1201 Industrial Ave., Holland, MI. Thursday October 27th 10 · PDF file1201 Industrial Ave.,...
-
Upload
hoangduong -
Category
Documents
-
view
216 -
download
3
Transcript of 1201 Industrial Ave., Holland, MI. Thursday October 27th 10 · PDF file1201 Industrial Ave.,...
PH: 717-854-0316 FX: 717-843-7826
AUCTION!AUCTION!AUCTION!Thursday October 27th 10am 1201 Industrial Ave., Holland, MI.
Preview: Wednesday, October, 26th 9am-4pm
Furniture & Clocks
On The Premises & Simultaneous Web Cast!
Holland, MI. Mfg. Facility
CNC Routers & Machining Centers
Heian HR-442PF-R4-1616W CNC Router (1999)
Twin 63” x 63” vacuum tables, (4) 7.5/8.8Kw Routermotors, 17,400 max RPM pneumatic tool release, (4)piggyback drill motors, 2.2KW, 17,400 RPM, Fanucseries 18i-m controller with PC, monitor, and keyboard,Servo drive on all axis, 480V, s/n 9900366H23658,Dekker Vacuum Technologies Vacuum Pump, 20hp220/440V, m/n VMX0300KA1-00, s/n AI5662.
CMS Giotto M CNC Machining Center w/ ATC (1998)
Twin 4’x5’ work areas with (4) moveable parts holderswith (3) moveable vacuum pods each, (6) popup posi-tioners on each table, CMS OSAI numerical controllerwith keyboard, (1) main router 8KW 18,000 RPM with Caxis, (8) position ride along carousel tool changer, (10)vertical boring heads along Y axis, (10) vertical boringheads along X axis, (2) horizontal boring heads along Y(-) axis, (2) horizontal boring heads along Y(+) axis, (2)horizontal boring heads along X(-) axis, (2) horizontalboring heads along X(+) axis, 1.8KW boring motor for Yaxis, 1.8KW boring motor for X axis, (2) Siemens 4.4KWvacuum pumps, s/n 1952
CNC Panel Saw
Schelling FM-H 330/310 Rear Loading (2000)
10.6’W x 10.2’L x 3.15”H Max Cutting Capacity, 37.4”Working Table Height, 3.75” Max Saw Blade Projection,Main Saw 20HP, 370mm Max Main Saw Blade, ScoreSaw 3.4HP, 20mm max score saw blade, Saw Carriage1.4Hp AC Servo drive, 1-393 FPM Forward, 393 fpmreverse, Cross Aligning 2.75” – 86”, Allen Bradley IBMPC w/ Keyboard & mouse, (3) 23” x 83” Air flotationtables (1 fixed – 2 moveable), (8) Grippers w/ 3 .15”Opening spaced: 2.56” / 10.43” / 18.31” /30.12” / 41.93”/ 53.74” / 77.36” / 112.8”, Grandeur Powered infeed caseroll section 57”W x 165”L (11) 5” dia. Powered Rolls,Grandeur Powered outfeed case roll section 57”W x165”L (11) 5” dia. Powered Rolls Powered HydraulicScissor Lift Section 9,900# Capacity 5.4HP 63”W x122”L 32” Max Stack Height (7) 4” dia. Powered Rolls,220/400 Volt 86/48 amp, 25KW Total, s/n 202.406
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
www.irsAuctions.com 717.854.0316
Heian HR-442PF-R4-1616W CNC Router (1999)
CMS Giotto M CNC Machining Center Close Ups
CMS Giotto M CNC MachiningCenter w/ ATC (1998)
Schelling FM-H 330/310 Rear Loading (2000)
1
Schelling FM-H 330/310 Rear Loading Alternate Views
On The Premises &Simultaneous Web Cast!
www.irsAuctions.com
1999
2000
1998
Wide Belt Sanders / Denibbers
Costa 53TR CTT 1350 Wide Belt w/ Sensing (2000) 53 ½” wide vacuum belt, 12” load space, sensing wheelsprior to crossbelt, 1st Crossbelt – 20KW 150mm x7350mm belt, 2nd Contact Drum 18.5KW 1380mm x3250mm belt, 3rd Platten 14KW 1380mm x 3250mmbelt, 4th Platten 14KW 1380mm x 3250mm belt, controlconsole with monitor and keyboard, 12.5KW vacuumbed motor, min/max working thickness 3-160mm, work-ing table height 900mm, feed motor power 4, 6KW, feedspeed 3-30 m/min, thickness setting motor power 0,63KW, 480V, total amps 146, total KW 77, s/n 991103AC1.
Costa Top & Bottom Wide Belt Sanding Line (1996)Bottom head machine, 47” wide vacuum belt, 26” loadspace, Constant pass line, 1st Contact 30KW, 2ndContact 22KW, 3rd Contact 15KW, 7.5/8.6KW vari-drivemotor, 5.5/6.4 KW vacuum blower motor, top headmachine, 47” wide vacuum belt, 1st Contact 30KW, 2ndContact 22KW, 3rd Contact 15KW, 7.5/8.6KW vari-drivemotor, 5.5/6.4 KW vacuum blower motor, control consolewith amp gauge on each head, 440V, 263Amp, 250hptotal, s/n 960423AC1.
