114 linxRAiLinG Tm composite railing system · Linx railing system - an astonishing, simple...
Transcript of 114 linxRAiLinG Tm composite railing system · Linx railing system - an astonishing, simple...
© 2010 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
114R
AIL
ING
S
• straight runs
for years, the technology surrounding guardrail systems has remained unchanged. in response to increased demand for safety on the highway, furnitubes have designed and developed the patented Linx railing system - an astonishing, simple revolution in guardrail design and installation.
The linx system:
■ utilises standard components
■ doesn’t require radiused panels
■ requires minimal site survey
■ suitable for almost every site
■ available in a range of options
■ 100% recyclable
linx2
00se
ries
linx3
00se
ries
linx1
00se
ries
linx3
00se
ries
the Linx railing system has been designed with every customer in mind, for installation in almost every situation with only a minimal site survey requirement.the Linx’s unique post to panel connection enables modular panels to be fitted and adjusted on site, to a variety of radii and height levels. the modular design also enables clients to keep a ready stock of spare panels for instant replacement should any of the railing system be damaged.
in addition to the standard rectangular rail of the Linx 100 and 200, the Linx 300 and Linx 400 offers a circular rail for more decorative applications.
linxRAiLinGTm
• gradients
• bends, corners
• & all combinations
composite railing system
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2010 Copyright Reproduction Prohibited
115
Linx
™ R
ailin
g
As a means of improving the line-of-sight between drivers and pedestrians, and increasing safety, furnitubes offer a variety of High Visibility options for Linx panels and posts.
Those involved in specifying and installing guardrail are all too aware of the inflexibility of most systems. the necessity for a full site survey and the manufacture of 'special' components and 'one-offs' to suit specific site conditions is time-consuming and expensive. furthermore, if replacement sections are required after an accident has occurred, the exact damaged components need to be identified and new 'special' components manufactured. this inevitably results in the site being left in disrepair for a long period of time.
linxRAiLinGTm
explained
the Linx range comprises 4 basic series, based on different post and horizontal bar sections and sizes. in each series the post can be fitted with a choice of top caps and collars that enable countless decorative combinations.
the modular design also allows clients to keep a ready stock of spare panels for instant replacement should any of the railing system be damaged.
100 series 200 series 300 series
cast cap variations
linx100 Knightsbridge cap
linx100 trafford cap
linx100 Hale cap
linx100 Ashton cap
linx100 euston cap
The Linx railing system range is a complete solution. the unique, patented post-to-panel connections of the Linx enables standard straight panels to be adjusted in angle and height on site, to suit a variety of curves, bends, junctions and levels.
iT’S So Simple iT’S BrillianT!
▲ LINX 300 3/4 GUARDRAILKnightsbridge post
▲ LINX 100 VISI-POSTS with V2 High Visibility Raileuston post and base collarinstalled at Deptford broadway, London
400 series
© 2010 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
116R
AIL
ING
S
the following images are taken from a workshop demonstration of the step-by-step assembly sequence for the Linx 100 series patented bracket connection, showing how variable angles and heights can be achieved with standard posts and panels, and therefore how standard components can be used for virtually all sites.
The complete video from which these stills have been taken is available on video CD-ROM. Please contact a member of Furnitubes sales team to request a free copy.
the video cD also contains additional footage of the Linx 100 series during site assembly and of a number of completed installations.
* note: the post shown here is a Linx 100 ‘High Visibility’ post (with sight gap) which requires all brackets to be bolted to the post on site in order to adjust the precise rotation of the post cut-out gap section. the rotation angle of non-visirail posts (without gap) is not important, and brackets are supplied pre-fixed on one side of the post.
FITTING THE BRACKETthe bracket is shaped to suit the post diameter and is fastened by a simple bolt connection to the previously fixed rivnut.
THE BRACKETthe bracket now forms a solid connection on the post. the fixing shown here will be hidden when the railing panel is attached.
OFFERING UP THE RAILINGSthe railing panel, or individual rail is loosely attached to the bracket by the supplied fixings until final adjustment is made.
SECURING THE RAILINGSA small degree of lateral adjustment is achieved by means of the slot in the bracket. once in the correct position, fixings are tightened so the post and panel or rail form a combined solid structure.
THE NEXT PANEL...the bracket is positioned on the post at an angle and height to suit the position of the next post in the line of railings and the assembly sequence as described above is repeated.
