1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning...
-
Upload
rolando-mault -
Category
Documents
-
view
213 -
download
0
Transcript of 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning...
![Page 1: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/1.jpg)
1
Electroforming
Presented by
Subject
![Page 2: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/2.jpg)
2
1) Advantages and limitations of the system.
- Concerning weight
- Concerning the model
2) Core
3) Racks and anodes. Harmonisation.
4) Galvanic preparation.
5) Electroforming of gold alloy (tri-metal)
6) Emptying cores
7) Removing the copper coating
8) Annealing
9) Soldering
10) Polishing
INDEX3/14
15/24
25/26
27
28/41
42
43
44
45
46
Figure NoFigure NoMenu
![Page 3: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/3.jpg)
3
Obtains hollow pieces from 100 microns thick, by plating a sheet of metal on a core and removing then the core.
Menu
![Page 4: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/4.jpg)
4
If we admit that a bead with gallons of 10 mm diameter is equivalent to a regular ball
of 9 mm, and in case of 150 microns thick, this ball will weight 0,535 grams
Side area = x ز= x 0.87² = 2.38 cm² Øi = 8.70 mm Øe = 9 mm
Volume = A x e = 2.38 x 150 = 0.036 cm²
10000
Weight sphere = Volume x Gold Density = 0.036 x 15 = 0.535 g
Comparing: Electroforming
Menu
![Page 5: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/5.jpg)
5
Comparing: Casting
If we admit that a bead with gallons of 10 mm diameter is equivalent to a regular ball of 9
mm, if massive, this ball will weight 5,92 grams.
Volume = 4/3 x x R³ V = 4/3 x x 0.45³ = 0.382 cm³ = 9 mm
Weight sphere = Volume x Gold Density P = 0.382 x 15.5 = 5.92 g
Menu
![Page 6: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/6.jpg)
6
Comparing: Stamping If we admit that a bead with gallons of 10 mm diameter is equivalent to a regular ball of 9 mm, and in case of 300 microns thick, this ball will weight
1,11 grams All volume = External volume – Internal volume
Ev = 4/3 x x R³
Ev = 4/3 x x 0.45³ = 0.382 cm³
Iv = 4/3 x x R³
Iv = 4/3 x x 0.42³ = 0.31 cm³
Av = 0.382 - 0.31 =0.0714 cm³
Weight sphere = Volume x Gold Density
P = 0.0714 x 15.5 = 1.11 g
Menu
![Page 7: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/7.jpg)
7
0
1
2
3
4
5
6
grams
Comparing concerning
weight
Electroforming – Casting – Stamping
Menu
![Page 8: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/8.jpg)
8
Electroforming Casting StampingComparing
Getting it Cost
Takes time
High
Getting it Cost
Immediately Low
Getting it Cost
Immediately Low
Menu
![Page 9: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/9.jpg)
9
Week forms
Advisable to avoid in electroforming
Menu
![Page 10: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/10.jpg)
10
Sharp points attracts the current and in consequence:
Current is uneven in different parts of the piece
Thickness of metal electroformed is also uneven.
Menu
![Page 11: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/11.jpg)
11
Straight (sharp) angles with electroforming external or
internal
Model External electroforming Internal electroforming
Round edge Round edge Sharp edgeSharp edge
Menu
![Page 12: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/12.jpg)
12
Comparatively big forms
Menu
![Page 13: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/13.jpg)
13
Resistant surface
Menu
![Page 14: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/14.jpg)
14
Harmonic form allowing even current in all around the surface
Menu
![Page 15: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/15.jpg)
15
Step from core to finished ear ring
Core Electroforming with core Hollow finished ear ring
Menu
![Page 16: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/16.jpg)
16
Most used core specially in gold 18K and 14K
Metallic core. White metal casting Menu
![Page 17: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/17.jpg)
17
Vulcaniser Casting
EQUIPMENT TO PRODUCE METALLIC CORES
(or resin cores sometimes)
Metal furnace
Menu
![Page 18: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/18.jpg)
18
Amber colour wax
Main use in:
Gold 24 K
Gold 18 K and 14 K cold electrolite
Silver
Menu
![Page 19: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/19.jpg)
19
Vulcaniser HdM Mark IV injector with
pneumatic piston
Gun for metal
coating
Equipment to produce wax cores. Menu
![Page 20: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/20.jpg)
20
Equipment to produce resin cores
Manual mix of resin and catalizer
Manual pouring of resin in the
mold.
