CHAMPION forage harvesterwith row-independent harvesting head

success through continuity success through continuity

100 years100 years

A specially designed jointallows the Champion C 1200to be swivelled into therequired working position.

Centrally adjustable flywheelwith 12 specially profiledblades, for good chop quality,integral blade sharpeningdevice.

Belt-driven blade rotor, intakerotor and pre-compressionroller ensures optimalharvesting.

The cracker grating for optimalkernel processing can easilybe exchanged for the smoothplate.

Hydraulically rotated ejectionchute (140°), double ejectionflap with 12 V servomotor,manually folded. Mechanicallyfolding with gas-filled struts(special equipment).

CHAMPION C 1200 precision forage harvester attachment - row-independent -

Front-mounted Side-mounted Rear-mounted

success through continuity success through continuity

100 years100 years

The intake drums with theiraggressive teeth ensure theloss-free intake of the cropeven under extreme operatingconditions.

Champion C 2200, reversingtransmission for rear linkageand front mounting, for 2flywheel wheel speeds(860/1160 min-1) for use withgrass and maize.

Low-maintenance, chainlessdrives on C2200/3000 chop-ping unit. Forward, reverse andneutral are electrically selectedfrom the driver's cab.

Cutting length adjustment (12lengths) by combination of 4-speed transmission andnumber of knives.

Special wear-resistant coatingfor chopping blades andcounter blade.

CHAMPION C 2200 precision forage harvester - row-independent -

Front-mounted Rear-mounted With pick up 2 m

success through continuity success through continuity

100 years100 years

CHAMPION C 3000 universal precision forage harvester - row-independent

Rear-mounted With pick up 2 m With pick up 3 m

C 3000Uni Cracker

Metal detector (optionalequipment) Magnetic foreignobjects in the crop aredetected, immediately trippinga safety catch before they aredrawn into the chopper.

Cutting length adjustment (12lengths) by 4-speed transmis-sion, electrical control consolefor operation from driver's cab.

Stepless hydraulic chute rotation300° with electrically operateddouble flap and 12 V servomotor,spring assisted manual folding.Optional equipment hydraulicdouble flap, hydraulically heightadjustable with access panel, 30cm higher than standard.

• Wedge-shaped, interlocking cracker rollers• Crushing all maize kernels• Increased throughput and area covered in a day• Optimal utilisation of crop’s nutritional value• Can be retrofitted

NEW

success through continuity success through continuity

100 years100 years

Champion headers with rotary sawblades.

The rotating gathering drums feedthe crop lengthways into thechopper.

Row independent harvesting ofmaize & other types of crops.

Wide range of applications: Maize,sorghum, sunflowers, whole cropsilage, oilseed rape, hemp,pampas-grass, etc.

The Champion C 2200/3000 canbe used with a 2.00 m wide grasspick-up.

High-speed flywheel for the bestchop quality and best feed quality.

success through continuity success through continuity

100 years100 years

Standard equipment

• Attachment

• Drive

• Mowing System

• Choppin device

• Intake

• Ejection chute

• Operation

• Cutting lengths

Technical data

Length m:Width m:Height of working position m:Height of transport position m:Working width m:Power requirement kW:Weight kg:PTO speed rpm:Row interval

• Optional equipment

Forage harvester C 1200

FRONT REAR and SIDE ATTACHMENTTractor three-point hydraulics Cat. II

1000 rpm PTO shaft with friction andoverrun clutch; FRONT or REAR version.Incorporating a swivelling frame and drivesystem via powerband and twin shaft 90’gearbox.

High-speed saw blade cutting across thefull width 1.25m with replaceablesegments.

Centrally adjustable flywheel (1180 rpm)with 12 tungsten carbide-coated bladesspecially serrated for Kernel crushing.Reversible shear bar with hardenededges. Built-in knife sharpening device,replaceable chopper housing lining.Kernel cracking grating.

Twin intake rollers with aggressive teeth,one sprung pre-compression roller andone smooth roller for optimumcompression at the shear bar. Intake andpre-compression rollers aredriven by oil-bath transmission.Overload protection

Folding and hydraulically rotating ejectionchute (140°), adjustable ejection doubleflap (electrically operated).

Electrically operated ejection double flapand hydraulically operated ejection chute.

Number of blades and changing V-beltpulley.

BladesV-belt pulley Ø 12 6 4180 mm 5 10 20210 mm 7,5 15 30

Tractor connections required:1 double-acting control valve required ontractor.

Forage harvesterwith header

2,801,763,95

1,2550

11001000

Row-independent

Support wheel left and right, height-adjustable crop lifter, rigid crop lifters,mechanically driven crop divider, 2nd.ejection extension, folding turret withdamping.

