1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called...

65
1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers can be naturally occurring (e.g. polysaccharides and proteins) or synthesized in a laboratory (synthetic). Polymerization is the joining together of monomers to make polymers. Polymers prepared by the polymerization of a single monomer are called homopolymers. Numerous consumer products are made from synthetic polymers.

Transcript of 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called...

Page 1: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

1

Polymers

Introduction

• Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together.

• Polymers can be naturally occurring (e.g. polysaccharides and proteins) or synthesized in a laboratory (synthetic).

• Polymerization is the joining together of monomers to make polymers.

• Polymers prepared by the polymerization of a single monomer are called homopolymers.

• Numerous consumer products are made from synthetic polymers.

Page 2: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

2

Polymers

Introduction Figure 30.1 Polymers in some common consumer products

Page 3: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

3

Polymers

Introduction

• Synthetic polymers may be classified as either chain-growth (addition) or step-growth (condensation) polymers.

• Chain-growth polymers are prepared by chain reactions. Monomers are added to the growing end of a polymer chain. The conversion of vinyl chloride to poly(vinyl chloride) is an example.

Page 4: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

4

Polymers

Introduction

• Step-growth polymers are formed when monomers containing two functional groups come together and lose a small molecule such as H2O or HCl.

• In this method, any two reactive molecules can combine, so that monomer is not necessarily added to the end of a growing chain.

• Step-growth polymerization is used to prepare polyamides and polyesters.

Page 5: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

5

PolymersIntroduction • Polymers generally have high molecular weights ranging

from 10,000 to 1,000,000 g/mol.• Synthetic polymers are really mixtures of individual polymer

chains of varying lengths, so the reported molecular weight is an average value based on the average size of the polymer chain.

• By convention, the written structure of a polymer is simplified by placing brackets around the repeating unit that forms the chain.

Figure 30.2Drawing a polymer in a

shorthand representation

Page 6: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

6

Polymers

Chain-Growth (Addition) Polymers• Chain-growth polymerization is a chain reaction that

converts an organic starting material, usually an alkene, to a polymer via a reactive intermediate—a radical, cation or anion.

Page 7: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

7

Polymers

Chain-Growth Polymers—Radical Polymerization• The initiator is often a peroxy radical (RO•).

Page 8: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

8

Polymers

• Radical polymerization of CH2=CHZ is favored by Z substituents that stabilize a radical by electron delocalization.

• Each initiation step occurs to put the intermediate radical on the carbon bearing the Z substituent.

• With styrene as the starting material, the intermediate radical is benzylic and highly resonance stabilized.

Chain-Growth Polymers—Radical Polymerization

Page 9: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

9

Polymers

• Chain termination can occur by radical coupling, or by disproportionation, a process in which a hydrogen atom is transferred from one polymer radical to another, forming a new C—H bond on one polymer chain, and a double bond on the other.

Chain-Growth Polymers—Radical Polymerization

Page 10: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

10

Polymers

• Several monomers can be used in radical polymerizations

Chain-Growth Polymers—Radical Polymerization

Figure 30.3Monomers used in radical

polymerization reactions

Page 11: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

11

Polymers

• There are two common types of polyethylene—high-density polyethylene (HDPE) and low-density polyethylene (LDPE).

• HDPE consists of long chains of CH2 groups joined together in a linear fashion. It is strong and hard because the linear chains pack well, resulting in stronger van der Waals interactions. It is used in milk containers and water jugs.

• LDPE consists of long chains with many branches along the chain. The branching prohibits the chains from packing well, so LDPE has weaker intermolecular interactions, making it a much softer and pliable material. It is used in plastic bags and insulation.

Chain-Growth Polymers—Radical Polymerization

Chain Branching

Page 12: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

12

PolymersChain-Growth Polymers—Radical Polymerization

Chain Branching

Page 13: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

13

PolymersChain-Growth Polymers—Radical PolymerizationChain Branching• Branching occurs when a radical on one growing

polyethylene chain abstracts a hydrogen atom from a CH2 group in another polymer chain.

