Sales, Service and HVAC System Design

Training Materials for self-study and presentations

HVAC Controls System DesignSystem DesignServiceService

www.training.carrier.com

Form No. CTT-01B Cat. No. 06-020-315

echnical raining Catalog

General Training - Theory GTAC1 Air Conditioning (Fundamentals) __________________ 1 GTAC2 Air Conditioning (Advanced ______________________ 2 GTE Electricity (Fundamentals) _________________________ 3 GTH Heating________________________________________ 4 Computer Based Training______________________________ 5 Servicing Skills Service Six Pack 1 & 2 ________________________________ 6 Skills Programs______________________________________ 7 HVAC Procedures Handbooks __________________________ 7 Economizers & Troubleshooting Series ___________________ 8 Product Service Training Carrier Residential 38 Series Split System Condensing Units & Heat Pumps __ 9 58 Series Gas Furnaces____________________________ 9 61 Series Boilers _________________________________ 9 Zoned Products __________________________________ 9 Commercial & Applied 16 Series Absorption Chillers _____________________ 10 17/19 Series Centrifugal Liquid Chillers _______________ 10 23 Series Screw Chillers _________________________ 11 30 Series Packaged Reciprocating Liquid Chillers_______ 11 33 Series Control Systems _______________________ 12 35/45, 37 Air Terminals/40 Series Unit Ventilators_______ 12 39L Series Central Station Air Handling Units __________ 12 48/50 Series Rooftop Units_________________________ 12 50 Series Water Source Heat Pumps_________________ 13 53 Series Duct-Free Systems _____________________ 13 Bryant Gas Furnaces ___________________________________ 14 Boilers_________________________________________ 14 Zoned Products _________________________________ 14 Split System Air Conditioning & Heat Pumps ___________ 14 Packaged Air Conditioning & Heat Pumps _____________ 15 Servicing Compressors _______________________________ 16

Miscellaneous Service Training Standard Service Techniques _______________________17 Safety Training___________________________________17 Cooling_________________________________________17 Heating ________________________________________18 Controls ________________________________________18 Award Certificates ________________________________18 Other Tools, Rules, Pocket Cards, etc. ________________18 Professional Development__________________________19 Design Training Technical Development Programs Introduction to HVAC ______________________________20 Pyschrometrics __________________________________20 Load Estimating __________________________________20 Refrigeration Cycle _______________________________21 Distribution Systems ______________________________21 Commercial HVAC Equipment Air Handling Equipment ____________________________21 Chillers_________________________________________22 Packaged Units __________________________________22 Other Equipment _________________________________22 Commercial Controls ______________________________23 Commercial HVAC Applications _________________________23 TDP Sampler ________________________________________23 Older Programs ______________________________________24 Residential __________________________________________25 Carrier System Design Manual __________________________26 Process Refrigeration _________________________________26 Engineering Guides ___________________________________27 Engineering Charts, Forms and Tools_____________________28 Engineering Software _________________________________29 Metric Versions ______________________________________30 Ordering Information __________________________________32 Order Form _________________________________________33

TABLE OF CONTENTS

TRAINING MATERIALS

1

GTAC-1 Air Conditioning (Fundamentals) Introduction to Air Conditioning (GTAC1-1) A basic introduction assuming no previous knowledge of the subject matter. Explains HVAC terminology and basic concepts. Book Only (GTAC1-101)..............................................................022-001.................6.25 CD-ROM PPT with Audio (GTAC1-1CD)...................................022-040.............. 93.75 Video Only (GTAC1-1V)...............................................................022-060............ 100.00 Temperature/Pressure (GTAC1-2) Covers heat and temperature/pressure relationships. Book Only (GTAC1-102)..............................................................022-003.................6.25 CD-ROM PPT with Audio (GTAC1-2CD)...................................022-041.............. 93.75 Video Only (GTAC1-2V)...............................................................022-051..................100 The Refrigeration Cycle (GTAC1-3) Introduces the function of major components and shows how these components work together to constitute the refrigeration system. Book Only GTAC1-103) ...............................................................022-005.................6.25 CD-ROM PPT with Audio (GTAC1-3CD)...................................022-042.............. 93.75 Video Only (GTAC1-3V)...............................................................022-052............ 100.00 Systems (GTAC1-4) Describes various types of systems along with the compressor/condenser and evapo-rator curves. Book Only (GTAC1-104)..............................................................022-007.................6.25 CD-ROM PPT with Audio (GTAC1-4CD)...................................022-043.............. 93.75 Video Only (GTAC1-4V)...............................................................022-053............ 100.00 Compressors (GTAC1-5) Basic types of compressors are introduced, stressing their construction, function, and capacity. Book Only (GTAC1-105)..............................................................022-009.................6.25 CD-ROM PPT with Audio (GTAC1-5CD)...................................022-044.............. 93.75 Video Only (GTAC1-5V)...............................................................022-054............ 100.00 Condensers (GTAC1-6) Covers operation of condensers within the refrigeration system, condenser capacity and how condenser problems relate to system troubleshooting. Book Only (GTAC1-106)..............................................................022-011.................6.25 CD-ROM PPT with Audio (GTAC1-6CD)...................................022-045.............. 93.75 Video Only (GTAC1-6CD)............................................................022-055............ 100.00

Evaporators (GTAC1-7) Basic evaporation process is studied. Particular attention is devoted to the processs relationship to the PH chart. Book Only (GTAC1-107) ..............................................................022-013.................6.25 CD-ROM PPT with Audio (GTAC1-7CD)...................................022-046.............. 93.75 Video Only (GTAC1-7V)...............................................................022-056............ 100.00 Metering Devices (GTAC1-8) Covers the specifics of modulating and fixed orifice control. Shows the expansion process and superheat control within the refrigeration cycle. Book Only (GTAC1-108) ..............................................................022-015.................6.25 CD-ROM PPT with Audio (GTAC1-8CD)...................................022-047.............. 93.75 Video Only (GTAC1-8V)...............................................................022-057............ 100.00 Electrical & Refrigerant Controls (GTAC1-9) Introduces the operation and function of basic switches and loads in control and power circuits. Refrigerant controls are also covered. Book Only (GTAC1-109) ..............................................................022-017.................6.25 CD-ROM PPT with Audio (GTAC1-9CD)...................................022-048.............. 93.75 Video Only (GTAC1-9V)...............................................................022-058............ 100.00 Accessories (GTAC1-10) System options and factory-installed components are studied. Benefits of these options in terms of enhanced system operation, ease of installation and servicing, and user convenience is stressed. Book Only (GTAC1-110) ..............................................................022-019.................6.25 CD-ROM PPT with Audio (GTAC1-10CD).................................022-049.............. 93.75 Video Only (GTAC1-10V).............................................................022-059............ 100.00 GTAC-1 Book Assembly of one each of the GTAC-1 books listed here, Modules 1 through 10. Book (GTAC1-BK) ........................................................................022-025.............. 56.25 GTAC-1 Independent Study Program This self (home study) Comprehensive Course allows students to learn at their own pace. Order Text Book (022-025) and Test. Test only Includes: Registration Card, Course Description Brochure, Mid-Term and Final Exams with (2) Postage Paid Envelopes. East to Self-Administer You study books and take exams at intervals described. Then mail to us. We grade exams and return marks with fully explained remedial answers to questions answered incorrectly. Success is recognized Award certificate and transcript of test scores are sent to students who achieve an average test score of 70% or above. Test Only (GTAC1-ISP)................................................................022-027............ 125.00 Bundle of 10 CD-ROM Presentations (PowerPoint) Contains one each of the GTAC-1 CD-ROM presentations listed here, Modules 1 through 10. Set of 10 CD-ROMs (GTAC1-CD)..............................................022-024............ 812.50 Bundle of 10 Videos Contains one each of the GTAC-1 videos listed here, Modules 1 through 10. Set of 10 Videos (GTAC1-V)........................................................022-023............ 750.00

