1.3.1 Input, output and storage devices

of 16

Computer Science 9608 (Notes) Chapter: 1.3 Hardware

Topic: 1.3.1 Input, output and storage devices Computer System:

A computer is an electronic machine that accepts data, stores and processes data into information. The computer is able to work because there are instructions in its memory directing it, instructions that direct the computer are called software or computer program. The physical parts of the computer that you can see and touch, such as the keyboard, monitor and the mouse are called hardware. There are four major categories of computer hardware:

1. Input devices: used to enter data into the computer 2. Processing devices: manipulate the data. 3. Storage devices: store data and program. 4. Output device: show results of the process.

UInput devicesU:

An input device is any hardware component that allows you the user to enter data or instruction into the computer. There are many manual/automatic input devices. Most widely used input devices are:

Keyboard Pointing devices

o Trackerball mouse o Laser mouse

2D/3D Scanners

of 16


Topic: 1.3.1 Input, output and storage devices Keyboard:

The keyboard is one of the most popular ways of inputting information into a computer. The basic mechanical keyboard relies on springed keys being pressed down to complete an electrical circuit. This circuit then transmits a binary signal (commonly using ASCII) to the computer to represent the key pressed.

Scanner

A scanner creates a digital photograph of a paper document. It scans the illuminated surface of the document with a single row of hundreds of light sensors. Each sensor produces an analogue signal that depends on the intensity of the light it receives. The scanner’s embedded computer repeatedly scans the signals from the sensors as they move across the document. The embedded computer then digitizes, processes them and sends them to the computer.

http://en.wikipedia.org/wiki/ASCII

http://commons.wikimedia.org/wiki/File:Chiclet_keyboard_medium.png

http://commons.wikimedia.org/wiki/File:CPT_Hardware-Input-scanner-flatbed.svg

http://commons.wikimedia.org/wiki/File:Scaner.jpg

of 16


Topic: 1.3.1 Input, output and storage devices Trackerball Mouse:

A trackball is a pointing device consisting of a ball held by a socket containing sensors to detect a rotation of the ball about two axes—like an upside-down mouse with an exposed protruding ball. The user rolls the ball with the thumb, fingers, or the palm of the hand to move a pointer. Compared with a mouse, a trackball has no limits on effective travel; at times, a mouse can reach an edge of its working area while the operator still wishes to move the screen pointer farther. With a trackball, the operator just continues rolling, whereas a mouse would have to be lifted and re-positioned. Some trackballs, such as Logitech's optical-pickoff types, have notably low friction, as well as being dense (glass), so they can be spun to make them coast. The trackball's buttons may be situated to that of a mouse or to a unique style that suits the user.

Optical (Laser) Mouse:

A mouse allows the user to point by moving the cursor in graphical user interface on a PC’s screen. The optical mouse actually uses a tiny camera to take 1,500 pictures every second. Able to work on almost any surface, the mouse has a small, red light-emitting diode (LED) that bounces light off that surface onto a complementary metal-oxide semiconductor (CMOS) sensor.

The CMOS sensor sends each image to a digital signal processor (DSP) for analysis. The DSP, operating at 18 MIPS (million instructions per second), is able to detect patterns in the images and see how those patterns have moved since the previous image. Based on the change in patterns over a sequence of images, the DSP determines how far the mouse has moved and sends the corresponding coordinates to the computer. The computer moves the cursor on the screen based on the coordinates received from the mouse. This happens hundreds of times each second, making the cursor appear to move very smoothly.

Sensor:

A sensor measures a specific property data and sends a signal to the computer. They can produce a stream of input data automatically without any human intervention. Usually this is an analogue signal so it needs to be converted into digital data for the computer to process. This is done using by an Analogue-to-Digital Converter (ADC). Sensors are used extensively in monitoring / measuring / data logging systems, and also in computer control systems. Following is the list of commonly used sensors:

Temperature Magnetic Field Gas Pressure Moisture Humidity Ph/Acidity/Alkalinity Motion/ Infra-Red

http://electronics.howstuffworks.com/led.htm

http://electronics.howstuffworks.com/cameras-photography/digital/question362.htm

http://computer.howstuffworks.com/pc.htm

http://www.igcseict.info/theory/5/anadig/index.html

http://www.igcseict.info/theory/5/anadig/index.html

http://www.igcseict.info/theory/7_1/measure/index.html

http://www.igcseict.info/theory/7_1/control/index.html

http://www.igcseict.info/theory/7_1/control/index.html

of 16


Topic: 1.3.1 Input, output and storage devices Advantages of using sensors to collect data are:

1. They can collect data far more frequently than a person. 2. They are more reliable than a person, who may forget to take readings. 3. They are more accurate than a person who may misread the signal. 4. They can collect data from places where it is not possible for a person to go such as inside a

chemical or nuclear reaction vessel. The disadvantage of using sensors is that they may need a power supply to work and may need regular calibration to check their accuracy.

