) White

EUROPEAN ROOF VENT - 280x280 Vent opens 4 ways. 002920 (SA2675) White 002921 (SA2675(C)) Clear 001747 (SA1482) Optional Flyscreen

ROOF VENT - 500x500 Fits opening 480 x 480mm. Vent opens 4 ways. With roller Blind and Flyscreen 002923 (SA2676) White 002924 (SA2676(C)) Clear

SPOILER 40 X 40 UV resistant ABS plastic. Can be screwed or fixed with adhesives. Fit most roofs using spacers provided. 002934 (SA273) INDENT

UNIVERSAL VENT INSTALLATION KIT 002741 (SA2407) (Retail Pack) Also for Fridge Vents

Features:

Modern looking

One piece moulded body

Opens all 4 sides

Removable fly screens

Large control knobs for ease of use

Exceeds gas regulation requirements 220scm

Easy to fit

Fits old Four Seasons hatch cutout

Supplied with wind deflector

Supplied with screws and foam tape for fitting

Internal trim available

Spare parts available

Technical Specifications

Dimensions -

Installed Height 130mm

Overall 720mmW x 720mmD Cut Out 660mm x 660mm Weight 3.25kgs Continuous Airflow 220cm2

The Camec Four Seasons Hatch has features to make it the most versatile and easy to use hatch on the market. Open-ing from all 4 sides, with fully removable fly screens for ease of cleaning or replacement, easy to open and close, can be left partly open while out of the caravan for the day, allowing airflow into your caravan while having no concerns of water getting in through the hatch if it rains.

CAMEC FOUR SEASONS HATCH

004209 Camec Four Seasons Hatch 004210 Internal Trim 50mm


8-5

REPLACEMENT ROOF VENT 14” X 14” Jensen lid assembly (plastic hinge) replacement: 1. Open existing lid by turning the crank

handle. 2. From the roof of the RV, remove

screw at each end of hinge. 3. Remove pin from hinge assembly. 4. Slide lid off crank arm. 5. To install new lid, reverse steps 1 to 4.

003783 (SA791) Smoke ONLY NOTE: LIMITED STOCK AVAILABLE

FIAMMA REPLACEMENT ROOF VENT LIDS 280x280 New Aerodynamic Style 001853 (SA15013) White 001854 (SA15014) Crystal Grey 400x400 Old Style 002901 (SA264) White (Old style) 400x400 New Aerodynamic Style 002907 (SA264N) White 004265 (SA264NC) Crystal 003147 (SA320N) Smoke 500x500 4 WAY Pop Up 002914 (SA266) White 002917 (SA266C) Crystal FIAMMA SPARE PARTS 003919 (SA956) Winder Mechan for SA251(N) 001478 (SA14046) Winder Mechan for SA251(NN) 002996 (SA291) Extension Kit for SA251(N) 002732 (SA235) Extension Kit for New Type 002993 (SA290) Replacement Winder Handle 001855 (SA15017) Insect Screen for 280x280 002949 (SA275A) Insect Screen for SA251(N) 002950 (SA275B) Insect Screen for SA251(NN) 003876 (SA895) L/H Arm for 50x50 003877 (SA895R) R/H Arm for 50x50 003662 (SA648) Roller Blind/Flyscreen 50x50 003875 (SA894) Handle for 50x50

Roof Vent Replacement Lids and Spare Parts

REPLACEMENT ROOF VENT 14” X 14” To replace a NEW Jenson Roof Hatch with plastic hinge moulded as part of vent lid: 000402 White

ELIXER SPARE PARTS 000404 (6005-601-11) Elixir Winder Handle 000403 (6005-501-98) Winder Mech for Jenson/Elixir 000406 (6005-601-17) 60mm Roof Thickness Garnish 000405 (6005-601-15) Insect Screen NOTE: LIMITED STOCK AVAILABLE

SOLD OUT

REPLACEMENT ROOF VENT 14” X 14”

To replace an old Elixir cover assembly (prior to 1994) with metal tube-like

hinge: 1. Open existing lid by turning crank handle. 2. Remove crank handle. 3. Remove trim (4 screws) and screen (2

screws). 4. Remove crank (2 screws) and slide out

of hardware in lid. 5. From roof of RV, remove screw from

each end of hinge and slide off lid. 6. To install new cover, reverse steps 1 to

5.

000971 (SA1048) Smoke

REPLACEMENT ROOF VENT 14” X 14” Ventline & new Elixir (since 1994) lid assembly (metal hinge) replacement: 1. Open existing lid by turning crank

handle. 2. Remove crank handle. 3. Remove trim (4 screws) and screen (2

screws). 4. Remove crank (2 screws) and slide out

of hardware in lid. 5. From roof of RV, straighten hinge curl

at one end (use pliers) and slide off cover.

6. To install new lid, reverse steps 1 to 5, closing hinge curl at the end.

003781 (SA785) Smoke

SOLD OUT


CAMEC NZ LTD. Phone: 09 257 2419. Fax: 09 255 1910. Email: [email protected]. Web: www.camec.co.nz 8-6

JUPITER 2 RADIUS CORNERS SINGLE HOPPER

Camec Caravan, Motorhome, Horsetruck Windows INDENT ONLY

Manufactured for Australian Conditions. Lightweight and glazed with UV stablised tinted acrylic. Windout Operation. Full Range of Sizes (please contact us for further information). Flyscreen. Easy face-fix installation.

