10 RULES TO USE JIG SAWS LONGER AND CHEAPER
12
10 RULES… 10 RULES TO USE JIG SAWS LONGER AND CHEAPER
-
Upload
georgi-doychev -
Category
Devices & Hardware
-
view
7 -
download
1
Transcript of 10 RULES TO USE JIG SAWS LONGER AND CHEAPER
10 RULES TO USE JIG SAWS LONGER AND CHEAPER
10 RULES…
Rule #1
Regularly lubricate the roller guide with a drop of oil. In this manner, the roller extends its lifespan while cutting is performed trouble free.
10 RULES…
Rule #2
In continuous use, leave the jig saw from time to time running at max speed without load. In this way, the motor cools off better thus lasts longer.
10 RULES…
Rule #3
Hold the jigsaw in a way your hand and saw blade lying in one line (as much as possible). In such a fashion, better control and more accurate cuts are achieved.
10 RULES…
Rule #4
While cutting, guide the jigsaw slowly, with moderate pressure. This ensures precise straight cuts, while protecting the base plate and saw blade from bending and breaking respectively.
10 RULES…
Rule #5
Keep the base plate flat against the work piece while cutting. In this way, more precise cuts are achieved.
10 RULES…
Rule #6
Regularly test the sharpness of the saw blade by running your finger along the cutting edge. If you feel scratches during that action, the blade still performs well.
10 RULES…
Rule #7
Inner circles or like (for kitchen countertops, decorations, etc) can be cut more easy if you drill in advance a hole (larger than the saw blade width) on the piece you will cut out. Start cutting out from the drilled spot.
10 RULES…
Rule #8
Cracking of wood when cutting across the grain can be avoided if you mark the cutting line (with a pocket knife or so) in advance.
10 RULES…
Rule #9
Precise cuts in metal are achieved at low speed without pendulum action.
10 RULES…
Rule #10
When cutting metal, squirt regularly cooling oil onto the saw blade or work piece. In this way, the wear on the blade is reduced.
10 RULES…
GOOD LUCK IN YOUR PROJECTS !
summarized by Georgi Doychev