Page 14: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

14

Polymers

Chain-Growth Polymers—Ionic Polymerization• Chain-growth polymerization can also occur by way of

cationic or anionic intermediates.• Cationic polymerization is an example of electrophilic

addition to an alkene involving carbocations.• Cationic polymerization occurs with alkene monomers that

have substituents capable of stabilizing intermediate carbocations, such as alkyl groups or other electron-donor groups.

• The initiator is an electrophile such as a proton source or Lewis acid.

• Since cationic polymerization involves carbocations, addition follows Markovnikov’s rule to form the more stable carbocation. Chain termination occurs by a variety of pathways, such as loss of a proton to form an alkene.

Page 15: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

15

Polymers

Chain-Growth Polymers—Ionic Polymerization

Page 16: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

16

Polymers

Chain-Growth Polymers—Ionic Polymerization

• Alkenes readily react with electron-deficient radicals and electrophiles, but not (generally) with anions and other nucleophiles.

• Anionic polymerization takes place only with alkene monomers that contain electron-withdrawing groups such as COR, COOR or CN, which can stabilize an intermediate negative charge.

• The initiator in anionic polymerization is a strong nucleophile, such as an organolithium reagent, RLi.

Page 17: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

17

Polymers

Chain-Growth Polymers—Ionic Polymerization

Page 18: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

18

Polymers

Chain-Growth Polymers—Ionic Polymerization

• There are no efficient methods of terminating anionic polymerizations.

• The reaction continues until all the initiator and monomer have been consumed so that the end of the polymer chain contains a carbanion.

• Anionic polymerization is called living polymerization because polymerization will begin again if more monomer is added at this stage.

• To terminate anionic polymerization an electrophile such as H2O or CO2 must be added.

Page 19: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

19

Polymers

Chain-Growth Polymers—Ionic PolymerizationFigure 30.4 Common polymers formed by ionic chain-growth polymerization

Page 20: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

20

Polymers

Chain-Growth Polymers—Ionic PolymerizationFigure 30.4 continued

Page 21: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

21

Polymers

Chain-Growth Polymers—Ionic Polymerization

Copolymers

Copolymers are polymers prepared by joining two or more monomers (X and Y) together.

Page 22: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

22

PolymersChain-Growth Polymers—Ionic PolymerizationCopolymers

• The structure of a copolymer depends on the relative reactivity of X and Y, as well as the conditions used for polymerization.

• Several copolymers are commercially important: Saran food wrap is made from vinyl chloride and vinylidene chloride. Automobile tires are made from 1,3-butadiene and styrene.

Page 23: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

23

PolymersChain-Growth Polymers—Ionic PolymerizationAnionic Polymerization of Epoxides

• Anionic polymerization of epoxides can be used to form polyethers. For example, the ring opening of ethylene oxide with OH as initiator affords an alkoxide nucleophile which propagates the chain by reacting with more ethylene oxide.

• Polymerization of ethylene oxide forms poly(ethylene glycol), PEG, a polymer used in lotions and creams.

Page 24: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

24

PolymersChain-Growth Polymers—Ionic Polymerization

Anionic Polymerization of Epoxides

• Under anionic conditions, the ring opening follows an SN2

mechanism. Thus, the ring opening of an unsymmetrical epoxide occurs at the more accessible, less substituted carbon.

Page 25: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

25

PolymersZiegler-Natta Catalysts and Polymer Stereochemistry• Polymers prepared from monosubstituted alkene monomers

(CH2=CHZ) can exist in three different configurations: isotactic, syndiotactic, and atactic.

Page 26: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

26

PolymersZiegler-Natta Catalysts and Polymer Stereochemistry• The more regular arrangement of Z substituents makes

isotactic and syndiotactic polymers pack together better, making the polymer stronger and more rigid.

• Chains of atactic polymer tend to pack less closely together, resulting in a lower melting point and a softer polymer.

