102000ELMTO901B

7/30/2019 102000ELMTO901B

1/6

No. Voltage (U0/U) Type Standard Size ( mm ) Length (m) Power/Control

1 6/10kVCU/XLPE/SWA/PVC

(Fire Resistant) IEC 60502 3C50 8 Power

2 0.6/1kV CU/PVC/PVC IEC 60502 4C4 100 Power

3 0.6/1kV CU/PVC/PVC IEC 60502 3C2.5 210 Power

4 0.6/1kV CU/PVC/PVC IEC 60502 4C2.5 90 Power (Note 1

5 0.6/1kV CU/PVC/PVC IEC 60502 14C2.5 60 Control




NOTE:

1.This cable is for suppying Raw Water Motor Operated Valve from WTP MCC Panel.

ELECTRICAL POWER AND CONTROL CABLE LIST

B

B

1020-00-EL-MTO-901, rev.B Page 4 of 9

7/30/2019 102000ELMTO901B

2/6

Gland

Quantity

Ind.

3 Core 50 mm

Cu/XLPE /SWA/PVC

4 Core 4 mm

Cu/PVC/PVC

4 Core 2.5 mm

Cu/PVC/PVC

3 Core 2.5 mm

Cu/PVC/PVC

2 Core 1.5 mm

Cu/PVC/PVC

14 Core 2.5 mm

Cu/PVC/PVC

7 Core 2.5 mm

Cu/PVC/PVC

5 Core 2.5 mm

Cu/PVC/PVC

NOTES:

Armor

Dia.

(mm)

Gland

SizeCable Sizes and Type

Outer

Sheath

Dia. (mm)

3 15 ____ M25

Shroud

Quantity

Earth

Tag

1 61 2.5 M63 1

No.

1 1

4 14 M20____

2 16 ____ M25 8

9

12 8

16 ____

1 ____ 2

21 ____

5 13

M32 4

____ M20 2

4. Cable Glands shall have shroud. The shrouds shall be made of molded polychloroprene

(PCP) or similar flexible material for extra protection against corrosion and water ingress.

1.Cable Glands shall be made ofBrass complying with the requirements ofBS 2874.

2.Cable glands with metric thread shall be provided with lock nut.

3.Degree of protection (without shrouding) shall be IP66.

LIST OF CABLE GLAND AND SHROUD

____ ____

____ ____

6

4 ____ ____ 7 16 ____ M25

4 ____ ____ 8 16 ____ M25

B

B

B


7/30/2019 102000ELMTO901B

3/6

No. Material Specification Quantity

1 7.2kV(m (350mm 2 Sets

2 4 4 60 PCs

3 2.5 2.5 60 PCs

4 2.5 2.5 230 PCs

5 50. 200 PCs

6 30. 100 PCs

7 4 12 Sets

8 2.5 20 Sets

LIST OF CABLE ACCESSORY


7/30/2019 102000ELMTO901B

4/6


1 Cable Tray Perforated, hot dip galvanized steel cable tray with thickness 2 mm,without cover Dimensions (WH): 400 100 mm 24m

2 Cable Tray Cover Galvanized steel cover with 1 mm thickness for item no. 1 Cable tray

dimensions (WH): 400 100 mm24m

3 Cable TrayPerforated, hot dip galvanized steel cable tray with thickness 2 mm,

without cover Dimensions (WH): 300 100 mm36m











9 90 Horizontal Bend L type, WH: 400 100 mm 3 PCs




13 Tee connection WH: 400 100 mm 1 PCs

14 Tee connection WH: 300 100 mm 1 PCs

15 Straight Reducer WH: 400 100 mm to WH: 300 100 mm 1 PCs

16 Inside Elbow (Up riser) WH: 400 100 mm 2 PCs

17 Inside Elbow (Up riser) WH: 300 100 mm 1 PCs

18 Outside Elbow (Down comer) WH: 400 100 mm 1 PCs

19 Outside Elbow (Down comer) WH: 300 100 mm 1 PCs

20 Straight Joint Suitable for WH: 400 X 100 mm Cable trays 40 PCs

LIST OF CABLE TRAY AND ACCESSORY


7/30/2019 102000ELMTO901B

5/6

LIST OF CABLE TRAY AND ACCESSORY




24 Fixing AccessoriesM6 X 25 round head bolt/nut with 1-spring, 2-flat washers for fixing

cable tray on steel structure. Material: galvanized steel250 PCs

NOTE:

1.All cable tray accessories and covers shall be provided with necessary bolts and nuts.


7/30/2019 102000ELMTO901B

6/6


1 Flat copper tape 505 mm Flat copper tape 505 mm 130m

2 Earthing Wire 185 mm Yellow / Green PVC insulated stranded copper wire 185 mm 15m






8 Earthing Wire Flexible copper Earthing bond L=200 mm , 16 mm 4 PCs

9 Support Support for Flat copper tape for fixing to wall 80 PCs

10 Copper tape connection Cross tape connection clamp 2 PCs

11 Joint Tape clamp 50 PCs

12 Cable Lug 185 mmOne hole, tinned copper, purity 99% cable lug for 185 mm wire,

with galvanized steel bolt, nut and washers4 PCs

13 Cable Lug 95 mmOne hole, tinned copper, purity 99% cable lug for 95 mm wire, with

galvanized steel bolt, nut and washers6 PCs







17 Cable Lug 16 mm One hole, tinned copper, purity 99% cable lug for 16 mm wire, withgalvanized steel bolt, nut and washers

46 PCs

LIST OF EARTHING MATERIAL


102000ELMTO901B

Documents

Transcript of 102000ELMTO901B