1 Lighting 101 and Beyond A Short Course on Commercial & Industrial Lighting Name of Trainer Company...
-
Upload
james-glen -
Category
Documents
-
view
221 -
download
1
Transcript of 1 Lighting 101 and Beyond A Short Course on Commercial & Industrial Lighting Name of Trainer Company...
1
Lighting 101 and Beyond
A Short Course on Commercial & Industrial
Lighting
Name of TrainerCompany Name
Date of Presentation
2
Course Objectives
Provide information about energy efficient lighting technologies and how BPA promotes them
• Program information that encourages customers to install these technologies
• Technical information about lighting and control technology eligible for incentives
3
Benefits of Energy Efficient Lighting Improvements
• For the Customer: Lower energy bills
Reduced cooling requirements
Less frequent bulb replacements (resulting in O&M cost savings)
Improved work environment (leading to increased employee productivity and morale)
Positive reactions from those visiting facilities where technologies are installed
• For the Utility: Reduced energy use and related energy supply needs
Reduced environmental impact due to energy use
4
Course Overview
• Lighting technologies discussion
• Program information
Incentives available
Requirements
Customer eligibility
Equipment eligibility
Funding availability
Steps customers take to participate
5
Lighting Technologies
Discussion
6
Lighting Technology Categories
• Incandescent – burns a thin tungsten filament
• Fluorescent – mercury ions excite phosphors T12, T8, T5, CFLs, (1/8th inch)
• High intensity discharge – arc welding Mercury Vapor – old HID technology
High Pressure Sodium – poor HID technology
Metal Halide – best HID product
• Light emitting diode (LED) – silicon chip
• Induction lamp – radio frequency (RF)
7
Some Basic Lighting
Terminology
8
Correlated Color Temperature (CCT)
• Measures the "warmth" or "coolness" of a light source’s appearance in degrees Kelvin (K) against reference light sources
• Incandescent color temperatures are about 2,700o K
• Daylight lamp color temperatures are 5,000o K +
• Indirectly relates to energy savings
• Higher color temperature lamps appear brighter
• A subjective index depending on personal preference
9
Color Rendering Index (CRI)
• A measure of a light source's ability to render the color of objects "correctly," as compared to a reference light source of comparable color temperature
• The scale is between 0 and 100
• Generally, the higher the number, the better
• Color swatches used to determine CRI are red, green, and blue
• A subjective index: depends on personal preference
10
Other Important Lighting Definitions
• Lamp – generic term for a light source
• Ballast – electronic device that drives the lamp(s)
• Lumen – total amount of light produced
• Foot-candle – one lumen/square foot
• Light Level – synonymous with foot-candle
• Efficacy (lighting efficiency) - lumens/watt
• HO – high output fluorescent lamp
• VHO – very high output fluorescent lamp
• HP – High Performance T8 lighting system
11
Color Rendering of Various
Lighting Technologies
12
Human Perception
• Higher CRI lamps improve visual perception
For instance, 50 foot-candles of fluorescent light (CRI 86) will seem much brighter and better than 50 foot-candles of an HPS source (CRI 21)
Using this theory, it is possible to lower ambient light levels and save energy
• Higher CCT lamps appear brighter
• Higher CCT lamps improve reading
13
What is Meant by the “Visible Spectrum?”
The title gives this away
• The visible spectrum of light includes all of the wavelengths of light that our eyes are capable of seeing
• The human eye can see light only between about 380 and 780 nanometers wavelength
• Infrared goggles allow our eyes to see into the infrared region of light (above 780 nanometers)
14
The Primary Colors of Light
A combination of all three primary colors of light (red, green and blue) appears white. Combinations of two primaries produce the “secondary” colors – magenta, cyan and yellow. The three primary colors can be mixed to create almost any other color light.
