1-800-282-8378 Power Tools - Bob Dean Supply, Inc. · PDF file1-800-282-8378 Power Tools...
Transcript of 1-800-282-8378 Power Tools - Bob Dean Supply, Inc. · PDF file1-800-282-8378 Power Tools...
1-800-282-8378
��
Power ToolsManufacturers & Vendors
Chicago PneumaticDeWaltFlorida PneumaticHiTechIngersoll RandJET ToolsL.S. StarrettMorse
Annular Cutters .........................59Magnetic Drills ..........................60Drill Press Vises .........................61Pneumatic Tools .........................62Sanders and Grinders ..................64Power Wrenches .........................65Band Saws .................................. 66Band Saw Blades .........................66Power Saws ................................ 68Electric Drills ............................. 70Power Screwdrivers ....................72Hammerdrills ............................. 72Keyway Broaches ........................73
Drills ......................................... 74Taps and Dies .............................77Tools Bits ................................... 82Nut Drivers ................................ 82Air Compressors .........................83
The Powerbor® complete cutting technology allows holes to be produced quicker and more efficiently, compared to conventional drills, and due to the cutter design, the load per tooth is greatly reduced; and the power used by the machine is kept to a minimum increasing productivity and the life expectancy of the machine.
•For cutting general engineering and structural steels•Outperforms conventional twist drills•A range of sizes from 7/16” diameter to 4” in diameter•Depth range of 1” - 3” on cutters up to 2” •Depth range of 1” - 2” depth on cutters up to 4”•Cutting Fluid always recommended to increase tool performance & longevity
The Powerbor® complete cutting technology allows holes to be produced quicker and more efficiently, compared to conventional drills, and due to the cutter design, the load per tooth is greatly reduced; and the power used by the
machine is kept to a minimum increasing productivity and the lifespan of the machine.
•The TiN coating provides better edge retention, withstands high temperatures, decreases friction, and resists corrosion•For cutting general engineering and structural steels•Can also be used on some stainless steel applications•Outperform conventional twist drills•A range of sizes from 7/16” diameter to 4” in diameter•Depth range of 1” - 3” on cutters up to 2”•Depth range of 1”- 2” depth on cutters up to 4”•Cutter design reduces load per tooth, increasing productivity, machine life•Cutting Fluid always recommended to increase tool performance & longevity
Size Depth Part No.
7/16” 1” E32001/2” 1” E3201
9/16” 1” E32025/8” 1” E3203
11/16” 1” E32043/4” 1” E3205
13/16” 1” E32067/8” 1” E3207
15/16” 1” E32081-1/16” 1” E32101-1/8” 1” E3211
1-3/16” 1” E32121-1/4” 1” E3213
1-5/16” 1” E32141-3/8” 1” E3215
1-7/16” 1” E32161-1/2” 1” E3217
Size Depth Part No.
7/16” 1” E36011/2” 1” E3602
9/16” 1” E36035/8” 1” E3604
11/14” 1” E36053/4” 1” E3606
13/16” 1” E36077/8” 1” E3608
15/16” 1” E36091” 1” E3610
1-1/16” 1” E36111-1/8” 1” E3612
1-3/16” 1” E3613
AnnularCutters
Powerbor HSS Annular Cutters Powerbor TiN HSS Annular Cutters
Size Depth Part No.
1-9/16” 1” E32181-5/8” 1” E3219
1-11/16” 1” E32201-3/4” 1” E3221
1-13/16” 1” E32221-7/8” 1” E3223
1-15/16” 1” E32242” 1” E3225
7/16” 2” E32401/2” 2” E3241
9/16” 2” E32425/8” 2” E3243
11/16” 2” E32443/4” 2” E3245
13/16” 2” E32467/8” 2” E3247
15/16” 2” E3248
Size Depth Part No.
1” 2” E32491-1/16” 2” E32501-3/16” 2” E32521-1/4” 2” E3253
1-5/16” 2” E32541-3/8” 2” E3255
1-7/16” 2” E32561-1/2” 2” E3257
1-9/16” 2” E32581-5/8” 2” E3259
1-11/16” 2” E32601-3/4” 2” E3261
1-13/16” 2” E32621-7/8” 2” E3263
1-15/16” 2” E32642” 2” E3265
Size Depth Part No.
1-1/4” 1” E36141-5/16” 1” E36151-3/8” 1” E3616
1-7/16” 1” E36171-1/2” 1” E36187/16” 2” E36201/2” 2” E3621
9/16” 2” E36225/8” 2” E3623
11/16” 2” E36243/4” 2” E3625
13/16” 2” E36267/8” 2” E3627
Size Depth Part No.
15/16” 2” E36281” 2” E3629
1-1/16” 2” E36301-1/8” 2” E3631
1-3/16” 2” E36321-1/4” 2” E3633
1-5/16” 2” E36341-3/8” 2” E3635
1-7/16” 2” E36361-1/2” 2” E3637
�0
www.bobdeansupply.comMagneticDrills
REVOLUTION Compact - Part No. H2602REVOLUTION Compact uses the latest technology to bring you a magnetic drilling system that’s big on everything but price. Constructed in the UK incorporating a powerful and durable motor, 7/16” - 1-3/8” cutter capacity, 1/2” drilling capacity and a magnetic adhesion unit of 2200lbs that’s industry proven.
REVOLUTION Compact is the top performer in the workshop or on site when you need to tackle jobs that call for lighter duty work needing quality performance you can rely on. G & J Hall Tools.
Key Product Features Include Specifications•Portable and lightweight Height : 12-1/4”•12 month comprehensive warranty Width: 4-5/8”•Dual carrying handles; reversible handle Depth: 9”•Corrosive resistant, tangle-free cable Weight: 23 lbs. •Isolating power relay for improved safety Travel: 6-1/8”•Carrying case and cutting fluid Speed: 5500 rpm (no load)•Safety guard and folding hex key set Cutter Capacity: 7/16” - 1-3/8”
Revolution Compact Electromagnetic Drill
PB450 - Part No. H2604The cutting capacity to weight ratio of the Powerbor PB450 complements the PB320 but adds more cutting power. This model is fitted with a quality tried and tested Eibenstock 2 speed motor, has all Powerbor standard features and is backed by a full range of replacement spares ready from stock.
•12 month comprehensive warranty•Protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set.•Improved high density magnet for maximum adhesion•Reversible handles for use in restrictive conditions•Corrosive resistant, tangle-free cable from stand to drill •Control panel on the same side as the traverse handles•Isolating power relay for improved safety handling•Dual carrying handles for enhanced operating maneuverability
SpecificationsHeight: 14-1/2”Width: 4-1/2”Depth: 11”Travel: 8”Weight: 44 lbs.Total Power: 1200 wattMagnetic Adhesion: 3300 lbs.Voltage: 110V or 220/240VSpeed: 250 rpm /450 rpmCutter Capacity: 7/16” to 1-3/4”Drilling Capacity: 13/16”More Taper: No. 2
PB450 Electromagnetic Drill
PB320 - Part No. H2603The Powerbor® PB350 has been ergonomically designed to provide an electromagnetic drilling machine that is totally user friendly. The incredible power to weight ratio is such that the PB320 is considered by many to be the most versatile and durable machine of its type in the world today, and incorporated the following value-added features:
•Fitted with the reliable Hitachi D13 680 watt power unit.•Free 1/2” drill chuck.•12 month comprehensive warranty•Protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set.•Improved high density magnet for maximum adhesion•Reversible handles for use in restrictive conditions•Corrosive resistant, tangle-free cable from stand to drill •Control panel on the same side as the traverse handles•Isolating power relay for improved safety handling•Dual carrying handles for enhanced operating maneuverability
SpecificationsHeight: 11-7/8”Width: 3-1/2”Depth: 9-1/2”Travel: 6-1/2”Weight: 27.5 lbs.Total Power: 730 wattMagnetic Adhesion: 2200 lbs.Voltage: 110V or 220/240VSpeed: 550 rpmCutter Capacity: 7/16” - 1-3/8”Drilling Capacity: 3/4”
PB320 Electromagentic Drill
1-800-282-8378
��
MagneticDrills
PB1000E Electromagnetic Drill
PB700 - Part No. H2606Carefully designed to guarantee enhanced power and versataility. A proven, powerful performer that is still portable enough to be used on-site or in the workshop, the PB700 provides the perfect solution to even the most difficult of drilling applications. It incorporates a reversible variable speed motor as standard, allowing it to be readily used for tapping applications.
•Electro-torque control•Soft start motor• Infinitely variable speed•Forward and reverse facility•Thermal overload protection•Eibenstock 1800 watt motor unit•Available option includes complete external coolant system•12 month comprehensive warranty•Protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set•Improved high density magnet for maximum adhesion•Reversible handles for use in restrictive conditions•Corrosive resistant, tangle-free cable from stand to drill •Control panel on the same side as the traverse handles•Isolating power relay for improved safety handling•Dual carrying handles for enhanced operating maneuverability
SpecificationsHeight: 17-1/2”Width: 4-1/4”Depth: 13”Travel: 8”Weight: 48 lbs.Total Power: 1850 wattMagnetic Adhesion: 3300 lbs.Voltage: 110V or 220/240VSpeed: 60/140 rpm 200/470 rpmCutter Capacity: 7/16” to 2-3/4”Drilling Capacity: 1-1/4”More Taper: No. 3
PB700 Electromagnetic Drill
PB1000E - Part No. H2607Truly putting the power into Powerbor, the PB1000E challenges all other machines in terms of power and reliability. Its base and body design achieves greatly enhanced rigidity and cutting capacity. The arbor design allows rapid cutter to twist drill change. The swivel base option is a customer-led development providing convenience and practicality and allowing precise positioning of the cutter with movement through 260° and a lateral movement of 7/8”.
•Fitted with Eibenstock 1100 watt motor unit•Available option includes a complete external coolant system and forward and reverse capability•12 month comprehensive warranty•Protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set•Improved high density magnet for maximum adhesion•Reversible handles for use in restrictive conditions•Corrosive resistant, tangle-free cable from stand to drill •Control panel on the same side as the traverse handles•Isolating power relay for improved safety handling•Dual carrying handles for enhanced operating maneuverability
SpecificationsHeight: 18-7/8”Width: 4-1/4”Depth: 12-1/2”Weight: 55 lbs.Total Power: 1100 wattMagnetic Adhesion: 4400 lbs.Voltage: 110V or 220/240VSpeed: 220, 260, 350, 420 rpmCutter Capacity: 7/16” to 4”Drilling Capacity: 1-1/4”More Taper: No. 3
Drill PressVises
Center Slide Bar Type Drill Press Vises
•The axial sleeve and movable jaw are cast in one single piece•.002” tolerance between the axial sleeve and center bar•The manner in which the center slide bar is connected to the axial sleeve assures an even 360° contact•More accurate and stable than the traditional screw and cross plate means of attaching the movable jaw to the vise bed
Model No. Jaw (W x D) Jaw Opening Base Height Part No.
DPV-3BT 3” x 1” 2-13/16” 5-1/2” x 6-1/47” 2-3/16” -DPV-4BT 4” x 1-1/8” 3-1/2” 6-9/16” x 7” 2-3/8” -DPV-5BT 5” x 1-1/4” 4-5/16” 7-1/2” x 8-1/4” 2-5/8” -DPV-6BT 6” x 1-3/8” 5-1/2” 9” x 9-13/16” 3” U0009
Drill Press Angle Vises
•Adjusts quickly to a full 90° vertical or horizontal position•High tensile iron casting is strong and heavy•2 bolt slots on base provide easy positioning on table
Model No. Jaw (W x D) Jaw Opening Base Height Part No.
DPAV-3 2-1/2” x 1-1/2” 2-5/8” 3-5/16” x 8-1/4” 3-1/8” U0002DPAV-4 3-1/2” x 1-1/2” 3-3/16” 4-1/2” x 9-5/32” 3-1/2” U0006DPAV-5 4-1/2” x 1-1/2” 4” 5-1/2” x 11-1/4” 3-5/8” U0008
��
www.bobdeansupply.comPneumaticTools
CP721 Impact Wrench - Part No. H1850General duty for maintenance/repair. Features a rocking dog clutch, friction ring socket retainer, a built-in power regulator and an ergonomic handle. Great for soft joints and compact for easy access. Chicago Pneumatic.
SpecificationsSquare Drive: 3/8”Torque Max: 90 ft lbTorque Working: 5 - 50 ft lb Clutch Type: Rocking Dog Socket Retainer: Friction Ring Length: 5.75”Weight: 2.6 lbsAir Flow: 10 cfm Air Inlet: 1/4” NPTFAir Hose Bore: 3/8”Sound Level: 84 dB(A)Sound Power: 95 dB(A)Vibration Level: 4.9 m/s²
CP721 3/8” Impact Wrench CP726H 1/2” Impact Wrench
CP734H 1/2” Impact Wrench
CP726H Impact Wrench - Part No. H1853Small and compact for easy maneuverability and true one-hand operation. Features a DynaPact clutch, through handle air exhaust, built in power regulator and friction ring socket retainer. Chicago Pneumatic.
SpecificationsSquare Drive: 1/2”Socket Retainer: Friction Ring Clutch Type: Dyna PactTorque Working: 20 - 160 ft lbTorque Max: 200 ft lbLength: 6.0”Weight: 3.1 lbsAir Flow: 12 cfmAir Inlet: 1/4” NPTFAir Hose Bore: 3/8”Sound Level: 94 dB(A)Sound Power: 105 dB(A)Vibration Level: <2.5 m/s²
CP734H Impact Wrench - Part No. H1852Standard duty for use in a variety of fastening operations. Features a DynaPact clutch, through handle air exhaust, built in power regulator and friction ring socket retainer. Chicago Pneumatic.
