KNF Pocket Card 20021 Klamath NF Pocket Cards Fire Season 2002.
12/09/20021 Engineer Training Program Drivers & AP Installation Guide for N34BS3 Written By Suzanne...
-
Upload
sarah-burton -
Category
Documents
-
view
212 -
download
0
Transcript of 12/09/20021 Engineer Training Program Drivers & AP Installation Guide for N34BS3 Written By Suzanne...
12/09/2002 1
Engineer Training ProgramEngineer Training Program
Drivers & AP Installation Guide for
N34BS3
Written By
Suzanne Yu
Uniwill Computer Int’l Corp.3358 Gateway Blvd. Fremont, CA 94538Tel: 510-580-6888Fax: 510-580-5666
12/09/2002 2
ContextContext
• Component Driver Installation
• Mini-PCI Wireless Card
• Special Function
12/09/2002 3
Component Driver InstallationComponent Driver Installation
• Preface
• Installation in Win XP
• Installation in Win 2K
• Installation in Win ME
12/09/2002 4
PrefacePreface
• Windows 98 SE– Microsoft does not support it
any more. The drivers for it are still provided, but do not be guaranteed to work properly
• Suppose Optical Drive is mapped to drive D:
• After installing OS, several unknown devices will be shown in Device Manager
12/09/2002 5
Installation in Win XPInstallation in Win XP
• Audio Driver
• Video Driver
• LAN Driver
• Modem Driver
• PCMCIA Driver
• USB 2.0 Driver
12/09/2002 6
Audio Driver Audio Driver
• Go to D:\Driver\AUDIO• Double click “SETUP” icon• Follow the instructions• After done the installation,
click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 7012 Audio Driver, should be shown in Device Manager
12/09/2002 7
Video Driver Video Driver
• Go to D:\Driver\VGA\Win2K&XP
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 650 Display adapters, should be shown in Device Manager
12/09/2002 8
LAN Driver LAN Driver
• Go to D:\Driver\LAN
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 900 PCI Fast Ethernet adapter, should be shown in Device Manager
12/09/2002 9
Modem Driver Modem Driver
• Go to D:\Driver\MODEM\WINXP
• Double click “SETUP” icon, the driver will be automatically installed
• After done the installation, the symbol, Smart Link 56K Modem, should be shown in Device Manager
12/09/2002 10
PCMCIA Driver PCMCIA Driver
• Go to D:\Driver\PCMCIA
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”,
• The symbol, O2Micro OZ711EC1/M1 PCMCIA adapters and SmartCardBus Reader, should be shown in Device Manager
12/09/2002 11
USB2.0 Driver USB2.0 Driver
• Go to D:\Driver\USB2.0
• Double click “USB20” icon
• Follow the instructions
• After done the installation, click “Yes”, the system will auto-restart
• After re-start, the symbol, SiS 7002 USB 2.0 Enhanced Host Controller, should be shown in Device Manager
12/09/2002 12
Installation in Win 2KInstallation in Win 2K
• Audio Driver
• Video Driver
• LAN Driver
• Modem Driver
• PCMCIA Driver
• USB 2.0 Driver
12/09/2002 13
Audio Driver Audio Driver
• Go to D:\Driver\AUDIO• Double click “SETUP” icon• Follow the instructions• After done the installation,
click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 7012 Audio Driver, should be shown in Device Manager
12/09/2002 14
Video Driver Video Driver
• Go to D:\Driver\VGA\Win2K&XP
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 650 Display adapters, should be shown in Device Manager
12/09/2002 15
LAN Driver LAN Driver
• Go to D:\Driver\LAN
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 900 PCI Fast Ethernet adapters, should be shown in Device Manager
12/09/2002 16
Modem Driver Modem Driver
• Go to D:\Driver\MODEM\WIN2K
• Double click “SETUP” icon, the driver will be automatically installed
• After done the installation, the symbol, Smart Link 56K Modem, should be shown in Device Manager
12/09/2002 17
PCMCIA Driver PCMCIA Driver
• Go to D:\Driver\PCMCIA
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish Yes”, to restart the system
