'12 RME17 partsbook with TLR and NEW OMNI 251221 - BW 5951...

2012 RME-17

2012

2

2012 RME-17

PARTSBOOK

This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at any time without notice or obligation. Additional copies of the manuals are available from your local Bush-Whacker dealer.

Hall Manufacturing, Inc. 3706 East Washington P.O. Box Drawer 5638

North Little Rock, AR 72119 (501) 945-7550

Always use genuine Bush-Whacker replacement parts, available through the network of authorized dealers. Explanation of the terms in the Partsbook Ref. No.—Refers to the numbered parts in illustration Part No.—Refers to the part number of the part. This is what you use when ordering new parts

as well as description and quantity. Description—Gives the description of the part Qty—Quantity listed for each component on the illustration, not the total quantity of that part

used on the entire machine. Remarks—any comments (refers to detail pages of parts, etc.)

RME-17 ASSEMBLY BREAKDOWN

Ref. No. Description Page Number

1 Mower Deck Assembly 4

2 Dipper Boom Assembly 10

3 Primary Boom Assembly 12

4 Swivel Frame Assembly 18

5 3 Point Hitch Assembly 20

6 Hydraulic Tank Assembly 28

7 Drive Shaft Assembly 24

N/A Electrical System Components 26

N/A Safety Decals 15 in Safety & Operation Manual

041022

3

2012 RME-17

RME-17 Assembly Breakdown

041022

4

2012 RME-17

Mower Deck Assembly

041022

5

2012 RME-17

Mower Deck Assembly

Parts List

Ref. No. Part No. Description Qty Remarks

1 2105 Nut 2

2 2106 Washer 2

3 4329 Blade 2

4 3095 Blade Bolt 2

5 1422 Cotter Pin 1

6 1421 Castle Nut 1

7 5950 Rotor bar 1

8 4149 Rubber Spacer 12

9 4150 Guard Retainer 6

10 2336 Nut 34

11 2335 Bolt 38

12 4151 Rubber Guard 6

13 4152 Hydraulic Hose 1

14 4153 Bolt 8

15 2727 Lock Washer 8

16 4154 Flange Half 4

17 4155 O-Ring 2

18 4156 Fitting 1



21 4159 Bolt 2

22 2513 Nut 2

23 4330 Hydraulic Motor 1 See page 8 for details

24 3147 Bolt 4

25 4354 Nut 4

26 4160 Mower Deck Assembly 1

27 2513 Nut 2

28 3415 Washer 2

29 3083 Access Cover 1

30 4161 Skid Shoe 2

31 3148 Nut 4

32 2337 Washer 4


34 5951 Overhung Load Adapter 1 See page 6 for details

041022

6

2012 RME-17

Overhung Load Adapter

041022

1

2

3

8

9

10

11

4

5

6

7

12

13

14

7

2012 RME-17

Overhung Load Adapter Parts List


5951 Complete Overhung Adapter Assembly 1

1 5960 Housing 1

2 5959 Shaft 1

3 5215 Bearing Cup 1

4 5216 Bearing Cone 1

5 5958 Washer with tang 1

6 4172 Lock washer 1

7 5957 Lock nut 1

8 5956 Set screw 2

9 5955 Lip seal output 1

10 5954 Seal protector 2

11 5950 Blade Hub 1 REF. ONLY Part of Rotor bar assembly 5952

12 1421 Castle nut 1

13 5706 Cotter pin 1

14 4173 Plug 2

041022

8

2012 RME-17

Hydraulic Motor

041022

9

2012 RME-17

Hydraulic Motor Parts List


4330 Complete Motor Assembly 1

1 4331 Shaft Bearing Snap Ring 1