REGULAR 2 RADIUS CORNERS SINGLE HOPPER

Black or white powder coated frame

Size (h x w)

280mm x 457mm

280mm x 610mm

280mm x 762mm

280mm x 1175mm

380mm x 457mm

380mm x 610mm

380mm x 762mm

380mm x 914mm

380mm x 1175mm

380mm x 1524mm

450mm x 610mm

450mm x 762mm

450mm x 914mm

450mm x 1175mm

508mm x 914mm

508mm x 1175mm

508mm x 1524mm

565mm x 914mm

565mm x 1175mm

565mm x 1524mm

JUPITER 4 RADIUS CORNERS

SINGLE HOPPER

Size (h x w) Colour Available

813mm x 762mm Black only

903mm x 914mm Black or White

DOUBLE HOPPER

Size (h x w) Colour Available


951mm x 914mm Black only


Black or white powder coated frame. Glazing Clear Float Glass Tinted Float Glass Obscure Float Glass

Sizes Available (h x w)

280mm x 457mm

280mm x 1175mm

380mm x 1175mm

450mm x 762mm

450mm x 1175mm

508mm x 914mm

508mm x 1175mm

508mm x 1524mm

565mm x 1175mm

851mm x 914mm

1137mm x 914mm


8-7

INDENT ONLY

SLIMLINE 4 RADIUS CORNERS

Sizes Available (h x w)

380mm x 457mm

380mm x 914mm

380mm x 1175mm

380mm x 1524mm

450mm x 610mm

450mm x 762mm

450mm x 914mm

450mm x 1175mm

565mm x 610mm

565mm x 762mm

565mm x 914mm

565mm x 1175mm

565mm x 1524mm

737mm x 914mm

1028mm x 914mm

Full fixed insect screen. Clamp rings included ADR stamp. Black or white powder coated frame Clamp ring sizes: 22mm, 27mm and 29mm

SLIMLINE 4 RADIUS CORNERS SLIDING WINDOWS

Black or white powder coated frame. Tinted toughened safety glass. Clamp rings included. Clamp ring sizes: 26mm and 33mm

NOTE: Fixed panel of the sliding window is always at the front of the vehicle.

Sizes Available (h x w) Hand

260mm x 550mm Right or Left
























Caravan, Motorhome, Horsetruck Windows


8-8

Internal Door Trim Plastic moulding to trim the internal flashing for doors. Sold in 4.38m lengths 000487 (7059-135)

CAMEC DOOR The Camec three point dual purpose super strong door. Designed in Australia. Incorporates a security screen and fixed flat acrylic or tinted toughened safety glass panel in the upper half of the outer door. Black or White powder coated frame.

SLIMLINE DOOR WITH 2 RADIUS CORNERS Manufactured to suit harsh Australian conditions. The radius top prevents tears in the annexe roof. Fitted with a triple lock and security screen with a multi brush buffer seal to keep insects out. A fixed flat acrylic panel is incorporated into the upper half of the outer door. Black or White powder coated frame.

Features:

Australian Made

Unique design - main door separates from the security

door with patented locking function

3 point locking dual purpose incorporating a security

door.

Heavy duty rigid and strong aluminium extrusions.

Improved security.

Easy Operation.

Ventilated to comply with gas codes.

Specially extruded water and dust seals.

Ready for immediate installation into aperture.

Infill: Smooth White Left hand or right hand hinged Sizes Available (h x w) 1750mm x 622mm 1822mm x 622mm 1908mm x 622mm 1908mm x 762mm

Features:

Australian made product.

Unique design - main door separates from the security

door.

Heavy duty rigid and strong aluminium extrusions

Solid one-piece laminated infill panels.

Ventilated to comply with gas codes.

Specially extruded water and dust codes.

Ready for immediate installation into aperture.

Flat acrylic panel.

3 point locking dual purpose door incorporating security

screen.

Infill: Smooth White Left hand or right hand hinged Sizes Available (h x w) 1750mm x 622mm 1822mm x 622mm 1908mm x 622mm

-Caravan and Motorhome Doors


CAMEC NZ LTD. Phone: 09 257 2419. Fax: 09 255 1910. Email: [email protected]. Web.: www.camec.co.nz 8-9

Camec - Doors and Window Spare Parts

For more information on doors and spare parts please refer to the Camec Catalogue or contact the sales team at CAMEC

000471 (7016-200-LH-BLK) Complete Camec Door Lock Assembly LEFT HAND 000472 (7016-200-RH) Complete Camec Door Lock Assembly RIGHT HAND

Barrel and Key 000481 (7016-250)

Catch Pin 000479 (7016-214)

Hook Catch 000480 (7016-218)

Striker 000473 (7016-209)

Remote Latch Assembly 000476 (7016-212-LH) Left Hand 000477 (7016-212-RH) Right Hand

Main Door Lock 000475 (7016-211.LH) Left Hand 000474 (7016-211-RH) Right Hand

Replacement Parts for Camec Windows

Link Box Wind Out Window Links sash to control box arm 000428 Link Box

End Plug Wind Out Window Fits into head of rail 000434 (6816-024) Eng Plug

Slide Lock Wind Out Window 2 Piece level lock assembly 000429 (6816-016) Slide Lock

Handle Wind Out Window 2 Types available 000430 (6816-018) Straight Handle 000431 (6816-020) 45° Handle

Control Boxes Wind Out Window 000424 (6816-010) Large Right Hand 000425 (6816-011) Large Left Hand 000426 (6816-012) Small Right Hand 000427 (6816-013) Small Left Hand

Corner Inserts Wind Out Window Corner Inserts that secure the top mitred corners of the sash 000432 (6816-021) Nylon INDENT 000433 (6816-022) Die-Cast INDENT

Outer Trim Assembly 000478 (7016-213)

Large: 295mm Small: 90mm


8-10

One Key Fits All

ONE KEY SOLUTION FOR ALL YOUR LOCKS! Caravan and RV Vehicles are equipped with a variety of doors, hatches, vents and outlets that are all fitted with different locks requiring different keys to unlock each one. Camec now has a solution that allows your to upgrade each of these locks so you only need one key to unlock all of them.

