11002 LEDISONS 16pp BROCHURE aw Layout 1 · small blinking lights that we often see on electronic...

C O M M E R C I A L L I G H T I N G

Commercial Lighting | Ledison Lighting

ABOUT US

Ledison Lighting is a UK

owned and run online business

dedicated to supplying quality

LED lighting products for your

home and business.

Ledison Lighting provides you with a

variety of LED Lighting products of

high quality world renowned brands at

highly competitive prices. It is our

priority to bring to you only top quality,

long lasting LED Lamps. Our product

range (Ledison) is manufactured by

our factory that uses strictly quality

control policies.

There is no doubt that LED Lighting is the future of lighting.It is also the best investment for your

home and business.

Contents

Section Page

Why LEDs? ............................................... 3

High Bay Light ...................................... 4 - 7

Applications ............................................... 6

Environmentally Friendly ........................... 7

LED Fluorescent Tubes ........................ 8 - 9

PL G24 Horizon Downlight ................. 10 - 11

PLC LED Light ........................................ 12

Energy Savings with LED Tubes .............. 13

MR16 LED Spot Lights ...................... 14 - 15

LED Street Lights .............................. 16 - 17

Manufacturing ............................................ 18

Advantages of LED Lighting ...................... 19

www.ledison-led-lights.co.uk2


Ledison Lighting | Commercial Lighting

This has led to a new range of LED lights for domestic andcommercial use sharing the followingcharacteristics:

◗ Choice of light - warm white, neutralwhite, cool white

◗ High efficiency - typically 70-80%savings

◗ Long life - up to 35 times longer thanan incandescent bulb

◗ Contains no lead or mercury

◗ Instant startup, so no initial dimnessor flicker

◗ No RF interference or buzzing noise

◗ Quick and easy installation

WHY LEDs?

43

The new energy

efficient light source.

So 'Why LEDs?' - Light

Emitting Diodes (LEDs) have

been around for many years,

but in the past they were

confined to mundane

applications such as the

small blinking lights that we

often see on electronic

equipment.

Developments over the years

have led to increasedefficiency, increased power

output and more generally

acceptable light quality for

general lighting purposes.

Email: [email protected] Tel: +44 (0)7795436749 | +44 (0)2476550216


COMMERCIALLIGHTING

E B F 1 W – 1 2 0 0

X1 X2 X3 X4 X5 X6 X7 X8

X1 Product X2 Model X3 Type X4 Reflector X5 Colour X6 Watt X7 Field Angle X8 Serial No.

CODE TYPE CODE TYPE CODE TYPE CODE TYPE CODE TYPE CODE TYPE CODE TYPE CODE TYPE

E Ledison B Bay F AI-FIN 0 No Cover W Cool White 12 120W 0 90º

1 AL H Neutral White 1 40º

2 PC X Warm White 2 60º

3 120º

4 140º

Available Colours and Wattage

COLOURS & WATTAGE

HIGH BAY LIGHT

www.ledison-led-lights.co.uk

Solid State Lighting Technology

Superior Quality Light

Energy Saving (120Watt only)

Replaces 400Watt Mercury

Vapor Lamp

Long Lifetime

IP65 for AL Reflector

HIGH BAY II Light

4

FEATURES

High Bay II with AL Reflector (IP65)

DIMENSIONS

High Bay II with AL Reflector

Note: 1. Unit: mm / 2. Tolerance: ± 5.0mmNote: 1. Unit: mm / 2. Tolerance: ± 5.0mm

High Bay II with AL Reflector (IP65) High Bay II with AL Reflector


SPECIFICATIONS

SPECIFICATIONS

The following describes the

choices of colour temperature,

angles and CRI of High Bay II for

different demand.

Note:1. Power consumption has 5% tolerenace.

