1-Concentration Units S12
-
Upload
jon-bisu-debnath -
Category
Documents
-
view
226 -
download
0
Transcript of 1-Concentration Units S12
-
8/13/2019 1-Concentration Units S12
1/20
1-Concentration Units_S12.doc
1
CONCENTRATION UNITS (SJ, p.14-23)
1) mg/L - mg of substance (solute) dissolved in 1 liter of H2O (solvent), (mass/volume)
1 mg 1 mg 1 g 103L 1 g-------= -------- --------- --------- = -------
L L 103mg 1 m3 m3
1 g 1 g 1 lb 1 m3 10
6 gal 8.34 lb
------- = -------- ------------- --------------- ------------ = ----------m3 m3 453.59 g 264.173 gal 1 MG 1 MG
2) ppm - parts per million, mg of substance (solute) dissolved in 1 kg of H2O (solvent),(mass/mass)
Mass fraction, ppmm- the mass of constituentiper unit mass of solution, with units
such as mg/kg or g/g
- This is commonly used to express the concentration of constituents in a solid phase.
- For example, a concentration of 1 ppmmin a solid phase means that there is 1 mg of the
given species per kg of solid.
1 mg 10-3g 1 g 1 kg------- = --------- = -------- = ---------- = 1 ppmm
kg 103g 10
6g 10
6kg
1 g 10-6
g 1 g 1 kg------- = --------- = -------- = --------- = 1 ppmm
g g 106g 10
6kg
Notes: a. Exception, volume/volume in air pollution.
b. 1 liter of H2O = 1 kg in normal environment *Thus, 1 mg/L = 1 mg/kg = 1 ppm
1 ug/L = 1 ug/kg = 1 ppb
1 ng/L = 1 ng/kg = 1 ppt
* Strictly speaking ppm = mg/L only for pure water at 4oC. However, at room temperature, the
effect of temperature on fluid density is negligible up to about 7,000 ppm dissolved solids.
3) M, molarity, moles/L
- number of moles of substance (solute) dissolved in 1 liter of H2O
* mole - quantity of compound that has a wt in grams equal to molecular weight of the compound
-
8/13/2019 1-Concentration Units S12
2/20
1-Concentration Units_S12.doc
2
Example: If 49 g of H2SO4is dissolved in 1 liter of H2O, what is molarity of the H2SO4solution?
For H2SO4(atomic mass; H = 1, S = 32, O = 16):gram MW = (1 x 2) + 32 + (16 x 4) = 98 g/mol
49 g 1 mol 0.5 mol
M = -------- ---------- = ----------- = 0.5 M1 L 98 g L
4) Logarithmic units
- If chemical concentrations range over many orders of magnitude, it is convenient to express
their values in logarithmic units.
- By convention, a lowercase ppreceding a symbol is used to designate the negative, base-10
logarithm (log10) of the value associated with the symbol
Examples:
pC = log{M} e.g., pH = log {H+} where {activity}
pC = log[M] e.g., pH = log [H+] where [molarity]
Example (FE exam) The pH of a 0.001 M HCl solution is
(A) 1
(B) 3(C) 5
(D) 7
(Solution)
Since HCl is a strong acid, it dissociate completely in water: HCl H+ + Cl
-
pH = - log10[H+] = log10{1/[H
+]} = log10{1/0.001} = 3
Answer is (B).
Note: Molarity (M) is the number of gram-moles of solute per liter of solution. To calculate pH,
the ionic concentration of H+
ions in moles per liter is needed. This is equal to the molarity forHCl.
-
8/13/2019 1-Concentration Units S12
3/20
1-Concentration Units_S12.doc
3
5) Mole fraction
- the number of moles of a species ias a fraction of the total number of moles of all substances inthat phase.
Number of moles of a speciesi
Mole fraction = ---------------------------------------------------Total number of moles of all substances
in the phase
For a mixture of molecules 1, 2, 3, , the mole fraction of molecule 1 is
n1
x1= -------------------------
n1+ n2+ n3+ . . . .
where n i= number of moles for molecule i
From Henrys law, the partial pressure is proportional to the mole fraction.
n1
p1 = x1P = ------------------------ Pn1+ n2+ n3+ . . . .
where p1 = partial pressure of molecule 1n i= number of moles for molecule iP = total pressure ( P = p1+ p2+ p3+ . . . . )
Example 1.1 (Benjamin, p. 10): A solution contains 8 g /Llead (Pb, atomic mass 207). Expressthis concentration as:
i) moles per liter,
ii) ppmm, and
iii) the mole fraction of Pb.
