1.0 NON-MnDOT PRICE SCHEDULE DUMP BOXmndot.org/maintenance/equipment/contracts/S-863(5) Snow plow...
29
Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Item # Information Requested Answer 1.0 Box Make and Model Crysteel HD Select for Roller Combo or Front Mount Telescopic Hoists 2.0 List Truck Type Box Fits 84" CA single axle chassis to 138" CT tamdem Axle Chassis 3.0 Box Style Crysteel HD Select 4.0 Width & Length of Box 96" wide x 10' to 16' 5.0 Side Panel Description 3/4 double panel walls, 10 ga. A1011 X10 inner panel and 12ga A1011 X10 outer panel with Board Pockets 26" sides on 10' Model, 34" sides on 13 to 15' Models (see options for "struck or taller sides) 6.0 Front Panel Description 40" to 60" 10 ga. A1011 X10 front panel 7.0 Floor Description 7 ga. A1011 X 10, 3 pc, with 6" floor to side radius (see options for AR400 Floor ILO 7ga. X10) 8.0 Corner Post Description Stainless Steel Rear corner posts with oval S/T/T lights cutouts 9.0 Under Structure Description Western Tubular Understructure 10.0 Tailgate Description 10' Body = 32" 3 horizontal Doubled Wall panels, 10 ga. A1011 ,13 to 15 Bodies = 42" 3 horizontal Double walled panels 10 ga A1011 11.0 Hinge Description N/A (part of Hoist) 12.0 Description of Peripheral Items (Lights, Access Steps, etc.) Oval S/T/T Lights in Rear Post, standard DOT Lighting 13.0 Is Installation included in price? Yes____ or No__X __ 1.0 NON-MnDOT PRICE SCHEDULE DUMP BOX Bert's Truck Equipment of Moorhead, Inc Jim McLaughlin 3804 Hwy 75 North PO Box 336 Moorhead, MN 56560 218-233-8681 800-232-3787 218-233-9548 [email protected]
Transcript of 1.0 NON-MnDOT PRICE SCHEDULE DUMP BOXmndot.org/maintenance/equipment/contracts/S-863(5) Snow plow...
Price quote for:
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip:
Phone #:
Toll Free #:
Fax #:
Email Address:
Item # Information Requested Answer
1.0 Box Make and ModelCrysteel HD Select for Roller Combo or Front Mount Telescopic Hoists
2.0 List Truck Type Box Fits84" CA single axle chassis to 138" CT tamdem Axle Chassis
3.0 Box Style Crysteel HD Select
4.0 Width & Length of Box 96" wide x 10' to 16'
5.0
Side Panel Description
3/4 double panel walls, 10 ga. A1011 X10 inner panel and 12ga A1011 X10 outer panel with Board Pockets 26" sides on 10' Model, 34" sides on 13 to 15' Models (see options for "struck or taller sides)
6.0Front Panel Description
40" to 60" 10 ga. A1011 X10 front panel
7.0Floor Description
7 ga. A1011 X 10, 3 pc, with 6" floor to side radius (see options for AR400 Floor ILO 7ga. X10)
8.0 Corner Post DescriptionStainless Steel Rear corner posts with oval S/T/T lights cutouts
9.0 Under Structure Description Western Tubular Understructure
10.0Tailgate Description
10' Body = 32" 3 horizontal Doubled Wall panels, 10 ga. A1011 ,13 to 15 Bodies = 42" 3 horizontal Double walled panels 10 ga A1011
11.0 Hinge Description N/A (part of Hoist)
12.0 Description of Peripheral Items (Lights, Access Steps, etc.) Oval S/T/T Lights in Rear Post, standard DOT Lighting
13.0 Is Installation included in price? Yes____ or No__X__
1.0 NON-MnDOT PRICE SCHEDULE DUMP BOX
Bert's Truck Equipment of Moorhead, IncJim McLaughlin3804 Hwy 75 NorthPO Box 336Moorhead, MN [email protected]
14.0 Is Box Painted? Yes____ or No_X_ (facory prime only)
15.0 Warranty Information 5 Year Limited Warranty
TOTAL PRICE: See Attached Price Schedule 1.0-1
Description Answer
Air Operated Tailgate Latch Included
Box Vibrator - Make & Model
PRICE See Options
List options for box, such as cab shield lights, prewet tanks,tarp covers, etc. Number items below starting with 1.3 and use as many as needed.
PRICE See Attached Price Schedule 1.0-1
Cost per loaded mile for pickup and or delivery of vehicle (if applicab $ 2.00 Delivery Starting Point City, State, & Zip:
Bert's Truck Equipment of Moorhead, Inc1.0-1 Price Schedule for Cysteel Select Standard Dump
Bodies for Roller Combo or front Mount Telescopic Hoists11-Jun-18
Bodies for use with Roller Combo Hoists Price1.0 Box (1) 10' Crysteel Select HD , 26/32/40, for Roller Combo RC750 Hoi 5,187.00$ 1.0 Box (2) 11' Crysteel Select HD , 26/32/40, for Roller Combo RC750 Hoi 5,366.00$ 1.0 Box (3) 13' Crysteel Select HD , 34/42/40, for RC690 Hoist 6,546.00$ 1.0 Box (4) 13' 6" Crysteel Select HD , 34/42/40, for RC690 Hoist 6,641.00$ 1.0 Box (5) 14' Crysteel Select HD , 34/42/40, for RC690 Hoist 6,799.00$ 1.0 Box (6) 14' 6" Crysteel Select HD , 34/42/40, for RC690 Hoist 6,894.00$ 1.0 Box (7) 15' Crysteel Select HD , 34/42/40, for RC690 Hoist 6,989.00$ 1.0 Box (8) 15' 6"Crysteel Select HD , 34/42/40, for RC690 Hoist 7,084.00$ 1.0 Box (9) 16' Crysteel Select HD , 34/42/40, for RC690 Hoist 7,180.00$
Bodies for use with Marathon or Mailhot front mount telescopic Hoists1.0 Box (10 10' Crysteel Select HD , 26/32/50, for Headlift Hoist 5,602.00$ 1.0 Box (11 11' Crysteel Select HD , 26/32/50, for Headlift Hoist 5,781.00$ 1.0 Box (12 13' Crysteel Select HD , 34/42/50, for Headlift Hoist 6,961.00$ 1.0 Box (13 13' 6" Crysteel Select HD , 34/42/50, for Headlift Hoist 7,057.00$ 1.0 Box (14 14' Crysteel Select HD , 34/42/50, for Headlift Hoist 7,215.00$ 1.0 Box (15 14' 6" Crysteel Select HD , 34/42/50, for Headlift Hoist 7,309.00$ 1.0 Box (16 15' Crysteel Select HD , 34/42/50, for Headlift Hoist 7,404.00$ 1.0 Box (17 15' 6"Crysteel Select HD , 34/42/40, for Headlift Hoist 7,500.00$ 1.0 Box (18 16' Crysteel Select HD , 34/42/40, for for Headlift Hoist 7,595.00$
Dump Body Options For Crysteel Select Single and tandem axle bodies
Installation, Box Vibrator & Painting Options Price1.10 Installation of Dump Body 915.00$
1.20Vibco DC 3500 ,Phillips Vibre V-3000, or Couger 3200 installed 995.00$
1.30 Paint 10' Body One Standard Color 1,575.00$ 1.31 Paint 13 to 16' Body One Standard Color 1,675.00$ 1.32 Crysteel Z-Coat one standard Color 3,595.00$ 1.33 Petroleum based undercoating 660.00$
1.34Prep body and Line-X Spray on lining on exterior front corners, sides and tailgate 3,395.00$ Standard Options
1.35 24” 10 Ga. X10 bolt/weld on cab shield, installed and painted 680.00$ 1.36 24” 10 Ga. X10 Stationary cab shield, installed and painted 1,464.00$ 1.37 Adder for 7 ga. Cabshield 70.00$ 1.37A Adder for REPTO Pump Mount on Cab shield 300.00$ 1.38 Side mounted box ladder, installed 150.00$ 1.39 Fold down ladder, installed 240.00$ 1.40 Stow away ladder, installed 375.00$ 1.41 Bert’s HD Mud Flaps, pair, installed on rear of chassis 80.00$ 1.42 Bert’s HD Mud Flaps, pair, installed in front of rear wheels 80.00$ 1.43 10” oak side boards 260.00$ 1.44 ¼” A1011 X10 floor ILO 7 ga X10 44.00$ ft1.45 3/16 “ AR 400 floor ILO 7 Ga. A1011 X10 for all bodies add 797.00$ 1.46 1/4 “ AR 400 floor ILO 7 Ga. A1011 X10 for all bodies add 1,017.00$ 1.47 Grip Strut walk way, Installed, 284.00$ 1.48 Flat bar walk way, installed 220.00$