2. Thermal equilibrium at 50ºC ambient.

PowerPart No. CCT Field Angle Flux (Type)Consumption

EBF1W-121x 5300~6300K 40º 6500 lm

EBF1H-121x 3800~4500K 40º 5300 lm

EBF1X-121x 2800~3200K 40º 4500 lm

EBF1W-122x 5300~6300K 60º 7300 lm

EBF1H-122x 3800~4500K 60º 6000 lm

120 Watt EBF1X-122x 2800~3200K 60º 5200 lm

EBF1W-120x 5300~6300K 90º 7600 lm

EBF1H-120x 3800~4500K 90º 6200 lm

EBF1X-120x 2800~3200K 90º 5400 lm

EBF1W-123x 5300~6300K 120º 7300 lm

EBF1H-123x 3800~4500K 120º 6000 lm

EBF1X-123x 2800~3200K 120º 5200 lm

HIGH BAY II with AL Reflector (IP65)

Luminous flux of 120 Watt High Bay II

PowerPart No.

Lux@ 4m Lux@ 6m Lux@ 8m Lux@ 10m Lux@ 12mConsumption (Type) (Type) (Type) (Type) (Type)

EBF1W-121x 1200 530 290 185 125

EBF1H-121x 950 420 230 145 100

EBF1X-121x 850 360 205 125 90

EBF1W-122x 730 310 175 110 75

EBF1H-122x 580 253 135 85 60

120 Watt EBF1X-122x 500 210 125 75 55

EBF1W-120x 600 260 145 95 65

EBF1H-120x 480 210 115 65 50

EBF1X-120x 420 180 100 660 45

EBF1W-123x 340 145 80 50 35

EBF1H-123x 270 120 65 40 26

EBF1X-123x 230 95 55 35 23

Lux with different distance for 120 Watt High Bay II

PowerPart No. CCT Field Angle Flux (Min.) Flux (Type)Consumption

EBF2W-120x 5300~6300K 140º 6500 lm 7200 lm

120 Watt EBF2H-120x 3800~4500K 140º 5400 lm 5900 lm

EBF2X-120x 2800~3200K 140º 4600 lm 5200 lm

HIGH BAY II with PC Reflector

Luminous flux of 120 Watt High Bay II

PowerPart No.

Lux@ 4m Lux@ 6m Lux@ 8m Lux@ 10mConsumption (Type) (Type) (Type) (Type)

EBF2W-120x 225 90 55 36

120 Watt EBF2H-120x 185 75 45 28

EBF2X-120x 130 60 38 25

Lux with different distance for 120 Watt High Bay II

Description Rating Units

Power Consumption 120*1, 2 W

Al Reflector Field Angle 40 / 60 / 90 / 120 Degree

PC Reflector Field Angle 140 Degree

Colour Temperature 5300~6300 / 3800~4500 / 2800~3200 K

CRI 68 / 75 / 80 /

Weight (EBFxx-12xx) 3.3±0.2 kg

Weight (EBF2x-12xx) 2.5±0.2 kg

HIGH BAY II Specifications

ILLUMINANCE SPECIFICATIONS

45



APPLICATIONS



High Bay lighting product

applications for your business.

Ledison Lighting provides you with a

variety of LED Lighting products of

high quality world renowned brands at

highly competitive prices. It is our

priority to bring to you only top quality,

long lasting LED Lamps. Our product

range (Ledison) is manufactured by

our factory that uses strictly quality

control policies.

There is no doubt that LED Lighting is the future of lighting.

ENVIRONMENTALLY FRIENDLY

47



120Watt HIGH BAY II Versus a 400Watt Mercury Vapor Lamp (EUR)

120Watt HIGH BAY II Versus a 400W Mercury Vapour Lamp

Power Reduction by 70% Saves 92 trees a yearReduction of CO2

Emission by 1286kg

120Watt HIGH BAY II Versus a 400Watt Mercury Vapor Lamp (KWh)

Note: Calculation based on 24 hours of daily operation.

