SIGNAL SNOWBOARDS 13.14 SEASON

Ten years ago we started this company sitting at a kitchen table. It would still be a full season before our boards hit the shelves, but

our course was set. We’d like to thank all of you who have joined us on our mission.

Here’s to the next decade!

PLAY

GRO

UND SERIES

TEAM SERIES

BACK COUNTRY SERIES

There’s quite a few

change-ups in the Signal line this year. First of all, we have categorized our

boards into three series. Then we went and added some new boards into them, like the

FREEDOM MACHINES. We reworked some old favorites and, after careful consideration, even left some alone.

After all of the geometry and shapes were set, we turned to our bases. We have so much fun with our Every Third Thursday bases that we couldn’t resist using the knife

cutter for the whole line. You’re going to see a lot of new die-cuts this season.

All Signal boards are made in our Huntington Beach factory. We hope you’re as excited about this

season as we are and we wish you a very prosperous and fulfilling year.

Now go out there and have some fun!

NEWVITA PARK TOP

PLAYGROUND SERIES PARK, FLAT PARK, VITA PARK, ROCKER LIGHT AND VITA ROCKER

NEWPARK & FLAT PARK TOP

PARK & FLAT PARK ASSORTED BASES ROCKER LIGHT TOP ROCKER ASSORTED BASESVITA ASSORTED BASES

The name says it all! From jibbing the monkey bars to airing off the slide, the PLAYGROUND SERIES is comprised of boards that are made for making the most of the park. The PLAYGROUND offers an assortment of camber options and flexes that are sure to dial-in every big and little kid that just wants to have fun!

PARKS ( Flat or Camber ): New blunted shapeVITA PARKS: New shape and sizing, new core profile • matte silkscreen top sheet for the PARKS • sublimated topsheets for the VITA PARKS • knife-cut sintered Durasurf base • ABS sidewall • Durasurf tip and tail fill • Park Profile Poplar core • triaxial glass on the bottom / triaxial glass on the top • radial sidecut that meets in the center of the board • True twin Park shape • ETT inspiredROCKER LIGHTSVITA ROCKER • sublimated topsheets • knife-cut sintered Durasurf base • ABS sidewall • Durasurf tip and tail fill • Park Profile Poplar core • triaxial glass on the bottom / triaxial glass on the top • Radial sidecut that meets in the center of the board • True twin shape • 5 degrees of lift on the nose and tail

Park 146 Park 148 Park 150 Park 152 Park 154 Park 156

Kids Flat Park 134 Kids Flat Park 142 Flat Park 146 Flat Park 148 Flat Park 150 Flat Park 152 Flat Park 154 Flat Park 156

Vita Park 142 Vita Park 146 Vita Park 148 Vita Park 150

Rocker Light148Rocker Light 150Rocker Light 152Rocker Light 154Rocker Light 156

Vita Rocker 143 Vita Rocker 147 Vita Rocker 151

110.89 N/A 739.36 17.55 23.9 27.91 51->63 113.60 N/A 745.57 17.75 24.0 28.14 51->63 113.93 N/A 759.62 18.04 24.5 28.67 52->64 115.45 N/A 769.7 18.28 24.9 29.05 52->64 116.97 N/A 779.9 18.52 25.2 29.43 52->64 118.49 N/A 790 18.76 25.5 29.82 53->65

102 N/A 679 16 21.9 25.6 45->57 108 N/A 719 17.1 23.2 27.1 50->62 110.89 N/A 739.36 17.55 23.9 27.91 51->63 113.60 N/A 745.57 17.75 24.0 28.14 52->64113.93 N/A 759.62 18.04 24.5 28.67 52->64 115.45 N/A 769.70 18.28 24.9 29.05 52- >64116.97 N/A 779.90 18.52 25.2 29.43 52->64 118.49 N/A 790.00 18.76 25.5 29.82 53->65

108 N/A 719 17.1 23.2 27.1 50->62 110.89 N/A 739.36 17.55 23.9 27.91 51->63 113.6 N/A 745.57 17.75 24.0 28.14 51->63 113.93 N/A 759.62 18.04 24.5 28.67 51->63

112 77 740.00 17.5 23.7 27.8 52- >64115 77 760.00 18.1/17.1 24.00 23.7 52- > 64 115 77 760.00 18 24.3 28.6 52- >65117 77 770 18.2 24.6 29.0 53- >65118 78 770 18.47 24.6 29.0 54- >66 109 72 720 17 23.0 27.1 50->62 112 78 750 17.5 23.7 27.8 51->63 115 80 760 18 24.3 28.6 52->64