THEORY

TRAINING MATERIALS

2

GTAC-2 Air Conditioning (Advanced) Refrigerant Characteristics (GTAC2-1A) Presents types, characteristics, and oil compatibility of pure refrigerants, azeotropes, and zeotrope blends. It focuses on proper application and safe handling for new, replacement refrigerants used in air conditioning and refrigeration systems. Book Only (GTAC2-101A)........................................................... 022-131 ................6.25 CD-ROM PPT with Audio (GTAC2-1CD) .................................. 022-080 ..............93.75 Video Only (GTAC2-1V) .............................................................. 022-090 ............100.00 Refrigerant Oils (GTAC2-2A) Covers oils used in air conditioning systems and how they are properly applied. In-cludes compatibility with new, replacement refrigerants and changeout procedures. Book Only (GTAC2-102A)........................................................... 022-133 ................6.25 CD-ROM PPT with Audio (GTAC2-2CD) .................................. 022-081 ..............93.75 Video Only (GTAC2-2V) .............................................................. 022-091 ............100.00 Refrigerant Piping (GTAC2-3) Familiarizes you with enough detail to spot and modify obvious field piping errors. Topics covered are piping requirements, sizing, insulation, and support and piping loops. Book Only (GTAC2-103A)........................................................... 022-105 ................6.25 CD-ROM PPT with Audio (GTAC2-3CD) .................................. 022-082 ..............93.75 Video Only (GTAC2-3V) .............................................................. 022-092 ............100.00 System Dehydration (GTAC2-4) Studies moisture problems and their effect on air conditioning systems, and the importance of moisture elimination during evacuation. Book Only (GTAC2-104).............................................................. 022-107 ................6.25 CD-ROM PPT with Audio (GTAC2-4CD) .................................. 022-083 ..............93.75 Video Only (GTAC2-4V) .............................................................. 022-093 ............100.00 Charging, Recovery, Recycling and Reclamation (GTAC2-5A) Trains you to charge, recover and recycle traditional and replacement halocarbon refrigerants. It also focuses on tools and equipment used. Book Only (GTAC2-105A)........................................................... 022-139 ................6.25 CD-ROM PPT with Audio (GTAC2-5CD) .................................. 022-084 ..............93.75 Video Only (GTAC2-5V) .............................................................. 022-094 ............100.00 Installation Procedures (GTAC2-6) All facets of installation are covered including planning, piping, brazing, wiring, pump down, prestart checks, and start-up and safety essentials. Book Only (GTAC2-106).............................................................. 022-111 ................6.25 CD-ROM PPT with Audio (GTAC2-6CD) .................................. 022-085 ..............93.75 Video Only (GTAC2-6V) .............................................................. 022-095 ............100.00

Heat Pumps (GTAC2-7) Covers the overall concept of the heat pump, its operation, benefits and disadvan-tages, operating economics, servicing concerns and how water-source heat pumps are used for heat reclaim in commercial buildings. Book Only (GTAC2-107).............................................................. 022-113 ................6.25 CD-ROM PPT with Audio (GTAC2-7CD) .................................. 022-086 ..............93.75 Video Only (GTAC2-7V) .............................................................. 022-096 ............100.00 Part Load (GTAC2-8) Operating problems often show up at part load rather than at full capacity. These are the problems on which this module focuses, especially concentrating on the refrigera-tion cycle. Book Only (GTAC2-108).............................................................. 022-115 ................6.25 CD-ROM PPT with Audio (GTAC2-8CD) .................................. 022-087 ..............93.75 Video Only (GTAC2-8V) .............................................................. 022-097 ............100.00 Troubleshooting (GTAC2-9) Introduces basic refrigeration system troubleshooting. Study diagnostic tools along with troubleshooting, logic, information, and charts. Book Only (GTAC2-109).............................................................. 022-117 ................6.25 CD-ROM PPT with Audio (GTAC2-9CD) .................................. 022-088 ..............93.75 Video Only (GTAC2- 9V) ............................................................. 022-098 ............100.00 GTAC Troubleshooter This diagnostic tool helps isolate common residential problems quickly and incorpo-rates both the Basic Symptom Analysis and Refrigerant-side Troubleshooting form used in GTAC-9. Diagnostic Tool (GTAC2-TS)....................................................... 022-050 ................4.75 GTAC-2 Binder Contains one each of the GTAC-2 Books listed here, Modules 1 through 9. Binder (GTAC2-BK)...................................................................... 022-125 ..............56.25 GTAC-2 Independent Study Program This self (home study) Comprehensive Course allows students to learn at their own pace. Order Text Book (022-025) and Test. Test only Includes: Registration Card, Course Description Brochure, Mid-Term and Final Exams with (2) Postage Paid Envelopes. Easy to Self-Administer You study books and take exams at intervals described. Then mail to us. We grade exams and return marks with fully explained remedial answers to questions answered incorrectly. Success is recognized Award certificate and transcript of test scores are sent to students who achieve an average test score of 70% or above. Test Only (GTAC2-ISP) ............................................................... 022-127 ............125.00 Bundle of 9 CD-ROM Presentations (PowerPoint) Contains one each of the GTAC-2 CD-ROM presentations listed here, Modules 1 through 9. Set of 9 CD-ROMs (GTAC2-CD)................................................ 022-089 ............729.00 Bundle of 9 Videos Contains one each of the GTAC-2 videos listed here, Modules 1 through 9. Set of 9 Videos (GTAC2-V) ......................................................... 022-099 ............687.50

TRAINING MATERIALS

3

GTE2 General Training Electricity (Fundamentals) Introduction to Electricity (GTE2-1) Introduces electrical terminology and basic concepts to students with limited knowl-edge of electricity. Covers Ohms Law, power, series and parallel circuits. Book Only (GTE2-101).................................................................022-201.................6.25 CD-ROM PPT with Audio (GTE2-1CD)......................................022-250.............. 93.75 Video Only (GTE2-1V)..................................................................022-260............ 100.00 Electrical Components and Their Symbols (GTE2-2) Introduces basic AC, magnetism, and common electrical components. Begins the coverage of wiring diagrams and their symbols by constructing a very basic circuit diagram. Book Only (GTE2-102).................................................................022-203.................6.25 CD-ROM PPT with Audio (GTE2-2CD)......................................022-251.............. 93.75 Video Only (GTE2-2V)..................................................................022-261............ 100.00 Wiring Diagrams (GTE2-3) Discusses safety practices and introduces additional electrical components. Step-by-step construction of a simplified wiring diagram; covering power, control, and load circuits for a typical packaged air conditioner with electric heat. Book Only (GTE2-103).................................................................022-205.................6.25 CD-ROM PPT with Audio (GTE2-3CD)......................................022-252.............. 93.75 Video Only (GTE2-3V)..................................................................022-262............ 100.00 Wiring Diagram Exercises (GTE2-4) Covers step-by-step construction of a wiring diagram for a heat pump to teach more advanced diagram reading skills and control circuit concepts. Book Only (GTE2-104).................................................................022-207.................6.25 CD-ROM PPT with Audio (GTE2-4CD)......................................022-253.............. 93.75 Video Only (GTE2-4V0.................................................................022-263............ 100.00 Electric Meters and Their Uses (GTE2-5) Discusses the construction of various types of meters and explains their applications. Sample problems illustrate the use of meters in electrical troubleshooting and testing. Book Only (GTE2-105).................................................................022-209.................6.25 CD-ROM PPT with Audio (GTE2-5CD)......................................022-254.............. 93.75 Video Only (GTE2-5V)..................................................................022-264............ 100.00

Alternating Current Fundamentals (GTE2-6) Expands on basic AC concepts covered in Modules 1 and 2 as the basis for under-standing AC motors and AC power. Covers basic concepts of motors and generators, capacitors, phase shift, and power distribution systems. Book Only (GTE2-106).................................................................022-211.................6.25 CD-ROM PPT with Audio (GTE2-6CD)......................................022-255.............. 93.75 Video Only (GTE2-6V)..................................................................022-265............ 100.00 Motor Fundamentals and Motor Protection (GTE2-7) Covers basic theory and operation of common single-phase and three-phase AC induction motors, including motor starting circuits. Describes the various types of protective devices used with motors. Book Only (GTE2-107).................................................................022-213.................6.25 CD-ROM PPT with Audio (GTE2-8CD)......................................022-256.............. 93.75 Video Only (GTE2-7V)..................................................................022-266............ 100.00 Electronic Devices and Circuits (GTE2-8) Discusses basic concepts, packaging, and troubleshooting of electronic circuits used in comfort air conditioning. Covers semiconductors, timing and sensing devices, and the use of microprocessor controls in comfort applications. Book Only (GTE2-108).................................................................022-215.................6.25 CD-ROM PPT with Audio (GTE2-8CD)......................................022-257.............. 93.75 Video Only (GTE2-8V)..................................................................022-267............ 100.00 Electrical Troubleshooting (GTE2-9) Describes and illustrates techniques for troubleshooting electrical and electronic circuits with a focus on control circuits and motors. Book Only (GTE2-109).................................................................022-217.................6.25 CD-ROM PPT with Audio (GTE2-9CD)......................................022-258.............. 93.75 Video Only (GTE2-9V)..................................................................022-268............ 100.00 GTE2 Book Assembly of one each of the GTE2 Books listed here, Modules 1 through 9. Book (GTE2-BK) ...........................................................................022-225.............. 56.25 GTE-2 Independent Study Program This self (home study) Comprehensive Course allows students to learn at their own pace. Order Text Book (022-025) and Test. Test only Includes: Registration Card, Course Description Brochure, Mid-Term and Final Exams with (2) Postage Paid Envelopes. Easy to Self-Administer You study books and take exams at intervals described. Then mail to us. We grade exams and return marks with fully explained remedial answers to questions answered incorrectly. Success is recognized Award certificate and transcript of test scores are sent to students who achieve an average test score of 70% or above. Test Only (GTE2-ISP)...................................................................022-227............ 125.00 Bundle of 9 CD-ROM Presentations (PowerPoint) Contains one each of the GTE2 CD-ROM presentations listed here, Modules 1 through 9. Set of 9 CD-ROMs (GTE2-CD) ...................................................022-259............ 729.00 Bundle of 9 Videos Contains one each of the GTE2 videos listed here, Modules 1 through 9. Set of 9 Videos (GTE2-V).............................................................022-269............ 687.50