SpecificationsSquare Drive: 1/2”Socket Retainer: Friction Ring Clutch Type: Dyna PactTorque Working: 25 - 310 ft lbTorque Max: 425 ft lbAir Flow: 15 cfm Air Inlet: 1/4” NPTF Air Hose Bore: 3/8” Length: 7.5”Weight: 5.1 lbsSound Level: 94 dB(A)Sound Power: 105 dB(A)Vibration Level: <2.5 m/s²
CP9561 3/4” Impact Wrench
CP772H 3/4” Impact Wrench
CP772H Impact Wrench - Part No. H1868High ultimate torque for tough applications; ideal for hard pull up conditions. Features push-through reverse mechanism, built-in air regulator, teasing throttle and oil bath clutch chamber.
SpecificationsSquare Drive: 3/4”Socket Retainer: Friction Ring Clutch Type: Pin Torque Max: 1000 ft lbTorque Working: 150 - 700 ft lbLength: 9-5/8”Weight: 10.5 lbsAir Flow: 32 cfmAir Inlet: 3/8” NPTFAir Hose Bore: 3/8”Sound Level: 95 dB(A)Vibration Level: 4.0 m/s²
CP9561 Impact Wrench - Part No. H1854Standard-duty for hard pull up applications. Features pin clutch, rugged 3 piece construction, an integral speed regulator and an oil bath clutch chamber.Chicago Pneumatic.
SpecificationsSquare Drive: 3/4”Clutch Type: Pin Torque Working: 75 - 500 ft lbTorque Max: 750 ft lbLength: 8-1/2”Weight: 10.5 lbsSocket Retainer: Hole for socket pinAir Flow: 30 cfmAir Inlet: 1/4” NPTFSound Level: 100 dB(A)Vibration Level: 5.1 m/s²
CP797 1” Impact Wrench
CP797 Impact Wrench - Part No. H1858Standard-duty for use in steel erection, heavy assembly/disassembly, maintenance/repair, and construction. Features a 6” extended shank, teasing throttle, removeable support handle and closed-grip inside trigger. Chicago Pneumatic.
SpecificationsSquare Drive: 1” Air Flow: 48 cfmSocket Retainer: Hole for socket pin Air Inlet: 1/2” NPTFClutch Type: Pin Air Hose Bore: 1/2” minTorque Working: 110 - 800 ft lb Sound Level: 102 dB(A)Torque Max: 1100 ft lb Vibration Level: 4.3 m/s²Length: 15-1/2” Weight: 27 lbs
1-800-282-8378
��
CP0456 Lesar Weld Flux Chipper - Part No. H1829 Pneumatic weld flux chipping hammer with lever type handle.
SpecificationsBlows Per Minute: 4300 Bore: 0.93” Stroke: 1.0” Chisel Retainer: “WF” 1/2” Qtr. OctLength: 8.6” Weight: 3.5 lbsAir Inlet: 1/4 NPT Sound Level: 95 dB(A)
PneumaticTools
CP711 Utility Hammer - Part No. H1844For light- to medium-duty chipping, trimming, riveting, cutting, piercing and peening jobs. Features light weight design, 2-1/2” stroke, piston air-cushioned on return stroke and zip-quick retainer.
SpecificationsCapacity Cold Rivets: 1/4” Dural; 3/16” Steel Bore &Stroke: 3/4” x 2-1/2”Length: 6-3/4”Weight: 3-1/2 lbs.Blows Per Minute: 3300Rivet Set & Chisel Shank: .401 Type 1Minimum Hose Size: 3/8”Air Flow: 16 CFMAir Inlet: 1/4” NPTFSound Level: 105 dB(A)Vibration Level: 7.6 m/s²Spindle Thread &Projection: M10 x 1.25
CP711 Utility Hammer
CP828 Ratchet with 3/8” Capacity - Part No. H1865For light assembly including electrical, electronics, appliance, light truck and tractor manufacturing. Fast-change 3/8” square drive sprindle with pin retainer. Improved ratchet head and reverse button. Can be used as a hand ratchet wrench for final torque-up or to break fastener loose.
SpecificationsSquare Drive: 3/8” RPM: 150 Torque Range: 10 - 50 ft.-lb. Sound Level: 92 dB(A)Air Flow: 16 CFM Air Inlet: 1/4” NPTF Length: 10” Weight: 2-5/8 lbs.Head Dimensions: 1-3/16” Ht. to Rear of Socket; 25/32” Side to Center.
CP785 Nonreversible 3/8” Capacity Drill - Part No. H1863For maintenance and general use. Poweful 1/2 hp energy efficient air motor resists stalls. Triple idler planetary gearing for smooth operation and extended tool life. Handle exhaust reduces noise and directs air away from work area. Ideal for accessory and air condition installation, engine work and auto body repair.
SpecificationsChuck Size: 3/8”Spindle Thread: 3/8”-24Free Speed RPM: 2400Average Air Consumption: 4.13 CFMAir Inlet: 1/4” NPTFSound Level: 90 dB(A)Vibration Level: 2.5 m/s²Minimum Hose Size: 3/8”Length: 7”Weight: 2-1/4 lbs
CP828 Ratchet with 3/8” Capacity
CP785 Non-Reversible 3/8” Drill
CP860 Die Grinder - Part No. H1866For die contouring and repair, weld cleaning, casting and forging cleanup, deburring, blending, and smoothing. Features 1/2 hp motor, square handle design, speed regulator, lock-off throttle and rear exhaust.
SpecificationsCollet Size: 1/4” Free Speed RPM: 24000Length: 5-3/4”Weight: 1-1/4 lbsMinimum Hose Size: 3/8”Air Flow: 20 cfmAir Inlet: 1/4” NPTFSound Level: 90 dB(A)Vibration Level: 3.0 m/s²Spindle Thread and Projection: M10 x 1.25
CP860 Die Grinder
CP857 Angle Grinder - Part No. H1896Use with 7” type 27 grinding wheels for cleaning, deburring, blending and smoothing. Features 0.6 hp motor, aluminum alloy housing, spiral bevel gearing in angle head and removeable dead handle.
SpecificationsWheel Size: 7”Spindle Thread: 5/8”-11 Free Speed RPM: 7500Height to Face: 3-3/4”Length: 13-1/8”Weight: 6-1/4 lbsMin. Hose Size: 3/8”Air Flow: 33 cfmAir Inlet: 3/8” NPTFSound Level: 93 dB(A)Vibration Level: 4.2 m/s²
CP857 Angle Grinder
Lesar Weld Flux Chipping Hammer
��
www.bobdeansupply.comPneumaticTools
CP9356 Weld Flux Chipper
CP9356 Weld Flux Chipper - Part No. H1845For medium-duty weld flux removal and other chipping applications in fabrication shops, foundries, refineries and construction. Is easily converted to needle scaler with the addition of needle scaler attachment P-136983. Features a simple plate valve design for smooth throttling, easy-release retainer for quick chisel changing and a heat-treated piston, cylinder sleeve and chisel bushing for long life.
SpecificationsType of Handle: Lever Bore &Stroke: 1” - 1-1/8”Length:9-3/8”Weight: 3-3/4 lbs.Blows Per Minute: 4600Air Flow: 15 CFMSound Level: 101 dB(A)Vibration Level: 16.7 m/s²
CP864 Random Orbital Sander - Part No. H1821Use the orbital motion for fine finishing and the rotary motion for rapid material removal. Features a balanced counterweight design and cross-bolt-style hub mounting. Built in speed regulator and heavy-duty ball bearing construction.
SpecificationsPaper Size: 6”Spindle Thread: 5/16”-24Free Speed RPM: 10000Air FLow: 20 CFMSound Level: 86 dB(A)Vibration: < 2.5 m/s²Height: 3-1/2”Weight: 4 lbs.
D28110 Small Angle Grinder - Part No. H1437•7.0 Amp AC/DC, 11,000 rpm motor designed for faster material removal and higher overload protection•Quick-change wheel release provides easier and quicker wheel removal without the need for a wrench•5/8”-11 spindle thread accepts a wide range of accessories•Low profile jam-pot gear case for tight spaces•Oversized, protected spindle lock button•2-position removable side handle
CP864 Random Orbital Sander
D28110 4-1/2” Small Angle Grinder
Sanders & Grinders
D28402 Small Angle Grinder - Part No. H1418•10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection•Dust Ejection System™ provides durability by ejecting dust particles that enter the tool through the air intake vents•Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces•Quick-change wheel release provides easier and quicker wheel removal without the need for a wrench•Keyless adjustable guard•Vibration reducing removable side handle provides user comfort and reduces user felt vibration•Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage•Paddle switch lock-off for protection from accidental starts•Matching wheel flanges for the use of common accessories
SpecificationsAmps: 10.0 AC/DC AmpsMax Watts Out: 1,200 WTool Weight: 4.6 lbs.Spindle Lock: YesSpindle Thread: 5/8”-11No Load Speed: 11000 rpm Includes: 2-position side handle, keyless adjustable guard, and wrench
D28494S Large Angle Grinder - Part No. H1426•High power 4 HP (maximum motor HP) 6,000 rpm motor with overload protection provides higher operating speeds under load•Epoxy coated field and armature provide long service life against abrasion from airborne debris•Keyless adjustable guard for adjustments without tools•Low profile gearcase allows for work in tight areas•Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage•5 position side handle provides improved ergonomics•2 wire double insulated ‘S’ jacket rubber cord provides increased durability and life in hot and cold climates•6,000 rpm speed for versatility in a variety of applications•Lightweight for extended use applications
SpecificationsAmps: 15.0 AC/DC AmpsMax Watts Out: 3,084 WNo Load Speed: 6,000 rpmSpindle Lock: YesSpindle Thread: 5/8”-11Tool Weight: 13.15 lbs.Tool Length: 19.2”Motor Abrasion Protection: YesSteel-Cut Gears: YesIncludes: 7” guard and 5 position side handle
D28494S 7” Large Angle GrinderD28402 4-1/2” Small Angle Grinder
SpecificationsAmps: 7.0 AC/DC AmpsMax Watts Out: 800 WNo Load Speed: 11,000 rpmSpindle Lock: YesSpindle Thread: 5/8”-11Tool Weight: 4.1 lbs.Use Wheels Above: 12,000 rpmIncludes: 2-position side handle, depressed center wheel, adjustable guard, and wrench
1-800-282-8378
��
Sanders &Grinders
DW756 Bench Grinder - Part No. H1425•Powerful 5/8 HP induction motor for heavy-duty grinding •Industrial cast iron base and motor housing provide durability, prolong life•Motor runs at 3,450 rpm for high speed material removal•Precision-machined aluminum tool rests allows accurate positioning of work•Rear exhaust ports in wheel guards for smoother operation•12-1/2” between wheels for longer & larger applications
SpecificationsAmps: 4.0 AC Amps Horsepower: 5/8 HPNo Load Speed: 3,450 rpm Wheel Diameter: 6”Spindle Diameter: 1/2” Adjustable Tool Resets: YesTool Length: 15” Tool Weight: 28.5 lbs.Includes: 36 grit wheel, 60 grit wheel, eye shields, spark deflectors, tool rests and adjusting wrench
DW756 6” Bench Grinder DW758 8” Bench Grinder
DW758 Bench Grinder - Part No. H1423•3/4 HP induction motor for industrial grinding applications•Rugged cast iron base and motor housing provide durability, prolonged life•Motor runs at 3,600 rpm for high speed material removal•Precision-machined aluminum tool rests allows accurate positioning of work•Rear exhaust ports in wheel guards for smoother operation•12-1/2” between wheels for larger& longer applications
SpecificationsAmps: 4.2 AC Amps Horsepower:3/4 HPNo Load Speed: 3,600 rpm Wheel Diameter: 8”Spindle Diameter: 5/8” Adjustable Tool Resets: YesTool Length: 16” Tool Weight: 39.5 lbs.Includes: 36 grit wheel, 60 grit wheel, eye shields, spark deflectors, tool restsand adjusting wrench
PowerWrenches
DW292 Impact Wrench - Part No. H1431•345 ft-lbs of deliverable torque in forward and reverse•1/2” detent pin anvil•AC/DC forward/reverse rocking switch•Soft grip handle for superior ergonomics•Ball bearing construction for durability
SpecificationsAmps: 7.5 AmpsNo Load Speed: 2,100 rpmMax Torque: 345 ft-lbs.Impacts Per Minute: 2,700 bpmTool Length: 11-1/4”Tool Weight: 7.0 lbs.
DW294 Impact Wrench - Part No. H1408•345 ft-lbs of deliverable torque in forward and reverse•3/4” detent pin anvil•AC/DC forward/reverse rocking switch•Soft grip handle for superior ergonomics•Ball bearing construction for durability
SpecificationsAmps: 7.5 AmpsNo Load Speed: 2,100 rpmMax Torque: 345 ft-lbs.Impacts Per Minute: 2,700 bpmTool Length: 11-1/4”Tool Weight: 7.0 lbs.
DW292 1/2” Electric Impact Wrench DW294 3/4” Electric Impact Wrench
DW297 Impact Wrench - Part No. H1303•High torque level for heavy-duty fastening applications - 434 ft. lbs.•Ball bearing construction for durability•Easy forward & reverse •Can run on AC or DC current•Externally replaceable brushes
SpecificationsAmps: 10.0 AmpsNo Load Speed: 1,600 rpmMax Torque: 434 ft-lbs.Impacts Per Minute: 1,800 bpmTool Length: 13”Tool Weight: 11.0 lbs.Includes: 360° Side Handle
DW297 3/4” Electric Impact Wrench
��
www.bobdeansupply.comBandSaws
7” x 12” Horizontal / Vertical Bandsaw
HVBS-7MW Bandsaw - Part No.K0359•Roller cabinet with built-in chip tray•Hydraulic downfeed for ease of cut•Hardened and ground worm gear•Automatic shut-off after cut•UL Listed motor•Heavy cast iron bow and bed•Model No. HVBS-7MW•Jet Tool
SpecificationsRound at 90°: 7” Round at 45°: 4-1/2”Rectangle at 90°: 7” x 8-1/2” Rectangle at 45°: 7” x 5”Throat Depth: 7” Vertical Worktable: 9-3/8” x 10”Vise Swivels: 45°Blade Size: 3/4” x .035 x 93”Blade Wheel Diameter: 11-3/4”Blade Speeds: 80, 130, 180, 285 SFPMBed Height: 23”Motor: 3/4 HP, 115/230V, 1Ph, Prewired 115VFloor Space Required: 20-1/2” x 49-1/2” x 38”Net Weight: 318 lbs.Includes: Vertical worktable, coolant system, 3/4” Bi-metal blade, adjustable materials stop and chip brush
DW368 Lightweight Circular Saw - Part No. H1388•Rubber bumpers protect guards from jobsite abuse•Lightweight and well-balanced design allows for more accurate cuts•Innovative sight light makes the cut line visible in any environment•4-3/4” deep cut capacity for round or rectangular stock•Dual bearing blade guide rollers •Durable and adjustable material guide •Large front handle allows for more hand space and control•Ergonomic soft grip back handle provides comfort during use•Externally replacable brushes allow for quick repairs on the jobsite•Speed control knob to tailor the blade speed for various applications•Integrated hang hook allows user to hang the saw without damaging front handle or castings
Standard Equipment Includes: Hex wrench, standard 44-7/8” x 1/2” x .020” blade and heavy-duty kit box.
Deep Cut Variable Speed Bandsaw
SpecificationsAmps: 6.0 ampsFt/Min.: 82 - 280’Tool Length: 21.0”Tool Weight: 15.0 lbs.Capacity (Rect.): 4-3/4”Capacity (Round):4-3/4”
5” x 6” Horizontal / Vertical Bandsaw
HVBS-56M Bandsaw - Part No.K0362•UL Listed single phase motor•Exclusive design heavy-duty 14-gauge stand•Large diameter wheels and built-in handle allows easy movement•Front legs feature adjustable leveling pads•Ball bearing supported blade wheel•Fully adjustable ball bearing blade guides•Heat treated and ground steel worm gear with bronze drive gear•Three blade speeds to choose from•Automatic shut-off after cut•Model No. HVBS-56M•Jet Tool
SpecificationsRound at 90°: 5” Round at 45°: 3”Rectangle at 90°: 5” x 6” Rectangle at 45°: 5” x 3”Throat Depth: 6” Vertical Worktable: 9-5/8” x 9-1/2”Vise Swivels: 45°Blade Size: 1/2” x .025 x 64-1/2”Blade Speeds: 80, 120, 200 SFPMBlade Wheel Diameter: 7-3/8”Bed Height: 25-1/2”Motor: 1/2 HP, 115/230V, 1Ph, Prewired 115VFloor Space Required: 19” x 44” x 57” (Vertical)Net Weight: 115 lbs.Standard Equipment Includes: Vertical worktable, 1/2” Carbon steel blade, and adjustable material stop
Band SawBlades
Blades for Portable Band Saws (Port-A-Band)
Blades for portable band saw machines. Five Starrett blade types are offered to improve the usage of these handy tools:Bi-Metal Unique - HSS teeth contain 8% cobalt. Provides 170% more weld contact area to significantly reduce fracture & breakage.Powerband M-42 - This is an ideal bi-metal band saw blade for production cutting of abrasive exotic alloys, tool steels and stainless steels.Premium - High carbon steel blade. Greater band tension & blade rigidity increase cutting rates and provide more accurate cuts of low alloy, non-ferrous metal.Flex-Back - These blades combine good, general purpose cutting with low cost - a good value.Carbide Grit - These band saw blades will easily cut through most hard and abrasive materials.
Part No. E9640 - 3’ 8-7/8” Bi-Metal Unique Blade with 14S Pitch & RakePart No. E9645 - 3’ 8-7/8” Bi-Metal Unique Blade with 18W Pitch & RakePart No. E9651 - 3’ 8-7/8” Powerband M-42 Bi-Metal Blade with 10-14S Pitch & Rake
1-800-282-8378
��
This high carbon steel band has precisely hardened teeth, coupled with a hard, tough spring-tempered back, resulting in a high tensile strength. Greater band tension and improved blade rigidity increases cutting rates and provides more accurate cuts. Applications are light to medium vertical and horizontal machines, toolroom and maintenance, low alloy, nonferrous metals Manufactured by L.S. Starrett.
RAKEChoose the rake based on the material/shape to be cut
SHAPERegular - Conventional tooth for general purpose sawing, zero rake.
Hook - 10° positive rake for fast cutting of non-ferrous metals and non-metallics.
Skip - Zero rake, widely spaced teeth,shallow gullets for cutting large sections.
Band SawBlades
Premium Hard-Back Band Saw Blades
Width x Thickness Tooth Shape Pitch & Rake Size Part No.
1/4” x .025 Regular 14S 7’ 9” E96211/2” x .025 Regular 10W 5’ 2-1/2” E96251/2” x .025 Regular 14S 5’ 4-1/2” E96261/2” x .025 Regular 14W 5’ 4-1/2” E96271/2” x .025 Regular 18W 5’ 4-1/2” E96283/4” x .032 Regular 10S 7’ 9” E96293/4” x .032 Regular 14W 10’ 5” E96193/4” x .032 Regular 14S 7’ 9” E96313/4” x .032 Regular 14W 9’ 7” E96323/4” x .032 Regular 14W 9’ 7-1/2” E96303/4” x .032 Regular 14S 9’ 7-1/2” E96333/4” x .032 Regular 14S 10’ 5” E96343/4” x .032 Regular 10S 11’ 6” E96353/4” x .032 Regular 10W 11’ 6” E96363/4” x .032 Regular 14S 11’ 6” E96373/4” x .032 Regular 14W 11’ 6” E9638
1” x .035 Regular 10S 9’ 7” E9639
The ulitmate bi-metal competitor, Gladiator delivers the utmost in sawing performance and cost effectiveness across a wide range of applications. Features: Electron beam welded bi-metal construction; Unique tooth design features triple-tempered M-2 Cobalt high speed steel teeth; Up to 12° positive rake angle; Fatigue resistant alloy steel backing. Benefits: Higher wear/heat resistance; Easy penetration, excellent chip clearance, reduced noise levels; Improved surface finish; Faster, straighter cuts. Applications: High production cutting; Full range of steels, from mild to stainless, up to 42 HRC; Nickel based and non-ferrous alloys. Manufactured by L.S. Starrett.
RAKEChoose the rake based on the material/shape to be cut
SHAPEGladiator™- Large teeth, up to 12° positive rake angle, for optimum production cutting of steels up to 42 HRC, stainless, nickel based and non-ferrous alloys.
PITCHVariable - Reduces noise levels and vibration; cuts structurals, tubing and solids smoothly, quickly .
Gladiator™ Band Saw Blades
Width x Thickness Tooth Shape Pitch & Rake Size Part No.
1/2” x Gladiator™ 10-14/P 5’ 4-1/2” E95251/2” x Gladiator™ 14/P 5’ 4-1/2” E95261/2” x Gladiator™ 6-10/P 5’ 4-1/2” E9527
3/4” x .035 Gladiator™ 10-14/P 9’ 7-1/2” E95323/4” x .035 Gladiator™ 14/P 10’ E95293/4” x .035 Gladiator™ 14/P 10’ 10-1/2 E95303/4” x .035 Gladiator™ 6-10/P 10’ 5” E95333/4” x .035 Gladiator™ 10-14/P 10’ 5” E95343/4” x .035 Gladiator™ 6-10/P 11’ 6” E95353/4” x .035 Gladiator™ 10-14/P 11’ 6” E95363/4” x .035 Gladiator™ 10-14/P 11’ 6” E95373/4” x .035 Gladiator™ 10-14/P 11’ 9” E9538
Width x Thickness Tooth Shape Pitch & Rake Part No.
3/8” x .025 Regular 14S E99451/2” x .025 Hook 6P-HP E99471/2” x .025 Regular 10S E99511/2” x .025 Regular 14W E99501/2” x .025 Regular 14S E99541/2” x .025 Regular 24W E99533/4” x .032 Regular 10S E99593/4” x .032 Regular 14W E99603/4” x .032 Regular 14S E9967
1” x .035 Regular 14S E9970
Stocked Hard-Back Welded-To-Size
P=Positive Rake S=Straight (zero) Rake W=Wavy Set, Zero RakeHP=High Profile Teeth LP=Low Profile Teeth K=Skip
Stocked Sizes
Stocked Sizes
Width x Thickness Tooth Shape Pitch & Rake Part No.
1/2” Gladiator™ 6-10/P E99731/2” Gladiator™ 10-14/P E9975
3/4” x .035 Gladiator™ 6-10/P E99773/4” x .035 Gladiator™ 8-12/P E99693/4” x .035 Gladiator™ 10-14/P E99783/4” x .035 Gladiator™ 14/P E9976
1” x .035 Gladiator™ 6-10/P E99791” x .035 Gladiator™ 10-14/P E9981
Stocked Hard-Back Welded-To-Size
��
www.bobdeansupply.comPowerSaws
DW715 Single-Bevel Compound Mitre Saw
DW715 Compound Mitre Saw - Part No. H1387•15 Amp motor, 4,000 rpm delivers extended power and durability•Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting•Exclusive Precise Miter System and Machined Base Fence Support deliver optimizes cutting accuracy•Tall sliding fence supports crown molding up to 5-1/4” nested and base molding up to 6-1/2” vertically against the fence while easily sliding out of the way for bevel cuts•Cam lock miter handle with miter detent override deliver quick and accurate miter angles•Designed for use with the DW7187 DEWALT adjustable miter saw laser system delivers visibility to the cutting path•4 Hardened Steel Bevel Stops at 0°, 33.9°, 45° and 48° delivers versatility at most common bevel angles•Bevels 0°-48° to the left and 0°-3° to the right for increased capacity•0°-50° left and right miter capacity for greater versatility
SpecificationsAmps: 15.0 AmpsNo Load Speed: 4,000 rpmBlade Diameter: 12”Arbor Size: 5/8” or 1”Vertical Capacity: Baseboard Against Fence 6-1/2”Vertical Capacity: Crown Molding Vertically Nested 5-1/4”Horizontal Capacity: Baseboard Lying Flat 8”Horizontal Capacity: Crown Molding Lying Flat 6-1/2”45 Bevel Cut Capacity (dimensional lumber): 2 x 890 Cross-Cut Capacity (dimensional lumber): 4 x 690 Cross-Cut Capacity (max width): 2” x 8”45 Mitre Cut Capacity (max height): 4 x 4 dimensional lumber45 Mitre Cut Capacity (max width): 2 x 6 dimensional lumberTool Weight: 42 lbs.Includes: Carbide blade, extension kit, dust bag and blade wrench
EVO180 7” Circular Saw - Part No. H16347” Circular Saw with 2” cutting reach, incredible cutting ability and represents outstanding value for money.
SpecificationsSize: 7 inch diameter bladesArbor: 20mmAmps: 12Watts: 1200, 100V, 50-60HzRPM: 3500Weight: 14.4. lbs.Dimensions: 9”H x 16” W x 10-1/2”DMaximum Cutting Reach: 2 inchesOptimum Thickness of Cut: 1/4 inch (mild steel)Model No.: Wolf 180V2Materials: Steel, sheet metal, aluminum, stainless steel, wood (different blades required for different materials)Standard Equipment Includes: Carry case, overload switch, spindle lock for easy blade changed, metal chip collecting cover, retracting blade guard, side handle, length adjuster, 6mm Hex key, safety goggles and ear plugsAll blades sold seperately
EVO230-HDX 9” Circular Saw - Part No. H16279” Circular Saw with 3-1/4” cutting reach. brand new heavy duty model, the toughest steel cutting Circular saw. Features laser guide and 0-45 bevel tilt.
SpecificationsSize: 9 inch diameter bladesWeight: 19.75. lbs.Arbor: 1 inchAmps: 15Watts: 1750. 110V, 50-60HzRPM: 2700Dimensions: 12-1/2”H x 17” W x 12-1/2”DMaximum Cutting Reach: 3-1/4 inchesOptimum Thickness of Cut: 1/2 inch (mild steel)Model No.: EVO230-HDXMaterials: Steel, sheet metal, aluminum, stainless steel, wood (different blades required for different materials)Standard Equipment Includes: Carry case, laser guide, overload switch, 1 collecting cover, retracting blade guard, side handle, length adjuster, safety goggles and ear plugsAll blades sold seperately
EVO180 7” Steel Cutting Circular Saw EVO230-HDX 9” Circular Saw
Raptor 355 14” Chop Saw - Part No. H162214” Chop Saw. A combination of power, accuracy and unbelievable TCT cutting ability equates to the ultimate steel cutting chop saw.
SpecificationsSize: 14 inch diameter blades Weight: 50 lbs. Dimensions: 22” x 22” x 12-3/4” Arbor: 1 inchAmps: 15 Watts: 2200, 100V, 50-60Hz RPM: 1300 Bevel Cut: 0 - 45°Optimum Thickness of Cut: 1/2 inch (mild steel)Materials: Steel, sheet metal, aluminum, stainless steel (different blades required for different materials)Dimensional Limits: 5-1/8” round, 4-3/4” square and 4-3/4” x 7-1/4” rectangleStandard Equipment Includes: Cast iron vise with 0-45 swivel action, collection tray for metal chippings, safety guard, 1 x vise V-plate, 8mm Hex wrench, 6mm Hex wrench and safety goggles. All blades sold seperately.
Raptor 355 14” Steel Cutting Chop Saw
1-800-282-8378
��
PowerSaws
The ultimate in quality and durability, Evolution blades are designed for Evolution Steel cutting saws, but can also be fitted to other brands.
Diameter Teeth Bore Application Blade Color Part No.
7” 36T 20mm Steel Blue H16367” 68T 20mm Thin Steel Blue -7” 54T 20mm Aluminum Green H16407” 48T 20mm Stainless Yellow H16389” 48T 1” Steel Blue H16379” 80T 1” Aluminum Green H16429” 60T 1” Stainless Yellow H16399” 30T 1” Aluminum Green -
14” 66T 1” Steel Blue H140214” 90T 1” Thin Steel Blue -14” 80T 1” Aluminum Green H149714” 90T 1” Stainless Yellow H1646
Evolution TCT Saw Blades
DW368 Lightweight Circular Saw - Part No. H1388•Lightweight tool designed to reduce user fatigue & increase productivity•56°beveling capacity with stops at 45°& 22.5°for aggressive bevel cuts while locating angles quickly•Magnesium show designed for increased durability•Clear line of sight aids in blade visibility from any angle•Lower guard design for performance when making bevel cuts & cutting shims
SpecificationsAmps: 15.0 AmpsMax Watts Out: 2,200 WNo Load Speed: 5,800 rpmBevel Capacity: 56°Bevel Stops: 45° and 22.5°Rear Pivot: N/AElectric Brake: N/ABlade Diameter: 7-1/4”Depth of Cut at 90°: 2-3/8”Depth of Cut at 45°: 1-3/4”Tool Weight: 9.5 lbs.Includes: Carbide tipped blade and blade wrench
DW304PK Reciprocating Saw Kit - Part No. H1397•4 position blade clamp allows for flush cutting & versatility•Powerful 10 Amp motor for heavy-duty applications•Lever-action keyless blade clamp for easy blade changing•0-2,800 strokes per minute and 1-1/8” stroke length •Variable speed trigger provides improved control
SpecificationsAmps: 10.0 AmpsStrokes/Minute: 1-2,800 spmStroke Length: 1-1/8”Keyless Blade Clamp: Lever4 Position Blade Clamp: YesAdjustable Shoe: FixedVariable Speed Trigger: YesVariable Speed Dial: NoOrbital Action: NoAnti Slip Comfort Grip: NoTool Length: 17-1/2”Tool Weight: 7.0 lbs.Includes: Heavy-duty carrying case, metal cutting blade
D28700 14” Chop Saw - Part No. H1404•15.0 Amp/4.0 HP motor provides overload protection, increasing performance and durability•Quick-lock vise allows for fast clamping on different size materials to increase productivity•45° pivoting fence allows for fast and accurate angle cuts•Steel base allows users to weld jigs or stops directly onto the base•Spindle lock allows users to make wheel changes quickly and easily saving time and money•Integrated top handle allows the saw to be carried around easily•Heavy-duty lock down pin allows the head of the saw to be locked in the carrying position•Adjustable spark guard allows the users to direct sparks away from the work area•On-board wheel change wrench provides convenient storage while reducing the risk of lost wrenches•Compression spring provides smoother movement and increased durability versus torsion springs
SpecificationsAmps: 15.0 AmpsNo Load Speed: 3,800 rpmWheel Arbor: 1”Wheel Diameter: 14”Max Capacity (Round): 4-1/2” Max Capacity (Rectangular): 4-3/4” x 5-1/3”Tool Length: 21” Tool Weight: 35 lbs.Includes: 14” abrasive wheel and wrench
D28700 14” Chop Saw
Reciprocating Saw KitDW368 7-1/4” Circular Saw
�0
www.bobdeansupply.comPowerSaws
D28754 12” Cut-Off Machine - Part No. H1430•Epoxy coated field and armature provide protection against abrasion•Spindle lock button for fast, easy wheel changing•Dust sealed switch protects against dust ingestion•15.0 Amp/5.3 HP (maximum motor HP) motor provides high power and speed for metal and concrete cutting•Adjustable guard for different cutting depths mounted at two points to maintain proper alignment•Rotation directs sparks and debris towards the front of the tool and helps prevent climbing in the cut•Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage•2 wire double insulated ‘S’ jacket rubber cord provides increased durability and life in hot and cold climates
SpecificationsAmps: 6 AmpsMax Capacity (Round): 4-3/4”Tool Length: 21”Tool Weight: 15 lbsIncludes: Wrench, masonry cutting wheel and metal cutting wheel
D28754 12” Cut-Off Machine
ElectricDrills
D21002 3/8” VSR Drill - Part No. H1327•All ball-bearing construction for durability and longer life•Contoured textured handle for better gripping surface & reduced user fatigue•Glass-filled nylon housing is durable, impact resistant and provides lower maintenance costs•Belt clip conveniently holds tool and frees user’s hands
SpecificationsChuck Size: 3/8”Amps: 6.0 AmpsNo Load Speed: 0-2,500 rpmMax Watts Out: 480 WGear Reduction: SingleCapacity in Wood (spade bit): 1”Capacity in Wood (hole saw): 1-1/8”Capacity in Steel (twist bit): 3/8”Tool Weight: 3.2 lbs.Model No.: D21002Includes: Chuck key with holder
DW223G 3/8” VSR Drill - Part No. H1305•Helical-cut steel, heat-treated gears for durability and gear life•Metal gear housing for durability and increased reliability•Two-finger rubber trigger for increased comfort•DIN nose for side handle or rig mount•3-wire grounded plug/cord
SpecificationsChuck Size: 3/8”Amps: 7.0 AmpsNo Load Speed: 0-1,200 rpmMax Watts Out: 560 WGear Reduction: DoubleCapacity in Wood (spade bit): 1-1/4”Capacity in Wood (hole saw): 2-1/8”Capacity in Steel (twist bit): 3/8”Capacity in Steel (hole saw): 1-1/4”Tool Weight: 3.6 lbs.Anti-Slip Grip: YesIncludes: Chuck key with holder
3/8” VSR Drill with 6.0 Amps 3/8” VSR Drill with 7.0 Amps
3/8” Cordless Compact Drill/Driver 3/8” VSR Drill with 6.7 Amps
DC727KA 3/8” Drill/Driver Kit - Part No. H1332•Compact size: fits into the tightest conditions•Lightweight design (3.9 lbs) minimizes user fatigue•High performance motor delivers 230 unit watts•Dual speed range for optimal performance•3/8” single sleeve keyless ratcheting chuck•Maximum durability and reliability for jobsite use
SpecificationsVoltage: 12VMax Power: 230 UWONo. of Speed Settings: 2Max RPM: 0-400 and 0-1,400 rpmClutch Settings: 17Chuck Size: 3/8”Chuck Type: Plastic, single sleeve ratchetingTool Weight: 3.9 lbs.Model No.: DC727KAIncludes: 1 Hour Charger, two 12V compact batteries, double-ended screwdriver bit and heavy-duty kit box
DW222 3/8” VSR Drill - Part No. H1306•Helical-cut steel, heat-treated gears for increased durability and long gear life•Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience•Two-finger trigger for increased comfort
SpecificationsKeyless Chuck: YesChuck Size: 3/8”Amps: 6.7 AmpsNo Load Speed: 0-1,200 rpmMax Watts Out: 520 WGear Reduction: DoubleCapacity in Wood (spade bit): 1-1/4”Capacity in Wood (hole saw): 2-1/8”Capacity in Steel (twist bit): 3/8”Capacity in Steel (hole saw): 1-1/4”Tool Weight: 3.3 lbs.Spindle Lock: Yes
1-800-282-8378
��
ElectricDrills
DW160V 3/8” VSR Right Angle Drill - Part No. H1324•100% ball-bearing construction for durability & longer tool life•Compact right-angle design for easy access in tight places•Paddle switch is ideal for use in awkward positions and limited access areas•Shielded chuck protects user and improves grip in confined areas•Double gear reduction increases torque performance & decreases gear stress
SpecificationsMax Watts Out: 200 WAmps: 3.7 AmpsTool Weight: 3.75 lbs.Capacity in Wood (hole saw): 1-1/8”Capacity in Steel (hole saw): 3/4” Capacity in Steel (twist bit): 3/8”
3/8” VSR Right Angle Drill 1/2” VSR Drill
DW245 1/2” VSR Drill - Part No. H1342•Helical-cut steel, heat-treated gears for increased durability and long gear life•Metal gear housing for durability and increased reliability•Two-finger trigger for increased comfort•Triple gear reduction increases torque & reduces gear stress•360° side handle for greater control and versatility
SpecificationsKeyless Chuck: N/AAmps: 7.8 AmpsNo Load Speed: 0-600 rpmMax Watts Out: 600 WGear Reduction: TripleAnti-Lock Control: NoAnti-Slip Grip: YesTool Weight: 4.4 lbs.Capacity in Wood (spade bit): 1-1/2”Capacity in Wood (self-feed): 2-9/16”Capacity in Wood (hole saw): 4”Capacity in Wood (auger bit): 1-1/2”Capacity in Steel (twist bit): 1/2”Capacity in Steel (hole saw): 2-3/4”Includes: 360° side handle and chuck key with holder
DW235G 1/2” VSR Drill - Part No. H1307•Helical-cut steel, heat-treated gears for increased durability and long gear life•Metal gear housing for durability and increased reliability•Two-finger trigger for increased comfort•360° side handle for greater control and versatility
SpecificationsChuck Size: 1/2”Amps: 7.8 AmpsNo Load Speed: 0-850 rpmMax Watts Out: 600 WGear Reduction: DoubleAnti-Lock Control: NoTool Weight: 4.2 lbs.Anti-Slip Grip: YesCapacity in Wood (spade bit): 1-1/2”Capacity in Wood (self-feed): 2-1-/8”Capacity in Wood (hole saw): 3-1/2”Capacity in Wood (auger bit): 1-1/8”Capacity in Steel (twist bit): 1/2”Capacity in Steel (hole saw): 1-1/2”Includes: 360° side handle and chuck key with holder
1/2” VSR Drill
1/2” Right Angle Drill Kit
DW120K 1/2” Right Angle Drill Kit - Part No. H1347•Three speed ranges: 400/900 rpm for right angle drilling and 600 rpm for straight drilling•5-position side handle offers improved control and versatility in all drilling applications•360° right angle attachment improves access to confined areas for increased productivity•Triple gear reduction for increased torque and reduced gear stress•Die-cast metal gear housing for jobsite durability and tool reliability
SpecificationsNo Load Speed: 400/600/900 rpmAmps: 7.0 AmpsMax Watts Out: 580 WClutch: NoTool Weight: 9.75 lbs.Capacity in Steel (hole saw): 5”Capacity in Steel (twist bit): 1/2”Capacity in Wood (spade bit): 1-1/2”Capacity in Wood (hole saw): 4”Capacity in Wood (auger bit): 1-1/2”Includes: Chuck key with holder, 5-position side handle, allen wrench and heavy-duty kit box
��
www.bobdeansupply.comElectricDrills
DW140 End Handle Drill - Part No. H1345•100% ball-bearing construction for durability and longevity•Die-cast metal gear housing for durability and tool reliability•3-position auxiliary side handle for greater control•Triple gear reduction increases torque and reduces gear stress•D-handle design is ideal for drilling applications where added pressure in needed
SpecificationsChuck Size: 1/2”Tool Weight: 7 lbs.Amps: 7.0 AmpsNo Load Speed: 600 rpmMax Watts Out: 580 WGear Reduction: TripleCapacity in Wood (spade bit): 1-1/2”Capacity in Wood (self feed): 2-1/8”Capacity in Wood (hole saw): 4”Capacity in Wood (auger bit): 1-1/2”Capacity in Steel (twist bit): 1/2”Capacity in Steel (hole saw): 1-1/2”Includes: 3-position side handle and chuck key with holder
1/2” End Handle Drill 1/2” VSR Spade Handle Drill
DW130V VSR Spade Handle Drill- Part No. H1328•Variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling•Increased torque for drilling and mud mixing•Powerful 9.0 AMPS, 120V motor•Lightweight for increased productivity and reduced fatigue•Soft grip handle provides superior comfort and ergonomics•2-position rear spade handle and 3-position side handle gives greater control for all drilling and mixing
SpecificationsChuck Size: 1/2”No Load Speed: 0-550 rpmMax Watts Out: 600 WGear Reduction: TripleCapacity in Wood (spade bit): 1-1/2”Capacity in Wood (self feed): 2-9/16”Capacity in Wood (hole saw): 5”Capacity in Wood (auger bit): 1-1/2”Capacity in Steel (twist bit): 1/2”Capacity in Steel (hole saw): 3”Tool Weight: 7.5 lbs.Amps: 9.0 AmpsIncludes: 3-position side handle, chuck key with holder, and 2-position rear spade handlePower
Screwdrivers
VSR Depth-Sensitive Screwdriver VSR Versa-Clutch® Screwdriver
DW266 VSR Screwdriver - Part No. H1308•Ideal for use with TEKS® screws•Helical-cut steel, heat-treated gears for long life and durability•Metal gear housing for increased durability•Depth-sensitive nosepiece for consistent depth•Comfortable rubber grip and two-finger, rubber trigger
SpecificationsAmps: 6.5 AmpsNo Load Speed: 0-2,500 rpmClutch: StandardTorque: 132 in-lbs.Max Fastener Size: #14Tool Weight: 3.5 lbs.
DW269 Versa-Clutch Screwdriver - Part No. H1326•Helical-cut steel, heat-treated gears for long life & durability•High power motor for metal fastening applications•VERSA-CLUTCH® torque adjustment system to “dial” the proper torque needed to efficiently drive fasteners without stripping or breaking fastener•Rubber-grip and two-finger trigger for increased comfort•Metal nose and gear case for durability on the job
SpecificationsAmps: 6.5 AmpsNo Load Speed: 0-1,000 rpmClutch: VERSA-CLUTCH® SystemTorque: 344 in-lbs.Max Fastener Size: #14Tool Weight: 3.7 lbs.
