1

MARKET LAUNCH CONCEPTLithium Ion Battery – POWER X-CHANGE

22

Market data - Development Lithium-Ion in comparison with NiCd

2009 2013

%

40%

83%

60%

17%

Use of Lithium-Ion batteries and Nickel-Cadmium batteries in Europe (in %) between 2009 and 2013.

Lithium-Ion batteries

Nickel-Cadmium batteries

33

BATTERY-DETAILS

•Large grip and unlocking zone

•Integrated intelligent ABS system

•Rubberised anti-slip surface

•Strengthened corners

•Reliable sliding connection

•Battery capacity display

50 % less charging time

Maximum performance

Maximum battery life

Maximum safety

The innovative 18V and 36V lithium-Ion-battery

system for tools and garden

44

BATTERY TECHNOLOGY – The Einhell-ABS

•Microprocessor-controlled for effective protection against overload and overheating

•The intelligent charging method allows charging regardless of its state of charge with maximum durability

•The smart charging controller controls each battery cell individually and guarantees a full charge of each cell

•The 3-stage LED display shows not only the charging status of the battery, but also extreme temperature conditions

•Lithium-Ion technology against self-discharge

•Only high-quality brand batteries are used for the Power X-Change system

•Three-shell structure, rubberised on all sides, for optimum protection against damage

55

BATTERY-OPTIONS

1.5 Ah

3.0 Ah

5.2 Ah

Always the required endurance

capacity

durationstandarddoublequad

Batteries in comparison EINHELL

66

Name of the item Power X-Change

Capacity 1,5 Ah / 3,0 Ah / 5,2 Ah

Voltage 18 V, combineable to 36 V

Stored Energy18 V: 27Wh / 54Wh / 94Wh

36 V: 54Eh / 108Wh / 188 Wh

Safety technology In battery + charger

Discharging protection

4 levels:Temperature (2 times)

Cell voltageAmperage

Deep discharging protection* For every cell

Status indication Yes (4-stage)

*If a Li-Ion Battery is deep discharged, the battery is damaged and can not work anymore. The Einhell battery is protected against this case directly in the pack.

CONCLUSION: The Power X-Change system is much more versatile and has a more intelligent battery management system

77

Power X-Charger

Power output* 3A

Charging time1,5Ah: 30 min3,0Ah: 60 min

5,2Ah: 130 min

Temperature adapted charging Yes

Charging indication2 LEDs

6-step charging indication

•Sloped battery slot, suitable for wall mounting

•Power X-Charger for all the batteries of the Power X-Change-System

•Compact and robust construction

•6-step battery level indicator

EINHELL

*The power output and the capacity of the battery defines the charging time. A higher output charges batteries faster.

•Fast charger

88

Intelligent charging

The charger automatically detects the temperature of the lithium-ion battery.At not optimal temperature of the battery, the charger informs the user visual through a LED-Display and charges at optimum conditions for increased lifetime time.

Temperature adapted charging

Cell balancing during charging

All cells are balanced during charging to have always the same filling level in each cell. When all cells are full charging stops – for maximum energy storage!

CONCLUSION: Prolonged lifetime and maximum energy loading!

9

MARKET LAUNCH CONCEPTTE-CD 18 Li Cordless Drill

10

Features

•Automatic Spindle Lock

•Quick Stop

•Sturdy Metal Gear

•High-Torque Engine

•Ergonomic Handle Shape With Softgrip

11

Market Review

Brand Einhell

Model TE-CD 18 Li

   

 

Technical DatesVoltage 18 VCapacity 1,5 AhCharger 30 minIdle Speed 0-320 / 0-1.350 min-1Torque Settings 23+1max. Torque 48 NmWeight Incl. Battery 1,5 kgFeatures

Hook

12

Dates

Technical Dates Number of screws ø6x60 mm

1,5 Ah130 pcs.

3,0 Ah 260 pcs.

5,2 Ah490 pcs.

Voltage 18VTorque 48NmWeight 1,5kg (with 1,5 Ah battery)Idle Speed 1.Gear: 0 - 320 min-1

2.Gear: 0 - 1.350 min-1Art.Nr1,5 Ah 45.136.90

2 x 1,5 Ah45.136.87

Solo45.136.92

13

Fast tool change through automatic spindle lock and Quick Stop.

Sturdy metal gear with long living components

All components offer quality for high demands and the sturdy 2-speed metal gear is made for tough jobs. That guarantees a long life.