• Radical polymerizations often afford atactic polymers.• Reaction conditions can greatly affect the stereochemistry of

the polymer formed.• The use of Ziegler-Natta catalysts permits easy control of

polymer stereochemistry, with the formation of isotactic, syndiotactic or atactic polymers dependent on the catalyst used.

• Most Ziegler-Natta catalysts consist of an organoaluminum compounds such as (CH3CH2)2AlCl or TiCl4.

Page 27: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

27

Polymers

Ziegler-Natta Catalysts and Polymer Stereochemistry

Page 28: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

28

PolymersNatural and Synthetic Rubbers• Natural rubber is a terpene composed of repeating

isoprene units, in which all the double bonds have the Z configuration.

• Since natural rubber is a hydrocarbon, it is water insoluble, making it useful for water proofing.

• The Z double bonds cause bends and kinks in the polymer chain, making it a soft material.

Page 29: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

29

PolymersNatural and Synthetic Rubbers• The polymerization of isoprene under radical conditions

forms a stereoisomer of natural rubber called gutta-percha, in which all the double bonds have the E configuration.

• Gutta-percha is also naturally occurring, but is less common than its Z stereoisomer.

• Polymerization of isoprene with a Ziegler-Natta catalyst forms natural rubber with all the double bonds having the desired Z configuration.

Page 30: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

30

PolymersNatural and Synthetic Rubbers• Natural rubber is too soft to be used in most applications.• When natural rubber is stretched, the chains become

elongated and slide past each other until the material pulls apart.

• In 1939, Charles Goodyear discovered that mixing hot rubber with sulfur produced a stronger more elastic material. This process is called vulcanization.

• Vulcanization results in cross-linking of the hydrocarbon chains by disulfide bonds. When the polymer is stretched, the chains no longer can slide past each other, and tearing does not occur.

• Vulcanized rubber is an elastomer, a polymer that stretches when stressed but then returns to its original shape when the stress is alleviated.

Page 31: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

31

Polymers

Natural and Synthetic RubbersFigure 30.5

Vulcanized rubber

Page 32: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

32

PolymersNatural and Synthetic Rubbers• The degree of cross-linking affects the rubber’s properties.

Harder rubber used for automobile tires has more cross-linking than the softer rubber used for rubber bands.

• Other synthetic rubbers can be prepared by the polymerization of different 1,3-dienes using Ziegler-Natta catalysts. For example, polymerization of 1,3-butadiene affords (Z)-poly(1,3-butadiene), and polymerization of 2-chloro-1,3-butadiene yields neoprene, a polymer used in wet suits and tires.

Page 33: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

33

Polymers

Step-Growth Polymers—Condensation Polymers

• Step-growth polymers are formed when monomers containing two functional groups come together with loss of a small molecule such as H2O or HCl.

• Commercially important step-growth polymers include:

Polyamides

Polyesters

Polyurethanes

Polycarbonates

Epoxy resins

Page 34: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

34

Polymers

Step-Growth Polymers—Polyamides

• Nylons are polyamides formed from step-growth polymerization.

• Nylon 6,6 can be prepared by the reaction of a diacid chloride with a diamine, or by heating adipic acid and 1,6-diaminohexane. A BrØnsted-Lowry acid-base reaction forms a diammonium salt which loses H2O at high temperature.

Page 35: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

35

Polymers

Step-Growth Polymers—Polyamides

• Nylon 6 is another polyamide which is made by heating an aqueous solution of -caprolactam. The seven-membered ring of the lactam is ring opened to form 6-aminohexanoic acid, the monomer that reacts with more lactam to form the polyamide chain.

Page 36: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

36

Polymers

Step-Growth Polymers—Polyesters

• Polyesters are formed using nucleophilic acyl substitution reactions. For example, the reaction of terephthalic acid and ethylene glycol forms polyethylene terephthalate (PET), a polymer commonly used in plastic soda bottles. It is also sold as Dacron, a lightweight and durable material used in textile manufacturing.

Page 37: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

37

Polymers

Step-Growth Polymers—Polyesters• Although PET is a very stable material, some

polyesters are more readily hydrolyzed to carboxylic acids and alcohols in aqueous medium, making them useful in applications where show degradation is useful.

