15”Marvel High Efficiency Single Zone Wine Cellar · 15”Marvel High Efficiency Single Zone Wine...
Transcript of 15”Marvel High Efficiency Single Zone Wine Cellar · 15”Marvel High Efficiency Single Zone Wine...
15”Marvel High Efficiency Single Zone Wine CellarModel # ML15WS****
• Dynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability
• MARVEL Intuit™ Integrated Controls provide precise temperature management from 40°F to 65°F
• Vibration Neutralization System™ protects wine from agitation
• Two-stage, soft white theatre-style LED lighting and midnight black interior
• Thermal-efficient cabinet ensures optimum food preservation and energy efficiency while maximizing capacity
• Tinted, UV-resistant dual pane glass door protects wine from damaging ultra-violet light
• Natural maple shelf fronts are stainable to match cabinetry
• Three-quarter extension roller-glide shelf system prevents jarring
• Close Door Assist System™ gently and automatically closes door
• Panel overlay option features soft-close integrated hinge for a truly flush fit with cabinetry
• Audible and visual alarms signal when door is left ajar to protect wine integrity and energy use
• Vacation/Sabbath mode conserves energy during times when the unit is not in use
• Sleek stainless steel door and designer handle
• Height adjustment up to 1” with leveling legs
• Filler kit available for 18” wide opening, see page 58
• Up to 2x more efficient than leading competitors
• 4” black adjustable toe kick
• 1-year warranty
Storage Capacity
Up to 24 bottles total
Storage Configuration
(6) 4-bottle roller-glide wine racks
Product Dimensions
14⅞” W x 33¾” minimum H x 25⅝” D (including handle)
Finish/Door Options
BlackStainless Steel Wood Overlay(Panel Ready)
Ordering Details
Stainless Frame Glass Door, Right Hinge
ML15WSG1RS
Stainless Frame Glass Door, Left Hinge
ML15WSG1LS
Smooth Black Frame Glass Door, Right Hinge
ML15WSG1RB
Smooth Black Frame Glass Door, Left Hinge
ML15WSG1LB
Panel Overlay Frame Glass Door, Integrated Right Hinge
ML15WSF2RP
Panel Overlay Frame Glass Door, Integrated Left Hinge
ML15WSF2LP
Solid Panel Overlay Ready Door, Integrated Right Hinge
ML15WSP2RP
Solid Panel Overlay Ready Door, Integrated Left Hinge
ML15WSP2LP
No panel installation kit required.
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stabilityThe distinctive Marvel design features a thermal-efficient cabinet and door combined with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.
Front SideFront
ForcedAir Fan
Evaporator Plate
Return Air Intake
Front SideFront
ForcedAir Fan
Evaporator Plate
Return Air Intake
Width 14 ⅞"
Interior Finish Black
Capacity Up to 24 wine bottles
Shelving System Side mount - tray
Shelf Fronts Black painted maple
Other Storage NA
Interior Lighting 2 White LED Pods
Toe Grill Finish Black
Hinge Classic Hinge
Handle Designer
Control Type Intuit™
Temperature Range 40° - 65° F
Lock NA
Electrical Requirements 120V / 60Hz / 15A
Length of Power Cord 5'
Product Dimensions 14 ⅞" W x 33 ¾" H x 21 ½" D
Depth to Front of Door 23 23/32"
Depth to Handle 26 ¼"
Depth with door at 90° 37 1/16"
Shipping Weight 125 lbs
Finishes SS, B, O
Vacation / Sabbath Mode
Yes
Agency Approvals CSA
ENERGY STAR Certified
NA
Finishes Key
SS = Stainless SteelB = BlackO = Overlay
9
"F"
"D"
"E"
"H"
"J"
"G"
PRODUCT DIMENSIONS
PRODUCT DATA
MODELELECTRICAL
REQUIREMENTS #PRODUCTWEIGHT
ML15WSG 115V/60Hz/15A 105 lbs(47.7 kg)
ML15WS(P) or (F) 115V/60Hz/15A 105 lbs(47.7 kg)
ML24W*G 115V/60Hz/15A 140 lbs(63.6 kg)
ML24W*(P) or (F) 115V/60Hz/15A 140 lbs(63.6 kg)
APPLIES TO THE FOLLOWING MARVEL MODELSML15WS ML24WS
ML24WD
! WARNING Floor mount Anti-tip Bracket must be installed for freestand-ing applications. Not required for built in applications.
* Depth dimension of rough-in opening may vary depend-ing on each individual installation. To recess entire door "F" dimension plus 1" (2.5 cm) for thickness of power cord plug is required.
** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet.
# A grounded 15 amp dedicated circuit is required. Follow all local building codes when installing electrical and appli-ance.