1.49M150 or M2260 Eyebrow fenders, with Poly bolt on brackets, single axle chassis, installed 975.00$
1.50M150 OR M2260 Eyebrow fenders, with Stainless steel bolt on brackets, single axle chassis, Installed 1,110.00$
1.51M4000 SCS poly fenders for tandem axle chassis, Poly bolt on brackets installed 1,435.00$
1.52M4000 SCS poly fenders for tandem axle chassis, S/S bolt on brackets installed 1,565.00$
1.53 Adder for Doghouse for Crysteel Turbo Hoists 300.00$ 1.54 LED Lights ILO Standard add 120.00$ 1.55 Extra Light Cut outs 85.00$ set1.56 7ga A1011 X10 Gate ILO 10ga 40.00$ 1.57 Crysteel Body Stabilizer for head lift hoist applications, installed 1,093.00$ 1.58 32" Struck sides and Ends on 10' Body 75.00$ 1.59 42" to 50" Struck Sides and Ends on 13 to 15' Bodies 256.00$ 1.60 3/16" AR400 Sides & Ends ILO standard 1,329.00$ 1.61 1/4" AR400 sides and ends ILO Standard 1,655.00$ 1.62 3/16" AR400 tailgate ILO Standard 175.00$ 1.63 7 ga A1011 Grade 50 sides & Ends ILO 10 ga Grade 50 215.00$ 1.64 SS Rear Apron 295.00$ 1.65 I-beam Long sills ILO of Formed Long Beams 1,372.00$ 1.66 Shur-Lok Side to side HD Roll Tarp, installed 1,975.00$ 1.67 Aero electric tarp, Installed 2,595.00$ 1.68 Aero Tensioner 595.00$ 1.69 Flat Labor rate to accomidate Options or Accessories 110.00$ hr
VENDOR Bert's Truck Equipment Inc.CONTACT PERSON Jim McLaughlinADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56560PHONE NO. 218-233-8681 TOLL FREE 800-232-3787FAX NO. 218-233-9548 E-MAIL ADDRESS : [email protected]
Price quote for:
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip:
Phone #:
Toll Free #:
Fax #:
Email Address:
Item # Information Requested Answer
1.0 Box Make and ModelCrysteel Elliptcal HD Select for Roller Combo or Front Mount Telescopic Hoists
2.0 List Truck Type Box Fits84" CA single axle chassis to 138" CT tamdem Axle Chassis
3.0 Box Style Crysteel HD Select Elliptical
4.0 Width & Length of Box 96" wide x 10' to 16'
5.0Side Panel Description
10' bodies,26” 10ga. A1011 Steel with Board Pockets,13 to 15' bodies,34” 10ga. A1011 Steel with Board Pockets (see option for Struck Sides)
6.0Front Panel Description
40" to 60" 10 ga. A1011 X10 front panel
7.0Floor Description
7 ga. A1011 X 10, 3 pc, with 18" floor to side radius (see options for AR400 Floor ILO 7ga. X10)
8.0 Corner Post DescriptionStainless Steel Rear corner posts with oval S/T/T lights cutouts
9.0 Under Structure Description Western Tubular Understructure
10.0Tailgate Description
10' Body = 32" 3 horizontal Doubled Wall panels, 10 ga. A1011 ,13 to 15 Bodies = 42" 3 horizontal Double walled panels 10 ga A1011
11.0 Hinge Description N/A (part of Hoist)
12.0 Description of Peripheral Items (Lights, Access Steps, etc.) Oval S/T/T Lights in Rear Post, standard DOT Lighting
13.0 Is Installation included in price? Yes____ or No__X__
1.0 NON-MnDOT PRICE SCHEDULE DUMP BOX
Bert's Truck Equipment of Moorhead, IncJim McLaughlin3804 Hwy 75 NorthPO Box 336Moorhead, MN [email protected]
14.0Is Box Painted?
Yes____ or No_X_ (facory prime only)
15.0 Warranty Information 5 Year Limited Warranty
TOTAL PRICE: See Attached Price Schedule 1.0-2
Description Answer
Air Operated Tailgate Latch Included
Box Vibrator - Make & Model
PRICE See Options
List options for box, such as cab shield lights, prewet tanks,tarp covers, etc. Number items below starting with 1.3 and use as many as needed.
PRICE See Attached Price Schedule 1.0-2
Cost per loaded mile for pickup and or delivery of vehicle (if applicab $ 2.00 Delivery Starting Point City, State, & Zip:
Bert's Truck Equipment of Moorhead, Inc1.0-2 Price Schedule for Cysteeel Select Elliptical Dump
Bodies for Roller Combo or front Mount Telescopic Hoists11-Jun-18
Elliptical Bodies for use with Roller Combo Hoists1.0 Box (1) 10' Crysteel Select HD Elliptical Body, 26/32/XX 4,988.00$ 1.0 Box (2) 11' Crysteel Select HD Elliptical Body, 26/32/XX 5,135.00$ 1.0 Box (3) 13' Crysteel Select HD Elliptical Body, 34/42/XX 6,221.00$ 1.0 Box (4) 13' 6" Crysteel Select HD , Elliptical Body, 34/42/XX 6,299.00$ 1.0 Box (5) 14' Crysteel Select HD , Elliptical Body, 34/42/XX 6,439.00$ 1.0 Box (6) 14' 6" Crysteel Select HD Elliptical Body, 34/42/XX 6,517.00$ 1.0 Box (7) 15' Crysteel Select HD Elliptical Body, 34/42/XX 6,595.00$ 1.0 Box (8) 15' 6" Crysteel Select HD Elliptical Body, 34/42/XX 6,673.00$ 1.0 Box (9) 16' Crysteel Select HD Elliptical Body, 34/42/XX 6,750.00$
Elliptical Bodies for use with Marathon or Mailhot Hoists1.0 Box (10 10' Crysteel Select HD Elliptical Body, 26/32/XX 5,403.00$ 1.0 Box (11 11' Crysteel Select HD Elliptical Body, 26/32/XX 5,551.00$ 1.0 Box (12 13' Crysteel Select HD Elliptical Body, 34/42/XX 6,637.00$ 1.0 Box (13 13' 6" Crysteel Select HD , Elliptical Body, 34/42/XX 6,715.00$ 1.0 Box (14 14' Crysteel Select HD , Elliptical Body, 34/42/XX 6,854.00$ 1.0 Box (15 14' 6" Crysteel Select HD Elliptical Body, 34/42/XX 6,932.00$ 1.0 Box (16 15' Crysteel Select HD Elliptical Body, 34/42/XX 7,010.00$ 1.0 Box (17 15' 6" Crysteel Select HD Elliptical Body, 34/42/XX 7,088.00$ 1.0 Box (18 16' Crysteel Select HD Elliptical Body, 34/42/XX 7,166.00$
Installation, Box Vibrator & Painting Options Price1.10 Installation of Dump Body 915.00$
1.20Vibco DC 3500 ,Phillips Vibre V-3000, or Couger 3200 installed 995.00$
1.30 Paint 10' Body One Standard Color 1,575.00$ 1.31 Paint 13 to 16' Body One Standard Color 1,675.00$ 1.32 Crysteel Z-Coat one standard Color 3,595.00$ 1.33 Petroleum based undercoating 660.00$
1.34Prep body and Line-X Spray on lining on exterior front corners, sides and tailgate 3,395.00$ Standard Options
1.35 24” 10 Ga. X10 bolt/weld on cab shield, installed and painted 680.00$ 1.36 24” 10 Ga. X10 Stationary cab shield, installed and painted 1,539.00$ 1.37 Adder for 7 ga. Cabshield 70.00$ 1.37A Adder for REPTO Pump Mount on Cab shield 300.00$ 1.38 Side mounted box ladder, installed 150.00$ 1.39 Fold down ladder, installed 240.00$ 1.40 Stow away ladder, installed 375.00$ 1.41 Bert’s HD Mud Flaps, pair, installed on rear of chassis 80.00$ 1.42 Bert’s HD Mud Flaps, pair, installed in front of rear wheels 80.00$ 1.43 10” oak side boards 260.00$ 1.44 ¼” A1011 X10 floor ILO 7 ga X10 44.00$ ft1.45 3/16 “ AR 400 floor ILO 7 Ga. A1011 X10 for all bodies add 797.00$ 1.46 1/4 “ AR 400 floor ILO 7 Ga. A1011 X10 for all bodies add 1,017.00$ 1.47 Grip Strut walk way, Installed, 284.00$ 1.48 Flat bar walk way, installed 220.00$