= =

High Bay II with AL Reflector (IP65)

1000

2000

3000

4000

1100

EUR

740

370

0 1 2 3 4 Year

KWh

01 Year

3456

1037

70%

Mercury Vapour Lamp (400W)

High Bay (120W)

Mercury Vapour Lamp (400W)

High Bay (120W)

Saves EUR 170

Saves EUR 330

Saves EUR 10

Saves EUR 490


LED FLUORESCENT TUBES


LED FLUORESCENT Tube ReplacementFEATURES

DIMENSIONS

LED Fluorescent Tube (Frosted) LED Fluorescent Tube (Clear)

Notice:Sided Power Supply. This type of LEDISON LEDtube operates with a wide range

of AC voltage (90-276VAC). The starter and inductive (or electronic) ballast must be

removed. Refer to LEDISON LEDtube “instructions manual” for more information.

Part No. A1 A2 A3 D1 D2

T8-6011- 590 597 604 24.8 / 23.6 27.3 / 28

T8-9014- 890 897 904 24.8 / 23.6 27.3 / 28

T8-12020- 1200 1207 1241 24.8 / 23.6 27.3 / 28

T8-15022- 1500 1510 1514 24.8 / 23.6 27.3 / 28

T8-18026- 1760 1767 1774 24.8 / 23.6 27.3 / 28

Luminance of LED Tube T8 150cm 22Watt

PHOTOMETRIC DATA

Disclaimer:The data of the light output is only from Ledison test reports. It may diverge from

another results or sources if the tubes are tested under different equipment or

test methods.

Distribution Curve

of Meridian

LED Fluorescent Tube (Striated)

Illumination Cone

cd/1000 lm Curve

Up to 50,000 hours lifetime

Longer lifetime than conventionalfluorescent tube (4-5 times longer)

High colour rendering CRI over 80,compared to 65

70% energy saved over conventionalfluorescent tube

Quick and easy installation to minimizeretrofit costs

Excellent property of shock-resistant

No hazardous materials, mercury free

Applicable Standards & Certificates: CE &RoHS, TUV, UL, EMC

No RF interference, no buzzing noise, no flickering

LEDs reach a typical efficacy of100+ lumens

More robust and resistant to coldenvironments than normalfluorescent tubes

Typical Brightness loss: 70%maintains after 35,000 hours

5 YEAR WARRANTYon all our LED Tubes

Conical Intensity

Distribution

Curve

LED FLUORESCENT TUBE Dimensions (mm)

49

SPECIFICATIONS


SPECIFICATIONS

Abbreviations:

WW: 2800-3200K

NW: 4000-5000K

CW: 5500-6500K

H: High brightness version

C: Clear lens

F: Frosted lens

DS: Double sided Supply (mains voltage applied across the tube, starter & ballast must be removed)

Note:Test reports and photometric data of the completeproduct range are available on request.

Mechanical600mm (2ft) 900mm (3ft) 1200mm (4ft) 1500mm (5ft) 1800mm (6ft)Specification

Weight 165g 280g 340g 400g 480g

Housing / Cover Anodised Aluminium / Polycarbonate

Tube Diameter 26mm & 28mm

Fitting G13 bi-pin (13mm between pins)

Work Environment Dry environment (Indoor use only, special IP65 cover required for outdoor)

Warranty 5 years

Certification CE, FCC, ROHS, TUV

LED FLUORESCENT TUBE Mechanical Specifications

Part No. Size Diameter Power (Watts) Flux LM

T8-6011-WW/NW/CW-C/F-DE 600mm 28mm 11W 1000-1100lm








LED FLUORESCENT TUBE Complete product range

Electrical600mm (2ft) 900mm (3ft) 1200mm (4ft) 1500mm (5ft) 1800mm (6ft)Specification

LED Quantity 180 225 336 375 456

Power Consumption 11W±2W 14W±2W 20W±2W 22W±2W 28W±2W

Input Voltage 90-276V

LED Volts, Amps 36-40VDC, 16-18mA

Power Factor >0.95

Drive Efficiency 91%

Dimmable No

Light Source SMD 3528, Everlight

Operating Temp. Ambient -20 to +50ºC

LED FLUORESCENT TUBE Electrical Specifications

Optical600mm (2ft) 900mm (3ft) 1200mm (4ft) 1500mm (5ft) 1800mm (6ft)Specification

Clear (lm) 1100 1400 2100 2250 2800

Striated (lm) 1000 1300 2000 2150 2700

Frosted (lm) 900 1200 1900 2000 2600

CRI ≥ 70 Ra

Colour Temp. (K) Warm White - 2700~3200K

Natural White - 4000~5000K

Cool White - 5500~6500K

Beam Angle 120-140 deg.