• Copolymerization of glycolic acid and lactic acid forms a copolymer used by surgeons in dissolving sutures.

Page 38: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

38

Polymers

Step-Growth Polymers—Polyurethanes• A urethane (also called a carbamate) is a compound

that contains a carbonyl group bonded to both an OR group and an NHR or NR2 group.

• Urethanes are prepared by the nucleophilic addition of an alcohol to the carboxyl group of an isocyanate, RN=C=O.

Page 39: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

39

Polymers

Step-Growth Polymers—Polyurethanes• Polyurethanes are formed by the reaction of a

diisocyanate and a diol.• A well-known polyurethane that illustrates how the

macroscopic properties of a polymer depend on its structure at the molecular level is Spandex.

• At the molecular level, it has rigid regions that are joined together by soft flexible segments.

• Spandex is routinely used in both men’s and women’s active wear .

Page 40: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

40

Polymers

Step-Growth Polymers—Polycarbonates• A polycarbonate is a compound that contains a carbonyl

group bonded to two OR groups. • Carbonates can be prepared by the reaction of phosgene

(Cl2C=O) with two equivalents of an alcohol (ROH).

• Polycarbonates are formed from phosgene and a diol. The most widely used polycarbonate is Lexan, used in bike helmets, goggles, and bulletproof glass.

Page 41: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

41

Polymers

Step-Growth Polymers—Epoxy Resins• Epoxy resins are the material of which “epoxy glue” is

comprised.• Epoxy resins consist of two components: a fluid

prepolymer composed of short polymer chains with reactive epoxides on each end, and a hardener, usually a diamine or triamine that ring opens the epoxides and cross-links the chains together.

• The prepolymer is formed by reacting two different functional monomers, bisphenol A and epichlorohydrin.

Page 42: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

42

Polymers

Step-Growth Polymers—Epoxy Resins• Nucleophilic attack by the phenolic OH groups on the

strained epoxide ring affords an alkoxide that displaces Cl by an intramolecular SN2 reaction, forming a new

epoxide. Ring opening with a second nucleophile gives a 2° alcohol.

• When bisphenol A is treated with excess epichlorohydrin, this step-wise process continues until all the phenolic OH groups have been used in ring-opening reactions, leaving epoxy groups on both ends of the polymer chains. This constitutes the fluid copolymer.

Page 43: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

43

PolymersStep-Growth Polymers—Epoxy Resins• When the prepolymer is mixed with a di- or triamine (the hardener),

the reactive epoxides can be ring opened by the nucleophilic amino groups to cross-link polymer chains together, causing the polymer to harden.

Figure 30.6Formation of an epoxy resin

from a prepolymer and ahardening agent

Page 44: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

44

Polymers

Polymer Structure and Properties• The large size of polymer molecules gives them some

unique physical properties compared with small organic molecules.

• Linear and branched polymers do not form crystalline solids because their long chains prevent efficient packing in a crystal lattice. Most polymers have crystalline regions and amorphous regions.

Page 45: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

45

Polymers

Polymer Structure and Properties• Crystallites: these are ordered crystalline regions of the

polymer that lie in close proximity and are held together by intermolecular interactions, such as van der Waals forces or hydrogen bonding.

Crystalline regions impart toughness to a polymer.

The greater the crystallinity (i.e., the larger the percentage of ordered regions), the harder the polymer.

• Amorphous regions: These are segments of the polymer structure where the polymer chains are randomly arranged, resulting in weaker intermolecular interactions.

Amorphous regions impart flexibility.

Branched polymers are generally more amorphous, and since branching prevents chains from packing closely, they are also softer.

Page 46: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

46

Polymers

Polymer Structure and Properties

• Two temperatures, Tg and Tm, often characterize a polymer’s behavior.

• Glass transition temperature (Tg): temperature at which a hard amorphous polymer becomes soft.

• Melt transition temperature (Tm): temperature at which crystalline regions of the polymer melt to become amorphous. More ordered polymers have higher Tm values.

