Name Issue Type Description

ADDB01, ADMOS01, ADOTC01,

ADREP01, ASEAW01, ASEAW02,

NETBW02B, NEWBW02B, NEWBW03,

PDDB01, PDMOS01, PDOTC01,

PDREP01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, SDDB01, SDMOS01,

SDOTC01, SDREP01

Basic System

Information

Proliant BL480c (dual core processor) did not

match any E-Lab Navigator-identified Host

System.

ADDB01, ADMOS01, ADOTC01,

ADREP01, ASEAW01, BIEAW01,

DOMAW01, DOMAW02, EMBAW01A,

EMBBW01B, ITNAW01, ITNAW02,

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P01WEBDB01,

P01WEBDB02, P02SEARCH01,

P02WEBDB01, PDDB01, PDMOS01,

PDOTC01, PDREP01, PSCAW01,

PSCBW01, PSCNW01, PSOAW01,

PSOBW01, PSONW01, QDDB01,

QDMOS01, QDOTC01, QDREP01,

PathManage

ment

Detected version PowerPath 5.3 SP1 (EOL)

is not recommended but is allowed.

ADDB01, ADMOS01, ADOTC01,

ADREP01, BIEAW01, ITNAW01,

MDEPM01, MDEPM02, NETBW02B,

NEWBW02B, NEWBW03, PSCNW01,

PSONW01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, RDBNW01, REDAW01A,

TDEPM01, WSQASEARCH

PowerPathPowerpath device harddisk1 has policy:

BasicFailover

ADDB01, ADMOS01, ADOTC01,

ADREP01, BIEAW01, ITNAW01,

MDEPM01, MDEPM02, NETBW02B,

NEWBW02B, NEWBW03, PSCNW01,

PSONW01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, RDBNW01, TDEPM01,

WSQASEARCH

PowerPathCould not find PowerPath capabilities

(license)

ADDB01, ADMOS01, ADOTC01,

ADREP01, ITNAW01, ITNAW02,

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, SDDB01, SDMOS01,

SDOTC01, SDREP01, TDEPM01,

WSQASEARCH

HBAHBA is allowed but not listed in an EMC

recommended configuration.

ADDB01, ADMOS01, ADOTC01,

ADREP01, ITNAW01, ITNAW02,

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, SDDB01, SDMOS01,

SDOTC01, SDREP01, TDEPM01,

WSQASEARCH

HBA

The EMC Qualified Host System information

required to validate the HBA bios for Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21) is absent, so no

recommendations can be made.

ADDB01, ADMOS01, ADOTC01,

ADREP01, ITNAW01, ITNAW02,

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, SDDB01, SDMOS01,

SDOTC01, SDREP01, TDEPM01,

WSQASEARCH

HBA

The EMC Qualified Host System information

required to validate the HBA driver for

Emulex LPe1105-HP 4Gb FC HBA for HP c-

Class Bladesystem (403621-B21) is absent,

so no recommendations can be made.

ADDB01, ADMOS01, ADOTC01,

ADREP01, ITNAW01, ITNAW02,

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, SDDB01, SDMOS01,

SDOTC01, SDREP01, TDEPM01,

WSQASEARCH

HBA

The EMC Qualified Host System information

required to validate the HBA firmware for

Emulex LPe1105-HP 4Gb FC HBA for HP c-

Class Bladesystem (403621-B21) is absent,

so no recommendations can be made.

ADDB01, ADMOS01, ADOTC01,

ADREP01, ITNAW01, MDEPM01,

MDEPM02, PSCNW01, QDDB01,

QDMOS01, QDOTC01, RAPAW01A,

RAPBW01B, TDEPM01, WSQASEARCH

PowerPathPowerpath device harddisk1 shows c1t0d0

with policy: unlic, status: alive, errors: 0

ADDB01, ADMOS01, ADOTC01,

ADREP01, ITNAW01, MDEPM01,

MDEPM02, PSCNW01, QDDB01,

QDMOS01, QDOTC01, RAPAW01A,

RAPBW01B, TDEPM01, WSQASEARCH

PowerPathPowerpath device harddisk1 shows c1t1d0

with policy: unlic, status: alive, errors: 0

ADDB01, ADMOS01, ADOTC01,

ADREP01, NETBW02B, NEWBW02B,

NEWBW03, PDDB01, PDMOS01,

PDOTC01, PDREP01, QDDB01,

QDMOS01, QDOTC01, QDREP01,

RAPAW01A, RAPBW01B, SDDB01,

SDMOS01, SDOTC01, SDREP01

HBAUnable to determine Host System(Proliant

BL480c (dual core processor)) information.

ADDB01, ADMOS01, ADOTC01,

ADREP01, PDDB01, PDMOS01,

PDOTC01, PDREP01, PSCAW01,

PSCBW01, QDDB01, QDMOS01,

QDOTC01, QDREP01, SDDB01,

SDMOS01, SDOTC01, SDREP01

SYMMETRIX

STORPort hotfix 957910 requires the SPC2

flag on Symmetrix FA ports to be Enabled.

Reference emc201305

ADDB01, ADMOS01, ADOTC01,

ADREP01, QDDB01, QDMOS01,

QDOTC01, QDREP01

SolutionsEna

bler

Unable to identify Solutions Enabler 7.1.2 as

EMC Qualified information.

ADDB01, ADOTC01, ADREP01,

DOMAW01, DRSANADM1, ITNAW01,

MDEPM02, NETBW02B, NEWBW02B,

NEWBW03, PDDB01, PDMOS01,

PDOTC01, PDREP01, PSCAW01,

PSCBW01, PSCNW01, PSOAW01,

PSOBW01, PSONW01, QDDB01,

QDREP01, RAPAW01A, RAPBW01B,

RDBNW01, SDDB01, SDMOS01,

TDEPM01

Disk Partition

PHYSICALDRIVE0 - Primary Partition 1 has

starting offset of 32. Best practice is to use a

multiple of 128 see emc56324 for further

details.

ADOTC01, DRSANADM1,

P01WEBDB01, P02WEBDB01,

PDREP01, QDREP01, SDREP01

Disk Partition

PHYSICALDRIVE3 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

ADOTC01, EMBAW01A, EMBBW01B,

NEWBW03, P01WEBDB01,

P01WEBDB02, P02WEBDB01, PDDB01,

PDMOS01, PDOTC01, PDREP01,

QDDB01, QDREP01, RAPAW01A,

RAPBW01B, SDMOS01, SDOTC01,

SDREP01

HBA NodeTimeOut, 0xa (Should be default)

ADOTC01, P01WEBDB01,

P01WEBDB02, P02WEBDB01, PDDB01,

PDMOS01, PDOTC01, PDREP01,

QDDB01, QDREP01, SDMOS01,

SDOTC01, SDREP01

HBA LinkTimeOut, 0x28 (Should be default)