Source: Osram Sylvania
15Source: Osram Sylvania
16Source: Osram Sylvania
17Source: Osram Sylvania
18Source: Osram Sylvania
19Source: Osram Sylvania
20Source: Osram Sylvania
21Source: Osram Sylvania
22Source: Osram Sylvania
23
Information on Energy
Efficient Lighting/Control
Technologies
24
Compact Fluorescent Lamps (CFLs)
Source: www.luxlite.com
25
Retrofit Incandescent Lamps withENERGY STAR-rated CFLs
• Benefits:
Lasts up to 10 times longer than incandescents reducing maintenance costs
Up to 75 percent energy savings
Less heat means reduced air conditioning load
26
Types of CFLs
• Spiral or Twist
• Capsule – A-lamp, bullet, globe, torpedo
• Bi-ax – twin-tube, tri-tube, U-tube
• Reflector – not ready for prime time yet
27
Linear Fluorescent Lamps
and Ballasts - T8s and
T5HOs
28
Types of Fluorescent Lamps
• Normal light Output (NLO)
• High light output (HO)
• Very high light output (VHO):
An inefficient lamp targeted by Energy Efficiency for change-outs!
• Energy saver – reduced light output
Source: Philips
29
Fluorescent Lamp Nomenclature
F32T8 / ADV841 / ALTO
• F stands for fluorescent
• 32 indicates a nominal 32-watt tube
• T indicates a tube shaped lamp
• 8 indicates a lamp 8/8th inch diameter
• ADV indicates High Performance lamp
• 8 indicates CRI
• 41 indicates a CCT of 4,100 Kelvin
• ALTO is Philips’ designation for low mercury
30
Retrofit Older T12 Ceiling Lights with T8 Fluorescent Lamps
• Benefits:
Lighting efficiency can range up to 80 lumens per watt (T12s range only to 56 lumens)
Produces more light than 34-watt T12, while using less energy
Provides better color rendering
Standard for new construction
31
Even Better, Retrofit Older T12 Lights With High Performance T8 Lamps
• Benefits: Lighting efficiency can range up to 100 lumens per watt
(T12s range to 56 lumens)
Produces more light than 34-watt T12, while using less energy
Provides better color rendering
Latest generation
Higher light level from a 32-watt
Average life is 20 percent or more longer than standard T8
32
Examples of High Performance Fluorescent Lamps
• Philips Advantage Lamp Series
F32T8/ADV841/ALTO
• GE High Lumen Starcoat Lamp Series
F32T8/XL/SPX41/HLEC
• Sylvania Extreme Lamp Series
FO32/841XPS/ECO
33
Replace Hi-Bay HID Fixtures with T5 High Output Fluorescent Fixtures
• Benefits: Up to 35 percent energy savings
Holds 95 percent of their light level, compared to
65 percent for metal halides
Instant on
Offers reduced glare
No color shifting
On-off controls such as occupancy sensors or manual switching
34
T5HO Specifications
Ordering Code
Initial Lumens
Mean Lumens
Life @ 3 hrs./start
CRI
F54T5/830/HO
5,000 4,740 20,000 85F54T5/835/HO
F54T5/841/HO
F54T5/850/HO
35
T5 & T8 Lamps – Considerations
• T5s are designed for an enclosed fixture where temperature can be consistent. They are optimal at 95o F temperature.
• T8s may become too hot when enclosed and lose some lumens. They are best at 75o F.
36
Retrofit Magnetic Ballast with Electronic Ballast
• Benefits:
Quiet
Cooler, reducing air conditioning load
No lamp flicker
37
Types of Fluorescent Ballasts
• Instant-start ballasts provide full voltage across the electrodes at start-up.
• Rapid-start ballasts have a separate heater circuit that heats up the electrode during start-up and stays on during operation to keep electrodes warm.
• Program-start ballasts directly heat up the electrodes before applying full voltage. Thus, they dramatically increase lamp life for frequently switched operation (occupancy sensors).
