1 Reinforced Concrete Design II Lecture 13 Dr. Nader Okasha.
1 Reinforced Concrete Design II Lecture 9 Dr. Nader Okasha.
19
1 Reinforced Concrete Design II Lecture 9 Dr. Nader Okasha
-
Upload
camron-marshall -
Category
Documents
-
view
404 -
download
52
Transcript of 1 Reinforced Concrete Design II Lecture 9 Dr. Nader Okasha.
12
Biaxial bending in columns
Design Procedure for biaxial bending:
A- Determine reinforcement based on the biaxial bending capacity:
1- Determine the dimensions based on a reasonable stress in the column.2- Determine in the week axis direction (any direction for square sections.3- Calculate the biaxial bending moment in the week axis direction.4- Use an interaction diagram to design the reinforcement for the section.
B- Use the Bresler equation to check the axial capacity of the section
1- Calculate Pnx from the interaction diagram assuming only Mnx is applied.2- Calculate Pny from the interaction diagram assuming only Mny is applied.3- Calculate P0.4- Calculate Pn and check un PP