ADOTC01, P01WEBDB01, QDREP01,

SDREP01Disk Partition

PHYSICALDRIVE2 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

ADOTC01, QDREP01 Disk Partition

PHYSICALDRIVE1 - PROXY-830 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

ADREP01 PowerPathPowerpath device harddisk2 shows c1t0d1

with policy: unlic, status: alive, errors: 0

ADREP01 PowerPathPowerpath device harddisk2 shows c1t1d1

with policy: unlic, status: alive, errors: 0

ADREP01, QDREP01 PowerPathPowerpath device harddisk3 shows c1t0d2

with policy: unlic, status: alive, errors: 0

ADREP01, QDREP01 PowerPathPowerpath device harddisk3 shows c1t1d2

with policy: unlic, status: alive, errors: 0

ADREP01, QDREP01, RDBNW01 PowerPathPowerpath device harddisk2 has policy:

BasicFailover

ADREP01, QDREP01, RDBNW01 PowerPathPowerpath device harddisk3 has policy:

BasicFailover

ASEAW01ClariionHostI

nteroperability

There is no Clariion array detected. Skipping

validation of Navisphere Host Agent 6.29

Software

ASEAW01ClariionHostI

nteroperability

There is no Clariion array detected. Skipping

validation of Navisphere Secure CLI 7.30

Software

ASEAW02 Config File20 - This is not equal to EMC recommended

setting of 60

ASEAW02, DRSANADM1 HBA

No STORPort hotfix found. For Windows

2003 running STORPort drivers, Microsoft

STORPort hotfix KB957910 is required by

EMC.

BIAAW01 HBA

EMC qualifies detected HBA model (Emulex

LPe1205-HP 8Gb FC HBA for HP c-Class

Bladesystem (456972-B21)) but detected

HBA Driver version (2.33.005) is not at

recommended level.

BIAAW01, BIEAW01 HBA

EMC qualifies detected HBA model (Emulex

LPe1205-HP 8Gb FC HBA for HP c-Class

Bladesystem (456972-B21)) but detected

HBA Firmware version (1.11A5) is not at

recommended level.

BIEAW01 HBA

EMC qualifies detected HBA model (Emulex

LPe1205-HP 8Gb FC HBA for HP c-Class

Bladesystem (456972-B21)) but detected

HBA Driver version (2.32.002) is not at

recommended level.

BIEAW01, PSONW01 PowerPathPowerpath device harddisk1 shows c2t0d0

with policy: unlic, status: alive, errors: 0

BIEAW01, PSONW01 PowerPathPowerpath device harddisk1 shows c2t1d0

with policy: unlic, status: alive, errors: 0

DOMAW01, DRSANADM1, REDAW01A,

REDBW01BHBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

Driver version (2.20.006) is not at

recommended level.

DOMAW01, MDEPM01, MDEPM02,

P01SEARCH01, P01WEBDB01,

P02SEARCH01, PDDB01, PDREP01,

PSCAW01, PSCNW01, QDMOS01,

TDEPM01, WSQADB1, WSQADB2,

WSQASEARCH

Disk Partition

PHYSICALDRIVE1 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

DOMAW01, REDAW01A, REDBW01B HBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

BIOS version (2.11a0) is not at

recommended level.

DOMAW02 Disk Partition

PHYSICALDRIVE0 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

DOMAW02 HBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

BIOS version (2.12a6) is not at

recommended level.

DOMAW02 HBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

Driver version (2.32.002) is not at

recommended level.

DOMAW02 HBA

EMC qualifies detected HBA model (A8003A-

B/FC2242SR (LPe11002)) but detected HBA

BIOS version (2.12a6) is not at

recommended level.

DOMAW02 HBA

EMC qualifies detected HBA model (A8003A-

B/FC2242SR (LPe11002)) but detected HBA

Driver version (2.32.002) is not at

recommended level.

DOMAW02, SDREP01 Disk Partition

PHYSICALDRIVE1 - Primary Partition 1 has

starting offset of 32. Best practice is to use a

multiple of 128 see emc56324 for further

details.

DRSANADM1 Disk Partition

PHYSICALDRIVE8 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

DRSANADM1 HBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

BIOS version (2.02a1) is not at

recommended level.

DRSANADM1 HBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

Firmware version (2.50A6) is not at

recommended level.

DRSANADM1PathManage

ment

Detected version PowerPath 5.3 (EOL) is not

recommended but is allowed.

DRSANADM1, P01WEBDB01,

P02WEBDB01, PDDB01, SDREP01,

WSQADB1

Disk Partition

PHYSICALDRIVE4 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

DRSANADM1, P01WEBDB01,

P02WEBDB01, SDREP01Disk Partition

PHYSICALDRIVE7 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

EMBAW01A OS UpdateSymmetrix Microcode Patch Level 5773.184

is not at the latest Patch Level 5773.176

EMBAW01A, EMBBW01B HBA

EMC qualifies detected HBA model (AJ763A-

B (LPe12002)) but detected HBA BIOS

version (2.02a2) is not at recommended

level.

EMBAW01A, EMBBW01B HBA

EMC qualifies detected HBA model (AJ763A-

B (LPe12002)) but detected HBA Driver

version (2.20.006) is not at recommended

level.

EMBAW01A, EMBBW01B HBA

EMC qualifies detected HBA model (AJ763A-

B (LPe12002)) but detected HBA Firmware

version (2.00A3) is not at recommended

level.

EMBAW01A, EMBBW01B, PDDB01,

PDMOS01, PDOTC01, PDREP01,

SDDB01, SDMOS01, SDOTC01,

SDREP01

SolutionsEna

bler

Unable to identify Solutions Enabler 7.1.1 as

EMC Qualified information.

ITNAW01, ITNAW02, ITNBW01,

MDEPM01, MDEPM02, P01SEARCH01,

P02SEARCH01, TDEPM01,

WSQASEARCH

Basic System

Information

Proliant BL460c (dual core processor) did not

match any E-Lab Navigator-identified Host

System.

ITNAW01, ITNAW02, ITNBW01,

MDEPM01, MDEPM02, P01SEARCH01,

P02SEARCH01, TDEPM01,

WSQASEARCH

HBAUnable to determine Host System(Proliant

BL460c (dual core processor)) information.

MDEPM01 Disk Partition

PHYSICALDRIVE0 - PROXY-423 has

starting offset of 32. Best practice is to use a

multiple of 128 see emc56324 for further

details.

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 has policy:

BasicFailover

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t0d0

with policy: unlic, status: alive, errors: 0

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t1d0

with policy: unlic, status: alive, errors: 0

NETBW02B, NEWBW02B, NEWBW03,

QDREP01PowerPath

Powerpath device harddisk1 shows c1t0d1

with policy: unlic, status: alive, errors: 0

NETBW02B, NEWBW02B, NEWBW03,

QDREP01PowerPath

Powerpath device harddisk1 shows c1t1d1

with policy: unlic, status: alive, errors: 0

P01WEBDB01, P01WEBDB02,

P02WEBDB01, PSCAW01, PSCBW01,

PSOAW01, PSOBW01, RCLAW01A,

RCLBW01B, RDBNW01, SDBAW01A,

SDBBW01B

HBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA BIOS version (3.00a4) is not at

recommended level.

P01WEBDB01, P01WEBDB02,

P02WEBDB01, PSOAW01, PSOBW01,

RCLAW01A, RCLBW01B, SDBAW01A,

SDBBW01B

HBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA Driver version (2.20.006) is not at

recommended level.

P01WEBDB02, PDDB01, QDDB01,

WSQADB1Disk Partition

PHYSICALDRIVE6 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P01WEBDB02, QDDB01 Disk Partition

PHYSICALDRIVE5 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P02SEARCH01 HBA LinkTimeOut, 0x1c (Should be default)

P02WEBDB01, SDREP01 Disk Partition

PHYSICALDRIVE1 - PROXY-1041 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P02WEBDB01, SDREP01 Disk Partition

PHYSICALDRIVE2 - PROXY-1042 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDDB01 Disk Partition

PHYSICALDRIVE3 - PROXY-668 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDDB01, WSQADB1 Disk Partition

PHYSICALDRIVE5 - PROXY-691 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDDB01, WSQADB1 Disk Partition

PHYSICALDRIVE7 - PROXY-692 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDOTC01 Disk Partition

PHYSICALDRIVE3 - PROXY-917 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDREP01 Disk Partition

PHYSICALDRIVE4 - PROXY-875 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PSCAW01, PSCBW01SolutionsEna

bler

Unable to find any EMC supported versions

for Solutions Enabler 7.1

PSCAW01, PSCBW01SolutionsEna

bler

Unable to identify Solutions Enabler 7.1 as

EMC Qualified information.

PSCAW01, PSCBW01, PSCNW01,

PSONW01, RDBNW01, WSQADB1,

WSQADB2

HBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA Driver version (2.32.002) is not at

recommended level.

PSOAW01 PowerPathPowerpath device harddisk?? shows c1t0d3

with policy: active, status: dead, errors: 1

PSOAW01 PowerPathPowerpath device harddisk?? shows c1t1d3

with policy: active, status: dead, errors: 1

PSOAW01 PowerPathPowerpath device harddisk?? shows c2t0d3

with policy: active, status: dead, errors: 1

PSOAW01 PowerPathPowerpath device harddisk?? shows c2t1d3

with policy: active, status: dead, errors: 1

PSONW01, RAPAW01A, RAPBW01B,

RDBNW01HBA

No STORPort hotfix found. For Windows

2008 running STORPort drivers, Microsoft

STORPort hotfix KB968675 is required by

EMC.

QDREP01 PowerPathPowerpath device harddisk2 shows c1t0d0

with policy: unlic, status: alive, errors: 0

QDREP01 PowerPathPowerpath device harddisk2 shows c1t1d0

with policy: unlic, status: alive, errors: 0

RCLAW01A IO Timeout error

RDBNW01 PowerPathPowerpath device harddisk1 shows c3t0d0

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk1 shows c3t1d0

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk2 shows c3t0d1

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk2 shows c3t1d1

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk3 shows c3t0d2

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk3 shows c3t1d2

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk4 has policy:

BasicFailover

RDBNW01 PowerPathPowerpath device harddisk4 shows c3t0d3

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk4 shows c3t1d3

with policy: unlic, status: alive, errors: 0

REDAW01A PowerPathPowerpath device harddisk1 shows c3t0d1

with policy: unlic, status: alive, errors: 0

REDAW01A PowerPathPowerpath device harddisk1 shows c3t1d1

with policy: unlic, status: alive, errors: 0

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P01WEBDB01,

P01WEBDB02, P02SEARCH01,

P02WEBDB01, PDDB01, PDMOS01,

PDOTC01, PDREP01, PSCAW01,

PSCBW01, PSCNW01, PSOAW01,

PSOBW01

PathManage

ment

Detected version PowerPath 5.3 SP1 (EOL)

is not recommended but is allowed.

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01

HBAHBA is allowed but not listed in an EMC

recommended configuration.

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01

HBA

The EMC Qualified Host System information

required to validate the HBA bios for Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21) is absent, so no

recommendations can be made.

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01

HBA

The EMC Qualified Host System information

required to validate the HBA driver for

Emulex LPe1105-HP 4Gb FC HBA for HP c-

Class Bladesystem (403621-B21) is absent,

so no recommendations can be made.

ITNBW01, MDEPM01, MDEPM02,

NETBW02B, NEWBW02B, NEWBW03,

P01SEARCH01, P02SEARCH01,

PDDB01, PDMOS01, PDOTC01,

PDREP01

HBA

The EMC Qualified Host System information

required to validate the HBA firmware for

Emulex LPe1105-HP 4Gb FC HBA for HP c-

Class Bladesystem (403621-B21) is absent,

so no recommendations can be made.

ITNBW01, MDEPM01, MDEPM02,

P01SEARCH01, P02SEARCH01

Basic System

Information

Proliant BL460c (dual core processor) did not

match any E-Lab Navigator-identified Host

System.

ITNBW01, MDEPM01, MDEPM02,

P01SEARCH01, P02SEARCH01HBA

Unable to determine Host System(Proliant

BL460c (dual core processor)) information.

MDEPM01 Disk Partition

PHYSICALDRIVE0 - PROXY-423 has

starting offset of 32. Best practice is to use a

multiple of 128 see emc56324 for further

details.

MDEPM01, MDEPM02, NETBW02B,

NEWBW02B, NEWBW03, PSCNW01PowerPath

Could not find PowerPath capabilities

(license)

MDEPM01, MDEPM02, NETBW02B,

NEWBW02B, NEWBW03, PSCNW01PowerPath

Powerpath device harddisk1 has policy:

BasicFailover

MDEPM01, MDEPM02, P01SEARCH01,

P01WEBDB01, P02SEARCH01,

PDDB01, PDREP01, PSCAW01,

PSCNW01

Disk Partition

PHYSICALDRIVE1 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

MDEPM01, MDEPM02, PSCNW01 PowerPathPowerpath device harddisk1 shows c1t0d0

with policy: unlic, status: alive, errors: 0

MDEPM01, MDEPM02, PSCNW01 PowerPathPowerpath device harddisk1 shows c1t1d0

with policy: unlic, status: alive, errors: 0

MDEPM02, NETBW02B, NEWBW02B,

NEWBW03, PDDB01, PDMOS01,

PDOTC01, PDREP01, PSCAW01,

PSCBW01, PSCNW01, PSOAW01,

PSOBW01

Disk Partition

PHYSICALDRIVE0 - Primary Partition 1 has

starting offset of 32. Best practice is to use a

multiple of 128 see emc56324 for further

details.

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 has policy:

BasicFailover

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t0d0

with policy: unlic, status: alive, errors: 0

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk0 shows c1t1d0

with policy: unlic, status: alive, errors: 0

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk1 shows c1t0d1

with policy: unlic, status: alive, errors: 0

NETBW02B, NEWBW02B, NEWBW03 PowerPathPowerpath device harddisk1 shows c1t1d1

with policy: unlic, status: alive, errors: 0

NETBW02B, NEWBW02B, NEWBW03,

PDDB01, PDMOS01, PDOTC01,

PDREP01

Basic System

Information

Proliant BL480c (dual core processor) did not

match any E-Lab Navigator-identified Host

System.

