1 The National Physical Laboratory of Israel in 2005.

1

The National Physical Laboratory of The National Physical Laboratory of IsraelIsrael

in 2005in 2005

2

ContentsContents

Visiting card (slide 3) Location (slide 4) History (slide 5) Logo (slide 6) Organizational chart and contact

persons (slide 7) Staff (slides 8-9) Calibration scope (slides 10-19) Price list (slide 20) Links (slide 21)

3

The National Physical Laboratory of The National Physical Laboratory of Israel (INPL)Israel (INPL)

The Hebrew University of Jerusalem, Danciger “A” Bldg, Givat Ram, Jerusalem 91904

tel.: +972-2-5661856; fax: +972-2-6520797

4

LocatioLocatio

nn

5

History of INPL and the Metre History of INPL and the Metre ConventionConvention

- established in 1950 as a national metrology institute (NMI) by analogy with National Physical Laboratory in UK;

- representing Israel since 1985 at BIPM and other forums of the Member States of the Metre Convention (MC);

- signed in 2003 the Mutual Recognition Arrangement of National Measurement Standards and of Calibration and Measurement Certificates Issued by NMIs (drawn up by the CIPM under the authority given to it in the MC);

- accepted in 2004 by EUROMET as a corresponding NMI.

6

Logo Logo

The following ideas are used in the logo:

1) the known metrological “pyramid” with increased uncertainty to the bottom (from a measurement standard to the field measurements); the pyramid illustrating traceability chains, built in opposite to uncertainty direction (from a field measurement to the standards); such two triangles form the David’s Shield – the historical symbol of Jewish people;

2) white and blue colors are the colors of the Israeli flag.

7

Organizational chart of INPLOrganizational chart of INPL(a department of the Ministry of Trade, Industry and (a department of the Ministry of Trade, Industry and

Labor) Labor) and contact personsand contact persons

Scientific Director Dr. Ilya Kuselman

Technical Director Mr. Grisha Deitch Quality Manager

Dr. David Kisets

Lab. of Physical

Standards (length, temperature, mass, electrical parameters, plane angles, pressure, optics)

Mr. Claude

Apfeldorfer

Lab. of Frequency and Time

(calibration of oscillators, atomic clocks and GPSs)

Dr. Nadya Goldovsky

Lab. of Materials (chromatography, spectrophotometry, atomic absorption, gravimetry, volumetry and electrochemistry)

Dr. Ilya

Kuselman

Lab. of Field Measurements

(calibration of analyzers “on-line”, sampling and environmental analysis)

Mr. Shamay

Shpitser

8

StaffStaff

Division Name Responsibility Telephone number as +972-2- …

E-mail as

…@moital.gov.il

Administrative Mr. Grisha Deitch Dr. Ilya Kuselman

Ms. Dina Zaken Mr. Yaniv Shalom

Technical Director Scientific Director and Head of Materials Lab Assistant Book-keeper

6662296 5661856

5635698 5635698

grisha ilya.kuselman

dina yaniv.s

Lab of Physical Standards

Mr. Claude Apfeldorfer Dr. David Kisets

Dr. Emil Kiselgof

Ms. Galina Tsirulnikov

Dr. Israel Paperno Ms. Ester Kobliakov

Mr. Moshe Mosel

Head of the Lab INPL Quality Manager; temperature

Mass, length, plan angles, and electricity

Orders; interferometry Pressure and vacuum

Humidity

Optics

5664976

5664976

5664976

5664976

5664976

5664976 5664976

claude.ap david.ki

emil.ki

galina.ch

claude.ap

esther.ko

claude.ap

9

Staff - continuationStaff - continuation

Division Name Responsibility Telephone number as +972-2- …

E-mail as

…@moital.gov.il

Lab of Frequency

and Time

Dr. Nadya Goldovsky

Mr. Michael Luria

Frequency & time, electrical parameters

6536534

6536534

nadya.go michael.lu

Lab of Materials Dr. Elena Kardash Mr. Boris Anisimov

Dr. Marina Pavlichenko

Ms. Irina Goldfeld

Electrochemistry

Chromatography; atomic absorption; INPL PC system administrator

PT providing for local analytical labs

Orders; gravimetry, volumetry, potentiometry, spectrophotometry, atomic absorption

