123-T 123-U - Sandvik Coromant - manufacturing … 123-U 17 12 18 Form No. C -1050:110-ENG Family...
Transcript of 123-T 123-U - Sandvik Coromant - manufacturing … 123-U 17 12 18 Form No. C -1050:110-ENG Family...
1 2 3 4 5
6 7 8 9
16
123-T 123-U
17
12
18
Form
No.
C -
1050
:110
-EN
G
Fam
ily c
ode
= I2
36
Co
roP
ak 0
6.1
05.
10.0
6 R
evis
ed 0
9.03
.06
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions– Quick quotation
– Easy to order – Competitive delivery
CoroCut® 3 inserts — Seat size T, U
Shape options
Shape options
OptionsSeat size No of edgesInsert grades
T, U 3 or 1GC4125, GC1125, GC1020, H10F
ER-treatment
Insert widthTolerance on la
S=Small, M=Medium, 0=Zero or R=Recommendedla — 0,5–3,2 mm± 0,02 mm — ± 0,1 mm,
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.
Shape options
Right hand seat size (T)
Left hand seat size (U)
Options shown as functional position in holder.
Right hand shown
N123 - - -
GC4125, GC1125, GC1020, H10F
Ð
la= la2= la3=
r= re1= re2= re3= re4=
ar= ar1= ar2= bs1= bs2=
yr= yr1= yr2= kr1=kr2=kr3=kr4=ach1=ach2=
r, re, re1, re2, re3, re4
ar, ar1, ar2, bs1, bs2,
yr, yr1, yr2, kr1, kr2, kr3, kr4, ach1, ach2,
ar=re= a1= a2=
Insert Radius
Length Length
Angle Angle
Radius
Tolerance on la Tolerance on la — ± 0,02 mm — ± 0,1 mm
Profile option 18 For threading
Option No Option 1-18
Seat size T and U
No of edges 3 or 1
Insert grade
Insert width la, (la1, la2 Only for option 5, 6, 7)
Insert width = 0,5-3,2 mm for insert seat size T and U
ER treatment S=Small, M=Medium, 0=Zero or R=Recommended
Your value/ Your choice
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity (min 10 pcs)
Telephone
Telefax
Customer attention
Issuer
CoroCut3® inserts— Seat size T, U
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
State only your options deviating from the above standard
Metric std
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Form
No.
C -
1050
:110
-EN
G
Fam
ily c
ode
= I2
36
Co
roP
ak 0
6.1
05.
10.0
6 R
evis
ed 0
9.03
.06
123-FB
1 2 3 4 5
6 7 8 9 10
1211 16
123-GE123-GF123-RO
17
123-FB - E F G H J K L 123-RO - E F - H J K L 123-GF D E F G H J K L 123-GE - - - G H J K L
123-FB - 1,9-2,3 2,3-3,4 2,6-3,8 3,5-4,8 4,5-5,8 5,5-6,8 6,5-8,0 123-RO - 1,9-2,4 2,8-3,2 - 3,8-4,0 5,5-6,35 6,4-7,4 7,4-8,0 - - - - 4,5-5,0 - - - 123-GF 1,5-1,9 1,9-2,3 2,3-2,8 2,8-3,6 3,6-5,0 5,0-5,6 5,6-7,2 7,2-8,0 123-GE - - - 3,0-3,4 4,0-5,0 4,5-6,35 5,6-6,35 6,5-8,0
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
CoroCut® inserts— Geometries FB, RO, GF, GE
Shape options
Shape options
Shape options
Blank for shape
option 8.
2 Edge 1 Edge2 Edge2 Edge
Form
No.
C -
1050
:106
-EN
G
Fam
ily c
ode
= I2
35
Co
roP
ak 0
0.2
00.
09.2
9 R
evis
ed 0
9.08
.11
OptionsInsert seat sizeNo of edgesInsert grade
Geometry = FB, RO, GF, GE and insert seat size = D, E, F, G, H, J, K, L2 ( 1 for GE )FB = GC1125, GC1145, H10F, H13A RO = GC1125, GC2135, GC1005, GC1105, H10F, H13A, S05F GF = GC1125, GC1145, GC2135, GC1105, GC1005, H13A, S05F, H10F GE = CB20, CB50, CB7015
ER
A1, A2, A3R1, R2, R3, R4D1, D2, D3, D4V1, V2, V3, V4S3, S4, S5Tolerance
ER-treatment—S=small, L=Large or R=RecommendedInsert width—1,5–8,0 mmInsert radius R1/R2/R3/R4length—D1/D2/D3/D4angle—V1/V2/V3/V4Clearance angle—S3/S4/S5A1—Tolerance — ± 0,02 mm
Insert seat size
Insert width
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.
FB - E F G H J K L RO - E F - H J K L GF D E F G H J K L GE - - - G H J K L
N123 - - -
FB = GC1125, GC1145, H10F, H13A RO = GC1125, GC2135, GC1005, GC1105, H10F, H13A, S05F GF = GC1125, GC1145, GC2135, GC1005, GC1105, H13A, S05F, H10F GE = CB20, CB50, CB7015
D E F G H J K L A1 1,9-2,3 2,3-3,4 2,6-3,8 3,5-4,8 4,5-5,8 5,5-6,8 6,5-8,0 1,9-2,4 2,8-3,2 - 3,8-4,0 5,5-6,35 6,4-7,4 7,4-8,0 4,5-5,01,5-1,9 1,9-2,3 2,3-2,8 2,8-3,6 3,6-5,0 5,0-5,6 5,6-7,2 7,2-8,0- - - 3,0-3,4 4,0-5,0 4,5-6,35 5,6-6,35 6,5-8,0
A1= A2= A3=
R1= R2= R3= R4=
D1= D2= D3= D4=
V1= V2= V3= V4=
R1, R2, R3R4
D1, D2, D3, D4
V1, V2, V3, V4
S3= S4= S5=
S3, S4, S5
Ð
FBRO
GFGE
Option No FB = Option 1-17, RO = Option 8, GF = Option 1-8, 12 GE = Option 1
Insert seat size Geometry Insert seat size
No of edges 2 (1 for GE )
Insert grade
Insert Width A1( A2, A3 Only for option 5, 6, 7)
Geometry Insert seat size
Insert Radius R1, R2, R3, R4
Length D1, D2, D3, D4
Length
Depending on insert size
Angle V1, V2, V3, V4
Radius
ER treatment S=small, L=large or R=Recommended
Tolerance on A1 Tolerance on A1 — 0,02 mm
Clearance angle S3, S4, S5
Clearance angle
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Form
No.
C -
1050
:106
-EN
G
Fam
ily c
ode
= I2
35
Co
roP
ak 0
0.2
00.
09.2
9 R
evis
ed 0
9.08
.11
Your value/ Your choice
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity (min 20 pcs)
Telephone
Telefax
Customer attention
Issuer
CoroCut® inserts— Geometries FB, RO, GF, GE
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
State only your options deviating from the above standard
Metric std
151.2-3G
1
9 1110
2 3
76
54
8
12 16 17
1
151.2-6G
151.2-4G
1* 2 3
765*
4*
8*
Form
No.
C -
1050
:100
-EN
G
Fam
ily c
ode
= I2
35
Co
roP
ak 9
4.1
94.0
1.01
R
evis
ed 0
9.08
.11
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
T-Max Q-Cut inserts— Geometries 3G, 4G and 6G
Alternative when shapes required lie outside Tailor Made range of -4G.
Shape options
Shape options
Shape options For applications requiring optimal chip control in
width range 6–10 mm.
Shape option
OptionsInsert seat 20, 25, 30, 40, 50, 60, 80 size Insert 3G— GC1125, GC235, H13A, H10F grade 4G— GC1125, GC235, CT525, H10A, H13A, H10F 6G— GC1145, GC235ER ER-treatment—S=small, L=Large or R=Recommended
A1, A2, A3 Insert width—1,9–11,0 mmR1, R2, R3, R4 Insert radius R1/R2/R3/R4 Insert radius R1/R2—6G;=0,2–2,0 mmD1, D2, D3, D4 length—D1/D2/D3/D4V1, V2, V3, V4 angle—V1/V2/V3/V4Negative land T-Max Q-Cutter—10ºTolerance A1—Tolerance —( ± 0,02 mm — ± 0,1 mm )
Recommended first choice geometry for grooving. *Options 1, 4, 5 and 8 also suitable for T-Max Q-cutter. The face of options 4 and 5 must be symmetrical for T-Max Q-cutter. Shape options
Shape options
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.