CAMEC 2RC MINI DOOR LOCK HOUSING Suits Camec‟s 2RC mini door and Avan water fillers. This replacement housing accommodates Camec‟s „One Key Fits All‟ barrel eliminating the need to have a different key for every lock. 040268

CAMEC STORAGE DOOR LOCK HOUSING Replacement handle for Jayco, Viscount and other access doors. This new housing accommodates Camec‟s „One Key Fits All‟ barrel eliminating the need to have a different key for every lock 040187

BARREL KITS Replacement barrel kits for all lock housings capable of being fitted with „One Key Fits All‟ barrels. Kits are supplied with dust covered stainless steel capped zinc plated barrels with keys and 1 exchange key to remove the old barrels. 2000 key combinations for added security. 039949 2 barrel 039950 4 barrel 039951 6 barrel 039952 8 barrel

CAMEC SQUARE ACCESS DOOR LOCK HOUSING Replacement housing for all Camec Square Access Doors. This new housing accommodates Camec‟s „One Key Fits All‟ barrel eliminating the need to have a different key for every lock 040186

OUTER HOUSING CAMEC DOOR Replacement outer housing for all Camec 3 point locking doors. The new housing will enable it to accommo-date the „One Key Fits All‟ barrel. Replacement housing is only required for doors without a Camec logo on the handle. 040184

BARREL ADAPTER THETFORD ACCESS & CASSETTE DOORS This barrel adaptor enables the fitment Camec‟s „One Key Fits All‟ barrel eliminating the need to have a different key for every lock. 040185

T-HANDLE Replacement handle for Windsor Rapid and Coromal Transformer Caravansouter housing for all Camec 3 point locking doors. The replacement handle features a new hous-ing capable of accommodating the „One Key Fits All‟ barrel. 039954

T-BOOT HANDLE Replacement handle for existing boot door handles of the same dimensions. The replacement handle features a new housing capable of accommodating the „One Key Fits All‟ barrel. 039953


8-11

Move Me ...like you‟ve never moved me before

Remote Controlled Caravan Movers

TAKE THE STRESS OUT OF MOVING YOUR CARAVAN! Parking, hitching or de-hitching a Caravan can be stressful, especially in tight spots. It can also be costly if you get it wrong and damage the Caravan.

SOLVE THE PROBLEM. Remote control Caravan Movers use powerful hi-torque 12 volt remotely controlled motors that attach to the chassis and act on the tyres with friction rollers giving precise control over the Caravan‟s movement which you control via a remote handset.

Camec has a range of Purple Line Caravan Movers

specifically designed to remotely manoeuvre Caravans

Purple Line is a leading world

manufacturer of remote Caravan Movers.

Purple Line has Remote

Caravan Movers models available for single and dual axle caravans up to 3.5 tonnes

PRODUCT INFORMATION—PURPLE LINE CARAVAN MOVERS

Purple Line Caravan Movers enable the user to manoeuvre a Caravan via remote control to hitch, de-hitch or

park the Caravan into a tight spot. They take the stress out of these highly demanding manoeuvres and the risk of damage to the Caravan.

Purple Line Caravan Movers consists of two models each with 2 powerful hi-torque 12 volt electric motors, a 12

volt electronic control unit and remote control handset and installation hardware. The motors attach to the chassis via means of a bracket and work through a direct drive reduction gearbox connected to solid friction rollers which act through across actuation device to drive both wheels on the Caravan which provides precise control over the Caravan‟s movement

In a dual configuration (2 motors) both units are capable of moving a Caravan of up to 2.25 tonne and in a quad

configuration (4 Motors) both units can move a Caravan up to 3.5 tonne on a flat surface. Note; the quad configuration can result in some reduction in manoeuvrability upwards of 2.5 tonne

Both units are covered by a 2 year parts warranty from date of sale and life time guarantee on the rollers.


8-12

FEATURES AND BENEFITS:

Best in class and TUV Approved.

Corrosive resistant materials.

Direct drive gearboxes.

Solid cast alloy rollers for superior grip and

durability

Cross actuation allows both rollers to be engaged

or from either side of the caravan.

Heavy duty design for Australian single and dual

axle caravans

Low current and battery indicator

High current and temperature warning light

2 Year parts warranty.

SAFETY BENEFITS

Isolation switch to prevent accidental use of remote.

Unique 2 button switch on handset to prevent

accidental activation

ECU will switch off automatically if no button is

pressed within 60 seconds

ECU will switch off automatically if the mover is

working constantly in one direction for longer than 3 minutes

Built in motor overload protection (current and

temperature)

Automatically braked immediately the remote

buttons are released

Specifications:

Suitable for single and dual axle caravans

Kit includes 2 Power Units, Electronic Control Unit,

Remote Control Handset and Cross Actuation Device.

