1352-SERIES Electrically Operated Ball Valve Technical Specifications

Data Sheet Ref. No : SU-1352-00001

SUDE PUNE / BANGALORE

MODEL NO.:

1352\50\40\BSP\RB\CS\S6\T\PROP\

SD-1000-05\CPT200\POT\2LS\SERVO Quotation Ref. No

Quotation Date 1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED WITH

SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR 2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm

Port Size 40mm

End connection BSP Screwed

Body Material Carbon Steel Ball Material SS316

Seating material Teflon

Flowing medium Non-injurious to Body Ball & Seals

Pressure 10 Bar

Type of construction

Reduce Bore Single piece design, Antistatic fire safe

Ball valve

Temperature Ambient

Characteristic Proportionate

Fitted with

Sdtork Make Single Phase Quarter Turn Electric Actuator Supply Voltage 230 V AC.

ACTUATOR DETAILS 3.1 Model SD-1000-05 3.2 Output motion type 3.3 Output Torque ( Nm ) 3.4 Output speed ( Sec/90 °) 3.5 Manual hand wheel PROVIDED 3.6 Travel limit switches

2 Nos Type : 1 NO + 1 NC, change over contact, contact rating: 5 A, 230 V AC

3.7 Torque limit switches Not required, AS 1000-series actuator are provided with stall duty motor

3.8 Local indicator PROVIDED 3.9 Class of Protection IP65 3.10 Weight of the actuator (Kgs.) 3.11 Duty 3.12 Mounting 3.14 G. A. Drawing Reference No 3.15 Electrical Wiring Diagram Ref, No 3.16 Weight of Actuator – Kgs MOTOR DETAILS 4.1 Type Reversible Single Phase Synchronous Stall Duty Motor 4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply

4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr. 4.4 Insulation Class F 4.5 Rating ( Watts) OPTIONAL ACCESSORIES 5.1

Feedback Potentiometer

Out put : 100-235 Ohms Provided

5.2

Additional Limit Switches

Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC

Provided

5.3

Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A

Provided

5.4

Remote Position indicator

Available in servo controller Digital : 0-100 %

Provided

5.5

Servo controller (Valve positioner) Panel Mounted

Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.

Provided

5.6 Interface Card Input signal : 4-20 m A, Feed back : 100-235 Ohms,

Provided

5.7 Local Push Button Station

This will consist of Auto /Off / Manual selector switch, Open/Close push buttons.

Provided

6 GENERAL POINTS 6.1 Inspection By Customer at our works

6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation

which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :