1. Lagunastar-hanstar Solder Iron-direct Plug 220v Ok
3
LAGUNASTAR INDUSTRIES COMPANY 2 nd Floor Robinsons Santa Rosa Market, Santa Rosa City, Laguna 4026 Tel 049 5263124 Fax: 049 5020789 Mobile: 09159089910 Email: [email protected] , [email protected] Website: www.hanstartools.com , http://soldering102.blogspot.com --------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------- LEAD-FREE SOLDERING IRON - DIRECT PLUG 1. HANSTAR 936 AC – ESD safe -the design of the soldering iron is similar to the soldering iron 907. However, it is direct to the AC plu & not need station to operate. Also, unlike other ordinary soldering iron, you can change the style of tips that suited your application as it uses 900M series tips. The new technology ceramic heater results to long life avoiding the nuisance of changin of heating element. It uses only 15W power but its thermal output is even better than traditional 60W soldering iron resulting t BIG Savings! It is fast heating, & applicable for lead-free soldering. Maximum temperature is 400 deg C. it is Hanstar’s lower cost alternative to Hakko Dash 454 series ------------------------------------------------------------------------------------------------------------ --------------------------------------------- 2 . HANSTAR 905F –ESD safe -the design of the soldering iron is similar to the soldering iron 907. However, it is direct to the AC plu & not need station to operate. Also, unlike other ordinary soldering iron, you can change the style of tips that suited your application as it uses 900M series tips. The new technology ceramic heater results to long life avoiding the nuisance of changin of heating element. It has anti-static ground cord with alligator clip. It is 60W, very powerful, fast heating, & perfect for lead-free soldering. It uses only 60WW power but its thermal output is even better than traditional 100W soldering iron resulting to BIG Savings! Default Maximum temperature is 450 deg C, but it can reach 500degC upon adjustment of the “temperature” screw. Note: turn the temperature clockwise to increase the temperature up to 500deg C. It is Hanstar’s lower cost alternative to Hakko Mach 920 series LAGUNASTAR INDUSTRIES COMPANY http://soldering102.blogspot.com
-
Upload
koni-sapphire -
Category
Documents
-
view
75 -
download
2
Transcript of 1. Lagunastar-hanstar Solder Iron-direct Plug 220v Ok
LAGUNASTAR INDUSTRIES COMPANY2nd Floor Robinsons Santa Rosa Market, Santa Rosa City, Laguna 4026Tel 049 5263124 Fax: 049 5020789 Mobile: 09159089910Email: [email protected], [email protected]: www.hanstartools.com , http://soldering102.blogspot.com-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LEAD-FREE SOLDERING IRON - DIRECT PLUG
1. HANSTAR 936 AC – ESD safe -the design of the soldering iron is similar to the soldering iron 907. However, it is direct to the AC plug & not need station
to operate. Also, unlike other ordinary soldering iron, you can change the style of tips that suited your application as it uses900M series tips. The new technology ceramic heater results to long life avoiding the nuisance of changing of heating element.
It uses only 15W power but its thermal output is even better than traditional 60W soldering iron resulting to BIG Savings! It is fast heating, & applicable for lead-free soldering. Maximum temperature is 400 deg C.
it is Hanstar’s lower cost alternative to Hakko Dash 454 series
----------------------------------------------------------------------------------------------------------------------------------------------------------
2 . HANSTAR 905F –ESD safe-the design of the soldering iron is similar to the soldering iron 907. However, it is direct to the AC plug & not need station
to operate. Also, unlike other ordinary soldering iron, you can change the style of tips that suited your application as it uses900M series tips. The new technology ceramic heater results to long life avoiding the nuisance of changing of heating element.
It has anti-static ground cord with alligator clip.It is 60W, very powerful, fast heating, & perfect for lead-free soldering. It uses only 60WW power but its thermal output is even better than
traditional 100W soldering iron resulting to BIG Savings! Default Maximum temperature is 450 deg C, but it can reach 500degC upon adjustment of the “temperature” screw.
Note: turn the temperature clockwise to increase the temperature up to 500deg C.It is Hanstar’s lower cost alternative to Hakko Mach 920 series
------------------------------------------------------------------------------------------------------------------------------------------------------------
3. HS-A60 Adjustable lead-free soldering iron 220V 60W 100-400degC
LAGUNASTAR INDUSTRIES COMPANY http://soldering102.blogspot.com
4. HANSTAR PX- 968
- Equivalent for Goot px-601 , but this is even better because it has LCD temperature controller - 90W , Very Powerful! - Self Temperature Calibrating - comes with Free Solder Iron Stand - very powerful & low price, it will fit the budget & its performance & power is very good. - It is designed for Industrial Factory usage , but its price will also fit the budget of small repair center
Specifications:
Name HANSTAR PX-968 Lead-free soldering iron
Power consumption 90W(Max. 143W)
Input/output voltage Input 220V/Output 220V
Temperature range 0-450 Deg C
Tips items 900M Series
Heating element P1324 (220V printed porcelain )
LAGUNASTAR INDUSTRIES COMPANY http://soldering102.blogspot.com
