1.5M/E Video Production Switcher VPS-715 1.5M/E GINGA · VPS-715 is a 1.5M/E analog/digital mixed...
Transcript of 1.5M/E Video Production Switcher VPS-715 1.5M/E GINGA · VPS-715 is a 1.5M/E analog/digital mixed...
*Touch panel display is optional
1.5M/E Video Production Switcher
1.5M/E Video Production Switcher
VPS-715 "1.5M/E GINGA"
VPS-715 "1.5M/E GINGA"
All inputs have independent 2D DVEs (option), making it equivalent to a monstrous 32-channel DVE.
Mix/Effect (M/E) transitions are combined by two independent pre-combiners, and two-channel combined
outputs can be assigned to the PGM and PST buses. This means that all videos that are input to the
switcher can be combined and displayed at one time. This video representation delivers dramatic impact
unattainable with previous video switchers.
� Multi Layer & Multi DVE
Another Big BangVPS-715 is a 1.5M/E analog/digital mixed video switcher. The VPS-715 features the same functions and
concept of the VPS-700 in a 1.5M/E configuration. The easy-to-use control panel and various functions
enable efficient operation.
All inputs in the VPS-715 include a frame synchronizer (FS) that enables asynchronous input. It also features a freeze frame function using FS memory and still store, can display video captured by M/E as still video for each input, and can display CG images that were created elsewhere. Basic input includes eight SD-SDI channels, and SDI input or analog input are also available as an option. As a digital/analog mixed switcher, the VPS-715 supports expansion up to 16 inputs. Basic output provides a total of eight channels: two PGM channels, PREV, Clean, M/E PGM, M/E PREV, and two AUX channels. Available options include eight SDI outputs (in four-output units) or four analog outputs (in two-output units for composite). The PREV and Clean output channels can also be used as KEY OUT, and the AUX outputs including the additional outputs can be freely assigned for enabling output of the required video from a selected terminal.
A standard FS memory is used in the VPS-715 video input for enabling freezing of video. In addition, captured images and CG images saved to the internal storage can be assigned to two M/E bus buttons as still images separate from the input video.
� Analog/Digital Mixed Switcher2D DVE functions are added to all 16 inputs. The position, size and rotation of each input can be adjusted, borders can be added, and the transparency can be set. The input DVE card has a pre-combiner function where inputs can be assigned as an M/E bus or key source. Also, up to 2 cards can be installed for enabling transitions to another image from each card's combined output image.
� Input DVE Card (Pre-combiner)
The main unit includes up to 16 inputs and 16 outputs, FS function, still stores, Proc Amp, clip function, DVEs, keyers, and a variety of other functions all in a 3 RU-size unit. Support for a redundant power supply is also standard in the main unit and control panel of VPS-715.
� Compact Main Unit
The VPS-715 incorporates an Mix/Effect (M/E) bus that enables cut, mix, wipe, and DVE transitions. A Program/Preview (P/P) bus is also included for allowing cut and mix transitions in later stages.
� 1.5M/E Bus
� Powerful Still Store Functions
A process amplifier and white clip function are provided for each input as standard. This enables levels and other adjustments within the switcher without the need for peripherals.
� Proc Amp/Clip Function
� 6 Keyers
VPS-715 Main Features
VPS-715 main unit
VPS-715 control panel
6 keyers are available in the standard configuration, and 4 keyers can select from cut, mix, wipe, and DVE transitions. The 2 DSKs enable cut and mix transitions. All keyers incorporate chroma keys using the 4:4:4 process and can perform masking with wipe patterns, edge and shadow effects, and key channel effects with assigned DVEs.
VPS-70FR flash recorder card (option) can be used to enable recording and playback of uncompressed SD video. Up to two cards can be installed (the slot is shared with the VPS-70DS). A single card enables a maximum recording time of 120 seconds and simultaneous playback of video with key channel for two channels. Various types of playback are also supported, including regular playback, reverse playback, loop control, and trigger control. In addition, recorded video is stored in memory so that it remains saved even when the power is turned off. This eliminates the need to reload at each startup.