3G 20 25 30 40 50 60 80 4G 20* 25* 30* 40* 50* 60* 80 6G - - - - - 60 80
N151.2 - - - G
3G GC1125, GC235, H13A, H10F4G GC1125, GC235*, CT525, H10A, H13A*, H10F6G GC1145, GC235
20 25 30 40 50 60 80 A1
3G 1,9-2,4 2,3- 3,3 2,9-4,3 3,9-5,3 4,9-6,4 5,9-8,4 7,9-10,4 4G 1,9-2,3 2,26-3,3 3,0-4,3 4,0-5,3 5,0-6,4 6,0-8,4 7,5-11,0 6G - - - - - 5,8-7,9 7,9- 9,8 A1=
A2= A3=
R1=R2= R3= R4=
D1=D2= D3= D4=
V1=V2= V3= V4=
3G R1, R2, R3, R4 4G R1, R2, R3, R4 6G R1/R2=0,2-2,0
3G D1, D2, D3, D4
3G V1, V2, V3, V4 4G V1, V2
Ð
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Co
roP
ak 9
4.1R
evis
ed
Your value/ Your choice
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity (min 20 pcs)
Telephone
Telefax
Customer attention
Issuer
T-Max Q-Cut inserts— Geometries 3G, 4G and 6G
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
State only your options deviating from the above standard
Option No Option 1-17
Insert seat size Geometry Insert seat size
Metric stdFor Geometry 3G use std geometry 4G
Insert grade Geometry * Also for T-Max Q-CutterInsert grade
Insert Width A1, A2, A3
Geometry Insert seat size
* Also for T-Max Q-Cutter
Insert Radius R1, R2, R3, R4
Length D1, D2, D3, D4
A2 available for geometries 3G/4G and options 5, 6, 7 A3 available for geometries 3G/4G and option 5
Angle V1, V2, V3, V4
Geometry Radius
Length
Negative land For T-Max Q-cutter =10º
ER treatment S=small, L=large or R=Recommended
Tolerance on A1 Tolerance on A1 —( ± 0,02 mm — ± 0,1 mm )
Depending on insert size
Geometry
Geometry Angle
R
L
F = 0° G = 90°
123123123
CF, CM, CRTF, TMGM
D, E, F, G, H, J, KG, H, J, K, LD, E, F, G, H, J, K
151.2151.2151.3
4E, 5E, 5F, 4U4T, 5T, 4U7G
20, 25, 30, 40, 50, 60, 8030, 40, 50, 60, 8025, 30, 40, 50
123 FB, RO, GF E, G, H, J, K, L 151.2 3G, 4G 20, 25, 30, 40, 50, 60, 80
C3, C4, C5, C6h = 12, 16, 20, 25, 32, 40 b = 12, 16, 20, 25, 32, 401,5–8,0 mm
Coromant Capto®
Form
No.
C-1
050:
107-
EN
G
Fam
ily c
ode
=T5
11
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
CoroCut and T-MAX Q-Cut for parting and turning
Coupling sizeSquare shank size
Insert widthInsert systemClamping systemHolder styleTool design (tool in hand)ReinforcementMachining limitations ar , see page 2Dm
Machining limitations f1 , see page 2Machining limitations l1 , see page 2
Parting
Shank holders Tool design Holder style
Machining limitations
Clamping systemScrew
Spring
TurningReinforceed blade parting
Operation type
PartingTurningGrooving
Type Geometries Insert sizes Type Geometries
Valid for all operation types
Insert sizes
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.Options
CoroCut 123 or T-MAX Q-Cut 151.2, 151.3Screw (CoroCut) Screw/spring (T-MAX Q-Cut)Approach angle—F = 0º or G = 90ºRight hand/Left hand —R/LY = Yes ( only for 0º) or N = NoCutting depth ar —5,1–36 mmDiameter of workpiece Dm— 30,5 mm—Dimension f1—13,0–67,5 mmProgramming length l1—33,3–250 mm
Standard inserts
f1min - max
D - G D - H D - J D - L D - L D - L D - L
1212 1616 2020 2525 3225 3232 4040
l1min - max
f1min - max
D - H D - J D - L D - L D - L D - L
1616 2020 2525 3225 3232 4040
l1min - max
f1min - max
D - H D - K D - L D - L
C3 C4 C5 C6
l1min - max
f1min - max
D - H D - K D - L D - L
