1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.
-
Upload
wilfred-russell -
Category
Documents
-
view
216 -
download
1
Transcript of 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.
![Page 1: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/1.jpg)
1
Chapter 12Remote Network Access
Using Remote Connections
SLIP and PPP
WAN Technologies
![Page 2: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/2.jpg)
2
Types of Remote Network Connections
Computer to Internet service provider (ISP)
Computer to private network
Computer to computer
Network to network
![Page 3: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/3.jpg)
3
Public Switched Telephone Network (PSTN) Technical name for the standard voice
telephone system Also known as the Plain Old Telephone
Service (POTS) Analog, circuit-switched network (p.8) Works with modems to transmit data
between computers at almost any location
Typically uses copper-based, twisted-pair cable with RJ-11 jacks
![Page 4: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/4.jpg)
4
Modems
A modem (modulator/demodulator) is required to convert a computer’s digital signals to the analog signals used by the PSTN.
At the other end of the connection, another modem converts the analog signals back to digital.
![Page 5: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/5.jpg)
5
Modem Communications
![Page 6: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/6.jpg)
6
Configuring a Modem Most modems support the Plug and Play
standard.
Modems typically need an interrupt request (IRQ) and an input/output (I/O) port to communicate with the computer. For external modems, the IRQ and I/O port
are assigned to the serial port. For internal modems, you configure the
device itself to use specific hardware resources.
![Page 7: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/7.jpg)
7
Configuring a Modem Serial ports use a chip called a universal
asynchronous receiver-transmitter (UART) to manage communications. For today’s high-speed modems, you should
always use a 16550 UART.
![Page 8: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/8.jpg)
8
Virtual Private Network (VPN) Communications The remote user connects to the
Internet by using a modem to dial in to a local ISP. Instead of Dialing directly to the Network (imagine the cost!!!).
The network is permanently connected to the Internet and has a server that is configured to receive incoming VPN connections.
![Page 9: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/9.jpg)
9
Virtual Private Network (VPN) Communications The remote computer and the network
server establish a secured connection across the Internet. This technique is called tunneling, because
the connection runs across the Internet inside a secure medium.
This connection makes used of the PPTP (Point-to-Point Tunneling Protocol)
![Page 10: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/10.jpg)
10
Point-to-Point Tunneling Protocol (PPTP) Encapsulation
![Page 11: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/11.jpg)
11
Integrated Services Digital Network Integrated Services Digital Network
(ISDN) is a high-speed digital dial-up service that uses the standard PSTN infrastructure.
It is used primarily for Internet connections, but it also supports special devices such as ISDN telephones and fax machines.
![Page 12: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/12.jpg)
12
Integrated Services Digital Network The Basic Rate Interface (BRI) provides two
64-Kbps B channels and one 16-Kbps D channel.
The Primary Rate Interface (PRI) – higher grade service - provides 23 64-Kbps B channels and one 64-Kbps D channel.
For computer connections, ISDN requires a Network Terminator 1 (NT-1) and a terminal adapter.
![Page 13: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/13.jpg)
13
ISDN Connections
![Page 14: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/14.jpg)
14
DSL Service Asymmetrical service – It runs at a different upstream and downstream speed
Provides higher transmission rates by utilizing high frequencies that standard telephone services don’t use
You can use the telephone line for a DSL connection and for voice traffic at the same time
Most Common HDSL – phone companies, large corporations
ADSL – Regular users
![Page 15: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/15.jpg)
15
DSL Service Types Service Transmission Rate Link
Length Applications
High-bit-rate Digital Subscriber Line (HDSL)
1.544 Mbps full-duplex (using two wire pairs) or 2.048 Mbps full-duplex (using three wire pairs)
12,000 to 15,000 feet
Used by large networks as a substitute for T-1 leased line connections, LAN and private branch exchange (PBX) interconnections, or frame relay traffic aggregation
Symmetrical Digital Subscriber Line (SDSL)
1.544 Mbps full-duplex or 2.048 Mbps full-duplex (one wire pair)
10,000 feet Same as HDSL
Asymmetrical Digital Subscriber Line (ADSL)
1.544 to 8.448 Mbps downstream; 16 Kbps to 640 Kbps upstream
10,000 to 18,000 feet
Internet/intranet access, remote LAN access, virtual private networking, video on demand, Voice over IP
![Page 16: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/16.jpg)
16
DSL Service Types (Cont.)