Dump Body Options For Crysteel Select Elliptical Single and tandem axle bodies
1.49M150 or M2260 Eyebrow fenders, with Poly bolt on brackets, single axle chassis, installed 975.00$
1.50M150 OR M2260 Eyebrow fenders, with Stainless steel bolt on brackets, single axle chassis, Installed 1,110.00$
1.51M4000 SCS poly fenders for tandem axle chassis, Poly bolt on brackets installed 1,435.00$
1.52M4000 SCS poly fenders for tandem axle chassis, S/S bolt on brackets installed 1,565.00$
1.53 Adder for Doghouse for Crysteel Turbo Hoists 300.00$ 1.54 LED Lights ILO Standard add 120.00$ 1.55 Extra Light Cut outs 85.00$ set1.56 7ga A1011 X10 Gate ILO 10ga 40.00$ 1.57 Crysteel Body Stabilizer for head lift hoist applications, installed 1,093.00$ 1.58 32" Struck sides and Ends on 10' Body 75.00$ 1.59 42" to 50" Struck Sides and Ends on 13 to 15' Bodies 256.00$ 1.60 3/16" AR400 Sides & Ends ILO standard 1,329.00$ 1.61 1/4" AR400 sides and ends ILO Standard 1,655.00$ 1.62 3/16" AR400 tailgate ILO Standard 175.00$ 1.63 7 ga A1011 Grade 50 sides & Ends ILO 10 ga Grade 50 175.00$ 1.64 SS Rear Apron 295.00$ 1.65 I-beam Long sills ILO of Formed Long Beams 1,372.00$ 1.66 Shur-Lok Side to side HD Roll Tarp, installed 1,975.00$ 1.67 Aero electric tarp, Installed 2,595.00$ 1.68 Aero Tensioner 595.00$ 1.69 Flat Labor rate to accomidate Options or Accessories 110.00$ hr1.70 Shur-Lok Side to side HD Roll Tarp, installed 1,950.00$ 1.71 Aero electric tarp, Installed 2,595.00$ 1.72 Aero Tensioner 595.00$ 1.74 Flat Labor rate to accomidate Options or Accessories 110.00$ hr
VENDOR Bert's Truck Equipment Inc.CONTACT PERSON Jim McLaughlinADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56560PHONE NO. 218-233-8681 TOLL FREE 800-232-3787FAX NO. 218-233-9548 E-MAIL ADDRESS : [email protected]
Price quote for:
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip:
Phone #:
Toll Free #:
Fax #:
Email Address:
Item # Information Requested Answer
1.0Box Make and Model
Crysteel HD Select STAINLESS STEEL Standard or Eliiptical Bodies set up RC Series Hoists and Marathon or Mailhot Headlift Hoist
2.0 List Truck Type Box Fits84" CA single axle chassis to 138" CT tamdem Axle Chassis
3.0 Box Style Crysteel HD Select Stainless Steel
4.0 Width & Length of Box 96" wide x 10' to 16'
5.0
Side Panel Description
10' bodies,26” 10ga. 201 Stainless Steel with Board Pockets,13 to 16' bodies,34” 10ga. 201 Stanless Steel with Board Pockets (see option for Struck Sides)
6.0 Front Panel Description40” to 50"10ga. 201 Stainless Steel
7.0 Floor Description7 ga A1011 Mild Steel (see options for all 201 SS or 3/16 AR400) 1pc
8.0 Corner Post Description201 Stainless Steel Rear corner posts with oval S/T/T lights cutouts
9.0 Under Structure Description Western Tubular Understructure
10.0Tailgate Description
10' Body = 32" 3 horizontal Doubled Wall panels, 10 ga. A1011 ,13 to 15 Bodies = 42" 3 horizontal Double walled panels 10 ga A1011
11.0 Hinge Description N/A (part of Hoist)
12.0 Description of Peripheral Items (Lights, Access Steps, etc.) Oval S/T/T Lights in Rear Post, standard DOT Lighting
13.0 Is Installation included in price? Yes____ or No__X__
1.0 NON-MnDOT PRICE SCHEDULE DUMP BOX
Bert's Truck Equipment of Moorhead, IncJim McLaughlin3804 Hwy 75 NorthPO Box 336Moorhead, MN [email protected]
14.0 Is Box Painted? Yes____ or No_X_
15.0 Warranty Information 5 Year Limited Warranty
TOTAL PRICE: See Attached Price Schedule 1.0-3
Description Answer
Air Operated Tailgate Latch Included
Box Vibrator - Make & Model
PRICE See Options
List options for box, such as cab shield lights, prewet tanks,tarp covers, etc. Number items below starting with 1.3 and use as many as needed.
PRICE See Attached Price Schedule 1.0-3
Cost per loaded mile for pickup and or delivery of vehicle (if applicab $ 2.00 Delivery Starting Point City, State, & Zip:
Bert's Truck Equipment of Moorhead, Inc1.0-3 Price Schedule for Cysteeel Select STAINLESS STEEL Standard & EllipticalDump Bodies for Roller
Combo or front Mount Telescopic Hoists11-Jun-18
Bodies for use with Roller Combo HoistsStandard Body Elliptical Body
1.0 Box (1) 10' Crysteel Select HD Stainless Steel Body, 26/32/XX 7,955.00$ 8,303.00$ 1.0 Box (2) 11' Crysteel Select HD Stainless Steel Body, 26/32/XX 8,211.00$ 8,516.00$ 1.0 Box (3) 13' Crysteel Select HD Stainless Steel Body, 34/42/XX 10,123.00$ 10,485.00$ 1.0 Box (4) 13' 6" Crysteel Select HD , Stainless Steel Body, 34/42/XX 10,266.00$ 10,626.00$ 1.0 Box (5) 14' Crysteel Select HD , Stainless Steel Body, 34/42/XX 10,471.00$ 10,831.00$ 1.0 Box (6) 14' 6" Crysteel Select HD, Stainless Steel Body, 34/42/XX 10,613.00$ 11,019.00$ 1.0 Box (7) 15' Crysteel Select HD Stainless Steel Body, 34/42/XX 10,755.00$ 11,160.00$ 1.0 Box (8) 15' 6" Crysteel Select HD, Stainless Steel Body, 34/42/XX 10,897.00$ 11,367.00$ 1.0 Box (9) 16, Crysteel Select HD Stainless Steel Body, 34/42/XX 11,039.00$ 11,507.00$
Bodies for Marathon or Mailhot Headlift hoists1.0 Box (10 10' Crysteel Select HD Stainless Steel Body, 26/32/XX 8,918.00$ 9,266.00$ 1.0 Box (11 11' Crysteel Select HD Stainless Steel Body, 26/32/XX 9,174.00$ 9,478.00$ 1.0 Box (12 13' Crysteel Select HD Stainless Steel Body, 34/42/XX 11,085.00$ 11,448.00$ 1.0 Box (13 13' 6" Crysteel Select HD , Stainless Steel Body, 34/42/XX 11,228.00$ 11,589.00$ 1.0 Box (14 14' Crysteel Select HD , Stainless Steel Body, 34/42/XX 11,434.00$ 11,794.00$ 1.0 Box (15 14' 6" Crysteel Select HD, Stainless Steel Body, 34/42/XX 11,576.00$ 11,982.00$ 1.0 Box (16 15' Crysteel Select HD Stainless Steel Body, 34/42/XX 11,718.00$ 12,123.00$ 1.0 Box (17 15' 6" Crysteel Select HD, Stainless Steel Body, 34/42/XX 11,860.00$ 12,330.00$ 1.0 Box (18 16, Crysteel Select HD Stainless Steel Body, 34/42/XX 12,002.00$ 12,470.00$
Note: Elliptical Bodies Come Standard with Stainless Steel Full Lentgh Fenders
Dump Body Options For Crysteel Select Stainless steel Single and tandem axle bodies
Installation, Box Vibrator & Painting Options Price1.10 Installation of Dump Body 915.00$
1.20Vibco DC 35Vibco DC 3500 ,Phillips Vibre V-3000, or Couger 3200 installed 995.00$
1.30 Petroleum based undercoating 660.00$ Standard Options
1.31 24” 10 Ga. X10 mild steel Stationary cab shield, installed and 1,536.00$ 1.32 24” 10 Ga. 201 SS bolt/weld on cab shield, installed 1,226.00$ 1.33 24” 10 Ga. 201 SS Stationary cab shield, installed 1,958.00$ 1.34 Stainless Steel Adjustable strobe light brackets 395.00$ 1.35 Adder for 7 ga. 201 SS Cabshield ILO 10 ga 201 SS 325.00$