C3 C4 C5 C6
l1min - max
13 - 21,2 17 - 25,2 21 - 29,2 26 - 34,2 26 - 34,2 33 - 41,2 41 - 49,2
75,6 - 150 75,6 - 150 80,0 - 150 93,9 - 154 113,8 - 170 113,8 - 170 136,6 - 250
23 - 32 27 - 40 32 - 50 32 - 50 39 - 64 47 - 67,5
72,3 - 150 80,0 - 150 90,5 - 154 110,5 - 170 110,5 - 170 133,3 - 250
17 - 40 21 - 43 26 - 46 32,5 - 51
36,2 - 70 41,2 - 85 40,6 - 90 41,6 - 95
24 - 44 28 - 49 33 - 54 39 - 65
33,3 - 68 38,1 - 68 37,2 - 68 38,2 - 68
Max arD = 1,5 - 15 20 25 25 25 25 E = 2,0 2,0 15 20 25 25 25 25 F = 2,5 2,5 15 20 25 25 25 25 G = 3,0 3,0 15 20 25 25 25 25 H = 4,0 4,0 15 20 25 32 36 36 J = 5,0 5,0 — 15 25 32 36 36 K = 6,0 6,0 — — 20 32 36 36
D - H D - J D - L D - L D - L D - L
16 × 16 20 × 20 25 × 25 25 × 32 32 × 32 40 × 40
f1 min
- - 32 - - 40 - - 50 - - 52,5 - - 59,5 - - 67,5
ar max
14,5 18,5 23,5 26 26 26
D - H D - K D - L D - L
(C3) 322 = 16 (C4) 402 = 20 (C5) 502 = 25 (C6) 602 = 30
f1 min
32 40 50 52,5
ar max
15 18,5 23,5 21
X1 Q2/Q3 12 16 20 25 32 40
General data
Insert seat size
shank size
0 degree shank toolsInsert seat size
shank size
90 degree shank tools
Insert seat size
Capto size
0 degree Coromant Capto tools
Insert seat size
Capto size
90 degree Coromant Capto tools
Data only for parting
Seat size mm
Max seat size
Insert seat size
shank size b × h
90 degree shank tools
Insert seat size
Capto size D5m /2
90 degree Coromant Capto tools
Form
No.
C-1
050:
107-
EN
G
Fam
ily c
ode
=T5
11
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
Max ar for each coupling when 0 degree tools
Size h
C 151. - --
CoroCut 123 T-MAX Q-Cut 151.2/151.3
C 123 --
Ð
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
State only your options deviating from the above standard
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroCut and T-MAX Q-Cut for parting and turning
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
Coupling type Coupling type Coromant Capto or Shank
Coupling size Coromant Capto size C3, C4, C5, and C6Shank size h= 12 16 20 25 32 40
b= 12 12/16 16/20 20/25 25/32 32/40
Insert/ geometry type
Insert seat size Type 123-, Insert seat size = D, E, F, G, H, J, K, LType151.2/151.3-, Insert seat size = 20, 25, 30, 40, 50, 60, 80
Insert width Insert width 1,5-8,0
Insert system
Clamping system Screw (CoroCut) Screw/spring (T-MAX Q-Cut)
Tool design (tool in hand)
Right hand=R Left hand=L
Reinforcement Y= Yes (only for 0º) or N= No
Cutting depth ar, Machining limitations see page 2
Cutting depth = 5,1-36 mm
Diameter on workpiece Dm
Diameter on workpiece = 30,5 mm —
Dimension f1, Machining limitations see page 2
Dimension = 13,0-49,2 mm
Programming length l1, Machining limitations see page 2
Length = 74,3-250 mm
Holder style F = 0º or G = 90º
Metric stdYour value/ Your choice
Type 123- (X1)=CF, CM, CR, TF, TM, GM, FB, RO, GF Type151.2- (Q2)=4E, 5E, 5F, 4T, 5T, 3G, 4G, 4U /151.3- (Q3)=7G
Form
No.
C-1
050:
107-
EN
G
Fam
ily c
ode
=T5
11
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
R
N
L
123 RM E, F, G, H, J, L 151.2 4P, 5P, 4U, 4G 30, 40, 50, 60, 80
123 FB, RO, GF E, G, H, J, K, L 151.2 3G 30, 40, 50, 60, 80
C3, C4, C5, C6h = 12, 16, 20, 25, 32, 40 b = 12, 16, 20, 25, 32, 403,0–8,0 mm
Coromant Capto®
Form
No.