NETBW02B, NEWBW02B, NEWBW03,

PDDB01, PDMOS01, PDOTC01,

PDREP01

HBAUnable to determine Host System(Proliant

BL480c (dual core processor)) information.

NEWBW03, P01WEBDB01,

P01WEBDB02, P02WEBDB01, PDDB01,

PDMOS01, PDOTC01, PDREP01

HBA NodeTimeOut, 0xa (Should be default)

P01WEBDB01 Disk Partition

PHYSICALDRIVE2 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P01WEBDB01, P01WEBDB02,

P02WEBDB01, PDDB01, PDMOS01,

PDOTC01, PDREP01

HBA LinkTimeOut, 0x28 (Should be default)

P01WEBDB01, P01WEBDB02,

P02WEBDB01, PSCAW01, PSCBW01,

PSOAW01, PSOBW01

HBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA BIOS version (3.00a4) is not at

recommended level.

P01WEBDB01, P01WEBDB02,

P02WEBDB01, PSOAW01, PSOBW01HBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA Driver version (2.20.006) is not at

recommended level.

P01WEBDB01, P02WEBDB01 Disk Partition

PHYSICALDRIVE7 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P01WEBDB01, P02WEBDB01, PDDB01 Disk Partition

PHYSICALDRIVE4 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P01WEBDB01, P02WEBDB01,

PDREP01Disk Partition

PHYSICALDRIVE3 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P01WEBDB02 Disk Partition

PHYSICALDRIVE5 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P01WEBDB02, PDDB01 Disk Partition

PHYSICALDRIVE6 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P02SEARCH01 HBA LinkTimeOut, 0x1c (Should be default)

P02WEBDB01 Disk Partition

PHYSICALDRIVE1 - PROXY-1041 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

P02WEBDB01 Disk Partition

PHYSICALDRIVE2 - PROXY-1042 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDDB01 Disk Partition

PHYSICALDRIVE3 - PROXY-668 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDDB01 Disk Partition

PHYSICALDRIVE5 - PROXY-691 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDDB01 Disk Partition

PHYSICALDRIVE7 - PROXY-692 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDDB01, PDMOS01, PDOTC01,

PDREP01

SolutionsEna

bler

Unable to identify Solutions Enabler 7.1.1 as

EMC Qualified information.

PDDB01, PDMOS01, PDOTC01,

PDREP01, PSCAW01, PSCBW01SYMMETRIX

STORPort hotfix 957910 requires the SPC2

flag on Symmetrix FA ports to be Enabled.

Reference emc201305

PDOTC01 Disk Partition

PHYSICALDRIVE3 - PROXY-917 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PDREP01 Disk Partition

PHYSICALDRIVE4 - PROXY-875 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PSCAW01, PSCBW01SolutionsEna

bler

Unable to find any EMC supported versions

for Solutions Enabler 7.1

PSCAW01, PSCBW01SolutionsEna

bler

Unable to identify Solutions Enabler 7.1 as

EMC Qualified information.

PSCAW01, PSCBW01, PSCNW01 HBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA Driver version (2.32.002) is not at

recommended level.

PSOAW01 PowerPathPowerpath device harddisk?? shows c1t0d3

with policy: active, status: dead, errors: 1

PSOAW01 PowerPathPowerpath device harddisk?? shows c1t1d3

with policy: active, status: dead, errors: 1

PSOAW01 PowerPathPowerpath device harddisk?? shows c2t0d3

with policy: active, status: dead, errors: 1

PSOAW01 PowerPathPowerpath device harddisk?? shows c2t1d3

with policy: active, status: dead, errors: 1

PSONW01 PowerPathPowerpath device harddisk1 shows c2t0d0

with policy: unlic, status: alive, errors: 0

PSONW01 PowerPathPowerpath device harddisk1 shows c2t1d0

with policy: unlic, status: alive, errors: 0

PSONW01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, RCLAW01A, RCLBW01B,

RDBNW01, REDAW01A, REDBW01B,

SDBAW01A, SDBBW01B, SDDB01,

SDMOS01, SDOTC01, SDREP01,

TDEPM01, WSQADB1, WSQADB2,

WSQASEARCH

PathManage

ment

Detected version PowerPath 5.3 SP1 (EOL)

is not recommended but is allowed.

PSONW01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, RDBNW01, REDAW01A,

TDEPM01, WSQASEARCH

PowerPathPowerpath device harddisk1 has policy:

BasicFailover

PSONW01, QDDB01, QDMOS01,

QDOTC01, QDREP01, RAPAW01A,

RAPBW01B, RDBNW01, TDEPM01,

WSQASEARCH

PowerPathCould not find PowerPath capabilities

(license)

PSONW01, QDDB01, QDREP01,

RAPAW01A, RAPBW01B, RDBNW01,

SDDB01, SDMOS01, TDEPM01

Disk Partition

PHYSICALDRIVE0 - Primary Partition 1 has

starting offset of 32. Best practice is to use a

multiple of 128 see emc56324 for further

details.

PSONW01, RAPAW01A, RAPBW01B,

RDBNW01HBA

No STORPort hotfix found. For Windows

2008 running STORPort drivers, Microsoft

STORPort hotfix KB968675 is required by

EMC.

PSONW01, RDBNW01, WSQADB1,

WSQADB2HBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA Driver version (2.32.002) is not at

recommended level.

QDDB01 Disk Partition

PHYSICALDRIVE5 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

QDDB01, QDMOS01, QDOTC01,

QDREP01

SolutionsEna

bler

Unable to identify Solutions Enabler 7.1.2 as

EMC Qualified information.

QDDB01, QDMOS01, QDOTC01,

QDREP01, RAPAW01A, RAPBW01B,

SDDB01, SDMOS01, SDOTC01,

SDREP01

Basic System

Information

Proliant BL480c (dual core processor) did not

match any E-Lab Navigator-identified Host

System.

QDDB01, QDMOS01, QDOTC01,

QDREP01, RAPAW01A, RAPBW01B,

SDDB01, SDMOS01, SDOTC01,

SDREP01

HBAUnable to determine Host System(Proliant

BL480c (dual core processor)) information.

QDDB01, QDMOS01, QDOTC01,

QDREP01, RAPAW01A, RAPBW01B,

SDDB01, SDMOS01, SDOTC01,

SDREP01, TDEPM01, WSQASEARCH

HBAHBA is allowed but not listed in an EMC

recommended configuration.

QDDB01, QDMOS01, QDOTC01,

QDREP01, RAPAW01A, RAPBW01B,

SDDB01, SDMOS01, SDOTC01,

SDREP01, TDEPM01, WSQASEARCH

HBA

The EMC Qualified Host System information

required to validate the HBA bios for Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21) is absent, so no

recommendations can be made.

QDDB01, QDMOS01, QDOTC01,

QDREP01, RAPAW01A, RAPBW01B,

SDDB01, SDMOS01, SDOTC01,

SDREP01, TDEPM01, WSQASEARCH

HBA

The EMC Qualified Host System information

required to validate the HBA driver for

Emulex LPe1105-HP 4Gb FC HBA for HP c-

Class Bladesystem (403621-B21) is absent,

so no recommendations can be made.