Opti-Sand R-52-V Rotary Denibbing Sander (2001)
52” width capacity, the Opti-Sand R-52-V has 4 sandingspindles, (2) spindles are 64” long each with a 5hp motorand (2) spindles are 48” long each with a 3hp motor. (2)spindles rotate clockwise and (2) spindles rotate coun-terclockwise. The spindle speed is variable from 50-1,000 RPM by means of a frequency inverter. All of thespindles are placed on one main head, or plate, that alsorotates. The head rotation adjusts from 5-25 RPM by fre-quency inverter. There is motorized push buttonup/down adjustment of the sanding heads and digitalreadout for sanding height. The R-52-V to be setup for460V, 3-Phase, 60Hz power. The Opti-Sand R-52-V isequipped with a variable vacuum hold-down system with(2) 10hp motors. The vacuum system is built into thebase of the machine. With sound insulation material sur-rounding the vacuum pumps to reduce the operatingnoise level. The conveyor belt speed adjusts from 5-50FPM by a 3hp gear motor and frequency inverter. Netweight 6,800 lbs, 42hp, HYTROL powered roller con-veyor, m/n 190-SP, 37” wide x 36’, rubber coated 2”diameter rollers.
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
2Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
Costa 53TR CTT 1350 Wide Belt w/ Sensing (2000)
Costa Top & Bottom Wide Belt Sanding Line (1996)
Opti-Sand R-52-V Rotary Denibbing Sander
Don’t Wait, Set Up Your Web Cast Account Today!
Late Model Sanders!
2000
1996
2001
Rough Mill LineAutomated Lumber Handling Hydraulic Tilt Hoist
14’ Capacity, (4) Arms 48” x 54”, Spaced 48” o.c., 20 HP 220/440VHydraulic pump motorAutomated Lumber Handling Chain Deck
11’ Wide, (6) Chains, Spacing of Chains: 24”, 36”, 24”, 24” & 24”, 2 HP220/440V motor
Newman Powered Belt Conveyor
30”W x 24’L, Hydraulic operated
Coe Moisture Meter Moisture Detector
MR30 multi sensor LMD, s/n 58318
Newman S-382 HD Double-Sided Planer
30” Width Capacity, 6” Thickness Capacity, Newman Helical CarbideCutter Heads, Bottom Head 40HP 220/440V, Top Head 75 HP 220/440V,25 HP 220/440V Hydraulic Pump Motor, Pneumatic Chip Breakers, (15)Pneumatic Drive Tires, s/n 13910
Automated Lumber Handling Flat Top Chain Deck
150”W x 21’L, (6) Chains, Spacing: 20”, 18”, 36”, 34” & 38”, 3 HP 220/440Vmotor
BarrMullin Optimizer Fence
(used w/ M J Gang Rip) 2 Lasers Moving147”W x 90”L Infeed Chain Deck, (6) Chains Spaced: 20”, 18”, 36”, 34”,38”, 18’L Moving Fence, (12) Canted Powered Case Rolls 40” x 4.5”D, 2HP 220/440V motor, Control Panel w/ (2) Monitors & Keyboard, (2) MovingLaser Lights
Mereen Johnson 424-DC/SR (1993)
24” Width Capacity, 26”W Rubberized Track, Select-A-Rip MoveableBlade, Bijur Mist Lubricating System, 3HP 220/440V Vari-Drive motor,Automated Lumber Handling Powered Belt Conveyor, 30”W x 120”L 2 HP220/440V, (2) 30” x 9” Pinch Rollers, s/n MJ-4599
(2) Automated Lumber Handling Steps Over Line
Automated Lumber Hand. Flat Roof Top Chain Deck
12’W x 24’L, 6-chains spaced: 24”, 48”, 24”,24”, 24”, 5 HP 220/440V
Ultimizer 800B-100 Optimizing Cut-off Saw (2001)
Left-hand orientation, 42” saw passline, 20” blade, ICD width scanner, con-trol console with monitor and keyboard, 7 ¾” wide belt conveyor, 7” x 4”cutting capacity (approx.), 8” wide x 16’ long double-sided marking station,9” wide x 40’ long powered belt conveyor, 7 pneumatic kickers, end scrapdischarge, s/n 800B-181
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
www.irsAuctions.com 717.854.0316
Auto. Lumber Hand. Hyd. Tilt Hoist
3
Newman S-382 HD Dbl. Sided Planer
Mereen Johnson 424-DC/SR (1993)
Ultimizer 800B-100 Opti.Cut-off (2001)
Automated Lumber Handling Flat Roof Top Chain Deck Coe Moisture Detector Barr Mullin Opti. Fence
Late!
2001
Late!
Late! Late!
Late!
Moulders
Weinig Profimat 23 E 5-Head Moulder (2000)
.787” – 9.055” width capacity, .315” – 4.725” heightcapacity, 1st Bottom 7.5 KW 220/440V 6000 RPM, 2ndRight 7.5 KW 220/440V 6000 RPM, 3rd Left sharedmotor with 2nd head, 4th Top 11 KW 220/440V 6000RPM, 5th Bottom 220/440V 7.5 KW 6000 RPM, Cardandrive, 3 KW feed motor 16-78 FPM, manual digital read-outs – all heads, power height adjustment, 460V, s/n89695, Ziwo feeder, m/n CL11, 440 V, s/n 87-0898
Diehl 5006 6-Head Through Feed Moulder (1998)
Width capacity 9.25”, thickness capacity 4.75”, speedrange 18-110 f.p.m., jointer table cut .4”, right guidemovement .4”, Cardan drive, 10 hp 220/440V feedmotor, outboard bearings on horizontals (except 1st bot-tom), 1st Bottom 15 hp 220/440V 1 13/16” spindle, 2ndRight 15 hp 220/440V 1 13/16” spindle, 3rd Left 15 hp220/440V 1 13/16” spindle, 4th Top 20 hp 220/440V 113/16” spindle, 5th Top 20 hp 220/440V 1 13/16” spindle,6th Bottom 15 hp 220/440V 1 13/16” spindle, Manualdigital controls all heads, grooved and solid beds, accu-rate digital proscale, pneumatic door open and close,460 V, s/n 98M-6415-5831, Z drive 110 hopper feeder,s/n 110-0064
Wadkin XE 416 6-Head Through-Feed Moulder
230mm x 130 mm capacity, 1st Bottom 10 hp 220/440V1 13/16” spindle, 2nd Right 15 hp 220/480V 1 13/16”spindle, 3rd Left15 hp 220/440V 1 13/16” spindle, 4thTop 20 hp 220/480V 1 13/16” spindle, 5th 15 hp220/440V 1 13/16” spindle, 6th Bottom 15 hp 220/480V1 13/16” spindle, Cardan drive, 15 hp 220/440V Varidrivefeed motor, 10 to 50 m.p.m., outboard bearings, manualdigital readouts on each head, power raise and lowermotor 1.5 hp 220/440V, 440V, s/n 93129, Z-drive 110hopper feeder, s/n 110-050.