38
Examples of High Performance Fluorescent Ballasts
• Advance Optanium Series
IOP-2P32-LW-SC
• GE Ultramax Series
GE-232-Ultramax-L
• Universal Ultim8 Series
Ultim8 B232I120EL
• Sylvania Quicktronic High Efficiency
QHE/UNV ISL-SC
39
Technologies Suitable for
Hi-Bay Applications
(Fixture more than 15’ from surface)
40
Fluorescent Hi-Bay (T5s)
Source: Philips
41
High Intensity Discharge (HID) Lamp Types
• Metal halide
• High pressure sodium
• Mercury vapor
• Low pressure sodium
• Probe-start (no incentive) vs. pulse-start
method (eligible for incentive)
• Glass arc-tube (no incentive) vs. ceramic arc-tube (eligible for incentive)
• Increasing trend of installing T5s in Hi-Bay
applications instead of metal halide
42
Examples of HID Ballasts
• Constant wattage autotransformer – standard ballast used on most HID
• Linear reactor – energy saving, 277-line voltage circuits only, low voltage swing tolerance
• Regulated lag ballast – very tough ballast, handles voltage swings well
• Electronic – relatively new product, first generation had problems with premature failures which have since been corrected
43
Other Choices - Induction
Lots of wattage choices (55 to 165 watts)
Withstands temperature extremes
Vibration resistant
Long life (100,000 hr.) with low maintenance
Electrical wire connections not necessary for individual fixtures
• Up Side
• Down Side
Source: Philips
High initial cost
Lower lumen output
Often require more fixtures than metal halide or fluorescents
44
Additional Elements of a Lighting
System
45
To Reflectorize or Not …
• Specular reflectors add very little value and can increase glare problems
• White reflectors are the best choice
• Polished (specular) reflectors are relatively useless in industrial applications due to dust, blackening, and the likelihood of incorrect cleaning using abrasives
• Even in enclosed fixtures, the reflector needs to be cleaned every 18-24 months with non-abrasive solutions
46
Lenses Come in Various Types . . .
• Acrylic – typical “plastic” lens with little bumps on the exterior to diffuse the light
• Prismatic – an acrylic lens with prisms or honeycombs that attempt to polarize
• Louvered – small and large cell parabolic
• Polarized – small cell parabolic design
• Indirect/direct – pushes light up to the ceiling with some downward light
47
Fixtures are also Mounted in Different Ways . . .
• Recessed – troffers, cans
• Surface – boxes, ceiling, sconces
• Pendant – hanging from ceiling
• Chain/cable/cord – great flexibility, plug cord into ceiling outlet, a flexible cord can be used to reduce vibration
• Hook & cord – Hi-Bay HID
48
Treat Lighting as a System with
Specific Parts:
Lamp, Reflector, Ballast, Housing
49
Fixture Efficiency
• A measure of the percentage of total light exiting the fixture
• For bare lamp applications, fixture efficiency is 100%
• Rarely are lumens reflected out of a fixture: typical efficiencies are in the 60-80% range
• Efficiency increases with a point or thin linear light source
50
Common Lighting Opportunities
Replacing… with… in…can reduce wattage by…
Incandescent or mercury vapor lamp
High output T8 or T5 fluorescent lamp
Hi-Bay lighting 50-75%
T12 fluorescent lamp
T8 fluorescent lamp offices, retail space, schools
50%
Incandescent lamp Compact fluorescent lamp (CFL)
recessed lighting or table lamps
75%
51
Common Lighting Opportunities (cont’d)
Replacing… with… in…can reduce wattage by…
Outdoor incandescent lamp
Hard-wired fluorescent lamp
perimeter outdoor applications
30-75%
High pressure sodium lamp
T8 or T5 fluorescent lamp
indoor applications 50%
52
Lighting Controls Save additional energy and money
53
Infrared – Occupancy/Motion
Passive infrared sensors detect changes in infrared patterns across segmented detection regions, tuned to the region of human body temperature
Source: Leviton
54
Passive Infrared Coverage
Source: wattstopper
55
Outdoor Sensor Example
Source: Leviton
Designed to work
outdoors – in bad
weather or
temperature
extremes
56
Dual Technology: Motion/Occupancy
• Emits ultrasonic waves that reflect back to the sensor. Same system a bat uses to navigate its way, only less complex.
