10 June 20031 Manual Door Operation. 10 June 20032 Operate Doors Allows you to remotely operate...
-
Upload
candice-short -
Category
Documents
-
view
215 -
download
0
Transcript of 10 June 20031 Manual Door Operation. 10 June 20032 Operate Doors Allows you to remotely operate...
10 June 2003 2
Operate Doors
• Allows you to remotely operate individual doors or sets of doors– Locking– Unlocking– Updating
10 June 2003 3
Open the Operate Doors Window
• Click the Operate Doors tool bar button
OR
• Select the Operate > Doors pull-down menu option
10 June 2003 4
Operating Doors
• Door operation commands are performed on selected doors– Select the Door Class– Select the specific doors– Perform the command– View the status/results
10 June 2003 5
Door Class
• Categorizes doors by physical location– Assigned by door in the Setup > Doors section
• Allows actions to be performed by category– All, Interior, Exterior
Exterior Door Class
All Exterior Doors
10 June 2003 6
Select the Door Class
• Click on the icon corresponding to the desired door class
• Highlighted icons display the active door classes
10 June 2003 7
Select the Doors
• Click on the icon corresponding to the desired doors
• Highlighted icons display the active doors
10 June 2003 8
Selecting/Deselecting All Doors
• Quickly select all doors within a door class by clicking the button
• Quickly deselect all doors within a door class by clicking the button
10 June 2003 9
Lock Operation
• Click the button to immediately lock all selected doors
• The status of the operation is displayed
10 June 2003 10
Unlock Operation
• Click the button to immediately unlock all selected doors
• The status of the operation is displayed
10 June 2003 11
Timed Unlock Operation
• Click the button to immediately unlock all selected doors for a specific period of time– Assigned by door in the Setup > Doors section
• The status of the operation is displayed
10 June 2003 12
Update Doors Operation
• Click the button to immediately perform a database update for all selected doors’ controllers
• An intermediate status window appears, showing the individual updates being performed
• When complete, operation status is displayed