(5) Moulder Return Conveyors
1 Metzgar, 4 custom
Diehl Vonnegut 4-Head Moulder
Hopper feed, 7” x 4” capacity (approx), 1st Top – 10hp220/440V, 2nd Left – 5hp 220/440V, 3rd Right – 5hp220/440V, 4th Bottom – 10hp 220/440V, (2) 8” long cor-rugated feed rolls, 3hp feed motor 220/440V, s/n D6466
Moulding Heads
Approximately 50, used with the above listed moulders.
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
Weinig Profimat 23 E 5-Head Moulder (2000)
Diehl 5006 6-Head Through-Feed Moulder (1998)
4
Diehl 5006 Moulder (1998) Weinig Profimat 23 E
Wadkin XE 416 6-Head Through-Feed Moulder
Diehl Vonnegut 4-Head Lg. Qty. of Moulder Heads
2000
2000
1998
1998
Low Speed Grinders / HogsCresswood LR30DST Destroyer Horiz. Low Speed (2000)
75hp main motor 220/440V, 3hp varidrive motor, 30” wide x 18’long vibratory conveyor, complete sound enclosure, s/n 1100200
Cresswood EF-24-40 Destroyer Horiz. Low Speed (1997)
24"W Infeed, 40hp 220/440V Main Motor, 1 HP 220/440V Motor,vibrating infeed conveyor 23”W x 13’L, s/n1330897
Williams 17545 Hammer Hog
50hp 220/440V w/transfer fan
High Frequency GluersRadio Frequency Services High Freq. Gluer (2000)
m/n RFSN30505A0500PC, clamping area is 50” x 100” x 10”thick, clamping pressure is applied by hydraulic cylinders andpusher shoes, pressure is capable of exerting 200 psi over fulllength of 10” thick load, edge pressure (100”) applied by thirty-two (32) each 2” bore x 4” stroke hydraulic cylinders, supplied bya common manifold for uniform pressure across the full length ofthe panel, 15 hp hydraulic pump unit equipped with a 50 gallontank, top pressure applied by four (4) each 2” bore x 18” strokehydraulic cylinders (two rows), 30KW internal solid state RFS RFGenerator can cure approximately 3000 sq. in. of glue line areaper minute, wired for 480V 60 Cycle 3-Phase operation, 120V ACcontrols, Auto Cure: feature utilizes the PLC in the press to deter-mine when the glue lines are completely cured then stops thepress regardless of the timer setting, the press will still feature thestandard timer which can be enabled by a switch, 54”x102” shut-tle table, 1hp 220/440V motor, 53”x100” outfeed table
Slat Conveyor Glue Spreader
17 ¾” width capacity, 21” x 8’ infeed slat conveyor, 21” x 8’ out-feed slat conveyor, 1 hp single phase motor
L&L Du-All DA50 High Frequency Gluer
50” x 100” capacity, (11) pneumatic top pressure cylinder, (6)pneumatic side pressure cylinder, (2) pneumatic open & closecylinder, 440V 45 amp, s/n 87-793
Workrite 4000 Wood Welder
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
www.irsAuctions.com 717.854.0316
Cresswood LR30DST Horiz. Low Speed Grinder
Cresswood EF-24-40 Low Speed Horiz. Grinder
Radio Frequency Services Hi Freq. Gluer (2000)
L&L Du-All DA50 High Frequency Gluer
5
Set Up Your Webcast Account Today @ www.irsAuctions.com
On The Premises Auction& Simultaneous Web Cast!
This is a Landmark Sale, Mark YourCalendar & Plan to Attend Now!
2000
1997
2000
Late!
Combination Dowel EquipmentKoch Sprint-PTP-L CNC Boring and Dowel Machine (2001)
92” length capacity (2 zone), 17 ½” x 92” work table, control con-solel with PC, monitor, and keyboard, (8) moveable pneumatichold-downs, .9 KW boring motor, 480V, 9.5A, 3-Phase, s/nA0103/6560
Koch CNC Sprint-PTP Bore & Dowel Insert Machine (2000)
49” working capacity, 17 ¾” x 49” table – 2 zone, .9Kw boringmotor, (8) moving, pneumatic hold downs, control panel with PC,monitor, and keyboard, 480V 4Kw total, s/n A0004/6338
Accu Systems DS1 Dowel Inserter Gun with Hopper
s/n 96HC1173
Wide Belt SandersTimesaver 337-200B Orbital Cross Belt
2-Head Sander 36 ½” wide belt, 32” load space, 6” wide cross-belts, 1.5 hp 220/440V each head, power raise and lower, 3hpvaridrive motor, s/n 19126
Timesaver 337-3 AHB
3-Head Denibber 37” wide belt, 3 denibbing heads on an angle,1st Head - 3hp 220/440V, 2nd Head – 3hp 220/480V, 3rd Head– 3hp 220/440V, frequency inverts on all heads, 3hp varidrivemotor, s/n 19127
Timesaver 325-2
2-Head Wide Belt Sander 25” width capacity, 19” load space, 1stHead – contact drum 30 hp 220/440V, 2nd Head – Platen 2.5hp220/440V, 2hp 220/440V varidrive motor.