DW505K VSR Dual Range Hammerdrill - Part No. H1356•7.8 Amp motor provides high performance and overload protection•High/low speed for high speed drilling or high torque applications•360° side handle with depth rod offers greater control, versatility, and increased depth accuracy•Variable speed allows for precise hole placement on work surface•Dual mode: hammerdrill/drill for wood, steel, masonry applications•Two-finger trigger for increased comfort
SpecificationsAmps: 7.8 Amps Max Watts Out: 650 WCapacity: Steel 1/2”; Wood 1-1/2” Concrete Optimum: 3/16” - 3/8”Tool Length: 13” Tool Weight: 4.8 lbs.No Load Speed: 0-1,100/0-2,700 rpm Blows Per Minute: 0-19,000/0-46,000 bpmIncludes: 360° side handle, depth rod, chuck key with holder and heavy duty kit box
Hammer-Drills
1/2” VSR Dual Range Hammerdrill
1-800-282-8378
��
Hammer-Drills
DW511 VSR Single Speed Hammerdrill - Part No. H1349•6.7 Amp motor provides high performance and overload protection•360° side handle with depth rod offers greater control, versatility, and increased depth accuracy•Dual mode: hammerdrill/drill for wood, steel, masonry applications•3.85 lbs. - lightweight design for extended use and less user fatigue•Variable speed allows for precise hole placement on work surface•Two-finger trigger for increased comfort
SpecificationsAmps: 6.7 AmpsMax Watts Out: 550 WNo Load Speed: 0-2,700 rpmBlows Per Minute: 0-46,000 bpmCapacity: Steel 1/2”; Wood 1-1/4”Concrete Optimum: 3/16” - 3/8”Tool Length: 11-1/2”Tool Weight: 3.85 lbs.Includes: 360° side handle, depth rod, chuck key with holder
1/2” VSR Single Speed Hammerdrill
D25303K L-Shape SDS Rotary Hammer Kit- Part No. H1432•2.3 ft-lbs of impact energy for fast drilling and powerful chipping•At only 11-1/2” this hammer is the most compact in the market allowing users to get into tight spaces•Chipping (Hammer-Only) mode permits light chipping applications such as removal of mortar splatter•Dust extraction connection allows the use of the D25300D dust collection system•L-Shape design offers superior balance and control
SpecificationsConcrete Drilling: 1”Wood/Steel Drilling: With adaptor Amps: 7.5 Loaded Speed: 0-800 rpmNo Load Speed: 0-1,100 Blows/Min:0-4,200 bpmWeight: 6.5 lbs
1” L-Shape SDS Rotary Hammer Kit
KeywayBroaches
All required shims are provided.
Broach Size Tolerances Dimensions Shims Required Length of Cut Pressure Required Model Part No.
1/16” - A .0625” - .0635” 1/8” x 5” 0 13/64” - 1-1/8” 390 lbs. 22201 -3/32” - A .0938 - .0948 1/8 x 5 0 13/64 - 1-1/8 780 22202 -1/8” - A .1252 - .1262 1/8 x 5 1 13.64 - 1-1/8 650 22203 -
3/32” - B .0938 - .0948 3/16 x 6-3/4 0 19/64 - 1-11/16 930 22204 -1/8” - B .1252 - .1262 3/16 x 6-3/4 1 19/64 - 1-11/16 720 22205 -5/32”- B .1564 - .1574 3/16 x 6-3/4 1 19/64 - 1-11/16 1320 22206 -3/16” - B .1877 - .1887 3/16 x 6-3/4 1 19/64 x 1-11/16 1860 22207 -3/16” - C .1877 - .1887 3/8 x 11-3/4 1 25/64 - 2-1/2 1540 22208 E09921/4” - C .2502 - .2512 3/8 x 11-3/4 1 25/64 - 2-1/2 2520 22209 E0995
5/16” - C .3127 - .3137 3/8 x 11-3/4 2 25/64 - 2-1/2 3960 22210 E09963/8” - C .3755 - .3765 3/8 x 11-3/4 2 25/64 - 2-1/2 4340 22211 -
Standard Keyway Broaches
��
www.bobdeansupply.comDrills
Straight Shank - High Speed Steel 118° Point - General Purpose
Black Oxide Surface Treatment - Increases wear resistance, reduces galling and chip welding, improves chip flow and increases drill lubricant retention.l
Bright Finish - With polished flutes enhances chip ejection especially for aluminum and other non-ferrous materials.
Titanium Nitride (TiN) Coating - Increases tool surface hardness, wear resistance, heat resistance, chip flow and resits chip welding. Enhanced hole quality at higher speeds and feeds.
All jobber length drills listed below are stocked in Black Oxide Treated by Bob Dean Supply.
Jobber Length Drills
Size Dec.Equiv.
FluteLength OAL Part No.
80 .0135 1⁄8 3⁄4 E4114
79 .0145 1⁄8 3⁄4 E4113
1⁄64 .0156 3⁄16 3⁄4 E4000
78 .0160 3⁄16 7⁄8 E4112
77 .0180 3⁄16 7⁄8 E4111
76 .0200 3⁄16 7⁄8 E4110
75 .0210 1⁄4 1 E4109
74 .0225 1⁄4 1 E4108
73 .0240 5⁄16 11⁄8 E4107
72 .0250 5⁄16 11⁄8 E4106
71 .0260 3⁄8 11⁄4 E4105
70 .0280 3⁄8 11⁄4 E4104
69 .0292 1⁄2 13⁄8 E4103
68 .0310 1⁄2 13⁄8 E4102
1⁄32 .0312 1⁄2 13⁄8 E4001
67 .0320 1⁄2 13⁄8 E4101
66 .0330 1⁄2 13⁄8 E4100
65 .0350 5⁄8 11⁄2 E4099
64 .0360 5⁄8 11⁄2 E4098
63 .0370 5⁄8 11⁄2 E4097
62 .0380 5⁄8 11⁄2 E4096
61 .0390 11⁄16 15⁄8 E4095
60 .0400 11⁄16 15⁄8 E4094
59 .0410 11⁄16 15⁄8 E4093
58 .0420 11⁄16 15⁄8 E4092
57 .0430 3⁄4 13⁄4 E4091
56 .0465 3⁄4 13⁄4 E4090
3⁄64 .0469 3⁄4 13⁄4 E4002
55 .0520 7⁄8 17⁄8 E4089
54 .0550 7⁄8 17⁄8 E4088
53 .0595 7⁄8 17⁄8 E4087
1⁄16 .0625 7⁄8 17⁄8 E4003
52 .0635 7⁄8 17⁄8 E4086
51 .0670 1 2 E4085
50 .0700 1 2 E4084
49 .0730 1 2 E4083
48 .0760 1 2 E4082
Size Dec.Equiv.
FluteLength OAL Part No.
5/64 .0781 1 2 E4004
47 .0785 1 2 E4081
46 .0810 1-1/8 2-1/8 E4080
45 .0820 1-1/8 2-1/8 E4079
44 .0860 1-1/8 2-1/8 E4078
43 .0890 1-1/4 2-1/4 E4077
3/32 .0937 1-1/4 2-1/4 E4005
42 .0935 1-1/4 2-1/4 E4076
41 .0960 1-3/8 2-3/8 E4075
40 .0980 1-3/8 2-3/8 E4074
39 .0995 1-3/8 2-3/8 E4073
38 .1015 1-7/16 2-1/2 E4072
37 .1040 1-7/16 2-1/2 E4071
36 .1065 1-7/16 2-1/2 E4070
7/64 .1094 1-1/2 2-5/8 E4006
35 .1100 1-1/2 2-5/8 E4069
34 .1110 1-1/2 2-5/8 E4068
33 .1130 1-1/2 2-5/8 E4067
32 .1160 1-5/8 2-3/4 E4066
31 .1200 1-5/8 2-3/4 E4065
1/8 .1250 1-5/8 2-3/4 E4007
30 .1285 1-5/8 2-3/4 E4064
29 .1360 1-3/4 2-7/8 E4063
28 .1405 1-3/4 2-7/8 E4062
9/64 .1406 1-3/4 2-7/8 E4008
27 .1440 1-7/8 3 E4061
26 .1470 1-7/8 3 E4060
25 .1495 1-7/8 3 E4059
24 .1520 2 3-1/8 E4058
23 .1540 2 3-1/8 E4057
5/32 .1562 2 3-1/8 E4009
22 .1570 2 3-1/8 E4056
21 .1590 2-1/8 3-1/4 E4055
20 .1610 2-1/8 3-1/4 E4054
19 .1660 2-1/8 2-1/4 E4053
18 .1695 2-1/8 3-1/4 E4052
11/64 .1719 2-1/8 3-1/4 E4010
Size Dec.Equiv.
FluteLength OAL Part No.
17 .1730 2-3/16 3-3/8 E4051
16 .1770 2-3/16 3-3/8 E4050
15 .1800 2-3/16 3-3/8 E4049
14 .1820 2-3/16 3-3/8 E4048
13 .1850 2-5/16 3-1/2 E4047
3/16 .1875 2-5/16 3-1/2 E4011
12 .1890 2-5/16 3-1/2 E4046
11 .1910 2-5/16 3-1/2 E4045
10 .1935 2-7/16 3-5/8 E4044
9 .1960 2-7/16 3-5/8 E4043
8 .1990 2-7/16 3-5/8 E4042
7 .2010 2-7/16 3-5/8 E4041
13/64 .2031 2-7/16 3-5/8 E4012
6 .2040 2-1/2 3-3/4 E4040
5 .2055 2-1/2 3-3/4 E4039
4 .2090 2-1/2 3-3/4 E4038
3 .2130 2-1/2 3-3/4 E4037
7/32 .2187 2-1/2 3-3/4 E4013
2 .2210 2-5/8 3-7/8 E4036
1 .2280 2-5/8 3-7/8 E4035
A .2349 2-5/8 3-7/8 E4118
15/64 .2344 2-5/8 3-7/8 E4014
B .2380 2-3/4 4 E4119
C .2420 2-3/4 4 E4120
D .2460 2-3/4 4 E4121
1/4 E .2500 2-3/4 4 E4015
F .2570 2-7/8 4-1/8 E4123
G .2610 2-7/8 4-1/8 E3124
17/64 .2656 2-7/8 4-1/8 E4016
H .2660 2-7/8 4-1/8 E4125
I .2720 2-7/8 4-1/8 E4126
J .2770 2-7/8 4-1/8 E4127
K .2810 2-15/16 4-1/4 E4128
9/32 .2812 2-15/16 4-1/4 E4017
L .2900 2-15/16 4-1/4 E4129
M .2950 3-1/16 4-3/8 E4130
19/64 .2969 3-1/16 4-3/8 E4018
Size Dec.Equiv.
FluteLength OAL Part No.
N .3020 3-1/16 4-3/8 E4131
5/16 .3125 3-3/16 4-1/2 E4019
O .3160 3-3/16 4-1/2 E4132
P .3230 3-5/16 4-5/8 E4133
Q .3320 3-7/16 4-3/4 E4134
R .3390 3-7/16 4-3/4 E4135
11/32 .3437 3-7/16 4-3/4 E4021
S .3480 3-1/2 4-7/8 E4136
T .3580 3-1/2 4-7/8 E4137
23/64 .3594 3-1/2 4-7/8 E4022
U .3680 3-5/8 5 E4138
3/8 .3750 3-5/8 5 E4023
V .3770 3-5/8 5 E4139
W .3860 3-3/4 5-1/8 E4140
25/64 .3906 3-3/4 5-1/8 E4024
X .3970 3-3/4 5-1/8 E4141
Y .4040 3-7/8 5-1/4 E4142
13/32 .4062 3-7/8 5-1/4 E4025
Z .4130 3-7/8 5-1/4 E4143
27/64 .4219 3-15/16 5-3/8 E4026
7/16 .4375 4-1/16 5-1/2 E4027
29/64 .4531 4-3/16 5-5/8 E4028
15/32 .4687 4-5/16 5-3/4 E4029
31/64 .4844 4-3/8 5-7/8 E4030
1/2 .5000 4-1/2 6 E4031
33/64 .5156 4-13/16 6-5/8 -
17/32 .5312 4-13/16 6-5/8 -
35/64 .5469 4-13/16 6-5/8 -
9/16 .5625 4-13/16 6-5/8 E4032
37/64 .5781 4-13/16 6-5/8 -
19/32 .5938 5-3/16 7-1/8 -
39/64 .6094 5-3/16 7-1/8 -
5/8 .6250 5-3/16 7-1/8 -
41/64 .6406 5-3/16 7-1/8 -
21/32 .6562 5-3/16 7-1/8 -
43/64 .6719 5-5/8 7-5/8 -
11/16 .6875 5-5/8 7-5/8 -
1-800-282-8378
��
Drills
Aircraft Type C Heavy Duty Screw Machine Length Drills
Straight Shank - High Speed Steel 135° Split Point - Treated (Black Oxide)Heavy duty construction, 135° self-centering split point eliminates “walking” and reduces thrust. Short length provides maximum rigidity for increased hole accuracy and extended tool life. Recommended for drilling a widerange of low to medium tensile strength materials.
Size Dec.Equiv.
FluteLength OAL Part No.
60 .0400 1/2 1-3/8 -
59 .0410 1/2 1-3/8 -
58 .0420 1/2 1-3/8 -
57 .0430 1/2 1-3/8 -
56 .0465 1/2 1-3/8 -
3/64 .0469 1/2 1-3/8 -
55 .0520 5/8 1-5/8 -
54 .0550 5/8 1-5/8 -
53 .0595 5/8 1-5/8 -
1/16 .0625 5/8 1-5/8 E4330
52 .0635 11/16 1-11/16 -
51 .0670 11/16 1-11/16 -
50 .0700 11/16 1-11/16 -
49 .0730 11/16 1-11/16 -
48 .0760 11/16 1-11/16 -
5/64 .0781 11/16 1-11/16 E4331
47 .0785 11/16 1-11/16 -
46 .0810 3/4 1-3/4 -
45 .0820 3/4 1-3/4 -
44 .0860 3/4 1-3/4 -
43 .0890 3/4 1-3/4 -
42 .0935 3/4 1-3/4 -
3/32 .0937 3/4 1-3/4 E4332
41 .0960 13/16 1-13/16 -
40 .0980 13/16 1-13/16 -
39 .0995 13/16 1-13/16 -
38 .1015 13/16 1-13/16 -
37 .1040 13/16 1-13/16 -
36 .1065 13/16 1-13/16 -
Size Dec.Equiv.