Quick and easy change of different tools thank´s to the automatic spindle lock of the single-sleeve chuck. The practical quick-stop function prevents the undesired after running after each drilling or screwing progress.

14

Flexible gear setting and fast setting control.Perfected with a high torque engine

LED-Light

The well visible control displays of the cordless drill always giving feedback about the desired transmission setting and the rotating direction of the chuck.The first gear provides high torque for powerful screwing jobs.The second gear enables fast drilling progress.

With it´s position, the bright LED-light illuminates the whole working area so the user always have the perfect view for all drilling and screwing tasks.

15

For safe and comfortable working: Belt clip, softgrip and ergonomic design

Slim and ergonomic design with softgrip and perfect balanced in combination with the lithium-ion battery

Always ready to hand through practical belt clip

16

IllustrationStandard Accessory

Packaging Art.Nr.

w/o battery and charger

carton 45.136.92

1x1,5Ah battery1xcharger (30min)

45.136.90

2x1,5Ah batterys1xcharger (30min)

45.136.87

VERSIONS

17

MARKET LAUNCH CONCEPTTE-CD 18-2 Li-i Cordless Impact Drill

18

Features

•3 Functions: Screwing, Drilling, Impact Drilling

•Automatic Spindle Lock

•Quick Stop

•Sturdy Metal Gear

•High Torque Engine

19

Market Review

Brand Einhell

Model TE-CD 18-2 Li-i

Technical Dates

Voltage 18 V

Capacity 1,5 Ah

Charger 30 min

Idle Speed 0-320 / 0-1.350 min-1

Torque Settings 23+1+1

max. Torque 48 Nm

Weight Incl. Battery 1,76 kg

Features

13mm Chuck, Additional Handle, Hook

20

Dates

Technical Dates Number of screws ø6x60 mm

1,5 Ah140 pcs.

3,0 Ah 280 pcs.

5,2 Ah520 pcs.

Voltage 18VTorque 48NmWeight 1,8kg (with 1,5 battery)Idle Speed 1.Gear: 0 - 320 min-1

2.Gear: 0 - 1.350 min-1Versions 1 x 1,5 Ah45.138.02

Solo45.138.00

21

Screwing, Drilling and Impact Drilling2 gears for drilling and screwing

The first gear provides high torque for powerful screwing jobs.The second gear enables fast drilling progress.

Cordless screwing and drilling are standard functions at cordless drills. This cordless impact drill has a hammer function in addition, which can be switched off/on to drill in mansonry without any problem.

22

Sturdy gear head and metal gear Torque Slip Coupling

The torque slip coupling prevents overtightening of screws and too deep screwing into the material at each screwing progress.

All components offer quality for high demands. The sturdy, but also lightweight aluminium gear head and the high-quality 2-speed metal gear are made for tough jobs. This guarantees a long life.

2323

Hook and LED-Light Easy and quick tool change

The stable belt clip enables fast and comfortable attaching of the cordless drill at the users belt and is therefore always ready to hand. Through the special placed and very bright LED-light, the working area is always perfect illuminated.

Quick and easy change of different tools thank´s to the automatic spindle lock of the 13 mm single sleeve chuck. The practical quick stop function prevents the undesired after running after each drilling or srewing progress.

24

IllustrationStandard Accessory

Packaging Art.Nr.

w/o battery and charger

carton 45.138.02

1x1,5Ah battery1xcharger(30min)

45.138.00

VERSIONS

25

MARKET LAUNCH CONCEPTTE-CI 18 Li Cordless Impact Driver

26

Features

Fastest Screwdriver Of It́ s Category Screws Up To M12 Impact Driver, No Restoring Forces

Short And Lightweight Construction Unique Triathlonmotor

27

MarktübersichtMarket Review

Brand Einhell

Model TE-CI 18 Li

 Technical Dates  Voltage 18 VCapacity 1,5 AhIdle Speed 0 - 2.700 min-1Impact Rate 0 - 3.200 min-1Torque 140 NmWeight Incl. Battery 1,45 kgFeatures  Softgrip PLED-Light PMetal Gear Housing PBelt Clip PStandard Accessories  Battery OCharger O

28

Dates

Technical Dates

Voltage 18VIdle Speed 0 – 2700min-1Impact Rate 0 – 3200min-1Torque 140NmWeight ca. 1,45 kg (with 1,5 Ah batt.)Versions 1,5 Ah

45.100.20Solo45.100.23

Number of screws with a 6x160 mm screw

•1,5 Ah140 pcs.