Assume the solution has a density of 1 g/mL.
i) mol/L
8 1
10
1
2073865 10
6
8
g
L
g
g
mol
gx mol L
= . / (M)
ii) mass fraction, ppmm
3
6 3 9 6 6
8 1 1 1 8 8 10 1
10 10 1 10 10 1 / 10
mg g kg L kg x kg ppm
L g g kg kg kg kg kg
= =
-
8/13/2019 1-Concentration Units S12
4/20
1-Concentration Units_S12.doc
4
38 10 0.008m mx ppm ppm
= =
iii) mole fraction
a) The molar concentration of Pb in the solution = 3.865 x 10-8
mol/L from 1)
b) The molar concentration of water is
(assuming that the solution is pure water, MW = 18 g/mol)
1000
1855556
g
L
mol
gmol L
= . /
c)
Mole fraction of Pb moles of Pb in solution
total moles of all species in solution
x M
x Mx
=
=
+
=
3 865 10
3 865 10 55 5566957 10
8
8
10.
( . . ).
Example(Lindeburg, Review Manual, p 35-5): A wastewater treatment plant uses chlorine gas as a
reactant. A tank is filled with 800 m3of 20Cwater, and chlorine is added at a dosage of 125 g per
cubic meter of water. (Assume all of the chlorine dissolves and none initially reacts chemically.)
If the atmospheric pressure is 1.0 atm, what is the theoretical partial pressure of the chlorine gas at
the tank surface immediately after the gas is added?
( A) 3.1 x 10-5
atm ( B) 2.3 x 10-4
atm ( C) 0.039 atm ( D) 0.11 atm
(Solution) Approach:
1) determine the masses of Cl2and H2O.
2) determine the number of moles of Cl2and H2O.
3) determine mole fraction of Cl2
4) calculate the partial pressure of Cl2
1) The mass of chlorine in the tank is
(0.125 kg Cl2/m3H2O) (800 m
3H2O) = 100 kg Cl2= 100 000 g Cl2
The mass of water in the tank is
(800 m3H2O) (1000 kg/m
3) = 8 x 10
5kg H2O = 8 x 10
8g H2O
2) The MW of Cl2= (2)(35.5) = 71 g/mol
The MW of H2O = (2)(1.00) + 16.0 = 18.0 g/mol
-
8/13/2019 1-Concentration Units S12
5/20
1-Concentration Units_S12.doc
5
Determine number of moles
100 000 g Cl2
nCl2 = ----------------------- = 1408 moles of Cl2
71 g Cl2/ mol Cl2
8 x 108g H2O
nH2O = -------------------------- = 4.44 x 107 moles of H2O
18 g H2O / mol H2O
3) Mole fraction is
n1 nCl2 1408 mol
x1= ------------------------- = --------------- = ------------------------------------------
n1+ n2+ n3+ . . . nCl2 + nH2O 1408 moles + 4.44 x 107 moles
= 3.17 x 10-5
4) From Henrys law, the partial pressure is proportional to the mole fraction.
p1 = x1P = (3.17 x 10-5
) (1 atm) = 3.17 x 10-5
atm
Answer is A.
6)meq/L- mg/L per equivalent weight (eq.wt or EW)
* Equivalent weight (eq.wt), mg/meq, g/eq
- the weight of an element or compound which, in given chemical reaction, has the same
combining capacity of 8 g of oxygen or 1 g of hydrogen.
MW g/mol g mg
eq.wt = ----------- = ---------- = ------ = ---------
z eq/mol eq meq
where MW = molecular or atomic weight (g/mole)
z = ion valence, ion charge for ions= # of protons (H
+) or OH
-that can contribute to
an acid/base reaction.
= change in valence of the ion or radiation in a redox
reaction.