FluteLength OAL Part No.
7/64 .1094 13/16 1-13/16 E4333
35 .1100 7/8 1-7/8 -
34 .1110 7/8 1-7/8 -
33 .1130 7/8 1-7/8 -
32 .1160 7/8 1-7/8 -
31 .1200 7/8 1-7/8 -
1/8 .1250 7/8 1-7/8 E4334
30 .1285 15/16 1-15/16 -
29 .1360 15/16 1-15/16 -
28 .1405 15/16 1-15/16 -
9/64 .1406 15/16 1-15/16 E4335
27 .1440 1 2-1/16 -
26 .1470 1 2-1/16 -
25 .1495 1 2-1/16 -
24 .1520 1 2-1/16 -
23 .1540 1 2-1/16 -
5/32 .1562 1 2-1/16 E4336
22 .1570 1-1/16 2-1/8 -
21 .1590 1-1/16 2-1/8 -
20 .1610 1-1/16 2-1/8 -
19 .1660 1-1/16 2-1/8 -
18 .1695 1-1/16 2-1/8 -
11/64 .1719 1-1/16 2-1/8 E4337
17 .1730 1-1/8 2-3/16 -
16 .1770 1-1/8 2-3/16 -
15 .1800 1-1/8 2-3/16 -
14 .1820 1-1/8 2-3/16 -
13 .1850 1-1/8 2-3/16 -
3/16 .1875 1-1/8 2-3/16 E4338
Size Dec.Equiv.
FluteLength OAL Part No.
12 .1890 1-3/16 2-1/4 -
11 .1910 1-3/16 2-1/4 -
10 .1935 1-3/16 2-1/4 -
9 .1960 1-3/16 2-1/4 -
8 .1990 1-3/16 2-1/4 -
7 .2010 1-3/16 2-1/4 -
13/64 .2031 1-3/16 2-1/4 E4339
6 .2040 1-1/4 2-3/8 -
5 .2055 1-1/4 2-3/8 -
4 .2090 1-1/4 2-3/8 -
3 .2130 1-1/4 2-3/8 -
7/32 .2187 1-1/4 2-3/8 E4340
2 .2210 1-5/16 2-7/16 -
1 .2280 1-5/16 2-7/16 -
A .2340 1-5/16 2-7/16 -
15/64 .2344 1-5/16 2-7/16 E4341
B .2380 1-3/8 2-1/2 -
C .2420 1-3/8 2-1/2 -
D .2460 1-3/8 2-1/2 -
1/4 E .2500 1-3/8 2-1/2 E4342
F .2570 1-7/16 2-5/8 -
G .2610 1-7/16 2-5/8 -
17/64 .2656 1-7/16 2-5/8 E4343
H .2660 1-1/2 2-11/16 -
I .2720 1-1/2 2-11/16 -
J .2770 1-1/2 2-11/16 -
K .2810 1-1/2 2-11/16 -
9/32 .2812 1-1/2 2-11/16 E4344
L .2900 1-9/16 2-3/4 -
Size Dec.Equiv.
FluteLength OAL Part No.
M .2950 1-9/16 2-3/4 -
19/64 .2969 1-9/16 2-3/4 E4345
N .3020 1-5/8 2-13/16 -
5/16 .3125 1-5/8 2-13/16 E4346
O .3160 1-11/16 2-15/16 -
P .3230 1-11/16 2-15/16 -
21/64 .3281 1-11/16 2-15/16 E4347
Q .3320 1-11/16 2-15/16 -
R .3390 1-11/16 2-15/16 -
11/32 .3437 1-11/16 2-15/16 E4348
S .3480 1-3/4 3-1/16 -
T .3580 1-3/4 3-1/16 -
23/64 .3594 1-3/4 3-1/16 E4349
U .3680 1-13/16 3-1/8 -
3/8 .3750 1-13/16 3-1/8 E4350
V .3770 1-7/8 3-1/4 -
W .3860 1-7/8 3-1/4 -
25/64 .3906 1-7/8 3-1/4 E4351
X .3970 1-15/16 3-5/16 -
Y .4040 1-15/16 3-5/16 -
13/32 .4062 1-15/16 3-5/16 E4352
Z .4130 2 3-3/8 -
27/64 .4219 2 3-3/8 E4353
7/16 .4375 2-1/16 3-7/16 E4354
29/64 .4531 2-1/8 3-9/16 E4355
15/32 .4687 2-1/8 3-5/8 E4356
31/64 .4844 2-3/16 3-11/16 E4357
1/2 .5000 2-1/4 3-3/4 E4358
118° Point - High Speed Steel1424R Round Shank.Expand the size range capacity of 1/2” drill chucks. Recommended for drilling a wide range of materials of low to medium tensile strength.
1/2” Reduced Shank Silver & Deming Drills
Size Dec.Equiv.
FluteLength OAL Part No.
33/64 .5156 3-1/8 6 E4400
17/32 .5312 3-1/8 6 E4401
35/64 .5469 3-1/8 6 E4402
9/16 .5625 3-1/8 6 E4403
37/64 .5781 3-1/8 6 E4404
19/32 .5938 3-1/8 6 E4405
39/64 .6094 3-1/8 6 E4406
5/8 .6250 3-1/8 6 E4407
41/64 .6406 3-1/8 6 E4408
21/32 .6562 3-1/8 6 E4409
43/64 .6719 3-1/8 6 E4410
11/16 .6875 3-1/8 6 E4411
Size Dec.Equiv.
FluteLength OAL Part No.
45/64 .7031 3-1/8 6 E4412
23/32 .7188 3-1/8 6 E4413
47/64 .7344 3-1/8 6 E4414
3/4 .7500 3-1/8 6 E4415
49/64 .7656 3-1/8 6 E4416
25/32 .7812 3-1/8 6 E4417
51/64 .7969 3-1/8 6 E4418
13/16 .8125 3-1/8 6 E4419
53/64 .8281 3-1/8 6 E4420
27/32 .8438 3-1/8 6 E4421
55/64 .8594 3-1/8 6 E4422
7/8 .8750 3-1/8 6 E4423
Size Dec.Equiv.
FluteLength OAL Part No.
57/64 .8902 3-1/8 6 E4424
29/32 .9062 3-1/8 6 E4425
59/64 .9219 3-1/8 6 E4426
15/16 .9375 3-1/8 6 E4427
61/64 .9531 3-1/8 6 E4428
31/32 .9688 3-1/8 6 E4429
63/64 .9844 3-1/8 6 E4430
1 1.0000 3-1/8 6 E4431
1-1/64 1.0156 3-1/8 6 -
1-1/32 1.0312 3-1/8 6 -
1-3/64 1.0469 3-1/8 6 -
1-1/16 1.0625 3-1/8 6 E4433
1-5/64 1.0781 3-1/8 6 -
1-3/32 1.0937 3-1/8 6 -
1-7/64 1.1094 3-1/8 6 -
Size Dec.Equiv.
FluteLength OAL Part No.
1-1/8 1.1250 3-1/8 6 E4435
1-9/64 1.1406 3-1/8 6 -
1-5/32 1.1562 3-1/8 6 E4436
1-11/64 1.1719 3-1/8 6 -
1-3/16 1.1875 3-1/8 6 E4437
1-13/64 1.2031 3-1/8 6 -
1-7/32 1.2188 3-1/8 6 -
1-15/64 1.2344 3-1/8 6 -
1-1/4 1.2500 3-1/8 6 E4439
1-9/32 1.2812 3-1/8 6 -
1-5/16 1.3125 3-1/8 6 E4441
1-21/64 1.3281 3-1/8 6 -
1-3/8 1.3750 3-1/8 6 E4443
1-7/16 1.4375 3-1/8 6 E4445
1-1/2 1.5000 3-1/8 6 E4447
��
www.bobdeansupply.comDrills
Aircraft Extension Drills
Straight Shank - High Speed Steel 135° Split Point - Treated (Black Oxide)
Drilling in mild steel where extra length is required. 135° split point is self-centering and reduces thrust. Sizes #53 and smaller furnished with 135° regular point.
List No. 1390 - 6” Overall Length List No. 1391 - 12” Overall Length
Size Dec.Equiv.
FluteLength
1390 6”Part No.
1391 12”Part No.
60 .0400 11/16 - -
59 .0410 11/16 - -
58 .0420 11/16 - -
57 .0430 3/4 - -
56 .0465 3/4 - -
3/64 .0469 3/4 - -
55 .0520 7/8 - -
54 .0550 7/8 - -
53 .0595 7/8 - -
1/16 .0625 7/8 E4460 E4468
52 .0635 7/8 - -
51 .0670 1 - -
50 .0700 1 - -
49 .0730 1 - -
48 .0780 1 - -
5/64 .0781 1 - -
47 .0785 1 - -
46 .0810 1-1/8 - -
45 .0820 1-1/8 - -
44 .0860 1-1/8 - -
43 .0890 1-1/4 - -
42 .0935 1-1/4 - -
3/32 .0938 1-1/4 - -
41 .0960 1-3/8 - -
40 .0980 1-3/8 - -
39 .0995 1-3/8 - -
38 .1015 1-7/16 - -
37 .1040 1-7/16 - -
36 .1065 1-7/16 - -
7/64 .1094 1-1/2 - -
35 .1100 1-1/2 - -
34 .1110 1-1/2 - -
33 .1130 1-1/2 - -
32 .1160 1-5/8 - -
31 .1200 1-5/8 - -
1/8 .1250 1-5/8 E4461 E4469
30 .1285 1-5/8 - -
29 .1360 1-3/4 - -
Size Dec.Equiv.
FluteLength
1390 6”Part No.
1391 12”Part No.
28 .1405 1-3/4 - -
9/64 .1406 1-3/4 - -
27 .1440 1-7/8 - -
26 .1470 1-7/8 - -
25 .1495 1-7/8 - -
24 .1520 2 - -
23 .1540 2 - -
5/32 .1562 2 - -
22 .1570 2 - -
21 .1590 2-1/8 - -
20 .1610 2-1/8 - -
19 .1660 2-1/8 - -
18 .1695 2-1/8 - -
11/64 .1719 2-1/8 - -
17 .1730 2-3/16 - -
16 .1770 2-3/16 - -
15 .1800 2-3/16 - -
14 .1820 2-3/16 - -
13 .1850 2-5/16 - -
3/16 .1875 2-5/16 E4462 E4470
12 .1890 2-5/16 - -
11 .1910 2-5/16 - -
10 .1935 2-7/16 - -
9 .1960 2-7/16 - -
8 .1990 2-7/16 - -
7 .2010 2-7/16 - -
13/64 .2031 2-7/16 - -
6 .2040 2-1/2 - -
5 .2055 2-1/2 - -
4 .2090 2-1/2 - -
3 .2130 2-1/2 - -
7/32 .2187 2-1/2 - -
2 .2210 2-5/8 - -
1 .2280 2-5/8 - -
A .2340 2-5/8 - -
15/64 .2344 2-5/8 - -
B .2380 2-3/4 - -
C .2420 2-3/4 - -
Size Dec.Equiv.
FluteLength
1390 6”Part No.
1391 12”Part No.
D .2460 2-3/4 - -
1/4 E .2500 2-3/4 E4463 E4471
6 .2610 2-7/8 - -
17/64 .2656 2-7/8 - -
H .2660 2-7/8 - -
I .2720 2-7/8 - -
J .2770 2-7/8 - -
K .2810 2-15/16 - -
9/32 .2812 2-15/16 - -
L .2900 2-15/16 - -
M .2950 3-1/16 - -
19/64 .2969 3-1/16 - -
N .3020 3-1/16 - -
5/16 .3125 3-3/16 - E4472
O .3160 3-3/16 - -
P .3230 3-5/16 - -
21/64 .3281 3-5/16 - -
Q .3320 3/7/16 - -
R .3390 3-7/16 - -
11/32 .3437 3-7/16 - -
S .3480 3-1/2 - -
T .3580 3-1/2 - -
23/64 .3594 3-1/2 - -
U .3680 3-5/8 - -
3/8 .3750 3-5/8 - E4473
V .3770 3-5/8 - -
W .3860 3-3/4 - -
25/64 .3906 3-3/4 - -
X .3970 3-3/4 - -
Y .4040 3-7/8 - -
13/32 .4062 3-7/8 - -
Z .4130 3-7/8 - -
27/64 .4219 3-15/16 - -
7/16 .4375 4-1/16 - E4474
29/64 .4531 4-3/16 - -
15/32 .4687 4-5/16 - -
31/64 .4844 4-3/8 - -
1/2 .5000 4-1/2 - E4475
1-800-282-8378
��
Taps& Dies
Straight Flute Hand Taps
Ground Thread - High Speed Steel List No. 2068 - Machine Screw
Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials. Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer) or bottoming (1-2 thread chamfer).
Size
ThreadsPer Inch No. of
Flutes
PitchDiam.Limit
ThreadLength OAL
Taper Plug Bottom
NC/UNC NF/UNF Part No. Part No. Part No.