TRAINING MATERIALS

4

GTH2 General Training Heating Introduction to Gas Heating (GTH2-1) Introduces students to four of eight foundation blocks: 1) Heat; 2) Molecules, Heat and Temperature; 3) Heat Transfer; 4) Pressure. Book Only (GTH2-101) ................................................................ 022-301 ................6.25 CD-ROM PPT with Audio (GTH2-1CD)..................................... 022-340 ..............93.75 Video Only (GTH2-1V)................................................................. 022-350 ............100.00 Principles of Gas Combustion (GTH2-2) Introduces the remaining four foundation blocks: 5) Gas Properties; 6) Combustion Theory; Practical Combustion; and 8) Efficiency. Book Only (GTH2-101) ................................................................ 022-303 ................6.25 CD-ROM PPT with Audio (GTH2-1CD)..................................... 022-341 ..............93.75 Video Only (GTH2-1V)................................................................. 022-351 ............100.00 Gas Furnaces (GTH2-3) Students learn basic furnace design, gas system components, furnace controls, and system controls and components. Book Only (GTH2-103) ................................................................ 022-305 ................6.25 CD-ROM PPT with Audio (GTH2-3CD)..................................... 022-342 ..............93.75 Video Only (GTH2-3V)................................................................. 022-352 ............100.00 Gas Burners (GTH2-4) Expands on basic concepts. Includes: theoretical flame characteristics; burner design; actual flame characteristics; combustion system; and pilot burners. Book Only (GTH2-104) ................................................................ 022-307 ................6.25 CD-ROM PPT with Audio (GTH2-4CD)..................................... 022-343 ..............93.75 Video Only (GTH2-4V)................................................................. 022-353 ............100.00 Gas Controls (GTH2-5) Focuses on controlled combustion process: gas controls; manual and automatic valves; and gas regulators. Book Only (GTH2-105) ................................................................ 022-309 ................6.25 CD-ROM PPT with Audio (GTH2-5CD)..................................... 022-344 ..............93.75 Video Only (GTH2-5V)................................................................. 022-354 ............100.00 Gas Ignition Systems (GTH2-6) Presents three types of ignition systems commonly used: standing pilot; re-ignition pilot; and direct burner ignition. Book Only (GTH2-106) ................................................................ 022-311 ................6.25 CD-ROM PPT with Audio (GTH2-6CD)..................................... 022-345 ..............93.75 Video Only (GTH2-6V)................................................................. 022-355 ............100.00

Safety & Operating Controls (GTH2-7) Covers basic theory and operation of common safety controls, operating controls, and system controls. Book Only (GTH2-107) ................................................................ 022-313 ................6.25 CD-ROM PPT with Audio (GTH2-7CD)..................................... 022-346 ..............93.75 Video Only (GTH2-7V)................................................................. 022-356 ............100.00 Installation Practices (GTH2-8) Students learn application principles: planning; designing; and selecting equipment, as well as proper gas piping techniques and installation practices. Book Only (GTH2-108) ................................................................ 022-315 ................6.25 CD-ROM PPT with Audio (GTH2-8CD)..................................... 022-347 ..............93.75 Video Only (GTH2-8V)................................................................. 022-357 ............100.00 Ventilation & Combustion Air (GTH2-9) Introduces terminology of Category I vent design basics, vent design and combustion air, as well as Category IV venting and combustion air. Book Only (GTH2-109) ................................................................ 022-317 ................6.25 CD-ROM PPT with Audio (GTH2-9CD)..................................... 022-348 ..............93.75 Video Only (GTH2-9V)................................................................. 022-358 ............100.00 Gas Troubleshooting (GTH2-10) Covers basic troubleshooting practices. Covers: basic adjustments; gas input; primary air; efficiency checks; furnace problems; how to identify and correct the operation and function of basic switches and loads. Book Only (GTH2-110) ................................................................ 022-319 ................6.25 CD-ROM PPT with Audio (GTH2-10CD)................................... 022-349 ..............93.75 Video Only (GTH2-10V)............................................................... 022-359 ............100.00 GTH-2 Binder Contains one each of the GTH Books listed here, Modules 1 through 10. Binder (GTH2-BK) ........................................................................ 022-325 ..............56.25 GTH-2 Independent Study Program This self (home study) Comprehensive Course allows students to learn at their own pace. Order Text Book (022-025) and Test. Test only Includes: Registration Card, Course Description Brochure, Mid-Term and Final Exams with (2) Postage Paid Envelopes. Easy to Self-Administer You study books and take exams at intervals described. Then mail to us. We grade exams and return marks with fully explained remedial answers to questions answered incorrectly. Success is recognized Award certificate and transcript of test scores are sent to students who achieve an average test score of 70% or above. Test Only (GTH2-ISP).................................................................. 022-327 ............125.00 Bundle of 10 CD-ROM Presentations (PowerPoint) Contains one each of the GTH CD-ROM presentations listed here, Modules 1 through 10. Set of 10 CD-ROMs (GTH2-CD) ................................................ 022-320 ............812.50 Bundle of 10 Videos Contains one each of the GTH videos listed here, Modules 1 through 10. Set of 10 Videos (GTH2-V).......................................................... 022-321 ............750.00

TRAINING MATERIALS

5

Computer-Based Training Programs HVAC Performance PLUS Simulator Replace costly, old-fashioned mechanical trainers with this exciting, state-of-the-art interactive computer simulation of an air conditioning system. Configure the system the way you want it by changing the type of compressor or metering device, or the system tonnage. Change ambient conditions and system operating parameters then observe, record, and compare the effects on system temperatures, pressures, effi-ciencies, refrigerant states, and power consumption. System responses can be shown and printed using P-H graphing and data tables. Contains a narrated introduc-tion to the simulator itself, including program features, navigation, suggested uses, and additional training resources. Includes one student workbook containing exer-cises with suggested inputs to simulate system responses in certain conditions. An outstanding teaching aid for instructors and a valuable learning tool for students from entry-level to experienced technician. Also includes two FREE simulated interactive service calls, testing the students ability to diagnose and correct mechanical and electrical circuit malfunctions. Additional Performance PLUS Troubleshooting CDs are available. (See below) Performance PLUS Simulator CD-ROM (GT65-03) .................020-546............ 750.00 Student Workbooks (GT65-O1)...................................................020-549 ............. 12.50 HVAC Performance PLUS Troubleshooting Practice The new HVAC Performance PLUS Troubleshooting Practice Series offers students the ability to refine their troubleshooting skills. Each practice session contains a CD with a selection of 11 real-life service problems where students use a virtual toolbox to diagnose and correct mechanical refrigeration cycle, air system or electrical circuit malfunctions. Student progress is monitored and recorded as they progress through each troubleshooting scenario. Ideal for self-study or classroom instruction. Series 1 CD-ROM.........................................................................020-547............ 237.50 Series 1 Network Version Upgrade.............................................020-564............ 125.00 Interactive - HVAC Refrigeration Cycle Troubleshooting This interactive training course is designed to increase a technicians ability to suc-cessfully detect, isolate, and determine required corrective action for refrigerant-side failures. It is a supplement for classroom instruction or self-study for students who have mastered the GTAC Series or who have had a minimum of 6 months direct supervised experience. Students begin with warm-up exercises to verify understand-ing of refrigeration cycle, appropriate test instruments, calculations of key refrigeration cycle parameters and review of vital signs of a normal cycle for air-cooled systems. Progresses through troubleshooting procedures by observation and pattern analysis to advanced troubleshooting and finally a series of exercises that draw upon the knowledge and skills developed in the previous lessons to test technicians trouble-shooting ability. Interactive CD-ROM (GT62-03)...................................................020-544............ 375.00

Interactive Electrical Troubleshooting This highly interactive multimedia program is designed for persons with prior knowl-edge of electrical troubleshooting fundamentals (as provided by the GTE Series above). Provides opportunities to practice and refine skills in troubleshooting HVAC electrical problems. Consists of lesson modules with related quizzes and trouble-shooting exercises providing simulated problem scenarios where learner must make troubleshooting decisions based on information given by the homeowner and from a description of the operating conditions of the equipment. Prompts student for input and provides immediate feedback including helpful remediation for questions an-swered incorrectly. Two-to-three contact hours are required to complete the program. Testing and record keeping functions are included. System requirements: 486 with 8 MB of RAM, Windows 3.1 or better, at least 10 MB free hard disk space. Interactive CD-ROM (GT61-03A)................................................020-543..........$375.00 Diagnosing and Preventing Hermetic Compressor Failures This new interactive program enables technicians to troubleshoot welded hermetic compressors. This interactive program develops skills that enable technicians to troubleshoot problems with welded hermetic compressors. It describes the two types of compressors covered in this program (scroll and reciprocating) including how they operate and the normal and abnormal sounds they make. Students use tests and measurements to isolate compressor faults. The basic troubleshooting process em-phasizes finding the root cause of the compressor problem. After completing these sections, students are required to solve 10 real-life-troubleshooting problems. The large number of job aids and other useful information in the comprehensive HELP section make student success easy. Interactive CD-ROM with Instructor Guide(GT64-03) ..............020-545............ 375.00 Student Workbook (GT64-01)......................................................020-551.............. 20.00 Basic Refrigeration Cycles Covers Reciprocating, Centrifugal, and Absorption Cycles with details on related compressors and systems. Discusses principal components of each cycle and how they function. (This interactive training program has options for self-study or class-room facilitation of Basic Refrigeration Cycles. Student self-study section includes skills checks, remediation, and testing. Instructor may navigate through graphics and control the multimedia features as required.) Interactive CD-ROM Disk, Instructions/Book) (GT56-03) .........020-530............ 187.50