PARK, FLAT PARK, VITA PARK, ROCKER LIGHT AND VITA ROCKER

ROCKER ASSORTED BASES VITA ROCKER TOP VITA ASSORTED BASES

EFFE

CTIV

E ED

GE

SECO

ND

ARY

CO

NTA

CT

SID

ECU

T

TIP

& T

AIL

LEN

GTH

WAI

ST

NO

SE &

TA

IL W

IDTH

STA

NCE

SIGNALBOARD

NEW

YUSAKU CAMBERFREEDOM MACHINE TOP & BASEbases alternate black & white

NEW

YUSAKU FLATFREEDOM MACHINE TOP & BASE

NEW

JAKE O.E. CAMBERFREEDOM MACHINE TOP & BASE

NEW

JAKE O.E. FLATFREEDOM MACHINE TOP & BASEbases alternate black & white

TEAM SERIES JAKE O.E. FREEDOM MACHINE CAMBER, YUSAKU FREEDOM MACHINE CAMBER, JAKE O.E. FREEDOM MACHINE FLAT, YUSAKU FREEDOM MACHINE FLAT, OMNI LIGHT, YUSAKU OMNI LIGHT AND DAVE OMNI LIGHT

NEW

OMNI LIGHT TOP & BASE

The TEAM SERIES is designed for the next level in freestyle riding. All the boards in the TEAM SERIES are designed by our riders with the intermediate to advanced snowboarder in mind. They are built to be just as comfortable in the streets as they are on bigger features in the park.

NEW

NEW

YUSAKU OMNI LIGHT TOP & BASEbases alternate black & white

DAVE OMNI LIGHT TOP & BASEbases alternate black & white

Jake FM CAMBER & FLAT 148Jake FM CAMBER & FLAT 150Jake FM CAMBER & FLAT152

Yusaku FM CAMBER & FLAT 150Yusaku FM CAMBER & FLAT 152Yusaku FM CAMBER & FLAT 154

Omni Light 150Omni Light 152Omni Light 154Omni Light 156

Yusaku Omni Light150Dave Omni Light156

113.6 N/A 745.57 17.75 24.0 28.14 51-> 63113.93 N/A 759.62 18.04 24.5 28.67 51- >63115.45 N/A 769.7 18.28 24.9 29.05 51- >63

113.93 N/A 759.62 18.04 24.5 28.67 51- >63115.45 N/A 769.70 18.28 24.9 29.05 51- >63116.97 N/A 779.90 18.52 25.2 29.43 51- >63

113.93 76 759.62 18.04 24.5 28.67 51- >63115.45 77.5 769.70 18.04 24.9 29.05 52- >64 116.97 79 790.00 18.76 25.5 29.43 53- >65118.49 79 790.00 18.76 25.5 29.82 53- >65

113.93 76 759.62 18.04 24.5 28.67 51- >63118.49 79 790.00 18.76 25.5 29.82 53- >63

EFFE

CTIV

E ED

GE

SECO

ND

ARY

CO

NTA

CT

SID

ECU

T

TIP

& T

AIL

LEN

GTH

WAI

ST

NO

SE &

TA

IL W

IDTH

STA

NCE

SIGNALBOARD

JAKE O.E. FREEDOM MACHINE: New board to the line with its own core profile and board shapeYUSAKU FREEDOM MACHINE: New board to the line with its own core profile and board shape • matte silkscreen topsheet for the Jake • sublimated topsheet for Yusaku • knife-cut sintered Durasurf base • ABS sidewall • Durasurf tip and tail fill • Poplar Freedom Core —Newly designed “freedom” core is bolstered underneath each binding to provide more strength where you need it most giving you what you’re used to in a park core flex on the tip and tail with reinforced thickness under the bindings • triaxial glass on the bottom / triaxial glass on the top • Radial sidecut that meets in the center of the board • ETT inspiredOMNI LIGHT: New board to the lineDAVE OMNI LIGHT: New board to the lineYUSAKU OMNI LIGHT: New board to the line • Matte silskscreened topsheets on Omni Light and Dave Omni Light • sublimated topsheet for Yusaku • knife-cut sintered Durasurf base • ABS sidewall • Durasurf tip and tail fill • Park Profile Poplar core • biaxial glass on the bottom / triaxial glass on the top • Radial sidecut that meets in the center of the board • Centered stance • ETT inspired base • True Twin Park shape board with Wavelength Technology • Softer flex than the OMNI Wavelength