1.35A Adder for REPTO Pump Mount on Cab shield 300.00$ 1.36 Side mounted box ladder, installed 175.00$ 1.37 SS Fold down ladder, installed 445.00$ 1.38 Stow away ladder, installed 495.00$ 1.39 Bert’s HD Mud Flaps, pair, installed on rear of chassis 80.00$ 1.40 Bert’s HD Mud Flaps, pair, installed in front of rear wheels 80.00$ 1.41 10” oak side boards 260.00$ 1.42 3/16 “ AR 400 floor ILO 7 Ga. A1011 X10 for standard bodies 1,078.00$ 1.43 3/16 “ AR 400 floor ILO 7 Ga. A1011 X10 for Elliptical bodies 512.00$ 1.44 1/4 “ AR 400 floor ILO 7 Ga. A1011 X10 for Standard bodies 1,288.00$ 1.45 1/4 “ AR 400 floor ILO 7 Ga. A1011 X10 Elliptical bodies add 750.00$ 1.46 100% stainelss steel body with 7 ga 201 SS Floor Add 3,286.00$ Standard Box
1.47 100% stainelss steel body with 7 ga 201 SS Floor Add 3,286.00$ Elliptical Box1.48 Grip Strut walk way, installed 744.00$ 1.49 1/4" x 2" Flat stock walk way, installed 482.00$ 1.50 Receiver tubes installed on underside of 10-11.5' box 265.00$ 1.51 Receiver insert SS tread grip walkrails for 10-11.5' box 832.00$ 1.52 Receiver tubes installed on underside of 12-13.5' box 276.00$ 1.53 Receiver insert SS tread grip walkrails for 12-13.5' box 953.00$ 1.54 Receiver tubes installed on underside of 14-16' box 318.00$ 1.55 Receiver insert SS tread grip walkrails for 14-16' box 1,059.00$
1.56M150 OR M2260 Eyebrow fenders, with Stainless steel bolt on brackets, single axle chassis, Installed 1,060.00$
1.57M4000 SCS poly fenders for tandem axle chassis, S/S bolt on brackets installed 1,505.00$
1.58 Adder for Doghouse for Crysteel Turbo Hoists 1,015.00$ 1.59 LED Lights ILO Standard add 110.00$ 1.60 Extra Light Cut outs 85.00$ set1.61 Crysteel Body Stabilizer for head lift hoist applications, installe 1,093.00$ 1.62 Struck Sides and Ends on 10 to 16' Bodies 40.00$ 1.63 7 ga Sides & Ends ILO standard Standard Body 811.00$ 1.64 7 ga Sides & Ends ILO standard Elliptcal Body 811.00$ 1.65 7 ga Tailgate IL Standard 159.00$
1.66Fullrib Tailgate w/ 3/16 AR450 Inner Panel with 10GA 201 SS Outer Panel 30.00$
1.67 42" sides, 50 " ends, Standard Body 550.00$ 1.68 42" sides, 50 " ends, Elliptical Body 550.00$ 1.69 I-beam long sills IlO Fromed long sills, Standard Body 1,544.00$ 1.70 I-beam long sills IlO Fromed long sills, Elliptical Body 1,544.00$ 1.71 Shur-Lok Side to side HD Roll Tarp, installed 1,975.00$ 1.72 Aero electric tarp, Installed 2,595.00$ 1.73 Aero Tensioner 595.00$ 1.74 Flat Labor rate to accomidate Options or Accessories 110.00$ 1.75 Delete S/S full length fenders (500.00)$
VENDOR Bert's Truck Equipment, Inc.CONTACT PERSON Jim McLaughlinADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56561-0336PHONE NO. 218-233-8681 TOLL FREE 800-232-3787FAX NO. 218-233-9548 E-MAIL ADDRESS [email protected]
Price quote for:
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip:
Phone #:
Toll Free #:
Fax #:
Email Address:
Item # Information Requested Answer
1.0Box Make and Model
purpose dump body with double acting trunion hydraulic hoist (mild and stainless steel)
2.0 List Truck Type Box Fits84" CA single axle chassis to 138" CT tamdem Axle Chassis
3.0 Box StyleBonnell Commander MCR-series multi-purpose body
4.0 Width & Length of Box 96" wide x 10' to 16'
5.0 Side Panel Description7 gauge truncated anti-prism side, 26° conveyor load angle
6.0 Front Panel Description 7 gauge front panel
7.0 Floor DescriptionRemoveable floor, 30-1/2" wide X667 pintle-style conveyor chain (24,500 lb tensile strength)
8.0 Corner Post Description201 Stainless Steel Rear corner posts with oval S/T/T lights cutouts
9.0 Under Structure Description 1/4" Steel Formed Long sills for Telescopic Hoist
10.0 Tailgate Description 10'-16': 51.9" six panel, 7 gauge construction
11.0 Hinge Description10'-11': 1-3/4" dia pivot pins, greaseable; 12'-16'; 2" dia pivot pins, greaseable
12.0 Description of Peripheral Items (Lights, Access Steps, etc.) Oval S/T/T Lights in Rear Post, standard DOT Lighting
13.0 Is Installation included in price? Yes____ or No__X__
14.0 Is Box Painted? Yes____ or No_X_
1.0 NON-MnDOT PRICE SCHEDULE DUMP BOX
Bert's Truck Equipment of Moorhead, IncJim McLaughlin3804 Hwy 75 NorthPO Box 336Moorhead, MN [email protected]
15.0 Warranty InformationOne Year Limited Warranty, Per Bonnell Industries published warranty policy
TOTAL PRICE: See Attached Price Schedule 1.0-4
Description Answer
Air Operated Tailgate Latch Included
Box Vibrator - Make & Model
PRICE See Options
List options for box, such as cab shield lights, prewet tanks,tarp covers, etc. Number items below starting with 1.3 and use as many as needed.
PRICE See Attached Price Schedule 1.0-4
Cost per loaded mile for pickup and or delivery of vehicle (if applicab $ 2.00 Delivery Starting Point City, State, & Zip:
Bert's Truck Equipment of Moorhead, Inc1.0-4Price Schedule for Bonnell Commander Series Combination
Spreader/ Dump Bodies for front Mount Telescopic Hoists11-Jun-18
MULTI-PURPOSE DUMP BODYMid Conveyor ….. Chain-type Conveyor ….. Rear Discharge
FEATURES & BENEFITS● Body available in carbon or 201 stainless steel.● Fully welded body compliant with AWS welding standards.● Conveyor system allows body to safely remain on truck frame while unloading.● Twin pneumatic cylinders lock tailgate into position with over-center latches. ● Prism-shaped sidewalls and steep bulkhead slope for improved material unloading.● Tapered body design allows compacted and irregularly shaped materials to exit dump body without lodging.● Reinforced fabricated longsills and crossmembers for added strength.● Grease manifold system to service critical wear points.● 6-panel, double-acting tailgate.● Manually adjusted screw jack feedgate provides infinite feedgate openings.
Note, spinner not included, See spinner optionsCODE # DESCRIPTION Contract Price
BONNELL COMMANDER- MULTI PURPOSE DUMP BODY WITH 30-1/2" WIDE HEAVY DUTY 667XH PINTLE CHAIN CONVEYOR TO CONVEY TO
REAR SPINNER ASSEMBLY. 1/2X1-1/2 BAR FLIGHTS EVERY 4-1/2" CARBON STEEL BODIES COME PRIMERED ONLY. (NOTE-UNIT DOES
NOT INCLUDE HOIST, SUB-FRAME, REAR HINGE ASSEMBLY, TOP SCREENS OR SPINNER ASSEMBLY)
REAR DISCHARGEMCR-09-CS 9'-0" LONG, CARBON STEEL, 7.9 YDS STRUCK @ TAILGATE HEIGHT 18,372.00$ MCR-09-S2 9'-0" LONG, 201 STAINLESS STEEL, 7.9 YDS STRUCK @ TAILGATE HEIGH 21,965.00$ MCR-09-S3 9'-0" LONG, 304 STAINLESS STEEL, 7.9 YDS STRUCK @ TAILGATE HEIGH 24,309.00$ MCR-10-CS 10'-0" LONG, CARBON STEEL, 8.8 YDS STRUCK @ TAILGATE HEIGHT 18,901.00$ MCR-10-S2 10'-0" LONG, 201 STAINLESS STEEL, 8.8 YDS STRUCK @ TAILGATE HEIG 22,860.00$ MCR-10-S3 10'-0" LONG, 304 STAINLESS STEEL, 8.8 YDS STRUCK @ TAILGATE HEIG 25,178.00$ MCR-11-CS 11'-0" LONG, CARBON STEEL, 9.8 YDS STRUCK @ TAILGATE HEIGHT 19,430.00$ MCR-11-S2 11'-0" LONG, 201 STAINLESS STEEL, 9.8 YDS STRUCK @ TAILGATE HEIG 23,755.00$ MCR-11-S3 11'-0" LONG, 304 STAINLESS STEEL, 9.8 YDS STRUCK @ TAILGATE HEIG 26,047.00$ MCR-12-CS 12'-0" LONG, CARBON STEEL, 10.8 YDS STRUCK @ TAILGATE HEIGHT 19,959.00$ MCR-12-S2 12'-0" LONG, 201 STAINLESS STEEL, 10.8 YDS STRUCK @ TAILGATE HEIG 24,652.00$ MCR-12-S3 12'-0" LONG, 304 STAINLESS STEEL, 10.8 YDS STRUCK @ TAILGATE HEIG 26,915.00$ MCR-13-CS 13'-0" LONG, CARBON STEEL, 11.8 YDS STRUCK @ TAILGATE HEIGHT 20,487.00$ MCR-13-S2 13'-0" LONG, 201 STAINLESS STEEL, 11.8 YDS STRUCK @ TAILGATE HEIG 25,547.00$ MCR-13-S3 13'-0" LONG, 304 STAINLESS STEEL, 11.8 YDS STRUCK @ TAILGATE HEIG 27,784.00$ MCR-14-CS 14'-0" LONG, CARBON STEEL, 12.8 YDS STRUCK @ TAILGATE HEIGHT 21,217.00$ MCR-14-S2 14'-0" LONG, 201 STAINLESS STEEL, 12.8 YDS STRUCK @ TAILGATE HEIG 26,642.00$ MCR-14-S3 14'-0" LONG, 304 STAINLESS STEEL, 12.8 YDS STRUCK @ TAILGATE HEIG 28,853.00$ MCR-15-CS 15'-0" LONG, CARBON STEEL, 13.8 YDS STRUCK @ TAILGATE HEIGHT 21,746.00$ MCR-15-S2 15'-0" LONG, 201 STAINLESS STEEL, 13.8 YDS STRUCK @ TAILGATE HEIG 27,538.00$ MCR-15-S3 15'-0" LONG, 304 STAINLESS STEEL, 13.8 YDS STRUCK @ TAILGATE HEIG 29,721.00$
MCR-16-CS 16'-0" LONG, CARBON STEEL, 14.7 YDS STRUCK @ TAILGATE HEIGHT 22,275.00$ MCR-16-S2 16'-0" LONG, 201 STAINLESS STEEL, 14.7 YDS STRUCK @ TAILGATE HEIG 28,433.00$ MCR-16-S3 16'-0" LONG, 304 STAINLESS STEEL, 14.7 YDS STRUCK @ TAILGATE HEIG 30,590.00$
MCR COMMANDER BODY OPTIONS (SINGLE ACTING HOIST PACKAGE), INCLUDES HOIST, TRUNNION SUBFRAME AND REAR HINGE
HP-09-SA HOIST PACKAGE FOR 9 ' BODY 3,570.00$ HP-10-SA HOIST PACKAGE FOR 10 ' BODY 3,570.00$ HP-11-SA HOIST PACKAGE FOR 11 ' BODY 3,570.00$ HP-12-SA HOIST PACKAGE FOR 12 ' BODY 4,037.00$ HP-13-SA HOIST PACKAGE FOR 13 ' BODY 4,037.00$ HP-14-SA HOIST PACKAGE FOR 14 ' BODY 4,037.00$ HP-15-SA HOIST PACKAGE FOR 15 ' BODY 5,545.00$ HP-16-SA HOIST PACKAGE FOR 16 ' BODY 5,545.00$
MCR COMMANDER BODY OPTIONS (DOUBLE ACTING HOIST PACKAGE), INCLUDES HOIST, TRUNNION SUBFRAME AND REAR HINGE
HP-09-SA HOIST PACKAGE FOR 9 ' BODY 3,600.00$ HP-10-SA HOIST PACKAGE FOR 10 ' BODY 3,600.00$ HP-11-SA HOIST PACKAGE FOR 11 ' BODY 3,600.00$ HP-12-SA HOIST PACKAGE FOR 12 ' BODY 4,119.00$ HP-13-SA HOIST PACKAGE FOR 13 ' BODY 4,119.00$ HP-14-SA HOIST PACKAGE FOR 14 ' BODY 4,119.00$ HP-15-SA HOIST PACKAGE FOR 15 ' BODY 5,971.00$ HP-16-SA HOIST PACKAGE FOR 16 ' BODY 5,971.00$
MCR COMMANDER BODY OPTIONS (3/16" CARBON CONVEYOR COVER)SSC-09-CS 9' CARBON STEEL CONVEYOR COVER 3/16" THICK 412.00$ SSC-10-CS 10' CARBON STEEL CONVEYOR COVER 3/16" THICK 450.00$ SSC-11-CS 11' CARBON STEEL CONVEYOR COVER 3/16" THICK 488.00$ SSC-12-CS 12' CARBON STEEL CONVEYOR COVER 3/16" THICK 525.00$ SSC-13-CS 13' CARBON STEEL CONVEYOR COVER 3/16" THICK 563.00$ SSC-14-CS 14' CARBON STEEL CONVEYOR COVER 3/16" THICK 613.00$ SSC-15-CS 15' CARBON STEEL CONVEYOR COVER 3/16" THICK 661.00$ SSC-16-CS 16' CARBON STEEL CONVEYOR COVER 3/16" THICK 711.00$
MCR COMMANDER BODY OPTIONS (3/16" 201 STAINLESS CONVEYOR COVER)SSC-09-S2 9' 201 STAINLESS CONVEYOR COVER 3/16" THICK 521.00$ SSC-10-S2 10' 201 STAINLESS CONVEYOR COVER 3/16" THICK 628.00$ SSC-11-S2 11' 201 STAINLESS CONVEYOR COVER 3/16" THICK 735.00$ SSC-12-S2 12' 201 STAINLESS CONVEYOR COVER 3/16" THICK 841.00$ SSC-13-S2 13' 201 STAINLESS CONVEYOR COVER 3/16" THICK 948.00$ SSC-14-S2 14' 201 STAINLESS CONVEYOR COVER 3/16" THICK 973.00$ SSC-15-S2 15' 201 STAINLESS CONVEYOR COVER 3/16" THICK 997.00$ SSC-16-S2 16' 201 STAINLESS CONVEYOR COVER 3/16" THICK 1,021.00$
MCR COMMANDER BODY OPTIONS (1/4" AR400 CONVEYOR COVER)SSC-09-ARH 9' AR400 CONVEYOR COVER 1/4" THICK 1,140.00$ SSC-10-ARH 10' AR400 CONVEYOR COVER 1/4" THICK 1,273.00$ SSC-11-ARH 11' AR400 CONVEYOR COVER 1/4" THICK 1,405.00$ SSC-12-ARH 12' AR400 CONVEYOR COVER 1/4" THICK 1,536.00$ SSC-13-ARH 13' AR400 CONVEYOR COVER 1/4" THICK 1,668.00$ SSC-14-ARH 14' AR400 CONVEYOR COVER 1/4" THICK 1,813.00$ SSC-15-ARH 15' AR400 CONVEYOR COVER 1/4" THICK 1,958.00$ SSC-16-ARH 16' AR400 CONVEYOR COVER 1/4" THICK 2,103.00$
MCR COMMANDER BODY OPTIONS (SUB-FLOOR)BON-013089SS 9' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 280.00$ BON-013090SS 10' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 323.00$ BON-013091SS 11' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 344.00$ BON-013092SS 12' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 375.00$ BON-013093SS 13' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 406.00$
BON-013094SS 14' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 461.00$ BON-013095SS 15' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 499.00$ BON-013096SS 16' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR 531.00$
MCR COMMANDER BODY OPTIONS (SUB-FLOOR WITH CLEAN OUT DOOR)BON-013099SS 9' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT DO 883.00$ BON-013100SS 10' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT D 926.00$ BON-013101SS 11' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT D 946.00$ BON-013102SS 12' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT D 978.00$ BON-013103SS 13' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT D 1,009.00$ BON-013104SS 14' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT D 1,064.00$ BON-013105SS 15' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT D 1,102.00$ BON-013106SS 16' 201 STAINLESS STEEL REMOVABLE SUB-FLOOR WITH CLEAN OUT D 1,134.00$
MCR COMMANDER BODY OPTIONS -CHAIN BAR FLIGHT EVERY LINK09-667XH-EL 9' CHAIN BAR FLIGHT EVERY LINK 431.00$ 10-667XH-EL 10' CHAIN BAR FLIGHT EVERY LINK 491.00$ 11-667XH-EL 11' CHAIN BAR FLIGHT EVERY LINK 551.00$ 12-667XH-EL 12' CHAIN BAR FLIGHT EVERY LINK 611.00$ 13-667XH-EL 13' CHAIN BAR FLIGHT EVERY LINK 671.00$ 14-667XH-EL 14' CHAIN BAR FLIGHT EVERY LINK 731.00$ 15-667XH-EL 15' CHAIN BAR FLIGHT EVERY LINK 791.00$ 16-667XH-EL 16' CHAIN BAR FLIGHT EVERY LINK 851.00$
MCR COMMANDER BODY OPTIONS -BELT OVER CHAIN (COLD TEMP)09667XHCB 9' BELT OVER CHAIN (COLD TEMP) 2,024.00$ 10667XHCB 10' BELT OVER CHAIN (COLD TEMP) 2,236.00$ 11667XHCB 11' BELT OVER CHAIN (COLD TEMP) 2,449.00$ 12667XHCB 12' BELT OVER CHAIN (COLD TEMP) 2,662.00$ 13667XHCB 13' BELT OVER CHAIN (COLD TEMP) 2,875.00$ 14667XHCB 14' BELT OVER CHAIN (COLD TEMP) 3,154.00$ 15667XHCB 15' BELT OVER CHAIN (COLD TEMP) 3,434.00$ 16667XHCB 16' BELT OVER CHAIN (COLD TEMP) 3,713.00$
