1349445838.8964_9100QB0904 Prolog Lite (web version).pdf

7/29/2019 1349445838.8964_9100QB0904 Prolog Lite (web version).pdf

1/2

LaboratoryMonitoring

Systems

Contronics Limited

Greenfield Farm Estate

Congleton Cheshire

CW12 4TU

Phone

+44 (0) 1260 298 383

Fax

+44 (0) 1260 298 387

[email protected]

www.contronics.co.uk

tron csinoc

The Control Program can

also display and print

composite trend graphs

showing all the sensors

connected to any piece

of equipment for any

timeframe . . .

The Control Program

can sort the

complete audit trail

back to system

switch-on by

timeframe, event

type, equipment,

sensor and

department . . .

Alerter

The Alerter is a pop-up application. It can be installed on

any PC with access to the network. Users can configure

the program to respond

only to alarms from

relevant departments.

Alerter provides real

time audible and visual

indication of alarm

conditions. The pop-updisplay mirrors the alarm

information displayed on

an InfoPoint.

A remote user can accept alarms using the Control

Program. The audit trail is maintained whether the alarm

is accepted using the InfoPoint or the Control Program.

Working together

We work closely with our customers from the initial user

requirement specification through to system acceptance.

We can temperature map your equipment and provide

documented justification for sensor positions.

Our engineers will install, commission, calibrate and

validate your system and train your staff. We will work

with you to generate the qualification protocols you needto satisfy your regulatory requirements.

Support you can rely on

A one year, on-site, parts and labour warranty

demonstrates our confidence in our systems.

On-going maintenance agreements preserve your

investment in Contronics systems. We look after

preventative maintenance and scheduled annual

calibration, validation and mapping and prepare a

comprehensive documentation pack ready for your

regulatory inspection.

Specification

Prolog Lite (with integral InfoPoint)

Network connection Ethernet

System capacity 25/50/100 sensors

Channel configuration (max) 4 sensors + 4 contact inputs

Database MySQL

Audit trail + data log Back to commissioning

Channel titles + alarm messages User configurable

Alarm management Via InfoPoint or Control Program

Off site alarms Email to on-call staff

Mobile alert to smartphone

UPS runtime 15 minutes

Dimensions 385 x 375 x 75 (WxHxD)

InfoPoint


Display 17 colour LCD

1024 x 768 SVGA resolution

User interface Touch screen navigation

with on-screen keyboard

UPS runtime 15 minutes

Dimensions 385 x 375 x 75 (WxHxD)

DataNode (specification for 16 input DataNode)


Inputs 16 analogue

16 contact

4 serial

Outputs 4 changeover relays

Sensor types Temperature

Relative humidity

Oxygen depletionCarbon dioxide level

Differential pressure

Particle count

Voltage/current input

Door contact

Panic button

Motion detector

Measurement reso lution 0.1C or 0.1% ful l sca le

Measurement accuracy 0.2C or 0.2% ful l sca le

Log interval 1 to 99 minutes

Stored data 1 week at 1 min log interval

Alarm levels 4

Alarm delays 0 to 99 minutes

UPS runtime 6 hours

Dimensions 384 x 470 x 58mm (WxHxD)

9100QB0904

7/29/2019 1349445838.8964_9100QB0904 Prolog Lite (web version).pdf

2/2

tron csinoc

Prolog Lite

Prolog Lite is the latest addition to our world-class range of

environmental monitoring systems. The system is 21CFR11

Part 11 and GAMP compliant and will satisfy MHRA

requirements. It is a multi-user system with the capacity to

monitor up to 100 points distributed over multiple sites. It

monitors a complete facility whilst maintaining departmental

separation and responsibility. Prolog Lite combines the server

and InfoPoint in a single, wall-mounted unit.

The server uses an industry standard MySQL database. It

stores the system configuration information and accumulates

measurements from DataNodes. It also maintains a secure

audit trail of alarms, alarm acceptances, settings changes and

all system events and actions taken. Prolog Lite makes

scheduled automatic database backups to a nominated server

on the network.

The system is highly resilient. Logged data is duplicated in

the database and in DataNode. If the network connection to

DataNode is interrupted, missing database information will be

automatically retrieved when the network connection is

restored.

The system generates four alarms per sensor; upper and lower

warning levels and upper and lower alarm levels.

Prolog Lite will send email containing detailed alarm

information to predefined addresses: including smartphones.

Separate addresses can be defined for each department.

