14.04 Style 99 Plain End Fittings |...
Transcript of 14.04 Style 99 Plain End Fittings |...
Victaulic Plain End Fittings are designed for use with Style 99 Roust-A-Bout® couplings in conjunction with plain end or beveled end pipe. Fittings are cast of ductile iron and finished with a dip coat of enamel. Hot dip galvanizing and other coatings are available.
Plain End Fittings are of full flow design to provide maximum flow. In some sizes and styles, welded steel fittings are supplied. Victaulic long radius fittings are available in many sizes and styles.
MATERIAL SPECIFICATIONS Housing: Ductile iron conforming to ASTM A-395, grade 65-45-15, and ASTM A-536, grade 65-45-12.
Nipples: (Adapter, swaged & hose). • 1-1½"–Carbonsteel,Schedule40,conformingtoASTMA-53,TypeF. • 2-6"–Carbonsteel,Schedule40,conformingtoASTMA-53,TypeEorS,Gr.B. • 8-12"–Carbonsteel,Shedule30,conformingtoASTMA-53,TypeEorS,Gr.B. • Steel–Carbonsteel,forged.
Steel, Segmentally Welded: (See steel, Nipples Specifications)
Fitting Coating: Orange enamel
• Optional:Hotdippedgalvanizedandothers.Somefittingssuppliedelectroplatedasstandard–see product specifications.
WARNING
Victaulic plain end fittings must be used with Style 99 Roust-A-Bout couplings.
WARNING
DIMENSIONSPlain End Fittings Required Tangent Length
Roust-A-Bout
Fitting Size Min. Fitting Size Min. Fitting Size Min. Fitting Size Min.Tang. Tang. Tang. Tang.
Nominal Actual Length Nominal Actual Length Nominal Actual Length Nominal Actual LengthDia. Out. Dia. “T” Dia. Out. Dia. “T” Dia. Out. Dia. “T” Dia. Out. Dia. “T”
Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inches Inchesmm mm mm mm mm mm mm mm mm mm mm mm
1 ½40
1.90048.3
1.5038
3½90
4.000101.6
1.7545
165.1 mm 6.500165.1
2.1354
12300
12.750323.9
2.2557
2 2.375 1.75 4 4.500 2.00 8 8.625 2.25 14 14.000 2.2550 60.3 45 100 114.3 51 200 219.1 57 350 355.6 57
2 ½ 2.875 1.75 5 5.563 2.13 10 10.750 2.25 16 16.000 2.2565 73.0 45 125 141.3 54 250 273.0 57 400 406.4 57
3 3.500 1.75 6 6.625 2.1380 88.9. 45 150 168.3 54
T
T
14.04_1
Plain End FittingsSTYLE 99
14.04IPS CARBON STEEL PIPE – PLAIN END SYSTEM
JOB/OWNER CONTRACTOR ENGINEER
System No. ______________________________ Submitted By ____________________________ Spec Sect _______________ Para ___________
Location ________________________________ Date ___________________________________ Approved _______________________________
Date ___________________________________
www.victaulic.comVICTAULICISAREGISTEREDTRADEMARKOFVICTAULICCOMPANY.©2011VICTAULICCOMPANY.ALLRIGHTSRESERVED.