TRAINING MATERIALS

6

Service Six Pack I Service Six Pack I Includes one each of the six basic service skills videos or CDs listed below. 6 CD-ROMs with Audio and Books (SK20-06CD)................... 020-099 ............281.25 6 VHS Videos with Books (SK20-06V)....................................... 020-098 ............312.50 Electrical Troubleshooting Follows a practical step-by-step path through the complexities of todays electrical circuitry. Graphic and easy-to-grasp, the materials teach the skills needed to find and correct electrical system problems. Book (SK14-01) ............................................................................ 020-057 ............... .3.75 CD-ROM PPT with Audio (SK14-02CD).................................... 020-625 ..............56.25 VHS Video (SK14-02V)................................................................ 020-223 ..............62.50 Residential Condensing Unit Replacement Replacement skills are a must for profitably tapping todays growing replacement market. This program graphically shows the steps for successfully replacing a resi-dential condensing unit. Book (SK15-01) ............................................................................ 020-059 ................3.75 CD-ROM PPT with Audio (SK15-02CD).................................... 020-626 ..............56.25 VHS Video (SK15-02V)................................................................ 020-224 ..............62.50 Hermetic Compressor Replacement First, the technician learns how to determine if the compressor has failed, and then he is taken, step-by-step, through a successful replacement procedure. Additionally, start up and checkout of the system is included. Book (SK16-01) ........................................................................... 020-061 ................3.75 CD-ROM PPT with Audio (SK16-02CD).................................... 020-627 ..............56.25 VHS Video (SK16-02V)................................................................ 020-225 ..............62.50 Brazing Brazing is a primary skill for a successful service technician. This module covers the basics of solder alloy types, heat ranges and fuels needed, along with equipment care and safety tips. Book (SK17-01) ............................................................................ 020-063 ................3.75 CD-ROM PPT with Audio (SK17-02CD).................................... 020-628 ..............56.25 VHS Video (SK17-02V)................................................................ 020-226 ..............62.50 Evacuation and Charging Often, experienced as well as beginning service personnel do not understand the technique of evacuation and charging. This module shows how to properly evacuate a system. Two methods of charging are presented, as well. Book (SK18-01) ........................................................................... 020-065 ................3.75 CD-ROM PPT with Audio (SK18-02CD).................................... 020-629 ..............56.25 VHS Video (SK18-02V)................................................................ 020-227 ..............62.50 Air Measurement Improper airflow often causes comfort system problems. Here, technicians are shown how to measure airflow using the heat rise method. They will gain the skills necessary to successfully troubleshoot system problems. Book (SK19-01) ........................................................................... 020-067 ................3.75 CD-ROM PPT with Audio (SK19-02CD).................................... 020-630 ..............56.25 VHS Video (SK19-02V)................................................................ 020-228 ..............62.50

Service Six Pack II Service Six Pack II Includes one each of the six basic service skills videos or CDs listed below. 6 CD-ROMs with Audio and Books (SK7-06CD)..................... 020-390 ............281.25 6 VHS Videos with Books (SK7-06V)......................................... 020-389 ............312.50 Metering Devices Three modern metering devices are shown operating in an air conditioning system. Includes common usage problems and troubleshooting situations. Book (SK1-01)............................................................................... 020-473 ................3.75 CD-ROM PPT with Audio (SK1-02CD)...................................... 020-631 ..............56.25 VHS Video (SK1-02V).................................................................. 020-229 ..............62.50 Add-On Air Conditioning Installation This program shows how to install an Add-On split system air conditioner. A natural enhancement to the training found in 6-Pack I. Book (S21-01) ............................................................................... 020-475 ................3.75 CD-ROM PPT with Audio (SK2-02CD)...................................... 020-632 ..............56.25 VHS Video (SK2-02V).................................................................. 020-230 ..............62.50 Gas Furnace Replacement Students learn how to remove and replace an existing gas furnace with a mid-efficiency model. Emphasis is on start-up and checkout of the new system. Book (SK3-01)............................................................................... 020-477 ................3.75 CD-ROM PPT with Audio (SK3-02CD)...................................... 020-633 ..............56.25 VHS Video (SK3-02V).................................................................. 020-231 ..............62.50 Advanced Troubleshooting This program builds on the training found in the original 6-Pack I presentation. It takes the technician through more complex problems using the proven hopscotch method. Book (SK4-01)............................................................................... 020-479 ................3.75 CD-ROM PPT with Audio (SK4-02CD)...................................... 020-634 ..............56.25 VHS Video (SK4-02V).................................................................. 020-232 ..............62.50 Electrical Test Instruments An overview of two of the most-used instruments in the technicians tool kit, the volt-ohmmeter and the clamp-on ammeter. Troubleshooting situations are emphasized. Book (SK5-01)............................................................................... 020-481 ................3.75 CD-ROM PPT with Audio (SK5-02CD)...................................... 020-635 ..............56.25 VHS Video (SK5-02V).................................................................. 020-233 ..............62.50 Air Conditioning Tune-Up Here we cover the steps required to checkout and tune-up an air conditioning system. These skills will be highly useful in this growing segment of service/maintenance business. Book (SK6-01)............................................................................... 020-483 ................3.75 CD-ROM PPT with Audio (SK6-02CD)...................................... 020-636 ..............56.25 VHS Video (SK6-02V).................................................................. 020-234 ..............62.50

SERVICING SKILLS

TRAINING MATERIALS

7

Understanding Electronic Controls I* Increases understanding of electronic controls. Book (SK8-01A) ............................................................................020-409.................7.50 VHS Video (SK8-02V) ..................................................................020-250.............. 93.75 Understanding Electronic Controls II Microprocessor Controls* Provides an understanding of relationship of inputs and outputs in microprocessor controls. Book (SK21-01).............................................................................020-102.................7.50 VHS Video (SK21-02V) ...............................................................020-251.............. 93.75 Understanding Electronic Controls Ill Variable Speed Technology* This program provides an understanding of variable speed motors and their use in modern heating and cooling systems. Book (SK27-01).............................................................................020-118.................7.50 VHS Video (SK27-02V)................................................................020-255.............. 93.75 Understanding Wiring Diagrams* This program describes how to read and interpret wiring diagrams. Book (SK13-01).............................................................................020-368.................8.75 VHS Video (SK13-02V)................................................................020-256.............. 93.75 Charging Procedures for Residential Condensing Units* Covers superheat and subcooling charging methods and procedures for correct system airflow using the Superheat/Subcooling Charging Calculator/Slide Rule. Book (SK28-01).............................................................................020-122.............. 10.00 VHS Video (SK28-02V)................................................................020-258.............. 93.75 Superheat/Subcooling Charging Calculator/Slide Rule (HCFC-22 only) (GT24-01)................................................................................................................3.85 Condensing Furnace Installation, Start-Up & Checkout* This program takes technicians through various aspects of condensing furnace instal-lation from initial survey of the job, the actual installation and the all-important start-up and checkout procedures. Book (SK31-01) ............................................................................020-076.............. 10.00 VHS Video (SK31-02V)................................................................020-259.............. 93.75 Proper Condensate Drain Connections Prevent stained ceilings and ruined furniture caused by backed-up condensate water. Shows how to prevent and eliminate these problems by understanding why they occur, dimensions for drain trap, as well as dos and don'ts of installing condensate drains. Video Only (PCD-02)....................................................................020-121.............. 31.25 Rooftop Operation and Maintenance Designed to guide building owners and operators through the service and mainte-nance requirements of packaged heating and cooling systems 3 tons and up. Identi-fies common problems and stresses planned maintenance and maintenance sched-uling. Covers Application and Operation, Installation Pitfalls, Maintenance Schedules and Maintenance functions the owner/operator will perform and Maintenance func-tions an air conditioning service company will perform. Book (GT60-01).............................................................................020-540.................6.25 CD-ROM PPT with Audio (GT60-02CD)...................................020-542.............. 93.75 VHS Video (GT60-02V)................................................................020-260............ 100.00 Clocking a Gas Meter Clocking the meter is one of the more commonly used methods for determining if a furnace or any gas-fired appliance is delivering its full rated input. This video shows how to perform this procedure. Video (SK36-02V) .........................................................................020-560............ $50.00

