1 LGX PATCH PANEL - Data Center and Telecom cables
Transcript of 1 LGX PATCH PANEL - Data Center and Telecom cables
Fiber
TotalCableSolutions.com Total Cable Solutions 888.235.2097
1 LGX PATCH PANEL
* Can be purchased FULLY LOADED as pictured
P/N: FPP-01-W-10
2019
.12.
03
Grommeted Non-captive Entry Portals - Protects cables from sharp edges and makes future moves, adds and changes easier
Heat Resistant Splice Chip - Installing in a hot climate? Our enhanced splice chip is designed for extreme climates and screws down for a secure connection. PN: ST-PASD-24
ADD-ON
ADD-ON
Universal Compression Grommet - Replaces zip cords for strain relief providing a secure connection PN: CF-B
ADD-ON
DIN Rail Kit - Includes two sturdy brackets to mount to standard 35mm DIN RailPN: FPP-01-W-DINRAIL
ADD-ON
MORE FEATURES• Space saving panel with ample room for cable routing• Non-captive front and rear entry with protective edges• Rear SC cut-outs - Allows for a wallmount MTP® cassette or splitter
SPECIFICATIONS• Dimensions: 5.56" W x 6.125" H x 1.125" D• Panels: (1) Total Cable Solutions or LGX Adapter Panels (see individual panel capacities)• Fiber Capacity: (12) Splice, (24) Patch• Material: 18 Gauge Steel• Coating: black electrostatic polyester powder coat paint
• 4 Cable ties
• 1 Splice chip
• 2 Rubber cable entry grommets
• 4 Cable management clips
• 1 Warning label
• 1 Port identification label
WHAT'S INCLUDED
TotalCableSolutions.com Total Cable Solutions 888.235.2097
E-Z Slide™ Latch
Cable TiesEntry Grommets
Port Label
Warning Label
Splice Chip
Cable Mgmt. Clips
SC Cut-outs - Convert into wallmount splitter, SC simplex, LC duplex, or MTP® cassette