REV_F
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS
No. 10P No. 11P No. 20P No. 30P (sw)Fitting Size 90° Elbow 45° Elbow Tee 45° Lateral
Nominal Actual Aprx. Aprx. Aprx. Aprx.Size Out. Dia. C to E Weight C to E Weight C to E Weight Weight
Inches Inches Inches Lbs Inches Lbs Inches Lbs C to LE C to SE Lbsmm mm mm kg mm kg mm kg In./mm In./mm kg
1 1.315 2.25 0.6 1.75 0.6 2.25 (sw) 1.0 5.00 2.25 3.525 33.7 57 0.3 44 0.3 57 0.5 127 57 1.6
1 ½ 1.900 4.00 (sw) 1.4 2.88 (sw) 1.0 2.75 (sw) 1.7 6.25 2.75 3.540 48.3 102 0.6 73 0.5 70 0.8 159 70 1.6
2 2.375 4.75 (sw) 2.9 3.13 (sw) 1.4 3.25 (sw) 3.0 7.25 2.75 5.150 60.3 121 1.3 80 0.6 83 1.4 184 70 2.3
2 ½ 2.875 5.50 (sw) 3.9 3.50 (sw) 2.3 3.75 (sw) 6.8 7.75 3.00 9.365 73.0 140 1.8 89 1.0 95 3.1 197 76 4.2
3 3.500 6.25 (sw) 6.15 3.75 (sw) 4.3 4.25 (sw) 9.0 8.75 3.25 12.880 88.9 159 2.8 95 2.0 108 4.1 222 83 5.8
3 ½ 4.000 7.00 (sw) 7.0 4.00 (sw) 5.5 5.50 (sw) 12.5 10.00 3.50 20.090 101.6 178 3.2 102 2.5 140 5.7 254 89 9.1
4 4.500 7.75 (sw) 9.9 4.25 (sw) 7.0 5.00 11.9 10.75 3.75 19.0100 114.3 197 4.5 108 3.2 127 5.4 263 95 8.6
5 5.563 9.50 20.4 5.13 (sw) 18.0 6.88 (sw) 17.1 12.75 4.00 30.0125 141.3 241 9.3 130 8.2 175 7.8 324 102 13.6
6 6.625 6.50 20.4 3.50 11.9 6.50 29.5 14.00 4.50 43.3150 168.3 165 9.3 89 5.4 165 13.3 356 114 19.6
8 8.625 10.00 (sw) 42.0 6.00 (sw) 28.5 10.00 (sw) 71.5 18.00 6.00 92.0200 219.1 254 19.1 152 12.9 254 32.4 457 152 41.7
10 10.750 11.50 (sw) 50.0 6.50 (sw) 41.0 11.50 (sw) 116.0 20.75 6.50 106.0250 273.0 292 22.7 165 18.6 292 52.6 527 165 48.1
12 12.750 13.50 (sw) 156.0 7.00 (sw) 57.8 13.50 (sw) 120.0 24.50 7.00 167.0300 323.9 343 70.8 178 26.2 343 54.4 622 178 75.8
(sw) = Segmentally welded steel
DIMENSIONSPlain End Fittings
C to E
C to E
C to E
C toLE
C toSE
No. 25PReducing Tee
No.25P Reducing Tee
Size Aprx.Nominal C to E WeightInches Inches Lbs
mm mm kg
Size Nominal Inches
mm
C to EInches
mm
Aprx.Weight
Lbskg
1½40 × 1½
40 × 125
4.00102
2.21.0
6150 × 6
150 × 4100
7.63194
26.211.9
250 × 2
50 × 125
4.25108
2.91.3
8200 × 8
200 × 250
10.00254
42.015.2
1½40
4.25108
3.11.4
380
10.00254
44.020.0
380 × 3
80 × 125
5.13130
6.73.0
4100
10.00254
46.020.9
1½40
5.13130
6.93.1
5125
10.00254
48.021.8
250
5.13130
7.13.2
6150
10.00254
50.022.7
4100 × 4
100 × 125
5.88149
10.94.9
10250 × 10
250 × 4100
11.50292
74.033.6
1½40
5.88149
11.15.0
6150
11.50292
78.035.4
250
5.88149
11.35.1
8200
11.50292
86.039.0
2½65
5.88149
11.65.3
12300 × 12
300 × 6150
13.50343
112.050.8
380
5.88149
11.95.4
8200
13.50343
118.053.5
6150 × 6
150 × 250
7.63194
24.711.2
10250
13.50343
130.059.0
380
7.63194
25.411.5
C to E
Plain End FittingsSTYLE 99
14.04IPS CARBON STEEL PIPE – PLAIN END SYSTEM
www.victaulic.comVICTAULICISAREGISTEREDTRADEMARKOFVICTAULICCOMPANY.©2011VICTAULICCOMPANY.ALLRIGHTSRESERVED.