Forage harvester C 2200

Rear or front 3 point linkage with reversingtransmission for two speeds, in maize1150 rpm and grass 850 rpm, mechanicalside shift, left and right.

1000 rpm PTO shaft with overrun clutch.

2 high-speed saw blades cutting acrossthe full width of 2.28m with replaceablesegments.

Centrally adjustable flywheel with 12tungsten carbide-coated blades,reversible shear bar with hardened edges,integral knifes sharpening device,replaceable chopper housing lining chuteliner. Cracker grating for kernel-crushingand smooth plate.

The 2 intake and 2 pre-compressionrollers are driven by jointed shafts withsafety clutch and oil-immersedtransmission, 4-speed transmission for 4intake speeds, electrically operatedforward/neutral/reverse with automaticde-clutching.

Ejection chute rotation via hydraulicengine and bevel gear system, foldingejection chute spring-mounted and withtransport detent, double ejection flapelectrically operated.

Electrically operated gear box and doubleejection flap, hydraulically controlledejection chute and hydraulic header lift.

Adjustable via 4—speed transmission andnumber of cutting blades.

Gear: 1. 2. 3. 4.12 blade mm: 4,3 5,4 6,5 11

6 blade mm: 8,6 10,8 13,0 224 blade mm: 12,9 16,2 19,5 33

Tractor connections required:1 double-acting and 1 single acting controlvalve.

Forage harvesterwith header impl. with pick–up

2,55 2,152,35 2,404,20 4,203,70 3,702,28 2,0080 50

2050 15001000 1000

Row-independent harvesting head,pick–up,serrated knives, hydraulic sideshift, support wheels, metal detector,height-adjustable crop lifters, rigid croplifters, remote control for front attachment.

Forage harvester C 3000

Rear 3 point linkage attachment withheight-adjustable support wheels.

1000 rpm PTO shaft with overrun clutch.

2 high-speed saw blades cutting acrossthe full width of 3.00m with replaceblesegments.

Centrally adjustable flywheelwith 12tungsten carbide-coated blades,reversible shear bar with hardened edges,integral knife sharpening device,replaceable chopper housing lining andchute liner, cracker grating for kernelcrushing and smooth plate.

The 2 intake and 2 pre-compressionrollers are driven by jointed shafts withsafety clutch and oil-immersedtransmission, 4-speed transmission for 4intake speeds, electrically operatedforward/neutral/reverse with automaticde-clutching.

Hydraulically rotating ejection chute.Manual spring assisted folding withtransport position, double ejection flapelectrically operated.

Electrically operated gear box and doubleejection flap, hydraulically controlledejectin chute and hydraulic header lift.

Adjustable via 4-speed transmission andnumber of blades.

Gear: 1. 2. 3. 4.12 blade mm: 4,3 5,4 6,5 116 blade mm: 8,6 10,8 13,0 224 blade mm: 12,9 16,2 19,5 33

Tractor connections required:1 double-acting control valve.

Forage harvesterwith header impl. pick-up 2 m pick-up 3 m

2,80 2,15 2,353,00 2,60 3,004,20 4,20 4,203,70 3,70 3,703,00 2,00 2,57100 70 1002350 1700 21501000 1000 1000

Row-independent harvesting head, pickup,serrated knives, heavy duty PTO shaft,metal detector, height-adjustable croplifters, rigid crop lifters, UniCracker,central lubricating system, whole cropdivider.

success through continuity success through continuity

100 years100 years

Maschinenfabrik KEMPER GmbH & Co.KGFounded 1908, in Stadtlohn, Westfalen, Germany,development, manufacture and sale of agriculturalmachinery, on a site covering 100000 m2, 220 employees. Modern systems and productionplants, serving today's farmers and professionalusers.

The KEMPER range of products• row-independent harvesting implements

with working widths up to 7.5 metres.• Grass pick up• row-independent tractor mounted

forage harvesters• “CornStar“ corn header with rotation intake• Support wheel

Genuine Kemper Service PartsGenuine service parts ensure the perfect operationof your Kemper harvesting implement.

Illus

trat

ions

and

sp

ecifi

catio

ns a

re n

ot b

ind

ing.

The company

Maschinenfabrik KEMPER GmbH & Co.KG · P.O. Box 1352 · D-48694 Stadtlohn, GermanyTelephone +49 (0)2563/88-0 · Fax + 49 (0)2563/8844 and 8898 · E-mail info@kemper-stadtlohn.de · Internet www.kemper-stadtlohn.de

A KEMPER . . . in any case!A KEMPER . . . in any case!