(1) EC-Type Examination Certificatea threaded cover or glass cover and different threaded entry...
Transcript of (1) EC-Type Examination Certificatea threaded cover or glass cover and different threaded entry...
i:lUi;B ;f:lii
(1) EC-Type Examination Certificate(2) Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres -
Directive 94/9/EC
(3) EC Type Examination Certificate Number
EPS 13 ATEX 1 514 X Rev. 0
(4) Equipment:
(5) Manufacturer:
(6) Address:
GUß Series Control & Junction boxes Type GUB.00, GUB.01, GUB.02,GUß.03, GUB.03-C, GUß.04, GUß.05, GUB.06
Prota# Proje Mühendislik lnÿaat Elektrik San. Tic. Aÿ.
Örnek Mah. Fehmi Tokay Cad. No:12 Göztepe Plaza K:3 D:6 AtaÿehiriSTANBUL-TÜRKIYE
(7)
(8)
This equipment and any acceptable variation thereto are specifled in the schedule to this certificateand the documents therein referred to.
Bureau Veritas Consumer Products Services Germany GmbH, Notifled Body No. 2004 in accord-rdance with Adicle 9 of the Council Directive 94/9/EC of March 23 1994, certifies that this equipment
has been found to comply with the Essential Health and Safety Requirements relating to the designand construction of equipment and protective systems intended for use in potentially explosive at-mospheres, given in Annex II of the Directive. The examination and test results are recorded in theconfidential report 12TH0058.
(9) Compliance with the Essential Health and Safety Requirements has been assured by compliancewith:
EN 60079-0:2009 EN 60079-1:2007
(lo)
(11)
If the sign "X" is placed after the certificate number, it indicates that the equipment is subject tos conditions for safe use specified in the schedule to this cedificate.
This ype Examination Cedificate relates only to the design and the construction of the speci-fied equJpment in accordance with Directive 94/9/EC. Further requirements of this Directive apply tothe manufacture and supply of this equipment.
(12) The marking of the equipment shall include the following:
Ex d IIB+H2 T6 Gb:b IIIC T85°C Db IP66
Certificati,
Türkheim, April 16, 2013
°oÿ "-.J_.ÿ..ÿ=5 .,°
as C €ÿÿ Gc ' Page 1 /3Certificates without signature are void. This cediflcate is allowed to be distribuled only if not modified.Exiracts or modifications taust be authorized by Bureau Verilas Consumer Products Services Germany GmbH.EPS 13 ATEX 1 514 x Rer. 0
ni-ÿ.w|Bÿa-:ÿ.TiLÿ diIkVJ1:41-1 It f_,ÿ']
(I 3)
(14)
Annexe
EC=Type Examination Certificate EPS 13 ATEX 1 514 X Rer. 0
Descri tion ofe ui ment:
The GUß Series are control and junction boxes for installation of terminals, measurement instru-ments or control equipment. The construction is made by cast aluminium rectangle enclosures witha threaded cover or glass cover and different threaded entry variations. The enclosure fulfils IP66protection and can be used in zone 1/21 or 2/22.
Electrical data:
Max Voltage: 380 /415 Vac
Max current: 225A depending on component ratings and enclosure size.
Max power dissipation for temperature class T6/T85°C:
GUB00 20W
GUß01 25W
GUB02 45W
GUß03 70W
GUBO4 100W
GUß05 180W
GUB06 230W
Conditions of manufacture:
The installation of components inside the enclosure must be carried out according to the require-ments of Annex D of EN 60079-1
(16) Test )ort: 12TH0058
Page 2 / 3Certificates without signature are void. This certificate is a]lowed to be distributed only if not modified.Extracts or modifications must be authorized by Bureau Veritas Consumer Proclucts Services Germany GmbH.EPS 13 ATEX 1 514 x Rer. 0
EC-Type Examination Certificate EPS 13 ATEX 1 514 X Rev. 0
(17) _ÿoecial conditions for safe use:
Conditions of manufacture and operation:
For connection of the boxes only separately certified cable entries or conduit systems which meerthe requirements of EN 60079-1 section 13 shall be used.
Before opening of enclosure after switch oft, a minimum delay time of 30min must be respected.
Any openings shall be closed as specifled in EN 60079-1, section 11.
(18) Essential health and safety requirements:
Met by standards.
ifica ,sion protection Türkheim, April 16, 201gùÿ
D. Zit2\-\\
Page 3 / 3Certificates without signature are void. This certificate is allowed to be distributed only if not modified.Extracts or modifications must be authorized by Bureau Veritas Consumer Products Services Germany GmbH.EPS 13 ATEX 1 514 x Rev. 0