Figure 8211⁄2"
(54.6cm)
1"(2.5 cm)
"A"
"B"
"C"
Cabinet Dimensions
"D" "E" "F"
14 7⁄8”(60.7 cm)
33 3⁄4” to 34 3⁄4”(85.7 to 88.3 cm)
23 23⁄32”(60.2 cm)
“G” “H” “J”
25 21 ⁄32”(65.2 cm)
37 13⁄32”(95 cm)
16 11 ⁄16”(42.4 cm)
15" Rough-In Dimensions
"A" "B" "C"
15"(38.1 cm)
**34" to 35"(86.4 to 88.9 cm)
24”(61 cm)
Overlay Panels
14
! CAUTION
15⁄32"(2.9 cm)
Figure 17Right Hand Hinged Door
24" (61 cm) wide appliance
Figure 18Right Hand Hinged Door
24" (61 cm) wide appliance
OVERLAY DOOR PANEL INSTALLATION
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
Clearance for hinge
at top and bottom
2"(5.1 cm)
311⁄16"(9.4 cm)
11⁄2"(3.8 cm)typical
1⁄4"(6 mm)Deep
Hin
ge s
ide
of d
oor
Clearance for screw head, 4 places
3011⁄32"(77.1 cm)
111⁄16"(4.3 cm)
233⁄4"(60.3 cm)
31⁄8"(7.9 cm)
Top of door
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 10a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 19a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
41⁄8"(10.5 cm)
1⁄4" (6 mm)radius ispermissible
This sideto door
31⁄8"(7.9 cm)
327⁄32"(9.8 cm)
13⁄16"(3 cm)
14"(35.6 cm)
47⁄8"(12.4 cm)
For comprehensive installation instructions, please visit www.marvelrefrigeration.com
15
! CAUTIONWeight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
15⁄32"(2.9 cm)
Press and hold down this tab on the wire connector and pull the connector apart.
OVERLAY DOOR PANEL INSTALLATION
Figure 13Left Hand Hinged Door
15" (38.1 cm) wide appliance
Figure 11
Overlay panel to be centered on width of door.
Overlay panel flush with top
and side of door.
Magnetic Gasket remove starting at a corner, grasp and pull away from the door.
Holes in gasket
retainer.
Figure 12a
Figure 12
Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20.
Clearance for screw head,
4 places
Clearance for hinge2 places
Hin
ge s
ide
of d
oor
143⁄4"(37.5 cm) 1⁄4" (6 mm)
Deep
47⁄8"(12.4 cm)
5"(12.7 cm)
1" (25.4 mm) diameter counter bore 1⁄4" (6.4mm) deep 4 places.
13⁄16"(3 cm)
31⁄8"(7.9 cm) 13⁄4"
(4.4 cm)
31⁄8"(7.9 cm)Minimum
3011⁄32"(77.1 cm)
2"(5.1 cm)
327⁄32"(9.7 cm)
41⁄8"(10.5 cm)Minimum
31⁄8"(7.9 cm)Minimum
1⁄4" (6 mm)radius ispermissible
111⁄16"(4.3 cm)
Figure 14Left Hand Hinged Door
15" (38.1 cm) Wide Appliance
11⁄2"(3.8 cm)typical
311⁄16"(9.4 cm)
This sidefacing interior
15
! CAUTIONWeight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
15⁄32"(2.9 cm)
Press and hold down this tab on the wire connector and pull the connector apart.
OVERLAY DOOR PANEL INSTALLATION
Figure 13Left Hand Hinged Door
15" (38.1 cm) wide appliance
Figure 11
Overlay panel to be centered on width of door.
Overlay panel flush with top
and side of door.
Magnetic Gasket remove starting at a corner, grasp and pull away from the door.
Holes in gasket
retainer.
Figure 12a
Figure 12
Step 3: Cut and drill the overlay panelDepending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20.
Clearance for screw head,
4 places
Clearance for hinge2 places
Hin
ge s
ide
of d
oor
143⁄4"(37.5 cm) 1⁄4" (6 mm)
Deep
47⁄8"(12.4 cm)
5"(12.7 cm)
1" (25.4 mm) diameter counter bore 1⁄4" (6.4mm) deep 4 places.
