7/28/2019 10 apr 2013 SAP

1/1

You can only add a tab in the production order screen. In the tab view you need to add your z-fields. You need to do that with exit

PPCO0012

Use SE51, enter program name as SAPLXCO1 and screen name as 0100 and create it as sub screen (attributes section).

Click on Layout button create field descriptions and fields. The field names will appear in element list tab.

You can control these field (if you want allow input or make them grey out) in the include ZXCO1O01

You can add up to 8 extra fields for production order

......................................................................................................................................................................................................................

D/d

D/D/

/Kz''>

h'

/

W

/

you

can Use MI10 directly to enter the correct count and post

Status of Physical Inventory Document, check in t.code:MI24

Inspection type 08 is just a Stock transfer inspection; you can use this from stock transfer within Plant/ another plant, from 1 sloc to other

sloc. Inspection type 08 is better than 05.

WD/Y^D/

Go to QCC4 -> Inspection Characteristic, Inspection Method -> Define Default Values for Control Indicators

Click on new entries, Enter Control key say z200, tick on Quanti. chara., Enter short text

Enter -> Maintain the required fields SAY- "Qualitative insp. char., Summarized recording, Optional char., ScpNotFixed"

Save your entry .After this setting, when you go for creation of MIC in preset indicator enters z200, you will see the defaults under control

indicator.

...........................................................................................................................................................................................................................

Criteria to explode BOM -BOM application type is you using in CS11/CS12, (PP01 prod. Mfg , PI01- Proc. Mfg , zp01- rework, BEST-

Inv. Mgmt) Their configuration- Go to OS30, look up the selection ID for the BOM application, then go to OS31 and add your usage type xx

in the priority.

.......................

System allow to do batch leveling for Client to material only, if u want to do leveling u need to consume/empty all batches in that plant

...................................................................................................................................

Status of Released (REL) Production Order can be possible to bring back as created (CRTD) by = menu-functions read pp master data

While Reading the master data, system once again select the BOM and routing and explodes the both. Material availability, scheduling

and costing will be performed once again.

..................................................................Already one process order is in release condition the system should give error while releasing another order with sameresource. &has single line operation.Using the OPJK options for the Capacity availability to avoid Releasing of order (Option'3-No release if capacity is insufficient')....................................For Copying of Inspection results from one Inspection lot to another during Results Recording :-Configuration:-In SPRO-> Quality Management-> Quality Inspection-> Make Settings for Copy of Inspection Results

Control in Insp. Lot & Control in Data Transfer: - selectManual & Automatic data Transfer

the inspection plan for each MIC for which you want to copy , you have maintained in General Data > Origin Result data > 02 previous

inspection .For the Inspection Types (viz., 04, 09, etc.), maintained the Origin TL as 02, Data Orig. RR as 02, Selection as 300 and

Mapping as 200 for 04 Inspection type and

100 for inspection type 09 Moreover also ticked the Log checkboxes.

1) Kindly does the setting for 04 inspections as follows:-

Control in Inspection lot - 3 Manual & Automatic

Control in RR - 2 Automatic data Transfer, Origin TL 02, Data origin - 02, Selection 300, Mapping 200, Del Day 0, log UN tick

2) make sure that Enterprise framework EA-PLM is active. You can check with the help of Code SFW5