QDDB01, QDMOS01, QDOTC01,

QDREP01, RAPAW01A, RAPBW01B,

SDDB01, SDMOS01, SDOTC01,

SDREP01, TDEPM01, WSQASEARCH

HBA

The EMC Qualified Host System information

required to validate the HBA firmware for

Emulex LPe1105-HP 4Gb FC HBA for HP c-

Class Bladesystem (403621-B21) is absent,

so no recommendations can be made.

QDDB01, QDMOS01, QDOTC01,

QDREP01, SDDB01, SDMOS01,

SDOTC01, SDREP01

SYMMETRIX

STORPort hotfix 957910 requires the SPC2

flag on Symmetrix FA ports to be Enabled.

Reference emc201305

QDDB01, QDMOS01, QDOTC01,

RAPAW01A, RAPBW01B, TDEPM01,

WSQASEARCH

PowerPathPowerpath device harddisk1 shows c1t0d0

with policy: unlic, status: alive, errors: 0

QDDB01, QDMOS01, QDOTC01,

RAPAW01A, RAPBW01B, TDEPM01,

WSQASEARCH

PowerPathPowerpath device harddisk1 shows c1t1d0

with policy: unlic, status: alive, errors: 0

QDDB01, QDREP01, RAPAW01A,

RAPBW01B, SDMOS01, SDOTC01,

SDREP01

HBA NodeTimeOut, 0xa (Should be default)

QDDB01, QDREP01, SDMOS01,

SDOTC01, SDREP01HBA LinkTimeOut, 0x28 (Should be default)

QDDB01, WSQADB1 Disk Partition

PHYSICALDRIVE6 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

QDMOS01, TDEPM01, WSQADB1,

WSQADB2, WSQASEARCHDisk Partition

PHYSICALDRIVE1 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

QDREP01 Disk Partition

PHYSICALDRIVE1 - PROXY-830 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

QDREP01 PowerPathPowerpath device harddisk1 shows c1t0d1

with policy: unlic, status: alive, errors: 0

QDREP01 PowerPathPowerpath device harddisk1 shows c1t1d1

with policy: unlic, status: alive, errors: 0

QDREP01 PowerPathPowerpath device harddisk2 shows c1t0d0

with policy: unlic, status: alive, errors: 0

QDREP01 PowerPathPowerpath device harddisk2 shows c1t1d0

with policy: unlic, status: alive, errors: 0

QDREP01 PowerPathPowerpath device harddisk3 shows c1t0d2

with policy: unlic, status: alive, errors: 0

QDREP01 PowerPathPowerpath device harddisk3 shows c1t1d2

with policy: unlic, status: alive, errors: 0

QDREP01, RDBNW01 PowerPathPowerpath device harddisk2 has policy:

BasicFailover

QDREP01, RDBNW01 PowerPathPowerpath device harddisk3 has policy:

BasicFailover

QDREP01, SDREP01 Disk Partition

PHYSICALDRIVE2 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

QDREP01, SDREP01 Disk Partition

PHYSICALDRIVE3 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

RCLAW01A IO Timeout error

RCLAW01A, RCLBW01B, RDBNW01,

SDBAW01A, SDBBW01BHBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA BIOS version (3.00a4) is not at

recommended level.

RCLAW01A, RCLBW01B, SDBAW01A,

SDBBW01BHBA

EMC qualifies detected HBA model (Emulex

LPe1105-HP 4Gb FC HBA for HP c-Class

Bladesystem (403621-B21)) but detected

HBA Driver version (2.20.006) is not at

recommended level.

RDBNW01 PowerPathPowerpath device harddisk1 shows c3t0d0

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk1 shows c3t1d0

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk2 shows c3t0d1

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk2 shows c3t1d1

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk3 shows c3t0d2

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk3 shows c3t1d2

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk4 has policy:

BasicFailover

RDBNW01 PowerPathPowerpath device harddisk4 shows c3t0d3

with policy: unlic, status: alive, errors: 0

RDBNW01 PowerPathPowerpath device harddisk4 shows c3t1d3

with policy: unlic, status: alive, errors: 0

REDAW01A PowerPathPowerpath device harddisk1 shows c3t0d1

with policy: unlic, status: alive, errors: 0

REDAW01A PowerPathPowerpath device harddisk1 shows c3t1d1

with policy: unlic, status: alive, errors: 0

REDAW01A, REDBW01B HBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

BIOS version (2.11a0) is not at

recommended level.

REDAW01A, REDBW01B HBA

EMC qualifies detected HBA model (A8002A-

B/FC2142SR (LPe1150)) but detected HBA

Driver version (2.20.006) is not at

recommended level.

SDDB01, SDMOS01, SDOTC01,

SDREP01

SolutionsEna

bler

Unable to identify Solutions Enabler 7.1.1 as

EMC Qualified information.

SDREP01 Disk Partition

PHYSICALDRIVE1 - Primary Partition 1 has

starting offset of 32. Best practice is to use a

multiple of 128 see emc56324 for further

details.

SDREP01 Disk Partition

PHYSICALDRIVE1 - PROXY-1041 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

SDREP01 Disk Partition

PHYSICALDRIVE2 - PROXY-1042 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

SDREP01 Disk Partition

PHYSICALDRIVE7 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

SDREP01, WSQADB1 Disk Partition

PHYSICALDRIVE4 - Primary Partition 1 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

TDEPM01, WSQASEARCHBasic System

Information

Proliant BL460c (dual core processor) did not

match any E-Lab Navigator-identified Host

System.

TDEPM01, WSQASEARCH HBAUnable to determine Host System(Proliant

BL460c (dual core processor)) information.

WSQADB1 Disk Partition

PHYSICALDRIVE5 - PROXY-691 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

WSQADB1 Disk Partition

PHYSICALDRIVE7 - PROXY-692 has

starting offset of 63. Best practice is to use a

multiple of 128 see emc56324 for further

details.

HCL Remark

The Base system is not under EMC support

matrix

Not an issue is considering firmware upgrade

Infrastructure Software EMC PowerPath 5.5 --

Requires mandatory patch 5.5 P01 if using

PowerPath Encryption with RSA or PowerPath

Migration Enabler features. || For encryption

support please refer to the PowerPath and

PowerPath/VE Family for Windows Release

Notes. || Support of VSS Provider requires

minimum EMC Solutions Enabler 7.0.0.0

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

Have to rely on Host side recommendation

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

Have to rely on Host side recommendation

SPC2 Flag need to be configured on the FA

port this host are masked to

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

No remark

No remark

Please set the HBA Node time out to 0xa

Please set the HBA link time out to 0x28

No remark

No remark

No remark

No remark

No remark

No remark

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

not required

not required

Set the time "TimeOutValue =60, in

HKEY_LOCAL_MACHINE\System\CurrentCo

ntrolSet\Services\Disk

recomendaded to install "Microsoft STORPort

hotfix KB957910"