Timesaver 125-1HD
Top Head Wide Belt Sander 25” width capacity, 22” load space,single combo head, 15hp main motor 220/440V, 1hp varidrivemotor 220/440V, load motor, s/n 19438Y
Timesaver 125-1 HDB
Bottom Head Wide Belt Sander 25” width capacity, 48” loadspace, single combo head, 20hp 220/440V main motor, 1.5hpvaridrive motor, load meter, s/n 21939
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
Koch Sprint - PTP - L CNC Boring & Dowel (2001)
Koch CNC Sprint - PTP Bore & Dowel (2000)
6
Timesaver 337-200B & Orbital Belt 337-3 AHB
Timesaver 337-200B Orbital Accu Sys. DS1 Dowel GunTimesaver Top & Bot. LineTimesaver Denibber
www.irsAuctions.com
2000
Late!
2001
Dovetail EquipmentDodds SE-25CNC Single End Dovetailer (1999)
25 spindles, 10hp, 12,000 RPM, spindle lubrication: auto, oilmist, digital readouts for front and backside stops, drawerheight: 1 ¾” – 25”, top to bottom, drawer width: 8” – 48”, draw-er depth: 7” minimum front to back, material thickness: 3/8” –3/4” sides, 7/16” 1-3/4” fronts/backs, 220V, 3-Phase, 60 cycle,41 amp, 440V, 3-Phase, 60 cycle, 32 amp, s/n D99031-168.
(2) Dodds C-36 Dovetail Drawer Clamp
42” opening, pneumatic traverse, 26 ½” high jaws, s/n C8974-255,s/n n/aDodds GP Dovetail Gluer
s/n 91027-305
Double End TenonerCelaschi TSA-400C Double End Tenoner
113” max opening (approx.), 1st Post – Universal tilting score1.5hp/2.5 hp 600V 3600/7200 RPM, 2nd Post Front side - tilt-ing universal, 5.8KW, 220/380V, 3000/6000 RPM, 2nd PostBack side – universal jump, 5.5/8hp, 340/600V, 3600/7200RPM, 3rd Post Front side – 5.5/8hp 340/600V, 3600/7200RPM, 3rd Post Back side – universal tilting, 5.5/8hp,340/600V, 3600/7200 RPM, power traverse, 3” wide rubber-ized track, pop up dogs 15 ¾” on center, Caterpillar styleupper hold-down belts, Carter laser alignment light, 50 KVAfrequency converter, s/n 3307
Double Sided Planer LineTimesaver 337-1K Planer (1997)
Gladu replaceable cutter spiral carbide head, 36” WidthCapacity, 24” Load Space, 40hp 220/440V Main Motor, 10 HP220/440V Hydraulic Pump Motor, Powered Open & Close,Amp Meter, Accurate Pro-Scale, hyd. feed, s/n 25719Whitney S-600 Facer
36" Width Capacity, 15 HP 220/440V Main Motor, 1.5 HPpower open / close motor, Rubberized upper track, carbidecutter head, s/n 17967Metzgar Powered Belt Conveyor In between conveyor, 36”wx 10’L, ½ HP 220/440V, Allen Bradley PLC controller
www.irsAuctions.com 717.854.03167
Dodds SE-25CNC Single End Dovetailer (1999)
Celaschi TSA-400C Double End Tenoner
Timesaver Planer (1997) & Whitney Facer
Whitney S-600 Facer Timesaver 337-1K (1997) Dodds C-36 Dovetail ClampTimesaver 337-1K Planer Hd.
www.irsAuctions.com
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
1999
Late!
1997 Qty. 2
Stile Bore & Sander Profilamatic Sanding Stile Bore & Sander
Four 2hp drill units three spindle heads, drill distance 7/8”, 2-5/8”, 3.5” oncenter, pneumatic movement on individual THK ways system, independentcontrol of each unit, four 2hp belt sanding units, two units designed as drumsander, two units designed as shoe sander, belt size 2.000” width x 109.5long, automatic tracking system, dust hood and guards, belt feed throughsystem, holddowns and pressure systems, 4.000” wide Linatex conveyorbelt, .25hp DC variable speed drive up to 45 feet per minute, (7) accuratepro-scale digital readouts,
Cleat Block MachineNichols Cleat Block Machine
3” to 18” cleat length, ¾” x ¾” stock, (2) 1hp 220/440V Boring motors with3 adjustable boring heads on each side, 1.5hp 230/460V cutoff saw, 8” sawblade capacity, 2 pneumatic hold downs, pneumatic boring movement, hop-per feeder, pneumatic infeed pusher, pneumatic saw movement, digitalreadout, average production is 20 blocks per minute.
Grinding RoomWeinig Rondamat 931 Profile Grinder
Grinding wheel diameter max 8 - 55/64”, Grinding wheel width 13/64”,Grinding wheel bore 2-23/64”, Maximum tool diameter 11-51/64”, Minimumtool diameter 3-59/64”, Maximum tool width 9-3/64”, Grinding wheel drive1.5hp, rotation 1420 RPM, Coolant pump drive 0.28kW, Coolant tank capac-ity approx. 26.5 gallons, s/n 931-314.