Service Transmission Rate
Link Length
Applications
Rate-Adaptive Digital Subscriber Line (RADSL)
640 Kbps to 2.2 Mbps downstream; 272 Kbps to 1.088 Mbps upstream
10,000 to 18,000 feet
Same as ADSL, except that the transmission speed is dynamically adjusted to accommodate the link length and signal quality
ADSL Lite Up to 1 Mbps downstream; up to 512 Kbps upstream
18,000 feet
Internet/intranet access, remote LAN access, IP telephony, videoconferencing
Very high-bit-rate Digital Subscriber Line (VDSL)
12.96 to 51.84 Mbps downstream; 1.6 to 2.3 Mbps upstream
1000 to 4500 feet
Multimedia Internet access, high- definition television delivery
ISDN Digital Subscriber Line (IDSL)
Up to 144 Kbps full-duplex
18,000 feet
Internet/intranet access, remote LAN access, IP telephony, videoconferencing
![Page 17: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/17.jpg)
17
ADSL Connections
ADSL Termination Unit Remote or DSL Modem
DSL Access Multiplexer
![Page 18: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/18.jpg)
18
CATV Networks Broadband networks owned by cable
television companies Provide Internet access through the
same cable used for television signals Run at 512 Kbps or more Bandwidth shared with other users in
the area Asymmetrical transmissions Provide Internet connections only
![Page 19: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/19.jpg)
19
CATV Connections
![Page 20: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/20.jpg)
20
Satellite Connections
Provide Internet access only Usually downstream only Require a dial-up connection for
upstream traffic Not suitable for private network
connections
![Page 21: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/21.jpg)
21
Thin Client Computing Thin client computing is a terminal
client program running on a computer or dedicated network client device that communicates with a terminal server elsewhere on the network.
The client provides the interface to the operating system and nothing more.
The actual operating system and all applications run on the terminal server.
![Page 22: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/22.jpg)
22
Thin Client Computing Thin client computing uses a specialized
protocol, such as Independent Computing Architecture (ICA), developed by Cyrix Systems, Inc.
ICA carries keystrokes, mouse actions, and screen updates between the client and the server, so that the applications appear to be running locally.
![Page 23: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/23.jpg)
23
Remote Connection Requirements Common protocols. The two computers
to be connected must share common protocols at the data-link layer and above.
TCP/IP configuration. The Internet Protocol (IP) address and other configuration parameters must be appropriate for the network.
![Page 24: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/24.jpg)
24
Remote Connection Requirements Host and remote software.
The remote computer must run a client program that can use the physical layer to establish a connection.
The host computer must run a program that can respond to connection requests and provide network access.
Security. The host computer and the other systems on the network must have security mechanisms that control access to network resources.
![Page 25: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/25.jpg)
25
SLIP and PPP Characteristics
Open Systems Interconnection (OSI) data-link layer and TCP/IP link layer protocols
End-to-end protocols No physical layer specifications
![Page 26: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/26.jpg)
26
SLIP Stands for Serial Line Internet Protocol Simple protocol used for transmissions
over serial connections Provides no error detection, network
layer protocol identification, or security Transmits an IP datagram and follows it
with a single End Delimiter byte Rarely used today because Point-to-
Point Protocol (PPP) has replaced it
![Page 27: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/27.jpg)
27
The SLIP Frame
![Page 28: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/28.jpg)
28
PPP Stands for Point-to-Point Protocol Used for dial-up Internet connections
and other wide area network (WAN) technologies
More complex than SLIP Provides additional services that SLIP
lacks, such as IP address exchange, multiplexing of network layer protocols, and authentication
Uses a 5-byte header
![Page 29: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/29.jpg)
29
The PPP Frame
![Page 30: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/30.jpg)
30
Phases of the PPP Connection Establishment Procedure
1. Link dead2. Link establishment3. Authentication4. Link quality monitoring5. Network layer protocol configuration6. Link open7. Link termination
![Page 31: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/31.jpg)
31
WAN Characteristics WANs typically connect networks at
different locations.