Hba driver recommended 2.70.018, 2.72.012

recommended Firmware 2.00a4

Recommended Driver 2.70.018, 2.72.012

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

recommended Driver 2.70.018

No remark

recommended bios 2.12a9

No remark

recommended bios 2.12a9

Recommended 2.70.018

Recommended bios 2.12a9

Recommended driver 2.70.018

No remark

No remark

Recommended 2.12a9

Recommended 2.82a4

EMC PowerPath 5.5, EMC PowerPath 5.5

SP1, EMC PowerPath 5.7

No remark

No remark

No issue with switch upgrade

Recommended bios2.12a9

Recommended driver2.72.012

Recommended firmware 2.00a4

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

Have to rely on Host side recommendation

Have to rely on Host side recommendation

No remark

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

Recommended bios 3.11a5

Recommended driver 2.50.007, 2.70.018

No remark

No remark

0x1c

No remark

No remark

No remark

No remark

No remark

No remark

No remark

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

recommended driver 2.50.007, 2.70.018

Verify the device if not in use, remove from

the system to avoid error

Verify the device if not in use, remove from

the system to avoid error

Verify the device if not in use, remove from

the system to avoid error

Verify the device if not in use, remove from

the system to avoid error

recommended to install Microsoft STORPort

hotfix KB968675

Verify the device if not in use, remove from

the system to avoid error

Verify the device if not in use, remove from

the system to avoid error

No Ttime out error

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

EMC PowerPath 5.5, EMC PowerPath 5.5

SP1, EMC PowerPath 5.7

The HBA installaed on the system is

LPe1105-HP (Emulex LPe1105-HP 4Gb FC

HBA for HP c-Class Bladesystem (403621-

B21)) recommended bios version 3.11a5,

driver 2.50.007, 2.70.018 and firmware level

2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

No in EMC data base

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

No remark

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

No remark

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

No remark

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

No issue with switch upgrade

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4 -

LPe1105-HP (Emulex LPe1105-HP 4Gb FC

HBA for HP c-Class Bladesystem (403621-

B21))

0xa

No remark

0x28

recommended bios version 3.11a5

Recommended driver 2.50.007, 2.70.018

No remark

No remark

No remark

No remark

No remark

0x1c

No remark

No remark

No remark

No remark

No remark

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

STORPort hotfix 957910 requires the SPC2

No remark

No remark

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

Recommended driver 2.50.007, 2.70.018

Verify the device if not in use, remove from

the system to avoid error

Verify the device if not in use, remove from

the system to avoid error

Verify the device if not in use, remove from

the system to avoid error

Verify the device if not in use, remove from

the system to avoid error

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

EMC PowerPath 5.5, EMC PowerPath 5.5

SP1, EMC PowerPath 5.7

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

No remark

Microsoft STORPort hotfix KB968675

Recommended driver 2.50.007, 2.70.018

No remark

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

No issue for switch upgrad

The HBA installaed on the system is

LPe1105-HP (Emulex LPe1105-HP 4Gb FC

HBA for HP c-Class Bladesystem (403621-

B21)) recommended bios version 3.11a5,

driver 2.50.007, 2.70.018 and firmware level

2.82a4

The HBA installaed on the system is

LPe1105-HP (Emulex LPe1105-HP 4Gb FC

HBA for HP c-Class Bladesystem (403621-

B21)) recommended bios version 3.11a5,

driver 2.50.007, 2.70.018 and firmware level

2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

STORPort hotfix 957910 requires

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

0xa

0x28

No remark

No remark

No remark

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

No Ttime out error found

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

recommended bios version 3.11a5, driver

2.50.007, 2.70.018 and firmware level 2.82a4

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

license have to be verify if powerpath is in use

recomended driver version 2.70.018, Bios

2.12a9,firmware 2.82a4

recomended driver version 2.70.018, Bios

2.12a9,firmware 2.82a4

Install any of the version which is

recommended bt EMC EMC Solutions

Enabler 7.2, EMC Solutions Enabler 7.2.1,

EMC Solutions Enabler 7.3, EMC Solutions

Enabler 7.3.1, EMC Solutions Enabler 7.3.2,

EMC Solutions Enabler 7.4, EMC Solutions

Enabler 7.5, EMC Solutions Enabler 7.5.1,

EMC Solutions Enabler 7.6

No remark

No remark

No remark

No remark

No remark

No issue for switch upgrad

The HBA installaed on the system is

LPe1105-HP (Emulex LPe1105-HP 4Gb FC

HBA for HP c-Class Bladesystem (403621-

B21)) recommended bios version 3.11a5,

driver 2.50.007, 2.70.018 and firmware level

2.82a4

No remark

No remark

Name Issue Type

dpaivmwhve01p.sgxdo.sgx.com

dpaivmwhve02p.sgxdo.sgx.com

dsaivmwhve01p.sgxdo.sgx.com

dsaivmwhve04p.sgxdo.sgx.com

dsaivmwhve05p.sgxdo.sgx.com

dsaivmwhve06p.sgxdo.sgx.com

dsaivmwhve07p.sgxdo.sgx.com

dsaivmwhve08p.sgxdo.sgx.com

dsaivmwhve09p.sgxdo.sgx.com

dsaivmwhve10p.sgxdo.sgx.com

dsaivmwhve11p.sgxdo.sgx.com

dsaivmwhve12p.sgxdo.sgx.com

dsaivmwhve13p.sgxdo.sgx.com

dsaivmwhve14p.sgxdo.sgx.com

dsaivmwhve15p.sgxdo.sgx.com

Description HCL Remark

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Nos issue detect by EMC grab