0 - 80 2 H1 5/16 1-5/8 - - -
0 - 80 2 H2 5/16 1-5/8 - - -
1 64 - 2 H1 3/8 1-11/16 - - -
1 64 - 2 H2 3/8 1-11/16 - - -
1 - 72 2 H1 3/8 1-11/16 - - -
1 - 72 2 H2 3/8 1-11/16 - - -
2 56 - 3 H1 7/16 1-3/4 - - -
2 56 - 3 H2 7/16 1-3/4 - - -
2 - 64 3 H2 7/16 1-3/4 - - -
3 48 - 3 H1 1/2 1-13/16 - - -
3 48 - 3 H2 1/2 1-13/16 - - -
3 - 56 3 H2 1/2 1-13/16 - - -
4 40 - 3 H2 9/16 1-7/8 E4710 E4711 E4712
4 - 48 3 H2 9/16 1-7/8 E4728 E4729 E4730
4 - 36 3 H2 9/16 1-7/8 - - -
5 40 - 3 H1 5/8 1-15/16 E4713 E4714 E4715
5 40 - 3 H2 5/8 1-15/16 -
5 - 44 3 H2 5/8 1-15/16 E4731 E4732 E4733
6 32 - 3 H1 11/16 2 E4716 E4717 E4718
6 32 - 3 H2 11/16 2 - - -
6 32 - 3 H3 11/16 2 - - -
6 - 40 3 H1 11/16 2 E4734 E4735 E4736
6 - 40 3 H2 11/16 2 -
8 32 - 4 H1 3/4 2-1/8 E4719 E4720 E4721
8 32 - 4 H2 3/4 2-1/8 - - -
8 32 - 4 H3 3/4 2-1/8 - - -
8 - 36 4 H2 3/4 2-1/8 E4737 E4738 D4739
10 24 - 4 H1 7/8 2-3/8 E4722 E4723 E4724
10 24 - 4 H2 7/8 2-3/8 - - -
10 24 - 4 H3 7/8 2-3/8 - - -
10 - 32 4 H1 7/8 2-3/8 E4740 E4741 E4742
10 - 32 4 H2 7/8 2-3/8 - - -
10 - 32 4 H3 7/8 2-3/8 - - -
12 24 - 4 H3 15/16 2-3/8 E4725 E4726 E4727
12 - 28 4 H3 15/16 2-3/8 E4743 E4744 E4745
Fort Myers Branch Clewiston Branch2624 Hanson Street 1310 Evercane RoadFort Myers, FL 33901 Clewiston, FL 33440(800) 282-8378 (800) 282-5186(239) 332-1131 (863) 983-6131(239) 332-7746 Fax (863) 983-9775 [email protected] [email protected]
Check item availability and make secure online purchases with Bob Dean Supply’s eCatalog at
www.bobdeansupply.com
��
www.bobdeansupply.comTaps &Dies
Straight Flute Hand Taps - Fractional Sizes
Ground Thread - High Speed Steel - List No. 2046 - Fractionl
Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials. Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer) or bottoming (1-2 thread chamfer).
Size
ThreadsPer Inch No. of
Flutes
PitchDiam.Limit
ThreadLength OAL
Taper Plug Bottom
NC/UNC NF/UNF Part No. Part No. Part No.
1/4 20 - 4 H1 1 2-1/2 E4600 E4601 E4602
1/4 - 28 4 H1 1 2-1/2 E4660 E4661 E4662
5/16 18 - 4 H2 1-1/8 2-22/32 E4604 E4605 E4606
5/16 - 24 4 H2 1-1/8 2-22/32 E4663 E4664 E4665
3/8 16 - 4 H1 1-1/4 2-15/16 E4608 E4609 E4610
3/8 - 24 4 H1 1-1/4 2-15/16 E4666 E4667 E4668
7/16 14 - 4 H3 1-7/16 3-5/32 E4612 E4613 E4614
7/16 - 20 4 H2 1-7/16 3-5/32 E4669 E4670 E4671
1/2 13 - 4 H1 1-21/32 3-3/8 E4616 E4617 E4618
1/2 - 20 4 H1 1-21/32 3-3/8 E4672 E4673 E4674
9/16 12 - 4 H3 1-21/32 3-19/32 E4620 E4621 E4622
9/16 - 18 4 H2 1-21/32 3-19/32 E4675 E4676 E4677
5/8 11 - 4 H2 1-13/16 3-13/16 E4624 E4625 E4626
5/8 - 18 4 H2 1-13/16 3-13/16 E4678 E4679 E4680
3/4 - 16 4 H1 2 4-1/4 E4681 E4682 E4683
3/4 10 - 4 H3 2 4-1/4 E4628 E4629 E4630
7/8 9 - 4 H4 2-7/32 4-11/16 E4632 E4633 E4634
7/8 - 14 4 H2 2-7/32 4-11/16 E4684 E4685 E4686
1 8 - 4 H4 2-1/2 5-1/8 E4636 E4637 E4638
1 - 12 4 H4 2-1/2 5-1/8 E4687 E4688 E4689
1 - 14 NS 4 H4 2-1/2 5-1/8 E4690 E4691 E4692
1-1/8 7 - 4 H4 2-9/16 5-7/16 E4640 R4641 E4642
1-1/8 - 12 4 H4 2-9/16 5-7/16 E4693 E4694 E4695
1-1/4 - 12 6 H4 2-9/16 5-3/4 E4696 E4697 E4698
1-1/4 7 - 4 H4 2-9/16 5-3/4 E4644 E4645 E4646
1-3/8 6 - 4 H4 3 6-1/16 E4648 E4649 E4650
1-3/8 - 12 6 H4 3 6-1/16 E4699 E4700 E4701
1-1/2 6 - 4 H4 3 6-3/8 E4652 E4653 E4654
1-1/2 - 12 6 H4 3 6-3/8 E4702 E4703 E4704
Taper Pipe Taps
Ground Thread - High Speed Steel - NPT - List No. 2119 Regular Thread
Chamfer - 2 - 3.5” Threads
Regular Thread NPT taper pipe taps are commonly used for tapping pipe fittings and couplings in a wide variety of materials. Assembly requires the use of a thread sealant to ensure a tight seal.
Size Thread Length OAL No. of Flutes Part No.
1/16 - 27 11/16 2-1/8 4 -
1/8 - 27 sm 3/4 2-1/8 4 E4810
1/8 - 27 lg 3/4 2-1/8 4 -
1/4 - 18 1-1/16 2-7/16 4 E4811
3/8 - 18 1-1/16 2-9/16 4 E4812
1/2 - 14 1-3/8 3-1/8 4 E4813
Size Thread Length OAL No. of Flutes Part No.
3/4 - 14 1-3/4 3-1/4 5 E4814
1 - 11-1/2 1-3/4 3-3/4 5 E4815
1-1/4 - 11-1/2 1-3/4 4 5 E4816
1-1/2 - 11-1/2 1-3/4 4-1/4 7 E4817
2 - 11-1/2 1-3/4 4-1/2 7 E4818
1-800-282-8378
��
Taps& Dies
Spiral Point Plug Taps - Fractional
Ground Thread - High Speed Steel - Fractional - Bright Finish
Size
ThreadsPer Inch No. of
Flutes
PitchDiam.Limit
ThreadLength OAL Part No.
NC/UNC NF/UNF
1/4 20 - 2 H1 1 2-1/2 E4750
1/4 20 - 2 H2 1 2-1/2 -
1/4 20 - 2 H3 1 2-1/2 -
1/4 20 - 2 H5 1 2-1/2 -
1/4 20 - 3 H3 1 2-1/2 -
1/4 20 - 3 H5 1 2-1/2 -
1/4 - 28 2 H1 1 2-1/2 E4770
1/4 - 28 2 H2 1 2-1/2 -
1/4 - 28 2 H3 1 2-1/2 -
1/4 - 28 2 H4 1 2-1/2 -
1/4 - 28 3 H2 1 2-1/2 -
1/4 - 28 3 H4 1 2-1/2 -
5/16 18 - 2 H1 1-1/8 2-23/32 E4752
5/16 18 - 2 H2 1-1/8 2-23/32 -
5/16 18 - 2 H3 1-1/8 2-23/32 -
5/16 18 - 2 H5 1-1/8 2-23/32 -
5/16 18 - 3 H3 1-1/8 2-23/32 -
5/16 18 - 3 H5 1-1/8 2-23/32 -
5/16 - 24 2 H1 1-1/8 2-23/32 E4772
5/16 - 24 2 H2 1-1/8 2-23/32 -
5/16 - 24 2 H3 1-1/8 2-23/32 -
5/16 - 24 2 H4 1-1/8 2-23/32 -
5/16 - 24 3 H2 1-1/8 2-23/32 -
5/16 - 24 3 H4 1-1/8 2-23/32 -
3/8 16 - 3 H1 1-1/4 2-15/16 E4754
3/8 16 - 3 H2 1-1/4 2-15/16 -
3/8 16 - 3 H3 1-1/4 2-15/16 -
3/8 16 - 3 H5 1-1/4 2-15/16 -
3/8 - 24 3 H1 1-1/4 2-15/16 E4774
3/8 - 24 3 H2 1-1/4 2-15/16 -
3/8 - 24 3 H3 1-1/4 2-15/16 -
3/8 - 24 3 H4 1-1/4 2-15/16 -
7/16 14 - 3 H2 1-7/16 3-5/32 E4756
7/16 14 - 3 H3 1-7/16 3-5/32 -
7/16 14 - 3 H5 1-7/16 3-5/32 -
7/16 - 20 3 H3 1-7/16 3-5/32 E4776
7/16 - 20 3 H5 1-7/16 3-5/32 -
1/2 13 - 3 H2 1-21/32 3-3/8 E4758
1/2 13 - 3 H3 1-21/32 3-3/8 -
1/2 13 - 3 H5 1-21/32 3-3/8 -
1/2 - 20 3 H1 1-21/32 3-3/8 E4778
1/2 - 20 3 H2 1-21/32 3-3/8 -
1/2 - 20 3 H3 1-21/32 3-3/8 -
1/2 - 20 3 H5 1-21/32 3-3/8 -
5/8 11 - 3 H3 1-13/16 3-13/16 E4760
5/8 11 - 3 H5 1-13/16 3-13/16 -
5/8 - 18 3 H3 1-13/16 3-13/16 -
3/4 10 - 3 H3 2 4-1/4 E4762
3/4 10 - 3 H5 2 4-1/4 -
3/4 - 16 3 H3 2 4-1/4 -
Spiral point taps are designed for machine taping in through holes in a wide variety of materials. The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage. Shallower flutes also result in greater top core strength allowing for higher cutting speeds.
�0
www.bobdeansupply.comTaps &Dies
Spiral Point Plug Taps - Machine Screw
Ground Thread - High Speed SteelList No. 2070 - Machine Screw - Bright Finish
Spiral point taps are designed for machine taping in through holes in a wide variety of materials. The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage. Shallower flutes also result in greater top core strength allowing for higher cutting speeds.
Size
ThreadsPer Inch Pitch Dia.
LimitThreadLength OAL No. of
Flutes Part No.
NC/UNC NF/UNF
0 - 80 H1 5/16 1-5/8 2 -
0 - 80 H2 5/16 1-5/8 2 -
1 64 - H1 3/8 1-11/16 2 -
1 64 - H2 3/8 1-11/16 2 -
1 - 72 H1 3/8 1-11/16 2 -
1 - 72 H2 3/8 1-11/16 2 -
2 56 - H2 7/16 1-3/4 2 -
2 - 64 H2 7/16 1-3/4 2 -
3 48 - H2 1/2 1-13/16 2 -
3 - 56 H1 1/2 1-13/16 2 -
3 - 56 H2 1/2 1-13/16 2 -
4 40 - H1 9/16 1-7/8 2 E4780
4 40 - H2 9/16 1-7/8 2 -
4 - 48 H1 9/16 1-7/8 2 E4792
4 - 48 H2 9/16 1-7/8 2 -
4 - 36 H2 9/16 1-7/8 2 -
5 40 - H1 5/8 1-15/16 2 E4782
5 40 - H2 5/8 1-15/16 2 -
5 - 44 H2 5/8 1-15/16 2 E4794
6 32 - H1 11/16 2 2 E4784
6 32 - H2 11/16 2 2 -
6 32 - H3 11/16 2 2 -
6 - 40 H2 11/16 2 2 E4796
8 32 - H1 3/4 2-1/8 2 E4786
8 32 - H2 3/4 2-1/8 2 -
8 32 - H3 3/4 2-1/8 2 -
8 - 40 H2 3/4 2-1/8 2 E4798
10 24 - H1 7/8 1-3/8 2 E4788
10 24 - H2 7/8 1-3/8 2 -
10 24 - H3 7/8 1-3/8 2 -
10 - 32 H1 7/8 1-3/8 2 E4800
10 - 32 H2 7/8 1-3/8 2 -
10 - 32 H3 7/8 1-3/8 2 -
12 24 - H3 15/16 2-3/8 2 E4790
12 - 28 H3 15/16 2-3/8 2 E4802
Combined Tap and Drill
High Speed SteelList No. 2080 - Fractional and List No. 2080 - Metric
Combined tap and drills drill and tap in a single pass for increased productivity. Recommended for through hole applications up to 2X the nominal diameter of the tap. The self-centering point eliminates the need for center drilling or center punching. Note: Drill point must penetrate the workpiece prior to start of tapping.
TapSize
ThreadsPer Inch Thread
LengthDrillSize
DrillLength OAL Part No.
NC/UNC NF/UNF
1/4 20 - 25/32 .2080 17/32 2-1/2 E4855
1/4 - 28 25/32 .2220 17/32 2-1/2 E4860
5/16 18 - 15/16 .2660 11/16 2-27/32 E4856
5/16 - 24 15/16 .2770 11/16 2-27/32 E4861
3/8 16 - 1-1/16 .3225 13/16 3-3/8 E4857
3/8 - 24 1-1/16 .3395 13/16 3-3/8 E4862
7/16 14 - 1-1/4 .3770 1 3-3/4 E4858
7/16 - 20 1-1/4 .3955 1 3-3/4 E4863
1/2 13 - 1-3/8 .4350 1-1/8 4-1/16 E4869
1/2 - 20 1-3/8 .4580 1-1/8 4-1/16 -
M4 X 0.7 - - 1/2 .1340 3/8 2-1/8 -
M5 X 0.8 - - 5/8 .1700 13/32 2-3/8 -
M6 X 1 - - 25/32 .2030 17/32 2-1/2 -
M8 X 1.25 - - 15/16 .2730 11/16 2-27/32 -
M10 X 1.5 - - 1-1/16 .3440 13/16 3-3/8 -
M12 X 1.75 - - 1-3/8 .4140 1-1/8 4-1/16 -
Adjustable Round Split Dies
Machine Screw SizesCarbon Steel - List No. 1190
Adjustable Round Split dies use a set screw for adjustment of the thread size for precision threading applications.