Unit of z: eq/mol or meq/m mol
-
8/13/2019 1-Concentration Units S12
6/20
1-Concentration Units_S12.doc
6
mg/L mg/L
meq/L = ------- = ----------- = meq/L
eq.wt mg/meq
meq m mol
meq/L = z (m moles/L) = ---------- --------- = meq/Lm mol L
Example: Determine eq.wt of CaCO3
Atomic weight Ca = 40, C = 12, O = 16
gram MW = 40 + 12 + (16 x 3) = 100
CaCO3 Ca2+
+ CO32-
(z = 2)
2 H+
+ CO32-
H2CO3
MW 100
eq wt = -------- = -------- = 50 mg/meq
z 2
7) N, normality, eq/L - number of equivalents per liter
- mass of substance per L / eq wt
- refers to a reaction or assumed reaction
1 N = 1 eq/L = 1000 meq/L
Note: N = z M
eq mol eq
N = z (M) = ------- ------- = ----
mol L L
Note: What is the unit of z?
N eq/L eq meqz = ------- = ---------- = ------- = ----------
M mole/L mole mmole
eq
z = -------
mole
-
8/13/2019 1-Concentration Units S12
7/20
1-Concentration Units_S12.doc
7
Examples
Convert 100 mg/L CaCO3to M, N, meq/L. (MW = 100 g/mole)
100 mg 1 g 1 mol
----------- ------------- --------- = 1 x 10-3
mol/L = 0.001 M
L 1000 mg 100 g
mg/L 100 mg/L
meq/L = ---------- = -------------- = 2 meq/L
eq. wt 50 mg/meq
= 2 x 10-3
eq/L = 0.002 N
or
2 eq 0.001 mol 2 eq
N = z M = --------- -------------- = ------- = 0.002 N
mol L L
eq/L 0.002 eq/L
M = --------- = --------------- = 0.001 moles/L
z 2 eq/ mol
Examples
1. What is normality of the solution when 0.98 g of H2SO4is dissolved in 1 L of H2O?
H2SO4 (MW = 98) H2SO4 2 H+
+ SO42-
H 2 x 1 = 2
S 1 x 32 = 32
O 4 x 16 = 64
-------------------------
H2SO4 98
MW 98
eq. wt = --------- = ------- = 49 g/eq
z 2
0.98 g 1 eq 0.02 eq
------- --------- = ----------- = 0.02 N
L 49 g L
-
8/13/2019 1-Concentration Units S12
8/20
1-Concentration Units_S12.doc
8
2. Convert 24 mg/L of Ca2+
and 100 mg/L of Cl-to meq/L
-------------------------------------------------------------------------------------
AW Charge eq.wt mg/L
Ions Conc. or ------------
MW z MW/z mg/meq
Species FW
(mg/L) (g/mole) (eq/mole) (mg/meq) (meq/L)-------------------------------------------------------------------------------------
Ca2+
24 40.1 2 40.1/2 = 20 24/20 = 1.2
Cl- 100 35.4 1 35.4/1= 35.4 100/35.4 = 2.8
--------------------------------------------------------------------------------------
3. Convert 100 mg/L of Ca2+
to molarity (M); Atomic Weight of Ca2+
= 40 g/mole
100 mg mol g 2.5 x 10-3
moles
------------- -------- ---------- = -------------------- = 2.5 x 10-3
M
L 40 g 103
mg L
8) epm, equivalents per million - ppm of substance per eq.wt
ppm
---------- = epm
eq.wt
- useful unit for comparison of anion and cation concentrations.
9) % strength (%S)
wt of solute
% S = --------------------- x 100
wt of solution
where wt of solution = wt of solute + wt of solvent
1 g of substance is mixed with 99 g of water
1 g
% S = --------------- x 100 = 1 %
1 g + 99 g
Note:
1 g 1,000 mg 1 kg
1% = --------- = -------------- -------- = 10,000 mg/L
100 g 0.1 kg 1 L
Assume the density of the solution D= 1
-
8/13/2019 1-Concentration Units S12
9/20
1-Concentration Units_S12.doc
9
Example (FE exam) Water and SO3combine to sulfuric acid, H2SO4, according to the following
reaction.
