5 x

7”

(E

nv5

¼ x

7 ¼

”) 5

x 6

.5” (E

nv5

¼ x

7 ¼

”)

5¾ x 5¾” (Env 6 x 6”)

4¼ x 5½” (A2 Env 4 3/8 x 5¾ ”)

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/

1. Square or Circle Template

Print on transparency for best results. Use for centering stamps or shifting the template to the left, right, lower or higher depending on where you want your stamp to appear. You can also trim to your favorite card size. Cut off top to green line.

5 x

7”

(E

nv5

¼ x

7 ¼

”) 5

x 6

.5” (E

nv5

¼ x

7 ¼

”)

5¾ x 5¾” (Env 6 x 6”)

4¼ x 5½” (A2 Env 4 3/8 x 5¾ ”)

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/

2. Rectangle Template

Print on transparency for best results. Use for centering stamps or shifting the template to the left, right, lower or higher depending on where you want your stamp to appear. You can also trim to your favorite card size. Cut off top to green line.

5 x

7”

(E

nv5

¼ x

7 ¼

”) 5

x 6

.5” (E

nv5

¼ x

7 ¼

”)

5¾ x 5¾” (Env 6 x 6”)

4¼ x 5½” (A2 Env 4 3/8 x 5¾ ”)

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/

3. Upright Oval Template

Print on transparency for best results. Use for centering stamps or shifting the template to the left, right, lower or higher depending on where you want your stamp to appear. You can also trim to your favorite card size. Cut off top to green line.

5 x

7”

(E

nv5

¼ x

7 ¼

”) 5

x 6

.5” (E

nv5

¼ x

7 ¼

”)

5¾ x 5¾” (Env 6 x 6”)

4¼ x 5½” (A2 Env 4 3/8 x 5¾ ”)

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/

Print on transparency for best results. Use for centering stamps or shifting the template to the left, right, lower or higher depending on where you want your stamp to appear. You can also trim to your favorite card size. Cut off top to green line.

4. Horizontal Oval Template

4.8 x 6.3 “ 14.8 cm x 10.5 cm5. Rectangular Grid

6. SquareGrid

4

Center Weighted - 3

3

7. 3 Positioning Templates

• Print on plain paper,• Cover templates with

clear packing tape and cut.

• Place card on Stamping tool. Overlay card with template, matching card edges to desired template. The pink lines are one set of measurements, green dashed sized for a different card, etc. See sample in instructions. Can also use for placing stamps between lines.

• Place stamp in desired position, eg are three lines centerd in middle with distance around edges.

F A I T H

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/

Use to make circular print

than th

e h

exagon

Circle Template

10.Circular Printing Hex Template

Print on white paper. Cover with clear packing Tape (see instructions for tip). The desired circle size must be smaller than the hexagon. The hexagon must fit in your stamping tool, Enlarge or shrink to fit. (Can copy it to PowerPoint to change size)

Place stamp(s) along line. Curve text to

Fit stamp on circle. Attach centered circle to be stamped with masking tape or repositionaltape to circle template. May have to add additional tape to stamp to make it curve properly.

Apply ink (may require more than 1 application), rotate. Stamp.

Can also be used for printing on a Hexagonal cut label.

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/

1. For more precise object positioning (e.g. tag, cutouts, etc.), apply Double Sided Sticky Tape or Dimensional Dots to back of object.

2. Add repositional or painter’s tape [less sticky masking tape] to front of object. Stick / center object on template. Hover template over card or desired area until object is in position. Adhere object.

Layered Stamping using Hinged Stamping Tool (or 3s Not a Crowd)

1. Make stamp mask: Stamp on post-it or scrap paper. Stamp on card, when inked and dry, cover with mask.

2. Continue inking and masking .

Positioning an object using the templates

Remove masking tape carefully and quickly,or it will ruin your object.

Fixing Broken Stamping using Hinged Stamping Tool

1. Stamp background2. Object should be shaded. Add repositional or

masking tape to object and stick on transparency (Top of object to back of transparency).

3. Move template, hovering until in desired spot. Apply object to position

4. Stamp only top part of overlaying stamp.

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/

1. You can laminate or use a clear sticky sheet instead of clear packing tape.

2. To use packing tape for Templates• Stick 2 rows of masking tape parallel. Roll the edges and

place sticky side up.

• Using clear packing tape make overlapping columns until desired size.

• Place sheet (print side down) over top of tape.• Trim to size.

Masking Tape Sticky Side Up

Masking Tape Sticky Side Up

Sticky Side Up

Sticky Side Up

If you have stamps that are so sticky they pull up envelope/paper, use template in between. Remove

template before stamping. Make sure to clean template before using again.

To Stamp with Template and Stamping Tool

1. Put paper or envelope in Stamping tool, making sure that it is straight.

2. Place template over paper or envelope. Add magnets to keep in place

3. Add stamp facing down to template.

4. Lower top, make sure that stamp is in correct position. Remove magnets.

5. Remove template. Add magnets to envelope / paper and ink stamp. Close lid to stamp.

Clear Packing Tape “Laminating”

TIP: Sticky Stamps

To Stamp using Templates no Stamping Tool

Tools Required• Clear acrylic picture frame, preferably larger

than card and thick (thicker is better for more even stamping) The frame should have two layers.

• Optional - Clear film or tablet protector for outside (protects acrylic from becoming stained when cleaning stamps)

1. Place template on inside. Add stamps to desired position.

2. Make sure to use enough ink, you will only be able to stamp once, unless you have a very steady hand.

www.craftsuprint.com http://www.craftsuprint.com/kyera-lea-69118/