Lumen Maintenance 99% after 4,000 hours, >70% after 35,000 hours

Efficiency 100lm/W

LED Life Expectancy Over 50,000 hours

LED FLUORESCENT TUBE Optical Specifications

OTHER KEY FEATURES

LED Chips SMD3528 and 3014 from

renowned manufacturers Everlight,

Lumenmax Philips Lumiled

Rotating end caps

LED Tubes are repairable

Dimmable version available

Length LED watts Ordinary Fluorescent Tube

2 ft, 600 mm 8W & 10W retrofit replacement for more than 18W

3 ft, 900 mm 12W &14W retrofit replacement for more than 30W

4 ft, 1200 mm 18W & 20W retrofit replacement for 36W & 40W &45W

5 ft, 1500 mm 22W & 25W retrofit replacement for 56W & 60W

6 ft, 1800 mm 26W & 30W retrofit replacement for more than 70W

LED FLUORESCENT TUBE Equivalent LED Retrofits


LEDISON LEDtubesOrdinary fluorescent

DIMENSIONS

Code A B C D E

SIZE & CODE

Size 120±1mm 140±1mm 155±1mm 170±1mm Gx23 G23d G24d G24q

PL HORIZON DOWNLIGHT G24



Our LED Bulb can save up to 80% in

energy compared to Halogen and

Incandescent lighting as well as

reduce the typical replacement and

maintenance expense

associated with outdated energy

wasting Halogen, Incandescent & CFL

Bulbs. They can generate equivalent

or much higher light output than the

incandescent lamps with much lower

power consumptions. With long

lifetime of over 35,000hours then

hardly need any maintenance costs.

G23 | G24 Frosted LED downlights adopt high brightness Nichia

LEDs with frosted lens and dedicated LED drive, which ensure

not only high lumen output with uniformity and consistency, but

also high efficiency and cool running temperature. The frosted

LED light can create a wonderful lighting effect which is totally

equivalent to the CFLs with just 50% power consumption as

CFL’s therefore they are the optimum replacement.

PL HORIZON Downlight (G24)FEATURES

G24 Horizon Downlight

PL HORIZON DOWNLIGHT G24

SPECIFICATIONS

411



SPECIFICATIONS

Part No. Base Dimensions Lumens Light Source Input Voltage Beam Angle

PL-0704-N-X G23 / G24d-1 / G24q-1 W36 x L120mm 480lm Nichia SMD3528 90-260VAC 120 deg.




DIMENSIONS (mm)

MechanicalDescriptionSpecification

Light Source SMD Nichia

CRI >76

CCT 2800~3200K, 3800~4000K, 5700~6150K, 6150~6500K

Luminous Efficiency 90.2lm per Watt

Power Factor 0.9

Fitting G23, G24d-1, G24q-1, E27

Lifetime >35,000 hours

Operating Temp. -20 up to +40 degrees degrees C

Humidity 5% - 95% RH

Housing Material Aluminium

Protection Rating IP20

Body Temperature 50ºC

PL HORIZON DOWNLIGHT (G24) Electrical Specifications

Replaces Fluorescent PLC:

E14, E26, G23, G24

(2 pins, 4 pins)

PL HORIZON DOWNLIGHT (G24) WITH FROSTED LENS

PL HORIZON DOWNLIGHT (G24) WITH FROSTED LENS

Available in G24d-1 two pin and G24q-1 four pin base types

Longer life than incandescent & fluorescents. No mercury, no ballast required, wide voltage and constant current design. 50% savings inenergy consumption - a perfect solution for hospital lighting, home lighting, office lighting, boat lighting, commercial lighting and task lighting.

