120133

STYLE 1520 ChromeSaberJet™ Nozzle

TECHNICAL SERVICE PARTS LIST

® Registered Trademark of Premier Farnell Corp.™Trademark of Premier Farnell Corp.

1

2

ASSEMBLY NOTES:

Use Parker O-Ring Lubricant or equivalent petroleum basedlubricant

Use Loctite 222 or PermabondLM 113

Use Low-Temp Lubriplate

4

61

711

34

9

8

1028

20

28

403327

26

5453

41

21

22

23

30

31

61

45

50/52

4739

62

242

5532

13

54 2553

25

28

3

5

43

OPERATING NOTES:

• Read Operating Instructions Before Use

• Open and Close Slowly

• Maximum Operating Pressure:

200 psi (14 bar)

�3

1

11

1

2

1

1

1

1

�3

2

BIM Inlet

76 7372 71 70

QUANTITY

ITEM NO. DESCRIPTION PART NUMBER 15201* Turbine Teeth 772153 12 Socket Head Cap Screw 767094 23 O-Ring 757309 14 O-Ring 757268 15 Retaining Ring 756106 16 Throat Sleeve 107944 17 O-Ring 757048 18 Throat 120127 19 Socket Head Set Screw 767088 310 O-Ring 757308 111† Bumper Assembly 15200011 113 Spring 769629 120 Pistol Grip 718233 121 Flat Washer 784093 122 Lock Washer 784090 123 Socket Head Cap Screw 763064 125* O-Ring 757265 226 Handle 721427 127* Roll Pin 744062 228 Socket Head Set Screw 766015 230 O-Ring 757052 131 O-Ring 757105 132 O-Ring 757042 133* O-Ring 757269 234 O-Ring 757323 139 Baffle Gasket 714214 140 Trunnion 118527 241* Ball 703567 142 Turbine Retaining Ring 120128 143 Nozzle Body 120129 145 Pistol Grip Shutoff Body 120131 147 Gasket Retainer 120125 150 Nozzle Body Band 703599 152 Fog Band 703600 153* Seat 769245 254* O-Ring 757281 255 5/8" Tip 120126 161 1520 Pattern Indicator Band 703590 162 Baffle Head 118521 170 Swivel Adapter 118605 171 Socket Head Set Screw 7-65-008 172 Ball Bearings 7-04-030 3873 O-Ring 7-57-256 176 BIM Adapter 120132 1

Not Shown Smooth Bore Label 704732 1

STYLE 1520 ChromeSaberJet™ Nozzle

TECHNICAL SERVICE PARTS LIST

© Premier Farnell Corporation. 2000 All rights reserved. No portion of this can bereproduced without the express written consent of Premier Farnell Corporation.

PHONE: 330.264.5678 or 800.228.1161 I FAX: 330.264.2944 or 800.531.7335 I www.akronbrass.comAvailable in Canada through AKRON MANUFACTURING COMPANYPHONE: 519.773.8431 I FAX: 519.773.3794

WARRANTY AND DISCLAIMER: We warrant Akron Brass products for a period of five (5) years after purchase against defects in materials or workmanship. Akron Brass will repair or replaceproduct which fails to satisfy this warranty. Repair or replacement shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service.

We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or modification after delivery; damage; failure tofollow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTYSTATEMENT, AND WE DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential,incidental or indirect damages (including, but not limited to, any loss of profits) from any cause whatsoever. No person has authority to change this warranty.

ISO 9001 REGISTERED COMPANY

REVISED 11/05

* Parts included in Field Service Kit # 9183† A new pattern band item #61 is required