Measuring Flame Sensing Current Modern gas furnaces use the principle of flame rectification to determine if there is an adequate burner flame for safe operation. This video shows how to determine if the flame sensing circuits are operating correctly. Video (SK37-02V) .........................................................................020-561.............. 60.00 Leak Testing Residential and Light Commercial Refrig. Systems* This basic skills program covers equipment and techniques used to perform refriger-ant leak testing in residential and light commercial refrigeration equipment. Safety, Environmental and economic concerns are stressed throughout. Book (SK34-01).............................................................................020-095.................7.00 CD-ROM Slide Presentation (SK34-02CD) ...............................020-097.............. 87.50 VHS Video (SK34-02V)................................................................020-235............ $93.75 Leak Testing Liquid Chillers- Recip., Centrifugal and Absorption* Increase awareness of equipment and techniques used to perform refrigerant leak testing in applied equipment. Safety, environmental and economic concerns are stressed. Includes: Importance of leak detection & repair; monitoring equipment; and leak testing waterside components. Book (SK33-01) ............................................................................020-079.................7.00 CD-ROM Slide Presentation (SK33-02CD) ...............................020-080.............. 87.50 VHS Video (SK33-02V)................................................................020-236.............. 93.75 HVAC Handbooks HVAC Servicing Procedures No service vehicle should be without it! This rugged, 200 page bound book designed to be a handy, on-the-job reference. Printed on specially coated wipe-clean paper, it includes four major sections: Instruments and Devices; Safety; General Service Considerations; and Service Procedures; plus a Full Glossary and set of Pressure Temperature Charts. The CD version makes a great instructors tool with its hypertext and features like quizzes and supplemental reference charts. Handbook (SK29-01)....................................................................020-040.............. 31.25 CD-ROM Hypertext (SK29-01CD)..............................................020-039............ 125.00 HVAC Installation Procedures Every HVAC installer should have this rugged, 200-page, on-the-job reference book. Printed on specially coated paper, it includes sections on hand and power tools, piping practices, electrical hook-ups and duct installation. Additional sections cover installation of split systems, furnaces, packaged heating and cooling products. Valu-able start-up and checkout sheets are included. The hypertext version on CD is an excellent teaching tool and includes additional features such as ductwork sizing, metric conversions, electrical symbols and more. Handbook (SK32-01)....................................................................020-038.............. 31.25 CD-ROM (Hypertext SK32-01CD)..............................................020-037............ 125.00 HVAC Maintenance Procedures Handbook This newest reference rounds out our procedures handbook trilogy and focuses on practical maintenance techniques. Features the same rugged design as the earlier Servicing and Installation Procedures volumes and is intended to serve as an on-the-job reference. The books eight sections include well illustrated, step-by-step mainte-nance information in the following areas: Preventive, Safety, General, Electrical, Gas Furnace, Oil Furnace, Split and Packaged System and Accessories maintenance. Handbook (SK35-01)....................................................................020-093.............. 31.25 CD-ROM PowerPoint Presentation (SK35-01CD)....................020-094.............. 75.00

TRAINING MATERIALS

8

Rooftop Economizers Covers different types of economizers and their operation including the functions of their motors, dampers, and controls. Book (GT44-01) ............................................................................ 020-504 ................5.25 CD-ROM PowerPoint Presentation with Audio ......................... 020-244 ..............87.45 VHS Video (GT44-02V) ............................................................... 020-237 ..............87.50 Troubleshooting the Economizer Covers procedures for troubleshooting economizers and a brief review of operation of the major components and controls. Book (GT45-01) ........................................................................... 020-506 ................5.75 VHS Video (GT45-02V) ............................................................... 020-238 ..............87.50 Rooftop Air Test & Balance Covers the basics of air balancing for constant volume systems, a look at tools and instruments commonly used and follows through a typical balancing procedure. Book (GT46-01) ........................................................................... 020-508 ................5.75 VHS Video (GT46-02V) ............................................................... 020-239 ..............87.50

Troubleshooting Series Learn to detect and correct frequently occurring unit/system problems. Troubleshooting Residential Cooling Systems* Covers common problems encountered with residential cooling systems and how to correct them. Book (SK22-01)............................................................................. 020-107 ..............12.50 CD-ROM PowerPoint Presentation with Audio (SK22-02CD). 020-124 ..............87.50 Video (SK22-02V)......................................................................... 020-134 ..............87.50 Troubleshooting Furnaces * Covers common problems encountered with gas furnaces and how to correct them. Book (SK23-01)............................................................................. 020-109 ..............12.50 CD-ROM PowerPoint Presentation w/Audio (SK23-02CD)..... 020-128 ..............87.50 Video (SK23-02V)......................................................................... 020-135 ..............87.50 Troubleshooting Heat Pumps Residential-Light Commercial)* Covers preliminary inspection, insufficient air, improper defrost, excessive electrical consumption, proper refrigerant charge and special components. Book (SK24-01) ............................................................................ 020-111 ..............12.50 CD-ROM PowerPoint Presentation w/Audio (SK24-02CD)..... 020-129 ..............87.50 Video (SK24-02V)......................................................................... 020-136 ..............87.50 Troubleshooting (Semi-Hermetic) Compressors and Systems* Describes 3-step approach to determining interrelated compressor and system prob-lems. Relates pressure, temperature and electrical readings to possible problems. Book (SK25-01)............................................................................. 020-113 ..............12.50 CD-ROM PowerPoint Presentation w/Audio (SK22-05CD)..... 020-132 ..............87.50 Video (SK25-02V)......................................................................... 020-137 ..............87.50 Troubleshooting Reciprocating Liquid Chillers* Presents typical chiller operation, operation checks, symptoms of common problems, troubleshooting examples and exercises. This advanced program assumes the stu-dent has an understanding of basic principles of chiller operation. It features a typical job visit and use of a maintenance log to compare design temperatures to actual system readings. Book (SK26-01A).......................................................................... 020-115 ..............12.50 Maintenance Log (Pad of 25) (SK26-03A)................................. 020-117 ........ 5.00/pad CD-ROM PowerPoint Presentation w/Audio (SK26-02CD)..... 020-133 ..............87.50 Video (SK26-02V)......................................................................... 020-138 ..............87.50 Troubleshooting Rooftops* Helps technicians to troubleshoot rooftop units and to identify common problems. Use of a maintenance log and diagnostic trend chart is stressed to help technicians recog-nize abnormal operating conditions. Book (SK30-01)............................................................................. 020-125 ..............12.50 CD-ROM PowerPoint Presentation w/ Audio (SK27-02CD).... 020-127 ..............87.50 Video (SK27-02V.......................................................................... 020-139 ..............87.50

TRAINING MATERIALS

9

RESIDENTIAL PRODUCTS 38 Series Split System Condensing Units & Heat Pumps 38TD/YD Dual Speed Products Uses two-speed compressor and variable speed outdoor fan. Familiarization, Installa-tion, Service, Operating Sequences. Book (38TD/YD-01) ......................................................................023-807.................5.00 38TDB/YDB Puron, 2 Speed, Split System Heating & Cooling Units This training covers familiarization, installation, start-up and maintenance, and the electrical operating sequence. The CD-ROM-based PowerPoint presentation, which includes 95 color slides with a narrative sound track includes a viewer so you dont even need to have PowerPoint installed on your computer to play the presentation. Book (38TDB/YDB-01).................................................................023-820................ 7.00 CD-ROM Presentation with Audio (38TDB/YDB-02)................023-821.............. 87.50 Video Only (38TDB/YDB-03).......................................................023-822.............. 93.75 Puron, Split System Products (38TSA, TXA, TZA, YXA) Covers complete product line of split system air conditioners and heat pumps, which use Puron, the environmentally sound refrigerant. Program covers familiarization, installation and start-up, operating sequences and troubleshooting. Book (38T-01)................................................................................023-816.................7.00 CD-ROM Presentation with Audio (38T-02CD).........................023-819.............. 87.50 Video (38T-03)...............................................................................023-818.............. 93.75 Smart Heat Control Used with FA4, FB4 and FC4 heat pump fan coils to increase comfort and efficiency. Covers familiarization, installation and operating sequences. Book (F4-01)............................................................................ 92-024-016.................4.50 24AB/C Cooling & 25HB/C Heat Pump Base Model & Comfort Series Outdoor Units This training takes a systems approach, so that the new nomenclature of the system may be understood for all components and the interaction of indoor coil, TXV, refrig-eration piping and controls. It is more important than ever to apply the new outdoor products with the appropriate indoor furnace coil or fan coil. This is the key to achiev-ing the new SEER ratings and it influences warranty. Topics include familiarization, installation, and start-up, operating sequences, service and troubleshooting. Book (24AB/25HB-01)............................................................06-C24-019.................7.00 CD-ROM PowerPoint Presentation (24AB/25HB-02CD)...06-C24-020.............. 87.50 58 Series Gas Furnaces 58STA, DLA, CTA & CVA Non-Condensing, Multi-Poise Gas Fired Furnace - Weathermaker 8000 Topics covered are: Familiarization, Installation, Start-Up and Electrical Operating Sequences. Book (58CVA-01)..........................................................................025-859.................6.25 CD-ROM PowerPoint Presentation w/Audio (58CVA-02)........025-860.............. 87.50