5 YEAR WARRANTY on all our LED Tubes

PLC LED LIGHT



The LEDISON PL Light offers

unbeatable combination of efficiency,

luminous flux (800lm) and the highest

Colour Rendering Index. LEDISON PL

provides beautiful light at a low energy

cost making it a more than capable

replacement for its incandescent and

fluorescent counterparts. The high

performance aluminium heatsink is

capable of removing more heat from

the LED, increasing the performance

and life time. The PL bulb are

assembled with the Lumenmax and

Philips chips, the leaders in LED Light

sources

PLC LED LightFEATURES

PLC LED Light

MechanicalDescriptionSpecification

Light Source SMD Philips lumiled, SMD 3014

CRI >80

CCT 2800~3200K, 3800~4000K, 5700~6150K, 6150~6500K

Luminous Flux 800lm

Power 80LED x 0.1Watt

Power Factor 0.9

Fitting Refer to fitting options below

Lifetime >50,000 hours

Operating Temp. -20 up to +40ºC

Humidity 5% - 95% RH

Housing Material Aluminium

Protection Rating IP20

Body Temperature 50ºC

PLC24-0608-PH PLC LED LAMP Mechanical Specifications

SPECIFICATIONS: PLC24-0608-PH

FITTING OPTIONS

5 YEAR WARRANTY on all our LED Tubes

Rotates 360˚

413

ENERGY SAVINGS


Example of Energy Savings with LED Tubes

Description Traditional Fluorescent Tube LEDISON LED Tube

Power Consumption – per tube 73W (58W+15W ballast) 22 Watt

Power Consumption – 100 tubes 7,300 Watt 2,200 Watt

kWh consumption 31,974kWh 9,636kWh

Cost in £ £4,796 £1,445

Cost in € €5,755 €1,734

Life Span 4 years 15-17 years

The following table show a case study of 100 LED Tubes. The old

fashion and uneconomic fluorescent tubes are replaced by 150cm(5ft)

22 Watt LEDISON LED tubes.

* Based on 12 hours operation per day, 365 days, cost of electricity £0.15/kWh, €0.18/kWh

Your savings per year £3,351 or €4,021

Total Spend per year Fluorescent Vs. LED

The measurement shows that there

is not reactive power which means

that the LED Tubes can operate with

nearly unity power factor (ordinary

fluorescent tubes operate with 0.6-

0.7 power factor resulting in more

waste of energy)


5000

4500

4000

3500

3000

2500

2000

1500

1000

500

0

Your lighting spend on tube

lights per year

Your lighting spend with LED

tubes per year

£

MR16 LED SPOT LIGHTS (GU10)



Small and efficient, but still retains the

classic features of halogen lamps.

LEDON's halogen replacement has

that "something extra" - impressive

energy-saving LED technology and

outstanding lighting quality. LEDON's

LED lamps in the typical MR16 style

enhance your personal lighting

experience.

MR16, GU10 (230V)FEATURES

LEDON 5W & 7W Pharox 6W

SPECIFICATIONS

MR16 5W/35D/827 GU10 230V 5w 35˚ 230lm 2700k 80 25,000 No

MR16 5W/35D/827 GU10 230V (DIM) 5w 35˚ 230lm 2700k 80 25,000 Yes

MR16 5W/25D/827 GU10 230V 5w 25˚ 230lm 2700k 80 25,000 No


MR16 7W/35D/827 GU10 230V 7w 35˚ 320lm 2700k 80 25,000 No


MR16 7W/25D/827 GU10 230V 7w 25˚ 320lm 2700k 80 25,000 No


MR16, GU10 (230V) Complete product range

Power Beam Luminous ColourCRI

LifetimeLEDON

(Watts) Angle Flux Temperature (Hours)Dimmable

MR16 Pharox 300 GU10 230V 6w 40˚ 280lm 3000k 80 40,000 No

Power Beam Luminous ColourCRI

LifetimePHAROX

(Watts) Angle Flux Temperature (Hours)Dimmable

PHOTOMETRIC DATA 25˚ Beam Angle

MR16 LED SPOT LIGHTS (GU5.5)

415



LED MR16 light bulb equivalent to a

35W halogen MR16. Perfect spotlight

solution for residential, commercial

and public applications. Pharox MR16

offers a cost-effective, environmentally

friendly and safe LED alternative to the

outdated halogen MR16 light bulbs.