Stehle PSM Profile Grinder
2.2 KW, 220V 3-phase, 10” capacity, digital RPM gauge, s/n 3796189
Wadkin Optical Moulding Head Setup Reader
Opticass optical computer-aided setting system, 14” capacity
Case ClampsHess Laura LA000086/003 Case Clamp (2000)
50 ½” high x 97 ½” long capacity, (6) horizontal pneumatic clamps, (4) ver-tical pneumatic clamps, 220V 75Kw power with Open/Close motor, s/nLA0000861003
Hess Case Clamp
53”high x 98” long capacity, (8) vertical pneumatic clamps, (6) horizontalpneumatic clamps, .55Kw 220V power raise/lower motor, s/n100712/101989
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
Profilamatic Stile Bore w/ Sanding
Hess Laura Case Clamp (2000)
Hess Case Clamp Stehle PSM Profile Grinder
Weinig Rondamat 931 Profile Grinder
Nichols Cleat Block Machine
8
On The Premises Auction & Simultaneous Web Cast!This is a Landmark Sale,
Mark Your Calendar Plan to Attend Now!
www.irsAuctions.com
Late!
1996
2000
Frame Clamps(3) Lancaster 1410-B-275 Easel Clamps
2 pneu. cyl., 93” x 62” cap., (High Jaws) 55”x84” cap., 46”x84”cap. s/n 1410-B-275,1410-B-393, 1410-B-186 (2) Lancaster 1861-B-211 Frame Clamps
46”x84” cap., (2) pneu. pressure cyl. s/n 1861-B-211, 1861-73Lancaster 1200-B-409 End Clamp Pneu..(2) Handy 967 Frame Clamp
3 pneu. cyl., s/n M6XC967, E1XB967
ForkliftsNissan 35 CPJ01A18V Forklift
3,500lb. cap. LP gas, sideshift, 2852 hours, s/n CPJ010-9N1600Nissan 30 N0115V Forklift
3,000 lb. cap. Elect., sideshift, 2900 lb. lift cap., 169” lifting ht.,3447 hrs., s/n N01-700595Kalmar ACC100RC LP Forklift
6,500 cap. LP gas, 171” lift ht., dual front tires, 2214 hrs., s/n650024Yale Type E Forklift
2,000# cap., elect., 1059 hours, s/n 162GCrown Lift & Ride TWR3540-280
24V, 34” x 25” lift platform, s/n 6A201265Crown RC3000 Stand-Up Forklift
Elect., sideshift, 2750# lift cap.,190” lift ht.,1563 hours, s/n1A200607Crown Electric Walk Behind, 2000 lb. cap., s/n 1A208229Schaeff E-2000B Stand-Up Forklift
Elect., 8275 hrs., s/n 10268710Big Joe Walk Behind Electric Forklift
2000# Cap., Built-in Charger, s/n 346393
Walk Behind Electric ForkliftsCrown 2000#, m/n W21-90-S, s/n L-6386-2, Crown 2000# s/n1A231439, Prime Mover 2000# m/n SN-20, s/n 1555, Crown
2000# s/n 1A208229, Crown 1500# m/n WT-90-S, s/n L-6180,Prime Mover 4500# m/n PMX2, s/n PMX2 237359, Crown
2000# s/n 1A1011294Factory Cart FC1001 floor cleaner, s/n 34-11320
Finishing LinesGiardina G95/08 2-head roll coat line w/oven (2001)
Machine width 1,350mm, 1,320mm working width, loading beltconveyor 55” wide x 75” long, .5HP, roll coat machine, .75HP, Jet-hot air drying tunnel, equipped with 3 infra-red twin courts lamps,9.75KW each, suitable for application of UV high and mediumviscosity putties & waterbase, s/n 1151/2 More info availableupon request.
Finishing Line
(12) Spray Booths, 11', 8’deep x 10’ high x 10’ wide, pneumaticsliding doors, (2) explosion-proof lights, Drying Tunnel, (6)Flammable Cabinets, (16) Pressure Spray Pots, Red Devil PaintShaker s/n F13167
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
www.irsAuctions.com 717.854.0316
Nissan 35 Forklift Nissan 30 Forklift
Kalmar LP Forklift
Lancaster 1861-B & 1410-B Frame Clamps
Overview of Forklifts
9
Late! Late!
Late!
2001
Qty. 5
Crown Stand-Up Forklift
Giardina G95/08 2-head roll coat line w/oven
Rolling StockStoughton Van Trailer 53’ (2000)
Vin# IDW1A53231B483186(5) Great Dane 48'Trailers
65,000lbs,Vin# 1GRFA9624DB113714,1GRFA9620DB113709, 1GRFA962CDB113703,1GRFA9625EF049801 & 1GRFA9629FB049803Ford L9000 Semi Tractor
422,621, sgl. axle, VIN #1FDYR90L5HVA47414Ford Club Wagon E-350 Van
15 passenger, 77,000 miles, V-8 engine, AC/Rear AC / PW/ PL/ TW/ AM-FMCass. / CC, vin# 1FBSS31L5WHB25619Cushman Electric Car Minute Miser s/n 95003932
Dust Collection Dust Star 12-456-704 Dust Collector (1990)
IAP 542 EHD B ARR 1 transfer fan, approx. 65,000 cfm @14" sp, 250hp, 460v, 40hp aux. transfer fan, 12' bags, 456bags, s/n IAP #901082, Rotary Air Lock, s/n 90-36012-1,order #1290 36012Pneumafil 13.5 Dust Collector
250hp 460V Main Transfer Fan, 20 HP 220/440V AuxiliaryTransfer Fan, (2)Rotary Air Lock, s/n 31149-2American Air filters Dust Collector
size 1-306, 125hp transfer fan, 25hp transfer fan (to bin), 4rotary air locks, s/n AT240025Wheelabrator Dust Collector s/n A180543150hp 460V main transfer fan, 20 HP 220/440V auxiliary1152 Bags 10’long, s/n A180543American Air Filters Dust Collector
size 1-306, 125hp transfer fan, 25hp transfer fan (to bin), 4rotary air locks, s/n AT240025Grecon Spark Detection Extinguishing Sys. (1998)
m/n CC704, 12-zone, s/n 2466
Presses Black Bros. Cold Press
38” x 102 ½” work area, (4) independent platens, 25 ½” 38”each, adjustable daylight opening to 26”, popup infeed/out-feed rollers, 60 minute timers on each platen, s/n 172623Evans 0256 62" Wide Pinch Roller
115V, s/n 565212
Saws Cut Off & MiterOmga V235 Double Miter Saw (2000)
14” blades, 5” x 99” table, pneu. stop, 3.6Kw 460V, s/n 2-921Whirlwind 212L Chop Saw (2000)
10HP, 3 phase, 230/460 volt motor, (1) 18” diameter cut-offblade, 2” x 12” capacity, foot pedal actuation, s/n 6580548LPistorius C Miter Chopper, s/n 75489
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
(5) Great Dane 48'Trailers
Ford L9000 Semi Tractor Stoughton Trailer 53’ (2000)
Ford E-350 Van
Amer. Air Filters Collector
Black Bros. Cold Press
Dust Star Collector (1990)
Pneumafil 13.5 Collector
Whirlwind 212L Saw Omga Double Miter Saw
10
2000
Qty. 5
20002000
On The Premises & SimultaneousWeb Cast!