58MTA, MCA, MXA, & MVP Multipoise, Condensing Gas-Fired Furnace (90%) Updated to include the two-stage 58MTA and the single-stage standard 58MCA condensing furnace as well as the existing single-stage deluxe 58MXA and variable speed 58MVP furnaces. Discusses the implementation of the controls boards from the Weathermaker 8000 furnace line. Book (58MTA-01)..........................................................................025-861.................6.25 CD-ROM PowerPoint Presentation w/Audio (58MTA-02)........025-862.............. 87.50 58UHV Two-Stage Furnace with ICM Motor This two-stage, non-condensing 80 AFUE furnace features a variable-speed ICM blower motor that provides precise airflow delivery and lower power consumption. Includes ICM detailed electrical operating sequences and electrical troubleshooting information. Book (58UHV-01)..........................................................................025-853.................6.25 58WAV/58ZAV Mid-Efficiency Furnaces with Hot Surface Ignition 80 AFUE (Replaces 58SSC). Covers upflow and downflow versions. Familiarization, Start-Up, Checkout and Operating Sequences. Book (58WAV-01) .........................................................................025-839.................6.25 61 Series Boilers BW9 Series Gas-Fired, 90%, Hot Water Boiler This program covers familiarization, installation, start-up and maintenance, and the electrical operating sequence. The program consists of two separately available components: a CD-ROM-based PowerPoint presentation, which includes 61 color slides with a narrative sound track, and a 30 page, illustrated companion booklet. A PowerPoint player is included on the CD so you dont even need to have PowerPoint installed on your computer to play the presentation. Book (GT66-01).............................................................................020-562.............. 7.00 CD-ROM PowerPoint Presentation with Audio (GT66-02).......020-563............ 110.00 Zoned Products Comfort Zone II-B Zoned Duct Products This program covers familiarization, installation, configuration, operating sequences and troubleshooting. The program consists of two separately available components: a CD-ROM-based PowerPoint presentation, which includes 81 color slides with a narrative sound track, and a 50 page, illustrated companion booklet. A PowerPoint player is included on the CD so you dont even need to have PowerPoint installed on your computer to play the presentation. Book (CC-04).................................................................................027-001.................7.00 CD-ROM PowerPoint Presentation with Audio (CC-05)...........027-000.............. 87.50 Comfort Zone II This service training program introduces the Comfort Zone II line of residential zoned duct products. These new and improved zoned products are easier to install, have fewer components and deliver enhanced indoor comfort. Covers product familiariza-tion, installation, operating sequences and troubleshooting. No audio. Book (ZONECC-01)......................................................................809-596.................5.75 CD-ROM Slide Presentation (ZONECC-03)..............................809-597.............. 87.50

CARRIER PRODUCT

TRAINING MATERIALS

10

COMMERCIAL & APPLIED 16 Series Absorption Chillers 16DF Direct-Fired, Double-Effect Absorption Chiller (135-500 Tons) Familiarization, Controls and Control Sequence, Wiring Diagrams, Before Initial Start-Up, Start-Up and Maintenance. Book (16DF-01) ........................................................................... 021-600 ................6.25 16HA Hermetic Absorption Liquid Chillers Basic Cycle, Familiarization & Op Sequences Book SM-20 ... 020-330 ..............10.00 16JA, JB Hermetic Absorption Liquid Chillers Basic Cycle, Familiarization & Op Sequence Book SM-21 ..... 020-331 ..............10.00 16JT Steam, Double-Effect Absorption Chiller (90-1500 Tons) Familiarization, Controls and Control Sequence, Before Initial Start-Up, Start-Up and Maintenance. Book (16JT-01) ............................................................................. 021-602 ................6.25 16JT Steam, Double-Effect Absorption Chiller Control System PIC Program covers the application and use of Product Integrated Controls (PIC) in the 16JT double-effect absorption Chiller, including: Familiarization, Inputs and Outputs, LID Operation and Screens, Software/menu structure, Control Start-Up and shutdown sequences, and Troubleshooting. Book (16JT-03) ............................................................................. 021-604 ................6.25 CD-ROM PowerPoint with Instructor Notes (16JT-04CD) ...... 021-606 ..............87.50 Absorption Machine Equilibrium Diagram with PIC This is an important tool for troubleshooting both single- and double-effect absorption machines equipped with Product Integrated Controls (PIC). Universal charts based on the McNeeley equations are used to plot absorption machine cycles, to find ab-sorber loss, and help diagnose problems. Its extended range allows plotting of all double-effect absorption machines. Pad of 25 charts (GT63-01)......................................................... 020-501 ................4.50 Laminated Chart (GT63-02) ........................................................ 020-516 ................5.75

17/19 Series Centrifugal Liquid Chillers 17FA/19FA Open/Hermetic Centrifugal Liquid Chillers Refrigeration cycle, lube cycle and controls. High pressure machine. Book (SM-22) ................................................................................ 020-332 ..............10.00 19C, CB Hermetic Centrifugal Liquid Chillers Machine assembly, purge cycle, lube cycle and controls. Low pressure machine. Book (SM-23) ................................................................................ 020-333 ..............10.00 19D, DA, DG Hermetic Centrifugal Liquid Chillers Machine assembly, refrigeration cycle, motor cooling, lubrication cycle, purge cycle and controls. Low pressure machine. Book (SM-24) ................................................................................ 020-334 ..............10.00 19EA, EB Hermetic Centrifugal Liquid Chillers Refrigeration cycle, motor cooling, lubrication cycle, pumpout unit, operation and controls. High pressure machine. Book (SM-25) ................................................................................ 020-335 ............$10.00

19 Series Centrifugal Chiller Operation and Maintenance Designed for owners, machine operators and those who maintain centrifugal chillers, this program explains how a chiller works and what must be done to insure continued, trouble-free operation. Covers machine familiarization, refrigeration cycle, chiller controls, chiller operation, refrigerant management, maintenance and safety. De-signed for Carriers 19XL, XR, XRT and EX machines, but can be applied to any centrifugal. CD has no audio. Book (19-01).................................................................................. 021-911 ................5.75 CD-ROM PowerPoint (19-02CD) ............................................... 021-912 ..............87.50 Video (19-02V) .............................................................................. 021-916 ..............87.50 19XB Positive Pressure Storage System The 19XB Positive Pressure Storage System with pumpout unit is used for storage and management of positive pressure refrigerants HFC-134a and HCFC-22 during service and repair work. Program covers: Controls and components, Overview, Op-eration, Maintenance and Troubleshooting. Video Only (19XB-02) .................................................................. 021-913 ..............62.50 19XL Centrifugal Chiller Control System (PIC) Familiarization, PIC components and circuitry, inputs and outputs, user operations, start-up and shutdown and troubleshooting. Also applies to 19XR/XRT models. Book (19XL-01)............................................................................. 021-900 ................5.00 CD-ROM PowerPoint with Audio (19XL-02CD)........................ 021-914 ..............87.50 Video (19XL-03V) ......................................................................... 021-915 ..............93.75 19XR/XRT Hermetic Centrifugal Liquid Chillers (350-800 Tons) Introduces the 19XR centrifugal and the 19XRT turbine-assisted centrifugal chillers with HFC-134a. Covers: compressor, controls, starters, lubrication system, motor and oil cooling. Book (19XR/XRT-01) ................................................................... 021-904 ................5.00 CD-ROM PowerPoint with Audio (19XR/XRT-02CD) .............. 021-906 ..............87.50 19XR/XRT EvergreenTM Centrifugal Chiller Control System PIC II Features the application and use of PIC II in the 19XR/XRT Evergreen Centrifugal Chiller. Covers familiarization, inputs and outputs, operation and software structure, configuration procedures, operating schedules, start-up and shutdown sequences, alarms and alerts, and troubleshooting. Book (19XR/XRT-04) ................................................................... 021-908 ................5.75 CD-ROM PowerPoint with Audio (19XR/XRT-04CD) ............. 021-909 ..............87.50 Video (19XR/XRT-03V)................................................................ 021-917 ..............93.75 19XT Turbine-Assisted Centrifugal Chiller - HFC 134a (300-550 Tons) Introduces 19XT chillers with new design features including: turbine rotor, nozzle block, nozzles, float chamber, floats and more. Covers: Machine Familiarization, Turbine Design, Refrigerant Control, Lubrication, PlC Control, Operating System Control, Start-Up and Shutdown, Maintenance and Troubleshooting. Also applies to XRT models. Book (19XT-01)............................................................................. 021-902 ................7.00