MCR COMMANDER BODY OPTIONS -BELT OVER CHAIN (HOT TEMP)09667XHHB 9' BELT OVER CHAIN (HOT TEMP) 2,443.00$ 10667XHHB 10' BELT OVER CHAIN (HOT TEMP) 2,655.00$ 11667XHHB 11' BELT OVER CHAIN (HOT TEMP) 2,867.00$ 12667XHHB 12' BELT OVER CHAIN (HOT TEMP) 3,080.00$ 13667XHHB 13' BELT OVER CHAIN (HOT TEMP) 3,293.00$ 14667XHHB 14' BELT OVER CHAIN (HOT TEMP) 3,572.00$ 15667XHHB 15' BELT OVER CHAIN (HOT TEMP) 3,852.00$ 16667XHHB 16' BELT OVER CHAIN (HOT TEMP) 4,131.00$
MCR COMMANDER BODY OPTIONS -TOP SCREENSBON-020809 9' GALVANIZED TOP SCREEN ASSEMBLY 2,333.00$ BON-020810 10' GALVANIZED TOP SCREEN ASSEMBLY 2,600.00$ BON-020811 11' GALVANIZED TOP SCREEN ASSEMBLY 2,867.00$ BON-020812 12' GALVANIZED TOP SCREEN ASSEMBLY 3,135.00$ BON-020813 13' GALVANIZED TOP SCREEN ASSEMBLY 3,402.00$ BON-020814 14' GALVANIZED TOP SCREEN ASSEMBLY 3,605.00$ BON-020815 15' GALVANIZED TOP SCREEN ASSEMBLY 3,808.00$ BON-020816 16' GALVANIZED TOP SCREEN ASSEMBLY 4,010.00$
MCR COMMANDER BODY OPTIONS -2" RISER KIT- CARBON STEELBON-013529 LONGSILL RISERS FOR 9' BODY-CARBON STEEL 417.00$ BON-013530 LONGSILL RISERS FOR 10' BODY-CARBON STEEL 479.00$ BON-013531 LONGSILL RISERS FOR 11' BODY-CARBON STEEL 521.00$ BON-013532 LONGSILL RISERS FOR 12' BODY-CARBON STEEL 563.00$ BON-013533 LONGSILL RISERS FOR 13' BODY-CARBON STEEL 604.00$ BON-013534 LONGSILL RISERS FOR 14' BODY-CARBON STEEL 646.00$ BON-013535 LONGSILL RISERS FOR 15' BODY-CARBON STEEL 690.00$
BON-013536 LONGSILL RISERS FOR 16' BODY-CARBON STEEL 732.00$ MCR COMMANDER BODY OPTIONS -2" RISER KIT- 304 STAINLESS
BON-013529S3 LONGSILL RISERS FOR 9' BODY-304 STAINLESS 525.00$ BON-013530S3 LONGSILL RISERS FOR 10' BODY-304 STAINLESS 579.00$ BON-013531S3 LONGSILL RISERS FOR 11' BODY-304 STAINLESS 613.00$ BON-013532S3 LONGSILL RISERS FOR 12' BODY-304 STAINLESS 685.00$ BON-013533S3 LONGSILL RISERS FOR 13' BODY-304 STAINLESS 738.00$ BON-013534S3 LONGSILL RISERS FOR 14' BODY-304 STAINLESS 792.00$ BON-013535S3 LONGSILL RISERS FOR 15' BODY-304 STAINLESS 690.00$ BON-013536S3 LONGSILL RISERS FOR 16' BODY-304 STAINLESS 899.00$
MCR COMMANDER BODY OPTIONS -FENDER KITS (PRICE INCLUDES INSTALLATION)
BON-013437 Single Axle Lt & Rt Fender, CS 812.00$ BON-013437SS Single Axle Lt & Rt Fender, 201 SS 1,130.00$ BON-013437S3 Single Axle Lt & Rt Fender, 304 SS 1,186.00$ BON-013438 Tandem Axle Lt & Rt Fender, CS 1,463.00$ BON-013438SS Tandem Axle Lt & Rt Fender, 201 SS 2,107.00$ BON-013438S3 Tandem Axle Lt & Rt Fender, 304 SS 2,210.00$ BON-013460 10' Full Length Lt & Rt Fender, CS 1,454.00$ BON-013460SS 10' Full Length Lt & Rt Fender, 201 SS 2,098.00$ BON-013460S3 10' Full Length Lt & Rt Fender, 304 SS 2,201.00$ BON-013461 11' Full Length Lt & Rt Fender, CS 1,569.00$ BON-013461SS 11' Full Length Lt & Rt Fender, 201 SS 2,269.00$ BON-013461S3 11' Full Length Lt & Rt Fender, 304 SS 2,382.00$ BON-013462 12' Full Length Lt & Rt Fender, CS 1,708.00$ BON-013462SS 12' Full Length Lt & Rt Fender, 201 SS 2,473.00$ BON-013462S3 12' Full Length Lt & Rt Fender, 304 SS 2,600.00$ BON-013463 13' Full Length Lt & Rt Fender, CS 1,919.00$ BON-013463SS 13' Full Length Lt & Rt Fender, 201 SS 2,778.00$ BON-013463S3 13' Full Length Lt & Rt Fender, 304 SS 2,917.00$ BON-013464 14' Full Length Lt & Rt Fender, CS 2,142.00$ BON-013464SS 14' Full Length Lt & Rt Fender, 201 SS 3,072.00$ BON-013464S3 14' Full Length Lt & Rt Fender, 304 SS 3,223.00$ BON-013465 15' Full Length Lt & Rt Fender, CS 2,280.00$ BON-013465SS 15' Full Length Lt & Rt Fender, 201 SS 3,279.00$ BON-013465S3 15' Full Length Lt & Rt Fender, 304 SS 3,441.00$ BON-013466 16' Full Length Lt & Rt Fender, CS 2,419.00$ BON-013466SS 16' Full Length Lt & Rt Fender, 201 SS 3,485.00$ BON-013466S3 16' Full Length Lt & Rt Fender, 304 SS 3,660.00$
MCR COMMANDER BODY OPTIONS -SIDE BOARDS (SHIPPED LOOSE) BON-012189 Carbon Steel side boards to fit a 09' body 452.00$ BON-012189SS 201 Stainless Steel side boards to fit a 09' body 614.00$ BON-012189S3 304 Stainless Steel side boards to fit a 09' body 732.00$ BON-012189-OAK OAK 2" X 10" X 98" side boards to fit a 09' body
217.00$
BON-012190 Carbon Steel side boards to fit a 10' body 495.00$ BON-012190SS 201 Stainless Steel side boards to fit a 10' body 676.00$ BON-012190S3 304 Stainless Steel side boards to fit a 10' body 810.00$ BON-012190-OAK OAK 2" X 10" X 110" side boards to fit a 10' body
219.00$
BON-012191 Carbon Steel side boards to fit a 11' body 540.00$ BON-012191SS 201 Stainless Steel side boards to fit a 11' body 739.00$ BON-012191S3 304 Stainless Steel side boards to fit a 11' body 889.00$ BON-012191-OAK OAK 2" X 10" X 122" side boards to fit a 11' body
221.00$
BON-012192 Carbon Steel side boards to fit a 12' body 584.00$
BON-012192SS 201 Stainless Steel side boards to fit a 12' body 803.00$ BON-012192S3 304 Stainless Steel side boards to fit a 12' body 968.00$ BON-012192-OAK OAK 2" X 10" X 134" side boards to fit a 12' body
222.00$
BON-012193 Carbon Steel side boards to fit a 13' body 628.00$ BON-012193SS 201 Stainless Steel side boards to fit a 13' body 866.00$ BON-012193S3 304 Stainless Steel side boards to fit a 13' body 1,047.00$ BON-012193-OAK OAK 2" X 10" X 146" side boards to fit a 13' body
224.00$
BON-012194 Carbon Steel side boards to fit a 14' body 669.00$ BON-012194SS 201 Stainless Steel side boards to fit a 14' body 928.00$ BON-012194S3 304 Stainless Steel side boards to fit a 14' body 1,125.00$ BON-012194-OAK OAK 2" X 10" X 158" side boards to fit a 14' body
248.00$
BON-012195 Carbon Steel side boards to fit a 15' body 710.00$ BON-012195SS 201 Stainless Steel side boards to fit a 15' body 990.00$ BON-012195S3 304 Stainless Steel side boards to fit a 15' body 1,202.00$ BON-012195-OAK OAK 2" X 10" X 172" side boards to fit a 15' body
272.00$
BON-012196 Carbon Steel side boards to fit a 16' body 751.00$ BON-012196SS 201 Stainless Steel side boards to fit a 16' body 1,053.00$ BON-012196S3 304 Stainless Steel side boards to fit a 16' body 1,281.00$ BON-012196-OAK OAK 2" X 10" X 184" side boards to fit a 16' body
297.00$
MCR COMMANDER BODY OPTIONS -SPILL PANBON-013108SS 8" OVER HANG, 201 STAINLESS STEEL 593.00$ BON-013019SS 10" OVER HANG, 201 STAINLESS STEEL 623.00$ BON-013020SS 12" OVER HANG, 201 STAINLESS STEEL 653.00$ BON-013021SS 14" OVER HANG, 201 STAINLESS STEEL 683.00$
MCR COMMANDER BODY OPTIONS -REAR AIR FOIL INSTALLED BON-012850SS Rear Air Foil, 201 SS 933.00$