2 4332 Input Shaft Bearing 1

3 4333 Seal Retainer 1

4 4334 Lip Seal 1

5 4335 Motor Mount 1

6 4336 Check Valve 2

7 4337 Shaft Bushing 4

8 4338 Thrust Plate 2

9 4342 Shaft and Gear 1

10 4343 Housing Gasket 2

11 4344 Housing Dowell Pin 4

12 4345 Gear Housing 1

13 4346 PEC 1

14 4347 Bolt 4

15 3718 Washer 4

16 4348 Nut 4

Not Shown 4339 Nylon Backup Seal 2

Not Shown 4340 Thrust Plate Side Seal 4

Not Shown 4341 Thrust Plate End Seal 4

041022

10

2012 RME-17

Dipper Boom Assembly

041022

11

2012 RME-17

Dipper Boom Assembly

Parts List

Ref. No. Part No. Description Qty Remarks 1 4176 Linkage 1

2 4178 Pin 2

3 4179 Pin 2

4 4159 Bolt 7

5 2513 Nut 7

6 4180 Linkage 2

7 4181 Dipper Boom Arm 1

8 4183 Pin 1

9 4184 Bolt 1

10 4185 Mower Deck Cylinder 1 See page 15 for details


12 4195 Pin 1

13 4201 90° Fitting 2

14 4196 Hose Clamp 2



17 4199 Shield 1

18 2342 Washer 2

19 4260 Nut 2

20 3220 Nut 2

21 4350 All-thread Rod 2


041022

12

2012 RME-17

Primary Boom Assembly

041022

13

2012 RME-17

Primary Boom Assembly

Parts List


1 4203 Primary Boom Arm Assembly 1

2 4183 Pin 1

3 4184 Bolt 2

4 2513 Nut 6

5 4227 Boom cylinder 2 See page 16 for details

6 4205 Main cylinder 1 See page 17 for details

7 4213 Pin 1

8 4214 Bolt 3

9 2513 Nut 1

10 4184 Bolt 1

11 4216 Pin 1





16 4201 90° Fitting 4

17 4219 Pin 1

18 4349 All thread Rod 2

19 3220 Nut 2

20 4224 Pin 1

21 4225 Pin 1




25 4221 Shield 1

26 2342 Washer 2

27 4260 Nut 2

041022

14

2012 RME-17

Mower Deck Cylinder


4185 Complete Cylinder Assembly 1

1 5345 Cylinder 1

2 5334 Nut 1

3 5340 Cylinder Head 1

4 5346 Cylinder Rod 1


6 5344 Grease Zert 2

7 5338 Seal Wiper Rod 1

8 5335 Seal Hallite 1

9 5337 “O” Ring 1

10 5336 Seal 1

11 5339 Wear Ring 1

041022

15

2012 RME-17

Dipper Cylinder



1 5353 Cylinder 1

2 5355 Nut 1

3 5352 Piston 1




7 5346 Sealo Hallite 1

8 5348 “O” Ring 1

9 5347 Seal Piston Ring 1

10 5350 Wear Rintg 1


041022

16

2012 RME-17

Primary Cylinder



1 5356 Nut 1

2 5364 Piston 1

3 5362 Stop Tube 1

4 5365 Cylinder 1





9 5357 Seal Hallite 1

10 5359 “O” Ring 1


12 5361 Wear Ring 1

041022

17

2012 RME-17

Swivel Cylinder



1 5340 Piston 1

2 5342 Cylinder 1




6 5335 Seal Halllite 1

7 5337 “O” Ring 1


9 5339 Wear Ring 1

10 5334 Nut 1

041022

18

2012 RME-17

Swivel Frame Assembly

041022

19

2012 RME-17

Swivel Frame Assembly Parts List


1 4239 Swivel Frame Assembly 1

2 2513 Nut 4

3 4236 Pin 2

4 4214 Bolt 6

5 4216 Pin 1

6 4238 Jack Stand 1

7 4240 Swivel Cylinder 1 See page 17 for details

8 4219 Pin 1

9 2313 Cotter Pin 2

10 4248 Pin 2



13 4201 90° Fitting 2

041022

20

2012 RME-17

3 Point Hitch Assembly

041022

21

2012 RME-17

1 4251 3 Point Hitch Assembly 1 2 5586 Thrust Bearing 4 3 2513 Nut 1 4 4236 Pin 2 5 4214 Bolt 2 6 3715 Hitch Pin 2 7 4252 Clip Pin/Hair Pin 2 8 4253 Top Link Pin 3 9 4328 Bolt 1