BACK COUNTRY SERIES EPIC, SPLIT EPIC, OMNI, ROCKER, VITA ROCKER, OG CAMBER AND OG FLAT

EPIC TOP, EPIC SPLIT TOP & BASE OMNI TOP & BASE ROCKER TOP & BASES VITA OMNI TOP & BASES

The BACK COUNTRY SERIES has all the boards for the advanced snowboarder who is ready to experience everything that the mountain has to offer. With bigger sizes, directional shapes, split-board options and plenty of wides, the BACK COUNTRY SERIES has you covered for extreme vertical faces or endless powder fields.

EPIC AND EPIC SPLIT •Hard Maple laminate top sheet • knife-cut and silkscreened sintered Durasurf base • ABS sidewall • Durasurf tip and tail fill • Standard profile Poplar core • biaxial glass on the bottom / triaxial glass on the top • Directional sidecut • Powder shape • 10 cm set back • ETT inspiredOMNI AND VITA OMNI • sublimated topheets • knife-cut sintered Durasurf base • ABS sidewall • Durasurf tip and tail fill • Standard profile Poplar core • biaxial glass on the bottom / triaxial glass on the top • Radial sidecut that meets in the center of the board • Directional shape, nose is longer than tail • 1 cm set back • Wavelength technologyROCKER • sublimated topsheets • knife-cut sintered Durasurf base • ABS sidewall • Durasurf tip and tail fill • Park Profile Poplar core • triaxial glass on the bottom / triaxial glass on the top • Radial sidecut that meets in the center of the board • True twin shape •10 degrees of lift on the nose and tailOG ( Flat or Camber ) • handpainted / spun matte silkscreen top • knife-cut sintered Durasurf base • ABS sidewall • triaxial glass on the bottom / triaxial glass on the top • Dual independent sidecut—two radial sidecuts that meet in the middle

EPIC, SPLIT EPIC, OMNI, ROCKER, VITA ROCKER, OG CAMBER AND OG FLAT

EFFE

CTIV

E ED

GE

SECO

ND

ARY

CO

NTA

CT

SID

ECU

T

TIP

& T

AIL

LEN

GTH

WAI

ST

NO

SE &

TA

IL W

IDTH

STA

NCE

SIGNALBOARDEpic 152Epic & Split 156Epic & Split 160Epic 166

Omni 153 Omni 156 Omni 156 wide Omni 159 Omni 159 wide Omni 162 Omni162wide

Rocker 152Rocker 154Rocker 156Rocker 158

Vita Omni 143 Vita Omni 147 Vita Omni 151 Vita Omni 153

Flat& Camber OG 151 Flat& Camber OG 153 Flat& Camber OG 155 Flat& Camber OG 155w Flat& Camber OG 157 Flat& Camber OG 159 Flat& Camber OG 159w Flat& Camber OG 163

109 77.5 818.00 28.3/14.5 24.8 29.4/27.5 52->64 111.5 79.00 808.00 29/14.8 25.5 30.1/28.3 52- >64114.3 81.00 790.00 29.9/15.4 25.7 30.4/28.5 52- >64118.6 84 780 31.3/15.8 27.1 32/30.1 52- >64

117 77.5 755 18.5/17.5 24.3 28.7 53 -> 65 120 79 770 18.9/17.9 24.8 29.3 54 -> 66 118 79 760/720 18.47 25.5 30.4 54 -> 66 122 81 785 19.2/18.2 25.3 29.9 55 -> 67 122 81 780/740 18.95 26.2 31.2 55 -> 67 124 82 800 19.6/18.6 25.8 30.4 56 -> 68 124 82 800/760 19.42 26.2 31.2 56 -> 68

115.00 79 760.00 18.00 24.3 28.6 53->65 117.00 79 770.00 18.2 24.6 29.00 53->65 118.00 79 770.00 18.47 24.6 29.00 53->65 119.00 79 780.00 18.7 24.9 29.30 54->66

109 72.5 720 17 23.0 27.1 50->62 112 75.5 750 17.5 23.7 27.8 51->63115 75.5 760 18 24.3 28.6 52->64117 77 770 18.2 24.6 29 52->64