Name Issue Type

cdbal01, cdbnl01, cdbol01,

cdesal01, cdesnl01,

cdesol01, cengal01,

cengnl01, cengol01, crskal01,

crsknl01, crskol01

ClariionHostInteroperability

cdbal01, cdbnl01, cdbol01,

cdesal01, cdesnl01,

cdesol01, cengal01,

cengnl01, cengol01, crskal01,

crsknl01, crskol01

ClariionHostInteroperability

cdbal01, cdesal01, cdesnl01,

cdesol01, cengal01,

cengnl01, cengol01, crskal01,

crsknl01, crskol01

ClariionHostInteroperability

cdbal01, cdesal01, cdesnl01,

cdesol01, cengal01,

cengnl01, cengol01, crskal01,

crsknl01, crskol01

ClariionHostInteroperability

cdbnl01, cdbol01 ClariionHostInteroperability

cdbnl01, cdbol01 ClariionHostInteroperability

cdbnl01, cdesnl01, cengnl01,

crsknl01Veritas

cdbol01, cdesol01, cengol01,

crskol01HBA

cdbol01, cdesol01, cengol01,

crskol01IO Timeout

cdbol01, cdesol01, cengol01,

crskol01SolutionsEnabler

idmbl01 HBA

idmbl01, pdacq01, pddis01,

pddis02, pdorc01, ppacq01,

ppdis01, ppdis02, pporc01,

sapal01, SAPAL03, sapbl01,

sdacq01

Veritas

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

ClariionHostInteroperability

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

ClariionHostInteroperability

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

ClariionHostInteroperability

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

ClariionHostInteroperability

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

HBA

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

HBA

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

HBA

pdacq01, pddis01, pddis02,

pdorc01, ppacq01, ppdis01,

ppdis02, pporc01, sdacq01

HBA

pdacq01, pddis01, pddis02,

ppacq01, ppdis01, ppdis02Capacity

pdacq01, pddis01, pddis02,

ppacq01, ppdis01, ppdis02,

sdacq01

Capacity

pdacq01, pdorc01, ppacq01,

pporc01, sdacq01Basic System Information

pdacq01, pdorc01, ppacq01,

pporc01, sdacq01HBA

pdacq01, ppacq01, sdacq01 Capacity

pddis01 SolutionsEnabler

pddis01 SolutionsEnabler

pddis01, pddis02, ppdis01,

ppdis02Basic System Information

pddis01, pddis02, ppdis01,

ppdis02HBA

pdorc01 Capacity

pdorc01 Capacity

pdorc01, pporc01 Capacity

pdorc01, pporc01 Capacity

pdorc01, pporc01 Capacity

pdorc01, pporc01 Capacity

pdorc01, sdacq01 Capacity

pporc01 Capacity

pporc01 Capacity

pporc01 Capacity

sapal01 Capacity

sapal01 Capacity

sapal01 Capacity

sapal01 Capacity

sapal01 Capacity

SAPAL03 Capacity

sdacq01 Capacity

sdacq01, sddis01, sddis02 Capacity

sdacq01, sddis01, sddis02 Capacity

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

ClariionHostInteroperability

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

ClariionHostInteroperability

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

ClariionHostInteroperability

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

ClariionHostInteroperability

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

HBA

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

HBA

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

HBA

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

HBA

sdacq01, sddis01, sddis02,

sdorc01, spdis01, spdis02,

sporc01

Veritas

sdacq01, sdorc01, sporc01 Basic System Information

sdacq01, sdorc01, sporc01 HBA

sddis01 SolutionsEnabler

sddis01 SolutionsEnabler

sddis01, sddis02, spdis01,

spdis02Basic System Information

sddis01, sddis02, spdis01,

spdis02HBA

sddis02 OS Update

sddis02, spdis01, spdis02 OS Update

sddis02, spdis01, spdis02 SolutionsEnabler

sddis02, spdis01, spdis02 SolutionsEnabler

sdorc01 Capacity

sdorc01 Capacity

sdorc01 Capacity

sdorc01 Capacity

sdorc01 Capacity

sdorc01 Capacity

sdorc01 Capacity

spdis01 Capacity

spdis01 Capacity

spdis01 OS Update

spdis02 Capacity

spdis02 Capacity

sporc01 Capacity

sporc01 Capacity

sporc01 Capacity

sporc01 Capacity

sporc01 Capacity

Description HCL Remark

Storage Mgmt SW (Navisphere Host Agent 6.29) is not

recommended by EMC with detected Operating System.

Please refer to the ELAB CLARiiON Host Software

Interoperability Report.

Not required for Switch Upgarde

Unable to find any EMC supported versions for Navisphere

Host Agent 6.29Not required for Switch Upgarde

Unable to find any EMC supported versions for Navisphere

Classic CLI 7.31Not required for Switch Upgarde

Unable to identify Navisphere Classic CLI 7.31 as EMC

Qualified information.Not required for Switch Upgarde

Storage Mgmt SW (Navisphere Classic CLI 6.28) is not

recommended by EMC with detected Operating System.

Please refer to the ELAB CLARiiON Host Software

Interoperability Report.

Not required for Switch Upgarde

Unable to find any EMC supported versions for Navisphere

Classic CLI 6.28Not required for Switch Upgarde

Veritas ASL for EMC INVISTA Arrays not found Not required for Switch Upgarde

EMC qualifies detected HBA model (Emulex LPe1205-HP

8Gb FC HBA for HP c-Class Bladesystem (456972-B21))

but detected HBA Driver version (8.2.0.134) is not at

recommended level.

recomended driver version 2.70.018, Bios

2.12a9,firmware 2.82a4

errorVx disk group timeout error for disk group vg00-

please configure as suggested by Veritas

Unable to identify Solutions Enabler 7.1.1 as EMC Qualified

information.

Install any of the version which is recommended

bt EMC EMC Solutions Enabler 7.2, EMC

Solutions Enabler 7.2.1, EMC Solutions Enabler

7.3, EMC Solutions Enabler 7.3.1, EMC

Solutions Enabler 7.3.2, EMC Solutions Enabler

7.4, EMC Solutions Enabler 7.5, EMC Solutions

Enabler 7.5.1, EMC Solutions Enabler 7.6

EMC qualifies detected HBA model (A8003A-B/FC2242SR

(LPe11002)) but detected HBA Driver version (8.2.0.96.2p)

is not at recommended level. Recommended driver 2.70.018

Veritas ASL file not found

EMC CLARIION Array Support Library not found

Storage Mgmt SW (Navisphere Host Agent 6.29) is not

recommended by EMC with detected Operating System.

Please refer to the ELAB CLARiiON Host Software

Interoperability Report.

Not required for Switch Upgarde

Unable to find any EMC supported versions for Navisphere

Classic CLI 7.30Not required for Switch Upgarde

Unable to find any EMC supported versions for Navisphere

Host Agent 6.29Not required for Switch Upgarde

Unable to identify Navisphere Classic CLI 7.30 as EMC

Qualified information.Not required for Switch Upgarde

HBA is allowed but not listed in an EMC recommended

configuration.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

The EMC Qualified Host System information required to

validate the HBA driver for AD168A/FC2243 (LP11002) is

absent, so no recommendations can be made.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

The EMC Qualified Host System information required to

validate the HBA firmware for AD168A/FC2243 (LP11002)

is absent, so no recommendations can be made.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

This Host Bus Adapter(AD168A/FC2243 (LP11002)) is not

recommended by EMC with detected Operating

System(RHEL [32-Bit] 4.8 AS/ES). Please refer ELAB

Navigator to verify configuration.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

Volume Group sgxdeVG contains /dev/dm-1 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-0 which is

allocatable (but full)Not required for Switch Upgarde

Proliant DL385 did not match any E-Lab Navigator-identified

Host System.Not required for Switch Upgarde

Unable to determine Host System(Proliant DL385)

information.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

Volume Group sgxdeVG contains /dev/dm-3 which is

allocatable (but full)Not required for Switch Upgarde

Unable to find any EMC supported versions for Solutions

Enabler 7.0Not required for Switch Upgarde

Unable to identify Solutions Enabler 7.0 as EMC Qualified

information.Not required for Switch Upgarde

Proliant DL585 did not match any E-Lab Navigator-identified

Host System.Not required for Switch Upgarde

Unable to determine Host System(Proliant DL585)

information.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

Volume Group oradataVG contains /dev/dm-7 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-6 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-0 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-4 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-8 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-5 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-2 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-2 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-3 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-7 which is

allocatable (but full)Not required for Switch Upgarde

Mount point /oracle/P01/sapdata1 is 93% full Not required for Switch Upgarde

Mount point /oracle/P01/sapdata2 is 93% full Not required for Switch Upgarde

Mount point /oracle/P01/sapdata3 is 93% full Not required for Switch Upgarde

Mount point /oracle/P01/sapdata4 is 90% full Not required for Switch Upgarde

Mount point /oracle/stage is 96% full Not required for Switch Upgarde

Mount point /oracle/SMR/sapdata2 is 100% full Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-3 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-0 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-2 which is

allocatable (but full)Not required for Switch Upgarde

Storage Mgmt SW (Navisphere Host Agent 6.29) is not

recommended by EMC with detected Operating System.