Page 47: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

47

Polymers

Polymer Structure and Properties

• Thermoplastics are polymers that can be melted and then molded into shapes that are retained when the polymer is cooled.

• They have high Tg values and are hard at room temperature, but heating causes individual polymer chains to slip past each other, causing the material to soften.

• Thermosetting polymers are complex networks of cross-linked polymers.

• They are formed by chemical reactions that occur when monomers are heated together to form a network of covalent

bonds. • They cannot be re-melted to form a liquid phase because

covalent bonds hold the network together. An example is Bakelite, formed from phenol and formaldehyde.

Page 48: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

48

Polymers

Polymer Structure and PropertiesFigure 30.7

The synthesis of Bakelite fromphenol and formaldehyde

Page 49: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

49

Polymers

Polymer Structure and Properties—Plasticizers • If a polymer is too stiff and brittle to be used in practical

applications, low molecular weight compounds called plasticizers can be added to soften the polymer and give it flexibility.

• The plasticizer interacts with the polymer chains, replacing some of the intermolecular interactions between the polymer chains.

• This lowers the crystallinity, making it more amorphous and softer.

• Dibutyl phthalate is a plasticizer added to poly(vinyl chloride) used in vinyl upholstery and garden hoses.

• Since plasticizers are more volatile than the high molecular weight polymers, they slowly evaporate making the polymer brittle and easily cracked.

Page 50: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

50

Polymers

Polymer Structure and Properties—Plasticizers

• Plasticizers like dibutyl phthalate that contain hydrolyzable functional groups are also slowly degraded by chemical reactions.

Page 51: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

51

Polymers

Environmental Impact of Polymers

• Polymer synthesis and disposal have a tremendous impact on the environment, and have created two central issues:

• Where do polymers come from? What raw materials are used for polymer synthesis and what environmental consequences result from their manufacture?

• What happens to polymers once they are used? How does polymer disposal affect the environment, and what can be done to minimize its negative impact.

Page 52: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

52

Polymers

Where do Polymers Come From? • Until recently, the feedstock for all polymer synthesis

has been petroleum.• The monomers of virtually all polymer syntheses are

made from crude oil, a nonrenewable raw material. For example, nylon 6,6 is prepared industrially from adipic acid and 1,6-diaminohexane, both of which originate from benzene, a product of petroleum refining.

The Problems with Polymer Synthesis

Figure 30.8Synthesis of adipic acid and

1,6-diaminohexane fornylon 6,6 synthesis

Page 53: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

53

Polymers

Where do Polymers Come From?

• The adipic acid synthesis of nylon 6,6 has other problems.

• The use of benzene (a carcinogen and liver toxin) is undesirable, particularly in the large quantities demanded by large scale industrial reactions.

• The required oxidation with HNO3 in step 3 produces N2O as a by-product. N2O depletes ozone in the stratosphere. It also absorbs thermal energy from the earth surface like CO2, and may thus contribute to global warming.

The Problems with Polymer Synthesis

Page 54: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

54

Polymers

• The negative environmental impact of polymer synthesis has prompted the development of Green Polymer Syntheses—the use of more environmentally benign methods to synthesize polymers.

• To date, green polymer synthesis has been approached in a variety of ways:

• Using starting materials that are derived from renewable sources, rather than petroleum.

• Using safer less toxic reagents that form fewer by-products.

• Carrying out reactions in the absence of solvent or in aqueous solution (instead of an organic solvent).

Green Polymer Synthesis

Page 55: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

55

Polymers

• Chemists at Michigan State University have devised a two-step synthesis of adipic acid from glucose.

• The synthesis uses a genetically altered E. coli strain (called a biocatalyst) to convert D-glucose to (2Z,4Z)-2,4-hexadienoic acid, which is then hydrogenated to adipic acid.

Green Polymer Synthesis—Some Examples

Page 56: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

56

Polymers

• Sorona, DuPont’s trade name for polypropylene terephthalate, can now be made at least in part from glucose derived from a plant source such as corn.