C-1
050:
108-
EN
G
Fam
ily c
ode
=T5
12
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
CoroCut and T-MAX Q-Cut for profiling
Shank holders Tool design
Machining limitations
Clamping system
Screw
ProfilingCopy angle
Operation type
Standard insertsProfiling
Type Geometries Insert sizes Type Geometries
Valid for all operation types
Insert sizes
Coupling sizeSquare shank size
Insert widthInsert systemClamping systemTool design (tool in hand)Copy angleMachining limitations ar
Machining limitations f1 , see page 2Machining limitations l1 , see page 2
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.Options
CoroCut 123 or T-MAX Q-Cut 151.2/151.3Screw (CoroCut) / (T-MAX Q-Cut)Right hand/Neutral/Left hand —R/N/L55°–75°Cutting depth ar — 4,0–30 mmDimension f1— 13,0–51 mmProgramming length l1 — 47,9–250 mm
f1min - max
E - G E - H E - J E - L E - L E - L E - L
1212 1616 2020 2525 3225 3232 4040
l1min - max
f1min - max
E - H E - K E - L E - L
C3 C4 C5 C6
l1min - max
13 - 21,2 17 - 25,2 21 - 29,2 26 - 34,2 26 - 34,2 33 - 41,2 41 - 49,2
87,0 - 150 87,0 - 150 91,0 - 150 105,3 - 154 125,2 - 170 125,2 - 170 148,0 - 250
17 - 40 21 - 43 26 - 46 32,5 - 51
47,9 - 70 52,9 - 85 52,3 - 90 53,3 - 95
Form
No.
C-1
050:
108-
EN
G
Fam
ily c
ode
=T5
12
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
General data
Insert seat size
shank size
0 degree shank tools
Insert seat size
Capto size
0 degree Coromant Capto tools
C 151. - --
CoroCut 123 / T-MAX Q-Cut 151.2
55º–75º
C 123 --
ÐState only your options deviating from the above standard
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroCut and T-MAX Q-Cut for profiling
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
Coupling type Coupling type Coromant Capto or Shank
Coupling size Coromant Capto size C3, C4, C5, and C6Shank size h= 12 16 20 25 32 40
b= 12 12/16 16/20 20/25 25/32 32/40
Insert/ geometry type
Insert seat size Type 123-, Insert seat size = E, F, G, H, J, K, LType151.2-, Insert seat size = 30, 40, 50, 60, 80
Insert width Insert width 3,0-8,0
Insert system
Clamping system Screw (CoroCut) / (T-MAX Q-Cut)
Copy angle
Cutting depth ar, Machining limitations see page 2
Cutting depth = 4,0–30 mm
Dimension f1 Machining limitations see page 2
Dimension = 13,0–51 mm
Programming length l1, Machining limitations see page 2
Length = 49,7–250 mm
Tool design (tool in hand)
Right hand=R Neutral=N Left hand=L
Metric stdYour value/ Your choice
Type 123- (X1)=RM, FB, RO, GF Type151.2- (Q2)=4P, 5P, 4U, 4G
Form
No.
C-1
050:
108-
EN
G
Fam
ily c
ode
=T5
12
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
C3, C4, C5, C6h = 16, 20, 25, 32, 40 b = 16, 20, 25, 32, 402,0–8,0 mm
A B
R
L
F
G
123 TF, CM E, F, G, H, J, K, L 151.2 151.3
5E, 4G, 5G, 4U 7G, 4G
20, 25, 30, 40, 50, 60, 80 20, 25, 30, 40, 50
123 FB, RO, GF E, G, H, J, K, L 151.2151.2
3G, 4G 6G
20, 25, 30, 40, 50, 60, 80 60, 80
Dmo
Dmi
Coromant Capto®
Co
roP
ak 0
0.2R
evis
ed
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
CoroCut and T-MAX Q-Cut for face grooving
Coupling sizeShank size
Insert widthInsert systemyr
Tool design (tool in hand)Blade typeInner groove diameter Dmi
Outer groove diameter Dmo
Reinforcement ar
ar2
Machining limitations f1 , see page 2Machining limitations l1 , see page 2
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.Options
CoroCut 123 or T-MAX Q-Cut 151.2/151.3Approach angle—F = 0º or G = 90ºRight hand/Left hand —R/LA/BDiameter Dmi—30–2000 mmDiameter Dmo—34,5–3000 mmY = Yes or N = NoCutting depth—6,6–32 mm, depending on other dimensionsCutting depth—11,6–36 mm, depending on other dimensionsDimension—13,3–67,5 mmProgramming length—33,3–250 mm
Face grooving
Shank holders Tool design Holder style Machining limitations
Clamping systemScrew
Spring
Reinforceed blade face grooving
Blade type First cut diam.