Constructed with high tensile steel.

Weight: 40kgs

Dimensions: 1800mm x 2500mm

Maximum power output: 495kg

Efficiency under load: 84 Amps

Pulling power of 2.25 tonne on flat ground

Safely power a 1.5 tonne Caravan on gradients up to

1:4 004341 Enduro

Specifications:

Suitable for single and dual axle caravans

Kit includes 2 Power Units, Electronic Control Unit,

Remote Control Handset and Cross Actuation Device.

Constructed with anodised high strength alloy.

Weight: 37kgs

Dimensions: 1800mm x 2500mm

Maximum power output: 585kg

Efficiency under load: 76 Amps

Pulling power of 2.25 tonne on flat ground

Safely power a 1.5 tonne Caravan on gradients up to

1:4 004342 E-go

E-GO - ENGAGING THE ROLLERS (Optional Extra) E-go uses a „wind-on‟ method to move the rollers onto the tyres. The advantages of the „wind-on‟ method is that it allows the operator to adjust the pressure of the rollers on the tyres relative to the pressure in the tyres or the amount of friction required to move the caravan. The benefit of this is that it can be useful where manoeuvring the Caravan up gradients and for heavier caravans. E-go is also available with an electric engagement system where the roller engages the tyres with the push of a button, eliminating any human effort. 004343 E-go Auto Engage

E-GO AUTO

ENGAGE


8-13

STAY PUTS 000036 (0553-101) Horizontal 000037 (0553-111) Vertical NOTE: LIMITED STOCK AVAILABLE

BALL BEARING SLIDERS Closed Dimension 450 L x 45 H mm Overall Max Length 925 mm (Max Extension 475mm) 003237 (SA3630-003) Zinc Sliders (PAIR) **Other Sizes Are Available on Request**

The Power Gear room slide out system in your RV, Motorhome or Horsetruck is designed to give you years of trouble-free operation and reflects the latest state of the art technology. It is a rack and pinion design operated by a 12volt high powered electric motor. Features: Inner and outer rail assemblies to support the room weight, 12volt motor for on-board operation, manual override in event of an emergency, Load sensing control unit. Seal Kits Now Available on Request Specifications: Rail can support 545kgs at 90cm extension. Maximum distance between rails is 380cm. Max room with this width is 760cm. 001733 (SA1460) Dual rail slide out Kit

Power Gear - Room Slideouts

BONNET CLAMP - STRAIGHT Roof clamp that has a straight fixing bracket. Includes securing clip 000373 Chrome INDENT

BONNET CLAMP - BENT This version of the bonnet clamp features an offset fixing bracket. Includes securing clip 000374 (5301-006) Chrome

1kg DRY POWER FIRE EXTINGUISHER Safety is paramount in all Motorhomes, Caravans and Boats these days. Feel protected 24/7. Includes a plastic wall mounting kit. Suitable for flammable liquids, electrical, LP Gas, wood and paper. 000014 1kg Dry Powder Extinguisher 000015 Optional Metal wall mounts 000016 Optional Recessed Box


8-14

STANDARD PUSH LOCK KITS Door thickness

003290 (SA381K) Nickel plated 13mm 001412 (SA1379K) Nickel plated 16mm 001417 (SA1381K) Nickel plated 19mm 003292 (SA382K) Brass plated 13mm 001415 (SA1380K) Brass plated 16mm 001419 (SA1382K) Brass plated 19mm MINI PUSH LOCK KITS 000362 (5151-704K) Nickel plated PUSH LOCK - DOUBLE SIDED Operated from both sides. Includes lock, rosette, 2 knobs Door thickness 001425 (SA1387K) Brass plated 13mm 001427 (SA1388K) Brass plated 16mm 001428 (SA1389K) Brass plated 19mm 001433 (SA1390K) Nickel plated 13mm 001435 (SA1391K) Nickel plated 16mm 001437 (SA1392K) Nickel plated 19mm STRIKER PLATES 001422 (SA1385) Recessed Plate 001423 (SA1386) “L” Surface Mounted Plate

SELF CLOSING HINGE - 150DEG Concealed catch with spring. 002719 (SA2250) Nickle plated

OVERHEAD CABINET DOOR HINGE 90DEG 002720 (SA2252N) Nickle plated

CARAVAN - DOUBLE SPRING SA2254 Nickle plated (90 degree)

HO25 CUPBOARD CATCHES Similar to Push Locks. Self locking. 000351 (5151-210) Gold Kit 000352 (5151-211) Chrome Kit

FIRMOTOP STAY 130mm, chrome finish cupboard stay-up. Spring pressure supports the flap when raised and holds it firmly against the cabinet when closed. One or two stays are required depending on weight of flap 000345 (5141-032) Chrome

CUPBOARD STAY-UP A strong, spring loaded stay ideally suited for supporting top hinged overhead cupboard doors in the open position. 000344 (5141-031) Brown

003287 (SA381-002) Push Lock Knob Brass 003288 (SA381-003) Push Lock Knob Nickel 003289 (SA381-004) Push Lock Catch 001411 (SA1379-001) Rosette 16mm Nickel 001414 (SA1380-001) Push Lock Rosette 16mm Brass 001416 (SA1381-001) Push Lock Rosette 19mm Nickel 001418 (SA1382-001) Push Lock Rosette 19mm Brass 003286 (SA381-001) Push Lock Rosette 13mm Nickel 003287 (SA382-001) Push Lock Rosette 13mm Brass