H2O + SO3 H2SO4
How many grams of water must be added to 100 g of 20% olem (20% SO 3and 80% H2SO4) by
weight) to produce a 95% solution (by weight) of sulfuric acid?
(Solution)
- Olem solution is 80% (by weight) H2SO4, which is to be increased to 95% (by weight) by adding
H2O.
- The reaction takes place based on molar concentrations.
MW of
H2O 2 (1.0 g/mol) + 16 g/mol = 18.0 g/mol
SO3 32.1 g/mol + 3(16 g/mol) = 80.1 g/mol
H2SO4 2 (1.0 g/mol) +32.1 g/mol + 4(16 g/mol) = 98.1 g/mol
H2O + SO3 H2SO4
1 mol 1 mol 1 mol
MW 18.0 g/mol 80.1 g/mol 98.1 g/mol
1 4.45 5.45 normalized per MW of H2O
x 4.45x 5.45x for unknown mass of water x
For a 95% solution,
2 4
2 4 3
0.95 H SO
H SO SO
m
m m=
+
Note all H2O is converted to H2SO4.
( ) ( )2 4
2 4 3
800.95
80 20H SO
H SO SO
g new m
g new m g reacted m
+=
+ +
Let x be the mass of the water added.The mass of SO3reacted is 4.45x.The mass of new H2SO4 produced is 5.45x.
( ) ( )
80 5.45 80 5.450.95
80 5.45 20 4.45 100
g x g x
g x g x x
+ += =
+ + +
x = 3.33 g Answer is: 3.33 g of water must be added.
-
8/13/2019 1-Concentration Units S12
10/20
1-Concentration Units_S12.doc
10
10) Partial pressure for gas, atm
e.g., Pco2= 10-3.5
atm
11) Color Unit for color
12) TU, JTU, NTU for turbidity
Turbidity is a measure of suspended material in water
Absorptometry measure transmitted light
Jackson candle turbidity meter (unit: JTU)Range: 40-1000
Nephelometry measure scattered light
Hach turbidity meter (unit: NTU)Range: 0-50
Absorptometry Nephelometry
Photo tube
particle Photo tube
Light
source
-
8/13/2019 1-Concentration Units S12
11/20
1-Concentration Units_S12.doc
11
13) Radionuclides
Radioactivity
Conventional Units:Curie, Ci 1 Ci = 3.7 x 10
10disintegrations per sec
= 103mCi = 106Ci = 109nCi = 1012pCi
Systeme International (SI) Units:
Becquerel, Bq 1 Bq = 1 disintegration per sec
1 Bq = 2.7027 x 10-11
Ci1 kBq = 103Bq
1 MBq = 106Bq
1 GBq = 109Bq
Dose
Conventional Units:Rad 1 Rad = 100 ergs/gram = 0.01 J/kg
1 Rad = 0.01 Gy = 1 centigray (cGy)
Systeme International (SI) Units:
Gray, Gy 1 Gy = 1 J/kg = 100 Rad
1 Gy = 100 cGy
Dose Equivalent
Conventional Units:
Rem 1 Rem = 103
mrem = 0.01 Sv
Systeme International (SI) Units:
Sievert, Sv 1 Sv = 1 J/kg = 100 Rem
1 mSv = 100 mrem
-
8/13/2019 1-Concentration Units S12
12/20
1-Concentration Units_S12.doc
12
mg/L as something
e.g., mg/L as N; mg/L as P; mg/L as CaCO3
Example (SJ p. 15) If we were to analyze a solution of ammonium nitrate (NH4NO3), and find that100 mL of solution contained 36 mg NH4
+and 124 mg NO3-.
1) What are concentrations of NH4+and NO3-in mg/L?2) What is the total N concentration?