MCR COMMANDER BODY OPTIONS -BODY MOUNTED CAB SHIELD (LOOSE)CP-15-CS CARBON STEEL CAB SHIELD, 15" PAN SHIPPED LOOSE 545.00$ CP-18-CS CARBON STEEL CAB SHIELD, 18" PAN SHIPPED LOOSE 545.00$ CP-24-CS CARBON STEEL CAB SHIELD, 24" PAN SHIPPED LOOSE 545.00$ CP-15-S2 201 STAINLESS STEEL CAB SHIELD, 15" PAN SHIPPED LOOSE 720.00$ CP-18-S2 201 STAINLESS STEEL CAB SHIELD, 18" PAN SHIPPED LOOSE 720.00$ CP-24-S2 201 STAINLESS STEEL CAB SHIELD, 24" PAN SHIPPED LOOSE 720.00$ CP-15-S3 304 STAINLESS STEEL CAB SHIELD, 15" PAN SHIPPED LOOSE 855.00$ CP-18-S3 201 STAINLESS STEEL CAB SHIELD, 18" PAN SHIPPED LOOSE 855.00$ CP-24-S3 304 STAINLESS STEEL CAB SHIELD, 24" PAN SHIPPED LOOSE 855.00$ CP-INSTALLED LABOR TO FACTORY INSTALL 558.00$
MCR COMMANDER BODY OPTIONS -UPPER PORTION OF FREE STANDING CAB SHEILD-STATE OF NORTH DAKOTA STYLE. INCLUDES SIDE LIGHT BRACKETS AND HARDWARE-(DOES NOT INCLUDE CHANNEL UPRIGHTS )
BON-012658SS 201 STAINLESS STEEL CAB SHIELD-NORTH DAKOTA STYLE 1,468.00$ BTE-uprights HD 6" Channel Uprights and Installation 1,110.00$
MCR COMMANDER BODY OPTIONS -CARBON STEEL BODY PAINTED CUSTOM COLOR-SINGLE STAGE ONLY- NOT BASE COAT CLEAR COAT
CC-09-CS 9' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,172.00$ CC-10-CS 10' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,210.00$ CC-11-CS 11' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,249.00$ CC-12-CS 12' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,287.00$ CC-13-CS 13' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,326.00$ CC-14-CS 14' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,365.00$ CC-15-CS 15' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,403.00$ CC-16-CS 16' ANY CUSTOM COLOR-SINGLE STAGE ON CARBON STEEL BODIES 2,442.00$
MCR COMMANDER BODY OPTIONS -OTHER OPTIONSBON-011420SS AUTOMATIC GRAVITY FED CHAIN OILER 379.00$ BON-013620SS 201 STAINLESS STEEL AND POLY GRAVEL CHUTE 2,053.00$
MCR COMMANDER MATERIAL SPREADER (SPINNER OPTIONS)RECEIVER STYLE SPINNER ASSEMBLY (BOTTOM MOUNTED MOTOR)
BON-011048 Carbon Steel 597.00$ BON-011048SS 201 Stainless Steel 644.00$ BON-011048S3 304 Stainless Steel 690.00$
HANGER STYLE SPINNER ASSEMBLY (BOTTOM MOUNTED MOTOR) 1,152.00$ BON-011645 Carbon Steel 1,152.00$ BON-011645SS 201 Stainless Steel 1,210.00$ BON-011645S3 304 Stainless Steel 1,329.00$
FRAME MOUNTED SPINNER ASSEMBLY (TOP MOUNTED MOTOR)BV2-002580 201 Stainless Steel 1,035.00$
MCR COMMANDER BODY OPTIONS -OTHER OPTIONSBON-011420SS AUTOMATIC GRAVITY FED CHAIN OILER 379.00$ BON-013620SS 201 STAINLESS STEEL AND POLY GRAVEL CHUTE 2,053.00$ LADDER-S2 201 STAINLESS STEEL FOLD UP LADDER (SHIPPED LOOSE) 437.00$ LADDER-I INSTALLATION LABOR TO INSTALL LADDER 188.00$ CPLH CORNER POST OBLONG LIGHT HOLES. PRICE PER HOLE. UP TO 3 HOLE 15.00$
COMMANDER BODY PREWET TANK SYSTEM-INCLUDES TANKS AND BRACKETS AND BASIC PLUMBING KIT. DOES NOT INCLUDE PUMP, CONTROLS OR NOZZLES. STANDARD PLUMBING IS 1-1/2", PRICE
INCLUDES INSTALLATION
TANK SYSTEM WITH CARBON STEEL BRACKETS ON A CARBON STEEL BODY.
250-CS 250 GALLON TANK SYSTEM- CARBON BRACKETS, 9' THRU 16' $ 4,831 300-CS 300 GALLON TANK SYSTEM- CARBON BRACKETS, 10' THRU 16' $ 4,933 380-CS 380 GALLON TANK SYSTEM- CARBON BRACKETS, 12' THRU 16' $ 5,787 540-CS 540 GALLON TANK SYSTEM- CARBON BRACKETS, 13' THRU 16' $ 6,157
TANK SYSTEM WITH 201 STAINLESS STEEL BRACKETS ON A CARBON STEEL BODY.
250-S2 250 GALLON TANK SYSTEM- 201 STAINLESS BRACKETS, 9' THRU 16' $ 5,355 300-S2 300 GALLON TANK SYSTEM- 201 STAINLESS BRACKETS, 10' THRU 16' $ 5,457 380-S2 380 GALLON TANK SYSTEM- 201 STAINLESS BRACKETS, 12' THRU 16' $ 6,544 540-S2 540 GALLON TANK SYSTEM- 201 STAINLESS BRACKETS, 13' THRU 16' $ 6,962
TANK SYSTEM WITH 304 STAINLESS STEEL BRACKETS ON A CARBON STEEL BODY.
250-S3 250 GALLON TANK SYSTEM- 304 STAINLESS BRACKETS, 9' THRU 16' $ 5,382 300-S3 300 GALLON TANK SYSTEM- 304 STAINLESS BRACKETS, 10' THRU 16' $ 5,484 380-S3 380 GALLON TANK SYSTEM- 304 STAINLESS BRACKETS, 12' THRU 16' $ 6,571 540-S3 540 GALLON TANK SYSTEM- 304 STAINLESS BRACKETS, 13' THRU 16' $ 7,082
PREWET PUMP KIT OPTIONSBON-FG-EPU-ECL FIBERGLASS ENCLOSURE, ELECTRIC PUMP, CLOSED LOOP 1,048.00$ BON-FG-EPU-EM FIBERGLASS ENCLOSURE, ELECTRIC PUMP, OPEN LOOP 520.00$ BON-SS-HPU-HCL STAINLESS STEEL ENCLOSURE, HYDRAULIC PUMP, CLOSED LOOP 2,051.00$ BON-SS-HPU- STAINLESS STEEL ENCLOSURE, HYDRAULIC PUMP, OPEN LOOP 1,580.00$
BON-SS-HPUHSOL4
STAINLESS STEEL ENCLOSURE, HYDRAULIC PUMP, OPEN LOOP , USES WASTE OIL 2,615.00$
PREWET OTHER OPTIONS*ADDITIONAL 1-1/2" CROSSFILL ADDITIONAL 1-1/2" CROSS FILL KIT 153.00$ *LOW LEVEL LOW LIQUID LEVEL SWITCH 55.00$ *1-1/2" MALE QUICKFILL KIT 1-1/2" MALE QUICKFILL KIT 82.00$ *1-1/2" FEMALE QUICKFILL KIT 1-1/2" FEMALE QUICKFILL KIT 82.00$ *FLUSH KIT FLUSH KIT 274.00$ *TWO NOZZLE KIT TWO NOZZLE SPRAY KIT 146.00$ *THREE NOZZLE KIT THREE NOZZLE SPRAY KIT 210.00$ *2" MALE QUICKFILL KIT
2" MALE QUICK FILL KIT110.00$
*2" FEMALE QUICKFILL KIT
2" FEMALE QUICK FILL KIT $ 110.00
BTE Install-MCR Installation of Commander Body & Hoist 2,675.00$ BON-Undecoat Petroleum Based Undercoating, per foot 60.00$ BTE-Line-X Prep body and Line-X Spray on lining on exterior front corners, sides
and tailgate 3,895.00$
VENDOR Bert's Truck Equipment Inc.CONTACT PERSON Jim McLaughlinADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56560PHONE NO. 218-233-8681 TOLL FREE 800-232-3787FAX NO. 218-233-9548 E-MAIL ADDRESS : [email protected]
Bert's Truck Equipment of Moorhead, Inc1.0-5 Price Schedule for Lighting and Misc. Options
11-Jun-18
Plow Lights, Strobes, and other Misc. OptionsSnow Plow Lights installed on
1.100 Standard Snow Plow lights on Aluminum grill,hood,Mirror mounted 1,085.00$ 1.102 Truck Light 80990 Ultra Bright LED "HEATED" Plow light kit 755.00$
1.103Installation of Truck Light LED Plow Lights on Hood mounted Aluminum Brackets or Mirror Brackets 810.00$
1.104 LED 1492115 Wing/Sander flood lights per each, installed 170.00$ 1.106 Whelen Par 36 P36LCHG Wing Sander Light installed 275.00$
Strobe Light Systems for dump bodies
1.107
Whelen DOT3401A Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 400 series light heads
2,445.00$
1.108
Whelen DOT3401B Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 400 series light heads
2,895.00$
1.109
Whelen DOT3401D Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 400 series light heads
3,132.00$
1.110
Whelen DOT3501A Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 500 series light heads
2,265.00$
1.111
Whelen DOT3501B Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 500 series light heads
2,510.00$
1.112
Whelen DOT3501D Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 500 series light heads
2,720.00$
1.113
Whelen DOT3701A Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 700 series light heads
2,325.00$