•3,0 Ah 280 pcs.

•5,2 Ah520 pcs.

Screwing In Soft Wood

Einhell TE-CI 18 Li Competitor A Competitor B

9

8

7

6

5

4

3

2

1

0

Seconds

5:88 6:45 8:85

29

Triathlon Motor – high-quality engine for best screwing results

Much more torque through 4-pole-engine (2 magnets) instead of 2-pole-engine at same size – therefore small, handy and powerful

Because of better power transmission there is just a little speed decrease under load. That means more draft power and faster working progress.

The Triathlon Motor is more efficient than standard engines and that´s why he has lower energy consumption and less wearout. That ensures longer battery running time and therefore more screws per charged battery.

SPEEDPOWER ENDURANCE

30

The cordless impact driver TE-CI 18 Li is a high-quality and powerful tool for highest demands at screwing jobs where high performance is needed. No spinning strengths at the users wrist through a special impact mechanism. Even big and large screws can be screwed easily and efficient. Thank´s to the Triathlon Motor, the TE-CI 18 Li is the fastest cordless impact driver of it´s category.

Easy Screwing – without restoring forces

31

The practical belt clip ensures efficient and safe working. The impact driver is always ready to hand if he is needed.

Belt Clip

The impact driver fits perfect in the users hand thank´s to the short and lightweight construction with ergnonomic designed softgrip areas

Short, Ergonomic Construction

32

Three circular adjusted power LEDs ensure a pefect view on the working area at any time.

3 LEDs

A bit locking is important to carry out series screwing jobs efficiently. Especially at impact drivers.

Bit Locking

33

The impact driver is equipped with a sturdy and long living alu-housing. The housing also ensures a perfect heat removal.

Sturdy Alu-Housing

The sturdy plastic housing is protected with additional rubber supports at the contact surfaces.

Non-Slip Rubber-Bumper

34

IllustrationStandard Accessory

Packaging Art.Nr.

w/o battery and charger

carton 45.100.23

1x1,5 Ah battery1xcharger (30 Min)

45.100.20

VERSIONS

35

MARKET LAUNCH CONCEPTTE-CL 18 Li Cordless LED-Lamp

36

Features

•3 energy-saving LEDs

•Very Bright Light

•Adjustable Light Beam

•Flexible Through Angle Adjustment

•Light Period Up To 32 Hours

Brand Einhell

Model TE-CL 18 Li

 Technical Dates  Voltage 18 VLight Period 1,5 / 3,0 / 5,2 Ah: 8 / 16 / 32 hLuminous Flux 270 lm Weight 0,27 kgFeatures  Swivel-Mounted Head PAdjustable Light Cone PSoftgrip PHead Fixation OStandard Accessories  Battery OCharger O

37

Market Review

38

Dates

Technical Dates Light Period

1,5 Ah8h

3,0 Ah 16h

5,2 Ah32h

Voltage 18VLamps 3 LEDsLuminous Flux 270 LumesSwivel Range 0 – 135 °Article Number 45.141.10

Standard Accessory Packaging Art.Nr.

w/o battery and charger carton 45.141.10

39

Swivel-mounted head and extreme bright light Light period up to 32 hours

The combination of the powerful lithium-ion battery from the Power X-Change family and the 3 energy saving power LEDs allowing a long light period up to 32 hours.

The extra bright light can illuminate every desired place because of the 135° swivel-mountedhead of the LED lamp. An adjustable light cone allows the user to switch between concentrated light or wide illumination.

40

MARKET LAUNCH CONCEPTTE-AG 18 Li Cordless Angle Grinder

4141

Features

•Lightest Of It́ s Category

•Ergonomic Softgrip Handle

•Overload Protection For Durability

•Safety Through Start-Up Protection

•Safety Through Softstart

•Handy And Agile

4242

Dates

Technical Dates Number of cutted round steel (Ø 12mm)

1,5 Ah15 pcs.

3,0 Ah 30 pcs.

5,2 Ah60 pcs.