TRAINING MATERIALS

11

Centrifugal Control 17/19 Machines 3200MP Centrifugal Control (Part 1) Familiarization, Operating Sequences, Purge Cycle and Operation of the Diffuser Wall. Book (32MP-01A) .........................................................................021-022.................5.75 CD-ROM PowerPoint with Audio (32MP-02A-CD) ...................021-026.............. 87.50 3200MP Centrifugal Control (Part 2) Start-Up and Troubleshooting, DIP Switch Settings, Controls Tests and Diagnostic Codes. Book (32MP-03A) .........................................................................021-024.................5.75 CD-ROM PowerPoint with Audio (32MP-04A-CD) ...................021-027.............. 87.50 3200MP Centrifugal ControlExpanded Service Panel (ESP-ll) Latest enhancements of 3200MP to provide centrifugal chiller operation and control (i.e. CCN, CHILLERVISOR, Gateway). Familiarization, Application, Operation, Start-Up Programming and Troubleshooting. Book (32MP-05) ...........................................................................021-013.................6.25 CD-ROM PowerPoint with Audio (32MP-06A-CD) ...................021-031.............. 87.50 32SM Centrifugal ControlDesign Two This program covers the control sequence build-up, program timer sequence, and the safety circuits for 19 Series 32SM Controls-Design Two used on models 19DG,DH,DK,DM,EA,EB,EF,FA and retrofits. Student Book (32SM-01)..............................................................021-028.................5.00

23 Series Screw Chillers 23XL Screw Chiller Control System with PIC Familiarization, PIC components and circuitry, inputs and outputs, user operations, start-up and shutdown and troubleshooting. Book (23XL-01A)...........................................................................023-010.............. 10.00 30 Series Packaged Recip. Liquid Chillers 30G Series (Air Cooled), 30H Series (Air-Water Cooled), 30GB Liquid Chillers (40-70 Ton) Familiarization, Installation, Operating Sequences and Service. Book (30GB-01) ...........................................................................023-042.................6.25 30GB Conventional Chillers (75-200 Ton) Familiarization, Op Sequences (Step Controller) and Troubleshooting. Book (30GB-03) ...........................................................................021-002.................5.50 30GB Flotronic Control System (40-200 Ton) Two-digit display. Electronic Components, Start-Up and Troubleshooting. Also applies to 30GT and GU models. VHS Video transfer of slides, Book (30GB-09) ..........................021-012.............. 62.50 Book (30GB-05) ............................................................................021-004.................5.00 30GB (40-200 Ton), 30GT (225-280 Ton) Flotronic II Reciprocating Liquid Chiller Control System with PIC Eight-digit display. Familiarization, Start-Up and Operating Sequences. Also applies to 30GN models. Book (30GB, GT-01).....................................................................021-020.................5.75

30GT Reciprocating Liquid Chillers (15-35 Ton) Familiarization, Installation, Start-Up and Service. Book (30GT-01).............................................................................021-017.................5.00 VHS Video (30GT-02V)................................................................021-032.............. 93.75 30GTN,R/GUN,R Reciprocating Air-Cooled Liquid Chillers with ComfortLinkTM Controls This program covers Familiarization, Hardware, Inputs and Outputs, Menu Structure, Controls Operation, Configuration & Setpoints, Initial Start-Up, Service and Trouble-shooting. CD has no audio. Book (30GTN-01)..........................................................................023-005.................6.25 CD-ROM PowerPoint Presentation (30GTN-02PP) ................023-004.............. 87.50 30GX,HX EcologicTM Liquid Chillers Machine Familiarization These state-of-the-art, ultra-reliable, high efficiency chillers are designed for the envi-ronmentally friendly R-134a. This first program covers: Product Familiarization, Con-trols, Installation, Pre-Start Procedures, Start-Up and Operation, Maintenance and Service. (Revised 1998) Book (30GX,HX-02A) ..................................................................023-044.................6.25 CD-ROM PowerPoint with Audio (30GX,HX-01A PPT) ...........023-058.............. 87.50 30GX,HX Operating Controls with PIC This program addresses operating controls of this chiller, specifically: Functions and Features, Wiring and Components, Inputs and Outputs, Software Structure, LID Screens, Control Algorithms, Wye-Delta Starting, and Troubleshooting. (Revised 1998) Book (30GX,HX-04A) ..................................................................023-046.................6.25 CD-ROM PowerPoint with Audio (30GX,HX-03A PPT) ...........023-059............ $87.50 30GX,HX Refrigeration System Covers; System Description, Operation and Components, Control Devices, Mainte-nance and Service. (Revised 1998) Book (30GX,HX-06A) ..................................................................023-048.................6.25 CD-ROM PowerPoint with Audio (30GX,HX-05A PPT) ...........023-060.............. 87.50 30GX,HX 06N Compressor Covers: 06N Compressor Familiarization, Operating Parameters, Refrigeration Cy-cles, Motor Cooling, Lubrication, Loading/ Unloading, Compressor Protection, Motor Starting, Service & Troubleshooting. (Revised 1998) Book (30GX,HX-08A) ...................................................................023-050.................6.25 CD-ROM PowerPoint with Audio (30GX,HX-07A PPT) ...........023-061.............. 87.50 30GXN,R ECOLOGIC Chillers with ComfortLink Controls ComfortLink Controls for the GXN/R air-cooled and the 30HXA,C water cooled and condenserless screw compressor chillers. This program covers: Familiarization, Hardware, Inputs and Outputs, Menu Structure, Controls Operation, Configuration & Setpoints, Initial Startup, Service and Troubleshooting. No audio on CD. Book (30GXN,R/HX-01) ...............................................................023-054.................6.25 CD-ROM PowerPoint Presentation (30GXN,R/HX-02)............023-055.............. 87.50 30HK,L,W and 30GTN Recip. Chillers with ComfortLink Controls ComfortLink is a direct digital control system, evolving from the Flotronic controls used in the 30 Series chillers. This program covers: Familiarization, Hardware, Inputs and Outputs, Menu Structure, Controls Operation, Configuration & Setpoints, Initial Startup, Service and Troubleshooting. No audio on CD. Book (30HK,HL,HW-01)...............................................................023-056.................6.25 CD-ROM PowerPoint (30HK,HL,HS-02)....................................023-057.............. 87.50

TRAINING MATERIALS

12

30HR,HS Flotronic Plus Control System with PIC (70-160 Ton) Familiarization, User Operations, Troubleshooting, and Operating Sequences. Book (30HR,HS-01A)................................................................... 021-015 ................5.75 VHS Video (30HR,HS-02AV)...................................................... 021-033 ..............93.75 30RA AquaSnapTM Chiller with ComfortLinkTM Controls Service training on the 30RA AquaSnapTM air-cooled chiller with an integrated hy-dronic system and Comfort LinkTM direct digital control system. The material covers: Familiarization; Hardware, Inputs and Outputs, Menu Structure, Controls Operation, Configuration and Setpoints, Hydronic System Set-up; Initial Start-Up; Service and Troubleshooting. Book (30RA-02) ............................................................................ 023-063 ................6.25 CD-ROM PowerPoint with Audio (30RA-01CD) ....................... 023-062 ..............93.75 33 Series Control Systems 33AM Comfort System Air Manager Direct digital control offers an integrated approach for both constant volume and variable air handler applications. Familiarization, System Components, System Op-eration, Configuration Procedures, Initial Start-Up, & Troubleshooting. Book (33AM-01) ........................................................................... 023-306 ................6.00 CD-ROM Presentation with audio (33AM-02CD) ................... 023-308 ..............87.50 33ZC ComfortID Zone Controller Introduces the ComfortID Zone Controller, capable of controlling all Carrier and many non-Carrier, air terminal units in variable air volume, zone pressure control and dual duct air systems. Become familiar with the product, its components and operation so you can configure the controls for normal operation and perform basic troubleshoot-ing. Application, Familiarization, Inputs/Outputs, Wiring, Operating Sequence, Installa-tion, Configuration, System Start-Up, Service & Troubleshooting. Book (33ZC-01) ............................................................................ 023-309 ................6.25 CD-ROM PowerPoint with Audio(33ZC-02) .............................. 023-310 ............100.00 VVT Comfort System A VVT (Variable Volume/Variable Temperature) System uses electronically-controlled zone dampers, relays, sensors, and monitoring thermostats to control more than one zone of a heat/cool system. It delivers the appropriate quantity and volume of air to the various zones from a central apparatus, most commonly a packaged rooftop unit. Overview & Familiarization, Operation, Installation, Start-Up & Configuration, Trouble-shooting & Service. CD has no audio. Book (33CS-01) ........................................................................... 023-301 ................9.25 CD-ROM PowerPoint Presentation (33CS-02CD) .................. 023-300 ..............87.50 TEMP System A TEMP System uses programmable thermostats (interfaced through a communica-tions bus) to coordinate the operation of multiple heating/ cooling units for maximum comfort with as little energy consumption as possible. Overview & Familiarization, Operation, Installation, Start-Up & Configuration, Troubleshooting & Service. CD has no audio. Book (33CS-03) ........................................................................... 023-303 ................7.00 CD-ROM PowerPoint Presentation (33CS-04CD) ................... 023-305 ..............87.50