� Flash Recorder Function
In addition to the DVEs provided for each input channel, the VPS-715 also provides 6-channel 2.5D DVEs. The addition of a 3D warp module option enables usage of Ripple, Swirl, Slats, Page Turn and a wide variety of other warp effects and a total of 12 lighting effects. The result when combined with the input DVEs will even surpass your imagination.
The control panel was designed for optimal ease of operation with 16 bus buttons, direct access buttons for various functions, a 3-axis joystick, parameter display, and other controls arranged in an easy-to-use layout. A convenient touch panel controller (option) is also available.
� 16-Button Control Panel
� 6-channel 3D DVEs
- 4 matte generators
- USB 1.1: 1 port on operation unit for support of memory devices (up to 2GB)
- Enables saving of 100 patterns of sequences containing 31 settable key frames
- 96-event memory can be recalled using 8 pages x 12 direct buttons
- Incorporates 3-serial port for control and other operations from an editing device
- Free assignment of 8 GPI inputs and 24 tally outputs
� Other Features
� Block Diagram
OptionsVPS-70SDI: 4-input Digital Expansion CardEach card enables an additional 4 SD-SDI inputs. It incorporates a frame synchronizer, still store, and process amplifier functions. Up to 2 cards can be installed.
VPS-70AI: 2-Input Analog Expansion CardEach card enables an additional 2 analog composite inputs or 1 analog composite input and 1 analog component input. It incorporates a frame synchronizer, still store, and process amplifier functions. Up to 4 cards can be installed.
VPS-70AO: 2-Output Analog Expansion CardEach card enables an additional 2 analog composite outputs, or 1 analog composite output and 1 analog component output, or 1 RGB output. It also enables free assignment of outputs. Up to 2 cards can be installed.
VPS-70SDO: 4-output Digital Expansion CardEach card enables an additional 4 SD-SDI outputs. It also enables free assignment of outputs. Up to 2 cards can be installed.
VPS-70WARP: DVE Warp Engine FunctionThis option adds warp effects to the installed standard DVEs that are separate from the DVEs added by the Input DVE Card
VPS-70DPUIF: Display InterfaceThis is a software package for connecting an external display to the VPS-715. It is required when connecting the VPS-70DPUA Touch Panel Display.
VPS-70DS: Input DVE Card (Pre-combiner)This option adds DVE functions to each input. It features a 16-channel DVE and 2-channel combiner. Up to 2 cards can be installed.
VPS-70FR: Flash Recorder CardA single VPS-70FR flash recorder card enables playback of video with key channel for two channels. Up to two cards can be installed (the slos are shared with the VPS-70DS, and so a total of 2 of both cards can be installed.)
HVS-AUX8/16/32: 8/16/32-button AUX control panelUp to 32 inputs are manageable. Connect up to 10 units with customizable assignment for each panel.
HVS-AUXRK: AUX Panel Extension KitThis kit enables separation and extension of the HVS-AUX8RK, HVS-AUX16 or HVS-AUX32 panel. Extension is possible up to 5 meters.
VPS-70DPUA: Touch Panel Display UnitThis option enables touch panel control of the various functions of the VPS-715. It presents the multi-layer and multi-DVE functions in an easy to understand and easily accessible operation.