Catalized liquid silicone mold
Menu
![Page 21: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/21.jpg)
21
Equipment to produce resin core
(2)
Gun for metal
coating HdM Vacuum machine to
remove air bubbles
Menu
![Page 22: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/22.jpg)
22
Resin cores
Used mainly in :Silver
Copper
For pieces were core is not removed (not hollow pieces)
Menu
![Page 23: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/23.jpg)
23
From now on the presentation is limited to;From now on the presentation is limited to;
1)Metallic cores because they are the most 1)Metallic cores because they are the most characteristics of the processcharacteristics of the process
2)Alloyed gold electroforming, because it is the most 2)Alloyed gold electroforming, because it is the most sophisticated process. sophisticated process.
3)Warm electrolites as they are the most popular in 3)Warm electrolites as they are the most popular in all oyed gold electroforming, because:all oyed gold electroforming, because:
Its rose colour is much better accepted that the green Its rose colour is much better accepted that the green colour in 18 K and almost white in 14K of cold colour in 18 K and almost white in 14K of cold
electrolites (bi-metallic gold-silver)electrolites (bi-metallic gold-silver)
Menu
![Page 24: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/24.jpg)
24
Main Advantages of metallic cores:
1) Can be grinded, burnished and polished, making better the quality of the finished piece.
Disc finishing for grinding and polishing
Burnishing machine
2) There are reusable alloys
3) Stand warm electrolytes without expansion
Menu
![Page 25: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/25.jpg)
25
Racks and anodes. Harmonisation.
Racks
-Rounds to get more even galvanic current all around the rack
-Steady connection core-rack (screw or soldering)
-Uniform core spreading
-Core of similar form and shape.
Menu
![Page 26: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/26.jpg)
26
Anodic system designed to obtain a distribution of current on the cathodic rack as even as possible
+
-Cathode
Anode
Menu
![Page 27: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/27.jpg)
27
Galvanic preparation
Previous to electroforming
Degreasing
Alkaline copper (Cu. Al.)
Acid copper (Cu. Ac.)
Previous to emptying
Protection coating of Acid copper (Cu. Ac.)
Menu
![Page 28: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/28.jpg)
28
Electroforming of gold alloy (tri-metal)
• Surface determination• Targets• Characteristics of GF electrolite. Ageing.• Computer programm• AUROFORM controlling systems based on the rack
weight increase.• Economy of GF electrolite• System of pieces control, when removed for rack.• Capacity of installation AUROFORM
Menu
![Page 29: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/29.jpg)
29
Reckoning of pieces surface on the racks.
It is important to reckon the area of the surface of the models (before fitting on the rack). Knowing the surface of the pieces the right intensity of current can be applied.
The surfaces of the models are introduced in a data base of computer programm developed for Auroform. This is the process we recomend
Objeto Peso1 Peso2 diferencia Área Factor Área Factor Media
A 3.0861 3.1862 0.1001 35.62 355.87 35.53 354.95 35.58
B 2.6301 2.7152 0.0851 30.28 355.87 30.21 354.95 30.25
Menu
![Page 30: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/30.jpg)
30
Targets • Supposing we are using: - Models matching with the process
- Cores with good surface- Rack matching with the type of pieces.- Core-Rack-Anodes harmonic
• The targets ares:- Control and security of the karat- Quality of surface
- Even thickness.
Menu
![Page 31: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/31.jpg)
31
1 -Control system
according to rack weight increases.
2 -Characteristics of electrolite.
Ageing.