Voltage 18VDisc Diameter 115mmIdle Speed 8500 min-1Cutting Depth max. 28mmWeight 2,4 kg (with 1,5 Ah battery)Article Number 44.311.10 Standard Accessory Packaging Art.Nr.

w/o battery and charger carton 44.311.10

4343

Market Review

Brand Einhell

 Model TE-AG 18 Li

Technical DatesVoltage 18 VDisc Diameter 115 min-1Idle Speed 8.500 min-1Weight with battery 2,4 kg

Features

Softgrip ü3 Positions Additional Handle üStart-Up Protection üSoftstart ü4-Pole-Engine ûOverload Protection ü

4444

AIR in

AIR in

AIR out

AIR out

Special engineered Cooling System for longer running time

The completely changed airflow inside of the tool provides a considerably longer running time of the angle grinder. Air will be sucked in at the rear of the tool an guided specifically over the motor – for a optimal cooling and durability of the motor.

4545

Decoupling between engine and gear Extensive safety-equipment

A so called hardy-disc decouples the engine and the gear from each other. This ensures a considerably smoother and less vibrating running of the angle grinder. Pleasant working is guaranteed.

An extensive safety-package was integrated into the Einhell angle grinder. So the softstart ensures a comfortable and safe starting of the tool. A start-up protection prevents an accidental start of the tool after changing the battery. For the safety of the tool and his user, the angle grinder stops automatically if he´s going to be overloaded, for example if the disc gets stucked.

4646

Top Housing Connection between the housing parts Little housing scope and ergnonomic construction with softgrip

The conncection between the several housing parts is especially high-quality made and creates therefore a stable unit – engineered for durability.

The housing scope is designed very compact (only 200 mm) in order to reach difficult to access spaces without any problem.Thank´s to it´s ergonomic softgrip area, the angle grinder remains comfortable and safe in the users hand.

47

MARKET LAUNCH CONCEPTTE-OS 18 Li Cordless Multi Sander

48

Features

•Ergonomic Handle Design

•Compact And Handy

•Unlimited Handling (Cordless Operation)

•Easy Sanding Paper Attachement Through „Extreme fix“

•Active Dust Extraction With Filter Box

49

Market Review

Brand Einhell

ModelTE-OS 18 Li

 

Technical DatesVoltage 18 VOscillations 24000 min-1Oscillation Circle 1,6 mmSanding Area 104 cm²FeaturesActive Dust Extraction P

Dust Extraction Adapter P

Two-Part Sanding Plate OWeight Incl. Battery 1,3 kg

50

Dates

Technical Dates Sanding period at wood

Voltage 18 VIdle Speed 22000min-1Oscillating Circuit 1,6mmAccessory 6 sanding papers (3*P120 + 3*P240)

Weight 1,3kg (with 1,5 Ah battery)

Sanding Paper Size 104 cm2(standard sanding paper)

Article Number 44.607.10

1,5 Ah23 min

3,0 Ah 40 min

5,2 Ah70 minStandard Accessory Packaging Art.Nr.

w/o battery and charger carton 44.607.10

51

Perfect ergonomics through special handle design and softgrip

The handle area at the top was recreated like the inner surface of the hand for perfect ergonomics. Perfect sanding results can be reached because of the additional softgrip. The softgrip also ensures precise guiding and lies perfect in the hand at any time.

Extreme-Fix – For quick and safe paper fixation

The Extreme-Fix system ensures a very good and crease-free grip of the sanding papers in combination with a easy removeability. Sanding papers can be changed fast and easy if needed. Strong fixation means less slip between the tool and the paper. Therefore Extreme-Fix enables a high sanding rate.

52

Active dust extraction and filterbox for more cleanliness at the working area

Coming up sanding dust will be sucked in while working with the multi sander and then transported into the dust box with filter through the active dust extraction. Cleanliness at the working area is guaranteed.

Anti-Vibration for a smoother run

The wear-resistant aluminium fanwheel ensures on the one hand the removal of sanding dust but is also a mass compensation for a smooth run of the tool.

53

MARKET LAUNCH CONCEPTTE-JS 18 Li Cordless Jig Saw

54

Features

•Smooth Running

•Engageable Pendulum Stroke For Fast Sawing Progress

•Toolless Universal Saw Blade Mount

•Perfect Sight: Dust Blowing Function, LED-Light,

Cutting Line Guidance

•Surface Saving System: With Splinter Guard And Plastic

Core Cover

55

Dates

Technical Dates Cutting length at chipboard thickness 19mm

Voltage 18VIdle Speed 0 – 2400min-1Stroke Height 25,4mmCutting Depth Wood 80mmWeight 2,0kg (with 1,5 Ah battery)Article Number 43.212.00

1,5 Ah5,2 m

3,0 Ah 10 m

5,2 Ah20 mStandard Accessory Packaging Art.Nr.

