STM型 STMX/L/H/R

EE Model - Electronic Torque Wrench

Electronic Torque Wrench STM型 STMX/L/H/REE Model - Electronic

EEM/EEM_SC/EEMH/EEMR

≥±2%Error%

Coefficient/Random>2%<2%

Battery-LevelUnit

● Press any key to wake up.● End user can set torque value easily.● +/-2% Accuracy from 20% to 100% Max.Torque.● Backlight makes it easy to operate in dark conditions, can be turned ON or OFF.● Automatically shuts off after 2 minutes of nonuse.

● All popular torque Units can be selected by user: N.m, Lb.in, Lb.ft.● When applied torque is near target torque, yellow LED lights up. At the targettorque the red LED lights up and the buzzer sounds.● Various kinds of heads designed for different applications:

- EEM / EEM_SC model: Fine-tooth ratchets suitable for operation in confinedspaces requiring only 8 degrees swing.

- EEMH model: Head holder model for standard 9x12mm, 14x18mm rectangularshank heads.

- EEMR model: Round head holders for Ф16mm heads.● EEM / EEMH / EEMR model: Keep the highest value and random mode.● EEM_SC model: Random mode, set relative factor while fitting with non-standardheads. Please see formula on next page.

● Battery capacity indicator.● Use 4 standard AA batteries.

PT223983

1

100% CalibratedUnique serial number for each torque wrench,corresponding to the certificate of calibration

Shockproof packagingSpecially designed for all series of“NovaTork” torque products

NovaTork Europe - Fambra AB - moment@fambra.se +46-32 61 14 66

Increment Length Width WeightN.m Lb.ft N.m mm mm kg

EEM120 1/4" 2.0-20 17.7-177* 0.01 427 46 0.75EEM220 3/8" 2.0-20 17.7-177* 0.01 427 46 0.75EEM230 3/8" 3.0-30 26.5-265* 0.01 427 46 0.75EEM250 3/8" 5.0-50 44.2-442* 0.01 452 46 0.83EEM2100 3/8" 10-100 7.4-74 0.1 482 46 0.88EEM3100 1/2" 10-100 7.4-74 0.1 482 46 0.88EEM3200 1/2" 20-200 14.7-147 0.1 522 46 1EEM3250 1/2" 25-250 18.4-184 0.1 590 46 1.36EEM3300 1/2" 30-300 22.1-221 0.1 590 46 1.36EEM4300 3/4" 30-300 22.1-221 0.1 590 46 1.4

SquareDrive

Torque Range

*Unit is Lb.in

Item No.Shank Size Increment Length Width Weight

mm N.m Lb.ft N.m mm mm kgEEMH920 9x12 2.0-20 17.7-177* 0.01 430 46 0.65EEMH930 9x12 3.0-30 26.5-265* 0.01 430 46 0.65EEMH950 9x12 5.0-50 44.2-442* 0.01 455 46 0.73EEMH9100 9x12 10-100 7.4-74 0.1 485 46 0.78EEMH14200 14x18 20-200 14.7-147 0.1 529 46 0.9EEMH14250 14x18 25-250 18.4-184 0.1 597 46 1.26EEMH14300 14x18 30-300 22.1-221 0.1 597 46 1.26

Torque Range

*Unit is Lb.in

Item No.

Increment Length Width WeightN.m Lb.ft N.m mm mm kg

EEM120SC 1/4" 2.0-20 17.7-177* 0.01 427 46 0.75EEM220SC 3/8" 2.0-20 17.7-177* 0.01 427 46 0.75EEM230SC 3/8" 3.0-30 26.5-265* 0.01 427 46 0.75EEM250SC 3/8" 5.0-50 44.2-442* 0.01 452 46 0.83EEM2100SC 3/8" 10-100 7.4-74 0.1 482 46 0.88EEM3100SC 1/2" 10-100 7.4-74 0.1 482 46 0.88EEM3200SC 1/2" 20-200 14.7-147 0.1 522 46 1EEM3250SC 1/2" 25-250 18.4-184 0.1 590 46 1.36EEM3300SC 1/2" 30-300 22.1-221 0.1 590 46 1.36EEM4300SC 3/4" 30-300 22.1-221 0.1 590 46 1.4

SquareDrive

Torque Range

*Unit is Lb.in

Item No.

E L

Press M (Menu) button until it appears icon(Coefficient K), the default of K is 1, the regular Interchangeable Heads can be used.

Indicator lightCoefficient (K) Coefficient (K)

Indicator light offTorque value

Turn on K setting mode

Calculation:

When it appears icon(Coeffi-cient K), press to set the value of K.

Press M again to confirm, then press back off, now the screen willl display setting value and icon(Coefficient K) stays on the screen, which means the function is open.

Digital Torque wrenches design for Non-Standard Inserts

Matchingsockets

Optional fittings:

【For English unit, please contact the manufacturer】

2

Electronic Torque Wrench STM型 STMX/L/H/REE Model - Electronic

EEM/EEM_SC/EEMH/EEMR

Rectangular Shank Head Holder EE Torque Wrenchfor 9x12, 14x18mm rectangular shank head insertsEEMH Reversible Ratchet Head EE Torque Wrench

Bi-direction operation, 8 degrees swing, suitable for confined spaceEEM

(Metric) (Metric)

Round Hole Increment Length Width Weightmm N.m Lb.ft N.m mm mm kg

EEMR1620 φ16 2.0-20 17.7-177* 0.01 431 46 0.65EEMR1630 φ16 3.0-30 26.5-265* 0.01 431 46 0.65EEMR1650 φ16 5.0-50 44.2-442* 0.01 456 46 0.73EEMR16100 φ16 10-100 7.4-74 0.1 486 46 0.78EEMR16200 φ16 20-200 14.7-147 0.1 517 46 0.9EEMR16250 φ16 25-250 18.4-184 0.1 585 46 1.26EEMR16300 φ16 30-300 22.1-221 0.1 585 46 1.26

Torque Range

*Unit is Lb.in

Item No.

Optional fittings:

EEMR Round Head Holder EE Torque Wrenchfor Ф16mm round hole inserts

(Metric)

EEM_SC model (Random mode) (Metric)

Note: Due to the product improvement, the technical parameters are subject to variation, please refer to the actual production from the factory.

NovaTork Europe - Fambra AB - moment@fambra.se +46-32 61 14 66