10 2638 Nut 1 11 4326 Top Link 3 12 C112 Lynch Pin 3 13 4254 Bolt 4 14 4255 Lock Washer 4 15 3285 Washer 10 16 106 Bolt 5 17 107 Nut 5 18 5590 Programmable Controller 1 19 5580 90° Fitting 2 20 5581 Reducer 1 21 4259 Heat Exchanger 1 22 4260 Nut 4 23 4261 Hydraulic Hose 1 24 4256 Bolt 4 25 2733 Lock Washer 4 26 4262 Shield 1 27 2733 Lock Washer 4 28 4263 Hydraulic Hose 1 29 4264 Fitting 1 30 4265 Shield 1 31 2513 Nut 12 32 4266 Bolt 12 33 2727 Lock Washer 4 34 4153 Bolt 4 35 4267 Hydraulic Hose 1 36 4268 Half Flange 2 37 4269 O-Ring 1 38 4368 Pump 1 39 4290 Snap Ring 1 40 4289 Coupler 1 41 4271 Speed Increaser 1 See page 22 for details 42 2579 Washer 2 43 2734 Bolt 2 44 4270 Fitting 1 45 4292 Hydraulic Hose 1 46 4293 Hydraulic Hose 2 47 2734 Bolt 4 48 4294 Flange Half 2 49 4295 O-Ring 1