8-15

ROTARY VENT - DIAMETER 235MM 000499 (8018-100) Complete plastic vent

VECAN GRAB HANDLES Attractive Plastic Grab Handle 000336 (5121-016) Grey 000339 (5121-017K) White

ALUMINIUM ROOF COWL 000504 (8031-001) Small Fixing flange 145mm Aperture cut out 75mm 000505 (8031-002) Insert to suit 000506 (8031-006) Medium Fixing flange 190mm Aperture cut out 125mm 000507 (8031-007) Insert to suit 000508 (8031-011) Fixing flange 240mm Aperture cut out 165mm 000507 (8031-007) Insert to suit

STEP / GRAB HANDLE Heavy Duty. Can be used as a step or as a grab handle L 165mm x H 45mm 003235 (SA3630-001) Black 003236 (SA3630-002) White

LARGE PLASTIC VENTS 260mm x 125mm 001027 (SA1086) Black 003500 (SA4690-001) White SMALL PLASTIC VENTS 200mm x 100mm 003778 (SA780) Black

GRAB HANDLE Stainless steel 316 Heavy Duty

Model A mm B mm C mm

002948(SA2759)

305 45 39

002947 (SA2758)

406 45 39

MULLER VENT Venturi technique extracts air from this plastic vent, even while RV is stationary. 285 L x 185 W 000498 (8018-001)

WEATHERPROOF CABLE COVERS 003810 (SA8025) Small (1) 9mm Height (2) 15mm Length 003464 (SA4490-011) Large - As used in the Winegard RM46K - Screws included - 105 x 105 mm External measurement

1 2

DOOR STOP Width 75mm Height 75mm 000945 (SA1009)


8-16

TABLE PEDESTAL - LIGHT DUTY COMPLETE WORKING HEIGHT 670MM Chrome plated steel tube, aluminum bases. 003314 (SA400K) Comprises of: 1 x 003308 (SA398), 1 x 003306 (SA397), 1 x 003305 (SA396) 003302 (SA389) Base Plug

003308 (SA398) 700mm leg Chrome plated steel tube.

003306 (SA397) Recessed connection

003305 (SA396) Conical connection

TABLE PEDESTAL - HEAVY DUTY COMPLETE WORKING HEIGHT 700MM Brushed aluminium tube, aluminium bases. 003634 (SA617K) Comprises of: 1 x SA1393, 1 x SA618, 1 x SA618T

TABLE PEDESTAL - MEDIUM DUTY COMPLETE WORKING HEIGHT 650MM Brushed aluminium tube, aluminium bases. 003631 (SA615K) Comprises of: 1 x SA1392, 1 x SA616, 1 x SA616T


003633 (SA616T) Conical connection


003636 (SA618T) Conical connection

001436 (SA1392) 700mm leg O.D. 55mm

001438 (SA1393) 740mm leg O.D. 80mm

004323 700mm reducible leg. Made of sturdy and anodized aluminium. Comes with 2 joint plastic caps


8-17

REMOVABLE TABLE BRACKET Made of 2mm thick stainless steel. 1x Set consists of 4 pieces L 86mm W 52mm H 70mm 003767 (SA749)

ADJUSTABLE TABLE PEDESTAL Swivels 360 deg. Height 550-810mm. Base diameter 220mm. Upper plate 220 x 220mm. 001381 (SA1336)

TABLE PEDESTAL ADJUSTABLE & REMOVABLE Stowable table pedestal, telescopic, swivels 360deg. and one hand adjustable. OD 80mm. Max Height 830mm Min 470mm 001382 (SA1338)

„V‟ TYPE TABLE LEG 000322 (5055-061) 710mm leg Replacement part 000327 (5055-801-01) plastic foot

TABLE SLIDE KIT - WALL MOUNTED (Above) Set consists of: 2 brackets, 1 length alloy track– 950mm, 2 end plugs. 000333 (061-301) BI-FOLD TABLE LEG (Right) Bi-folds in the centre to act as a bed base. 000324 (5055-071)

TRIPOD STAND New reinforced and more stable tripod to carry the table outside. It‟s standard delivered with anti-closing device. Made of UV resistant plastic material. 004338

Star Folding Table Leg - 675mm High - Heavy Duty Leg - Folds at top of Leg Joint 000901 (S-5055-080) Star Folding Table Leg

Base Above Requires A Recess of 65mm

FOLDING TABLE BRACKET Extends any bench top. Sold Individually - Recommended 2x per table top. L 86mm W 52mm H 70mm 000342 (5141-019)


8-18

MANUAL OPERATION STEP Easy operation due to swing–out action. Galvanized steel frame with aluminium step. Waterproof switch can be used to indicate position of step. 001362 (SA13082) 001519 (SA14091) End caps

295mm

550mm

270mm

235mm

This new series of manual and electric steps merges state-of-the-art technol-ogy with expertise gathered over decades. Steps are made from hot-galvanised steel and feature convenient foot-boards made from silver-anodised aluminium section equipped with safety side guards. All electric steps come complete with wiring for guaranteed trouble-free motor operation and user-friendly installation with just a few connections needed.