(Solutions)
1)
Dissolution reaction:
NH4NO3 > NH4+ + NO3
-1 mol 1 mol 1 mol
NH4+
36 mg NH4+
103
mL 360 mg NH4+
--------------- ----------- = ------------------
100 mL 1 L L
NO3- 124 mg NO3
- 103mL 1240 mg NO3-
--------------- ----------- = --------------------
100 mL 1 L L
2)
Calculate MW:
N = 14 g/mole = 14,000 mg/mole
NH4+
= 18 g/mole = 18,000 mg/mole since N=14 and H=1; (MW = 14 + 4(1) =18 g/mol)NO3
-= 62 g/mole = 62,000 mg/mole since N=14, O=16; (MW=14 + 3(16) = 62 g/mol)
as N
For NH4+-N: 360 mg NH4
+ 14,000 mg N/mol 280 mg NH4
+-N
------------------ ---------------------------- = ----------------------L 18,000 mg NH4
+/mol L
For NO3--N
: 1240 mg NO3- 14,000 mg N/mol 280 mg NO3
--N
-------------------- --------------------------- = -----------------------L 62,000 mg NO3
-/mol L
Total N = 280 mg N/L + 280 mg N/L = 560 mg N/L
-
8/13/2019 1-Concentration Units S12
13/20
1-Concentration Units_S12.doc
13
or
For NH4+ 360 mg NH4
+ 14 mg N/meq 280 mg NH4
+-N
----------------- ------------------------- = ----------------------
L 18 mg NH4+/meq L
For NO3- 1240 mg NO3- 14 mg N/meq 280 mg NO3--N-------------------- ------------------------- = -----------------------
L 62 mg NO3-/meq L
Total N = 280 mg N/L + 280 mg N/L = 560 mg N/L
Example Water contains 35 mg/L of calcium ion and 15 mg/L of magnesium ion. Express the
hardness as mg/L of CaCO3.
mg/L MW z eq.wt (mg/meq) meq/L
MW/z
--------------------------------------------------------------------------------------------------------------------CaCO3 100 2 100/2 = 50
--------------------------------------------------------------------------------------------------------------------
Ca2+
35 40.08 2 40.08/2 = 20.04 35/20.04 = 1.746
Mg2+ 15 24.30 2 24.30/2 = 12.15 15/12.15 = 1.235
--------------------------------------------------------------------------------------------------------------------
Total Hardness = Ca2+
+ Mg2+
= 1.746 + 1.235 = 2.981 meq/L
2.981 meq 50 mgTotal Hardness as CaCO3= -------------- ---------- = 149 mg/L as CaCO3
L meq
Note:
meq mg/L mg/L
------- = ---------- = ------------L eq. wt mg/meq
-
8/13/2019 1-Concentration Units S12
14/20
1-Concentration Units_S12.doc
14
Example(Sato): NBOD
NH3+ 2 O2 WNO3- + H2O + H
+
NH4+ + 2 O2 WNO3
- + H2O + H
+
Using the reactions above, calculate the theoretical NBOD of a wastewater containing:
a) 15 mg/L of ammonia (NH3)
b) 15 mg/L of ammonia as nitrogen (NH3-N)
c) 15 mg/L of ammonium (NH4+)
d) 15 mg/L of ammonium as nitrogen (NH4+-N)
(Solution)
a)
g O2 (2 mol)(32 g/mol) 3.765 g O2 3.765 mg/L O2
----------- = -------------------------- = --------------- = --------------------
g (NH3) (1 mol)(17 g/mol) 1 g NH3 1 mg/L NH3
3.765 mg/L O2
Th NBOD = (15 mg/L NH3) (----------------------) = 56.5 mg/L O2
1 mg/L NH3
b)
g O2 (2 mol)(32 g/mol) 4.571 g O2 4.571 mg/L O2
---------------- = -------------------------- = ---------------- = --------------------
g (NH3-N) (1 mol)(14g/mol) 1 g NH3 1 mg/L NH3
4.571 mg/L O2
Th NBOD = (15 mg/L NH3) (----------------------) = 68.6 mg/L O2
1 mg/L NH3
c)
g O2 (2 mol)(32 g/mol) 3.556 g O2 3.556mg/L O2
----------- = -------------------------- = --------------- = --------------------
g (NH4+) (1 mol)(18 g/mol) 1 g NH4
+ 1 mg/L NH4
+
3.556 mg/L O2
Th NBOD = (15 mg/L NH3) (----------------------) = 53.3 mg/L O2
1 mg/L NH3
d)
g O2 (2 mol)(32 g/mol) 4.571 g O2 4.571 mg/L O2
---------------- = ------------------------- = -------------------- = -----------------------
g (NH4+-N) (1 mol)(14g/mol) 1 g NH4+-N 1 mg/L NH4+-N
4.571 mg/L O2
Th NBOD = (15 mg/L NH3) (---------------------) = 68.6 mg/L O2
1 mg/L NH3
Note that the ThNBOD values for NH3-N and NH4+-N are the same.