PGM
PREV
DSK1 F/K
DSK2 F/K
Key1 F/K
Key2 F/K
Key3 F/K
Key4 F/K
Wipe Border
In1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Matte/Black StillFS/Still FS/Still
Aux1
Aux2
Aux3
Aux4
Aux5
Aux6
Aux7
Aux8
Aux9
Aux10
[Slot1] DVE-Sub (Pre-Combiner) or Flash Recorder[Slot2] DVE-Sub (Pre-Combiner) or Flash Recorder
Comb-A F/KComb-B F/K
LinearKeyer
ChromaKey
SubEffects Mask
DVERouter
DVEx6ch
WarpEngine
KeyEdge /ShadowProcess
TrailProcess M/E
Wipe / Mask Generator
FTB PGM2
PGM1
PREV
Clean
M/E PGM
Aux2
Aux3
Aux4
Aux5
Aux6
Aux7
Aux8
Aux9
Aux10M/E
PGMM/EPREV
Option
Aux1
M/E PREV
M/E A
M/E B
FinalMixerwithDSKx2ch
VPS-70DPUA: Touch Panel Display Unit
VPS-715 control panel
1
2
3
4
(10/100BASE-T)
LAN
AUX1SDI OUT
752 6 81 43
21
BB OUTGENLOCK IN
SDI IN
PREV AUX2CLEAN PGMPGM2
P/P M/E
PREVPGM1
AC100 - 240V 50/60Hz IN1
REMOTE
4
3
2
1RS-422
2 EDITOR
2
1
1
2
3
4
(10/100BASE-T)
LAN
SDI OUT
752 6 81 43
21
BB OUTGENLOCK IN
SDI IN
AC100 - 240V 50/60Hz IN1
REMOTE
4
3
2
1RS-422
2 EDITOR
2
1AUX1PREV AUX2CLEAN PGMPGM2
P/P M/E
PREVPGM1
VPS-715VIDEO PRODUCTION SYSTEM
POWER 1
POWER 2
ON
OFF
ON
OFF
40 350 40
430
480
57132
42540 345 40 45
1
2
3
4LAN
AUX1SDI OUT
752 6 81 43
21
BB OUTGENLOCK IN
SDI IN
PREV AUX2CLEAN PGMPGM2
P/P
PREVPGM1
AC100 - 240V 50/60Hz IN1
REMOTE
4
3
2
1RS-422
2 EDITOR
2
1
M/E
DSKCUT CUT MIXDSK
DSK1 DSK2
AUTO(MIX)
KEY4 AUX9
BLACK12
KEY3
MATT1
KEY2
9
DSK2DSK1
10
MATT2 MATT3 MATT4
11
STILL1
13
STILL2
14
COMB-A
15
COMB-B
16
CLEAN
BUS SELECT
AUX10AUX8AUX7AUX6AUX5AUX4AUX3AUX2AUX1COMB-B
SHIFTPGM
STILL3
PRVW
KEY1 COMB-A
31 2 4 5
MIX(FAM)WIPE
M/ECUT
PRIOR
(NAM)
BKGD KEY1 KEY2 KEY3
DVE
M/EAUTO
SETUPPRIOR
KEY4
M/E
PRESET
PROGRAM
M/E
7
84 6
2 43
BLACK
SHIFT8
53
6
72
BLACK 5
M/E PRESET
M/E PROGRAM
MATT4
SHIFT11
MATT2
11MATT2
14COMB A
15COMB B
9 12 16MATT1
1310MATT3
14COMB A
15COMB B
9 16MATT1
1310MATT3
1
1
KEY/AUX PRE-COMBINER BACKGROUND
1 OVER 2
DSK TRANSITION
TRANSITION TYPE
PROGRAM TRANSITION
PRIORITY / OA TALLY
DVE
OAOA
DVE
DVEDVEDVEDVE
HIGH
1 2 3
321 LOW
1 2 3
3
4
21
12
LIGHTBORDERBASIC USER
DVE
EFFECT
SUBWARP
SEQEVENTLINK
VRSTATUS
SETUPSTILLSYSTEM
FLASH
RECORDER
VR
OTHER
JOYSTICK
M/E FADERKEYER
X
AUTO CK
DVE POS
WIPE POS
DVE ROT
Y
FINEDEFAULT
Z
USB MEMORY
EDGE/SHADOW
GPI
EDITOR
REVERSESEQ LINK NOR/REVFADER LIMITDVEENABLE
EXT SELF MASKCK
STORESEQ
MENU
LOOP RECALL
2 3
DIR
4 5 6
7 8
0
9 -
EVENT
NEW
CANCEL
DELETE
ENTER
INSERT
1
PGMRATE
M/E
BLK
DSK
DSKPRIOR
BLACKTRANS
TRANSITION RATE
STILL2STILL1
STILL2STILL1
72 43 SHIFT86BLACK 5MATT4
11MATT2
14COMB A
15COMB B
9 12 16MATT1
1310MATT3
1STILL2STILL1
72 43 SHIFT86BLACK 5MATT4
11MATT2
14COMB A
15COMB B
9 12 16MATT1
1310MATT3
1STILL2STILL1
MATT4
4
4
4
87
M/E PRVW
DVE
M/E TRANSITION
6
M/E PGM M/E CLN
FILLKEY/
COMB
PRE
F2 F4F3F1
SHUTDOWNSHUTDOWN
F1+F4F1+F4
665
399
40
290
34
8º
162
62
External Dimensions
Operation Unit: External Dimensions Main Unit: External Dimensions
Main Unit: Rear Panel
FOR-A COMPANY LIMITED Homepage:http://www.for-a.com/Head Office : 3-8-1 Ebisu, Shibuya-ku, Tokyo 150-0013, Japan +81 (0)3-3446-3936 Fax : +81 (0)3-3446-1470FOR-A America Corporate Office : 11125 Knott Ave., Suite #A, Cypress, CA 90630, USA +1 714-894-3311 Fax : +1 714-894-5399FOR-A America East Coast Office : 2 Executive Drive, Suite 670, Fort Lee Executive Park, Fort Lee NJ 07024, USA +1 201-944-1120 Fax : +1 201-944-1132 FOR-A America Distribution & Service Center : 2400 N.E. Waldo Road, Gainesville, FL 32609, USA +1 352-371-1505 Fax : +1 352-378-5320FOR-A Latin America & the Caribbean : 5200 Blue Lagoon Drive, Suite #760, Miami, FL 33126, USA +1 305-931-1700 Fax : +1 305-264-7890FOR-A Corporation of Canada : 346A Queen Steet West, Toronto, Ontario M5V 2A2, CANADA +1 416-977-0343 Fax : +1 416-977-0657FOR-A UK Limited : UNIT C71, Barwell Business Park, Leatherhead Road, Chessington Surrey, KT9 2NY, UK +44 (0)20-8391-7979 Fax : +44 (0)20-8391-7978FOR-A Italia S.r.l. : Viale Europa 50 20093, Cologno Monzese (MI), Milan, Italy +39 02-254-3635/6 Fax : +39 02-254-0477FOR-A Corporation of Korea : 801 Dangsan Bld., 53-1 Dangsan-Dong, Youngdeungpo-Gu, Seoul 150-800, Korea +82 (0)2-2637-0761 Fax : +82 (0)2-2637-0760FOR-A China Limited : 708B Huateng Building, No. 302, 3 District, Jinsong, Chaoyang, Beijing 100021, China +86 (0)10-8721-6023 Fax : +86 (0)10-8721-6033
© 2009 FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company Ltd. Design and specifications subject to change without notice. Printed in Japan. 0911FJ2C
SpecificationsNotes on Input Expansion
Notes on Output Expansion
Expansion with one of the VPS-70SDI or VPS-70AI VPS-70SDI: 4 SD-SDI inputs occupies one slot VPS-70AI: 2 composite inputs or 1 composite + 1 component input occupies one slot
The following combinations for the maximum expansion can be made as below. SD-SDI x 8 (STD) + Analog composite x 8 SD-SDI x 8 (STD) + Analog composite x 4 + Analog component x 4 SD-SDI x 8 (STD) + SD-SDI x 4 + Analog composite x 2 + Analog component x 2 SD-SDI x 8 (STD) + SD-SDI x 8*Expansion allows up to 16 inputs. Therefore, if two VPS-70SDI cards are added, the VPS-70AI cannot be added.