001227 (SA12897) Single 12v Electric Step Weight 7.4 kg 538mm Step Board 235mm Mounting Point 197mm Drop to top of step 180mm Closed

001228 (SA12898) Double 12v Electric Step 560mm Step Board Weight 10.5 kg

001229 (SA12899) Double 12v Electric Step 450mm Step Board Weight 10 kg

ELECTRIC STEPS

CHROME SWING AWAY TABLE LEG 38mm diameter chrome plated tube. Components shown above. Height 740mm, off-set 220mm 000312 (5055-041) Kitset

000314 PLATE

000313 TUBE

000315 COLLAR

000316 FLOOR FLANGE

000315 COLLAR

000316 FLOOR FLANGE

000320 PLATE

000321 LEG


BREHA SWING AWAY TABLE LEG 38mm diameter Chrome plated tube Components shown above. Height 725mm, off-set 245mm 000319 (5055-048) Kitset

8-19

SINGLE PULL-OUT STEP Can be bolted or welded to floor. 002599 (SA2001) Width 630mm 002602 (SA2007) Width 510mm

DOUBLE PULL-OUT STEP Can be bolted or welded to floor 002600 (SA2002) Width 630mm 002603 (SA2008) Width 510mm

190mm

425mm

305mm

640mm

150mm

170mm

215mm

170mm

RV STEP - REINFORCED MATERIAL It is advisable to use pegs to secure the step to the ground. W 500mm D 350mm H 230mm 003298 (SA386) Grey

Folding Aluminium Step Compact step for caravans and motorhomes. Innovative system with folding legs for easy storage. When legs are open they make the step very stable and sturdy. Carries up to 200kg. Large anti skid surface. Closed Dimension: W 455mm D 336mm H 38mm Open Dimension: W 455mm D 336mm H 210mm 002587 (SA1993) Folding Step

TRIPLE PULL-OUT STEP Can be bolted or welded to floor. Extended the total height is 470mm. 002601 (SA2003) Width 670mm

660mm

330mm

305mm

130mm

MAGNUM STEP Step Size (mm): 455L x 275W x 235H Overall (mm): 575L x 395W x 235H Approved to hold 200kg 003299 (SA386M) Grey


8-20

ACCESS HATCHES Overall dimensions 002738 (SA240) 385mm x 285mm (O.D) 310mm x 210mm (C.O) 002742 (SA241) 605mm x 355mm (O.D) 530mm x 280mm (C.O) 000075 (20.291.00) 380mm x 280mm (O.D) 310mm x 210mm (C.O) 000076 (20.292.00) 605mm x 355mm (O.D) (4 hinges)

530mm x 280mm (C.O) 000077 (20.293.00) 375mm x 375mm (O.D) 300mm x 300mm (C.O) 000078 (20.294.00) 520mm x 465mm (O.D) 445mm x 390mm (C.O) 000509 (8041-506) 370mmx 270mm with lock (3 hinges, Lockable) 002754 (SA245) Key Lock Kit

ACCESS HATCH WITH LINER 002746 (SA243) 185mm x 285mm x 200mm 002747 (SA244) 250mm x 500mm x 300mm 002754 (SA245) Key lock kit

POWER LEAD BOX Suitable for 240 volt power lead. W 420mm H 210mm D 210mm 001050 (SA1099) Power Lead Box SPARE PARTS 001054 (SA1099L) Lock Replacement. Suitable for: 001050 (SA1099) / 001044 (SA1097) / 001155 (SA1221) 001052 (SA1099K) Key Replacement. Suitable for: 001050 (SA1099) / 001044 (SA1097) / 001155 (SA1221)

LOCKABLE POWER CABLE DOOR Door has small swing away panel for cable exit. 002734 (SA2351) W 195 H 165 D 38mm

FLAT CANOPY LIFTER Spring loaded steel canopy lifters used to raise roof on pop top caravans and campervans 000376 700mm 000377 900mm 000378 1200mm

STAINLESS STEEL HINGES

STAINLESS STEEL

CARAVAN STABILISER A fabricated steel corner stabilizer which engages the winding handle at the same end as the foot. Suits slotted style jack handle. 000282 (4051-201) 410 - 610 Extension 000284 (4061-002) 550mm Long Winder

THETFORD ACCESS HATCH 002486 (SA1890) C/O Dim: 630mm x 330mm Door 4 002494 (SA1891) C/O Dim:730mm x 280mm Door 5 002497 (SA1892) C/O Dim: 980mm x 400mm Door 6 003864 (SA879) Hatch to suit Thetford cassette toilet 002407 (SA1840) Lock Key & Barrel 002526 (SA1910) Lock & Key for SA879SN

LPG GAS BOTTLE LOCKER 001044 (SA1097) Suitable for 9Kg bottle W 420mm H 590mm D 345mm (C.O) 001155 (SA1221) Suitable for 4.5Kg bottle W 340mm H 490mm D 310mm (C.O) 001052 (SA1099K) Key (001155 (SA1221))


8-21

OMNI STOP An innovative yet simple accessory, ideal for keeping plates and items in place as you travel. 250mm High - 200mm Handle Use Vertically or Horizontally. 002301 (SA1687) Omni Stop

MINI DISH DRAINER WHAT A PERFECT SOLUTION TO ANY MOTORHOME , CARAVAN, BOAT or EVEN SUITABLE TO USE AT HOME! Fits RV and Marine sinks. Dishwasher safe. Durable heavy-duty construction. Space saving and can be used for storing all the kitchen necessities. 8 plates, 6 Cups and Utensil holder. 23.5cm D x 29.5cm L x 11.5cm H 003238 (SA3630-006) Mini Dish Drainer

“T” Bubble Level 000017 (0029-010)

TOP SELLNG!