13⁄16"(3 cm)
31⁄8"(7.9 cm) 13⁄4"
(4.4 cm)
31⁄8"(7.9 cm)Minimum
3011⁄32"(77.1 cm)
2"(5.1 cm)
327⁄32"(9.7 cm)
41⁄8"(10.5 cm)Minimum
31⁄8"(7.9 cm)Minimum
1⁄4" (6 mm)radius ispermissible
111⁄16"(4.3 cm)
Figure 14Left Hand Hinged Door
15" (38.1 cm) Wide Appliance
11⁄2"(3.8 cm)typical
311⁄16"(9.4 cm)
This sidefacing interior
16
! CAUTIONWeight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
15⁄32"(2.9 cm) 15⁄32"
(2.9 cm)
OVERLAY DOOR PANEL INSTALLATION
Hin
ge s
ide
of d
oor
Top of door
Clearance for screw head, 4 places
Clearance for hinge2 places
Figure 15Right Hand Hinged Door
15" (38.1 cm) wide appliance
Clearance for screw head,
4 places
Hin
ge s
ide
of d
oor
Clearance for hinge
at top and bottom
Figure 17Left Hand Hinged Door
24" (61 cm) wide appliance
Figure 16Right Hand Hinged Door
15" (38.1 cm) wide appliance
Figure 18Left Hand Hinged Door
24" (61 cm) wide appliance
143⁄4"(37.5 cm)1⁄4" (6 mm)
Deep
1" (25.4 mm) diameter counter bore 1⁄4" (6 mm) deep 4 places.
47⁄8"(12.4 cm)
13⁄16"(3 cm)
31⁄8"(7.9 cm)
5"(12.7 cm)
13⁄4"(4.4 cm)
327⁄32"(9.7 cm)
41⁄8"(10.5 cm)Minimum
31⁄8"(7.9 cm)Minimum
111⁄16"(4.3 cm)
1⁄4" (6 mm)radius ispermissible
31⁄8"(7.9 cm)Minimum
3011⁄32"(77.1 cm)
11⁄2"(3.8 cm)typical
2"(5.1 cm) 311⁄16"
(9.4 cm)
Top of door
233⁄4"(60.3 cm)
13⁄4"(4.4 cm)
1⁄4"(6 mm)Deep
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep4 places
31⁄8"(7.9 cm)
2"(5.1 cm)
311⁄16"(9.4 cm)
11⁄2"(3.8 cm)typical
111⁄16"(4.3 cm)
3011⁄32"(77.1 cm)
31⁄8"(7.9 cm)
1⁄4" (6 mm)radius ispermissible
327⁄32"(9.8 cm)
47⁄8"(12.4 cm)
14"(35.6 cm)
13⁄16"(3 cm)
31⁄8"(7.9 cm)
41⁄8"(10.5 cm)
This sidefacing interior
This sidefacing interior
17
! CAUTIONWeight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
OVERLAY DOOR PANEL INSTALLATION
Clearance for hinge
at top and bottom
Top of door
Clearance for screw head, 4 places
Figure 19Right Hand Hinged Door
24" (61 cm) wide appliance
Hin
ge s
ide
of d
oor
233⁄4"(60.3 cm)
Figure 20Right Hand Hinged Door
24" (61 cm) wide appliance
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
2"(5.1 cm)
311⁄16"(9.4 cm)
1⁄4"(6 mm)Deep
3011⁄32"(77.1 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
31⁄8"(7.9 cm)
11⁄2"(3.8 cm)typical
111⁄16"(4.3 cm)
47⁄8"(12.4 cm)
14"(35.6 cm)13⁄16"
(3 cm)
327⁄32"(9.8 cm)
1⁄4" (6 mm)radius ispermissible
This sidefacing interior
41⁄8"(10.5 cm)
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Figure 21
#10 x 1/2"screw
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 21). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
15⁄32"(2.9 cm)
17
! CAUTIONWeight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
OVERLAY DOOR PANEL INSTALLATION
Clearance for hinge
at top and bottom
Top of door
Clearance for screw head, 4 places
Figure 19Right Hand Hinged Door
24" (61 cm) wide appliance
Hin
ge s
ide
of d
oor
233⁄4"(60.3 cm)
Figure 20Right Hand Hinged Door
24" (61 cm) wide appliance
31⁄8"(7.9 cm)
31⁄8"(7.9 cm)
13⁄4"(4.4 cm)
2"(5.1 cm)
311⁄16"(9.4 cm)
1⁄4"(6 mm)Deep
3011⁄32"(77.1 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep
4 places
31⁄8"(7.9 cm)
11⁄2"(3.8 cm)typical
111⁄16"(4.3 cm)
47⁄8"(12.4 cm)
14"(35.6 cm)13⁄16"
(3 cm)
327⁄32"(9.8 cm)
1⁄4" (6 mm)radius ispermissible
This sidefacing interior
41⁄8"(10.5 cm)
Material Type #10 Wood Screw Hardwood 1⁄8" (3.2 mm) Diameter. Pilot HoleSoftwood 7⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Figure 21
#10 x 1/2"screw
Step 4: Assemble the panel to the doorThe preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 21). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
15⁄32"(2.9 cm)