1.114
Whelen DOT3701B Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 700 series light heads
2,795.00$
1.115
Whelen DOT3701D Linear LED Strobe system, with Stainless Steel Rear Light Housings. Two Micro Freedoms, with SS Rear Housings with 700 series light heads
2,975.00$
1.116
Whelen DOT3702D Linear LED Strobe system, with Stainless Steel Rear Light Housings. One L31 Lighthead, with SS Rear Housings with 700 series light heads
1,945.00$
1.117
Whelen DOT 3405D Linear LED Strobe Light Systems with Stainless Steel Rear Housings. Two Micro 400 with 400 series light heads
3,185.00$
1.118
Whelen DOT 3705D Linear LED Strobe Light Systems with Stainless Steel Rear Housings. Two Micro 400 with 700 series light heads
3,025.00$
1.119
Whelen DOT 3410D Linear LED Strobe Light Systems with Stainless Steel Rear Housings. Two Stainless Steel Micro 400 with 400 series light heads
3,225.00$
1.120
Whelen DOT 3710D Linear LED Strobe Light Systems with Stainless Steel Rear Housings. Two Stainless Steel Micro 400 with 700 series light heads
3,295.00$
1.121 Adder for 400 Series "D" heated lens option 250.00$ 1.122 TIR3 Side Strobe for 400 and 700 series housings 140.00$
1.123Whelen Mn DOT Strobe system for Tandem Axle trucks, with Whelen Harnesses and Three par 36 work lights
2,685.00$
1.124Whelen Mn DOT Strobe system for Single Axle trucks with Whelen Harnesses and Three par 36 work lights
2,995.00$
1.125Additional S/T/T rear facing oval lights and front facing amber blinkers mounted in SS light boxes and installed on Cab shield 360.00$
1.126
BTE-HELLA- DOT-1, Two HELLA LED Light Heads, Two LED QOA Strobe Lightheads, LED S/T/T, LED backup lights, 3 light Dura-line Steel housings
1,295.00$
1.127
BTE-HELLA- DOT-2, One HELLA LED Light Heads, Two LED QOA Strobe Lightheads, LED S/T/T, LED backup lights, 3 light Dura-line Steel housings
995.00$
1.128 Whelen WPLOW1A Wing Strobe, installed 150.00$ 1.129 Whelen WPLOW3AA (includes one WPLOW 1A @ 2A Wing Stro 275.00$ 1.130 Adjustable Cab Shield Mounts 245.00$ 1.131 Adjustable Cab Shield Mounts, SS 425.00$ 1.132 Self Leveling mount for L31HAF 105.00$ 1.133 Installation of standard DOT systems 795.00$ 1.333A Installation of MN DOT Spec Whelen systems (Includes work light 1,135.00$ 1.134 Installation of Whelen Wing Strobe 165.00$ 1.135 Body Builder upfitter wiring harness (If not provided by chassis dea 395.00$
1.136LaserLine GL3000PMC wing Guidance Laser for Wing Plow (includes wing activation switch)
2,575.00$
1.137 Installation of GL3000PMC Laser on body cab shield 330.00$ 1.138 PowerSmart PSM10-SA Power Smart Board 445.00$ 1.139 PS-1000 8' power Smart indicator Cable Each 30.00$ 1.140 PS-1001 Power Smart Switch Cable, each 40.00$ 1.141 PS2000 Power Smart 2 Pin Wpak Sensor Fly leads, 18', each 38.00$ 1.142 Installion on power Smart board 110.00$ 1.143 Bonnell/BTE stand alone wiring harness, fuse panel, and switch ba 2,500.00$ 1.144 Installtion of MN DOT Supplied MN star Harness assembly 2,200.00$
VENDOR Bert's Truck Equipment Inc.CONTACT PERSON Jim McLaughlinADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56560PHONE NO. 218-233-8681 TOLL FREE 800-232-3787FAX NO. 218-233-9548 E-MAIL ADDRESS : [email protected]
Bert's Truck Equipment of Moorhead, Inc1.0-6 Price Schedule for Varitech Pre Wet systems
11-Jun-18
Pre-Wet systems by Varitech Industries, IncTailgate Systems
1.150 VAR-TG075 ,75 Gal.Tank Kit 372.00$ 1.151 VAR-TGO75-MK-PC-ADJ Mounting Kit 851.00$ 1.152 VAR-TGO75-MK-SS-ADJ Stainless Mounting Kit 1,890.00$ 1.153 VAR-TG-00, 100 Gal.Tank Kit 442.00$ 1.154 VAR-TG100-MK-SS-ADJ Stainless Steel Mounting Kit 1,363.00$ 1.155 VAR-TG100-MK-PC-ADJ Mounting Kit 874.00$ 1.156 VAR-TG150, 150 Gal.Tank Kit 550.00$ 1.157 VAR-TG150-MK-PC-ADJ Mounting Kit 944.00$ 1.158 VAR-TG150-MK-SS-ADJ Stainless Steel Mounting Kit 1,620.00$ 1.159 VAR 9503X001 TG-CS Quick fill Tailgate & cab shield 107.00$ 1.160 VAR 9504X001 TG-CS Suction Plumbing Kit Tailgate & cab 97.00$ 1.161 VAR 9505X003 TG-CS-fm Dishcharge 3 nozzle kit 102.00$ 1.162 VAR 9510X002 EGF pre wet kit -1 nozzle 12VDC, Plunger Valve
Gravity222.00$
1.163 LDS8009X001 Low Level Indicator Swithc Assm. With W pack Connector
48.00$
1.164 VAR-TM-EPU-EM tank mount Electric/manual power unit only (no controls)
194.00$
1.165 VAR-FG-EPU-EM Electric/manual power unit only FG eclosure (no controls)
331.00$
1.166 LDS 1101X020 20 Amp Driver with cables and mounting hardware
555.00$
VAR-TM-HPU-HOL Tank Mounted Hydraulic Closed loop Power unit only
843.00$
1.167 VAR-TM-HPU-HCL Tank Mount Hydraulic Closed Loop, Power unit only (can be used on radius tanks also)
1,217.00$
1.168 TM-HPU-HCL-IP68 Tank Mount Hydraulic Closed Loop, Power unit only (can be used on radius tanks also)
1,334.00$
1.168 VAR-SS-HPU-HCL Hydraulic Closed loop Power Unit Only in Stainless Steel Enclosure (can be used on radius tanks also)
1,512.00$
1.169 VAR-SS-HPU-HCL-IP68 Hyd Closed loop power unit with IP68 Flow meter Cable
1,628.00$
1.170 Installation of Tailgate Gravity Feed pre-wet systems 735.00$ 1.171 Installation of Tailgate Electric or Hydraulic pre-wet systems 955.00$
Radius Body Tanks & Systems1.172 VAR-RB110 Two 55 Gal. Dual lid Radius Body Tanks 728.00$
1.173 VAR-RB120 Two 60 Gal. dual lid Radius Body Tanks 762.00$
1.174 VAR-RB120 -DT-MK-PC 60 Gal. Radius Body Stainless Steel Tank Mounting Kit
1,281.00$
1.175 VAR-RB190 Two 95 Gal. dual lid Radius Body Tanks 916.00$ 1.176 VAR-RB200 Two 100Gal. dual lid Radius Body Tanks 928.00$
1.177 VAR-RB200-DT-MK-PC 100 Gal. Radius Body Stainless Steel Tank Mounting Kit (custom kit with 10" reciever tubes)
2,395.00$
1.178 VAR-RB200-DT-MK-PC 100 Gal. Radius Body Stainless Steel Tank Mounting Kit (custom kit with 10" reciever tubes and inner
3,189.00$
1.178 VAR 9516x002 RB-DT Quick fill suction kit radius tank (dual) (gravity)
351.00$
1.179 VAR 9510X002 EGF pre wet kit -1 nozzle 12VDC, Plunger Valve Gravity
222.00$
1.180 LDS 8009X001 Low Level Switch Assm 48.00$ 1.181 HPU releif valve kit Hydraulic Power unit 63.00$
1.182 Installtion of Gravity feed Radius Tank Pwe-wet systems 1,370.00$ 1.183 Installtion of Hydraulic feed Radius Tank Pwe-wet systems 1,590.00$ 1.184 Inbound shipping to Bert's for Tailgate system 100.00$ 1.185 Inbound shipping to Bert's for Radius Body system 125.00$ 1.186 Outbound shipping FOB Alexandria, MN (per mile maximum) 1.50$
VENDOR Bert's Truck Equipment Inc.CONTACT PERSON Jim McLaughlinADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN 56560PHONE NO. 218-233-8681 TOLL FREE 800-232-3787FAX NO. 218-233-9548 E-MAIL ADDRESS : [email protected]