CAMEC PICNIC TABLE

Suits most RV vehicles

Australian Made

Externally mounted

Size: W800mm x H450mm x D40mm

Lockable fold down table

Stainless steel stays and hinges

Maximum load 20kg

Camec One Key Fits All barrel housing

Easy clean surface

Easy to install 004325 Folding Picnic Table

KIT INCLUDES: 12 of 8 gauge button head screws 12 of 5-3 aluminium rivets 12 of 3/16 bulbex rivets Foam Tape Plastic back plate Folding table panel


8-22

CROCKERY & PLATE HOLDER W 545mm D195mm H 90mm 000956 (SA1020) NOTE: LIMITED STOCK AVAILABLE

CUTLERY TRAY W 225mm D 357mm 000961 (SA1025) NOTE: LIMITED STOCK AVAILABLE

SLIDE-OUT PANTRY

Supplied with two chrome baskets and complete fixing frame and slider. H 570mm D 515mm Depth fully extended 955mm 000005 (0007-121) 110mm Wide Baskets 000008 (0007-131) 200mm Wide Baskets 000007 (0007-124) 110mm Spare Baskets 000009 (0007-134) 200mm Spare Baskets

NOW AVAILABLE 730mm HIGH PANTRY SLIDER

3 CHROME 200mm WIDE BASKETS

000900 (S-0007-150) 730mm High Pantry

PERSONAL EFFECTS SAFE Approved to safety level A W 255 H 152 D 200mm 003980 (SA994)

Note: Door panel and push lock not included

Brackets in baskets


8-23

MOSQUITO NET Assembled and weighted panels of insect screen material. Slides into track provided with adjustable height. 001876 (SA15040) W 640mm (2 panels) Height 2 metres

DRIP STOP The gutter is made of poly vinyl reinforced with aluminium strips. Complete with self adhesive acrylic foam. 002342 (SA1802) Width 750mm 002343 (SA1803) Width 3 metres

DRINK HOLDER 003761 (SA742N) Black 003762 (SA742W) White

CLIP ON CAR MIRROR 000031 (0136-016) Pair

SLIP STOP Supplied in rolls 300mm wide, 3.6 metres long. 003883 (SA911) Cream 003884 (SA911BL) Blue

STAINLESS STEEL TOASTER Comfortably fits onto any stove burner 001157 (SA1226S) Retail Pack

4x4 CLIP ON MIRROR Larger vehicles mirrors 000030 (0136-012) Single

FENDER MOUNTED REAR MIRROR Large 126mm x 260mm black powder coated mirror head with adjustable wide viewing area. Aluminium tubing requires little maintenance to retain original appearance. Left/right hand threaded turnbuckle provides positive attachment 000033 (0138-001) Pair

STOWAGE POCKET Made of ABS plastic. Self adhesive strip provided. H 165mm W 260mm D 80mm 003606 (SA554) White H 88mm W 260mm D 80mm 002586 (SA199) White 002595 (SA199G) Grey


8-24

CAMEC TOWING MIRROR SUCTION FITTING

Universal Fitting

Adjusts with Vehicles Power Mirror

Installs in seconds

Flat Glass

Storage bag included 040656

CAMEC CLIP ON TOWING MIRROR

Universal Fitting

Quick and easy to fit

Aerodynamic and durable

Supplied with straps for added security

Storage bag included 040657

CAMEC WHEEL LEVEL & CHOCK KIT

Manufactured from tough polypropylene plastic for superior strength. Max 5 Tonne.

Anti-slip plate clips onto the leading edge of the Level Ramp

Wheel Chock locks into ridges of the Level Ramp and secures the wheel safely in place.

Level Ramp has a solid base which means that it will not sink into soft ground

DIMENSIONS: Level Ramp: L520mm x W200mm x H125mm Chock: L150mm x W120mm x H100mm Anti-slip Plate: L155mm x W100mm x H5mm 040652

CAMEC WHEEL CHOCK

Manufactured from tough polypropylene plastic for superior strength.

Can also be used with Camec Wheel Level 040653

CAMEC TYRE SAVER

Prevents flat spots

Suitable tyre diameters 10”-20”

Tyre Savers can be interlocked side by side for wider tyres.

Can still be used with most makes of wheel clamp.

Ideal for use as a „stop‟ by bolting down to a garage floor

Suitable for use with caravans, trailers, prestige cars or any vehicle that isn‟t moved for long periods.

040654


8-25

LEVEL SYSTEM ® Keep your motorhome perfectly leveled for improved operation of the equipment when parked on uneven ground. With a rigid surface to grip the vehicles tires. Lightweight, compact and made in rust-proof material, easy to clean and UV-resistant. Will not crack or break like wood. Non-skid finish and practical self-locking overlap system that can raise the height (if required). Sold in Pairs

Keep your motorhome or caravan perfectly leveled for improved operation of equipment when parked on an uneven surface. Ridged surface to grip to the vehicles tires. Lightweight and made in rust proof material, easy to clean and UV-resistant. Will not crack or break like wood. Non-skid finish.