Standard insertsFacegrooving
Type Geometries Insert sizes Type Geometries
Valid for all operation types
Insert sizes
Operation type
f1min - max
E - H E - J E - L E - L E - L E - L
1616 2020 2525 3225 3232 4040
l1min - max
23 - 32 27 - 40 32 - 50 32 - 50 39 - 64 47 - 67,5
E - H E - J E - L E - L E - L E - L
1616 2020 2525 3225 3232 4040
72,3 - 150 80,0 - 150 90,5 - 154 110,5 - 170 110,5 - 170 133,3 - 250
f1min - max
E - H E - K E - L E - L
C3 C4 C5 C6
l1min - max
f1min - max
E - H E - K E - L E - L
C3 C4 C5 C6
l1min - max
17 - 25,2 21 - 29,2 26 - 34,2 26 - 34,2 33 - 41,2 41 - 49,2
75,6 - 150 80,0 - 150 93,9 - 154 113,8 - 170 113,8 - 170 136,6 - 250
f1min - max
l1min - max
17 - 40 21 - 43 26 - 46 32,5 - 51
36,2 - 70 41,2 - 85 40,6 - 90 41,6 - 95
24 - 44 28 - 49 33 - 54 39 - 65
33,3 - 68 38,1 - 68 37,2 - 68 38,2 - 68
Form
No.
C-1
050:
109-
EN
G
Fam
ily c
ode
=T5
13
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
General data
Insert seat size
shank size
0 degree shank toolsInsert seat size
shank size
90 degree shank tools
Insert seat size
Capto size
0 degree Coromant Capto tools
Insert seat size
Capto size
90 degree Coromant Capto tools
C 151. - --
CoroCut 123 / T-MAX Q-Cut 151.2/151.3
A/B
C 123 --
Ð
Form
No.
C-1
050:
109-
EN
G
Fam
ily c
ode
=T5
13
Co
roP
ak 0
0.2
00.0
9.01
R
evis
ed 0
9.03
.06
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
State only your options deviating from the above standard
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroCut and T-MAX Q-Cut for face grooving
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
Coupling type Coupling type Coromant Capto or Shank
Coupling size Coromant Capto size C3, C4, C5, and C6Shank size h= 16 20 25 32 40
b= 16 16/20 20/25 25/32 32/40
Insert/ geometry type
Insert seat size Type 123-, Insert seat size = E, F, G, H, J, K, LType151.2/151.3-, Insert seat size = 20, 25, 30, 40, 50, 60, 80
Insert width Insert width 2,0–8,0
Insert system
Tool design (tool in hand)
Right hand=R Left hand=L
Blade type
Inner groove diameter Dmi
Diameter Dmi — 30–2000
Outer groove diameter Dmo
Diameter Dmo — 34,5–3000
Reinforcement Y= Yes or N= No
Cutting depth ar Cutting depth = 6,6–32 mm, depending on other dimensions
Cutting depth ar2 Cutting depth = 11,6–36 mm, depending on other dimensions
Dimension f1 Machining limitations see page 2
Dimension = 13–67,5 mm
Programming length l1, Machining limitations see page 2
Length = 33,3–250 mm
Approach angle yr F = 0º or G = 90º
Metric stdYour value/ Your choice
Type 123- (X1)=TF, CM, FB, RO, GF Type151.2- (Q2)=5E, 4G, 5G, 4U Type151.3- (Q3)=5E, 4G, 7G
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.Options
Form
No.