Temperature Sensor:

A temperature sensor produces a signal that depends on the temperature of its surroundings. The computer process the digitize signal to display a measurement or to control an appliance.

We can use temperature sensor in many appliance such: Automatic washing machine Digital thermometer Controlling heating system in buildings, including greenhouses and chemical reaction vessels.

Pressure sensor:

A pressure sensor produces a signal that depends on the pressure to which it is exposed. Pressure sensor can be used in many appliances such as automatic blood pressure monitor. Pressure sensor can also control the pressure of gases or liquids in chemical reaction vessel.

Magnetic Field:

The Magnetic Field Sensor can be used to study the field around permanent magnets, coils, and electrical devices. This sensor uses a Hall effect transducer, and measures a vector component of the magnetic field near the sensor tip. It has two ranges, allowing for measurement of relatively strong magnetic fields around permanent magnets and electromagnets, as well as measurement of weak fields such as the Earth’s magnetic field. The articulated sensor tip allows you to measure both transverse and longitudinal magnetic fields.

Gas:

A gas sensor produces a signal depending on the concentration of a particular gas or vapor. We can use gas sensor for an inflammable gas to monitor the atmosphere and sound an alarm if there is a leakage. We can use gas sensor in other applications such as:

Breathalyser, which measure the concentration of alcohol vapour in a sample of breath and estimate the concentration of alcohol in blood.

Process control in chemical industry. Environment monitoring of air pollution.

of 16


Topic: 1.3.1 Input, output and storage devices Moisture/ Humidity sensor

A moisture sensor produces a signal that depends on the concentration of water vapors in the atmosphere. A moisture sensor can control an irrigation system more efficiently only allow water when soil is dry. We can use moisture sensor in many other application including:

Controlling a heating system and air conditioning system. Maintaining sufficient humidity in the air in a greenhouse. Measuring humidity for meteorological record and forecasting in a weather station.

PH/acidity/alkalinity sensor:

PH Sensor measures the pH of aqueous solutions in industrial and municipal process applications. It is designed to perform in the harshest of environments, including applications that poison conventional pH sensors.

Typical activities using our pH sensor include:

Acid-base titrations Studies of household acids and bases Monitoring pH change during chemical reactions or in an aquarium as a result of photosynthesis Investigations of acid rain and buffering Analysis of water quality in streams and lakes

Infrared sensor:

An infra (IR) sensor produces a signal that depends on the level of invisible IR radiation falling on it.

All objects (unless they are extremely cold) emit significant IR radiation. Security camera equips with lens and grid of IR sensors uses this IR radiation to form a detector for a person.

of 16


Topic: 1.3.1 Input, output and storage devices Output devices

An output device is a piece of hardware that is used to display or output data which has been processed or has been stored on the computer.

There are many different kind of output devices such as inkjet, laser and 3D printers; 2D and 3D cutters; speakers and head phones; actuators; flat panel display screens including Liquid Crystal Display (LCD) and Light-Emitting Diodes (LED); LCD projectors and Digital Light Projectors (DLP)

Printer: Printer is an output device that prints character and graphics on paper or other materials. Laser Printer: Laser printer uses a laser scanning a drum to print with powdered ink, known as toner. The printer places an even, negative, static charge on a photoconductive drum. It scans a very narrow laser beam across the surface of the rotating drum. The laser beam causes the negative charge to leak away wherever it shines on the drum. The drum revolves past a supply of toner which is also charged negatively. The toner is attracted onto those regions of the drums surface where no charge remains. Toner particles are repelled by those regions that remain charged because they were not lit by the laser’s beam. The printer rapidly switches the beam on and off to draw the required pattern of output. A roller presses a sheet of paper against the rotating drum and the toner particles transfer to the paper.