The following combinations for the maximum expansion can be made as below. SD-SDI x 8 (STD) + Analog composite x 4 SD-SDI x 8 (STD) + Analog composite x 2 + Analog component x 2 SD-SDI x 8 (STD) + Analog composite x 2 + RGB/SYNC x 2 SD-SDI x 8 (STD) + SD-SDI x 8
Digital/analog input expansion slots
Expansion with one of the VPS-70SDO or VPS-70AO VPS-70SDO: 4 SD-SDI outputs occupies one slot VPS-70AO: 2 composite outputs, or 1 composite + 1 component, or 1 composite + 1 RGB/SYNC output occupies one slot
Digital/analog output expansion slots
Expansion with the VPS-70AI only is possible.
Analog input expansion slots
Standard 525/60 (NTSC), 625/50 (PAL) (Selectable at menu)Processing 4:2:2 digital component, 10-bitVideo Input 8 standard inputs, optionally expandable to 16 inputs Digital component: 270Mbps, 75Ω, BNCVideo Input Refer to right pattern (option) SD-SDI: 270Mbps, 75Ω, BNC Analog component: Y: 1.0Vp-p, B-Y/R-Y: 0.7Vp-p, 75Ω, BNC Analog composite: 1.0Vp-p, 75Ω, BNCReference Input BB: 0.429Vp-p (NTSC)/0.45Vp-p (PAL), 75Ω or Loopthrough, 1 input., BNCVideo Output 8 standard output (PGM x 2, PREV, Clean, M/E PGM, M/E PREV, AUX x 2), optionally expandable to 16 outputs Digital component: 270Mbps, 75Ω, BNCVideo Output Refer to right pattern (option) SD-SDI: 270Mbps, 75Ω, BNC Analog component: Y: 1.0Vp-p, B-Y/R-Y: 0.7Vp-p, BNC Analog composite: 1.0Vp-p, 75Ω, BNC RGB: R/G/B: 1.0Vp-p, 75Ω, BNCReference Output BB: 0.429Vp-p (NTSC)/0.45Vp-p (PAL), 75Ω or Loopthrough, 2 outputs, BNCQuantization Y: 10-bit, C: 10-bit, Key: 10-bitI/O Delay 1H (When FS, edge/shadow and DVE not applied to output) Max. 4 framesInterfaces OU: Ethernet 10/100BASE-T, 1ea., RJ-45 RS-422: 3ea., 9-pin D-sub (female) (one for editor) GPI IN/TALLY: 1ea., 37-pin D-sub (female) (8 inputs / 24 outputs) Temperature / Humidity 5ºC - 40ºC / 30% - 90% (no condensation)Power 100VAC - 240VAC ±10%, 50/60HzConsumption Main unit: 200W Operation unit: 50WDimensions / Weight Main unit: 430(W) x 132(H) x 425(D)mm, EIA3RU / Approx. 18kg Operation unit: 665(W) x 162(H) x 399(D)mm / Approx. 10kgAccessories Main unit: AC cords, Rack mount brackets, Redundant power supply (pre-installed) Operation unit: Operation manual, AC cord (Rack mount brackets are option)Option VPS-70SDI: 4-input digital expansion card VPS-70AI: 4-input analog expansion card VPS-70SDO: 4-output digital expansion card VPS-70AO: 2-output analog expansion card VPS-70DS: Input DVE card (pre-combiner) VPS-70FR: Flash Recorder card VPS-70WARP: DVE warp engine module VPS-70DPUIF: Display interface VPS-70DPUA: Touch panel display HVS-AUX8/16/32: 8/16/32-button AUX control panel HVS-AUXRK: AUX panel extender kit PC-3168-(10m): Connection cable