Consuming seven times less energy

than an average equivalent halogen

lamp, the Pharox MR16 produces

bright, warm white light with high color

rendering index, and well-controlled,

high-intensity, 38 degree angle beam,

making it a perfect lighting solution for

directional lighting applications

including residential accent, spotlight

and track lighting, as well as

commercial and public applications

such as display lighting in museums,

art galleries, retail stores, and

entertainment venues. Additionally,

the 35,000 hour lifetime of the Pharox

MR16 - over ten times the longevity

of average comparable halogen bulb -

effectively eliminates the need for

future replacement, translating into

lower maintenance and life-cycle

costs.

MR16, GU5.3 (12V)FEATURES

LEDISON 5.5W & 7W Pharox MR16 5.5W

LEDISON MR16, GU5.3 5W & 7W (12V) Specifications

MR16, GU5.3 / 5.5 / 7W (12V) Complete product range

SPECIFICATIONS

Fitting GU5.3 GU53

Wattage (rated) 5 Watt 7 Watt

Voltage 12Volt 12Volt

Line frequency 50/60Hz 50/60Hz

Average lifetime 35,000 hours 35,000 hours

Colour Temperature:

Warm white 3100K 3000K

Natural white – –

Beam Intensity 1000Cd 1100Cd

Operating Temp. -40 OC to 50 OC -40 OC to 50 OC

Luminous flux >240lm >450lm

Colour Rendering index >85 >80

Typical Efficacy 43lm/W 62lm/W

Beam Angle 40 deg 30 deg

Net Weight per piece 38g 76g

Diameter 50mm 50mm

Height 45mm 48.5mm

Dimmable YES YES

Warranty 3 years 3 years

Certification ROHS Compliant, CE,UL

PHAROX MR16, GU5.3 (12V) Specifications

Fitting GU5.3

Wattage (rated) 5 Watt

Voltage 12Volt

Line frequency 50/60Hz

Average lifetime 35,000 hours

Colour Temperature:

Warm white 3100K

Natural white –

Beam Intensity 400Cd

Operating Temp. -40 OC to 50 OC

Luminous flux >280lm

Colour Rendering index >85

Typical Efficacy 57lm/W

Beam Angle 35 deg

Net Weight per piece 38g

Diameter 50mm

Height 45mm

Dimmable YES

Warranty 5 years

Certification ROHS Compliant, CE,UL

Pharox MR16, GU5.3, 12Vac, 5W Ledison MR16, GU5.3, 12Vac, 5.5W

Ledison MR16, GU5.3, 12Vac, 6.5W Ledison MR16, GU5.3, 12Vac, 7.0W

Ledison Spot lightHalogen (old fashion) lights


LED STREET LIGHTS


LED Street LightsFEATURES

LED STR-M30 LED STR-30

LED STR-115 LED STR-C160

Light source

Use world-class first level leds, which

are original Cree or Philips Lumileds,

of high quality, long life span,

outstanding color uniformity, good

stability and reliability, good lumen

output maintenance, and good visual

effect, with better energy saving

feature than leds from China Taiwan

or mainland.

Electronic components

Use world-class first level components

to make sure very high and reliable

quality. For example, PCB board and

thermal pads come from USA with

good coefficient of heat conductivity

and high efficient heat release,

(thermal pads is Dow Corning brand

from USA). For the driver, capacitor is

Japan Rubycon and IC is U.S.

National Semiconductor, which are

both considered as the best worldwide

in their fields because of the high and

reliable performance.

Driver Design

Special design with licensed patents,

addable with intelligent management

function including Light Controlling,

Time Controlling and Temperature

Controlling.

Light Controlling

Special design with licensed patents,

addable with intelligent management

function including Light Controlling,

Time Controlling and Temperature

Controlling.

Temperature Controlling

When temperature of heat

dissipation part exceed 55°C, the

driver will automatically lower the

current by 30% to protect the LED to

make sure the stable working status

and ensure the lamp life span. When

the temperature resume to below

50°C, the current will resume

accordingly to normal level. When

temperature of heat dissipation part

exceed 70°C, the driver will

automatically lower the current by

50% to protect the LED to make sure

the stable working status and ensure

the lamp life span. original level.