Please refer to the ELAB CLARiiON Host Software

Interoperability Report.

Not required for Switch Upgarde

Unable to find any EMC supported versions for Navisphere

Classic CLI 7.30Not required for Switch Upgarde

Unable to find any EMC supported versions for Navisphere

Host Agent 6.29Not required for Switch Upgarde

Unable to identify Navisphere Classic CLI 7.30 as EMC

Qualified information.Not required for Switch Upgarde

HBA is allowed but not listed in an EMC recommended

configuration.Not required for Switch Upgarde

The EMC Qualified Host System information required to

validate the HBA driver for AD168A/FC2243 (LP11002) is

absent, so no recommendations can be made.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

The EMC Qualified Host System information required to

validate the HBA firmware for AD168A/FC2243 (LP11002)

is absent, so no recommendations can be made.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

This Host Bus Adapter(AD168A/FC2243 (LP11002)) is not

recommended by EMC with detected Operating

System(RHEL [32-Bit] 4.8 AS/ES). Please refer ELAB

Navigator to verify configuration.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

Veritas ASL file not found

EMC CLARIION Array Support Library not found

Proliant DL385 did not match any E-Lab Navigator-identified

Host System.Not required for Switch Upgarde

Unable to determine Host System(Proliant DL385)

information.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

Software Enabler (Solutions Enabler 6.4 (EOSL)) is not

recommended by EMC with detected Operating System and

Storage Array(s). Please refer to the ELAB Software

Enabler Report.

Not required for Switch Upgarde

Unable to find any EMC supported versions for Solutions

Enabler 6.4 (EOSL)Not required for Switch Upgarde

Proliant DL585 did not match any E-Lab Navigator-identified

Host System.Not required for Switch Upgarde

Unable to determine Host System(Proliant DL585)

information.

BIOS 2.11a0, Firmware Version 2.82a4, Driver

Version 8.0.16.47 This in kernel driver is only

available on errata kernels equal to or greater than

2.6.9-89.0.18.el Driver is integrated into the kernel

Symmetrix Microcode Patch Level 5671.80 is not at the

latest Patch Level 5671.82Not required for Switch Upgarde

Symmetrix Microcode Patch Level 5671.75 is not at the

latest Patch Level 5671.82Not required for Switch Upgarde

Software Enabler (Solutions Enabler 6.3 (EOSL)) is not

recommended by EMC with detected Operating System and

Storage Array(s). Please refer to the ELAB Software

Enabler Report.

Not required for Switch Upgarde

Unable to find any EMC supported versions for Solutions

Enabler 6.3 (EOSL)

Install any of the version which is recommended

bt EMC EMC Solutions Enabler 7.2, EMC

Solutions Enabler 7.2.1, EMC Solutions Enabler

7.3, EMC Solutions Enabler 7.3.1, EMC

Solutions Enabler 7.3.2, EMC Solutions Enabler

7.4, EMC Solutions Enabler 7.5, EMC Solutions

Enabler 7.5.1, EMC Solutions Enabler 7.6

Mount point /opt is 100% full

Mount point /oracle/log3 is 100% full Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-1 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-2 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-3 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-4 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-6 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/mpath/mpath12p1

which is allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/mpath/mpath13p1

which is allocatable (but full)Not required for Switch Upgarde

Symmetrix Microcode Patch Level 5773.138 is not at the

latest Patch Level 5773.176Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-4 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group sgxdeVG contains /dev/dm-5 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-15 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-8 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oradataVG contains /dev/dm-9 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-10 which is

allocatable (but full)Not required for Switch Upgarde

Volume Group oralogVG contains /dev/dm-11 which is

allocatable (but full)Not required for Switch Upgarde

Name Issue Type

ESXEKV01, ESXEKV02 HBA

ESXEKV01, ESXEKV02,

ESXSKV01, ESXSKV02,

ESXTKV01, ESXTKV02

HBA

ESXSKV01, ESXSKV02,

ESXTKV01, ESXTKV02HBA

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXSKV02 PowerPath

ESXEPV02 HBA

ESXEPV02, ESXSPV01 HBA

ESXSPV01 HBA

ESXSPV01, ESXTPV01 PowerPath

ESXTPV01 HBA

Description

EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem

(456972-B21)) but detected HBA Firmware version (2.00A4) is not at recommended level.

EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem

(456972-B21)) but detected HBA Driver version (8.2.1.79.28) is not at recommended level.

EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem

(456972-B21)) but detected HBA Firmware version (1.11A5) is not at recommended level.

MultiPath device vmhba0:C0:T0:L16 has policy: standby

MultiPath device vmhba0:C0:T0:L17 has policy: standby

MultiPath device vmhba0:C0:T0:L18 has policy: standby

MultiPath device vmhba0:C0:T0:L8 has policy: standby

MultiPath device vmhba0:C0:T1:L16 has policy: standby

MultiPath device vmhba0:C0:T1:L17 has policy: standby

MultiPath device vmhba0:C0:T1:L18 has policy: standby

MultiPath device vmhba0:C0:T1:L8 has policy: standby

MultiPath device vmhba0:C0:T2:L15 has policy: standby

MultiPath device vmhba0:C0:T2:L7 has policy: standby

MultiPath device vmhba1:C0:T0:L15 has policy: standby

MultiPath device vmhba1:C0:T0:L7 has policy: standby

MultiPath device vmhba1:C0:T1:L15 has policy: standby

MultiPath device vmhba1:C0:T1:L7 has policy: standby

MultiPath device vmhba1:C0:T2:L16 has policy: standby

MultiPath device vmhba1:C0:T2:L17 has policy: standby

MultiPath device vmhba1:C0:T2:L18 has policy: standby

MultiPath device vmhba1:C0:T2:L8 has policy: standby

EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem

(456972-B21)) but detected HBA Firmware version (2.00A4) is not at recommended level.

EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem

(456972-B21)) but detected HBA Driver version (8.2.1.79.28) is not at recommended level.

EMC qualifies detected HBA model (Emulex LPe1205-HP 8Gb FC HBA for HP c-Class Bladesystem

(456972-B21)) but detected HBA Firmware version (1.11A5) is not at recommended level.

MultiPath enabled with less than two paths.

No CIM provider installed for Emulex based Host Bus Adapter

HCL Remark

Recommended firmware 2.01a4

In-box driver

Recommended firmware 2.01a4

Recommended firmware 2.01a4

In-box driver

Recommended firmware 2.01a4

naa.60060480000290103372533030353736 vmhba5:C0:T3:L32

Cannot detect the driver