Straight Line Rip SawDiehl 750 Straight Line Rip Saw, 24” throat, 80” x 63” table, 15hp 220/440V main motor, variable feed 60 to 180 f.p.m., shortstop electronic motor break, straightening fence, s/n 62-2765
ResawsHitachi CB100F Band Re-Saw w/ Feeder, 25 ½” x 3 ½” wheels,10hp 220/440V main motor, 29” x 32” tilting table, 16” underguide,Tyler power belt feed deck 10A 115V 5” wide belt, s/n 845011
Cut Off Saws
Copco 47A20 Hydracut, 5 HP (approx) s/n 860025
BandsawsTannewitz GH 36”, 5hp 220/440V, s/n 14896Tannewitz RHE 42", 7.5hp 220/440V, 36”x37” table, s/n 76060Oliver 116 36” 5hp, 440V, s/n 32704Powermatic 81 20”, 20" cap., 3-phase, s/n 8381045(4) Delta 28-245 14", ½hp, 115V, s/n 90E35875, 89651045, 86-B00943, 83K05343General 490 15”, s/n V4660 1/2hp, 115V, s/nAstro WB8-14 14", 115V, s/n 86017755
Table SawsTannewitz U Table Saw, 5hp 3500 RPM 220/440V, 14 amp total,s/n 12348Tannewitz XJ Table Saw with Feeder, 5hp 220/440V, 14 amptotal, 3,600 RPM, 4-roll HOLZ feeder, s/n 11162(3)Tannewitz J Table Saw, 5hp 220/440V (approx.), s/n 3756,2892(4) Delta 34-806 Unisaw, 5hp 220/440V, s/n 88F38435, s/n 42-6275, 89D18940Darra James Table Saw with Feeder, 2hp 220/440V, Nandina 3-Roll feederWards 64TDW227 Table Saw, Approx. 2hp 220/440V, s/n 912SC
Boring MachinesRitter R-813 Horizontal Borer (1995), 13-spindles, 2" centers,3hp 220/440V, (3) pneumatic hold-downs, foot pedal, 36”x12”table
Drill Presses Root GM Borer, 2hp 3,600/1,800 RPM, 460V s/n 8154Oliver 72D Drill Press, 2hp 220/440V, s/n 36101Oliver 72-D Drill Press, 2hp 440V, s/n 95492Delta Rockwell 15-665 15” Drill Press
3/4hp Single-phase, pneumatic drill movement, s/n 1491609
Routers
Onsrud A-1124 Pin Router, s/n 9182
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
www.irsAuctions.com 717.854.0316
Diehl 750 Straight Line Rip Saw
Powermatic 81 20” Tannewitz GH 36”
(4) Delta 28-245 14"
Tannewitz XJ Table Saw Tannewitz U Table Saw
Ritter R-813 Hor. Borer
Hitachi Resaw
(4) Delta Unisaws
11
On The Premises &Simultaneous Web Cast!
Qty. 4
Qty. 4
Qty. 5
Edge Sanders(2) Oakley H-5, Oscillating, (2) 9” x 52” platens, s/n 490133. 73-1/2" x 11" platen,s/n 4473R(2)Oakley H648, Oscillating, (2) 9” x 49” platens, 7.5hp 220/440V, s/n 3637, 3852Oakley H6 Oscillating, (2) 37”x7” platens, 5hp 220/440V, s/n 3363Ekstrom Carlson 112, Oscillating, 9” x 58” platen, 5hp 220/440V, s/n 112/329Wysong & Miles, Oscillating, two sided, 5hp 220/480V, 9” x 37” platensCrouch 60, 8” x 60” platen, 5hp 220/440V, s/n 081789(2) Powematic 013, 6-3/4” x 33-3/4” platen, 1-1/2”hp 115/230VIndiana, 10.5” x 42.5” platen, 5hp 220/440V
Drawer SandersOakley H-15, 14” wide belt, 5hp 220/440V motor, s/n 3107(4) Peerless, 3hp 220/440V, 14” wide belt, s/n 6470
Sanders Misc. State B4 Spindle Sander, 115V,Pearson Spl. Sand. Tilting, 1hp 220/440V, s/n 298AWysong & Miles Spindle Sander, 3/4hp 220/440V(3) Delta 31-730 Belt & Disc Sander, 115V Jet JSG-6DC Belt/Disc Sander, 1-1/2hp, 115/230V,Craftsman 113.225930 Belt/Disc Sander, 3/4hp, 115V (4) Powermatic 33 Vert. Belt Sander, 115V, 6” wide belt(2) Delta Vert. Belt Sander, 6” belt, 115V, Enco 163-4900 Vert. Belt Sander, 6” x 9” belt & disk(3) Delta 31-125, 12” Disc Sander, 1hp, 115/230VPorter Cable BG8 Vert. Belt Sander, 5hp 220/440V,9” wide belt, s/n 6076 3/4hp, 115V, s/n 100-7280
Planer & JointersPowermatic 100 Planer, 12” width capacity, 5” thick cap., 3hp 220/440V, s/n 8410221Delta 8" Jointer, 3-PhasePorter 6” Jointer, 1hp, 220/440V(2) Boice Crane 6" Jointer, 115V, 3/4hp
ShapersBaxter Whitney 139 Double, 30” centers, (2) 5hp 220/440V, s/n 12894, DeltaShaper, Feeder, s/n HC870Porter 203 Shaper w/ Feeder, 5hp 220/440V, 3,600 RPM, 3-Roll feeder, s/n 2309
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
Oakley H-5 Edgesander
Ekstrom Carlson Edgesander Powermatic 100 Planer
Oakley H648 Edgesander
Delta Belt & Disc SandersOakley H-15 Drawer Sander
Crouch Edgesander
Oakley H-5 Edgesander
12
On The Premises & Simultaneous
Web Cast!
