1

Asset Disposal Project

Rebuild Proposal For Mobile Equipment

2

Truck Regeneration

BEFORE …

AFTER……

3

Rebuild Programme

Rebuild Proposal for Mobile Equipment

- Selection of Machines identified for Rebuild Programme

- Proposal from OEMS ie., Sandvik and Atlas Copco

- Rebuild in Ireland prior to shipping

4

Machines identified for Rebuild

OEMMachine Number Machine Model Machine Type Serial Number

Rebuild Cost Vs

New Cost

Machine Value Vs

New Machine

Sandvik 292 Toro 50D Dump Truck T7050362 43% 54%

5

Truck Rebuild Example

Toro 50D Truck

• Typical cost to rebuild is from 45% to 60% of comparable new unit• Timeframe for delivery is also significantly less than typical new

unit delivery timeLeadtime on Rebuild 10/14 Weeks Depending on Rebuild/Repair

SpecLeadtime on New Machines – 27/32 Weeks depending on unit type

• Typical reduction up to 30% of cost per hour to operate and maintain following return to production after completion of rebuild programme.

6

EXAMPLE OF REBUILD

Truck Regeneration - Toro 50D Truck

Frame StructureStrip, Sandblast, Structural Inspection, Repair and Paint

CabinStrip, Sandblast, Re-upholster, Electrical Inspection, Repair and Paint

EngineReconditioned by engine OEM specialist

Powertrain and Driveline ComponentsAll components inspected and reconditioned to OEM specification

HydraulicsAll piping and hosing replaced and all valves repaired/replaced

ElectricsAll electrics built and tested to OEM specification

Quality Control and TestingMachine completed to OEM production unit standard test procedures

7

Key Benefits

KEY BENEFITS• Allows customer to retain proven technology with option to upgrade• Improved machine availability equating to lower cost per tonne• Economical second life repair• Keeps equipment in the field longer

ADDED VALUE (Examples)• Safety Rails• Emission Solutions – DPF Filter• Reverse Cameras• Warranty• Customer specific modifications• Compliance with updated legislative requirements• All OEM safety updates installed

8

Rebuild Programme

Cost Saving to Operations **Rebuilt Machine for 45% - 60% cost of New**

• Detailed Audit Inspection• Disassembly down to bare chassis• Full recondition of major components• Performance Testing• Full Repaint• Weekly inspection by Lisheen Personnel• Specialised Tooling• Fabrication • ISO 9001:2008 Quality Assurance Record• Warranty assured on delivery• Shipping organised with Operation• Commercial agreement direction between buyer and OEM• Weekly Progress Reports and Photographic Progress Log