When the temperature resume to

below 50°C, the current will also

resume to

Lens options

Several lens option for choice,

suitable for different road

application and project

requirement; bat wing rectangular

beam suitable for road illumination,

well improve the lumen output and

also make sure the high uniformity.

Good lens quality

Light transmittance rate of lens is

more than 92% to make sure high

output. Lens material is UV-

resistant to prevent the lens goes

yellowish because of the solar

ultraviolet to sustain the stable

output level.

5 YEAR WARRANTY on all our LED Street Lights

Strength of our LED Street Light

417


SPECIFICATIONS


SPECIFICATIONS

STREET LIGHTS COST COMPARISON

OTHER KEY FEATURES

Adjustable mounting angle ±150

Rotating end caps

Cable connection area reserved,

convenient wiring

Light sensor, automatically switch

ON/OFF

Time – phases dimming available,

saving further energy

Temperature control by

automatically reduce current agains

overheating temperature, ensure

safe working environment for LED

and prolong lamp’s life

Lamp’s connection with remote

control system available,

computerised control switch

ON/OFF, 0-100% dimming and

detecting failure automatically.

LEDISON LED street light item # Replacement of traditional lamp

STR-30W to use in a shade Replacement 70W HPS lamp.

STR-30W Replacement 70W HPS lamp.

STR-36W Replacement 70-100W HPS lamp.







LED STREET LIGHT 4*6 module

LEDISON LED street light item # Replacement of traditional lamp




LED STREET LIGHT Single lens type

STR-30W 30w 2200lm

STR-36W 36w 2500lm

STR-48W 48w 3500lm

STR-58W 58w 5400lm

STR-85W 85w 7000lm

STR-115W 115w 9200lm

STR-160W 160w 13600lm

STR-175W 175w 18000lm

STR-230W 230w 24000lm

STR-340W 340w 27500lm

LED STREET LIGHT Power rating and lumens

Power (Watts) Luminous Flux

Quantity 500 500

Cost 75 GBP 401 GBP

Total Power 500kW 175kW

Daily Consumption 3,078kWh 797.82kWh

Annual Consuption 1,123,341kWh 291,204kWh

10 Year Consumption 11,233,412kWh 2,912,036kWh

Monthly Electricity cost £9,234.00 £2,393.46

Annual Electricity cost £110,808.00 £28,721.52

10 year Electricity cost £1,108,080.00 £287,215.20

Total Savings £820,864.80

Life span 1 - 2 years 10 years

Maintenance cost for 10 years £110,000.00 £0.00

Payback period 4 years

Between LED street lights and High pressure sodium lamps

HPS 400W LEDISON STR-144

Based on 12hrs per day.

LED street light working with full power at first 6hrs and 50% power for the last 6 hrs

Lemnis Lighting develops the Pharox

line of led lamps from the philosophy

that sustainable lighting needs to be an

improvement over existing technologies

that does not require a sacrifice on the

user’s end.

The Pharox led-lamp proves that it’s

possible: a light bulb that lasts longer,

does not contain mercury and that fits a

standard fitting. Using the Pharox led-

lamp, consumers and businesses can

start contributing to a more sustainable

world, today.

Lemnis Lighting is based in Holland

LEDON Lamp GmbH concentrates on

developing, producing and marketing

highly efficient LED lamps. As a wholly-

owned subsidiary of stock-market listed

Zumtobel AG, Austria, LEDON Lamp

reaps the benefit of the whole group's

extensive technical expertise.

LEDON's LED lamps feature innovative

lighting technology and are ideal

replacements for traditional

incandescent lamps and available CFL

energy-saving lamps. These retrofit

lamps echo the shape of traditional

lamps styles. Excellent lighting quality

and energy savings of up to 85% make

LEDON lamps equally attractive in both

environmental and social terms.