14.04_2 REV_F
No. 33P (sw) No. 35P (sw) No. 61P SteelFitting Size 90° Wye Cross Bull Plug
Nominal Actual Aprx. Aprx.Size Out. Dia. C to LE C to SE Weight C to E Weight
Inches Inches Inches Inches Lbs Inches Lbs C to LEmm mm mm mm kg mm kg In./mm
1 1.315 3.25 2.25 1.1 3.25 1.7 3.0025 33.7 83 57 0.5 83 0.8 76
1 ½ 1.900 4.00 2.75 1.8 4.00 3.5 3.5040 48.3 102 70 0.8 102 1.6 89
2 2.375 4.25 2.75 2.9 4.25 5.2 4.0050 60.3 108 70 1.3 108 2.4 102
2 ½ 2.875 4.75 3.00 9.0 4.75 5.4 5.0065 73.0 121 76 4.1 121 2.4 127
3 3.500 5.13 3.25 8.5 5.13 8.5 6.0080 88.9 130 83 3.9 130 3.9 152
3 ½ 4.000 5.50 3.50 10.0 5.50 9.0 6.5090 101.6 140 89 4.5 140 4.1 165
4 4.500 5.88 3.75 14.0 5.88 10.8 7.00100 114.3 149 95 6.4 149 4.9 178
5 5.563 6.88 4.00 21.6 6.88 20.0 8.50125 141.3 175 102 9.8 175 9.1 216
6 6.625 7.63 4.50 31.2 7.63 30.0 10.00150 168.3 194 114 14.2 194 13.6 254
8 8.625 10.00 6.00 36.0 10.00 66.4 11.0200 219.1 254 152 16.3 254 30.1 279
10 10.750 11.50 6.50 52.0 11.50 103.0 13.00250 273.0 292 165 23.6 292 46.7 330
12 12.750 13.50 7.00 81.2 13.50 158.0 14.00300 323.9 343 178 36.8 343 71.7 356
(sw) = Segmentally welded steel
DIMENSIONSPlain End Fittings
C to LE
C toSE
No. 33P
C to E
No. 35P
E to E
No. 61P
E to E
No.53P Swaged Nipple
Size Aprx.Nominal E to E WeightInches Inches Lbs
mm mm kg
Size Aprx.Nominal E to E WeightInches Inches Lbs
mm mm kg
Size Aprx.Nominal E to E WeightInches Inches Lbs
mm mm kg
1½40 × 1
254.50114
1.20.6
4100 × 2
509.00229
7.53.4
6150 × 4
10012.00305
17.07.7
250 × 1
256.50165
2.00.9
2½65
9.00229
7.53.4
5125
12.00305
17.07.7
1 ½40
6.50165
2.00.9
380
9.00229
7.53.4
3200 × 3
8013.00330
29.013.2
2½65 × 1
257.00178
3.01.4
3½90
9.00229
7.53.4
4100
13.00330
29.013.2
1½40
7.00178
3.01.4
5125 × 2
5011.00279
11.55.2
5125
13.00330
29.013.2
250
7.00178
7.13.2
380
11.00279
11.55.2
6150
13.00330
48.021.8
380 × 1
258.00203
4.52.0
4100
11.00279
11.55.2
10250 × 3
8015.00381
48.021.8
1 ½40
8.00203
4.52.0
6150 × 1
2512.00305
16.07.3
4100
15.00381
48.021.8
250
8.00203
4.52.0
1½40
12.00305
16.07.3
6150
15.00381
48.021.8
2 ½65
8.00203
4.52.0
250
12.00305
17.07.7
8200
15.00381
48.021.8
3½90 × 3
808.00203
6.83.1
2½65
12.00305
17.07.7
12300 × 6
15016.00406
59.026.8
4100 × 1
259.00229
7.53.4
380
12.00305
17.07.7
8200
16.00406
59.026.8
1½40
9.00229
7.53.4
3½90
12.00305
17.07.7
10250
16.00406
59.026.8
No.53P Swaged Nipple
14.04_3
Plain End FittingsSTYLE 99
14.04IPS CARBON STEEL PIPE – PLAIN END SYSTEM
www.victaulic.comVICTAULICISAREGISTEREDTRADEMARKOFVICTAULICCOMPANY.©2011VICTAULICCOMPANY.ALLRIGHTSRESERVED.