Qty. 2
Qty. 2
Qty. 3
Qty. 2
ManipulatorsStrongarm / J&J Manufacturing Case Manipulator, 3 HP220/440V Rotation motor, 3 HP 220/440V Lift motor, 24” x 40”Jaws, 15” – 97” Opening, (2) Pneumatic Cylinders, s/n 001642Feeder/Stacker Pneu. Vacuum Lift, (8) Vacuum pods Manipulator w/Scissor Lift, 2000 lb. cap.
Pallet Jacks(11) H. Kallesoe KG1000 Airlift Pallet Jacks,1000kg max.,(11) Ergolift Electric Pallet jacks, (25) Manual Hyd. Pallet Jacks
Air Compressors & Dryers(3) Compair Kellogg 218 Hydrovane compressors, 50hp each,s/n 2HV59/309, n/a & n/aZeks 400H8FA400 Compressed Air Dryer, s/n 190780Air Compressor 340-33, 10hp, 230/460V, s/n 142876-LPioneer R40A Air Dryer, 115V, s/n 61923E5A17Compair Kellogg Compressed Air Dryer, s/n 190780Posizorb Oil/Water Separator
Large Air Tank
Pallet RackingPallet Racking, (55) sections1000+ Stackable Racks, 36” x 48” x 10” (majority)
Package EquipmentThermolok Packaging Systems Strapper, 39.5” x 42.25”Banding Area, ½” Banding, 480V, s/n0000140Speedy Packers SP3-6251 Foam Packing System (2000)
Viking Industries Titan Hot Melt Gluer
BailerSP Ind. VB-72-HD Bailer, 6' cap., wired 480V, s/n 92070276
Huge Quantity of Scissor Lifts(22) Southworth X-Lift, 2000 lb., (1) Southworth 4,000 Lb. X-
Lift, (4) American 2000 lb., X-Lift,
Maintenance LiftMEC 2033ES Maintenance Scissor Lift, 50# Capacity (2 per-sons), 32”x90” platform, 30”x32” platform extension, on-boardcharger
Sligh Furniture & Clocks ~ Holland, MI. October 27th 10am
www.irsAuctions.com 717.854.0316
(11) H. Kallesoe KG1000 Airlift Pallet Jacks
(11) Ergolift Electric Pallet jacks
Manipulator Strongarm
Compair 218 Compressors
Compair Air Dryer
Zeks Air Dyer
SP Industries Bailer Speedy Foam System
MEC 2033ES Maintenance X- LiftSample Views of (22) Southworth X-Lifts
13
Qty. 3
Qty. 22
Qty. 11
Qty. 11
1999
Maintenance Wilton 3300 Horizontal Metal Bandsaw, 1/3 hp single phase, s/n 864063, Abrasive Cut-off Saw, 5hp 220/440V 16” cutting wheelAtlas 4804 Metal Lathe, 36” between centers, 12” swing, 3/4 hp, s/n 150135,Bridgeport 96084 Vertical Milling Machine, 1hp 220/440V, s/n J-93453,12 Ton Hydraulic Press, Resolve Industries Parts Washer, Delta 20” Drill Press,
70-200, 1hp, 115/230V, s/n R9504, Hobart Handler 120 MIG Welder, Miller
Thunderbolt Welder, Wilton Metal Band Saw, 1/2hp, 1ph, Rigid 300 Pipe Threading
Machine, Miller Blue Star 2-E Arc Welder, Gas powered engine, Wilton Horiz. Metal
Bandsaw, 1/2hp, 115/230V, m/n 3230, s/n 877091
Misc. Support EquipmentPorter carver/sander, Ritter Shape master Jig, (8) Airflow Systems F70 Air
Cleaners, DTI 5000 Hopper Feed Screw Driver, (2) Delta 34-080 10” Miter Saw,
120V, s/n K8929, s/n 9124, Factory Cat Floor Sweeper, 12V DC System, Charger, 238Hours, s/n 34-11320, Self Dumping Hoppers, (5) Jesco self dumping hoppers,
Plastic Dump Hoppers, (25+ available), Cecor metal bins (27+ available) (3) Hytrol
Power (26) roller Sections.
General Miscellaneous Miscelleneous: Dandy scissor lift, dock lights, staple guns, nail guns, clamps (bar, pipe& spring), hammers, disc sanders, screw guns, air hose, squares, air blow offs, wrench-es, wood clamps, belt sanders, parts bins, fans, trash cans vertical inspection lights, sta-ples, (4) clamp tables, ultra max sprayer, etc.(50) Lineberry factory carts.