w/o battery and charger carton 43.212.00

Brand Einhell

Model TE-JS 18 Li

Technical Dates  Voltage 18 VIdle Speed 0 - 2.400 min-1Stroke Height 25,4 mmCutting Depth Wood 80 mmWeight 1,75kg Features  Electronic PPendulum Stroke PDust Extraction PDust Blowing Function PLED PLaser OSoftgrip PToolless Saw Blade Mount PStandard Accessories  Battery OCharger O

56

Market Review

57

Automatic dust blowing function for a clean view on the sawing area

Toolless universal saw blade mount

T- Shaft

U - Shaft

COMPATIBLE

The useful dust blowing function prevents the collection of sawdust reliably to have always a free view at the cutting area.

Easy and quick change of the saw blade. Saw blades with T-shaft and also U-shaft can be used with this tool because of the special universal mount.

58

Cutting line guide for precise and straight cuts

The cutting line guide at the saw plate for precise and straight cuts can be attached without any tools.Therefore the sawing process gets better visualized and it´s easier to stay in lane.

Brightly illuminated through LED-light

The bright LED-light at the front of the housing allows a well illuminated sawing area at any time and a perfect view at the sawing area.Perfect view – perfect cut!

59

Plastic core cover – gentle to the workpiece Splinter guard for clean cutting edges

The sturdy and high-quality aluminium saw plate is equipped with a plastic core cover to proctect sensitive surfaces from scratches.

The splinter guard prevents considerably the splitting of the workpiece at the surface. A perfect cut can be created with the combination of a suitable saw blade and without pendulum stroke.

60

MARKET LAUNCH CONCEPTTE-AP 18 Li Cordless All-purpose saw - sawMAXX

61

Features

•Smallest Of It́ s Category

•Lightweight And Handy

•Toolless Saw Blade Change

•Toolless Adjustable Soleplate

•Versatile Usage:

Building Site – Workshop – Garden

•Unique Triathlonmotor

62

Dates

Number of cutted round timber (Diameter: 35 mm)

1,5 Ah140

3,0 Ah 290

5,2 Ah570

Voltage 18VStroke Height 22 mmCutting Depth Wood 100 mmIdle Speed 0 – 3300 min -1Weight 2,0 kg (with 1,5 Ah battery)Article Number 43.263.00

Technical Dates

Standard Accessory Packaging Art.Nr.

w/o battery and charger carton 43.263.00

63

Market Review

Brand Einhell

Model TE-AP 18 Li

Technical Dates  

Voltage 18 VIdle Speed 0 - 2600 min-1Stroke Height 22 mmCutting Depth Wood 100 mmWeight 1,6 kgFeatures  Toolless Saw Blade Change PToolless Adjustable Soleplate PSoftgrip PStandard Accessories  Battery OCharger OSaw Blade P

64

Triatlhon Motor – high-quality engine for best results

Much more torque through 4-pole-engine (2 magnets) instead of 2-pole-engine at same size – therefore small, handy but also powerful.

Because of a better power transmission there is just a little speed decrease under load. That means more draft power and faster working progress.

The Triathlon Motor is more efficient than standard engines and that´s why he has a lower energy consumption and less wearout. That ensures a longer battery running time and therefore more cuts per charged battery.

SPEEDPOWER ENDURANCE

65

Perfect Handling: Big softgrip-areas to dampen vibrations Shortest construction of it´s category– only 200 mm

The very ergonomic designed tool lies comfortable and balanced in the hand and can also be used for overhead cuts.Gripping surfaces with big softgrip areas damping of arising vibrations reliably.

With only 200 mm length, this cordless all-purpose saw is one of the shortest of it´s category and the low weight of only 2 kg ensures easy handling for a quick operation and versatile fields of application.

66

Universally applicableToolless Adjustable Soleplate– optimal saw blade usage and cutting depth limitation

The soleplate of the all-purpose saw is easy and toolless adjustable for perfect usage of the saw blade length and limitation of the cutting depth.

The cordless all-purpose saw is an essential and flexibly support at sawing bars, firewood, pipes or at gardening taskes. The powerful tool cuts wood up to a thickness of 100 mm.

67

Toolless Saw Blade Change – fast and safe Rubber Bumper – protects the housing against damages

Thank´s to the innovative tool mounting, the saw blade can be changed without any tool - fast and safe.

The big rubber bumpers at the housing protecting reliably against damages and guarentee therefore a long life.