3 Point Hitch Assembly

Parts List

041022

22

2012 RME-17

Speed Increaser

041022

23

2012 RME-17

Speed Increaser Parts List


4271 Complete Speed Increaser

1 4272 Housing 1

2 4273 Cap 1

3 4274 Gear 1

4 4275 Pinion 1

5 4276 Shaft 1

6 4277 Bearing 2

7 4278 Bearing 2

8 4279 Seal 1

9 4280 Seal 1

10 4281 Key 1

11 4282 Spacer 1

12 4283 Dowel Pin 2

13 4284 Capscrew 8


15 4286 O-Ring 4

16 4287 Flange Plug 3

17 4288 Shaft Plug 1

18 4289 Coupler 1

19 4290 Snap Ring 1

20 4291 Flange Plug 1

041022

24

2012 RME-17

540 RPM Drive Shaft

041022

25

2012 RME-17

540 RPM Drive Shaft

Parts List


4358 Complete Drive Shaft Assembly 1

1 3939 Slide Collar Yoke 2

2 3940 Slide Collar Kit 2

3 3941 Cross Kit 2

4 3917 Grease Fitting 2

5 3942 Outer Tube Yoke 1

6 3919 Outer Roll Pin 1

7 4359 Outer Tube (Steel) 1

8 4360 Inner Tube (Steel) 1

9 3922 Inner Roll Pin 1

10 3945 Inner Tube Yoke 1

13 3947 Shield Bell 2

14 3927 Outer Shield Ring 1

15 3928 Shield Screw 6

16 4361 Outer Shield Tube 1

17 4362 Inner Shield Tube 1

18 3950 Shield Safety Chain 2

19 3932 Inner Shield Ring 1

20 4363 Outer Half Shield Complete 1

21 4364 Inner Half Shield Complete 1

22 4365 Complete Shield Assembly 1

23 4366 Outer Half Shaft Complete 1

24 4367 Inner Half Shaft Complete 1

041022

26

2012 RME-17

Electrical System Components

041022

SWING White

DECK TILT Yellow

DIPPER BOOM Purple

MAIN BOOM Green

MOTOR Blue

27

2012 RME-17

Electrical System Components

Parts List

`Ref. No. Part No. Description Qty Remarks

1 5588 Cable harness 1

2 5590 Programmable controller 1 Reference

3 4259 Heat exchanger 1 Reference

4 4427 Thermostat assembly 1

5 5589 Joystick & Control box 1

6 5330 Complete valve assembly 1

7 Power cable 1

041022

28

2012 RME-17

Hydraulic Tank Assembly

041022

29

2012 RME-17

Hydraulic Tank Assembly Parts List


5 4300 Hydraulic Tank 1

6 4301 Drain Plug 1

7 4302 Suction Strainer 1

8 4303 Fitting 1

9 4304 Bolt 4


11 5330 Complete Valve Assembly 1

12 4306 Fitting 8

13 4256 Bolt 3

14 2332 Washer 3

15 4307 Shield 1

16 4308 Fitting 2

17 4309 Fitting 2

18 4310 Fitting 1

19 4311 Tee 1

20 4312 Fitting 1

21 4313 Complete Filter Assembly 1

22 4314 Filter 1

23 4315 Seal 1

24 4316 Filter Top 1

25 4317 Filter Pressure Gauge 1

26 4352 Adapter 1

27 4351 Bolt 12

28 4318 Tank Cover 1

29 4319 Complete Filler/Breather Assembly 1

30 4320 Self Tapping Screw 6

31 4321 Cover 1

32 4322 Filler Top 1

33 4323 Seal 2

34 4324 Strainer Basket 1

35 4325 Seal 1

36 4238 Jack Stand 2

37 4370 Complete Lever Assembly 5

38 4371 Lever 5

39 4372 Base 5

40 4373 Washer 5

41 4374 Screw 5

1 4296 Complete Temperature/Level Gauge 1

2 4297 Temperature/Level Gauge 1

3 4298 O-Ring 2

4 4299 Nut 2

041022

30

2012 RME-17

Top Link Reinforcement kit


1 4989 Bolt 2

2 2638 Lock Nut 2

3 4868 Reinforcement plate 2 The holes are not drill or center punched

4 4869 Reinforcement bushing 2

5 4326 Top Link 3

6 - The Tractor Top link Mount This is different for every tractor

7 2106 Washer 4

31

2012 RME-17

HALL MANUFACTURING WARRANTY POLICY FOR BUSH-WHACKER ROTARY MOWERS

NEW EQUIPMENT WARRANTY Subject to limitations and exclusions set forth herein, Hall Manufacturing Inc. warrants that if any component or

part of a machine manufactured by Hall Manufacturing, excluding any mechanical gearbox or mechanical gearbox component used by Hall Manufacturing, proves to be defective in material or workmanship within one (1) year from the delivery date of the original sale to the end user, Hall Manufacturing will, at its option, either repair or replace the defective part without charge. In addition, Hall Manufacturing warrants that if any me-chanical gearbox or mechanical gearbox component used by Hall Manufacturing on any Bush-Whacker rotary mower proves to be defective in material or workmanship within three (3) years from the delivery date of the original sale, Hall Manufacturing will, at its option, either repair or replace the defective mechanical gearbox or gearbox part without charge, except for rotary mowers sold directly to a state or related governmental agencies for which the mechanical gearbox or mechanical gearbox component warranty period is limited to one (1) year from the delivery date of the original sale. No payment will be made in lieu of repair of the machine.

LIMITATIONS AND EXCLUSIONS If the equipment is used for rental the warranty period is ninety (90) days from the date of sale to the renter. This

includes all mechanical gearboxes and their components. This limited warranty covers defects in materials and workmanship in the parts manufactured or used by Hall Manufacturing excluding: Damage resulting from accident, abuse, misuse, neglect or other than normal and ordinary use of the

equipment. Damage resulting from failure to use the product in accordance with the manufacturer’s instructions.

Refer to the appropriate owner’s manual for the Bush-Whacker mower model you purchased. Hall Manufacturing shall be released from all obligations and liabilities under this warranty if: The equipment had been operated with any accessory, equipment, component or part not manufactured by

Hall Manufacturing or approved for use by Hall Manufacturing. The equipment has been repaired, altered or modified without Hall Manufacturing’s approval or if the

equipment shall have been operated subsequent to its involvement in an accident or breakdown un-less the Owner furnishes reasonable evidence that such repair, alteration, modification or operation subsequent to its involvement in an accident or breakdown was not a cause of the defect.

The Owner does not return, at Owner expense, the defective accessory, equipment component or machine to, or notify, an authorized Bush-Whacker dealer. The Owner shall be responsible for submission of reasonable evidence of proof of Date Discovery of said defect.