LEDON is based in UK and Austria

MANUFACTURING

Ledison Lighting is the official distributor of the following Award

Winning manufacturers in LED Lighting industry:



ADVANTAGES OF LED LIGHTING

Advantages of Ledison LED Tube Lights

419



● Technological Advances

◗ The advancing pace in Solid StateLED’s is rapid.

◗ Future product development willtransform electric lighting forever.

◗ LED tube lights save around 70%of the energy used for fluorescent

lights!

◗ The initial cost is recoverable injust the energy cost savings within

1-2 years!

● Cost Savings

◗ A 1200mm LED Tube light uses18w of power.

◗ A regular 1200mm tube light uses48w of power.

◗ A 1200mm LED tube light savesover 30w.

◗ Additionally, they last up to 5 timesas long, which saves in labour

costs and scheduled maintenance.

◗ And energy costs are still risingrapidly... Of course, every

installation is different. We always

analyse your savings specifically.

● Additional Advantages

◗ In the workplace, directional lightis better.

◗ 60% of light from a FluorescentTube light goes into roof space or

onto walls!

◗ The Daylight white light fromLED’s can help prevent SAD

(Seasonal Affective Disorder).

◗ Much better for people who sufferfrom fits, and can have adverse

reactions to fluorescent lighting.

● Solutions For Your Requirements

◗ Ledison Lighting will specify thebest energy saving combination of

lighting for your installation.

◗ Whilst we focus on LED TubeLights, we provide a full

complement of lighting solutions

to reduce your energy

requirements with minimum cost

and disruption.

● Technical Considerations

◗ Switch on instantly, so sensorscan be fitted for even greater

savings.

◗ LUX and relative performanceincreases with height, due to

LED’s directional light beam

consistency.

◗ Highly stable operating voltagefrom 65v to 240v AC.

◗ 50% aluminium heat-dissipatingconstruction, for longevity of

LED’s.

◗ Inserting LED tubes intofluorescent fittings will require

slight Modification.

◗ Assembled mechanically forconsistent reliability.

◗ CE standards and RoHS safetycompliant.

◗ Manufactured in a high qualityISO9001 and ISO14001 compliant

factory.

◗ Complaint with EMC tests toEN55105, FCC standards.

◗ High temperature solderingemplayed (230°C - 265°C) for

guaranteed stability and longevity.

● Recap

◗ LED Lighting.

◗ Contains no mercury – safer touse, simpler to dispose.

◗ Saves an extra 60% energy over“energy saving” tubes.

◗ Reduces your carbon footprint.

◗ Lasts 5 times as long for lowermaintenance costs.

◗ Less heat generated, and no UVin the light beam.

◗ Incredibly bright, white, flicker-freelight helps prevent SAD and

epileptic fits.

◗ The directional beam means lightgoes where you need it.

◗ Switch on instantly, so sensorscan be fitted for even greater

savings.

◗ Pays for itself in as little as 2years, from energy savings alone.

CONTACT USLedison Lighting

5 Argosy Court

Scimitar Way

Whitley Business Park

Coventry, West Midlands

CV3 4GA

UNITED KINGDOM

Email: [email protected]

Tel:+44 (0)7795436749 | +44 (0)2476550216

Our opening hours are 9.00am to 5.30pm Monday to Friday

www.ledison-led-lights.co.uk

Company Registration: 7524135

VAT Number: GB110593740

Ledison Lighting is a trade name for VOLTACON UK Limited.

Technomechanics LimitedΤεχνοΜηχανική Κατασκευαστική Ε.Π.Ε.

Β' Demokratias 25, Πefka

57010, Thessaloniki

Greece

Tel: +30 2310 357552

Fax: +30 2310 357552

www.ledgr.gr

Ledenergy.beIng. Pieter Vanyzere

Hoogstraat 82A

8780 Oostrozebeke

Belgium

Tel: +32 (0)497/57.66.82

www.ledenergy.be

Distributors



11002 LEDISONS 16pp BROCHURE aw Layout 1 · small blinking lights that we often see on electronic...

Documents

Transcript of 11002 LEDISONS 16pp BROCHURE aw Layout 1 · small blinking lights that we often see on electronic...