1
-
Upload
pushpendra-kumar -
Category
Documents
-
view
1 -
download
0
Transcript of 1
((A unit of TAFE MOTORS AND TRACTORS LTD.A unit of TAFE MOTORS AND TRACTORS LTD.))
A TRAINING REPORT
Titled
TIME AND MOTION STUDY
Submitted In partial fulfillment for the award of the degree
Of
BACHELOR OF TECHNOLOGY
In
MECHANICAL ENGINEERING
FromRAJASTHAN TECHNICAL UNIVERSITY, KOTA
Session: 2013-14Submitted to: Submitted by:Mr. Amit Malik Prashant Verma
(HOD of ME Deptt.) B.Tech. (Final Year
Department of Mechanical Engineering
Institute of Engineering & Technology, Alwar (Raj.)
CERTIFICATEi
ii
ACKNOWLEDGEMENT
We are deeply indebted to EICHER ENGINE, ALWAR for giving us permission to
accomplish our project .
We express our deep sense of gratitude towards the management and administration for
having shown keen interest at every stage of development of our project work and guiding us
in every aspect.
We would like to thank him for energetic guidance because of which we could complete our
project successfully with a lot of practical knowledge and we are extremely thankful to all the
EICHER ENGINE, ALWAR staff,
We also extend our thanks to our Head of Department Mr. Amit Malik (Deptt. of Mech. Engg.) who guided us well & provided us the great opportunity to complete this report.
We would also like to thanks all our colleagues, who made their suggestions for the betterment of the practical training report.
PRASHANT
VERMA
B.Tech. (Final
Year)
iii
ABSTRACTThe addition of Practical Training Report in the curriculum of the degree engineering by the
Rajasthan Technical University, Kota is an appreciable act which enables us to learn to work
in a team & where we have to stress during the course of Training Programs. The “EICHER
ENGINE” is infect the honest work as per the spirit of the training report. While working in
company, we come to know how to face the difficulties & to cooperate within a team.
We do not claim the originality of the materials presented in this report. We have taken
assistance from a large no. of books & literatures for presenting the Report.
iv
TABLE OF CONTENTS
Cover Page i
Certificate ii
Acknowledgement iii
Abstract iv
Index v
CONTENTS
Sr. No. Topics Pg. No.
CHAPTER-1 INTRODUCTION 1-3
1.1 MEANING OF THE PROJECT 1
CHAPTER-2 COMPANY PROFILE 4-12
2.1 TAFE PROFILE 5
2.2 2.2 TAKE OVER EICHER TRACTORS TAKE OVER EICHER TRACTORS 66
2.3 FULLY INTEGRATED R&D CENTER 9
2.4 RESEARCH & DEVELOPMENT 10
2.5 SALES & SERVICE NETWORK 10
CHAPTER-3 CORE VALUES OF EICHER ENGINES 13
CHAPTER-4 CLASSIFICATION & SPECIFICATION 14-33
4.1 AGRO ENGINES 15
4.2 AUTO ENGINES 21
4.3 GENSET ENGINES 25
4.4 SILENT ENGINES 32
CHAPTER-5 ABOUT THE TOPIC 34-53
5.1 PRODUCTIVITY & LABOUR PRODUCTIVITY 35
v
5.2 EICHER ENGINES OVERVIEW 37
5.3 TIME AND MOTION STUDY 39
CONCLUSIONS 54
REFERENCES 56
vi