Another roller presses the paper against a heated ‘fuser’ roller. The heated toner melts and bonds to the paper, producing a printed copy. If there are four drums with four different colors of toner the printer can print in color.

of 16


Topic: 1.3.1 Input, output and storage devices

of 16


Topic: 1.3.1 Input, output and storage devices Inkjet printer An inkjet printer uses a print head to propel differently sized droplets of ink, measuring just picolitres, from a number of fine nozzles onto a sheet of paper. The printhead scans from side to side on stabilizer bar and rollers feed the paper forward.

of 16


Topic: 1.3.1 Input, output and storage devices Speakers: Speakers are one of the most common output devices used with computer systems. The purpose of speakers is to produce audio output that can be heard by the listener. Speakers are transducers that convert electromagnetic waves into sound waves. peakers use magnets to convert electricity into sound waves. This is a basic principle of physics.

Sound is made when an object makes the particles around it vibrate. These vibrations travel through the air, and reach your ears. Our brain interprets this motion as sound. High frequencies of sound are made when the wavelength of the vibrations are close together. Low frequencies occur when they are farther apart. The amplitude of the vibrations causes the level of volume you hear.

To make these vibrations, speakers have a set of magnets. One of them is called the permanent magnet. It doesn’t move or change polarity and is made of a magnetic metal like iron. The other magnet is an electromagnet. It is a coil of metal wire like copper or aluminum. When an electric current is sent through the electromagnet, it is either attracted to or repelled away from the permanent magnet. The polarity of the coil can be reversed depending on the current. This back and forth movement causes the diaphragm or cone to vibrate, because it is connected to the magnetic coil. This is the sound that you hear.

http://www.techterms.com/definition/outputdevice

http://www.techterms.com/definition/output

http://explorephysics.edublogs.org/2010/09/15/speakers-and-physics/%E2%80%9D

http://explorephysics.edublogs.org/files/2010/09/Speaker-Diagram-1.png

of 16


Topic: 1.3.1 Input, output and storage devices Actuators: An actuator is an output device but it does not always provide output directly to the user. It can change some physical value in response to a signal from an automated system or control system. Actuators naturally pair up with sensors, which can provide feedback to the control program about the effects of its actuators. Backing storage:

Backing storage (also called auxiliary storage) stores programs and data for future use. In order to store data while the electricity is switched off or unavailable storage must be non-volatile. Access to backing storage is slower than internal memory. Operating systems and program files are loaded into RAM form backing storage when required for execution.

It is important to distinguish between a storage device and storage medium. The storage device is the machine that stores data; the storage medium is the material on which the device stores data. There are three different types of backing storage device:

1. Magnetic storage device 2. Optical storage device 3. Solid state storage device.

Magnetic Storage device:

Magnetic media 0T 0Tstores data by assigning a magnetic charge to metal. This metal is then processed by a read head, which converts the charges into ones and zeros. Historically, magnetic media has been very popular for storing programs, data, and making backups. It looks set to continue in this role for some time. However, solid state technology is starting to be used more and more, storing programs and data on new devices such as mobile phones and cameras.

Hard disk

Hard disks are usually found inside computers to store programs and data. They are increasingly cheap and more and more companies are using them to back things up. Hard disks can vary in physical size with

of 16


Topic: 1.3.1 Input, output and storage devices some disks getting as small as your thumb. The capacity of a commercial disk is currently up to about 4 terabytes allowing users to read and write to them. They are constructed from several key components:

Platter0T 0T- Metallic disks where One or both sides of the platter are magnetized, allowing data to be stored. The platter spins thousands of times a second around the spindle. There may be several platters, with data stored across them

Head0T 0T- The head reads magnetic data from the platter. For a drive with several platters there may two heads per platter allowing data to be read from top and bottom of each

Actuator Arm0T 0T- used to move the read heads in and out of the disk, so that data can be read and written to particular locations and you can access data in a Random fashion, you don't need to read your way through the entire disk to fetch a particular bit of information, you can jump right there. Seek time is very low.