Thickness13/16” O.D., 1/4” Thick1” O.D., 3/8” Thick
TapSize
ThreadsPer Inch
NC/UNC NF/UNF
0 - 80
1 64 -
1 - 72
2 56 -
2 - 64
3 48 -
3 - 56
4 - 36
4 40 -
4 - 48
TapSize
ThreadsPer Inch
NC/UNC NF/UNF
5 40 -
5 - 44
6 32 -
6 - 40
8 32 -
8 - 36
10 24 -
10 - 32
12 24 -
12 - 28
1-800-282-8378
��
Taps& Dies
Hexagon Rethreading Dies
Carbon Steel
Hexagon Rethreading dies are used in repair and maintenance applications to repair existing bruised or rusty threads. They are not recommended for cutting new threads.
List No. 1266 - FractionalList No. 1266M - MetricList No. 1267 - Taper Pipe - NPT
List No. 1266 Fractional
Size
ThreadsPer Inch Dimensions
Part No.
NC/UNC NF/UNF NS Across Flats Thickness
1/4 20 - - 19/32 1/4 E4900
1/4 - 28 - 19/32 1/4 E4920
5/16 18 - - 11/16 5/16 E4901
5/16 - 24 - 11/16 5/16 E4921
3/8 16 - - 25/32 3/8 E4902
3/8 - 24 - 25/32 3/8 E4922
7/16 14 - - 7/8 7/16 E4903
7/16 - 20 - 7/8 7/16 E4923
1/2 13 - - 1-1/16 1/2 E4904
1/2 - 20 - 1-1/16 1/2 E4924
9/16 12 - - 1-1/16 1/2 E4905
9/16 - 18 - 1-1/16 1/2 E4925
5/8 11 - - 1-1/4 5/8 E4906
5/8 - 18 - 1-1/4 5/8 E4926
11/16 - - 11 1-7/16 3/4 -
11/16 - - 16 1-7/16 3/4 -
3/4 10 - - 1-7/16 3/4 E4907
3/4 - 16 - 1-7/16 3/4 E4927
7/8 9 - - 1-5/8 7/8 E4908
7/8 - 14 - 1-5/8 7/8 E4928
1 8 - - 1-13/16 1 E4909
1 - 12 - 1-13/16 1 E4929
1 - - 14 1-13/16 1 E4934
1-1/8 7 - - 2 1 E4910
1-1/8 - 12 - 2 1 E4930
1-1/4 7 - - 2-3/15 1 E4911
1-1/4 - 12 - 2-3/15 1 E4931
1-3/8 6 - - 2-3/8 1 E4912
1-3/8 - 12 - 2-3/8 1 E4932
1-1/2 6 - - 2-9/16 1 E4913
1-1/2 - 12 - 2-9/16 1 E4933
List No. 1266M Metric
SizeDimensions
Part No.Across Flats Thickness
M5 X 0.8 19/32 1/4 -
M6 X 1 19/32 1/4 E5210
M8 X 1 E5218
M8 X 1.25 11/16 5/16 E5219
M10 X 1.25 E5224
M10 X 1.5 7/8 7/16 E5225
M12 X 1.25 E5230
M12 X 1.75 1-1/16 1/2 E5232
M14 X 1.50 E5236
M14 X 2 1-1/16 1/2 E5238
M16 X 1.50 E5242
M16 X 2 1-1/4 5/8 E5244
M18 X 1.50 E5248
M18 X 2.50 E5252
M20 X 2.5 1-5/8 7/8 E5256
M22 X 2.5 E5260
M24 X 3 E5264
M24 X 2 E5265
List No. 1267 Taper Pipe - NPT
Size ThreadsPer Inch
DimensionsPart No.
Across Flats Thickness
1/8 27 1-1/16 3/8 -
1/4 18 1-1/4 5/8 -
3/8 18 1-7/16 5/8 E4890
1/2 14 1-5/8 3/4 E4891
3/4 14 2 13/16 E4892
1 11-1/2 2-3/8 1 E4893
��
www.bobdeansupply.comToolBits
Carbide Tipped Tool Bits
Carbide tipped tool bits. Assorted styles and sizes. Other styles and sizes are available by special order.
Size Type Model Part No.
1/4” Straight Turn Tool AR4 C5/C6 E08975/16” Straight Turn Tool AL5 C2 E08905/16” Straight Turn Tool AR5 C2 E08923/8” Straight Turn Tool AR6 C5/C6 E08993/8” Straight Turn Tool AL6 C5/C6 E09003/8” Square Nose Tool C6 C5/C6 E09133/8” Straight Turn Tool AR6 C2 E08943/8” 60D Included Thread Tool E6 C2 E0896
7/16” Straight Turn Tool AL7 C5/C6 E09061/2” Straight Turn Tool AR8 C5/C6 E09011/2” Straight Turn Tool AL8 C5/C6 E09021/2” 60D Included Thread Tool E8 C5/C6 E09095/8” Straight Turn Tool AL10 C5/C6 E09053/4” Straight Turn Tool AR12 C5/C6 E09073/4” Straight Turn Tool AL12 C5/C6 E09083/4” 60D Included Thread Tool E12 C5/C6 E0910
High speed steel square tool bits. Assorted styles and sizes. Other styles and sizes are available by special order.
Size Type Part No.
1/4” HSS Square Tool Bit E08765/16” HSS Square Tool Bit E08773/8” HSS Square Tool Bit E08781/2” HSS Square Tool Bit E08803/4” HSS Square Tool Bit E0881
3/16” HSS Square Tool Bit E0875
HSS Square Tool Bits
NutDrivers
•Patented geometry reduces rounding of the hex•Advanced hardening process provides maximum durability•Extra-strength magnets provide strong bit retention
DW2221 1/4” x 2-9/16” Magnetic Nut Driver- Part No. H0020
DW2222 5/16” x 2-9/16” Magnetic Nut Driver - Part No. H0021
DW2223 3/8” x 2-9/16” Magnetic Nut Driver - Part No. H0022
2-9/16” Magnetic Nut Drivers
Fort Myers Branch Clewiston Branch2624 Hanson Street 1310 Evercane RoadFort Myers, FL 33901 Clewiston, FL 33440(800) 282-8378 (800) 282-5186(239) 332-1131 (863) 983-6131(239) 332-7746 Fax (863) 983-9775 [email protected] [email protected]
Check item availability and make secure online purchases with Bob Dean Supply’s eCatalog at
www.bobdeansupply.com
1-800-282-8378
��
Type 30™ Two-Stage Electric Driven Air Compressors
When unsurpassed performance is defined by maximum operating pressure, increased air flow and extended duty cycles, Ingersoll Rand’s Type-30™ air compressor is the product of choice. The legendary Type-30™ provides the most dependable air supply to meet almost any application.Designed for heavy shop or industrial use, Ingersoll-Rand Two-Stage electric air compressors provide the quality and performance that are ideal for most applications and users, including: automotive service and body shops; fleet maintenance; machine shops; production and manufacturing lines; construction; wood working shops; dry cleaners; car washes; maintenance/repair shops; and farms.
Type-30™ Value Package 5 to 15 HP TheValue Package offers an economical and dependable compressed air solution. Perfect for commercial, automotive, and light industrial use. Features durable 100% cast iron construction, automatic start/stop pressure switch operation, manual tank drain and intermitten duty cycle.
Value Package Includes •2-Stage Air Compressor, NEMA1, ODP Motor, ASME Coded Air Receiver•Mounted Motor Starter•Oil Sight Glass
Type-30™ Fully Packaged 5 to 25 HP This is the original. Powerful, durable, reliable, built to last. A legend from the very beginning. Perfect for automotive, heavy-duty commercial and industrial applications where added features and protection are needed. Features Type-30 standard scope with added features and values, automatic start/stop pressure switch operation (5 to 7.5 HP), centrifugal unloader (10 to 25 HP), heavy-duty two-stage inlet filters (20 to 25 HP) and extended duty cycle. Fully packaged for improved air quality and safety monitoring.
Full Package Includes •2-Stage Air Compressor, NEMA1, ODP Motor, ASME Coded Air Receiver•Mounted Motor Starter•Dual Control (10 to 25 HP units only)•Low Oil Level Switch•Electric Drain•Air-Cooled Aftercooler
Model Tank Size andConfiguration
Max Pressure NPT Outlet HP Dimensions
L” x W” x H” Net Weight Capacity@175 psi
2340L5 60-gal Vertical 175 1/2” 5 20 x 33 x 69 400 lbs. 14.7 cfm2340N5 80-gal Vertical 175 1/2” 5 20 x 36 x 69 475 lbs. 14.7 cfm2475N5 80-gal Vertical 175 3/4” 5 26 x 38 x 70 500 lbs. 16.8 cfm2475D5 80-gal Horizontal 175 3/4” 5 67 x 23.5 x 47 535 lbs. 16.8 cfm
2475N7.5 80-gal Vertical 175 3/4” 7.5 26 x 38 x 70 500 lbs. 24.3 cfm2545E10V 120-gal Horizontal 175 3/4” 10 73 x 28 x 51 835 lbs. 35 cfm
2545E10V FP 120-gal Horizontal 175 3/4” 10 73 x 28 x 51 860 lbs. 35.0 cfm2545K10V 120-gal Vertical 175 3/4” 10 44 x 32 x 82 985 lbs. 35.0 cfm7100E15V 120-gal Horizontal 175 1” 15 72 x 28 x 57 1000 lbs. 50 cfm
Model Tank Size andConfiguration
Max Pressure NPT Outlet HP Dimensions
L” x W” x H” Net Weight Capacity@175 psi
2475N5 FP 80-Gallon Vertical 175 3/4” 5 30 x 37 x 73 500 lbs. 16.82475D5 FP 80-Gallon Horizontal 175 3/4” 5 67 x 24 x 47 535 lbs. 16.8
2475N7.5 FP 80-Gallon Vertical 175 3/4” 7.5 26 x 38 x 80 500 lbs. 24.02545E10 FP 120-Gallon Horizontal 175 3/4” 10 72 x 30 x 56 835 lbs. 35.02545K10 FP 120-Gallon Vertical 175 3/4” 10 44 x 32 x 82 850 lbs. 35.07100E15 FP 120-Gallon Horizontal 175 1” 15 72 x 30 x 56 1035 lbs. 50.015TE15 FP 120-Gallon Horizontal 175 1” 15 72 x 34 x 61 1400 lbs. 53.0
2000E20 FP 120-Gallon Horizontal 175 1” 20 75 x 45 x 67 2050 lbs. 72.02000E25 FP 120-Gallon Horizontal 175 1” 25 75 x 45 x 67 2050 lbs. 82.0
AirCompressors
��
www.bobdeansupply.comAirCompressors
Ingersoll-Rand Type-30™ F-Series Two-Stage compressors meet the needs of fleet or field service applications where electric power is not readily available. Featuring truck-bed mounting, the F-Series includes electronic ignition, idle engine control, a 30-gallon ASME receiver, an OSHA approved, fully enclosed belt guard and a weather-resistant powder-coat paint finish.
•Available with easy starting Honda, Kohler, or Kawasaki engines•Fuel efficient idle control•Honda 13 HP -12 volt electric starter, pull start, gas tank, low oil level shutdown, 3 amp recharging system•Kawasaki 11.5 HP - 12 volt electric starter, gas tank, low oil pressure shutdown•Honda 9 HP -- pull or electric start, low oil level shutdown•Kohler 12.5 HP - 12 volt electric starter and gas tank
Model Tank Size / Configuration Max Pressure NPT Outlet HP Dimensions
L” x W” x H” Net Weight Capacity@175 psi
2475F13GH 30-gallon Horizontal 175 3/4” 13 44 x 22 x 41 430 lbs. 25.02475X13GH Baseplate Mounted 175 3/4” 13 44 x 27 x 22 365 lbs. 25.02475F12.5G 30-gallon Horizontal 175 3/4” 12.5 44 x 22 x 46 424 lbs. 24.02475X12.5G Baseplate Mounted 175 3/4” 12.5 43 x 27 x 28 356 lbs. 24.0
2475F11.5GKA 30-gallon Horizontal 175 3/4” 11.5 45 x 22 x 39 425 lbs. 25.02340S9GH-AS (2) 4-gallon Horizontal 175 1” 9 42 x 21 x 32 312 lbs. 13.9
The rotary screw air compressor has become the most popular source of compressed air for industrial applications. A major reason is its simple compression concept.
Air enters a sealed chamber where it is trapped between two contra-rotating rotors. As the rotors intermesh, they reduce the volume of trapped air and deliver it compressed to the proper pressure level. This simple compression concept, with continuous contact cooling, allows the rotary screw air compressor to operate with temperatures approximately one half that generated by a reciprocating compressor. This lower temperature enables the rotary screw air compressor to operate in a “fully loaded” continuous duty cycle 24 hours per day, 365 days per year, if necessary.Its ability to operate for extended periods of time makes the rotary compressor ideal for demanding industrial applications.
Why Rotary?•Designed to provide pulsation-free air 24 hours a day•100% continuous duty•Quiet operation•Energy efficient at full load•Extended service intervals•Reliable long life•Improved air quality
UP-Series Available Through Bob Dean Supply, Inc.•UP Series 5 - 15C HP•UP Series 15 - 50 HP
Boosting your company’s profits was the main goal that Ingersoll Rand had in mind when designing the revolutionary UP-Series line of integrated rotary screw air solutions. So how can a compressed air system help you increase profitability? The answer is really pretty simple: by ensuring that you achieve the highest productivity in your shop while reducing the total costs of ownership to the absolute lowest levels. The UP-Series is more than an integrated air system; it’s a complete air solution designed to maximize the key drivers of profitability in today’s business:
•Ultimate reliability•Shop productivity•Flexibility of operation•Energy efficiency and savings
Type 30™ Two-Stage Gas Driven Air Compressors
UP-Series Rotary Screw Air Compressors