THE ASSEMBLY KITAll brackets and fixings are supplied as standard. the only specialist item required is the rivnut tool, available from furnitubes at a nominal price.
MARKING THE BRACKETSWhen the height and angle of the railing has been determined, hole centres for the fixing brackets are marked and centre punched.
DRILLING THE POSTA 12mm diameter hole is drilled through the wall of the post at the marked positions.
THE RIVNUTAs the name suggests, a rivnut is a combination of a rivet and a nut - essentially a rivet that has an internal thread and is shown here being fitted to the rivnut tool with an m10 mandrel.
FITTING THE RIVNUTthe rivnut is fitted to the post via the previously drilled hole and tightened by means of a spanner and rivnut tool. the rivnut now forms a threaded insert onto which a bracket can be securely attached.
* ALL DesiGns incoRPoRAtinG tHe LinX RAiLinG sYstem,
WitH oR WitHout suRfAce DecoRAtion, ARe PRotecteD
bY PAtent no. 2310441 coPYRiGHt / DesiGn RiGHt 1995.
linxRAiLinGTm
installation
bollards pg 46 gates pg 143parking pg 98
RAnGe
litter pg 253
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2010 Copyright Reproduction Prohibited
117
Linx
™ R
ailin
g
STAINLESS STEEL OPTIONSthe striking, clean-cut look of stainless steel makes it an ideal material for modern eye-catching designs. stainless steel is also extremely hardwearing, corrosion resistant, 100% recyclable and does not require a protective coating. instead it can be polished to either a satin or bright mirror finish.
in addition to its versatility for coping with site variations, the Linx system has also been adapted with a number of unique stainless steel cap designs. furnitubes worked with Haringey council to achieve a double-ringed variation of the Linx 200. the stainless steel cap complements the architectural Art Deco features of the nearby London underground station.
other variations include a single-neck Kenton-style cap and an Ashton cap in stainless steel. to discuss other possibilities please call a member of our dedicated design team.
linxRAiLinG
◄ LINX 300 Railing and Gate with FB14 Padlockwith Ashton stainless steel cap(see page 143 for gate options)
▲ LINX 100with Kenton single-neck stainless steel capwith etched graphics (special commission)shown here in Walthamstow
◄▼ LINX 200with stainless steel capsupplied to Wood Green, London
© 2010 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
118▼
LIN
X 4
00 ¾
GU
AR
DR
AIL
sat
in p
olish
ed s
tain
less
ste
el, i
nsta
lled
at H
amm
ersm
ith, L
ondo
n
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2010 Copyright Reproduction Prohibited
119
Linx
™ R
ailin
g
▲ LINX 400 2-Rail (special commission)stainless steel, glass bead blast finishinstalled in Hammersmith, London
▲ LINX 400 3-Railstainless steel, glass bead blast finishinstalled in Hammersmith, London
linxRAiLinGTm
composite railing system
the contemporary stainless steel Linx 400 guardrail system is a new addition to furnitubes revolutionary Linx range.
the stylish Linx 400 railing system is an ideal solution for modern areas, which can be enhanced with this sleek and flexible railing system, available in 100% stainless steel.
NO BRACKETSsimple in design, the rails are attached to unique curved plates which fit flush onto the posts in any position or angle. several options and combinations are available, including different material and cap options.
▲ KENTON CAPdetail
400 series
EXPLODED ASSEMBLYno BraCkeTS
Panels bolt straight onto the post, using riv-nuts and dome head bolts
SeCuriTy BolT
riv-nuT
STainleSS STeel kenTon Cap
poWder CoaTed poST & railinG
STainleSS STeel poST & railinG
OPTIONS■ mild steel, galvanised
■ powder coated mild steel
■ satin polished stainless steel
■ bright polished stainless steel
■ glass bead blast stainless steel
► LINX 400 ¾ GUARDRAILfinish options
© 2010 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
120R
AIL
ING
S
fRont eLeVAtion & GRounD LeVeL section 1:25
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
linx 100 guardrail range
euston post
lep 100 Fintermediate/corner Post for full Guardrail Panel
lep 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
knightsbridge post
lkp 100 Fintermediate/corner Post for full Guardrail Panel
lkp 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
ashton post
lap 100 Fintermediate/corner Post for full Guardrail Panel
lap 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
hale post
lHp 100 Fintermediate/corner Post for full Guardrail Panel
lHp 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
trafford post
ltp 100 Fintermediate/corner Post for full Guardrail Panel
ltp 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 100 guardrail range
euston base collar
eB 100
full guardrail panel
lFr 100 Panel for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:High Visibility PanelHigh Visibility PostRadiused Panel
trafford base collar
tB 100
3/4 guardrail panel
lQr 100 Panel & Rail for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:High Visibility PanelHigh Visibility PostRadiused Panel & Rail
additional joint assembly
lBr 100 Galvanised steel bracket complete with fixings
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:full panel - 2 joints 3/4 panel - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:full panel - 4 joints 3/4 panel - 6 joints.