C-1
050:
116-
EN
G
Fam
ily c
ode
= T
611
Co
roP
ak 1
4.2
14.1
0.01
Metric or InchQS shanks2020, 2525 (12, 16)R, L1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 (tip seat D, E, F, G, H, J, K, L, M)Depending on insert width
Y/N Diameter
None, Over, Under, Over + Under
Unit systemCoupling typeCoupling sizeTool in handInsert width (gauge insert)CDX (max cutting depth)Reinforcement curveReinforcement curve diameterCoolant type
CoroCut 1-2 for external parting, grooving, turning and profiling
QS shanks
QS -
Ð
R, L
2020, 2525 (12, 16)
State only your options deviating from the above standard
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroCut 1-2 for external parting, grooving, turning and profiling
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
Metric stdYour value/ Your choice
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Form
No.
C-1
050:
116-
EN
G
Fam
ily c
ode
= T
611
Co
roP
ak 1
4.2
14.1
0.01
Unit system
Coupling type
Coupling size
Tool in hand
Insert width (gauge insert)
CDX (max cutting depth)
Reinforcement curve
Reinforcement curve diameter
Coolant type
Metric or Inch
QS shanks
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 (tip seat D, E, F, G, H, J, K, L, M)
Depending on insert width
Y/N
Diameter
None, Over, Under, Over + Under
Coromant Capto
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.Options
Form
No.
C-1
050:
116-
EN
G
Fam
ily c
ode
= T
611
Co
roP
ak 1
4.2
14.1
0.01
Metric or InchCoromant CaptoC3, C4, C5, C6, C8R, L1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 (tip seat D, E, F, G, H, J, K, L, M)Depending on insert width
Y/N Diameter
Over, Under, Over + UnderDepending on coupling sizeDepending on coupling size
Unit systemCoupling typeCoupling sizeTool in handInsert width (gauge insert)CDX (max cutting depth)Reinforcement curveReinforcement curve diameterCoolant type WF (tool width) LF (tool length)
CoroCut 1-2 for external parting, grooving, turning and profiling
C -
Ð
R, L
Coromant Capto
C3, C4, C5, C6, C8
State only your options deviating from the above standard
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroCut 1-2 for external parting, grooving, turning and profiling
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
Metric stdYour value/ Your choice
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Form
No.
C-1
050:
116-
EN
G
Fam
ily c
ode
= T
611
Co
roP
ak 1
4.2
14.1
0.01
Unit system
Coupling type
Coupling size
Tool in hand
Insert width (gauge insert)
CDX (max cutting depth)
Reinforcement curve
Reinforcement curve diameter
Coolant type
WF (tool width)
LF (tool length)
Metric or Inch
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 (tip seat D, E, F, G, H, J, K, L, M)
Depending on insert width
Y/N
Diameter
Over, Under, Over + Under
Depending on coupling size
Depending on coupling size
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions. – Quick quotation
– Easy to order – Competitive delivery
Note! For specific details regarding the options, contact your Sandvik Coromant sales representative.Options
Form
No.
C-1
050:
116-
EN
G
Fam
ily c
ode
= T
611
Co
roP
ak 1
4.2
14.1
0.01
Metric or InchShank holders2020, 2525, 3225, 3232 (12, 16, 20)R, L1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 (tip seat D, E, F, G, H, J, K, L, M)Depending on insert width
Y/N Diameter
None, Over, Under, Over + UnderDepending on coupling sizeDepending on coupling size
Unit systemCoupling typeCoupling sizeTool in handInsert width (gauge insert)CDX (max cutting depth)Reinforcement curveReinforcement curve diameterCoolant type WF (tool width) LF (tool length)
CoroCut 1-2 for external parting, grooving, turning and profiling
Shank holders
QS -
Ð
R, L
-
2020, 2525, 3225, 3232 (12, 16, 20)
State only your options deviating from the above standard
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroCut 1-2 for external parting, grooving, turning and profiling
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
Metric stdYour value/ Your choice
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Form
No.
C-1
050:
116-
EN
G
Fam
ily c
ode
= T
611
Co
roP
ak 1
4.2
14.1
0.01
Unit system
Coupling type
Coupling size
Tool in hand
Insert width (gauge insert)
CDX (max cutting depth)
Reinforcement curve
Reinforcement curve diameter
Coolant type
WF (tool width)
LF (tool length)
Metric or Inch
Shank holders
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 (tip seat D, E, F, G, H, J, K, L, M)
Depending on insert width
Y/N
Diameter
None, Over, Under, Over + Under
Depending on coupling size
Depending on coupling size