115 N/A 780/740 18 24.3 28.6 52 -> 64 117 N/A 790/750 18.2 24.6 29 52 -> 64 118 N/A 790/750 18.47 24.6 29 52 -> 64 118 N/A 760/720 18.47 25.5 30.4 52 -> 64 119 N/A 800/760 18.7 24.9 29.3 52 -> 64 121 N/A 811/770 18.95 25.2 29.7 52 -> 64 121 N/A 780/740 18.95 26.2 31.2 52 -> 64 124 N/A 830/790 19.42 25.2 29.7 52 -> 64

OG CAMBER & OG FLAT TOP WITH ASSORTED BASEStops are assorted as well as bases

Camber: This measurement is taken when your board is on a flat surface. The space between the surface and the mid point of the bow of your board is the camber. The taller the camber, the harder it presses on your sidecut. The camber also assists you in springing off of one edge and moving to the other. Your board’s camber should be proportionate to its sidecut and your weight.

Rocker : Rocker is the lifting of the contact points off the snow creating easier edge to

edge turns and float in powder. We have all seen Rocker make a strong comeback over the last few years. Originally this technology came from the 80’s to

keep your board floating in powder. But now with all the advancements in riding and board building technology Rocker has taken on a whole new purpose. Signal’s Rockers

are flat through the bindings and then roll up into a 5 degree or 10 degree rise. The versatility and ease make it a choice that is great for beginners as well as the pros.

Lightweight: Signal cores are lightweight. They are milled in our own factory with Poplar wood. Built by alternating the grain structure and combined with high quality resin, these cores are strong and retain their pop.

Flat: Choosing Flat Technology—or no camber—is an excellent choice for park riding. The lack of camber in your board allows you to engage the entire edge. Flat boards also give the rider better leverage for many tricks because you’re never working against the board.

Hand painted: This is unique to the Signal factory. This sticker on a board means that we handpainted part of this board. Whether it’s staining the laminate topsheet or using a brush on the OGs, each board with this sticker has been artistically personalized so that it is one of a kind.

Made In California: Every board that Signal builds is hand made in our southern California factory. We’re very proud of this. Your support increases our strength in promoting US manufacturing, US jobs and quality craftsmanship.

Wavelength Technology:

Signal’s OMNI Wavelength made it’s debut in 2008. This hybrid came from the simple concept of taking our favorite camber board and adding slight rocker to the tip and tail. For those who love camber and are interested in

Rocker, but are not willing to give up camber entirely, Wavelength is the choice! The OMNI Wavelength has camber through the middle of the board

with light 5 degree Rocker through the tip and tail.

ETT: When you see this sticker, it indicates that the board it’s on has been inspired by our monthly web show, Every Third Thursday. We come up with some pretty creative ideas for this show and —while we haven’t been able to mount a paintball gun in every board—we ‘ve incorporated some of the other technologies and graphics into our line.

Special Team Colorways: When you see this sticker on a Signal board, that means that it is a special colorway from the the rest of the series. These are Signal’s versions of team boards. Each team colorway board comes in the size that that particular team member rides on the hill. The geometry is the same as the corresponding size in the series, just the graphic is theirs. If you ride the same size as the team rider, then you get your pick of graphics!

SIGNAL BOARD INFO STICKERS

Every board that Signal builds is hand made in our southern California factory. We’re very proud of this. Your support increases our strength in promoting US manufacturing, US jobs and quality craftsmanship.

Our production is year-round, so our factory is in constant research and development and our mission is to bring you the best in snowboarding and customer service. With our web show, Every Third Thursday, and our custom board builder, Mixed Signals, our customers are offered the unique experience of being part of our factory without ever having worked here. It’s the connection from factory to rider.

To the right are some definitions and descriptions that help the customer appreciate what goes into building our boards. You’ll find a lot of these terms as tech stickers on our boards on the shop floor. They provide quick reference points for you to compare and contrast the technology differences between all Signal boards.

In addition to all of these stickers, we also have QR code stickers that link to tech videos for each board. These are like mini-clinics right on the shop floor—and helpful to both employees as well as customers.

THANK YOU!

TAKE SOME NOTES

FIND US HEREsignalsnowboards.com

facebook.com/signalsnowyoutube.com/signalsnowboardtwitter.com/signalsnowboard

instagram.com/signalsnowboard

OR JUST CALL US714.899.4055