001119 (SA1191) MAGNUM 001375 (SA13087) Level Up Plus 8 Tons Max Axle Weight 001120 (SA1192) JUMBO

14 Tons Max Axle Weight

001660 (SA1422) CHOCKS FOR LEVEL SYSTEM Suitable for 001119 (SA1191) Magnum Only

003983 (SA995) CARAVAN STABILIZER PLATES 4 Reinforced Anti-Sinking Plates, Diameter 200mm

001375 (SA13087) MULTI LEVEL UPS 5 Tons Max Axle Weight


8-26

Camec Premium Plus Camper Trailer, Caravan and Pop-Top Covers have been designed and manufactured to protect your van from being exposed to the harsh climatic conditions. Premium Plus Protection - the cover will provide excellent protection against acid rain, industrial pollutants, tree sap, bird dropping, dust and weather damage caused by leaving your van uncovered whilst exposed to the weather. Premium Plus Quality - specially manufactured using a composite of three materials comprising a 100% waterproof roof section for maximum protection, weather resistant breathable side panels which allows the cover to breathe and moisture to evaporate resisting rot and mildew and a heavy duty reinforced skirt and an elasticised hem front and rear providing a strong guard against damage from sharp objects. Premium Plus Practicality - incorporated into the complete range of Camec Premium Plus Covers. They are lightweight and easy to fit.

Features

100% Waterproof UV Stabilised Roof Section

Water Resistant Breathable Side Panels

Reinforced Skirt with dual nylon clips

Double Stitched Reinforced Corners

Soft Non Abrasive Lining

CAMEC PREMIUM PLUS CARAVAN COVER Features include a three zipper side panel that offers simple access to doors in any location and with bonus eyelets sewn into the hem it easily converts into a handy sun awning. 039569 C16CCV 14‟-16‟ (4.3m-4.8m) 039570 C18CCV 16‟-18‟ (4.8m-5.4m) 039571 C20CCV 18‟-20‟ (5.4m-6.0m) 039572 C22CCV 20‟-22‟ (6.0m-6.6m) 039573 C24CCV 22‟-24‟ (6.6m-7.3m)

CAMEC PREMIUM PLUS POP TOP COVER Features include a three zipper side panel that offers simple access to doors in any location and with bonus eyelets sewn into the hem it easily converts into a handy sun awning. 039574 C14PCV 12‟-14‟ (3.7m-4.3m) 039575 C16PCV 14‟-16‟ (4.3m-4.8m) 039576 C18PCV 16‟-18‟ (4.8m-5.4m) 039577 C20PCV 18‟-20‟ (5.4m-6.0m)

CAMEC PREMIUM PLUS CAMPER TRAILER COVER Features include four reinforced tabs with eyelets at both the front and rear with cord supplied so that the cover can be made nice and taught ensuring it is securely fastened for all weather conditions 039581 C12CTCV 10‟-12‟ (3.0m-3.7m) 039582 C14CTCV 12‟-14‟ (3.7m-4.3m) 039583 C16CTCV 14‟-16‟ (4.3-4.8m)

Premium Plus Covers


8-27

AWNING PRIVACY SCREEN

90% Shade & UV Block providing ultimate sun protection

5mm Spline fits Roll-out Awnings and Box Awnings.

Stainless Steel D-Rings stitched to re-enforced tabs across the bottom edge for securing. (ropes and pegs not supplied)

Monofilament & Tape lock-stitched knitted for strength and durability. Mass: 230gsm

Ultraviolet Protection Factor (mean) Range: 13-41 AS/NZS 4399.

Steel Grey - Subtle colour blends with any colour awning. 040010 Camec Privacy Screen 2.8m x 1.8m 040011 Camec Privacy Screen 3.1m x 1.8m 040012 Camec Privacy Screen 3.4m x 1.8m 040013 Camec Privacy Screen 3.7m x 1.8m 040014 Camec Privacy Screen 4.0m x 1.8m 040015 Camec Privacy Screen 4.3m x 1.8m 040016 Camec Privacy Screen 4.6m x 1.8m 040017 Camec Privacy Screen 4.9m x 1.8m

AWNING PRIVACY SCREEN END POP-TOP


Velcro hook & loop tabs x 4 across top edge for securing to upper arm brace of roll-out awning




Steel Grey - Subtle colour blends with any colour awning. 040000 Camec Privacy End Pop Top 2.1m W x 1.8m H

Privacy Screens


8-28

AWNING PRIVACY SCREEN END CARAVAN


Velcro hook & loop tabs x 4 across top edge for securing to upper arm brace of roll out awning.




Steel Grey - Subtle colour blends with any colour awning. 040001 Camec Privacy Screen End Caravan 2.1m W x 2.05m H long edge x 1.8m H short edge

CAMEC OUTDOOR FLOOR MATTING

Designed specifically to keep dirt, mud & sand from being walked into your Caravan, RV or Tent.

Great for picnics and any outdoor event.

Multilayered matting construction provides superior comfort underfoot.

Open mesh floor matting will not kill grass and is preferred by all Caravan Parks.

Edges bound by heavy duty webbing with brass eyelets for pegging down

040387 Camec Floor Matting 3.0m x 2.5m 040388 Camec Floor Matting 4.3m x 2.5m 040389 Camec Floor Matting 5.0m x 2.5m 040390 Camec Floor Matting 6.0m x 2.5m 040391 Camec Floor Matting 7.0m x 2.5m


160 - Marine & Motorhome · 8-1 These compact vents are a small version of the 400x400 Vent 160....

Documents

Transcript of 160 - Marine & Motorhome · 8-1 These compact vents are a small version of the 400x400 Vent 160....