REV_F
Adapter NipplesFitting Size Fitting Size
Nominal Actual Aprx. Nominal Actual Aprx.Size Out. Dia. Weight Size Out. Dia. Weight
Inches Inches E to E Lbs Inches Inches E to E Lbsmm mm In./mm kg mm mm In./mm kg
1 1.315 3.00 0.9 3 3.500 4.00 2.525 33.7 76 0.4 80 88.9 102 1.1
1 ½ 1.900 4.00 0.9 4 4.500 6.00 5.42 48.3 102 0.4 100 114.3 152 2.5
2 2.375 4.00 1.2 6 6.625 6.00 9.450 60.3 102 0.5 150 168.3 152 4.3
2 ½ 2.875 4.00 1.965 73.0 102 0.9
E to E E to E
E to E
No. 42P No. 43P
No. 40P
Plain End FittingsSTYLE 99
14.04IPS CARBON STEEL PIPE – PLAIN END SYSTEM
www.victaulic.comVICTAULICISAREGISTEREDTRADEMARKOFVICTAULICCOMPANY.©2011VICTAULICCOMPANY.ALLRIGHTSRESERVED.
14.04_4 REV_F
Fitting Size 90° Elbows 45° Elbows
No. 10P No. 11PSeg. Welded Steel Seg. Welded Steel
Nominal Size
Inches mm
125
1 ½ 40
250
2 ½65
380
3 ½90
4100
5125
6150
165.1 mm
8200
10250
12300
Actual Out. Dia. Inches
mm
1.31533.7
1.900 48.3
2.375 60.3
2.87573.0
3.50088.9
4.000101.6
4.500114.3
5.563141.3
6.625168.3
6.500165.1
8.625219.1
10.750273.0
12.750323.9
Aprx. Aprx.C to E Weight C to E WeightInches Lbs Inches Lbs
mm kg mm kg
3.25 0.9 2.63 0.883 0.4 67 0.4
4.00 1.7 2.88 1.4102 0.8 67 0.6
4.75 2.7 3.13 2.0121 1.2 80 0.9
5.50 4.8 3.50 3.5140 2.2 89 1.6
6.25 7.2 3.75 4.8159 3.3 95 2.2
7.00 9.4 4.00 6.2178 4.3 102 2.8
7.75 12.3 4.25 8.0197 5.6 108 3.6
9.50 13.4 5.13 9.2241 6.1 130 4.2
11.00 31.0 5.75 18.5279 14.1 146 8.4
- - - -- - - -
10.00 38.7 6.00 24.9254 17.6 152 11.3
11.50 52.1 6.50 32.8292 23.6 159 14.9
13.50 76.7 7.00 47.5343 34.8 178 21.6
DIMENSIONSPlain End Fittings
CtoE
No. 10P
C to E
No. 11P
Fitting SizeNo. 100P
90° Long Radius ElbowNo. 110P
45° Long Radius Elbow
Nominal Size
Inches mm
Actual Out. Dia. Inches
mm
C to EInches
mm
Aprx.Weight
Lbskg
C to EInches
mm
Aprx.Weight
Lbskg
250
2.375 60.3
4.75121
2.51.1
3.1380
1.80.8
2 ½65
2.87573.0
5.50140
4.01.8
3.5089
2.51.1
380
3.50088.9
6.25159
6.53.0
3.7595
4.52.0
4100
4.500114.3
8.00203
11.55.2
4.50114
7.53.4
6150
6.625168.3
11.13283
28.512.9
5.88149
17.37.9
8200
8.625219.1
14.13359
56.725.7
7.13181
24.015.4
10250
10.750273.0
17.13435
96.543.8
8.38213
57.025.9
12300
12.750323.9
20.13511
145.065.8
9.63245
95.043.1
Long Radius Elbows
C to E
No. 100P
C to E
No. 110P
14.04_5
Plain End FittingsSTYLE 99
14.04IPS CARBON STEEL PIPE – PLAIN END SYSTEM
www.victaulic.comVICTAULICISAREGISTEREDTRADEMARKOFVICTAULICCOMPANY.©2011VICTAULICCOMPANY.ALLRIGHTSRESERVED.
REV_F
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details.
This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.
NOTE
ReferenceshouldalwaysbemadetotheI-100VictaulicFieldInstallationHandbookfortheproductyouareinstalling.HandbooksareincludedwitheachshipmentofVictaulicproductsforcompleteinstallation and assembly data, and are available in PDF format on our website at www.victaulic.com.
INSTALLATION
Plain End FittingsSTYLE 99
14.04IPS CARBON STEEL PIPE – PLAIN END SYSTEM
For complete contact information, visit www.victaulic.com14.04 18884 REV F UPDATED 05/2011VICTAULICISAREGISTEREDTRADEMARKOFVICTAULICCOMPANY.©2011VICTAULICCOMPANY.ALLRIGHTSRESERVED.
14.04