Power connector0T 0T- provides electricity to spin the platters, move the read head and run the electronics

IDE connector0T 0T- allows for data transfer from and to the platters Jumper block0T 0T- used to get the disk working in specific ways such as 0T 0T31TURAID U31T

For the exam you must be able to explain how a hard disk works:

1. The platters spin around the spindle 2. data is requested to be read from a particular area of a platter 3. the actuator arm moves the read head to that track 4. Once the data sector that is required has spun around and under the read head, data is read 5. Read data is sent from the IDE connector to main memory

http://en.wikipedia.org/wiki/RAID

http://commons.wikimedia.org/wiki/File:Hard_drive-en.svg

of 16



Writing data is very similar:

1. The platters spin around the spindle 2. data is sent to the hard disk using the IDE connector 3. the actuator arm moves the write head to the track that will be written to 4. Once the data sector that is required has spun around and under the write-head, data is written to

the platter

Optical disks

Optical media works by creating a disc with a pitted metallic surface. There are several different types of disk out there ranging from 650 MB to 128 GB, with the pits and lands getting closer together for higher volume disks. The principle behind how each of them works is the same.

http://commons.wikimedia.org/wiki/File:Cylinder_Head_Sector.svg

http://commons.wikimedia.org/wiki/File:Afm_cd-rom.jpg

of 16



Optical media

Device Type Size Image

31TUCD-ROMU31T

CD-R

CD-RW

Read Only

Write once then Read only

re-Writable

650 - 900 MB

DVD-ROM

DVD-R

DVD-RW

DVD-RAM

Read Only

Write once then Read only

re-Writable

re-Writable

4.7 - 9.4 GB

Blu-ray (BD) disc

HD DVD (obsolete)

Re-Writable and Read Only versions available. Uses a blue laser, that is able to recognise smaller pits and lands, which allows for the pits and lands to be more closely packed, and so store more data

25 - 128 GB

CD-ROM

A CD-ROM is a metal disc embedded into a plastic protective housing. Each disc has to be 'mastered'; this is the process of creating the CD and placing the data on it. CDs are WORM (Write Once, Read Many) media; this refers to the fact that once they have been mastered, there is no way to change the data on them.

http://en.wikipedia.org/wiki/CD-ROM

http://commons.wikimedia.org/wiki/File:CD_logo.png

http://commons.wikimedia.org/wiki/File:DVD_logo.svg

http://commons.wikimedia.org/wiki/File:Blu-ray_200GB.png

http://commons.wikimedia.org/wiki/File:CPT_Hardware-Secondary-OpticalDrive.svg

of 16


Topic: 1.3.1 Input, output and storage devices Writing to a CD-ROM

1. A single track runs in a spiral pattern from the center of the disc to the outside, this track is made of pits and lands to represent the ones and zeroes of binary data

2. A high-powered laser is shone onto the CD-ROM, burning pits into the metal 3. The disc spins and the laser follows the track, putting the binary data onto the CD in a spiral track 4. The data has been written

Reading from a CD-ROM

1. A single track runs in a spiral pattern from the center of the disc to the outside, this track is made of pits and lands to represent the ones and zeroes of binary data

2. A low-powered laser is shone on the metallic surface and the reflection is captured in a photodiode sensor, the lands reflect differently to the pits, meaning it can tell the difference between a 1 and a 0

3. The disc spins and the laser follows the track 4. The binary data (the 1s and 0s) are put together and the CD-ROM has been read

0TSolid State Storage Media:

Solid-state memory

Device Description

USB flash drive Up to 256 GB

Memory card Up to 256 GB

of 16


Topic: 1.3.1 Input, output and storage devices USB (memory stick) Flash Drive

Internals of a typical USB flash drive

0TSolid state storage devices are electronic and made as integrated circuits or chip. The currently predominant technology is flash memory, which like ROM holds data that are non-volatile but can be erased and rewritten in large blocks. We often refer to this as non-volatile memory.

1. 0TPut the drive into USB socket. 2. 0TUSB driver loads, providing the computer with code on how to read and write from the USB. 3. 0TThe USB is read, giving information on the file and folder structure (File Allocation Table) to the

Computer. 4. 0T[Reading] The user chooses to open a file, the Computer sends the address wanted to the USB

port. 5. 0T[Reading] The USB returns the data at the location requested. 6. 0T[Writing] The computer sends data to the USB port where it is place into empty space on the drive. 7. 0T[Writing] The computer then requests a new version of the file and folder structure.

http://commons.wikimedia.org/wiki/File:Usbkey_internals.jpg

of 16


Topic: 1.3.1 Input, output and storage devices Memory cards

0TWork in much the same way as a Flash drive and can often be converted into Flash Drives. They have different connectors and are generally smaller than USB Flash drives allowing for them to be used in cameras, mobile phones and game consoles.

http://commons.wikimedia.org/wiki/File:Flash_memory_cards_size.jpg

1.3.1 Input, output and storage devices

Documents

Transcript of 1.3.1 Input, output and storage devices