1 SURFACE ENGINEERING (2) THERMAL SPRAY Prof. Priit Kulu, Andrei Surzhenkov.
-
Upload
ashley-burns -
Category
Documents
-
view
219 -
download
0
Transcript of 1 SURFACE ENGINEERING (2) THERMAL SPRAY Prof. Priit Kulu, Andrei Surzhenkov.
1
SURFACE ENGINEERING (2)
THERMAL SPRAY
Prof. Priit Kulu, Andrei Surzhenkov
2
Surface properties of material/part
Wear− mechanical;− corrosive-mechanical.Criteria: wear resistance (by mass/volume, relative)
Methods of surface reinforcement− peening;− surface alloying and hardening;− coatings (sprayed coatings, vapor deposited coatings, cladded
coatings, galvanic coatings, diffusion coatings);− metal cladding (bimetal materials).
3
Coating-substrate system
4
Structures’ types of the coatings
5
Coatigns’ processes
CHEMICAL ELECTROCHEMICAL THERMOCHEMICAL THERMOCOATING VAPOR DEPOSITION MECHANICAL
6
Comparison of the coating processes
7
Thermal spray methods
CHEMICAL ELECTROCHEMICAL THERMOCOATING VAPOR DEPOSITION MECHANICAL
cold gas spraying
(CGS)
laser spraying
(LS)
molten-metal
flame spraying
Thermal spraying
8
Typical structure of a coating
Sprayed coating’s structure
9
Sprayed coatings’ materials
10
Flame spraying
- flame temperature:• acetylene/oxygen 3160 ºC;• propane/oxygen 2850 ºC;• hydrogen/oxygen 2660 ºC.
- sprayed materials:• wire: metals and metal alloys;• powder: pure metals, alloys, oxides, cermets,
composite powders.
11
Arc spraying
• temperature inside the arc: 6500 ºC;• voltage 18 – 40 V, current 50 – 150 A;• sprayed materials: electroconductive alloys,
ceramics can be deposited, when using core wires.
12
Plasma spraying
• plasma temperature: up to 30000 ºC.• virtually all existing materials.
13
Plasma transfered arc spraying (PTA)
• Fe, Ni, Co, Cr based alloys, stainless steels, cermets
14
Laser cladding
• virtually all metal alloys, cermets and ceramics.
15
Detonation gun spraying
• flame temperature: 4000 ºC.
16
High-velocity oxy fuel spraying (HVOF)
• gas temperature: 3000 ºC;• sprayed materials: virtually all existing
materials, in practice mostly carbide/metal
and carbide / self-fluxing alloy mixtures.
17
Cold spraying
• gas temperature: under the
phase transition temperature;• sprayed materials: pure Al, Zn, Cu, Ni
and babbites.
18
Thermal energy vs. kinetic energy in thermal spray
Thermal Energy
Kinetic Energy
WARCS
PS
FS
HVOF
CS
Wirearc Spray
Plasma Spray
Flame Spray
High velocity oxy fuel
Cold Spray
Melt or partially melt
Solid
19
Coatings’ properties (1). Influence of velocity and temperature
20
Coatings’ properties (2). Adhesion and porosity
Spray technology Velocity, m/s Porosity, % Adhesion, MPa
Flame spraying• powder• wire
30180
6 – 15 17 – 7015 – 20
Arc spraying 240 2 – 8 40
Plasma spraying (different modifications)
240 – 1200 < (0,5 – 2) 20 – 70
Detonation gun spraying 910 < 1 ≥ 100
HVOF, HVAF 610 – 1500 < 0,5 62 – 83
Cold spraying 500 – 1200 1 – 3 30 – 100
21
Coatings’ properties (3). Obtainable harndess.
Sprayed material Spraying technology Hardness, HV
Chrome steel Flame spraying (wire) 500 – 600
PTA 800 – 850
NiAl alloy Flame spraying 200 – 250
Copper Flame spraying (powder) 150
Stellite Flame spraying (powder)/HVOF 460 – 770
PTA 290 – 590
MCrAlY Plasma spraying 400
Self-fluxing alloy (NiCrSiB) Flame spraying/HVOF 250 – 780
PTA 360 – 820
WC-Co Plasma spraying (powder)/HVOF
1100 – 1300
Al2O3 Plasma spraying 1800 – 2000
22
Coatings’ properties (4). Microhardness of WC-17Co coating, sprayed using
different technologies.HV0.3
23
Coatings’ properties (4).Wear vs. spray method
0
100
200
300
400
500
600
700
800
1 2 3 4 5 6
Wei
ght L
oss
(mg)
7PSZ
Al2O3Cr2O3
22x 32x 21x
APS HVOF APS HVOF APS HVOF
24
Coatings’ properties (5) Hardness vs. fracture toughness
25
Applications of sprayed materials
26
Applications (1) wear resistant coatings
(pumps, compressors, camshafts, etc.) – except for cold spraying;
corrosion resistant coatings (pipelines, building constructions, etc.);
27
Applications (2) temperature resistant and
dielectrical coatings (gas turbines, flue tubes);
antifriction coatings (sliding bearings);
size restoration (shafts, bearings, etc.)
28
Applications (3).HVOF sprayed pot rolls for continuous galvanizing line
for steel strips.
29
Applications (4)Sprayed coatings in an aircraft engine
30
Applications (5)Process automation. Flame spraying by Kuka robot.
31
Thank you for the attention!
Questions?