• When a person moves in the room the frequency of the waves reflected off the person changes. The sensor detects these changes and fixtures are turned on/off.
• Useful in conference rooms where people might sit and talk.
57
Dual Technology Coverage
Source: wattstopper
58
Dual Technology Sensor Example
Source: Leviton
• Wall or ceiling mount
• Useful in large conference rooms, classrooms and restrooms
59
Daylight Harvesting Sensor Example
• Consider during design of building
• Use with dimmable ballasts and lamps
• Not recommended for retrofits
60
Case Studies of Some Recent
Lighting Projects
61
Cal Air Metal and Pipe Fabrication Facility
After Lighting Retrofit
400 Metal Halide – (451 watts) 6-lamp T8 fixtures (228 watts)
Uses half the wattage and provides twice as much light!
50 foot-candles
Before Lighting Retrofit
Source: Philips
23 foot-candles
62
Seattle University Benefits from Lighting Retrofit
• New T5s and T8s replaced Metal Halides and T12s, reduced energy usage by 46%
• Increased safety at the pool because reduced glare allows lifeguards to see under the surface of the water
• Reduced maintenance costs because the pool no longer needs to be drained to service lights above the pool
Before Lighting Retrofit After Lighting Retrofit
Source: Northwest Edison
63
Everett Naval Base Benefits from Lighting Retrofit
• New T8s replaced metal halides, reduced energy usage by 60%• Improved visibility, especially of banners and logos on or near walls• Crisper, cleaner atmosphere• Reduced “hot spots” of concentrated light in favor of more uniform light
distribution
Before Lighting Retrofit After Lighting Retrofit
Source: Northwest Edison
64
Gunderson Inc. Benefits from Lighting Retrofit
• New T8s and reflectors replaced T12 VHO to reduce energy usage by 76%
• Light levels increased by 40%
• Saved close to $30,000 in annual electricity costs
• Paid for itself in 5 months after incentives and tax credits
Before Lighting Retrofit After Lighting Retrofit
Source: Christenson Electric
65
How to Decide?
66
Decision Process: Key Questions
Economics Are incentives available? What is the simple payback period?
Lighting Levels Are the current light levels adequate?
Is there an opportunity to lower ambient light levels and use task lighting?
Color Rendering Is color rendering important?
Recommended Technologies
What does the lighting audit or software analysis recommend?
Which technologies and products apply?
Other Opportunities Do occupancy levels provide opportunities for occupancy sensors?
Is there an opportunity for harvesting daylight?
67
Important Note
• There are many products on the market that meet the requirements of the utility’s program
• Some products are superior to others
• For their protection, participating customers should research the products for quality, price, and conformity with the utility’s requirements before making their decision to buy
68
Information about
Commercial & Industrial
Lighting Program
69
Commercial and Industrial Lighting Program
• Has incentives to reduce up-front cost of efficiency improvements
• Easy program administration
• Lighting audits required
• Promotes:
The best light sources for the application
The highest quality light sources
Increased energy efficiency for participating businesses
70
Incentives Available through the Program
Existing Equipment Measure Description $/unit
High Performance T8 Fluorescent Lamps and Electronic Ballast
T12 Fluorescent, T8 De-Lamp, Incandescent or Mercury Vapor
1 lamp and electronic ballast (15 to 44 input watts) $15.00
2 to 4 lamps and electronic ballast (45 to 114 input watts)
$30.00
T8 or T5 Fluorescent Lamps and Standard Electronic Ballast
T12 Fluorescent, T8 De-Lamp, Incandescent or Mercury Vapor