Departmental responsibility is achieved by configuringInfoPoint displays to respond only to alarms for specific

departments.

As shown in the diagram above, Prolog Lite is connected by a

standard Ethernet network to distributed DataNodes which

collect and store data from local sensors. Local InfoPoints

display alarms and information only from equipment for

which the department is responsible.

ProLog Lite software is being continuously developed to

reflect the changing needs of users and to ensure that the

system complies with current legislation and practice.

Software updates are offered free of charge during warranty

and subsequent maintenance agreements.

InfoPoint

The 17, wall-mounted, colour LCD touch-screen display and

intuitive user interface mean that InfoPoint is simple to use,

easy to understand and minimises training.

InfoPoint displays alarm conditions, current sensor values and

settings, audit trail information and trend graphs.

Alarms can be accepted, channels can be inhibited and

temporary disables initiated (eg for defrost). All the

frequently used system operation and maintenance functions

are included.

InfoPoint uses an index card metaphor to simplify navigation.

Touching the tab at the top of the screen changes the display

mode.

When an alarm occurs, InfoPoint generates an audible and

visual alarm, jumps to the alarm tab and displays the alarm

information and advisory text . . .

Username and password are necessary to accept alarms and a

user comment is required for the audit trail. These are

entered using the on-screen keyboard . . .

Sensor data is displayed graphically . . .

An image can be

inserted on the status

page to provide more

information . . .

InfoPoints can be

distributed

throughout a facility

as required and alarm notifications can be transferred to a

different InfoPoint when a department is not staffed.

InfoPoints UPS ensures operation is maintained during

changeover to emergency supply.

DataNode

DataNode accepts up to 16 analogue inputs, 16 contact

inputs and 4 serial inputs. In addition, 8/4/2 analogue input

versions are available to minimise system cost for smaller

applications. The minimum logging interval is 1 minute.

At this setting, DataNode stores 1 week of local data.

DataNode makes continuous analogue sensor measurements

at 1-second intervals and stores the worst excursion during

the logging interval in the database. It accepts a range of

inputs as shown in the specification on the back page.

The serial inputs interface with particle counters and other

intelligent sensors.

DataNode has 4 relay outputs. These can be configured to

change state for any combination of alarms and used, for

example, for local alarm indication.

Each channel (or piece of equipment) can be configured to

include up to 4 analogue or serial inputs and 4 contact inputs.

A UPS is installed to enable DataNode to continue logging if

the mains supply fails.

Control ProgramThe Control Program is used to configure and control a

ProLog system. The Control Program is a web application;

this means that any PC on the network can access this

program using a familiar web browser.

The system manager specifies the users who have access to

the system and attaches users to departments.

Usernames, passwords and the required level of access

permissions are allocated to users so that they can configure

and maintain the system, accept alarms and alter settings

within their designated departments.

Details of alarm acceptances, settings changes and any other

interventions are recorded in a secure audit trail along with

users name and comments.

A channel is configured for each piece of equipment attached

to the system. Sensors are assigned to a channel and upperand lower warning and alarm levels are set. The channel

names, sensor names, alarm messages and optional channel

and sensor advisory text are entered. The equipment supplier,

part number and serial number are also recorded . . .

Central action point

Prolog lite

Central action point Remote site without local action pointR

emo te s it e w it ho ut local act io n p oint Major d ep ar tmen t w it h local act io n p ointM

ajor department with local action point Smaller department without local action pointS

maller department without local action point

Email

Smartphone

roog ie

Motion detection

Panic button

Door contact

Current input

oltage input

V

Particle count

ferential pressure

Dif

Carbon dioxide level

Oxygen depletion

Relative humidity

emperature

T

InfoPoint

Motion detection

Panic button

Door contact

Current input

V

Particle count

Dif


Oxygen depletion

Relative humidity

T

Motion detection

Panic button

Door contact

Current input

oltage inputV

P

article count

ferential pressureDif


Oxygen depletion

Relative humidity

mperature

Motion detection

Panic button

Door contact

Current input

oltage input

V

Particle count

ferential pressure

Dif


Oxygen depletion

Relative humidity

emperature

T

Email

Alerter + Control Program

required access permissions running

Remote user with passwords and


required access permissions running

Remote user with passwords and

Internet


Networked PC running

Ethernet network



InfoPoint







LaboratoryMonitoringSystems

1349445838.8964_9100QB0904 Prolog Lite (web version).pdf

Documents

Transcript of 1349445838.8964_9100QB0904 Prolog Lite (web version).pdf