WANs are point-to-point links that do not use a shared medium.
WANs can use PSTN, ISDN, or DSL connections.
![Page 32: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/32.jpg)
32
WAN Characteristics To connect local area networks (LANs) at
remote locations, you install a router at each site and connect them with a WAN link.
Most WAN connections use PPP at the data-link layer.
WAN links usually involve a third-party service provider, which often makes high-speed WANs slower than LANs.
![Page 33: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/33.jpg)
33
WAN Technologies WAN technologies
Leased lines are dedicated, permanent, point-to-point connections between two sites that are provided by telephone carriers.
Frame relay is a service that uses a cloud of virtual circuits to provide flexible amounts of bandwidth between sites.
ATM is a switched, connection-oriented service that was designed for use on both LANs and WANs.
![Page 34: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/34.jpg)
34
Leased Lines A leased line is a permanent analog or
digital telephone connection between two locations that provides a predetermined amount of bandwidth.
The most common leased line in the US is the T-1, which runs at 1.544 Mbps.
The European equivalent of a T-1 is the E-1, which runs at 2.048 Mbps.
![Page 35: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/35.jpg)
35
Leased Lines Leased line services are split into 64-
Kbps channels. You can use each channel as an individual 64-
Kbps link, or combine them into a single data pipe.
Leasing part of a T-1 (in 64-Kbps increments) is called fractional T-1 service.
A T-3 connection runs at 44.736 Mbps and an E-3 runs at 34.368 Mbps.
![Page 36: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/36.jpg)
36
Installing a Leased Line
A telephone service provider furnishes a link between two sites, running at a specific bandwidth.
Prices are based on the amount of the bandwidth and the distance spanned.
Each end of a leased line must be connected to a channel service unit/data service unit (CSU/DSU).
To use the line, you connect the CSU/DSU to your network, using a router.
![Page 37: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/37.jpg)
37
Frame Relay Frame relay provides bandwidth similar
to that of a leased line, but with greater flexibility.
Speeds range from 56 Kbps to the equivalent of a T-3.
Frame relay links are not locked into a specific speed.
![Page 38: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/38.jpg)
38
Frame Relay Each site is connected to the service
provider’s network, called a cloud.
The two sites are linked by a dynamic connection through the cloud.
Each site requires a hardware device called a frame relay assembler/disassembler (FRAD).
![Page 39: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/39.jpg)
39
ATM Stands for Asynchronous Transfer Mode
Originally designed to carry voice, data, and video traffic on both LANs and WANs
Uses fixed-length, 53-byte frames called cells
Provides a connection-oriented, full-duplex, point-to-point service between devices
![Page 40: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/40.jpg)
40
ATM Uses no broadcast transmissions
Data relayed between networks by switches, not routers
Speeds: range from a 25.6-Mbps service, intended for desktop LAN connections, to 2.46 Gbps
![Page 41: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/41.jpg)
41
Chapter Summary Using remote connections
Stand-alone computers become remote clients when they connect to a distant network by using any one of several different technologies.
PSTN connections use modems and standard telephone lines to transmit data. They are relatively slow but also flexible and universal.
VPNs are secure tunnels through the Internet that enable remote computers to communicate with their networks without using long-distance telephone connections.
SLIP and PPP SLIP is a simple protocol that enables two systems connected
through their serial ports to exchange messages with very little control overhead.
PPP is a more complicated end-to-end protocol that enables two systems to negotiate the use of optional features such as authentication protocols and multiple network layer protocols.
![Page 42: 1 Chapter 12 Remote Network Access Using Remote Connections SLIP and PPP WAN Technologies.](https://reader035.fdocuments.us/reader035/viewer/2022062714/56649d1f5503460f949f3120/html5/thumbnails/42.jpg)
42
Chapter Summary (Cont.) WAN technologies
Leased lines are dedicated, permanent, point-to-point connections between two sites that are provided by telephone carriers.
Frame relay is a service that uses a cloud of virtual circuits to provide flexible amounts of bandwidth between sites.
ATM is a switched, connection-oriented service that was designed for use on both LANs and WANs.