6536534

5618531

6536534

6536534

lena.ka

boris.a

maria.fa

irena.go

Lab of Field Measurements

Mr. Shamay Shpitser

Ms.Rina Monson’ego

Sampling and environmental analysis, calibration “on-line”

6513221

6513221

shamay.sh

rina.mo

Workshop Mr. David Simantov Technical support 5635698 dina

10

Measured Quantity, Instrument

Range

Best Measurement

Capability

Reference

Document

Measurement Standards

Gauge Blocks

0.5 – 100 mm

from 0.024 to 0.038 µm

Instruction Manual of TESA Interferometer

Automatic Gauge Block Interferometer

Gauge Blocks

0.5 – 100 mm

from 0.05 to 0.10 µm

Instruction Manual of TESA Comparator

Standard Gauge Blocks; TESA UPC Comparator

Gauge Blocks and Length Bars

25 - 600 mm from 0.04 to 0.3 µm

Instruction Manual of Federal Comparator

Standard Gauge Blocks and / or Length Bars; Federal Comparator

Gauge Blocks and Length Bars

600 – 1200 mm

from 0.6 to 1.2 µm

BCS The Calibration of

Length Bars

Standard Gauge Blocks and / or Length Bars; Matrix Level Comparator

INPL calibrationINPL calibration scope. Lengthscope. Length

11

Measured Quantity,

Instrument

Range

Best

Measurement Capability

Reference Document

Measurement Standard

Weights 1mg - 20kg

from 0.8 µg for 1mg up to 3mg for 20kg

DIN-1305; OIML R-

111

Standard Weights; Mass Comparator Balances

INPL calibrationINPL calibration scope. Massscope. Mass

12

INPL calibrationINPL calibration scope. scope. Frequency and timeFrequency and time

Measured Quantity,

Instrument

Range

Best

Measurement Capability

Reference Document


Oscillators, Clocks and GPS receivers

1Hz - 10MHz

10-14 for frequency

5 ns for

time sale

In-house method

UTC (INPL); Cs Atomic clocks and time interval counter; GPS Time Transfer System TTR-5

13

INPL calibrationINPL calibration scope. Electrical scope. Electrical parametersparameters


Range

Best Measurement

Capability

Reference Document


Electric Potential DC Voltage reference standards

1V ; 1.018V 10V

0.015 ppm 0.15 ppm

DFM procedure

Josephson System, DC reference voltage standards; Multimeter HP 3458A

Electrical resistance

DC standard resistors

0.1 1 10

100 1000

10.000 100.000

1 M

0.5 ppm 0.15 ppm 0.2 ppm 0.3 ppm 0.4 ppm 0.5 ppm 2 ppm 3 ppm

Technical manual for model 9975 Guideline

Standard resistors. Guildline current comparator resistance bridge model 9975; Guideline transfer standard resistor model 9350 / 10ohms

14

INPL calibrationINPL calibration scope. scope. TemperatureTemperature


Reference Document

Best Measurement

Capability

Range


Triple point cells, Tinsley Automatic AMBASSADOR bridge

NIST Technical Note 1265

1.1•10-3 °C 0.01°C Triple point of water

SPRTs with Tinsley Automatic AMBASSADOR bridge


1.8•10-3 °C 1.6•10-3 °C 1.6•10-3 °C 1.8•10-3 °C 2.0•10-3 °C

- 30°C 0°C

50°C 100°C

150-250°C

SPRT

SPRTs with Tinsley Automatic AMBASSADOR bridge


3.0•10-3 °C

11•10-3 °C

21•10-3 °C

51•10-3 °C

0-50°C (0.01°C/div) - 30-100°C (0.1°C/div) 100-200°C (0.2°C/div) 200-250°C (0.5°C/div)

Precision mercury-in-glass thermometers

15

INPL calibrationINPL calibration scope. Temperature - scope. Temperature - cont.cont.