Most important for those Most important for those targetstargets are: are:
+ ELECTROLITE LONGER LIFE +
CONSISTENT REACTION OF ELECTROLITE
Menu
![Page 32: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/32.jpg)
32
3 Computer programm of command and control Menu
![Page 33: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/33.jpg)
33
Characteristics of electrolite GF Characteristics of electrolite GF AgeingAgeing
• Electrolite GF offers:- Reliable behaving. Remarkable tolerance on error- Very slow ageing. Normally 50 turnovens- If electrolite contains 450 grams of gold, his
medium life will allow to produce: 50 x 450 = 22500 Grams of alloy electroformed
ElectroliteElectrolite Microns per hour Microns per hour (eficacity) (eficacity)
Weight of a micron Weight of a micron in on dm2 in on dm2
Minutes per micron.Minutes per micron.
GF 14K 34 0.13 2
GF 18K 27 0.15 2.5
Menu
![Page 34: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/34.jpg)
34
Computer programm GF
- Reckons the pieces on the rack surface according to the information in the Data Base
- Reckons the condition of the electolite also according to the information in the Data Base
- Admits to enter: How many microns. Number of controls etc. - Commands the intensity of the rectifier - Process the information of every control and change
intensity accordingly - Controls all the conditions in the process are kept
inside the limits required. - Stops the process when the required microns has been
electroformed.
Menu
![Page 35: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/35.jpg)
35
AUROFORM control system based on the rack weight increase
Tri-metal electrolyte electroforming, controls the karat as per the weight increase of the alloy electroformed which is introduced in the computer program.
- Weight =Karat too low
+ Weight =Karat too hight
Menu
![Page 36: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/36.jpg)
36
AUROFORM weight control is:
Very reliable
Almost instantaneous
Working position Control position
Menu
![Page 37: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/37.jpg)
37
ECONOMY OF GF ELECTROLITE
GF admits that AUROFORM produce automatically one of the components:
Saving money
Not introducing components not needed, which will harm the electrolite
Menu
![Page 38: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/38.jpg)
38
Control system of the pieces removed from rack
System Answer Cost (Euros)
X ray fluorescence Inmediate Five digits
Assaying Hours Four digits
Menu
![Page 39: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/39.jpg)
39
AUROFORM Production
Keeps
Stability in temperature and level of the electrolite
Continious filtering of electrolite
Permanent interface with the computer programm.
Menu
![Page 40: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/40.jpg)
40
90 L 150L
Max. W
eight (grams)
Time (hours)
Max. area (dm²)17 25
Max
. Wei
ght (
gram
s)
14 K Productuion capacity
Menu
![Page 41: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/41.jpg)
41
90 L 150L
20 30
Max
. Wei
ght (
gram
s)M
ax. Weight (gram
s)
Time (hours)
Max. area (dm²)
18 K Productuion capacity
Menu
![Page 42: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/42.jpg)
42
Emptying the cores
Holes
Every piece has to have two holes. Ideally opposite
A flat area around the hole can be convenient to make easier, soldering complements
Pieces are locate between silicone discs. Heat and centrifugal action are applied.
Emptying with heat and centrifugal force Menu
![Page 43: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/43.jpg)
43
Removing copper lay
Acids system
Toxic fumes are produced
Menu
![Page 44: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/44.jpg)
44
Annealing
Pieces electroformed are very bristle
An annealing treatment is required
Very convenient to do in control atmosphere
furnace.
Menu
![Page 45: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/45.jpg)
45
Assembling and soldering Assembling
-Nornal jewellery techniques are used
Soldering
Due to its low density and thickness, it is advisable:
- -Avoid soldering when possible
-Solder with minimum temperatura and exposure.
Menu
![Page 46: 1 Electroforming Presented by Subject. 2 1) Advantages and limitations of the system. - Concerning weight - Concerning the model 2) Core 3) Racks and.](https://reader035.fdocuments.us/reader035/viewer/2022062620/551a32a8550346cb358b50d7/html5/thumbnails/46.jpg)
46
Polishing
Manual or turbo polishing is advisable in order the piece has a soft treatment and with no hitting.
Menu