Ø 115
Ø 115
Ø 115
375
1200
Ø 115
375
1270
Ø 115
Ø 155
150
1090
Ø 200
150
1090
375
1180
375
1275
375
1200
linx 100 series
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2010 Copyright Reproduction Prohibited
121
Linx
™ R
ailin
g
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:full panel - 2 joints 3/4 panel - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:full panel - 4 joints 3/4 panel - 6 joints.
linx 200 guardrail range
euston post
lep 200 Fintermediate/corner Post for full Guardrail Panel
lep 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
knightsbridge post
lkp 200 Fintermediate/corner Post for full Guardrail Panel
lkp 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
ashton post
lap 200 Fintermediate/corner Post for full Guardrail Panel
lap 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
hale post
lHp 200 Fintermediate/corner Post for full Guardrail Panel
lHp 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
trafford post
ltp 200 Fintermediate/corner Post for full Guardrail Panel
ltp 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 200 guardrail range
euston base collar
eB 200
full guardrail panel
lFr 200 Panel for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:Radiused Panel
trafford base collar
tB 200
3/4 guardrail panel
lQr 200 Panel & Rail for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:Radiused Panel & Rail
additional joint assembly
lBr 200 Galvanised steel bracket complete with fixings
375
1160
Ø 75
375
1170
Ø 75
375
1170
Ø 75
375
1220
Ø 75
375
1220
Ø 75
Ø 145Ø 115
150
1090
150
1090
linx 200 series
© 2010 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
122R
AIL
ING
S
fRont eLeVAtion & GRounD LeVeL section 1:25
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
knightsbridge post
lkp 300 Fintermediate/corner Post for full Guardrail Panel
lkp 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
ashton post
lap 300 Fintermediate/corner Post for full Guardrail Panel
lap 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
hale post
lHp 300 Fintermediate/corner Post for full Guardrail Panel
lHp 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
trafford post
ltp 300 Fintermediate/corner Post for full Guardrail Panel
ltp 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 300 guardrail range
euston post
lep 300 Fintermediate/corner Post for full Guardrail Panel
lep 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 300 guardrail range
euston base collar
eB 100
full guardrail panel
lFr 300 Panel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Radiused Panel
trafford base collar tB 100
3/4 guardrail panel
lQr 300 Panel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
additional joint assembly
lBr 300 cast bronze bracket complete with fixings
375
1180
375
1275
Ø 115
Ø 115
375
1200
Ø 115
375
1200
Ø 115
375
1270
Ø 115
Ø 200Ø 155
150
150
1090
1090
TeChniCal
materialfurnitubes cast iron, bronze and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.Junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:full panel - 2 joints 3/4 panel - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:full panel - 4 joints 3/4 panel - 6 joints.
linx 300 series
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2010 Copyright Reproduction Prohibited
123
Linx
™ R
ailin
g
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
linx 300 post & rail range
euston post
lep 300 r3intermediate/corner Post for 3-Rail
lep 300 r2intermediate/corner Post for 2-Rail
options:end Post
knightsbridge post
lkp 300 r3intermediate/corner Post for 3-Rail
lkp 300 r2intermediate/corner Post for 2-Rail
options:end Post
ashton post
lap 300 r3intermediate/corner Post for 3-Rail
lap 300 r2intermediate/corner Post for 2-Rail
options:end Post
hale post
lHp 300 r3intermediate/corner Post for 3-Rail
lHp 300 r2intermediate/corner Post for 2-Rail
options:end Post
trafford post
ltp 300 r3intermediate/corner Post for 3-Rail
ltp 300 r2intermediate/corner Post for 2-Rail
options:end Post
linx 300 post & rail range
euston base collar
eB 100
3-rail
l3r 300 Ø48 rails for 2m post pitch
trafford base collar
tB 100
2-rail
l2r 300 Ø48 rails for 2m post pitch
additional joint assembly
lBr 300 cast bronze bracket complete with fixings
TeChniCal
materialfurnitubes cast iron, bronze and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112 - 113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and rails are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.Junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:2 rail - 2 joints 3 rail - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:2 rail - 4 joints 3 rail - 6 joints.