REPLACEMENT PARTS WARRANTY AND PARTS REPLACED BY WARRANTY

Hall Manufacturing further warrants that if any genuine Bush-Whacker part or component utilized by an authorized Bush-Whacker dealer proves to be defective in material or workmanship, within thirty (30) days of such utili-zation, Hall Manufacturing will, at its option, repair or replace the defective part without charge. Owner shall be responsible for all freight charges including labor to and from the place where the warranty work is per-formed.

WHAT YOU MUST DO TO ENFORCE THIS WARRANTY

Warranty services must be performed or approved by an authorized Bush-Whacker Dealer. The Owner must, at the Owner’s expense, deliver, mail or ship the defective product together with the original Bill of Sale to any Au-thorized Dealer in the Owner’s area.

Owner must pay any postage, shipping charges, insurance costs, freight and other expenses to and from the place where the warranty work is performed. If required to return equipment or any component or part to an author-ized Bush-Whacker Dealer, Owner shall be obligated to pay any premium payable for overtime labor if over-time is incurred as a result or a request by the Owner.

UNAPPROVED SERVICE OR MODIFICATION

All obligations of Hall Manufacturing under this warranty shall be terminated if: Service is performed by someone other than a Dealer authorized by Hall Manufacturing Equipment is modified or altered in ways not approved by Hall Manufacturing.

ACCIDENTS AND NORMAL MAINTENANCE

This warranty covers only defective materials and workmanship. It does not cover depreciation or damage caused by normal wear, accident, improper maintenance, improper protection in storage or improper use. The cost of normal maintenance and replacement of service items such as: cutting parts, drive line cross kits and clutch pads, skid shoes, gearbox and drive line shields, tires, bearings, seals, chains, etc. shall be paid for by the Owner.

32

2012 RME-17

041022

DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Hall Manufacturing’s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties, Implied or expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to the sale or use of the equipment warranted. Such incidental and consequential damages shall include but not limited to: transportation charges loss of income; rental of substitute equipment, and expenses due to loss, damage, detention or delay in the deliv-ery of equipment or parts resulting from acts beyond the control of Hall Manufacturing.

IMPROVEMENTS OR CHANGES Hall Manufacturing reserves the right to make improvements of changes in design and specification at any time without incurring any obligation to owners of units previously sold.

WARRANTY CLAIMS PROCEDURE Warranty claims must be delivered to Hall Manufacturing within thirty (30) days after the warranty service work was performed.

Hall Manufacturing will approved or deny claim within thirty (30) days of receiving a claim. Hall Manufacturing will issue credit for all genuine Bush-Whacker parts or components as well as all approved

Dealership employee labor time at a rate of $30.00 per hour within thirty (30) days of the claim approval. Defective parts must be held for inspection for ninety (90) days after the work is performed. Hall Manufacturing

may request that parts be returned to the Hall Manufacturing factory for inspection.

ACKNOWLEDGEMENT REQUIRED Hall Manufacturing shall have no obligation under this warranty unless the Owner Registration Card, included with your Operators Manual, is signed by Owner and Dealer or Dealer’s Agent and is delivered along with a copy of the original Bill of Sale from the Dealer to Hall Manufacturing within sixty (60) days from the date of sale.

─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─

COMPLETE THE WARRANTY REGISTRATION CARD

(ON THE FOLLOWING PAGE)

PLACE IN AN ENVELOPE ALONG WITH THE ORIGINAL BILL OF SALE

MAIL TO:

HALL MANUFACTURING, INC. P. O. BOX 5638

NORTH LITTLE ROCK, AR 72119

33

2012 RME-17

041022

WARRANTY REGISTRATION ** Return to Hall Manufacturing within sixty (60) days of purchase Date of Purchase ___________ Purchaser _____________________________ Address __________________ City_____________________ State ________ Product ___________________ Model#___________ Serial#_____________ Dealer Address City State Signature of Original Buyer Signature of Dealer or Dealer’s Agent * Please include a copy of the original bill of sale

34

2012 RME-17

Notes

35

2012 RME-17

Notes

36

2012 RME-17

'12 RME17 partsbook with TLR and NEW OMNI 251221 - BW 5951...

Documents

Transcript of '12 RME17 partsbook with TLR and NEW OMNI 251221 - BW 5951...