• A biocatalyst converts D-glucose to 1,3-propanediol, which forms polypropylene terephthalate on reaction with terephthalic acid.

Green Polymer Synthesis—Some Examples

Figure 30.9 A swimsuit made (in part) from corn—The synthesis ofpolypropylene terephthalate from 1,3-propanediol derived from corn

Page 57: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

57

Polymers

• Other approaches have concentrated on using less hazardous reagents and avoiding solvents.

• Lexan can now be prepared by using bisphenol A with diphenyl carbonate in the absence of solvent. This avoids the use of phosgene, an acutely toxic reagent.

Green Polymer Synthesis—Some Examples

Page 58: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

58

Polymers

• The same desirable characteristics that make polymers popular materials for consumer products—durability, strength, and lack of reactivity—also contribute to environmental problems.

• Because polymers do not degrade readily, billions of pounds of them end up in landfills every year.

• Two solutions to address the waste problem are:1. Recycling existing polymer types to make new materials

2. Using biodegradable polymers that will decompose in a finite and limited time span.

The Problems with Polymer Disposal

Page 59: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

59

Polymers

• Currently, ~23% of all plastics are recycled in the United States.

• Although thousands of different synthetic polymers have now been prepared, six compounds called the “Big Six,” account for 76% of the synthetic polymers produced in the U.S. each year.

• Each polymer is assigned a recycling code (1-6) that indicates its ease of recycling; the lower the number, the easier it is to recycle.

• Recycling begins with sorting plastics by type, shredding the plastics into small chips, and washing the chips to remove adhesives and labels. After the chips are dried and any metal caps or rings are removed, the polymer chips are melted and molded for reuse.

Polymer Recycling

Page 60: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

60

Polymers

Polymer Recycling

Page 61: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

61

Polymers

Chemical Polymer Recycling

• An alternative recycling process is to re-convert polymers back to the monomers from which they were made, a process that has been successful with acyl compounds that contain C—O or C—N bonds in the polymer backbone. For example, heating PET with CH3OH cleaves the esters of the polymer chain to give ethylene glycol and dimethyl terephthalate. These monomers can serve as starting materials for more PET.

• Similar treatment of discarded nylon 6 polymer with NH3 cleaves the polyamide backbone, forming -caprolactam, which can be purified and re-converted to nylon 6.

Page 62: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

62

Polymers

Examples of Chemical Polymer Recycling

Page 63: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

63

Polymers

• Another solution to the accumulation of waste polymers in landfills is to design biodegradable polymers.

• A biodegradable polymer is a polymer that can be degraded by microorganisms—bacteria, fungi, or algae—naturally present in the environment.

• Several biodegradable polyesters have now been developed [e.g., polyhydroxyalkanoates (PHAs), which are polymers of 3-hydroxybutyric acid or 3-hydroxyvaleric acid].

Biodegradable Polymers

Page 64: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

64

Polymers

• The two most common PHAs are polyhydroxybutyrate (PHB) and a copolymer of polyhydroxybutyrate and polyhydroxyvalerate (PHBV).

Biodegradable Polymers

• PHAs can be used as films, fibers, and coatings for hot beverage cups made of paper.

• Bacteria in the soil readily degrade PHAs, and in the presence of oxygen, the final degradation products are CO2 and H2O.

Page 65: 1 Polymers Introduction Polymers are large organic molecules comprised of repeating units called monomers that are covalently bonded together. Polymers.

65

• An additional advantage of the PHAs is the polymers can be produced by fermentation. Certain bacteria produce PHAs for energy storage when they are grown in glucose solution in the absence of certain nutrients. The polymer forms as discrete granules within the bacterial cell. These are removed by extraction to give a white powder that can be melted and modified into a variety of different products.

• Biodegradable polyamides have also been prepared from amino acids (e.g., aspartic acid can be converted to polyaspartate, abbreviated TPA). It is a commonly used alternative to poly(acrylic acid), which is used to line pumps and boilers of wastewater treatment facilities.

PolymersBiodegradable Polymers