Ø 115
Ø 115
Ø 115
Ø 115
Ø 115
Ø 200Ø 15
5
150
595
375
1200
375
1275
375
1180
375
1200
375
1270
1090
1090
linx 300 series
© 2010 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
124R
AIL
ING
S
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
linx 400 3-rail lnp 400 poststainless steel
l3r 415 panelto suit 1.5m Post Pitch
l3r 420 panelto suit 2m Post Pitch
TeChniCal
materialfurnitubes steel and stainless steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in stainless steel and supplied in a satin finish as standard.
linx 400 series
linx 400 3/4 guardrail range
lnp 400 poststainless steel
lQr 415 panelto suit 1.5m Post Pitch
lQr 420 panelto suit 2m Post Pitch
linx 400 full guardrail
lnp 400 poststainless steel
lFr 415 panelto suit 1.5m Post Pitch
lFr 420 panelto suit 2m Post Pitch
Ø 100
375
1135
Ø 100
375
1135
Ø 100
375
1135
optionsmild steel, GalvanisedPowder coated mild steelsatin Polished stainless steelbright Polished stainless steelGlass bead blast finish
optionsmild steel, GalvanisedPowder coated mild steelsatin Polished stainless steelbright Polished stainless steelGlass bead blast finish
optionsmild steel, GalvanisedPowder coated mild steelsatin Polished stainless steelbright Polished stainless steelGlass bead blast finish
fRont eLeVAtion & GRounD LeVeL section 1:25
1070
1070
1070
130
130
130
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2010 Copyright Reproduction Prohibited
125
Linx
™ R
ailin
g
1:25 fRont eLeVAtion & GRounD LeVeL section
rail
l1r 200 60 x 40 Knee-Rail for 2m post pitch
options:Radiused Rail
linx 100 knee-rail range
euston post
lek 100 intermediate/corner Post for Knee-Rail
options:end Post
knightsbridge post
lkk 100 intermediate/corner Post for Knee-Rail
options:end Post
ashton post
lak 100 intermediate/corner Post for Knee-Rail
options:end Post
hale post
lHk 100 intermediate/corner Post for Knee-Rail
options:end Post
trafford post
ltk 100intermediate/corner Post for Knee-Rail
options:end Post
rail
l1r 100 60 x 40 Knee-Rail for 2m post pitch
options:Radiused Rail
linx 200 knee-rail range
euston post
lek 200 intermediate/corner Post for Knee-Rail
options:end Post
knightsbridge post
lkk 200 intermediate/corner Post for Knee-Rail
options:end Post
ashton post
lak 200 intermediate/corner Post for Knee-Rail
options:end Post
hale post
lHk 200 intermediate/corner Post for Knee-Rail
options:end Post
trafford post
ltk 200intermediate/corner Post for Knee-Rail
options:end Post
linx 300 knee-rail range
euston post
lek 300 intermediate/corner Post for Knee-Rail
options:end Post
knightsbridge post
lkk 300 intermediate/corner Post for Knee-Rail
options:end Post
ashton post
lak 300 intermediate/corner Post for Knee-Rail
options:end Post
hale post
lHk 300 intermediate/corner Post for Knee-Rail
options:end Post
trafford post
ltk 300intermediate/corner Post for Knee-Rail
options:end Post
rail
l1r 300 Ø48 Knee-Rail for 2m post pitch
250
540
Ø 115
Ø 115
250
560
Ø 115
Ø 115
Ø 115
250
540
250
520
Ø 115
Ø 115
Ø 115
Ø 115
250
630
Ø 115
Ø 75 Ø 75 Ø 75 Ø 75 Ø 7525
058
0
450
250
635
250
560
250
630
450
250
530
250
580
250
530
250
560
250
635
250
560
450
linx 200 series
linx 100 series
linx 300 series
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.
TeChniCal
materialfurnitubes cast iron, bronze and steel railings are 100% recyclable.
Suitabilitybefore making your f inal guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and rails are manufactured in steel and supplied in a galvanised f inish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.Linx 300 junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & f ixings.
to convert an intermediate post to a 3-way post, 1 additional joint assembly is required.
to convert an intermediate post to a 4-way post, 2 additional joint assemblies are required.