Real Estate Prime Real Estate in Holland, MI.
Building has beautiful offices. It haslarge manufacturing and warehous-ing areas. There is plenty of dockdoor access and it is located close tomajor interstates.
Total Sq. Ft.: 224,200 Mfg. & Warehouse Sq. Ft. 213,200Office Sq. Ft. 11,000Address: 1201 Industrial Ave.,Holland MI. 49423, Allegan County,Acreage: 19.72 Proximity: US 31 1 mile, Interstate196 1.3 miles.Zoning: 1-2Sprinkler System: 100%Availability: 1-1-2006
For more informatioin please contactus at 717-849-5042
Slligh Furniture & Clocks ~ Holland, MI. October 27th 10am
Sale On Premises With Simultaneous Web Cast! www.irsAuctions.com
Bridgeport Vertical Mill
Jesco Self Dump Hoppers
Rigid 300 Pipe Threader
14
Real Estate Available by Private Negotiation!
Qty. 5
TERMS OF SALEREGISTRATION & DEPOSIT:A minimum, refundable deposit of $200.00 paid in cash or check will be mandatory in orderto receive a bidder's paddle. All checks (blank or otherwise) must be made payable toIndustrial Recovery Services Inc. and accompanied by a Bank Letter of Guarantee. A depositof 25% must be maintained throughout the sale. All purchases must be paid for at the end ofeach auction day. No lots will be removed until payment is made in full. NO EXCEPTIONS!All purchases are subject to MI. State Sales Tax. If you are exempt, you must provide prop-er exemption documents.
PAYMENT:Only Cash, Certified or Cashier’s check payable to Industrial Recovery Services will beaccepted. Company or Personal Checks (blank or otherwise) payable to “Industrial RecoveryServices” will be accepted only if accompanied by a Bank Letter of Guarantee made payableto the auctioneer showing a statement of limits and dated for the day of the sale. Your BankLetter of Guarantee must be good for 10 days beyond sale dates & should be similar to thefollowing:
Mr. “Customer’s Name” on account #____is a customer of this bank. This bank will guaran-tee unqualified payment to Industrial Recovery Services, Inc. up to the amount of $____. Thisletter is for purchases made at the Sligh Auction being held on October 27th, 2005, inHolland, MI. This letter is valid until November 7th, 2005.
Payments made by wire transfer will be only be accepted if arrangements have been made(2) days prior to the auction with our auction office.
BUYER’S PREMIUM:A 10% Buyer’s Premium will be applied to all on-location purchases.
A 13% Buyer’s Premium will be applied to all Web-Cast purchases.
ABSENTEE BIDDING:If you have a problem attending the auction and would like the auctioneer to bid on youbehalf, please call and ask us to explain our proxy bidding process. All proxy bids must bereceived two days prior to the auction and accompanied by a 25% deposit. The above men-tioned standard 10% Buyer’s Premium will be applied to all absentee purchases.
INTERNET BIDDING / WEB-CAST:Simultaneous, real-time Internet bidding will be available on major equipment. Please contactour office (no less then three days prior to the auction) to set up your web-cast account. A13% Buyer’s Premium will be added to all Web-Cast purchases. Web-Cast participation willbe for large items only. Visit us at www.irsAuctions.com for details on internet bidding.
IMPORTANT NOTICE:The Buyer acknowledges that he/she or an agent has inspected all the assets upon whichhe/she will be bidding on and/or does purchase. Buyer agrees to accept assets purchased“as is”, “where is”, “in place”, and “with all faults”. The Buyer expressively waives any claimin respect to any possible future use of any asset purchased for any purposes whatsoever.The Buyer does hereby assume and does agree to indemnify, defend and hold the Auctioneerand Seller harmless for any future claim which shall pertain to the fitness, merchantability,suitability for any particular purpose, or use of that asset as being purchased. Neither theAuctioneer nor the Seller assumes any liability for errors, omissions and/or accuracy in thislisting. All assets will be offered subject to prior sale. Everything will be offered to the highestbidder for cash in accordance with the Auctioneer’s customary “Terms of Sale”, copies ofwhich will be posted on the premises. Sale subject to other terms announced the day of thesale.
Sorry, but due to insurance reasons & disruption of the sale, there will be no removalof any large non-hand carriable items during the day of the auction!
PLEASE FORWARD TO
MACHINERY BUYER
RETURN SERVICE REQUESTED
INDUSTRIAL RECOVERY SERVICES
P.O. Box 5086 • York, PA 17405
®
AUCTION
Residence Inn 631 Southpointe Ridge Rd
Holland, MI 49423
Hampton Inn12427 Felch St
Holland, MI 49424
Fairfield Inn2854 W Shore Dr Holland, MI 49424
616-786-9700
Accommodations:
Furniture & ClocksHolland, MI. Mfg. Facility
Thurs. Oct. 27th 10:00am Preview: Wednesday, October, 26th 9am-4pm
1201 Industrial Ave., Holland, MI.
DIRECTIONS: From Grand Rapids Airport: Turn left from Airport enter-ance to M-6 west. Follow M-6 to merge with Interstate 196west to Holland. Take exit 49 (M-40) north (right). Follow leftcurve, factory on right.
From South Central: From south central take US 131 northto M-6 west. Follow M-6 to merge with Interstate 196 west toHolland. Take exit 49 (M-40) north (right) north. Follow leftcurve, factory on right.
From South West (Chicago): Take Interstate 96 east toInterstate 196 east. Follow Interstate 196 towards GrandRapids. Take exit 49 (M-40) north (left). Follow left curve, fac-tory on right.
616-393-6900616-399-8500