-
8/13/2019 1-Concentration Units S12
15/20
1-Concentration Units_S12.doc
15
Example: Convert 1 mg/L Na2HPO4as P to moles /L (M)
(Solution)
Note that:i) mg/L Na2HPO4 as P (Na2HPO4-P) is the concentration of P.
Therefore,
1mg P mol g P 3.23 x 10-5
mol P
----------- ------------- ---------------- = --------------------- = 3.23 x 10-5
ML 30.97 g P 1000 mg P L
Note that:i) the concentration is given as P (1
stterm).
ii) one mole of P is 30.97 g (2nd
term)
iii) one gram P is 1000 mg P (3rd
term)iv) 1 M of Na2HPO4-P is 1 M of P
Na2HPO4 2Na+ + HPO4
-
1 M 2 M 1 M
Na=23; H=1; P=31; O=16
Na2HPO4= 142 g/mol (23x2 +1+31+16x4 =142)
NaH2PO4= 120 g/mol (23+2+31+16x4=120)
H3PO4= 98 g/mol (3+31+16x4=98)
Bar Diagram (Bar Graph) and Stiff Diagram
- purpose is visualization of the chemical composition.
- data can be expressed in meq/L (milliequivalents per liter).
a. Top row of the bar graph consists of major cations arranged in the order Ca 2+, Mg2+, Na+, K+.
b. Bottom row of the bar graph is aligned in the sequence of CO32-, HCO3
-, SO4
2-, Cl-, NO3-.
c. The sum of the positive meq/L equalsthe sum of the negative meq/L for a water in equilibrium
(if all ions were correctly analyzed).
Ion Balance or I Cations - Anions l
Charge Balance = --------------------------------- x 100
Cations + Anions
Charge Balance < 5% OK
-
8/13/2019 1-Concentration Units S12
16/20
1-Concentration Units_S12.doc
16
Bar Diagram - Example
-
8/13/2019 1-Concentration Units S12
17/20
1-Concentration Units_S12.doc
17
-
8/13/2019 1-Concentration Units S12
18/20
1-Concentration Units_S12.doc
18
Jackson and Patterson (1982)
Pizometer HA1
(a) (1) (2) (3) (4) (5) (7)(3)/(4) (2)/(5)
Cation AW/MW z eq.wt Cummu.mg/L eq/mol mg/meq meq/L
Ca2+ 12.0 40.1 2 20.1 0.60 0.6Mg2+ 2.0 24.3 2 12.2 0.16 0.76Na+ 91.0 23 1 23.0 3.96 4.72K+ 1.8 39.1 1 39.1 0.05 4.77Fe2+ -- 55.8 2 27.9 0.00 4.77Mn2+ 0.03 54.9 2 27.5 0.001 4.77Sr2+ 0.00 87.6 2 43.8 0.000 4.77
Anion
HCO3- 12.2 61.0 1 61.0 0.20 0.2SO42- 15.1 96.1 2 48.1 0.31 0.51Cl- 170.0 35.4 1 35.4 4.80 5.32NO3- 3.5 62.0 1 62.0 0.06 5.37Others -- -- 5.37
(b) Ion Balance -5.9629
-
8/13/2019 1-Concentration Units S12
19/20
1-Concentration Units_S12.doc
19
Unit of (7):
mg/L
------------ = meq/L
mg/meq
Ion Balance or I Cations - Anions l
Charge Balance = --------------------------------- x 100Cations + Anions
[ 4.77 5.37 ]
= --------------------- x 100 = 5.9% (> 5%)4.77 + 5.37
Ion does not balance.
-
8/13/2019 1-Concentration Units S12
20/20
1-Concentration Units_S12.doc
Bar Diagram - Examples