1 lamp and electronic ballast (15 to 44 input watts) $8.00
2 to 4 lamps and electronic ballast (45 to 114 input watts)
$15.00
Hardwired Compact Fluorescent (Hardwired ballast and replaceable lamp)
Incandescent or Mercury Vapor
7 to 49 watts (nominal lamp watts) $30.00
50 to 99 watts $50.00
71
Incentives Available (cont’d)
Existing Equipment Measure Description $/unit
Ceramic Metal Halide Luminaire (New Fixture)
Incandescent or Mercury Vapor
20 to 100 watts $50.00
101 to 250 watts $80.00
Screw-in Compact Fluorescent Lamps (Lamp Only)
Incandescent or Mercury Vapor
3 to 24 watts $3.00
25 to 45 watts $6.00
Over 45 watts $12.00
LED or Cold Cathode Signs
Incandescent or Mercury Vapor
Retrofit kit or Replace existing incandescent sign
$30.00
Induction Lamp Luminaire
Incandescent or Mercury Vapor
100 watts or less (nominal lamp watts) $60.00
Over 100 watts $120.00
72
Incentives Available (cont’d)
Existing Equipment Measure Description $/unitHigh Output Fluorescent Luminaire (New Fixture)
HV/VHO T12, or MV/HPS, or
Probe Start Metal Halide, or Incandescent
85 to 129 watts (ballast input watts) $80.00
130 to 189 watts $100.00
190 to 249 watts $120.00
250 to 600 watts $140.00
Pulse Start Metal Halide Luminaire (New Fixture)
HV/HO T12, or MV/HPS, or
Probe Start Metal Halide, or Incandescent
300 to 399 watts (nominal lamp watts) $100.00
400 to 750 watts $150.00
73
Incentives Available (cont’d)
Existing Equipment Measure Description $/unitOccupancy Sensors and/or Timers
Manual Control 100 to 200 watts controlled $35.00
Over 200 watts controlled $45.00
Retrofit High Output Fixtures with T8 Lamps & Ballasts
8’ T12 HO/VHO, or 4’ HO De-Lamp
1 T8 8' lamp and standard electronic high output ballast
$20.00
(2 to 6) 4' T8 lamps and standard electronic high output ballast
$40.00
Retrofit Very High Output Fixtures with T5 Lamps & Ballasts
8’ T12 VHO 2 T5 lamps and high output ballast $25.00
3-4 T5 lamps and high output ballast $50.00
74
Eligibility Requirements
• Customer requirements Must be a commercial or industrial customer of a participating BPA
utility
Must first have a lighting audit performed
Must sign an agreement with their utility prior to purchasing and installing equipment
• Project requirements All equipment to be installed must meet specifications and
requirements (http://www.test.bpa.gov/Energy/N/projects/Lighting/doc/EEL2007-14_TechnicalSpecs.doc)
For retrofit projects, the affected lighting load must be reduced by at least 30 percent
75
Eligibility Requirements (cont’d)
• Incentive Constraints
Funds are offered on “first-come, first-served” basis
The amount of the incentive cannot exceed 70 percent of the total project cost (including labor)
Minimum recommended project size is $500
• Disposal Requirements
All materials, including PCB ballasts, must be disposed of or recycled in accordance with current environmental laws
76
Steps for Participation
1. Customer completes sign-up form:
Name of business/building and address
Owner’s and lessee’s names and telephone numbers
Building size, number of floors and use (retail, office, etc.)
Type of heating system
Additional information as needed
77
Steps for Participation (cont’d)
2. Utility explains requirements and assesses eligibility
3. Utility schedules a lighting audit
4. Audit findings are reported to the customer
5. If customer wishes to proceed with the project, they sign an agreement with utility
78
Steps for Participation (cont’d)
6. When project is completed, customer notifies utility and submits invoices and supporting information
7. After utility inspects project and provides final approval, customer incentive is paid
79
Questions?
Contact us:
___________ Utility
Energy Conservation Department
P.O. Box 1234
Anytown, WA 98765
800-123-4567
www._______PUD.com