Measured Quantity,

Instrument

Range

Best Measurement

Capability

Reference

Document


Type S and type R thermocouples

0-600°C 600 -

1100°C

0.40°C 0.50°C

NIST Technical note 1265; NIST

Monograph 175

Reference thermocouples type S; Multimeter Datron 1281

Thermometers -30 - 250°C 0.02 - 0.1°C

1) OIML guide to practical temperature measurements 2) NPL Techniques of temperature measurement

Standard mercury in glass thermometer

Optical pyrometers (Visual disappearing filament pyrometers)

800-1600°C

2.6 – 4.9 °C 1) OIML R-18; OIML guide to practical temperature measurements; 2) NPL Techniques of temperature measurement

Standard Ribbon-Filament Lamp

16

INPL calibrationINPL calibration scope. Plane anglescope. Plane angle

Measured Quantity,

Instrument

Range

Best Measurement

Capability

Reference Document

Measurement

Standard

Angle Gauges up to 360° 2' - 13'

0.2" 0.5"

NBSIR 80-1967

Standard indexing table

Precision polygons up to 360° 0.5" “Precision polygons” HILGER & WATTS, BZ125


Indexing tables up to 360° 0.1" NBSIR 80-1967


Autocollimators up to 15' 0.1" K.J. Hume “Metrology with autocollimators” HILGER & WATTS, London 1965


17

INPL calibrationINPL calibration scope. Pressurescope. Pressure

Measured Quantity,

Instrument

Range Best Measurement

Capability

Reference Document


Pressure gauges

8.3-170 kPa (gas)

26-39 ppm EAL Technical guide line;

OIML R-101

Measurement by Dead Weight Testers

Pressure gauges

40- 6900 kPa (gas)

30- 44 ppm EAL Technical guide line;

OIML R-101


Pressure gauges 1.0-7.6 MPa

(oil)

34 ppm EAL Technical guide line;

OIML R-101


Pressure gauges

7.5-120 MPa (oil)

31-38 ppm EAL Technical guide line;

OIML R-101


18

INPL calibrationINPL calibration scope. Standards scope. Standards under development: physical fieldsunder development: physical fields

Measured Quantity,

Instrument


Capability

Reference Document


Capacitors 1 pF -10 µF 10 -100 ppm

R.D.T. Electronics Engineering instruction

Standard capacitance measuring assembly: Gen Radio 1404A,B&C and 1620 Capacitance bridge

Standard Platinum Resistance Termometers (SPRT)

234.3116 K 302.9146 K 505.078 K 692.677 K

933.473 K

1.1 mK 1.0 mK 1.1 mK 1.1 mK

4.1 mK

BIPM calibration certificates

Fixed points: a) triple point of mercury, b) melting point of gallium, c) freezing point of tin, d) freezing point of zinc, e) freezing point of aluminuim

Illuminance meters

10-3 - 5·105 lx 2% Calibration certificates for

standard lamps; LMI manual B 500

Standard luxmeter and standard lamps

19

INPL calibrationINPL calibration scope. Standards scope. Standards under development: amount of under development: amount of

substancesubstance

Measured Quantity,

Instrument


Capability

Reference Document


pH-meters, glass electrodes, solutions

3.5 – 10.0 pH 0.006 pH IUPAC recommendation

– 2002; NIST special publication

260-53

pH standard including Pt/Pt, hydrogen electrode

Conductometers, conductivity cells and solutions

5·10-4 - 5·10-3 S/m 5·10-3 – 10 S/m

1% 0.1%

NIST special publication

260-142

Electrolytic conductivity standard

Analytical instruments, substances and materials

0.01 ppb – 100% Specific for every analyte and sample matrix, for

every method

Variety of specific

documents

GC, GC-MS, HPLC, AAS with flow injection system, UV-Vis spectrophotom. etc.

20

Price listPrice list

Calibration price list and other information in Hebrew are available in the webpage of the Ministry of Trade, Industry and Labor:

http://www.moital.gov.il/NR/exeres/2F38C195-3662-4274-9A85-C61671D8C5E4.htm

For more information please contact Dr. Ilya Kuselman by e-mail: [email protected]

21

Links to national and international Links to national and international organizations collaborating with INPLorganizations collaborating with INPL

International Bureau of Weights and Measures (BIPM) -

European Collaboration in Measurement Standards (EUROMET) -

National Conference of Standards Laboratories – International (NCSLI) –

Co-operation on International Traceability in Analytical Chemistry (CITAC) -

Israeli Metrological Society (IMS) -

Israel Society for Quality (ISQ) -

Israel Analytical Chemistry Society (IACS) -

www.bipm.fr

www.euromet.org

www.ncsli.org

www.citac.cc

www.science.co.il/ims

www.forumsci.co.il/analchem

www.isq.org.il

1 The National Physical Laboratory of Israel in 2005.

Documents

Transcript of 1 The National Physical Laboratory of Israel in 2005.