• After re-start, the symbol, O2Micro OZ711EC1/M1 PCMCIA adapters and SmartCardBus Reader, should be shown in Device Manager
12/09/2002 18
USB2.0 Driver USB2.0 Driver
• Go to D:\Driver\USB2.0
• Double click “USB20” icon
• Follow the instructions
• After done the installation, click “Yes”, the system will auto-restart
• After re-start, the symbol, SiS 7002 USB 2.0 Enhanced Host Controller, should be shown in Device Manager
12/09/2002 19
Installation in Win MEInstallation in Win ME
• Audio Driver
• Video Driver
• LAN Driver
• Modem Driver
• PCMCIA Driver
• USB 2.0 Driver
12/09/2002 20
Audio Driver Audio Driver
• Go to D:\Driver\AUDIO
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 7012 Audio Driver, should be shown in System Properties
12/09/2002 21
Video Driver Video Driver
• Go to D:\Driver\VGA\Win98&ME
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 650 Display adapters, should be shown in System Properties
12/09/2002 22
LAN Driver LAN Driver
• Go to D:\Driver\LAN
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Finish”, the system will auto-restart
• After re-start, the symbol, SiS 900 PCI Fast Ethernet adapter, should be shown in System Properties
12/09/2002 23
Modem Driver Modem Driver
• Go to D:\Driver\MODEM\WINME
• Double click “SETUP” icon, the driver will be automatically installed
• After done the installation, the symbol, Smart Link 56K Modem, should be shown in System Properties
12/09/2002 24
PCMCIA Driver PCMCIA Driver
• Go to D:\Driver\PCMCIA\Win9xMe
• Double click “SETUP” icon
• Follow the instructions
• After done the installation, click “Yes” to restart the system
• After restart, following the instructions, click “Yes” to restart the system
• After restart, following the instructions, click “Yes” to restart the system
• After restart, the symbol, O2Micro OZ711EC1/M1 PCMCIA adapters and SmartCardBus Reader, should be shown in Device Manager
12/09/2002 25
USB2.0 Driver USB2.0 Driver
• Because WinMe does not support USB 2.0, there is no Driver. Therefore, there is a unknown device in system Properties
• Support USB 1.1
12/09/2002 26
Mini-PCI Wireless CardMini-PCI Wireless Card
• Preparation
• Driver Installation
• Configuration
12/09/2002 27
PreparationPreparation
• Optional device• Gemtek WL-350F
– Support IEEE 802.11b
• Make sure the card is properly plugged into Mini-PCI socket
• Make sure two antennas are properly connected into the card
Connectors
12/09/2002 28
Driver InstallationDriver Installation
• Go to “D:\Driver\Minipci-Wirless LAN”, double click “GemtekMiniPCI version 001”
• After done the installation, click “Finish” to restart the system
• After restart, the icon IEEE 802.11 11Mbps Wireless LAN Card, should be shown in Device manager
12/09/2002 29
ConfigurationConfiguration
• After installing driver, there is a symbol on Taskbar
• Click the Symbol, the screen,“PRISM Wireless Settings”, will be popped up
• Go to “Status” to check link quality
• Go to “Configuration”, to configure the function
12/09/2002 30
Special FunctionSpecial Function
• TV-Out Function
• Dual-View Function
12/09/2002 31
TV-Out FunctionTV-Out Function
• Connecting TV and Notebook with S-Video cable
• Make sure the TV system is correctly set in BIOS settings
• Go to “ Control Panel Display Settings Advanced Utility Manager”,
• Click “Driver Mode Settings”, the screen will be popped up
12/09/2002 32
TV-Out Function(continued)TV-Out Function(continued)
• Disable “Auto” in Primary
• If “Driver mode” is set to “Single”, selecting “TV” in “Primary”
• If “Driver mode” is set to Mirror or Multimonitor”, selecting “TV” in “Display_2”
12/09/2002 33
Dual-View FunctionDual-View Function
• Go to “ Control Panel Display Settings Advanced Utility Manager”,
• Click “Driver Mode Settings”, the screen will be popped up
• Disable “Auto” in Primary
• Selecting “Mutimonitor” in “Driver Mode”
• In “Display_2”, could select “VGA or TV”, depending on necessity