35,35,45 Air Terminals/40 Series Unit Ventilator 35/45 Series Air Terminals Features the 35D, 45S and 45T air terminal units. Covers: Familiarization, Controls, Operation, Installation, Balancing, Maintenance and Service. Controls include: pneu-matic, analog electronic, PIC and VVT. No audio. Book (35/45-01) ............................................................................ 023-500 ................7.00 CD-ROM Electronic Slide Presentation (35/45-02CD) ............ 023-502 ..............87.50 37HS, HC Moduline Air Terminals (100-400 CFM) Familiarization, Operating Sequences, Installation, Start-Up and Service. Includes 37HC Air Terminals with PIC control. Book (37H-01)............................................................................... 023-704 ................5.75 40UV/UH Comfort System Unit Ventilator Control (PIC) This control product is typically used with unit ventilators in applications such as schools, hospitals, etc. Familiarization, capacity control, typical operating cycles, configuration, installation, start-up, maintenance and service are included. Book .............................................................................................. 024-007 ................6.25 39L Central Station Air Handling Units 39L Central Station Air Handling Units Control System PIC (Part 1) Familiarization, User Operations and Start-Up. Also applies to 39N and T models. Book (39L-01) ............................................................................... 023-900 ................5.75 39L Central Station Air Handling Units Control System PIC (Part 2) Book (39L-03)................................................................................ 023-902 ................5.75 48/50 Series Rooftop Units 48/50A and 48/50Z Series Large Rooftop Air Conditioners with ComfortLink Version 3.X Controls This program covers familiarization, controls, inputs and outputs, software menu structure, unit operation, configuration & setpoints, initial startup building pressure control, economizer, service and troubleshooting. When you are finished, you should have a good understanding of how this new control system works and how to operate and troubleshoot it. Book ..........................................................................................06-024-883 ................5.60 CD-ROM PowerPoint Presentation with Audio ....................06-024-882 ..............64.00 48 Series (Electric Cooling - Gas Heating), 50 Series (Electric Cooling - Electric Heat or Heat Pumps), 48/50 Series Rooftop Units (3-18 Ton) General Procedures for Installation, Start-Up, and Balance of Air Flow for light com-mercial equipment. Book (48/50-01) ............................................................................ 024-805 ................4.75 48/50DJ, DK Electronic Controls (20-27 Ton) (Part 1) Weathermaker II Familiarization.Book (48/50DJ, DK-01)......... 024-812 ................4.75 48/50DJ, DK Electronic Controls (20-27 Ton) (Part 2) Weathermaker II Start-Up, Operating Sequences and Troubleshooting. Book (48/50DJ, DK-03)................................................................ 024-814 ................4.75

TRAINING MATERIALS

13

48/50DJ, DK Electronic Controls (30-75 Ton) Weathermaker III Familiarization, Installation and Start-Up, Operating Sequences and Troubleshooting. Book (48/50DJ, DK-05) ................................................................024-816.................4.75 48/50 E-Series Rooftop Units (20-45 Ton) Familiarization, Installation and Troubleshooting of 48/50EJ,EW constant volume and 48/50EK, EY variable volume products. This program highlights variable frequency drive. Book (48/50E-01) ..........................................................................024-879.................7.00 CD-ROM Slide Presentation (48/50E-02CD).............................024-880.............. 87.50 48GS/GX/GP, 50GS/GX/GL, 50JS/JX Packaged Heating & Cooling Units This program covers familiarization, installation, service requirements, and electrical operating sequences and troubleshooting. Book................................................................................................024-881.................7.00 CD-ROM PowerPoint Presentation with Audio..........................024-882.............. 87.50 48/50HG Centurion TM Rooftop with Comfort LinkTM Controls Featuring the ComfortLinkTM family of Carrier product controls for the 4850 HG Centu-rionTM packaged rooftop units. Includes: Familiarization, Hardware, Inputs and Out-puts, Menu Structure, Controls Operation, Configuration and Setpoints, Initial Start-Up, Service and Troubleshooting. Book (48/50HG-01).......................................................................024-840.................7.00 CD-ROM PowerPoint with Audio (48/50HG-02)........................024-841.............. 87.50 48/50HJ Standard Efficiency Rooftop Units (3-12.5 Ton) Covers 1994 models of the 48HJ Gas Heating/Electric Cooling units that use the new Integrated Gas Unit Controller (IGC) and the 50HJ Electric Heating/Electric Cooling Rooftop Units. Topics discussed include: Familiarization, Installation, Start-Up, Electri-cal Operating Sequence, Maintenance and Troubleshooting. (Also see GT-54 "YAC Integrated Gas Unit Controller" program on page 35) Book (48/50HJ-01)........................................................................024-836.................5.75 CD-ROM PowerPoint with Audio (48/50HJ-02CD)...................024-843.............. 87.50 VHS Video (48/50HJ-02V) ...........................................................024-842.............. 95.00 48/50HJ High-Efficiency Rooftop Units (3-12.5 Tons) Covers the 1995 48HJ Gas Heating/Electric Cooling Units using the lGC controller, and the 50HJ Electric Heating/Electric Cooling High Efficiency Rooftop Units. Covers: Familiarization, Installation, Start-Up, Electrical Operating Sequence, and Electrical Troubleshooting. (Also see GT54, "YAC Integrated Gas Unit Controller" program on page 35) Book (48/50HJ-03)........................................................................024-838.................6.50 VHS Video (48/50HJ-04V) ...........................................................024-844.............. 95.00 48/50NB,NP Rooftop Unit with PIC Phase II Controls (20-75 Ton) This program covers unit and PIC controls, familiarization, operating controls, start-up, operating sequence and troubleshooting for the Weathermaker II and III. Also applies to MP models. Book (48/50NB, NP-01)................................................................024-823.................7.00

50HJQ/TJQ Packaged Rooftop Heat Pumps (3-12.5 Ton) Covers the 12.0 SEER 50HJQ, which uses scroll compressor(s), and the 10.0 SEER 50TJQ that uses reciprocating compressors. Includes: Familiarization, Installation and Start-Up, Electrical Operating Sequences, and Electrical Troubleshooting. Book (50HJQ/TJQ-01)..................................................................025-059.................6.25 50ZP Packaged Air Conditioner (2-5 Tons) Covers Familiarization, Installation, Start-Up and Maintenance, Electrical Operating Sequence and Electrical Troubleshooting of this packaged air conditioner which features through-the-top servicing. Book (50ZP-01) ............................................................................ 025-069.................5.25

50 Series Water Source Heat Pumps 50QEH/QEV Water Source Heat Pumps (1/2-6 Ton) Covers 50QEH, QEV Electronic and 50QXH, QXV electro-mechanical, vertical and horizontal models. Familiarization, Installation and Start-Up, Maintenance, Electrical Operating Sequence and Troubleshooting. Book (50QEH/QEV-01) ................................................................025-044.................4.75 VHS Video (50QEH/QEV-02V) ...................................................025-064.............. 95.00 53 Series Duct-Free Split Systems 53HDS Multi-Split, Duct-Free Systems (2-4 Tons) Covers Familiarization, Installation, Electrical Operation, and Maintenance of the 38HDS condensing unit and 400NB, 40QAB and 400KB fan coils. Book (53HDS-01)..........................................................................025-306.................5.25 CD-ROM Electronic Slide Presentation (53HDS-02CD) ..........025-307.............. 87.50

TRAINING MATERIALS

14

Gas Furnaces 310, 311, 312 AND 315AAV Plus 80 Non-Condensing, Multipoise, Gas-Fired Furnace Topics covered are: Familiarization, Installation, Start-Up, and Electrical Operating Sequences. Book ............................................................................................. 0231-000 ................6.25 CD-ROM PowerPoint Presentation with Audio ....................... 0231-001 ..............82.50 333BAV Two-Stage Furnace with ICM Motor This two-stage, 80 AFUE furnace features a variable-speed ICM blower motor which provides precise airflow delivery and lower power consumption. ICM and accompany-ing electronic controls are featured along with electrical operating sequences and troubleshooting. Book ......................................................................................BDP-025-853 ................5.25 340MAV, 350MAV, 352MAV and 355MAV Multipoise, Condensing, Gas-Fired Furnace 90% Updated to include the two-stage 352MAV and the single-stage standard 3409MAV condensing furnaces, as well as the existing single-stage deluxe 350MAV and vari-able-speed 355MAV furnace. Discusses the implementation of the control boards from the Plus 80 furnace line. Book ............................................................................................. 0234-000 ................6.25 CD-ROM PowerPoint with Audio.............................................. 0234-001 ..............93.75 395CAV Mid-Efficiency Furnaces with Hot Surface Ignition 80 AFUE (Replaces 395C). Covers upflow and downflow versions. Familiarization, Start-Up, Checkout and Operating Sequences. Book ......................................................................................BDP-025-839 ................4.75

Boilers BW9 Series Gas-Fired, 90%, Hot Water Boiler This program covers familiarization, installation, start-up and maintenance, and the electrical operating sequence. The program consists of two separately available components: a CD-ROM-based PowerPoint presentation, which includes 61 color slides with a narrative sound track, and a 30 page, illustrated companion booklet. A PowerPoint player is included on the CD so you dont even need to have PowerPoint installed on your computer to play the presentation. Book (GT66-01) .........................